Database Users

New Firmware 5.0.0-RU1.1.99

You can find it here: ftp://fw.ydevices.com/YotaPhone2/Firmwares/RU/
Install either via OTA update if you're already on the 1.87 RU ROM like I am. On my device it first wanted to install the update only, about 67MB, but it failed to install; then the next time I checked for updates after reboot through the settings update menu, it downloaded the full file, about 0,99 GB. Then the update went all the way through. SuperSU is lost on the way, I will try if it still works through the recovery installation.
You can also install through Yotaflasher like it's explained here: http://forum.xda-developers.com/showthread.php?t=3247356
Didn't have time to test things out, but it's still Lollipop 5.0, so only bugfixes and some new yotapanel features I guess.
Enjoy!

Thanks for that muchly dude, hadn't checked that for a while.
Update seems to be stability improvements, power efficiency improvements and some yotamirror and panel improvements and features.
Its not 5.1, but it's an update, I'll take it.
And yeah, super glad moved to the RU ROM. Backing up now, will OTA flash update once that's done. SuperSU has been flashable everytime after an update so far so fingers crossed.

All up and running .
I was rooted, running RU 1.87 with TWRP - phone handled it all just fine - downloaded OTA, pressed install - it went to TWRP > flashed stock recovery back over itself > rebooted and installed.
Phone booted up, all working fine. Lost root - simple reboot and flash the SU.zip had sitting there from the last update. Cache and Dalvik wiped for good measure.
Reboot and all is well and back to normal but with a few improvements, lovely.
About as easy as it's even been done really.
Hope everyone else gets to enjoy the update through similarly smooth procedures .

Yeah, I ended up doing a fresh installation plus rooting, everything smooth. I'm never too sure what an update leaves behind.
It's really a great device, hopefully they'll keep updating things for a while. Of course version 6.0 would be welcomed... Apparently, by the numbering they use, next step would be either 1.2.xx with Android 5.1 or 2.x.xx with 6.0. Let's see.

Fair play, I toyed with idea of it, but was fresh from last install and honestly don't have the time to set everything up again.
My hope is they take all their good ideas from this and can at least join someone else in making a great device.
Saw a working bendy phone the other day, lets you turn pages on reading app by bending corner as you would a book etc. I thought if that could be combined with yota tech, then you have damn near the perfect tablet.
Honestly I don't think we'll get 5.1, let alone 6.0. They're refining their ideas in prep for Yotaphone 3, that and the possible tablet are their main focus right now.
Interestingly, the update flashed it's stock recovery over twrp - someone prepared for the possibility of root owners this time around. So they are still paying attention .

So any idea what's the difference between the EU and the RU rom? I mean there has to be some reason they are two separate roms.

To answer my own question: there isn't too many differences between EU and RU roms. I did a diff between the RU1.1.59 and EU1.1.60, and out of 2092 files, roughly 1900 of the files inside system.img were identical. The APKs were slightly different, but only slightly. So probably the difference comes from some differently named resources.
The RU version also has some additional apps which the EU version does not have, such as Esquire, Questions, Strelka and Vector. These are probably the main reason why they have different ROMs. They might only work in Russia.

Jeopardy said:
To answer my own question: there isn't too many differences between EU and RU roms. I did a diff between the RU1.1.59 and EU1.1.60, and out of 2092 files, roughly 1900 of the files inside system.img were identical. The APKs were slightly different, but only slightly. So probably the difference comes from some differently named resources.
The RU version also has some additional apps which the EU version does not have, such as Esquire, Questions, Strelka and Vector. These are probably the main reason why they have different ROMs. They might only work in Russia.
Click to expand...
Click to collapse
FYI the difference is essentially the product package configuration (app bundles that are pre-loaded) but there are also some differences between the resources used for the stock apps. One in particular (my personal fav ) is the dialler - the RU variant includes cyrillic characters regardless of language/locale setting (feature). The EU will give you a regular english-only dialler if you're using english locale settings

Vuche said:
You can find it here: ftp://fw.ydevices.com/YotaPhone2/Firmwares/RU/
Install either via OTA update if you're already on the 1.87 RU ROM like I am. On my device it first wanted to install the update only, about 67MB, but it failed to install; then the next time I checked for updates after reboot through the settings update menu, it downloaded the full file, about 0,99 GB. Then the update went all the way through. SuperSU is lost on the way, I will try if it still works through the recovery installation.
You can also install through Yotaflasher like it's explained here: http://forum.xda-developers.com/showthread.php?t=3247356
Didn't have time to test things out, but it's still Lollipop 5.0, so only bugfixes and some new yotapanel features I guess.
Enjoy!
Click to expand...
Click to collapse
Ho to flash the update zip file? I m stuck on 4.4.3...

does nyone know how to flash the file zip into the phone?? i have no idea how it works and i dont find any infos

Does the new update solve the keyboard sensitivity issue??

zute333 said:
numerous guides and how to's in this forum and across XDA, as well as google.
download fastboot + adb > boot to download mode > flash twrp via fastboot commands > boot into twrp > flash zip.
There's obviously more to it than that, up to you to do the research.
Click to expand...
Click to collapse
i'm using this post as a minimalistic guide for myself (so i keep it up with my "discoveries" )
and ofc for been helped by everyone who wants to help me because i am completely new to android world cause this is my first android phone ever!
so.. let's get started!
i downloaded [TOOL] [WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.4.3
version 1.4.3 doesnt works for me so i downloaded the 1.3 as suggested and worked.
then i enabled the download mode following the procedure:
Turn off the phone, then press and hold the volume down key + the power key at the same time. This should boot you into download mode.
Click to expand...
Click to collapse
note: phone MUST be disconnected form pc to be turned off.
now..
*does install twrp invalidate warranty?
EDIT: answer is YES cause of
TWRP 2.8.5.0 YotaPhone 2 recovery image said:
Warning: It is currently not known how to re-lock the bootloader. This means you cannot completely undo the next step as of yet. This might have consequences for sending the device in for repairs, if they check for this, and deem it a (warranty) problem
Click to expand...
Click to collapse
*is installing TWRP a mandatory step?
EDIT: the answer is NO. it seems that the mandatory part is to unlock the bootloader (the bad part for the warranty.. and that can erase ur data..) and this can be done following this guide How to Install TWRP Recovery on YotaPhone 2 untill point 6 included - which i am reporting here for easy of use.
How to Install TWRP Recovery on YotaPhone 2 said:
How to Flash TWRP Recovery on YotaPhone 2
1 - Setup ADB and Fastboot on your Windows PC.
2 - Enable USB debugging from developer options on your YotaPhone 2.
3 - Connect it to PC with a USB cable, if it asks for debugging authorization, permit it.
4 - Go to the folder where you downloaded the TWRP recovery image from the download link above on your PC and open a command window inside that folder by doing “Shift + Right click” on any empty white space inside the folder, then select “Open command window here”.
5 - (Skip this if your bootloader is already unlocked) Now to unlock the bootloader, type in the following command:
└ Beware that unlocking the bootloader may wipe your phone’s data. Make sure to backup first before proceeding.
adb reboot bootloader
Click to expand...
Click to collapse
└ This will reboot your phone to bootloader mode
fastboot oem unlock
Click to expand...
Click to collapse
└ This will unlock bootloader on your device.
6 - Now if your phone has rebooted and is no longer in the bootloader mode, then boot it back into bootloader mode with the “adb reboot bootloader” command.
Click to expand...
Click to collapse
i already downloaded yotaflasher and the last RU firmware 5.0.0-RU1.1.99.zip
NOTE: Russian firmware seems to contain English language. i dont know how to change it later to the favorite one.
NOTE: you need to move the firmware files to the same location as the Flasher tool. Default one is C:\Program Files (x86)\yotaphone_flasher
i tryed to use yotaflasher right now while phone is in download mode and it says:
error: cannot open 'firmware/emnc_appsboot.mbn'
error: cannot open 'firmware/boot.img'
error: cannot open 'firmware/system.img'
error: cannot open 'firmware/recovery.img'
error: cannot open 'firmware/cache.img'
error: cannot open 'firmware/radio/NON-HLOS.bin'
error: cannot open 'firmware/radio/sbli.mbn'
error: cannot open 'firmware/radio/rpm.mbn'
error: cannot open 'firmware/radio/tz.mbn'
error: cannot open 'firmware/enmc_appsboots.mbn'
Would you like to flash userdata[Y/N]:
Click to expand...
Click to collapse
EDIT: placing the firmware in the right folder and unzipping ip let me flash my phone without using any bootloader. now i dont know why but is stucked showing android logo.
i dont know if this happened cause i used the last RU firmware on my stock 4.4.3 android or what..
what do i have to do?:crying::crying::crying:
tnx

Hello guys, I downloaded Lollipop from the ftp but installation fails: no MD5 file found!
I downloaded all russian versions and also the 1.6 EU version... but no way I always get this error.
I'm using TWRP 2.8.5, I guess the last one, and in the tutorials I see this version...
Does anyone know how to solve? :crying:

giocorrado said:
does nyone know how to flash the file zip into the phone?? i have no idea how it works and i dont find any infos
Click to expand...
Click to collapse
The info is described in various posts across the yotaphone forum. Are you rooted? If not then there also many many guides across the internet for that.
Not walking you through the whole process, sorry. We all had to learn, once you do it's all much easier.

It happens also to me...don't panic! press Volume up and the power button and when you enter in the bootloader select the downloading options, it will restart the phone with the "downloading" status
in the meanwhile with the yotaflasher select the option to downloads a firmware and try a different one. When the download is finished try to flash once again.

Melting Blaze said:
i already downloaded yotaflasher and the last RU firmware 5.0.0-RU1.1.99.zip
NOTE: Russian firmware seems to contain English language. i dont know how to change it later to the favorite one.
NOTE: you need to move the firmware files to the same location as the Flasher tool. Default one is C:\Program Files (x86)\yotaphone_flasher
i tryed to use yotaflasher right now while phone is in download mode and it says:
EDIT: placing the firmware in the right folder and unzipping ip let me flash my phone without using any bootloader. now i dont know why but is stucked showing android logo.
i dont know if this happened cause i used the last RU firmware on my stock 4.4.3 android or what..
what do i have to do?:crying::crying::crying:
tnx
Click to expand...
Click to collapse
I placed like you the rom downloaded through website in the firmware folder and flash got wrong. I was blocked on "powered by android" logo like you.
After this almost-bricking experience, I flashed 4.4.3 downloaded all through Flasher and phone was working again.
Then I tried to substitute 5.0 system.img in the folder downloaded through Flasher but no way... after flashing phone didn't boot.
I reflashed 4.4.3 back again and now is working.
I think that we can't put files in folder for Yota Flasher...
I cannot download last 5.0 EU version, like described here: http://forum.xda-developers.com/yot...ially-dead-t3312382/post65839167#post65839167

TKPL said:
I placed like you the rom downloaded through website in the firmware folder and flash got wrong. I was blocked on "powered by android" logo like you.
After this almost-bricking experience, I flashed 4.4.3 downloaded all through Flasher and phone was working again.
Then I tried to substitute 5.0 system.img in the folder downloaded through Flasher but no way... after flashing phone didn't boot.
I reflashed 4.4.3 back again and now is working.
I think that we can't put files in folder for Yota Flasher...
I cannot download last 5.0 EU version, like described here: http://forum.xda-developers.com/yot...ially-dead-t3312382/post65839167#post65839167
Click to expand...
Click to collapse
yeah i've done the same.
i founded the trick i hope
after my big mistake i have done this:
*i downloaded the last 4.4.3-S01-003-EU1.0.3.61a.zip then i flashed it. reminding to unzip it and put it in the right folder of the flasher. remind that this will delete ur data too prob.
*i checked for update on the phone in setting--> about phone --> sistem update
*it downloaded lollipop (android 5.0 Lollipop - 1Gb to download) :laugh:
*i took the 5.0.0-RU1.1.99.zip and flashed it
*u can choose english when the phone boot so dont worry about firmware to be RU
*i checked the firmware version doing the combo "Volume up and the power button" (press it while restarting)
*i changed the language of the phone in setting --> language (there is plenty of languages to choose. i choose mine, italian, but sometimes it happens to find something in english )
i downladed some app etc etc but i never used it for calls cause of the requested nano sim that i'm going to take tomorrow probably cause today i get stucked with trouble about my contacts.
hope to solve the problem for pass my contacts form my nokia N8 to yotaphone 2 quickly!
please let me know if it works for u too
JAMMANDROID said:
It happens also to me...don't panic! press Volume up and the power button and when you enter in the bootloader select the downloading options, it will restart the phone with the "downloading" status in the meanwhile with the yotaflasher select the option to downloads a firmware and try a different one. When the download is finished try to flash once again.
Click to expand...
Click to collapse
yeah. is exactly what i did, but super panicing like a chicken without head

Melting Blaze said:
yeah i've done the same.
i founded the trick i hope
after my big mistake i have done this:
*i downloaded the last 4.4.3-S01-003-EU1.0.3.61a.zip then i flashed it. reminding to unzip it and put it in the right folder of the flasher. remind that this will delete ur data too prob.
*i checked for update on the phone in setting--> about phone --> sistem update
*it downloaded lollipop (android 5.0 Lollipop - 1Gb to download) :laugh:
*i took the 5.0.0-RU1.1.99.zip and flashed it
*u can choose english when the phone boot so dont worry about firmware to be RU
*i checked the firmware version doing the combo "Volume up and the power button" (press it while restarting)
*i changed the language of the phone in setting --> language (there is plenty of languages to choose. i choose mine, italian, but sometimes it happens to find something in english )
i downladed some app etc etc but i never used it for calls cause of the requested nano sim that i'm going to take tomorrow probably cause today i get stucked with trouble about my contacts.
hope to solve the problem for pass my contacts form my nokia N8 to yotaphone 2 quickly!
please let me know if it works for u too
yeah. is exactly what i did, but super panicing like a chicken without head
Click to expand...
Click to collapse
I saw also an update this morning at home on wifi (I wait for the SIM too) because yesterday I flashed the 4.4.3-S01-003-EU1.0.51a: is not the 61 like yours and I received an update alert to 4.4.3-S01-003-EU1.0.3.56. I'm at work, I'll try this evening.
I haven't updated this morning because I was downloading a previous 5.0, the EU 1.44, but when flashing I had error "cannot load firmware/system.img". So I reflashed 4.4.3... I'll try again this evening

giocorrado said:
does nyone know how to flash the file zip into the phone?? i have no idea how it works and i dont find any infos
Click to expand...
Click to collapse
Hi, download YotaFlasher, it permits you to download and flash firmwares in an easy way, and you don't need to know any shell command
---------- Post added at 09:37 AM ---------- Previous post was at 09:25 AM ----------
giocorrado said:
does nyone know how to flash the file zip into the phone?? i have no idea how it works and i dont find any infos
Click to expand...
Click to collapse
TKPL said:
I saw also an update this morning at home on wifi (I wait for the SIM too) because yesterday I flashed the 4.4.3-S01-003-EU1.0.51a: is not the 61 like yours and I received an update alert to 4.4.3-S01-003-EU1.0.3.56. I'm at work, I'll try this evening.
I haven't updated this morning because I was downloading a previous 5.0, the EU 1.44, but when flashing I had error "cannot load firmware/system.img". So I reflashed 4.4.3... I'll try again this evening
Click to expand...
Click to collapse
Hello! I have 5.0!
After flashing and old version of 4.4.3 (my phone went with a 4.4.something branded Vodafone Italy, and they evidently don't give a fork about updates). With the 4.4.3 rev 1.0.51a I immediately received he update to 1.0.56a: I downloaded the 114MB, rebooted, and then got the update to 1.0.61a, around 63MB. I rebooted and then got finally the update to 5.0, 1GB :laugh:
I have only one problem now: the device doesn't recognize when I'm looking at the ink screen, and power button powers on the amoled... Even unlocking through swiping from bottom to top doesn't work. Option is correctly set, I tried to uncheck, reboot, wipe cache and check the option again but it not working well yet.

I have only one problem now: the device doesn't recognize when I'm looking at the ink screen, and power button powers on the amoled... Even unlocking through swiping from bottom to top doesn't work. Option is correctly set, I tried to uncheck, reboot, wipe cache and check the option again but it not working well yet.
Click to expand...
Click to collapse
seems that is the same for a lot of people if not everyone..
cause of this problem i am using this app gravity screen on/off.
it halves the problem cause now i have no problem for the amoled. and for problem i mean use the pwer button instead of simply swipe.
for the e-ink panel i still have to use the power button, only way it works.

I've uninstalled SystemUI.apk on Samsung Galaxy J7 Chinese - Help Me Please!

I rooted my phone to uninstall some bloatwares, but i accidentally uninstalled the SystemUI.apk. My phone is now totally black with a popup saying:
"Unfortunately, SystemUI has stopped"
Ps.: USB Debugging is off
OEM Switch is off
Bootloader is blocked
Help me please! I dont have warranty on this phone.

What is your phone model number (can be found on the sticker behind the battery or the original box that came with the phone)? I can get you the original system files to flash over with no data loss.

Rizzed said:
What is your phone model number (can be found on the sticker behind the battery or the original box that came with the phone)? I can get you the original system files to flash over with no data loss.
Click to expand...
Click to collapse
The phone model number is SM-J7108. The chinese version of Samsung Galaxy J7.
But how i can flash my device with no ADB connection and BootLoader locked?

VeeckDesign said:
The phone model number is SM-J7108. The chinese version of Samsung Galaxy J7.
But how i can flash my device with no ADB connection and BootLoader locked?
Click to expand...
Click to collapse
Boot loader being locked means that custom images will be blocked and thus cannot be flashed. Original images, such as those from Samsung, will be flash able. No ADB connection would be required in the restoring process as we will be using the Download Mode function on your device.
I was just downloading the system image for your phone model and found that the region CHM (China) has only Android 5.1.1 while the region TGY (Hong Kong) has Android 6.0.1 already. In addition, the China firmware has got tons of chinese applications while the Hong Kong firmware does not (only has Samsung stock applications). Do you remember what firmware your phone had? I can then download the appropriate image and/or help you to upgrade (data might be lost).

Rizzed said:
Boot loader being locked means that custom images will be blocked and thus cannot be flashed. Original images, such as those from Samsung, will be flash able. No ADB connection would be required in the restoring process as we will be using the Download Mode function on your device.
I was just downloading the system image for your phone model and found that the region CHM (China) has only Android 5.1.1 while the region TGY (Hong Kong) has Android 6.0.1 already. In addition, the China firmware has got tons of chinese applications while the Hong Kong firmware does not (only has Samsung stock applications). Do you remember what firmware your phone had? I can then download the appropriate image and/or help you to upgrade (data might be lost).
Click to expand...
Click to collapse
Really i don't remember... But it came with a bunch of programs installed on the firmware and others that were trying to install themselves, such as AliExpress or RAM Cleaner. It was probably the Chinese firmware by the amount of advertising and bloatwares present. I had no apps from any phone carrier in my country, just bloatwares and lots of advertisement. That's why I cleaned up the applications and ended up deleting SystemUI.apk, thinking it was some kind of bloatware. You can send me the link of the chinese firmware and the HK too?
And... Could you search for me how to make my mobile phone model go into download mode? I searched around a lot, but found no way. All of them were for the normal Galaxy J7 and opened a blue screen with an exclamation, doing the way they taught my enter Factory Mode, for tests on sensors and more...
Sorry for my bad english, Google Translator is helping me kk

VeeckDesign said:
Really i don't remember... But it came with a bunch of programs installed on the firmware and others that were trying to install themselves, such as AliExpress or RAM Cleaner. It was probably the Chinese firmware by the amount of advertising and bloatwares present. I had no apps from any phone carrier in my country, just bloatwares and lots of advertisement. That's why I cleaned up the applications and ended up deleting SystemUI.apk, thinking it was some kind of bloatware. You can send me the link of the chinese firmware and the HK too?
And... Could you search for me how to make my mobile phone model go into download mode? I searched around a lot, but found no way. All of them were for the normal Galaxy J7 and opened a blue screen with an exclamation, doing the way they taught my enter Factory Mode, for tests on sensors and more...
Sorry for my bad english, Google Translator is helping me kk
Click to expand...
Click to collapse
Is your native language Chinese? Anyways to enter download mode, with your phone fully turned off, press the Volume Down, Home, and Power button until a blue warning screen appears. Then, press the Volume Up button once. To get out of download mode (or to force shut down your device), hold the Volume Down and Power button until the screen turns off. The phone should automatically restart and boot into the system after that.
I assume you know how to use Odin? If you are unsure, I'd suggest not messing around with the system images and use Smart Switch emergency firmware recovery instead. Otherwise, I could provide you detailed steps on how to use Odin.
Anyhow, the links to the official images are here,
https://drive.google.com/open?id=0B6QXDUz9wzc9STdaODk1aFJtOUU
P.S. Google Translate does not understand contexts really well.

Rizzed said:
Is your native language Chinese? Anyways to enter download mode, with your phone fully turned off, press the Volume Down, Home, and Power button until a blue warning screen appears. Then, press the Volume Up button once. To get out of download mode (or to force shut down your device), hold the Volume Down and Power button until the screen turns off. The phone should automatically restart and boot into the system after that.
I assume you know how to use Odin? If you are unsure, I'd suggest not messing around with the system images and use Smart Switch emergency firmware recovery instead. Otherwise, I could provide you detailed steps on how to use Odin.
Anyhow, the links to the official images are here,
https://drive.google.com/open?id=0B6QXDUz9wzc9STdaODk1aFJtOUU
P.S. Google Translate does not understand contexts really well.
Click to expand...
Click to collapse
Thx for the images! My native language is Brazilian Portuguese kk
As I said, this method of entering Download Mode only takes me to Factory Mode. Can you help me with this? Without download mode i can't connect with odin. Is there a way to install update by sd card (Recovery Mode)?

VeeckDesign said:
Thx for the images! My native language is Brazilian Portuguese kk
As I said, this method of entering Download Mode only takes me to Factory Mode. Can you help me with this? Without download mode i can't connect with odin. Is there a way to install update by sd card (Recovery Mode)?
Click to expand...
Click to collapse
Upon prior research I found that most of them are having this problem due to having purchased a fake device (not original; an imitation). These devices have an MTK chip and does not have the Download Mode. Did you buy this set from an official retailer or at least a reputable site? If so I'd suggest that you return this set immediately.
Ads popping out of nowhere and random applications trying to install is already a call for suspicion. I have a J5 2016 at hand and have tried both region's firmware with no such problem occurring. Since this can be identified as a fake device, installing the official Samsung image would "brick" the device as the hardware configuration is marginally different.
Please check your PM.

Rizzed said:
Upon prior research I found that most of them are having this problem due to having purchased a fake device (not original; an imitation). These devices have an MTK chip and does not have the Download Mode. Did you buy this set from an official retailer or at least a reputable site? If so I'd suggest that you return this set immediately.
Ads popping out of nowhere and random applications trying to install is already a call for suspicion. I have a J5 2016 at hand and have tried both region's firmware with no such problem occurring. Since this can be identified as a fake device, installing the official Samsung image would "brick" the device as the hardware configuration is marginally different.
Please check your PM.
Click to expand...
Click to collapse
I bought this cell phone from my aunt, it's certainly a fake copy of the Galaxy J7 ... Is there any way to solve yet? I'm very worried ... Where can I find the "PM"?

Sorry but this is beyond my reach. Perhaps you could post in the Samsung Galaxy J7 XDA forums and request for anyone who has the same device to perhaps do a system dump. Really sorry!

No needed unlock bootloafer to flash stock-factory firmware !!! you can find your model in sammobile & flash with odin or heimdall your stock rom again....

daitalos said:
No needed unlock bootloafer to flash stock-factory firmware !!! you can find your model in sammobile & flash with odin or heimdall your stock rom again....
Click to expand...
Click to collapse
That's the problem right there. His device is not original from Samsung but is an imitation instead. Doing a skim through various threads here about imitation Samsung phones suggests that the hardware configuration is different like having an MTK processor instead of a Qualcomm Snapdragon/Exynos. Flashing the factory firmware would only brick his device, but wouldn't be possible due to the lack of download mode.

Rizzed said:
Sorry but this is beyond my reach. Perhaps you could post in the Samsung Galaxy J7 XDA forums and request for anyone who has the same device to perhaps do a system dump. Really sorry!
Click to expand...
Click to collapse
After a long time, I discovered that my device is actually a system with MTK 6580 chip. Can you find a system for this version of the chip? I found a firmware here, but I can not install it. The DRAM error of SP Tools always appears, indicating that the firmware was not made for my mobile phone model. Could you help me with that?

VeeckDesign said:
After a long time, I discovered that my device is actually a system with MTK 6580 chip. Can you find a system for this version of the chip? I found a firmware here, but I can not install it. The DRAM error of SP Tools always appears, indicating that the firmware was not made for my mobile phone model. Could you help me with that?
Click to expand...
Click to collapse
Did some searching online and did not find any firmware pertaining to your current device, sorry. I could try extracting the systemUI.apk from the original firmware and make it into a flash able zip for you to install. Not sure if it would work, but would you like to try it out?

Rizzed said:
Did some searching online and did not find any firmware pertaining to your current device, sorry. I could try extracting the systemUI.apk from the original firmware and make it into a flash able zip for you to install. Not sure if it would work, but would you like to try it out?
Click to expand...
Click to collapse
Yes, I want to try this. I hope it works.

VeeckDesign said:
Yes, I want to try this. I hope it works.
Click to expand...
Click to collapse
Wait... can I check with you whether you have recovery? Is it TWRP? Could you take a picture of it and post it here? If it's the stock recovery then we would have no way of flashing. Doubt TWRP is made for your device as well too.

Rizzed said:
Wait... can I check with you whether you have recovery? Is it TWRP? Could you take a picture of it and post it here? If it's the stock recovery then we would have no way of flashing. Doubt TWRP is made for your device as well too.
Click to expand...
Click to collapse
Stock recovery
Is there any way to install TWRP?

Note 4 Verizon failing to update to Marshmallow

Hello everyone
Please bear me with me for I am a dinosaur that grew up with Symbian phones, then was forced to use Windows phones and now recently converted to Android, therefore not an expert in this field.
Bought the Note 4 off ebay in UK. Mobile banking app and Android Pay say my phone is rooted however Root Checker says it isn't . I have tried to update to Marshmallow through ODIN but I get the FAIL Auth error every time I try...
In settings the phone shows up as N910F however it is a N910V ... I do need help to figure out the precise model though just to make sure I am installing the correct software.
Also, I am using a Lebara SIM card (partners with Vodafone) here in UK, not sure if that matters.
Would really appreciate if someone would have the patience to guide me how to install Marshmallow on my phone, I just want a clean one and no rooting. Tried different tutorials on the internet but none worked for me or I am surely doing something wrong.
Many thanks in advance!
Andy

Andyyy91 said:
Hello everyone
Please bear me with me for I am a dinosaur that grew up with Symbian phones, then was forced to use Windows phones and now recently converted to Android, therefore not an expert in this field.
Bought the Note 4 off ebay in UK. Mobile banking app and Android Pay say my phone is rooted however Root Checker says it isn't . I have tried to update to Marshmallow through ODIN but I get the FAIL Auth error every time I try...
In settings the phone shows up as N910F however it is a N910V ... I do need help to figure out the precise model though just to make sure I am installing the correct software.
Also, I am using a Lebara SIM card (partners with Vodafone) here in UK, not sure if that matters.
Would really appreciate if someone would have the patience to guide me how to install Marshmallow on my phone, I just want a clean one and no rooting. Tried different tutorials on the internet but none worked for me or I am surely doing something wrong.
Many thanks in advance!
Andy
Click to expand...
Click to collapse
Hi Andy I'm also in the UK with note 4. To find out the correct model you need to boot to download mode. Power off the phone, Hold volume down + home + power together. It will boot to download mode and from there it will show you the model.
Post your correct model here and I will post the firmware with the correct steps to flash.

Hi Callum
In download mode it says N910V

Andyyy91 said:
Hi Callum
In download mode it says N910V
Click to expand...
Click to collapse
Ahh you have the verizon varient.
https://www.sammobile.com/firmwares/download/117781/N910VVRS2CPL1_N910VVZW2CPL1_VZW/
Here is the stock marshmallow firmware for your device.
Download and unzip the firmware. Place it in odin in AP. In odin options enable auto reboot and uncheck repartition. Put phone in download mode, connect to pc and start.

Thanks for the firmware , that worked like a charm. Is it possible to install a non-Verizon version on this phone? One that does not have the Verizon preloaded apps?
Also, do you know anything about the Note 4 getting the Nougat update?

Andyyy91 said:
Thanks for the firmware , that worked like a charm. Is it possible to install a non-Verizon version on this phone? One that does not have the Verizon preloaded apps?
Also, do you know anything about the Note 4 getting the Nougat update?
Click to expand...
Click to collapse
You can only flash firmware for your device which is N910V. Which means unfortunately you can only flash verizon firmware. However you can root your phone and use titanium backup to remove the bloat.
As for the N update I have read and heard rumours that we will get it but I don't have my hopes up. Even though the Note 4 is 2 years old it's still a high end device. It hasn't been officially announced yet. Only been announced for s6/s7 and future releases

callumbr1 said:
Hi Andy I'm also in the UK with note 4. To find out the correct model you need to boot to download mode. Power off the phone, Hold volume down + home + power together. It will boot to download mode and from there it will show you the model.
Post your correct model here and I will post the firmware with the correct steps to flash.
Click to expand...
Click to collapse
Hello. I'm also having this problem with SM-N910C, care to help? Thanks.

J73 said:
Hello. I'm also having this problem with SM-N910C, care to help? Thanks.
Click to expand...
Click to collapse
What is the problem?

callumbr1 said:
What is the problem?
Click to expand...
Click to collapse
It fails to upgrade to Marshmallow.

J73 said:
It fails to upgrade to Marshmallow.
Click to expand...
Click to collapse
What region are you in?
Is your phone network locked?

callumbr1 said:
What region are you in?
Is your phone network locked?
Click to expand...
Click to collapse
I got it from UAE but I'm currently in the Philippines. I don't think it is network locked.

J73 said:
I got it from UAE but I'm currently in the Philippines. I don't think it is network locked.
Click to expand...
Click to collapse
https://www.sammobile.com/firmwares/download/117967/N910CXXS2DPL1_N910COJV2DPI1_XSG/
Download and flash this.
Are you familiar on how to flash with odin?

callumbr1 said:
https://www.sammobile.com/firmwares/download/117967/N910CXXS2DPL1_N910COJV2DPI1_XSG/
Download and flash this.
Are you familiar on how to flash with odin?
Click to expand...
Click to collapse
It's my first time right now.

J73 said:
It's my first time right now.
Click to expand...
Click to collapse
1st download the firmware.
Download odin, latest version is fine but I use v3.10.6
On phone settings go to about device, tap build number 7 times until developer options is there, go on developer options and enable USB debugging.
Plug phone to pc to make sure drivers are up to date.
Once firmware is downloaded unzip it.
Power off phone and put into download mode, vol down + home + power.
Open odin and click AP, insert the firmware. Odin options should be, re partition UNCHECKED, auto reboot checked, f reset time checked.
Plug phone into pc, in odin log it will say added with blue box saying com:3 or similar.
Press start and it will flash and reboot. The first boot can loop a few times or hang on the Samsung logo for a little while it's normal.
If it hangs for more than 15 minutes remove the battery for a few minutes then power on again and it will boot.
If you get any errors or are unsure let me know.

callumbr1 said:
1st download the firmware.
Download odin, latest version is fine but I use v3.10.6
On phone settings go to about device, tap build number 7 times until developer options is there, go on developer options and enable USB debugging.
Plug phone to pc to make sure drivers are up to date.
Once firmware is downloaded unzip it.
Power off phone and put into download mode, vol down + home + power.
Open odin and click AP, insert the firmware. Odin options should be, re partition UNCHECKED, auto reboot checked, f reset time checked.
Plug phone into pc, in odin log it will say added with blue box saying com:3 or similar.
Press start and it will flash and reboot. The first boot can loop a few times or hang on the Samsung logo for a little while it's normal.
If it hangs for more than 15 minutes remove the battery for a few minutes then power on again and it will boot.
If you get any errors or are unsure let me know.
Click to expand...
Click to collapse
Thank you! I'll keep you updated.

callumbr1 said:
1st download the firmware.
Download odin, latest version is fine but I use v3.10.6
On phone settings go to about device, tap build number 7 times until developer options is there, go on developer options and enable USB debugging.
Plug phone to pc to make sure drivers are up to date.
Once firmware is downloaded unzip it.
Power off phone and put into download mode, vol down + home + power.
Open odin and click AP, insert the firmware. Odin options should be, re partition UNCHECKED, auto reboot checked, f reset time checked.
Plug phone into pc, in odin log it will say added with blue box saying com:3 or similar.
Press start and it will flash and reboot. The first boot can loop a few times or hang on the Samsung logo for a little while it's normal.
If it hangs for more than 15 minutes remove the battery for a few minutes then power on again and it will boot.
If you get any errors or are unsure let me know.
Click to expand...
Click to collapse
It worked flawlessly! Thank you so much!

J73 said:
It worked flawlessly! Thank you so much!
Click to expand...
Click to collapse
Not a problem

Callum , thanks for all your help. Will keep my eyes on the update news, I'm curious the see if we will get it aswell

Andyyy91 said:
Callum , thanks for all your help. Will keep my eyes on the update news, I'm curious the see if we will get it aswell
Click to expand...
Click to collapse
If you see anything post it here to keep me updated

Will do

P9 Lite wont turn on

Hello everyone, have been a long time
I have a VNS-L21 (P9 Lite 2016) from Colombia, it worked fine but I started to get more and more ads over the time so I decided to unlock the bootloader and root it, and I did it, after almost a year of working just fine, the phone start to restart by itself with no reason around 1 or 2 days per month, they were not scheduled or something.
Last night the phone started to restart by itself again, but this time after it turned on completely it went off some minutes later and started to restart several times without reason, I got frustrated so I decided to uninstall root (thought it was the problem) but the problem was still there, turn on and after some minutes it went off and restart.
Then I decided to check for updates and it had a pending update so I chose to install it but after restart, it won’t come on and kept in an endless boot loop.
Can anyone help me and tell me what to do? Thanks in advance...

fr4nk32 said:
Hello everyone, have been a long time
I have a VNS-L21 (P9 Lite 2016) from Colombia, it worked fine but I started to get more and more ads over the time so I decided to unlock the bootloader and root it, and I did it, after almost a year of working just fine, the phone start to restart by itself with no reason around 1 or 2 days per month, they were not scheduled or something.
Last night the phone started to restart by itself again, but this time after it turned on completely it went off some minutes later and started to restart several times without reason, I got frustrated so I decided to uninstall root (thought it was the problem) but the problem was still there, turn on and after some minutes it went off and restart.
Then I decided to check for updates and it had a pending update so I chose to install it but after restart, it won’t come on and kept in an endless boot loop.
Can anyone help me and tell me what to do? Thanks in advance...
Click to expand...
Click to collapse
Hello,
I bet that along with the root you also had a custom recovery.
So if before you install the update you have re-flashed the stock recovery, simply hold vol + and power button until it restarts in e-recovery mode. At this point make a factory reset and wipe cache.
Reboot system, done.
If instead you have not reinstalled the stock recovery, download one for the system you use (android 6 or 7) and install it via fastboot. ( you can download a rom the same version you use and extract recovery with extractor.
There are two recovery.img in the rom, just take recovery, NOT recovery2 ).
Try to reboot with vol + and power until you turn it on,
then factory reset in custom recovery.
Reboot in fastboot mode, install stock recovery, reboot system and launch again the update.
Happy holidays and good luck

Dadditz said:
Hello,
I bet that along with the root you also had a custom recovery.
So if before you install the update you have re-flashed the stock recovery, simply hold vol + and power button until it restarts in e-recovery mode. At this point make a factory reset and wipe cache.
Reboot system, done.
If instead you have not reinstalled the stock recovery, download one for the system you use (android 6 or 7) and install it via fastboot. ( you can download a rom the same version you use and extract recovery with extractor.
There are two recovery.img in the rom, just take recovery, NOT recovery2 ).
Try to reboot with vol + and power until you turn it on,
then factory reset in custom recovery.
Reboot in fastboot mode, install stock recovery, reboot system and launch again the update.
Happy holidays and good luck
Click to expand...
Click to collapse
Hello, thanks for answer
Yes, I still have the custom recovery and I was using nougat, where can I find an stock recovery for nougat? I wasn't able to use firmware finder (didn't understand how to use it).. does the recovery in rollback package works for this? just asking...
or can someone provide an stock rom compatible with my phone?
sorry for my bad engish and my little knowledge of all this, thanks in advance.

fr4nk32 said:
Hello, thanks for answer
Yes, I still have the custom recovery and I was using nougat, where can I find an stock recovery for nougat? I wasn't able to use firmware finder (didn't understand how to use it).. does the recovery in rollback package works for this? just asking...
or can someone provide an stock rom compatible with my phone?
sorry for my bad engish and my little knowledge of all this, thanks in advance.
Click to expand...
Click to collapse
No worries dude my english is very bad too......
So, you're in nougat L21, but what is your complete firmware ? (example L21C432B504)
Then download from official THREAD Firmware Finder for PC and unzip in a folder on your desktop.
Launch FF and go to COMMON BASE tab.
Type your complete firmware into search space and click on the search button...
Find FULL OTA MF firmware, tap on FILELIST tab, a pop up will appear...
Select the whole link of ONLY update.zip and copy/past into your browser for download...
Once downloaded, unzip to a folder on your desktop.
Download Huawei Update Extractor you find here on XDA...
Launch HUE and select UPDATE.APP you find into folder you just unzipped from upadate.zip...
Now you'll see two recovery, just select recovery.img and with mouse's* right key extract somewere on your desktop...
Done dude you have stock recovery....
Copy that .img recovery into your adb/fastboot folder (very important) and reboot in fastboot mode.
If you don't have adb/fastboot just download here from XDA..
From PC with terminal launch "fastboot flash recovery
(name.of.recovery).img" and recovery will be flashed.
Now you have stock recovery and can make stock ota update correctly.
Hope all will take right way, feel free to ask.
Good luck :fingers-crossed:
edit: * added

Dadditz said:
No worries dude my english is very bad too......
So, you're in nougat L21, but what is your complete firmware ? (example L21C432B504)
Then download from official THREAD Firmware Finder for PC and unzip in a folder on your desktop.
Launch FF and go to COMMON BASE tab.
Type your complete firmware into search space and click on the search button...
Find FULL OTA MF firmware, tap on FILELIST tab, a pop up will appear...
Select the whole link of ONLY update.zip and copy/past into your browser for download...
Once downloaded, unzip to a folder on your desktop.
Download Huawei Update Extractor you find here on XDA...
Launch HUE and select UPDATE.APP you find into folder you just unzipped from upadate.zip...
Now you'll see two recovery, just select recovery.img and with mouse's* right key extract somewere on your desktop...
Done dude you have stock recovery....
Copy that .img recovery into your adb/fastboot folder (very important) and reboot in fastboot mode.
If you don't have adb/fastboot just download here from XDA..
From PC with terminal launch "fastboot flash recovery.img" and recovery will be flashed.
Now you have stock recovery and can make stock ota update correctly.
Hope all will take right way, feel free to ask.
Good luck :fingers-crossed:
edit: * added
Click to expand...
Click to collapse
Hello again
thanks for your help, your guide is really useful
One more thing (excuse me for my little knowledge about this) I don't know what's the exact firmware for my phone, I mean I know it is VNS-L21 and should end B3xx but don't know which C... (I didn't check before the cellphone started to bootloop).
I search around the web and found some recommend the C432 one so I download the update.zip from it, would it have any problem if I flash the recovery from there?
And last thing, Can I flash recovery with P9 lite Toolkit? or just through adb? thanks in advance.

fr4nk32 said:
Hello again
thanks for your help, your guide is really useful
One more thing (excuse me for my little knowledge about this) I don't know what's the exact firmware for my phone, I mean I know it is VNS-L21 and should end B3xx but don't know which C... (I didn't check before the cellphone started to bootloop).
I search around the web and found some recommend the C432 one so I download the update.zip from it, would it have any problem if I flash the recovery from there?
And last thing, Can I flash recovery with P9 lite Toolkit? or just through adb? thanks in advance.
Click to expand...
Click to collapse
Dude at this step how can you tell you were on nougat ?
Is your device branded / unbranded one ?
I searched for Colombia firmware and L21 device don't exist, please check behind the cover,
it's wrote at the bottom. ( maybe L23 one ? )
Try to someway backup your stuff then
reboot with vol+ and power button to recovery, tap WIPE then SWIPE to factory reset.
If boot correctly see inside wich is your complete firmware.
C432 are for european area devices, teoratically should work, but will not risk...
Recovery.img can be easily be flashed with toolkit, i used it a lot of times...

Dadditz said:
Dude at this step how can you tell you were on nougat ?
Is your device branded / unbranded one ?
I searched for Colombia firmware and L21 device don't exist, please check behind the cover,
it's wrote at the bottom. ( maybe L23 one ? )
Try to someway backup your stuff then
reboot with vol+ and power button to recovery, tap WIPE then SWIPE to factory reset.
If boot correctly see inside wich is your complete firmware.
C432 are for european area devices, teoratically should work, but will not risk...
Recovery.img can be easily be flashed with toolkit, i used it a lot of times...
Click to expand...
Click to collapse
Hey dude
You really know about this, I'm sure because I updated the phone to Nougat before unlock and root it, time after an update came but I ignore it (I know it was a security updated not sure which one).
Yes, I just checked my phone in the backpart and it is L23, my bad, when you say branded it means if it is related to a phone/internet company? No, it is not tied to any company, I bought it free from internet.
I really don't care about backing up, if it starts from zero or is back to previous stage is fine for me since it can turn on and use it .
Cheers!

fr4nk32 said:
Hey dude
You really know about this, I'm sure because I updated the phone to Nougat before unlock and root it, time after an update came but I ignore it (I know it was a security updated not sure which one).
Yes, I just checked my phone in the backpart and it is L23, my bad, when you say branded it means if it is related to a phone/internet company? No, it is not tied to any company, I bought it free from internet.
I really don't care about backing up, if it starts from zero or is back to previous stage is fine for me since it can turn on and use it .
Cheers!
Click to expand...
Click to collapse
OK, since from first time i saw this post i thinked was a hardware problem, hope no....
You have to reboot to recovery holding vol+ and power button until a recovery will appear.
Then make a factory reset as already wrote in previous post.

Dadditz said:
OK, since from first time i saw this post i thinked was a hardware problem, hope no....
You have to reboot to recovery holding vol+ and power button until a recovery will appear.
Then make a factory reset as already wrote in previous post.
Click to expand...
Click to collapse
Hi there
Sorry for the late reply...
I managed to turn on the phone updating it through dload method (installing stock kernel and trying to update it with erecovery didn't work) without your help I wouldn't know how to to download the right firmware for my phone. Now, my phone is working "properly".
BUT my phone show a new update, when I tried to install it, it says "your device fail verification and may not work properly" and won't install the update, after that if I reboot the phone it will show your device... sign in red letters and won't turn on without choosing continue (when I was using custom kernel, it will show some letters in orange I think, but will turn on by itself without pressing continue) when I installed the firmware through dload I didn't see that message till I try to update the phone.
Thanks in advance and a very happy new year!.

fr4nk32 said:
Hi there
Sorry for the late reply...
I managed to turn on the phone updating it through dload method (installing stock kernel and trying to update it with erecovery didn't work) without your help I wouldn't know how to to download the right firmware for my phone. Now, my phone is working "properly".
BUT my phone show a new update, when I tried to install it, it says "your device fail verification and may not work properly" and won't install the update, after that if I reboot the phone it will show your device... sign in red letters and won't turn on without choosing continue (when I was using custom kernel, it will show some letters in orange I think, but will turn on by itself without pressing continue) when I installed the firmware through dload I didn't see that message till I try to update the phone.
Thanks in advance and a very happy new year!.
Click to expand...
Click to collapse
Dear forgive me, even for me English it's not my main language and maybe
i did not grab everything you posted. Did you use the dload method?
So you were on EMUI 4 / android 6, but now? If I understand correctly when you turn
on the device, see the red lines and press the power button to boot into the system?
If so, unlock again the bootloader.
If you want to post some screenshots so as to simplify ...
Best regards

Dadditz said:
Dear forgive me, even for me English it's not my main language and maybe
i did not grab everything you posted. Did you use the dload method?
So you were on EMUI 4 / android 6, but now? If I understand correctly when you turn
on the device, see the red lines and press the power button to boot into the system?
If so, unlock again the bootloader.
If you want to post some screenshots so as to simplify ...
Best regards
Click to expand...
Click to collapse
Hi there
I have been so busy these days, and I'm thinking in get another phone.
The red letters are still appearing, I cant install updates and it is driving me crazy.
Yes, i did use dloaad method and it turned on but after that it doesnt install the updates neither through dload method. I'm on EMUI 5, it says the bootloader is already unlocked
here are some pictures....

fr4nk32 said:
Hi there
I have been so busy these days, and I'm thinking in get another phone.
The red letters are still appearing, I cant install updates and it is driving me crazy.
Yes, i did use dloaad method and it turned on but after that it doesnt install the updates neither through dload method. I'm on EMUI 5, it says the bootloader is already unlocked
here are some pictures....
Click to expand...
Click to collapse
Hey dude,
Don't worry about replying soon or late,
we all have our personal stuff to do in our lifes...
You' ve been lucky you don't bricked your device using dload method
on your nougat/android 7 rom version.
This is allowed only to downgrade to a precedent android version (in your case android 6/Marshmallow...)
Even it says your bootloader is unlocked, it isn't, so backup your stuff and unlock it again.
Once unlocked, factory reset will start. When finished do wipe cache too...
Booting into the system will now show yellow (not red) lines and after a bit will automatically boot.
Will take some minutes... ( prepare a coffee )
Set up your phone and look forward for updates...
If all will take right direction, new update will completely lock the bootloader
and at the reboot no yellow or red lines will appears. :fingers-crossed:
Voilà, complete stock with latest firmware.
Take your coffee and enjoy :laugh:
Best regards
P.S.: Remove or obscure the screenshot with imei codes ( it's sensitive datas )

Dadditz said:
Hey dude,
Don't worry about replying soon or late,
we all have our personal stuff to do in our lifes...
You' ve been lucky you don't bricked your device using dload method
on your nougat/android 7 rom version.
This is allowed only to downgrade to a precedent android version (in your case android 6/Marshmallow...)
Even it says your bootloader is unlocked, it isn't, so backup your stuff and unlock it again.
Once unlocked, factory reset will start. When finished do wipe cache too...
Booting into the system will now show yellow (not red) lines and after a bit will automatically boot.
Will take some minutes... ( prepare a coffee )
Set up your phone and look forward for updates...
If all will take right direction, new update will completely lock the bootloader
and at the reboot no yellow or red lines will appears. :fingers-crossed:
Voilà, complete stock with latest firmware.
Take your coffee and enjoy :laugh:
Best regards
P.S.: Remove or obscure the screenshot with imei codes ( it's sensitive datas )
Click to expand...
Click to collapse
Hi there
Hey didn't know about the IMEI codes, already deleted the picture.
I did as you said and my phone is fully stock now (no red or yellow letters) and the ads are back ,anyway thank you so much for your patience and time for helping me out.
I really appreciated your help, take care and see you around. :victory:

fr4nk32 said:
Hi there
Hey didn't know about the IMEI codes, already deleted the picture.
I did as you said and my phone is fully stock now (no red or yellow letters) and the ads are back ,anyway thank you so much for your patience and time for helping me out.
I really appreciated your help, take care and see you around. :victory:
Click to expand...
Click to collapse
Ok i'm glad to see that worked..
I wish to thank in a special way Firmware Finder TEAM that with their
programs gave us the chance to solve many problems, THX guys. :good:
See you

Huawei P9 lite not starting

Hi, this is my first post here so Hello everyone!
I tried to root P9 lite using below steps:
1. Get unlock code from DC-unlocker.
2. "fastboot oem unlock XXXXXXX..."
3. Phone was reset to factory default sow raw Android 7 was installed.
4. "fastboot boot twrp-3.1.1-0-eva.img" was not working (unknown or forbidden command, don't remember exact message)
5. fastboot flash recovery twrp-3.1.1-0-eva.img
6. After restart with recovery mode still Marshmallow recovery was running so I assumed flash failed.
7. I tried several time put other versions (twrp-3.0.2-0-eva and twrp-3.1.0-0-eva) but if I remember well last one was again installing twrp-3.1.1-0-eva again.
8. As that didn't helped I decided to give up and restore phone to previous state so locked bootloader using SRKToolHuawei-STABLE-V1.3-20160619
9. System restarted and restored to factory default and after running I saw message informing that password is needed to unlock mass storage (or mass memory). There was no onscreen keyboard so no possibility to type anything.
10. Restarted in recovery mode (volume up + power) and tried to recover system from Marshmallow recovery option (using WiFi) but it didn't helped.
11. During next restart I accidentally hold both volume up, down with power so phone tried probably to install system from SSD, but as there was no UPDATE.APP it just stopped at 5%. I left it as it is and after some time (around 5min) phone restarted.
12. Now after restart I see only info that "Your device is booting now...". All key combinations are causing phone restart and same message.
Please advise if there is anything what I can do now.
Will appreciate any help.

After discharging the battery phone started responding properly.
With connected USB cable, volume down and power buttons fastboot&rescue mode is working.
Phone unlocked
FRP unlocked
There is still EMUI recovery in place.
So looks like recovery partition was not replaced and bootloader was not locked again.
I can't tell what is in bootloader now.
System is cleared and can't reinstall it using Marshmallow recovery as it is probably end of maintenance.
My goal is to recover system now and I don't want to root it anymore.
How should I proceed?

JimiLincoln said:
After discharging the battery phone started responding properly.
With connected USB cable, volume down and power buttons fastboot&rescue mode is working.
Phone unlocked
FRP unlocked
There is still EMUI recovery in place.
So looks like recovery partition was not replaced and bootloader was not locked again.
I can't tell what is in bootloader now.
System is cleared and can't reinstall it using Marshmallow recovery as it is probably end of maintenance.
My goal is to recover system now and I don't want to root it anymore.
How should I proceed?
Click to expand...
Click to collapse
Hello,
it seemed that android 7 was your latest working OS.
Can you confirm it ?
If yes what was you complete firmware ?
(example: VNS-L31C432B418/VNS-L21C185B392, etc...)
note: 'EVA' stuff is for P9 variant, not P9 lite..
that's why you f***ed your phone...

Thank you Dadditz for your reply.
Dadditz said:
Hello,
it seemed that android 7 was your latest working OS.
Can you confirm it ?
If yes what was you complete firmware ?
(example: VNS-L31C432B418/VNS-L21C185B392, etc...)
Click to expand...
Click to collapse
It was 7 installed there for sure. And this is VNZ-L21.
Probably latest possible firmware version but can't be sure about this.
Can it be somehow checked now (guess not but not losing hope )?
Dadditz said:
Hello,
note: 'EVA' stuff is for P9 variant, not P9 lite..
that's why you f***ed your phone...
Click to expand...
Click to collapse
I took TWRP from here: twrp.me/huawei/huaweip9.html
When I look at devices list there is not P9 lite here: twrp.me/Devices/Huawei/
Which one should I use then?
P.S. sorry for no links or pictures but as new here I can't add them for now.
EDIT: I found TWRP in SRKToolHuawei-STABLE-V1.3-20160619\recovery\p9\p9.zip\twrpp9mm.img.
Guess I should load this one.
What do you think?

JimiLincoln said:
Thank you Dadditz for your reply.
It was 7 installed there for sure. And this is VNZ-L21.
Probably latest possible firmware version but can't be sure about this.
Can it be somehow checked now (guess not but not losing hope )?
I took TWRP from here: twrp.me/huawei/huaweip9.html
When I look at devices list there is not P9 lite here: twrp.me/Devices/Huawei/
Which one should I use then?
P.S. sorry for no links or pictures but as new here I can't add them for now.
EDIT: I found TWRP in SRKToolHuawei-STABLE-V1.3-20160619\recovery\p9\p9.zip\twrpp9mm.img.
Guess I should load this one.
What do you think?
Click to expand...
Click to collapse
I don't think firmware can be checked now...
Firmware may depend on where you live...
If you live in Europe it can be a branded one
(ex. vodafone: VNS-L21C02B345/6) or unbranded one(VNS-L21C432B505/6).
You cannot flash one of them if you have the other one.
You have to flash an OEMinfo file...
Anyhow you may try a factory reset first and let's hope it will restore the device.
Boot your phone with vol+and power till the e-recovery appear,
do the reset and report back how it went.
P.S.: P9 lite doesn't have an OFFICIAL TWRP.
Available unofficial versions can be founded searching into P9 lite XDA threads.
P.S.2 : A LITTLE SARCASM...
When you tinker with the phone you're not cooking
a plate of spaghetti with tomato sauce.
As you can see bricks are beyond the corner... and not always they can be solved...
Generally it is always better to ask before do, specially
if you don't know what you're doing ... but ... yes,
phone is yours and you can do anything you want...

Dadditz said:
Firmware may depend on where you live...
If you live in Europe it can be a branded one
(ex. vodafone: VNS-L21C02B345/6) or unbranded one(VNS-L21C432B505/6).
You cannot flash one of them if you have the other one.
You have to flash an OEMinfo file...
Click to expand...
Click to collapse
VNS-L21C22B383
Dadditz said:
Anyhow you may try a factory reset first and let's hope it will restore the device.
Click to expand...
Click to collapse
I don't have such option in Huawei eRecovery, only 3 below:
Download latest version and recovery
Reboot
Shutdown
When I used first option and connected trough WiFi I got error "Getting package info failed".
I tried that several times previous days but today this phone again surprised me.
After over 24 hours with discharged battery it became even more responsive (or maybe I just treated it different today).
Today I tried Huawei eRecovery again, it tried to download latest version trough WiFi and "Getting package info failed".
After restart I saw recovery wizard.
Went trough it and I got 7.0 working.
There was no screen keyboard but after recovering backup from HiSuite keyboard is was installed.
I'm also missing some other default android applications like file explorer, mirror, voice recorder, calc.
I'm wondering if it wasn't corrupted during my activities (eg "fastboot flash recovery twrp-3.1.1-0-eva.img").
Dadditz said:
P.S.: P9 lite doesn't have an OFFICIAL TWRP.
Available unofficial versions can be founded searching into P9 lite XDA threads.
Click to expand...
Click to collapse
When I mentioned about SRKToolHuawei-STABLE-V1.3-20160619.zip in my previous post it was one from:
forum.xda-developers.com/huawei-p9lite/how-to/guide-unlock-bootloader-twrp-root-t3405701
Would you recommend it?
Dadditz said:
P.S.2 : A LITTLE SARCASM...
When you tinker with the phone you're not cooking
a plate of spaghetti with tomato sauce.
As you can see bricks are beyond the corner... and not always they can be solved...
Generally it is always better to ask before do, specially
if you don't know what you're doing ... but ... yes,
phone is yours and you can do anything you want...
Click to expand...
Click to collapse
I fully agree with you.
I was searching for many instruction how to do it properly and my mistake was that I stopped fallowing them at point where I tried to installed manually TWRP.
My general conclusion is that even if system was recovered I'm not sure if everything will be ok.
I was totally surprised how my phone reacted during last days so still everything may happen.
I see also some corruption in restored system as some apps are missing.
Any advise how this could be cleaned?
Maybe I should install this system again from some trusted package like from below topic?
forum.xda-developers.com/huawei-p9lite/development/huawei-p9-lite-firmware-compilations-t3517124
What about unlocked bootloader? Should I leave it with annoying screen during phone startup or lock again?

JimiLincoln said:
VNS-L21C22B383
Click to expand...
Click to collapse
This is a good new !!
JimiLincoln said:
I don't have such option in Huawei eRecovery, only 3 below:
Download latest version and recovery
Reboot
Shutdown
When I used first option and connected trough WiFi I got error "Getting package info failed".
I tried that several times previous days but today this phone again surprised me.
After over 24 hours with discharged battery it became even more responsive (or maybe I just treated it different today).
Today I tried Huawei eRecovery again, it tried to download latest version trough WiFi and "Getting package info failed".
After restart I saw recovery wizard.
Went trough it and I got 7.0 working.
There was no screen keyboard but after recovering backup from HiSuite keyboard is was installed.
Click to expand...
Click to collapse
Also a good new !!
JimiLincoln said:
I'm also missing some other default android applications like file explorer, mirror, voice recorder, calc.
I'm wondering if it wasn't corrupted during my activities (eg "fastboot flash recovery twrp-3.1.1-0-eva.img").
Click to expand...
Click to collapse
Yes, surely.
JimiLincoln said:
When I mentioned about SRKToolHuawei-STABLE-V1.3-20160619.zip in my previous post it was one from:
forum.xda-developers.com/huawei-p9lite/how-to/guide-unlock-bootloader-twrp-root-t3405701
Would you recommend it?
Click to expand...
Click to collapse
No, this recovery isn't for nougat (android 7) version.
If you want, you can flash the one you find into HassanMirza01 TWRP thread.
Do not use 3.2.1, instead choose the 3.1.1-1 version, it's the most stable one.
JimiLincoln said:
I fully agree with you.
I was searching for many instruction how to do it properly and my mistake was that I stopped fallowing them at point where I tried to installed manually TWRP.
Click to expand...
Click to collapse
I agree too, it happen when process aren't properly followed...
JimiLincoln said:
My general conclusion is that even if system was recovered I'm not sure if everything will be ok.
I was totally surprised how my phone reacted during last days so still everything may happen.
I see also some corruption in restored system as some apps are missing.
Any advise how this could be cleaned?
Maybe I should install this system again from some trusted package like from below topic?
forum.xda-developers.com/huawei-p9lite/development/huawei-p9-lite-firmware-compilations-t3517124
What about unlocked bootloader? Should I leave it with annoying screen during phone startup or lock again?
Click to expand...
Click to collapse
Dude,
system can be fully recovered, especially now you're sure about
your latest firmware...
There was a thread with a list of stock apps, but it's been closed
because links are dead...
First thing, eliminate all safeties (fingerprints/pattern/pin)(you can add at the end of process)
You should try to reinstall your current firmware using Firmware Finder app,
download it from the big G store. Use dns/vpn method
and choose VNS-L21C22B383 FULLOTA-MF.
Also all info are inside the app. Using this method
the bootloader will be relocked.
If you wont succeed then i can tell you how to use twrp recovery
providing your stock full firmware.
Cheers

Dadditz said:
No, this recovery isn't for nougat (android 7) version.
If you want, you can flash the one you find into HassanMirza01 TWRP thread.
Do not use 3.2.1, instead choose the 3.1.1-1 version, it's the most stable one.
Click to expand...
Click to collapse
Thanks for that info. I will try it in a while when my wife will have new phone.
Dadditz said:
First thing, eliminate all safeties (fingerprints/pattern/pin)(you can add at the end of process)
Click to expand...
Click to collapse
Done
Dadditz said:
You should try to reinstall your current firmware using Firmware Finder app,
download it from the big G store. Use dns/vpn method
and choose VNS-L21C22B383 FULLOTA-MF.
Also all info are inside the app. Using this method
Click to expand...
Click to collapse
I fallowed instructions and choose first VNS-L21C22B383 FULLOTA-MF from the top (each version appear 2 times on this list).
Tried downloading trough DNS but got below message.
"Due to changes in the data exchange protocol between the Huawei server and the device, this function stopped its correct operation, but still works on older software that allows you to upgrade to one of the latest software if it has not already been done."
I tried with all FullOTA-MF versions on the list and same situation for all.
Because no other option I choose Download from last section (Other) and now I have 3 files on my phone:
update.zip
public/update_data_full_public.zip
VNS-L21_polkomtel_pl/update_full_VNS-L21_polkomtel_pl.zip
Should I install them manually?
If yes then how?
Vol+Vol-Power with those files on SD card or by TWRP?
Dadditz said:
the bootloader will be relocked.
If you wont succeed then i can tell you how to use twrp recovery
providing your stock full firmware.
Cheers
Click to expand...
Click to collapse
Many thanks for your help so far! Really appreciate that.

JimiLincoln said:
I fallowed instructions and choose first VNS-L21C22B383 FULLOTA-MF from the top
(each version appear 2 times on this list).
Tried downloading trough DNS but got below message.
"Due to changes in the data exchange protocol between the Huawei server and the device, this function stopped its correct operation, but still works on older software that allows you to upgrade to one of the latest software if it has not already been done."
I tried with all FullOTA-MF versions on the list and same situation for all.
Because no other option I choose Download from last section (Other) and now I have 3 files on my phone:
update.zip
public/update_data_full_public.zip
VNS-L21_polkomtel_pl/update_full_VNS-L21_polkomtel_pl.zip
Should I install them manually?
If yes then how?
Vol+Vol-Power with those files on SD card or by TWRP?
Many thanks for your help so far! Really appreciate that.
Click to expand...
Click to collapse
Dude, sorry if i wrote this.
I'm pretty sure you done everything correct,
but before attempt using the TWRP it's better if you
try again using Firmware Finder this way...
1 - connect to the internet, open the app, accept the disclaimer;
2 - add your complete firmware (add model) - VNS-L21C22B383;
3 - tap on your firmware;
4 - select the one with fullota-mf;
5 - tap check firmware access;
6 - tap check availability, accept disclaimer;
7 - you should have an 'availability of firmware' popup, tap ok;
8 - go back and tap 'get update through dns';
9 - a popup 'alert' you already faced will apper, tap ok;
10 - a new popup 'select dns method' will appear, tap 'auto',
then tap run vpn service and 'accept' the new connection request popup;
11 - you should now have the running vpn service in the notification panel...;
12 - minimize Firmware Finder;
13 - open settings > tap system updater,
you should find the VNS-L21C22B383 update (check multiple times);
14 - tap on it do download and apply the update;
15 - when the download reach 5%, stop the vpn service and continue doing the process...
It's something like THIS VIDEO.
Let me know...

Hi, your directions as well as movie you provided is giving much more details than application itself.
(In below description I had to use links without https as still I don't have enough posts to make them working.)
Dadditz said:
1 - connect to the internet, open the app, accept the disclaimer;
2 - add your complete firmware (add model) - VNS-L21C22B383;
3 - tap on your firmware;
4 - select the one with fullota-mf
5 - tap check firmware access;
6 - tap check availability, accept disclaimer;
7 - you should have an 'availability of firmware' popup, tap ok;
8 - go back and tap 'get update through dns';
9 - a popup 'alert' you already faced will apper, tap ok;
10 - a new popup 'select dns method' will appear, tap 'auto',
then tap run vpn service and 'accept' the new connection request popup;
11 - you should now have the running vpn service in the notification panel...;
12 - minimize Firmware Finder;
Click to expand...
Click to collapse
Done
Dadditz said:
13 - open settings > tap system updater,
you should find the VNS-L21C22B383 update (check multiple times);
Click to expand...
Click to collapse
No such option in my Phone. It looks like this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ibb.co/Zf4k0fX
when it should look like this
ibb.co/C0NfpJd
I found it using search menu
ibb.co/SDSYdjR
but when I tap it nothing is happening
Dadditz said:
14 - tap on it do download and apply the update;
15 - when the download reach 5%, stop the vpn service and continue doing the process...
It's something like THIS VIDEO.
Let me know...
Click to expand...
Click to collapse
I wish I could do that

JimiLincoln said:
Hi, your directions as well as movie you provided is giving much more details than application itself.
(In below description I had to use links without https as still I don't have enough posts to make them working.)
Done
No such option in my firmware finder
ibb.co/DYkBGVH
ibb.co/rsNTvdb
so i tried to proceed without checking.
Done
No such option in my Phone. It looks like this
ibb.co/Zf4k0fX
when it should look like this
ibb.co/C0NfpJd
I found it using search menu
ibb.co/SDSYdjR
but when I tap it nothing is happening
I wish I could do that :
Click to expand...
Click to collapse
Thank you for all your feedbacks dude.
Yep, it's clear the firmware is completely f***ed...
Tomorrow i will tell you how to use TWRP
and completely restore the device.

@JimiLincoln
You can restore the exact same rom you had on your smartphone ...
(I'm not sure, it seems it's a sort of firmware branded by vodafone)
but if I can afford, if it were you
i would install the European non-brand version (C432),
without bloatware and should also have the most updated security patch.
Is the phone single or dual sim?
Also, let me know if you want to have all stocks or
have the bootloader unlocked for future manipulations ...

Hello @Dadditz,
Dadditz said:
You can restore the exact same rom you had on your smartphone ...
(I'm not sure, it seems it's a sort of firmware branded by vodafone)
Click to expand...
Click to collapse
It is branded by Polkomtel (plus.pl).
Dadditz said:
but if I can afford, if it were you
i would install the European non-brand version (C432),
Click to expand...
Click to collapse
European non-brand version would be the best.
Dadditz said:
Is the phone single or dual sim?
Click to expand...
Click to collapse
Dual (hybrid)
Dadditz said:
Also, let me know if you want to have all stocks or
have the bootloader unlocked for future manipulations ...
Click to expand...
Click to collapse
I have bootloader unlocked and if future modifications will not erase phone data then we could start with minimal version.
Thanks

JimiLincoln said:
Hello @Dadditz,
It is branded by Polkomtel (plus.pl).
European non-brand version would be the best.
Dual (hybrid)
I have bootloader unlocked and if future modifications will not erase phone data then we could start with minimal version.
Thanks
Click to expand...
Click to collapse
You must use a twrp to rebrand your phone.
Download and flash the one i suggested you (3.1.1-1 by HassanMirza01)
When you done, come back for the files and the guide...

TWRP 3.1.1-1 For P9 Lite by HassanMirza01 installed.
I can enter it only by holding Power + Vol Up without USB connected.
When I hold Power + Vol Up with USB connected Huawei eRecovery is launched.
Is it normal?

JimiLincoln said:
TWRP 3.1.1-1 For P9 Lite by HassanMirza01 installed.
I can enter it only by holding Power + Vol Up without USB connected.
When I hold Power + Vol Up with USB connected Huawei eRecovery is launched.
Is it normal?
Click to expand...
Click to collapse
Yes, normal, you have both
stock and custom recovery now...
Ok, i will post a list of file you have to download:
1 - HuRUpdater04.zip file (will do the job);
2 - L21C432OEMinfo.zip file (dual sim);
THE FIRMWARE:
3 - update.zip ;
4 - update_data_full_public.zip ;
5 - update_full_VNS-L21_hw_eu.zip ;
Let file 3 the same name, rename file 4 from
update_data_full_public TO update_data_public,
rename file 5 from update_full_VNS-L21_hw_eu TO update_all_hw.
Names must mandatory match the ones I wrote to you, otherwise it won't work.
This is the procedure:
Use your PC, make a folder and rename it L21C432B506.
Copy files 3-4-5 (renamed) and HuRUpdater04.zip file into that folder.
(if you want you can keep the TWRP copying the .img file into that folder too).
Copy the folder into the SD.
Copy the OEMinfo file wherever you want into the SD.
Put the SD into the device...
Reboot into recovery and format DATA
(wipe>advanced wipe>tick data and tap format in the bottom right> type 'yes').
Reboot again recovery and wipe everything except SD
(wipe>advanced wipe>tick everything except sd).
Go in main menu, tap install, find and select OEMinfo file, let it flash...
When finished go in main menu and select REBOOT then Bootloader.
Once booted, connect the phone to your PC and
unlock again the bootloader. (quickly disconnect it from PC)
Device should automatically reboot into the recovery otherwise you can do
holding vol + and power button.
Now tap install, find your L21C432B506 folder,
select (only) HuRUpdater04.zip file and let it flash...
Your device should reboot into the system correctly,
if not (if passes over 15 mins) reboot into the e-recovery and
do a factory reset + wipe cache.
Done !!

Hello Dadditz,
Everything installed and working fine
Only bothering thing is message that device was unlocked and can't be trusted.
I will keep this for now as it may be useful at some point.
Many thanks Dadditz for your great help!!!
I will probably come back to this topic when my wife will have new phone, so I will play more with this P9 lite, customize system and learn more.

JimiLincoln said:
Hello Dadditz,
Everything installed and working fine
Only bothering thing is message that device was unlocked and can't be trusted.
I will keep this for now as it may be useful at some point.
Many thanks Dadditz for your great help!!!
I will probably come back to this topic when my wife will have new phone, so I will play more with this P9 lite, customize system and learn more.
Click to expand...
Click to collapse
Amazing polite guy,
i was very pleased to be able to help you, obviously, for what I know ...
It's not a big deal to have that 'annoying' message at boot.
Re-lock the bootloader is the only way to remove it.
You have more than one method:
Flash a previous version of your current firmware
and use Firmware Finder to update to the latest;
or wait untill a new version of your current firmware comes out
and use Firmware Finder to update to;
or use fastboot commands but it's seriously risky;
Keep it as is..
Cheers dude. :highfive:

help
i have a similar problem BUT i can't restart my p9 lite in recovery mode. I tried vol+ & power; vol - & power; vol +, vol - & pwer; only power. The result is always the same: "your device as been unlocked and can't be trusted....... Your device is booting now....". I try also to wait to descharge battery. After descharging, when i connect usb cable to recharge, the smartphone wake on with the same message..... Someone can help me?

Dadditz said:
Amazing polite guy,
i was very pleased to be able to help you, obviously, for what I know ...
It's not a big deal to have that 'annoying' message at boot.
Re-lock the bootloader is the only way to remove it.
You have more than one method:
Flash a previous version of your current firmware
and use Firmware Finder to update to the latest;
or wait untill a new version of your current firmware comes out
and use Firmware Finder to update to;
or use fastboot commands but it's seriously risky;
Keep it as is..
Cheers dude. :highfive:
Click to expand...
Click to collapse
Hello Dadditz,
thank you for your warm words.
I can only comment that still being polite is much easier than spending your private time on helping stranger
Also thanks for warning about locking bootloader by fastboot.