Please help!
My friend's d802 G2 is stuck in recovery, it wont go into download mode either.
he has stockrom installed and was prompted to install an update which MAY have been an official LG update.
The phone now is stuck in TWRP recovery and he can't boot. he has cynogenmod and stockrom .zip's on his SD Card but installing them and rebooting still doesn't work (with or without wipe).
Is there something he can do to fix the phone? perhaps using ADB from recovery?
Any help much appreciated
May have found the solution in http://forum.xda-developers.com/showthread.php?t=2451696
Will update if so.
fixed. mods please delete or archive.
Hi everyone,
I flashed this rom using Odin.
http://forum.xda-developers.com/galaxy-s5/development/official-6-0-1-g900m-port-g900f-t3344875
however after flashing and rebooting it was stuck at the Samsung-logo, so I reflashed TWRP and restored the backup I have on my microsd-card (CM13). However, when rebooting, the backup (which used to work fine) is also stuck at the CM13 boot-animation.
Any advice would be appreciated.
Reflash LP bootloader
i flashed nuclear 7.1 but i encurred in a bootloop that i could resolve only with qfil tool, so i putted cos 12.1 stock, unclocked bootloader and flashed twrp, now: when i flash ANY rom via twrp i go in a bootloop that i can only solve with qfil tool going back to cos and do everything from beginning.
i tried:
change recovery (i tried CWM but i have same problem)
wipe storage (anything changed)
i tried several roms but everyone gave me the same result: very fast bootloop in zuk logo and phone vibration
the only thing i can do is to restore a backup, but since im note able to flash mm firmware (bootloop) i cant use touch id and g-sensor
what can be the problem?
any solution?
thanks
Boot and recovery partitions
Sounds like you messed up boot and recovery sections. Since you can boot up successfully, you may try to flash back to ZUI which changes these two sections completely. If it's not a solution for you, I think the only way to repair is completely format including kernel, system and partitions. You can find the tutorial on Website.
...
you can fix it just use TOOL_ZUK_Z1_ENG_0.0.6
Try flashing COS 12.1 via fastboot.
crazyox said:
i flashed nuclear 7.1 but i encurred in a bootloop that i could resolve only with qfil tool, so i putted cos 12.1 stock, unclocked bootloader and flashed twrp, now: when i flash ANY rom via twrp i go in a bootloop that i can only solve with qfil tool going back to cos and do everything from beginning.
i tried:
change recovery (i tried CWM but i have same problem)
wipe storage (anything changed)
i tried several roms but everyone gave me the same result: very fast bootloop in zuk logo and phone vibration
the only thing i can do is to restore a backup, but since im note able to flash mm firmware (bootloop) i cant use touch id and g-sensor
what can be the problem?
any solution?
thanks
Click to expand...
Click to collapse
Hi!! I've flashed the NucleaRom too and for a couple of weeks it worked just fine. However one day, out of nowhere, the phone, while still on and working, restarted itself and entered a bootloop. After a few days it restarted normally and lasted a couple of hours but then it all started again. The BIG issue here is that when the phone enters in this bootloop where it remains on for about 15 seconds, it does it either in the system or the recovery/fastboot. I've managed to install two other ROMs via TWRP, when it miraculously remained turned on, but the problem persisted.
Is there a chance your problem was similar? How did you manage to flash via QFIL? I can't enter into that "emergency" or "download mode" in order to flash.
Many thanks in advance
i think that the problem is in the bootloader itself you should try flashing the latest os u have used and instal ordinary unofical lineage nightly (you can find everywhere) by this way your bootloader will be updated to 7.1 after that you can install any software i was having same problem when trying to migrate to lineage os
unable to install Custom ROM's
hi ,,
even i had the same problem like recovery was not accepting any ROMS... if we flash it ll go to recovery again and again,
and later i have flashed CM 13 with image file,, it worked and gone to recovery and updated the update to lineage OS 14.1 with Gapps..
hope it might help u...
crazyox said:
i flashed nuclear 7.1 but i encurred in a bootloop that i could resolve only with qfil tool, so i putted cos 12.1 stock, unclocked bootloader and flashed twrp, now: when i flash ANY rom via twrp i go in a bootloop that i can only solve with qfil tool going back to cos and do everything from beginning.
i tried:
change recovery (i tried CWM but i have same problem)
wipe storage (anything changed)
i tried several roms but everyone gave me the same result: very fast bootloop in zuk logo and phone vibration
the only thing i can do is to restore a backup, but since im note able to flash mm firmware (bootloop) i cant use touch id and g-sensor
what can be the problem?
any solution?
thanks
Click to expand...
Click to collapse
crazyox said:
i flashed nuclear 7.1 but i encurred in a bootloop that i could resolve only with qfil tool, so i putted cos 12.1 stock, unclocked bootloader and flashed twrp, now: when i flash ANY rom via twrp i go in a bootloop that i can only solve with qfil tool going back to cos and do everything from beginning.
i tried:
change recovery (i tried CWM but i have same problem)
wipe storage (anything changed)
i tried several roms but everyone gave me the same result: very fast bootloop in zuk logo and phone vibration
the only thing i can do is to restore a backup, but since im note able to flash mm firmware (bootloop) i cant use touch id and g-sensor
what can be the problem?
any solution?
thanks
Click to expand...
Click to collapse
i am continuously on the boot loop! how to get rid of it?
plz help its been 4 hrs, i think i am in trouble! any possible solutions!!!!
U can try one thing.... Install cm13 with flash file and then restart - - & go to recovery select install update and select lineage 14 and G apps... I did like this . And it worked....
I have a problem about backup my rom by TWRP 3.0.2.1.
So i try to flash TWRP 2.8.7.0-i9500 and make a backup, it didn't work.
So i flash again TWRP 3.0.2.1 and take a backup, didn't work. I restart to my phone and stuck in bootloop.
I try to re flash my rom again and it still stuck in bootloop now.
Please, any one help me.
What should i do ?
It did restart and go to bootloop again (
I still can go to TWRP and i am reflashing the rom again. Hope it will work.
EDIT: it worked
Read earlier that newer version was not loki'ed so if the bootloader was locked it might complain? Try 2.8.7.0
While installing custom roms I'm getting this issue of twrp stuck at "patching system
While installing custom roms I'm getting this issue of twrp stuck at "patching system image unconditionally"and tried flashing latest twrp latest roms as well as fastboot flashing stock cm 12.1 and then rooting it again but still the issue remains ..
If someone have a fix for this pls guide me ...or if already solved and I had missed it in this forum pls give the link in here .....
Thanks in advance.....