My galaxy S4 GT-I9500 stuck in bootloop after flash newer version TWRP - Galaxy S 4 Q&A, Help & Troubleshooting

I have a problem about backup my rom by TWRP 3.0.2.1.
So i try to flash TWRP 2.8.7.0-i9500 and make a backup, it didn't work.
So i flash again TWRP 3.0.2.1 and take a backup, didn't work. I restart to my phone and stuck in bootloop.
I try to re flash my rom again and it still stuck in bootloop now.
Please, any one help me.
What should i do ?

It did restart and go to bootloop again (

I still can go to TWRP and i am reflashing the rom again. Hope it will work.
EDIT: it worked

Read earlier that newer version was not loki'ed so if the bootloader was locked it might complain? Try 2.8.7.0

Related

TWRP and Philz Recovery don't work

I tried TWRP and it's fine other than it doesn't flash any ROMs that I've tried.
Decided that I should try Philz Recovery ery and that booted fine the first time, tried to do a backup but gave me an error and told me to reboot. It wouldn't boot back into the recovery.
Should I flash stock firmware and try again? Or is there a problem with the phone?
Thanks
undeniableturnip said:
I tried TWRP and it's fine other than it doesn't flash any ROMs that I've tried.
Decided that I should try Philz Recovery ery and that booted fine the first time, tried to do a backup but gave me an error and told me to reboot. It wouldn't boot back into the recovery.
Should I flash stock firmware and try again? Or is there a problem with the phone?
Thanks
Click to expand...
Click to collapse
Just check the root status if that's ok Or re root
Else flash stock rom reset the device root using Cf root and flash philz recovery all should be ok
.

[Q] unable to boot recovery after failed multiboot.

hello community
After flashing pacman rom
(http://forum.xda-developers.com/showthread.php?t=2400387)
,on a clean wiped device, i accidentaly set it to second boot in this multiboot solution
http://forum.xda-developers.com/showthread.php?t=2447534
using the recovery multiboot utility.
Now i am stuck in the boot animation and cant access recovery (blackscreen and restart).
But i am still able to access boot mode. I tried to flash a different recovery using odin3.07
http://forum.xda-developers.com/showthread.php?t=2397108
http://forum.xda-developers.com/showthread.php?t=2397108
Now I am not shure what to do, maybe odin flashing an official samsung rom?
Thank you for your help
update 03.03:
I odin flashed stock, according to this guide
http://forum.xda-developers.com/showthread.php?t=2265477
After that I odin flashed twrp and restored the efs partition from an nandroid backup.
everything working fine.
I´m out
Samsung GT-I9505 jfltxx (bought from amazon in germany)
bootloader:the one that cam with the frst offiacial kitkat release
pacman rom(alpha)
http://forum.xda-developers.com/showthread.php?t=2400387

[Q] Custom Recovery Doesn't Work Anymore

Hello,
I've rooted my own note 3 and flashed Temaseks unofficial cm 12 rom. Everything works perfect so I decided to do the same thing for my father. It all went well, first I rooted his phone, then I flashed CWM and flashed cm 12 by temasek. The rom works fine but I forget to install the Gapps. So I tried to install Gapps but I got an error "Failure Status 6". I googled on that error and someone told it has to do something with CWM. I tried to flash a different version of CWM but now I can't reboot into recovery mode anymore. So I can't flash anything.
I flashed another version of CWM but this one also doesn't work. Whenever I try to boot the phone into recovery mode, the blue line shows up. Rebooting into recovery mode, but after a few secs, the phone just boots the normal way. Is there anyone that can help me to get CWM back to work? In the mean time I'll try to flash TWRP by Odin.
Thanks in advance!
So I flashed latest version of CWM: Buildversion; 6.13.0, CWM Base Version V6.0.4.7. I can reboot into recovery now but still can't install Google Apps due to failure status 6. On my own Phone I run a different version of CWM, but when I try to flash it, the phone won't boot into recovery mode anymore. It only boots into recovery when I flash this V6.0.4.7 . How can I get rid of this version and flash an older version of CWM?
You'll probably have to Odin back to stock and start over...
Morningstar said:
You'll probably have to Odin back to stock and start over...
Click to expand...
Click to collapse
You mean If there is no other way to get the Google Apps on the phone, I have to go back to stock. I did make a backup with CWM on the while it was running custom firmware. Now I have 4 files on my comuter, 3.tar and 1.md5 . If I recover them, I will still have this not working CWM version on my phone right? Isn't there a easier way to delete CWM, can I flash TWRP over CWM and see if it will install these Gapps?
Yeah, you should be able to flash TWRP over it. TWRP is much better anyway, in my opinion. Once you get the recovery issue sorted, I really wouldn't't recommend trying to flash just the gapps. It would probably work, but it's also quite likely to cause some weird issues. It's always best to flash gapps immediately after flashing a ROM, without leaving recovery.
I would flash TWRP, wipe everything but your internal SD, re-flash the ROM, flash the gapps, and everything should be cherry.
Edit: here is the link to download TWRP.
Morningstar said:
Yeah, you should be able to flash TWRP over it. TWRP is much better anyway, in my opinion. Once you get the recovery issue sorted, I really wouldn't't recommend trying to flash just the gapps. It would probably work, but it's also quite likely to cause some weird issues. It's always best to flash gapps immediately after flashing a ROM, without leaving recovery.
I would flash TWRP, wipe everything but your internal SD, re-flash the ROM, flash the gapps, and everything should be cherry.
Edit: here is the link to download TWRP.
Click to expand...
Click to collapse
I appreciate your effort, thank you. The recovery issue is solved. I flashed Chainfires Root script and that installed the stock recovery. However, when I tried to install and older CWM version I got back in the recovery reboot cycle. But once I installed the latest CWM it booted in recovery. So I flashed Chainfires Root once again and had the stock recovery back. From there on I tried to install TWRP but got the recovery boot cycle again. My phone is now running android 5.0.2 and I think that's the problem.... :S I'll try again to flash Chainfires Root script to get the stock recovery back. From there on I will try to flash the link you gave to me with Odin and hope that will fix it. Do you have any ideas on what I'm doing wrong?
Your version of TWRP works so far. It reboots into RecoveryMode. Now I'll wipe and try to install Temaseks Cm 12 followed by Gapps! Thanks so far!
Okay, it's solved. Can't thank you enough for you help. Bless you!!
No problem. Glad you got it figured out!
[emoji106]

Phone won't boot after flashing the SuperSU - SOLVED

Hi!
EDIT: Never mind, problem solved. Sorry.
I have finally decided to root my G900F (6.0.1). I flashed TWRP through Odin without problems, booted to TWRP to make it permanent, booted normally to check that all is well. After that I made a full backup in TWRP and flashed the BETA-SuperSU-v2.49.zip. After that, my phone no longer boots (hangs on the Galaxy S5 screen with a blue indicator LED).
I can still boot to TWRP.
How can I fix my phone? Please help. What did I do wrong?
I did try wiping the cache partition but nothing else.
Hopefully the solution does not require a full wipe.
EDIT: I see what I did wrong. I have accidentally flashed an old SuperSU.
Can I use a backup I made with a TWRP?
EDIT2: Luckily the restore did work! Will try to flash a more recent SuperSU.
flash it again but with latest version of supersu. It will work
Spawnknight said:
flash it again but with latest version of supersu. It will work
Click to expand...
Click to collapse
Yup, it did work beautifully. Lucky for me that I remembered to make a backup before rooting.

TWRP problem on SM-A500FU

Hello. I have a problem installing newer version of TWRP. Have now 3.0.0.0 works great, but when trying to flash newer one like 3.0.0.1, 3.0.2-1 (for SM-A500FU) and etc. after flashing and when trying to boot in to recovery nothing happens just twrp logo looping, blinking. Have tried already flash to stock recovery and from stock to 3.0.2-1 (for SM-A500FU), same happens. Have tried flash stock rom, stock recovery and then flash 3.0.2-1 (for SM-A500FU), same happens. Bootloader, modem is updated, im on 6.0.1. Every time same loop and blinking with newer version of TWRP, and dont know what to do. Help please.
No answers? :/

Categories

Resources