https://www.youtube.com/watch?v=LmQ0cTMYXq8
I had a phone arrive today from a reseller and screen was like this on arrival.
Anyone know how to fix? Is it an easy fix to open the phone up and reset a cable or something?
Or I just RMA it?
Thanks.
Related
My Imate 2020 LCD dont function when I tab it, whether soft reset or soft update, there's no response when touching the screen.
What is the trouble? Can anyone please help me?
You could try a hard reset, if it still doesnt work it is probably hardware problem with digitizer.
I see people advertise new LCD's like this. LCD + touch screen, is there a difference? It is as if my screen top has become stiff. Seem like some liquid marks in screen, dont know how that happened. Can that be cause, then what must I do? Thanks for response.
mine stopped working when i pressed it too hard (got a bit enthusiastic with the cleaning), but it started working again 10 minutes later
Touch part of screen for MDA2 for sale.
If anyone wants - I have it - is the new one.
[email protected]
Re: Touch part of screen for MDA2 for sale.
bigfoot said:
If anyone wants - I have it - is the new one.
[email protected]
Click to expand...
Click to collapse
I need it...can u pls confirm the shipping and total cost to India....
found digitizer seller on ebay
i found the digitizer seller on ebay, the only problem is, is there anybody that can teach me how to replace the digitizer ? cos' the seller said that i need to solder the digitizer.
btw, this is the link of the digitizer
http://cgi.ebay.com/OEM-O2-XDA-II-M...ryZ41343QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Guys,
I have to keep my finger pressed hard against the bottom of the lcd unit to get the screen to display to work properly. It is under warranty with Imate but they want me to send it to Abu Dhabi for repair. I'm in Canada and concerned that I may not get it back.
So has anybody else seen this & identified this as being a loose connection rather that a real hard fault. Also has anybody fixed their unit by dismantling and reseating the connections.
Finally has anybody used the Imate repair service and was it timely & reliable?
Any advice would be appreciated.
Mick
Hi to all,
I have strange problem with my Elf. My screen stopped responding and I thought that the problem is the digitizer. Hard reset didn't help. I ordered a new one and changed it. Unfortunately the situation remained the same. So I got the same working phone from a friend and decided to change some parts to find out where the problem is. The result is..
My front panel(with the new and after that with the old digitizer) connected to the working phone - not responding screen.
My phone connected to the working front panel - not responding screen.
I have no idea what to do. If anyone can help. Exclude the warranty.
There is a small battery on the motherboard. Does anyone know its functions?
I have a suggestion that it is something like cmos battery of the PC.
My idea is to remove it for a while and make new hardware initialization.
I am not sure about that.
I doubt that there is something with the touch screen controller(TSC2046). Is there any way to reset it?
Hey Guys, Can anyone help ?
I plugged my phone in to charge overnight like normal and when i unplugged it next morning the screen will not respond to taps. There are no cracks or damage to the screen and it hasnt had a bump.
A hard reset gets me as far as the calibration screen but again, cant do it.
Does anyone either have any ideas or can anyone recommend a good repair place in the uk ??
thanks.
Andy
AndyG said:
Hey Guys, Can anyone help ?
I plugged my phone in to charge overnight like normal and when i unplugged it next morning the screen will not respond to taps. There are no cracks or damage to the screen and it hasnt had a bump.
A hard reset gets me as far as the calibration screen but again, cant do it.
Does anyone either have any ideas or can anyone recommend a good repair place in the uk ??
thanks.
Andy
Click to expand...
Click to collapse
Hi Andy,
If you are familiar with rom flashing you could try it before sending to repair in case it's software related.
Good luck
Arrrrrrggghhh-bloody backlight/touch bricked!
I have the same issue and it's driving me nuts!!
pressing the screen bottom left quite hard puts the backlight back on but it goes off as soon as I take my finger off.
Having done a web search, it appears that this may be a firmware issue, but if so, why, after 9 months of trouble free use, has it only just happened?
I'd be very interested if anyone else has solved this issue. Is there patch or is it a hardware issue?
My otherwise excellent touch is effectively bricked-any help or suggestions at all would be appreciated!
A fix (sort of)
I bit the bullet and ordered a replacement LCD module online and fitted it. It worked, proving that there was indeed an issue with the original. Problem is, the quality of the new one is really bad so DON'T buy a replacement online is my advice. I've now sent my beloved Touch back to HTC to get it fixed...
Hopefully I'll have it back and working soon.
FIXED !
i know this is gonna sound weird but i bought a BENQ_E72 while my touch wasnt working and i kinda forgot about the touch in the meantime. Yesterday i came back to the touch and lo and behold its working perfectly. Screen align is working, taps are going through and i cant see a problem.
Now i have read a thread about the Digitizer filling up with dust and yes my front case does have 2 hairline cracks in it so i am thinking a strip apart, new case and clean and go from there if it does it again. Odd how leaving it to discharge compleely for a couple of months has 'cured' the problem
Just thought i would share this with you
AndyG
https://www.youtube.com/watch?v=LmQ0cTMYXq8
It is a Droid Maxx 2 but since this sub-forum is far more active I thought I would post in here since it is the same phone?
I had a phone arrive today from a reseller and screen was like this on arrival.
Anyone know how to fix? Is it an easy fix to open the phone up and reset a cable or something?
Or I just RMA it?
Thanks.
Is the issue fixed?
mrw187 said:
https://www.youtube.com/watch?v=LmQ0cTMYXq8
It is a Droid Maxx 2 but since this sub-forum is far more active I thought I would post in here since it is the same phone?
I had a phone arrive today from a reseller and screen was like this on arrival.
Anyone know how to fix? Is it an easy fix to open the phone up and reset a cable or something?
Or I just RMA it?
Thanks.
Click to expand...
Click to collapse
Hi,
Were you able to fix the screen blank issue in your X Play?
My X Play has the same issue - no display, only random vibrations. Display turns on once in a while automatically, looks as if a TV signal cable is loose/disconnected.
Phone is with the dreaded lenovo service center, with no updates since last 3 days.
Thanks
Vipin