Hi, I'm going out of my mind trying to get to 2.1 but I need to update to the .66 from February.
I'm using Windows 7 32bit and once or twice I have managed to get the phone to start to update but it comes back with error 170. I've tried everything I can think of. Downloaded the drivers and updated but in Device Manager I have either 'HTC Dream ADB Composite Interface' or in disk drives 'HTC Android Phone USB'.
Is there any way I can boot the update from my SD card?
Any help will be fantastic.
I'm having this exact same problem, tried updating the drivers but to no avail. Any help would be appreciated.
Greetings folks,
Try the following :
http://forum.xda-developers.com/showpost.php?p=7404108&postcount=94
Make sure you have the right settings under " USB debugging "
Settings - Applications - Development
Or why not root and use another rom like SenseHero B5.1
This is the one i like the most by far,
Means you have to downgrade your ROM version to 2.73.61.5Â
More information :
http://theunlockr.com/2009/08/27/how-to-root-your-htc-hero-in-one-click/
Nice and easy to follow and ever time i go back to a RRU file from orange only ever lasts about 2 days at the most,
http://www.htcdevscene.co.uk/
Regards
Steven
Thanks for the reply Steven.
Can I just clarify that if I follow the www.theunlockr.com method by rooting the phone I can then load the official .66 firmware? If this is the way to do it, where can I get that firmware from?
To be honest, I'm not wanting to put on any other custom firmwares and I want to update to the HTC official 2.1 firmware only.
Thanks again for any help.
blackg1000 said:
Thanks for the reply Steven.
Can I just clarify that if I follow the www.theunlockr.com method by rooting the phone I can then load the official .66 firmware? If this is the way to do it, where can I get that firmware from?
To be honest, I'm not wanting to put on any other custom firmwares and I want to update to the HTC official 2.1 firmware only.
Thanks again for any help.
Click to expand...
Click to collapse
No no rooting was only to use custom roms,
How ever if it comes to it flash to another rom and then back to .66
First you need to get orange RRU ROM version 2.73.61.5 from
http://www.htc.com/uk/SupportDownload.aspx?p_id=283&cat=2&dl_id=675
Flash this and on first boot you should get a message to advise of a update,
No need to finish setting the phone up but go a head with the download,
Once downloaded it will flash a new radio and reboot,
Then you should have .66
I was still trying to get 2.1 from orange last night,
Ever time i asked it to check for updates it said it was up to date all ready yet still on 15
Back to using a custom rom again today,
Hope your able to get sorted soon folks.
Sorted. Updated it with my mates laptop running Vista. Updating to 2.1 now. THANK GOD!!!
blackg1000 said:
Sorted. Updated it with my mates laptop running Vista. Updating to 2.1 now. THANK GOD!!!
Click to expand...
Click to collapse
Glad your all up and running man,
Can you inform us on how you did it for the information of others !
Any chance of screenies of 2.1 orange rom ?
And is it that much better ?
Regards
Steven
Hi Guys,,,
Hope this is the right place to post this.
My son will be taking my Hero next month when I upgrade to a Samsung galaxy S2 (cant wait) and I want to put the basic, ROM on it for him. Simple but effective...
Can someone pls point me to where I can find it ????
Thanks all
Ian
PS- - Does anyone know if there will be any custom ROM's for the S2 ?
Ian_4614 said:
Hi Guys,,,
Hope this is the right place to post this.
My son will be taking my Hero next month when I upgrade to a Samsung galaxy S2 (cant wait) and I want to put the basic, ROM on it for him. Simple but effective...
Can someone pls point me to where I can find it ????
Thanks all
Ian
PS- - Does anyone know if there will be any custom ROM's for the S2 ?
Click to expand...
Click to collapse
If your phone was branded when you got it, you should look for an RUU from your carriers homepage, else try look at HTC.com under support -> Hero -> Downloads
Try looking in the SGSII forum, there should be some good stuff there
HTC's ROM Downloads are here ...
http://www.htc.com/uk/supportdownloadlist.aspx?p_id=283&act=sd&cat=all
or, if you want more, try here ...
http://shipped-roms.com/index.php?category=android&model=Hero
http://forum.xda-developers.com/showthread.php?t=714519 this have worked for me You can update it to 2.1 afterwards
if you install the original ROM will you lose the root access?
thats ok, my son will be having this phone, so it does not matter... I just can not work out how to install an original ROM... DO I just flash it the same as a custom ROM ?
Sorry to be a pain, but I need a bit of an idiots guide,, coz yes, I am an idiot !!
Can anyone help pls ?
Follow the guide i linked two post above!
Ian_4614 said:
thats ok, my son will be having this phone, so it does not matter... I just can not work out how to install an original ROM... DO I just flash it the same as a custom ROM ?
Sorry to be a pain, but I need a bit of an idiots guide,, coz yes, I am an idiot !!
Can anyone help pls ?
Click to expand...
Click to collapse
to get back to the original ROM download one of the RUU.exe files from one of the sites (see post #3). Once downloaded run the .exe file (if you are on linux you obviously wont be able to run .exe but i have seen somewhere a thread which describes how to run RUU file on linux you would have to find that). Follow the on screen instructions and you will have the original ROM back
p.s. if you have an unbranded hero you want the file 'RUU_Hero_HTC_WWE_3.32.405.1_R_Radio_63.18.55.06P_6.35.15.11_release_signed.exe' from http://shipped-roms.com/index.php?category=android&model=Hero. otherwise choose the file according to your carrier
I believe this method will be more straightforward than the guide
Thanks so much,, wish me luck !!!!
ok, so I downloaded it,, I connected the phone to the PC via USB and ran the programe.
The message comes up after a while saying the Update Utility cannot connect to the phone... Asks me to check it is connected...
Any ideas anyone ????
Ian_4614 said:
ok, so I downloaded it,, I connected the phone to the PC via USB and ran the programe.
The message comes up after a while saying the Update Utility cannot connect to the phone... Asks me to check it is connected...
Any ideas anyone ????
Click to expand...
Click to collapse
Where you running a sense rom and you can try running the ruu file in bootloader and powering on the phone while hold power and back
Hi everybody , i am using an Asus P735 device with a German WM6 Rom installed on it. When trying to upgrade it to an English version 6.0 (since i was unable to find 6.1 for this device, which would definitely be preferable), i receive the following message:
"Cross-language upgrade is not Allowed. Please ensure the upgrade tool language is same as the default language of your device."
The thing is i don't want the "default language of my device". How can i get rid of it?
After lots of searches on the net, including on this forum, i've found no answers and in the few similar cases posted the users were left with no answer.
The Asus language unlock tools is of no help whatsoever on this phone.
Can anybody help me with this device?
The most similar thread on the forum i've discovered is this one:
http://forum.xda-developers.com/showthread.php?t=368107
Thank you very much.
AsusP said:
Hi everybody , i am using an Asus P735 device with a German WM6 Rom installed on it. When trying to upgrade it to an English version 6.0 (since i was unable to find 6.1 for this device, which would definitely be preferable), i receive the following message:
"Cross-language upgrade is not Allowed. Please ensure the upgrade tool language is same as the default language of your device."
The thing is i don't want the "default language of my device". How can i get rid of it?
After lots of searches on the net, including on this forum, i've found no answers and in the few similar cases posted the users were left with no answer.
The Asus language unlock tools is of no help whatsoever on this phone.
Can anybody help me with this device?
The most similar thread on the forum i've discovered is this one:
http://forum.xda-developers.com/showthread.php?t=368107
Thank you very much.
Click to expand...
Click to collapse
for desktop PCs ! if you have by example W7 in French and want to put it in English - I mean to get English package by update- this will not work if you have an OEM license -this is not allowed!
so is that with OEMs if you want to keep license !
for your PDA you must find an unofficial English ROM only! also a way to write it to the phone BUT for this to work DO NOT use Active Sync!
I can't give you more details because don't have a PDA like yours but this problem is interesting
also subscribed to this topic
AsusP said:
Hi everybody , i am using an Asus P735 device with a German WM6 Rom installed on it. When trying to upgrade it to an English version 6.0 (since i was unable to find 6.1 for this device, which would definitely be preferable), i receive the following message:
"Cross-language upgrade is not Allowed. Please ensure the upgrade tool language is same as the default language of your device."
The thing is i don't want the "default language of my device". How can i get rid of it?
After lots of searches on the net, including on this forum, i've found no answers and in the few similar cases posted the users were left with no answer.
The Asus language unlock tools is of no help whatsoever on this phone.
Can anybody help me with this device?
The most similar thread on the forum i've discovered is this one:
http://forum.xda-developers.com/showthread.php?t=368107
Thank you very much.
Click to expand...
Click to collapse
try a way to write firmware without Active Sync read this post to see you need some way like that
http://forum.xda-developers.com/archive/index.php/t-378907.html
ftp.asus.com/pub/ASUS/IA/P735 doesn't works more you have to find somewere a firmware in English as I see no longer Asus support they say this is deprecated sorry to hear that
Hi Ruscan and thank you for your interest in this topic, being the first person to react at all to this problem that has been left unsolved for many years, despite many other people posting about it earlier and who were left with neither solution nor answer/evidence of interest from the side of the developers. I do also think this is an interesting issue that could become even more actual in the future.
So far i was unable to find ANY unoffocial ROM for the P735. I do have the official one (Malaysia) in English though, from Asus's website, yet i do not know how to hack it and eventually install it. Furthermore, i was wondering whether an P750 or P535 ROM could work on a P735 with few modifications, cause the 735 is hardware-wise somewhere between the two.
I am ready to take the time to write the firmware myself yet i have no experience at all in that neither i know from where to start. If to write a new firware then it would be good to finally produce a WM6.1 version for this PDA, instead of the existing 6.0. How to do that, any idea?
Thank you for your explanation and for making this non-sense situation a little bit more clear.
PS: Also, i've read somewhere that the device won't turn-on anymore if upgraded to a different language, does that apply to an update via SD-card as well?
PS2: Installing the Android system on this device would be an option?
..i wonder what would ASUS.UnlockLangID.exe do with your problem..
what's this all about:
p525 had similar problem, that could result in NOT real bricking of device after flash(wrong languague version after reset - device seem to be locked on bootloader then). when tool is used before flash, custom lang roms are working properly(interesting then, what this tool does, btw, as it is launched from WM - so, it may be microflasher, or sth like that).
now...i have strong feeling, that warnings you read about flashing different lang rom, may be related to this ridiculous, small, problem.
issue is, that i do not know, if ASUS.UnlockLangID.exe may help with p735, OR if there's version made for p735.
update: i read this again, slowly:
"Cross-language upgrade is not allowed. Please ensure the upgrade tool language is same as the default language of your device."
...they tell you about upgrade TOOL, not rom.
hmmm, so.. what, if you use tool in languague of...ROM?
maybe unlocklangid code is inside flasher, so using proper updater with proper rom is simple solution?
on the other hand - i am making roms for asuses for years, and i never used default flash method - vide usbloader method(and force mode from BL).
i am not going to encourage you to go this way of thinking, but...
AsusP said:
Hi Ruscan and thank you for your interest in this topic, being the first person to react at all to this problem that has been left unsolved for many years, despite many other people posting about it earlier and who were left with neither solution nor answer/evidence of interest from the side of the developers. I do also think this is an interesting issue that could become even more actual in the future.
So far i was unable to find ANY unoffocial ROM for the P735. I do have the official one (Malaysia) in English though, from Asus's website, yet i do not know how to hack it and eventually install it. Furthermore, i was wondering whether an P750 or P535 ROM could work on a P735 with few modifications, cause the 735 is hardware-wise somewhere between the two.
I am ready to take the time to write the firmware myself yet i have no experience at all in that neither i know from where to start. If to write a new firware then it would be good to finally produce a WM6.1 version for this PDA, instead of the existing 6.0. How to do that, any idea?
Thank you for your explanation and for making this non-sense situation a little bit more clear.
PS: Also, i've read somewhere that the device won't turn-on anymore if upgraded to a different language, does that apply to an update via SD-card as well?
PS2: Installing the Android system on this device would be an option?
Click to expand...
Click to collapse
sorry this is just to test my signature will be back but I do not think Android is an option for your phone it is all about technical specs to port Android on that phone and only Asus will have that
by example I know about a project named Andromnia this is how to use Android on Omnia-WM phone
nice try!! but believe me this is about reverse engineering and does not works for now- no gps/gprs/wifi signal and Android crashes
funny, that andromnia showed me, asus user, that android could be real for REAL PDA's.
andromnia works on p750 when proper kernel is used,
EOT/
---
btw, is author of topic here?
pupakota said:
funny, that andromnia showed me, asus user, that android could be real for REAL PDA's.
andromnia works on p750 when proper kernel is used, so i found ridiculous whining of ..omnia user here. where were users of omnia, when andoid on that device WAS real?
Now, go and focking buy android bs, you ignored andromnia maker for months, do not whine now.
well, HTC killed everything.
btw, is author of topic here?
Click to expand...
Click to collapse
better focus on topic
To be deleted
tell me, what exactly are you trying to use to flash, abi file, exe file, what is it?
cit:
You can extract ABI file and flash you device through SD card
Click to expand...
Click to collapse
sooo..it seems, that updater BUG is reason, not roms itself here.
funny is, that rom cooking for this machine is quite real, if tools i can see are working.
--------------
upd: ok, so, if i see it right, all you need is to:
fully charge battery,
extact exe, get abi,
copy abi to empty sd card(NOT SHDC!),
go to bootloader(hard to say how - try dpad right + soft reset) and
wait.
when update's done, do hard reset.
--------------
of course, i cannot say at this moment, if whole process is safe, it works fine with zinc device(that seem to have identical flash procedures and SAME cross-lang error when manufacturer way of flashing is used(exe)).
i will try to get more info from my mate asap. cross your fingers, and wait a bit.
here's tool you may try to get abi file from original asus updater EXE file:
http://forum.xda-developers.com/showthread.php?t=368401
if it's not working, there's another one, maybe more universal,
http://forum.xda-developers.com/showthread.php?t=511158
btw, are you from Pakistan?
Thanks all of you for your input.
1 - There is NO AsusUnlockLangID.exe for Asus P735 - do not know why.
The one from P535 or P525 is useless on this phone.
2 - Great point about "same-upgrade-tool-language-possibility" yet the official ROM comes in an .exe file that i do not know how to unpack/hack in order to insert the correct ROM or vice-versa.
Could you provide me with some insight for that?
3 - Besides that, do you think a tweaked P750 ROM could work on this phone, or a hybrid P535/735? Wouldn't that be the best/easiest solution, which would in the same way finally create a more advanced ROM for this quite neglected device? The older P535 has even 6.5 ROMs whereas P735 is limited to the basic 6.0. (Does that have any advantage by the way?)
4 - I am open to any way of flashing, given it provides the right result so all your advices are welcome.
Yes, the author is very present
@Pupakota
Ok, thank you, i've just read your last answer. I'm gonna try the tool you're talking about and inform you of the result.
PS: No, i'm not from Pakistan though i love the country, are you from there?
PS2: Any way to port the 6.1 version to P735, to kill two flies in one shot ?
3 - Besides that, do you think a tweaked P750 ROM could work on this phone, or a hybrid P535/735? Wouldn't that be the best/easiest solution, which would in the same way finally create a more advanced ROM for this quite neglected device? The older P535 has even 6.5 ROMs whereas P735 is limited to the basic 6.0. (Does that have any advantage by the way?)
Click to expand...
Click to collapse
PS2: Any way to port the 6.1 version to P735, to kill two flies in one shot ?
Click to expand...
Click to collapse
p750 is different pair of shoes, nothing would be useful in this case. do not try any roms made for different devices(trivia, i know).
-----
i dare to say, that any rom is possible for 735... while searching info, people made every possible build, including 6.5's...ALL chinese :E
rom from exe is exctractable, then fully dumpable, packages are clean and good...
btw, that ABI file is just a renamed rom.bin...
while Activesync method of EXE flashing is wrong, only way of avoiding problem is using SD card flash method then by using that pseudo "abi" file.
dpad to right + softreset should start flash procedure. if not, it may be some key on the right side of the device + soft reset(hard to understand translated chinese...).
but before you decide to try...
could you, AsusP, make photo of bootloader mode?
and please, post link of exe file you were trying to flash, i need it(i mean this english one). for some reason dumped rom from "WWE" version seem to be...hebrew... i really would extract real english rom.
now, only problem is, that besides of one case i did not see any clear information, if sd flash with languague change is safe.
one person wrote it is.
Hi, i'll get back to you ASAP regarding other questions, in the meanwhile here is the link of the firmware in question (that i'm trying to use) :
http://support.asus.com/Download.as...e=P735_FUU_Malaysia.zip#P735_FUU_Malaysia.zip
yup, this one seems to be exactly like one i tried to extract, indeed, it's wwe.
damn, it's OLD
it seems, that cooking custom roms is possible for this device without special problems. new 6.1 or 6.5 should work MUCH faster, than your actual one, or that wwe from asus...
try to make photo of bootloader, and tell me, which version of 735 do you have, 64 mb or 128 mb of ram?
ahh and one last question: do you have original updater with german version of rom, that you CAN flash(i mean, that you have now, in your device)? it may be neccesary, if you ever dare to make further experiments.
"try to make photo of bootloader, and tell me, which version of 735 do you have, 64 mb or 128 mb of ram?"
It is 64MB RAM, same as all Asus P7XX devices i guess, if not upgraded (mine is not).
Sorry, but how do you make photos of the bootloader? Do you mean the update tool?
"ahh and one last question: do you have original updater with german version of rom, that you CAN flash(i mean, that you have now, in your device)? it may be neccesary, if you ever dare to make further experiments."
I have it in the device yes but i don't have the program/CD if that's what you mean. It could be downloaded though from Asus i think...
PS: WWE stands for...?
Sorry, but how do you make photos of the bootloader?
Click to expand...
Click to collapse
Bootloader mode flash(with unpacked from exe rom image on sd card) seem to be Only way to update your device.
I am trying to determine risk linked to this method, so i need photo of LOOK of bootloader mode.
You may enter BL mode by pressing dpad RIGHT and making soft reset, if i am right.
then something should appear, and this is what i want you to photograph it for me(with..camera).
of COURSE, do not put abi image on sd card YET, otherwise you start to update, and we do NOT know yet, if you brick your machine or not.
so, at this moment i just ant to see hot it look like, without flashing, if its typical 525/750 bootloader, not some weird thing, i'd assume, that abi file flashing should not brick machine.
sorry or enigmatic words, cannot explain this easier way.
It is 64MB RAM, same as all Asus P7XX devices i guess, if not upgraded (mine is not).
Click to expand...
Click to collapse
..so not all 735's have 64 mb ram, i'd say, ok?
look, i do not know nothing about your knowledge level, many users of 750's with 128 mb ram are using 64 mb version of roms(typical noob would have no idea to try any different), this is why i mentioned it...
btw, besides using GanFan-ZincROMXtractor's easier way of obtaining rom file from exe is just using restorator, reshack, or similar tool to extract rom at res 152.
result is identical as using zincromextractor, though name of file must be set manually - it is Mars_G4.abi (though, it is not..real abi file, but it doesn't matter).
WWE stands for...?
Click to expand...
Click to collapse
english rom...
what exactly are you trying to use to flash, abi file, exe file, what is it?
xuanmei said:
what exactly are you trying to use to flash, abi file, exe file, what is it?
Click to expand...
Click to collapse
hey, do you have account on one of chinese pda sites?
could you download and post here any 735 kitchen for me, sir?
i'd like to have a look onto it, but for some reason i am not able to register.
WWE World Wide English - got it.
Pupakota thanks a lot for your efforts, i've had a busy schedule these days, i'll paste you all the info soon.
My knowledge level is basic yet i have some experience of programing from before and i'm very keen to learn about this, more than just using the system.
Hi Guys ! Ireally hope you can help me !!! I purchased a lg g2 d802 on a website in germany (where i live). I updated my phone to lolipop. the update process finished without problem. now when i turned the phone on and wanted to use it, the touch screen was not properly working making the phone unusable. i processed a hard reset with the power and volume buttons but it didn t fix the problem. I messaged lg germany, with the imei number they found out that the phone is actually a version for the asian market, thing that i didn t know when i purchased the phone. i tried to get in touch with the website that sold me the phone but i can't. i don t get any answer from them. I guess the problem with the phone is that it was not made to work with the european lolipop update. does any one know, how i could fix that ? i am still a beginner with android. But i can understand technical stuffs quiet good.
ultimat971 said:
Hi Guys ! Ireally hope you can help me !!! I purchased a lg g2 d802 on a website in germany (where i live). I updated my phone to lolipop. the update process finished without problem. now when i turned the phone on and wanted to use it, the touch screen was not properly working making the phone unusable. i processed a hard reset with the power and volume buttons but it didn t fix the problem. I messaged lg germany, with the imei number they found out that the phone is actually a version for the asian market, thing that i didn t know when i purchased the phone. i tried to get in touch with the website that sold me the phone but i can't. i don t get any answer from them. I guess the problem with the phone is that it was not made to work with the european lolipop update. does any one know, how i could fix that ? i am still a beginner with android. But i can understand technical stuffs quiet good.
Click to expand...
Click to collapse
you need to open the phone and look at motherborad to be 100% sure about wich model/variant you have d802/d800/ls980 ect.
read the entire thread here. theres a video on how to.
http://forum.xda-developers.com/lg-g2/general/warning-to-people-bought-phones-ebay-t2991195
raptorddd said:
you need to open the phone and look at motherborad to be 100% sure about wich model/variant you have d802/d800/ls980 ect.
read the entire thread here. theres a video on how to.
http://forum.xda-developers.com/lg-g2/general/warning-to-people-bought-phones-ebay-t2991195
Click to expand...
Click to collapse
Thanks Buddy,
I followed the last tipp of the publisher of the thread you forwarded to me and try to get my money back. It turned up that the Company who sold me the phone finally answered after i reported them to paypal. And now we found a solution to the problem.
Thanks a lot for your help still. I appreciate it.
ultimat971 said:
Thanks Buddy,
I followed the last tipp of the publisher of the thread you forwarded to me and try to get my money back. It turned up that the Company who sold me the phone finally answered after i reported them to paypal. And now we found a solution to the problem.
Thanks a lot for your help still. I appreciate it.
Click to expand...
Click to collapse
you welcomed, you could use that phone just had to flash the correct variant. unless you wanted what you pay for
raptorddd said:
you welcomed, you could use that phone just had to flash the correct variant. unless you wanted what you pay for
Click to expand...
Click to collapse
Yeah exactly ! I don't like to be cheated out
ok, i have another question : now i got another lg g2 on android 4.4.2, it was working perfectly, this time i made sure that it was an european variant before i process any update then i did update the phone and i had exactly the same problem like i had with the other phone. after the update is completed, the phone has touch screen problem. i read a lot of infos on internet and learned how to flash firmwares. i first flash my lg to android 5.0.2, it succeeded but still this screen problem, then i flashed it back to android 4.4.2 and still have this touch screen problem. i wonder now if it s not because i use windows 10 !!! could it be ??
ultimat971 said:
ok, i have another question : now i got another lg g2 on android 4.4.2, it was working perfectly, this time i made sure that it was an european variant before i process any update then i did update the phone and i had exactly the same problem like i had with the other phone. after the update is completed, the phone has touch screen problem. i read a lot of infos on internet and learned how to flash firmwares. i first flash my lg to android 5.0.2, it succeeded but still this screen problem, then i flashed it back to android 4.4.2 and still have this touch screen problem. i wonder now if it s not because i use windows 10 !!! could it be ??
Click to expand...
Click to collapse
am not sure and i dont think it matters . since i dont kow much about KK post this in the help thread in general.
Greetings - I am searching for firmware version y625-u51v100r001c577b108 - 18 November 2015 or later. DE / German would be best but I will try another language if need be to unbrick my phone.
There are links out in the wild for this specific ROM version for Belgium and Holland, but as far as I can tell they are spam/scam links after spending quite some time weeding through them.
Anyone with a legit source for this specific firmware? Alternately, can anyone tell me how to ADB sideload an older version without the error stopping me about not being able to install over a newer image?
Thanks in advance...
bryandonwhite said:
Greetings - I am searching for firmware version y625-u51v100r001c577b108 - 18 November 2015 or later. DE / German would be best but I will try another language if need be to unbrick my phone.
There are links out in the wild for this specific ROM version for Belgium and Holland, but as far as I can tell they are spam/scam links after spending quite some time weeding through them.
Anyone with a legit source for this specific firmware? Alternately, can anyone tell me how to ADB sideload an older version without the error stopping me about not being able to install over a newer image?
Thanks in advance...
Click to expand...
Click to collapse
Try here :****://consumer.huawei.com/nl/support/downloads/detail/index.htm?id=76925&key4=y625
Povoas said:
Try here :****://consumer.huawei.com/nl/support/downloads/detail/index.htm?id=76925&key4=y625
Click to expand...
Click to collapse
Oh! Thanks for that - I swear I had looked for hours and hours. ...but it appears I can't use an update firmware anyway, I guess I need a recovery rom? I cannot boot the phone at all, I can only get to the system screen with the opportunity to ADB sideload. Any other ideas?
Thanks again... I really want to get my phone working again.
All i can find for your device after searching like hell is a Greece ROM, Please click on Direct Link : HERE.
Or Else
Direct Download HERE
NOTE: This ROM have Others works, So I and XDA Community doesn't hold any responsibility if you end up in HARD BRICK or any other problem. I am here just to help you. PLEASE TRY THIS AT YOUR OWN RISK
Salman
If I helped you please click on THANKS button
I suppose you do not have access to recover, right?
Download the recovery compatible (TWRP) from here: ****s://mega.nz/#!X9s3CCLQ!JhC1sJ0MwGsCfQJ7Frs7sI7MfGURo2PjAhESCeS-SDI
Good luck.
However, try to decompress the firmware to a folder, rename the "update.app" to "update.zip".
with the command "adb sideload update.zip", may be to do the complete installation of the ROM.
Warning: If the phone was, for example, Y625-U51-V100R001C577B108, does not accept the installation of the Y625-U51-V100R001C577B103 version. The opposite (update) all right!
Hey bro i have problem with my huawei y625-u51 and can t restore with twrp because while restore he crashed and not turning on
Please tell me how to resolve this problem
What a **** no firmware around y625-51 110
need firmware y625-u51v100r001c577111
Hi guys
I'm having a y625-u51 with the title firmware. I need to do a reset and the most recent update.App I can find is with the 108 at the end.
When I'm trying to apply this, says that cannot install over newer build. Is there a chance to find that firmware update.App from someone or any trick to avoid version check.Note that the phone doesnt boot and was rooted. I can only boot at Android system recovery. Oh and I'm from Greece.
Thanks in advance.
I hope this link would helpful for you. try and let me know
****://consumer.huawei.com/hr/support/downloads/detail/index.htm?id=67705
nosh96 said:
I hope this link would helpful for you. try and let me know
****://consumer.huawei.com/hr/support/downloads/detail/index.htm?id=67705
Click to expand...
Click to collapse
This link is for v100r001c577105, I have the version v100r001c577111 which is Feb 17. So doesnt match.
I have the file you provide but I cannot do the restore because the version on then phone, as you see, it is newer.
Thanks anyway.
Software Huawei Y625-U51 Firmware(V100R001C577B108, Holland)
2016-03-24
http://download-c1.huawei.com/download/downloadCenter?downloadId=76925&siteCode=nl