Database Users

Recovery bricked after Nougat update?

First excuse me for opening an other thread like this, i think i have read all other threats regarding my problem, but none have the same situation
My Huawei M3 Wifi (BTV-W09) seems semi bricked after installation of Nougat Update.
The Installation (Force Install with dload) gave me an error and also while boot i got the error message: "Your device has failed verification and may not work properly."
I have the option to press "Powerbutton" and the device will boot up. I checked the Version and it showed android 7 + EMUI 5. The only problem was that almost every system app was missing, like keyboard, calendar etc. (playstore was there)
So i tried to do the rollback with:
HUAWEI MediaPad M3 8 Rollback Package%28BTV-W09 %2CC900B300%2C EMUI5.0%2BAndroid7.0 rollback to EMUI4.1%2BAndroid 6.0%29
The Installtion (force update) gets stuck at 5% and after like 3-5 minutes the tablet will boot up showing the same boot error that can be skipped with pressing powerbutton. I checked sytem and it still showed "android 7 + EMUI 5" but built : BTV-W09C900B300
I think this is the one i "need" to be able to install the "HUAWEI MediaPad M3 8 Firmware %28BTV-W09 %2CC100B006%2C EMUI4.1%2BAndroid 6.0%29"
Problem is regardless which "update.app" i try to force install will get stuck at 5% and give me same error. I have ADB/Fastboot installed and tried some different things like flashing/unbricking it with "Huawei Multitool" where you can extract like boot.img or recovery.img and try to flash it.
Also getting an error. I can access eRecovery witout problems, the option to fix it by itself by wifi doesn`t work. I can´t access "normal" recovery and i think there is the problem (may got bricked while flashing Nougat?) I think its recovery problem, cause when i boot it up to the "half-installed" Android and go into setting "hard-reset" option i know it would boot up intoi recovery and would erease everything, while bootup it shows error "reset failed".
In fastbootmode i see bootloader: unlocked FRM: unlocked
I tried to install TWRP recovery with adb but get error: adb remote command not allowed
I downloaded like 15 different Android Versions 6+7 Emui 4.1+5 to try with force update but none worked, may i have to flash special version of recovery first?
I just want a normal version of android 6 or 7 i dont mind but at the moment with half working 7 "without" systemapps its a hardtime.
I hope someone can help me.
This isnt my first android device and im not a total noob i unlocked bootloader and flashed kernels on many other phones but with the W-09 where i did nothing special i dont get why "recovery got broken"
Thanks in advance

You haven't read other threads too well: more times people reported that the bootloader got locked after an update still declaring itself unlocked!
Second thing you have not found: the Nougat update consist of 2 packages and the second must be installed from TWRP.

nicolap8 said:
You haven't read other threads too well: more times people reported that the bootloader got locked after an update still declaring itself unlocked!
Second thing you have not found: the Nougat update consist of 2 packages and the second must be installed from TWRP.
Click to expand...
Click to collapse
thanks for your anwser, i read that so i also tried unlocking it "again" and it quotet it is also unlocked in adb. I also know that there are 2 packages. That you need TWRP i didnt know thanks so i am a bit smater now. I think i ll try "relock" and unlock it again might be the right way, thanks for the tip.

kivi90 said:
I think i ll try "relock" and unlock it again might be the right way, thanks for the tip.
Click to expand...
Click to collapse
This is nonsense. Unlock, install the right TWRP then install the second zip package.

nicolap8 said:
This is nonsense. Unlock, install the right TWRP then install the second zip package.
Click to expand...
Click to collapse
i cant unlock cause i dont have the code, on the huawei page i try do make an account and get the code by providing the necessary information.
I just uploaded a picture, i choose "before EMUI5" cause this is the only option i can choose "tablets". --> i choose "tablet wifi" , enter product model "BTV-W09" then the serialnumber i can see in setting: 28D6R17316XXXXXX but then i have the problem to input product id, it say i can get it through "Dialer" app (which i dont have in wifi model ) or the calculator. Problem is in my damaged installation there is no huawei calc, other calcs from store dont work (read that problem in other threats) I tried many apps from appstore to get a product ID but huawei site keeps saying wrong product ID =/
With the program DC Unlocker i am able to see a MEID i dont know if its the right one, i tried my luck with the Product ID Generator from Huawei but it doenst work. (device not supported)

It's very strange that it says bootloader unlocked if you have never unlocked...
And was very stupid to try to installl a beta release without before unlocking and taking a backup.
Exhange your device for a Nokia 3110!

nicolap8 said:
It's very strange that it says bootloader unlocked if you have never unlocked...
And was very stupid to try to installl a beta release without before unlocking and taking a backup.
Exhange your device for a Nokia 3110!
Click to expand...
Click to collapse
yeah at this device i never touched bootloader, i didnt think it would become such a big deal , i didnt want unlocked bootloader or other recovery just newest android. Never had any problems with the "force update function" to come back to stock. I tried DC Unlocker but cant get further cause device need to get into manufature mode (thorugh dialer or calculator which i both dont have) i hope maybe i find one more way.

Did you ever find a fix
Did you ever find a way to fix this. I'm in the same situation. I even did a VPN on my router to give me a Hong Kong address for erecovery and that still didn't work. I have the exact same product. Like you I tried to various attempts to download a new recovery, but nothing works. Nice hardware, but some of the worst software/firmware I have ever dealt with since starting with the first release of Android on the HTC Hero.

kivi90 said:
yeah at this device i never touched bootloader, i didnt think it would become such a big deal , i didnt want unlocked bootloader or other recovery just newest android. Never had any problems with the "force update function" to come back to stock. I tried DC Unlocker but cant get further cause device need to get into manufature mode (thorugh dialer or calculator which i both dont have) i hope maybe i find one more way.
Click to expand...
Click to collapse
I had mostly the same problem. I rolled back to 4.1 using the rollback and the actual 4.1 update.app. I think that puts you on C100 if I remember right. Tablet I have is C128 (USA) but no problem for this step. Get the Product ID from the calculator. Allow OEM unlock in the settings, then unlock it using the unlock code. Email yourself the unlock code because who knows if their website will even be functional next time. Alternatively you can extract the stock calculator from the update_data_usa.zip or whatever and try to use DC with 5.0. That second update zip does not install properly via the dload method, so a bunch of stock apps don't get installed. You can kind of hack it and flash it via TWRP but I didn't do it that way.
Or...you can use firmware finder to force an OTA from 4.1 right up to 5.0 (350), then take that last partial OTA to 351 after as well. The way to do that is via DNS in firmware finder. Find the Full OTA in firmware finder you want, send it to the updater by changing your DNS the way it tells you to, and when it does the OTA, everything will be properly installed basically the official way. Good as new. Flash TWRP to recovery2 and replace the erecovery. Keep the stock recovery as is. Install magisk. Golden.
---------- Post added at 03:36 AM ---------- Previous post was at 03:26 AM ----------
kivi90 said:
So i tried to do the rollback with:
HUAWEI MediaPad M3 8 Rollback Package%28BTV-W09 %2CC900B300%2C EMUI5.0%2BAndroid7.0 rollback to EMUI4.1%2BAndroid 6.0%29
The Installtion (force update) gets stuck at 5% and after like 3-5 minutes the tablet will boot up showing the same boot error that can be skipped with pressing powerbutton. I checked sytem and it still showed "android 7 + EMUI 5" but built : BTV-W09C900B300
I think this is the one i "need" to be able to install the "HUAWEI MediaPad M3 8 Firmware %28BTV-W09 %2CC100B006%2C EMUI4.1%2BAndroid 6.0%29"
Problem is regardless which "update.app" i try to force install will get stuck at 5% and give me same error.
Click to expand...
Click to collapse
Also, as far as the rollback, you need to do the first one (the C900 which is just a compatibility fix to allow rollback, previously used by beta testers I believe). Then you need to do the second one, the C100. If it is getting stuck, try downloading it again and be sure you don't have anything else in the /dload directory on either internal or the sd card. I had one on both at one point so maybe that happened to you. The C900 should be very quick but the C100 will slowly progress after 5% all the way around in several minutes.
When you get to updating back to 5.0, you can choose whichever region you want as long as it is a full OTA. C128 is USA and that's what I bought so that's what I picked. That gets you back in the right OTA update channel after that.

Hi guys,
I started as a novice and have learnt the hard way.
Has anyone tried rollback to EMUI 4.1 EU version on a US device (W09) and are there any problems I should be aware of?
I have had the exact same problem shared in this thread and have gone through the pain of finding a solution. My last resort is to rollback to 4.1 and restart the whole process.
@deV14nt: you suggested that when updating back to EMUI 5.0, I can choose the region even if my EMUI4.1 is EU version. How does this work?
Thanks in advance for your help.

Broke one P9 Lite with TWRP, second one available

I tried loading lineageOS onto my P9 lite without making a backup, needless to say after the wipe/format the installation failed and I cannot get my P9 lite to boot, tried update file in dload folder, tried other roms which install but doesnt boot up, basically all I feel like doing now is be in a fetus position and cry...
Feels like i've read all guides/posts out there but all seem to get it right.
Getting lineage to work will be best, getting the phone to start with orignal or any software will be great!
My wife has a p9 lite, any way to do a backup of her phone I can use to restore my phone? obviously given my track record she doesnt want me to scratch around too much or unlock anything
My device details : VNS-L31C185B380
:crying::crying::crying:

Killed P9 Lite instead of getting back to live, maybe there is a last chance?

Hello, short Story before. I got a full Hand of non working mobile phones because being full of a hell of viruses.
5pcs. younger ones.
2 Huaweis and 3 Samsungs.
Well so far 4 PCs. are saved.
Getting into the phone wasn´t possible anymore. Data not important so I resettet over the Buttons to original Status. -> Worked fine.
But one Piece which is a Huawei P9 Lite guess it is a single sim? was the button method not possible cause it wanted a Software update and Installation of WLAN failed (EMUI)
Getting into the phone for any informations was also not possible because of all the viruses and not working right ahead anymore.
Well ok -> will use High Suite for stock Firmware -> this mobile phone is not supported and also couldn´t activate MTP as I am not in the phone. So far.
Next Idea -> ok. will take the C900B300 and go back to Marshmallow. From original HUAWEI site.
Took the European Version in German. Did it over EMUI (hold 3 Buttons) and worked so far but when I turned on I was stucking on the WIFI+. Even pressing the button -> further nothing anymore. So I thought -> maybe another stockfirmware useful.
Again C900B300 and then I think I did the big mistake. Took out the sdcard during it was rebooting (HUAWEI was already visible) and now it is big crap. Stucks at HUAWEI. Turning off not possible. This EMUI is not possible anymore. Just with a trick I am able to get into fastboot. Yeah. But what then? Reading TRWP which I know from Samsungs but putting it on with ODIN. ODIN doesn´t work with Huawei. Do I Need TRWP to get it back to normal Firmware? Mobile phone was never customized or anyhting else. just normal stock was on it and is the wish to get a clean back. Resetting to factory was not possible anymore.
So my questions, even I know it is my fault. Any rescue possible?
What could be the best stock Firmware. I Guess it is a single sim from Austria unlocked and unbranded. Would also take Nougat again. Just wanted to get it back to normal working and now I guess I have a big letter holder. Model from the backside is VNS-L31. More I don´t have.
Thanks a lot for any help for my being an idiot. Samsungs are much more easier than HUAWEIs.

Blimey mate,
This really just boil down to what partitions were damaged in your case- Most likely your system and data,
however since you are still Technically running unmodified emui you could manage to sort of salvage it.
The logic is this:
Most custom roms for the p9 lite build on top of emui (patching the system image) rather than replacing it (like the way samsung smartphones do)- so you could flash the rom, it would wipe your phone clean of viruses in the process and then proceed to do a hard restore back to emui.
1.) get your phone into fastboot and flash this twrp http://www.meticulus.co.vu/p/forum.html#nabble-td27
2.) Then flash this rom : http://www.meticulus.co.vu/p/ressurection-remix-for-hi6250-devices.html MAKE SURE YOU FOLLOW THE INSTRUCTIONS ON THIS SITE VERY CAREFULLY
3.)Follow this guide to do a hard restore https://forum.xda-developers.com/huawei-p9lite/how-to/tips-revert-custom-rom-to-official-t3668413
good luck!!! if you have any questions hit me up!

Hi
Hi Exiatron00,
thanks a lot for your maybe solution way. Will do it this evening after work and come back.
Hopefully it works cause as mentioned in other threads -> don´t think that the original owner opened the Debugging so that I can work over a tool. FRP locked is in fastboot. This was already mentioned in other posts which I have read here in the forums.
Thanks for your step by step explanation. Will do it. Hopefully it works. I am really pissed of my own that i was unpatient with the sdcard. That´s a mistake which shouldn´t happen. Anyway it did. So i will try to do everything to get back working again. I am from IT so I am not such a DAU but newbie with HUAWEIs. Most are Samsungs.
Will give Feedback.
CU

If u need to transfer files , just boot into twrp (it has built in mtp support) , then transfer the file from ur PC to phone via a micro us b cable.
If you are unable to fix the phone I do actually have a FULL twrp backup of my phone (EMUI 5- single sim Europe VNS- L31 C432B370) hit me up if u want it.

Hi,
well adb for flashing not working as device not found. Hi Suite installed. Guess that the USB Debugging is not enabled. hrmpf.
There is a similar thread of somebody with no enabled USB Debugging.
https://forum.xda-developers.com/nexus-4/help/fastboot-recovery-remotely-enable-usb-t2177440
He writes an solution how to enable in fast boot mode with using N4 toolkit.
Search for a p9 lite toolkit and found this
https://forum.xda-developers.com/hu...nt/europe-vns-l31-toolkit-bootloader-t3432873
may could work?
Big **** -> as Long as USB Debugging is not enabled as Long I am not able to Flash TWRP over adb.
If I connect to PC Hi Suite opens automatically. So driver should be fine as pc recognize the phone.
hm?

Got it working somehow
Exiatron00 said:
If u need to transfer files , just boot into twrp (it has built in mtp support) , then transfer the file from ur PC to phone via a micro us b cable.
If you are unable to fix the phone I do actually have a FULL twrp backup of my phone (EMUI 5- single sim Europe VNS- L31 C432B370) hit me up if u want it.
Click to expand...
Click to collapse
Hi Exiatron00,
got it working somehow!!!!
Bought a 3 day licence for DC Phoenix where you are able to put Firmware even in fastboot with FRB lock and no USB Debugging on.
So I got the IMEI and Fitting Version which is a L11.
Downloaded it original from Huawei as I still want a original stock Rom not customized which was
HUAWEI P9 Lite Firmware (VNS-L11, Android 6.0, EMUI 4.1, C432B161, WEU) only wokring one.
BUT the big Problem is that the apk Android System Web View is missing in the ROM. A known Problem by HUAWEI. Yeah now I am stucking in the Setup wizard like this guy who mentioned also the solution whell the reason of this Problem.
https://forum.xda-developers.com/hu...stuck-initial-setup-upgrade-to-t3498097/page2
So my question now. How do I get the apk on the phone still no USB Debugging? Does anyone have this Version original incl. this apk? Maybe an img. from a running working System?
Only way I am able to put the Firmware on is DC-Phoenix. It is valid still two days. Maybe someone can help me? Please?
So an Image of VNS-L11, Android 6.0, EMUI 4.1, C432B161, WEU incl. Android System Web View, so that I can go ahead and use the phone again please?
Thanks a lot.
Kind Regards.

How to make my VNS-L21 C432 B503 EMUI 5.0.3 Single-Sim to a Dual-SIM?

Hello everyone,
i would need help - if its possible anyway - to get the Dual-Sim working on my SS P9 lite.
Until now i was able to unlock BL, install TWRP Elite and SuperSU 2.82.
What do i have to do next?
Thank you in advance...
(PS: flashed some oeminfo - did not work, so i flashed back my original bached up oeminfo -
strange thing is that *#*#2846... is not working anymore - i recognized that because i wanted to
reinstall from HWOTA mode...? Should i orry about that?)

crouso said:
Hello everyone,
i would need help - if its possible anyway - to get the Dual-Sim working on my SS P9 lite.
Until now i was able to unlock BL, install TWRP Elite and SuperSU 2.82.
What do i have to do next?
Thank you in advance...
(PS: flashed some oeminfo - did not work, so i flashed back my original bached up oeminfo -
strange thing is that *#*#2846... is not working anymore - i recognized that because i wanted to
reinstall from HWOTA mode...? Should i orry about that?)
Click to expand...
Click to collapse
Hello,
had you already took a look at @k1ll3r8e's thread ?
He made a toolkit that can do what you need.
Best regards
Edit:
Dude you can do that also without the toolkit.
You only need the right oeminfo dual sim
and the correct rom.
Feel free to ask...

hello dadditz,
thank you for your reply! Of course i read a lot here and other sites, and also found the P9 toolkit! But my problem was/is, that i cant "upgrade" to VNS-L21C432B160 because i already was on VNS-L21C432B503 ... so i tried different things, but it did not work. Always the menue "Dual sim configuration" was not in the settings menue... and the image felt little bit "laggy"...
BUT
i was giving it another try - i downgraded from Nougat to MM with this ... tutorial and repeated the steps listed in the P9 lite toolkit... and now i have the Dual-Sim menue in the settings dialogue... and it is working
Because its not "enough" i wanted to return to Nougat - until now with no success... so am i now stuck on VNS-L21C432B160 ?
I tried some images from 380/370/336 but the huawei recovery always stops on 5% and denies the update - how can i upgrade again?
kind regards

crouso said:
hello dadditz,
thank you for your reply! Of course i read a lot here and other sites, and also found the P9 toolkit! But my problem was/is, that i cant "upgrade" to VNS-L21C432B160 because i already was on VNS-L21C432B503 ... so i tried different things, but it did not work. Always the menue "Dual sim configuration" was not in the settings menue... and the image felt little bit "laggy"...
BUT
i was giving it another try - i downgraded from Nougat to MM with this ... tutorial and repeated the steps listed in the P9 lite toolkit... and now i have the Dual-Sim menue in the settings dialogue... and it is working
Because its not "enough" i wanted to return to Nougat - until now with no success... so am i now stuck on VNS-L21C432B160 ?
I tried some images from 380/370/336 but the huawei recovery always stops on 5% and denies the update - how can i upgrade again?
kind regards
Click to expand...
Click to collapse
Hey,
I think you could save yourself from going back
at MM, but, the omelette is made now ...
Have you already done a factory reset + wipe cache in stock recovery ?
Tell me a little bit when you reboot the device
does any warning text come out ? if yes, what color ?

Dadditz said:
Hey,
I think you could save yourself from going back
at MM, but, the omelette is made now ...
Have you already done a factory reset + wipe cache in stock recovery ?
Tell me a little bit when you reboot the device
does any warning text come out ? if yes, what color ?
Click to expand...
Click to collapse
Well, when i was on Nougat, i was not able to see the "Dual Sim Settings" in the settings menue - i tried 20 times
i think... when i went "back" to MM the menue was immediately there...
I did the factory reset and wiped cache in stock recovery menue.
Booting up my device seems all fine - bootloader is relocked, no warnings or anything...
HiSuite told me that my device "has the latest developer version" and no upgrade would be available...
I tried to flash the firmware with TWRP - without success...; when i try dload the phone stuck on 5%... i also
tried the "-PV" versions - without any luck...
So i really have no idea left how to upgrade from this version?!

crouso said:
Well, when i was on Nougat, i was not able to see the "Dual Sim Settings" in the settings menue - i tried 20 times
i think... when i went "back" to MM the menue was immediately there...
I did the factory reset and wiped cache in stock recovery menue.
Booting up my device seems all fine - bootloader is relocked, no warnings or anything...
HiSuite told me that my device "has the latest developer version" and no upgrade would be available...
I tried to flash the firmware with TWRP - without success...; when i try dload the phone stuck on 5%... i also
tried the "-PV" versions - without any luck...
So i really have no idea left how to upgrade from this version?!
Click to expand...
Click to collapse
Use Firmware Finder to force the upgrade, download it from the store.
VPN method worked fine for me (i was on android 7).
Inside the app all the info, anymore
a thread is present here on XDA.
Give it a try...
You're on B160, go for B370 PV version, check compatibility otherwise choose for full ota one.
Good luck
Cheers

Need help getting a stock rom for my Huawei P8 lite 2015

A couple months ago I attempted to root my phone and install twrp which worked until I tried to install a custom rom, it did not work, I then tried to reinstall my backup that I made with TWRP but it failed and now this phone is a brick, it is just stuck on the start up screen, fastboot works but none of the roms I have managed to find work, if there is anyone out there who knows what to do I would really appreciate it, I have this phone for a very long time, I know that I can rescue it. It is a Huawei P8 lite South Africa with vodafone, thats all i remember. thanks