Database Users

Jiayu S3 PIN Locked by Kinguser app

First of all, I may be posting this in the wrong section. But I desperately need your help on this.
I got a Jiayu S3, and couldn't not try to flash a custom rom on it, so I tried with "Pure AOSP V1 TF".
All went well, untill i found this app which was included with the rom, "Kinguser" (should be Superuser, i believe), which game me the option to toggle root.
At first and only time I opened this Kinguser app, option root was active. I did deactivate it, and reactivated immediately after.
As soon as i reactivated root, the privacy pin screen showed up.
I didn't set any PIN on my phone, so at first i thought it could be something like 1111 or 0000. Tried 5 times and it made me wait 30 seconds. Then tried another 3-4 times.
Here began the real mess: "forgot pin" (or psw) didn't show up, but at the time i didn't even know about that recovery option.
I didn't know what to do, so I just thought that a factory reset would certainly solve the problem, how couldn't it? Well, wiped everything, but PIN lock screen didn't go away.
So, wiping everything, I also deleted my gmail account from the phone, and I lost the possibility to lock phone and give it a new password (Android Device Manager). Too bad at the time I didn't know about this recovery option as well...
Now I'm out of ideas. I think I've tried every method I could find with a search of "Smartphone PIN locked". Tried with resets, plugins, deleting files with adb..
How do I unlock my phone?
little update: after a factory reset, for 2-3 seconds, it shows the default initial screen, but it doesn't last more that and i just can't do anything.
Now i managed to bring back the stock rom, but with that i lost the twrp recovery, and i can't find a way to make pc recognize the phone to reflash it.
It seems it's going worse instead of better...

I had just bought this Jiayu S3 and planned to bring it on holidays on wednesday, but i'm starting to think i won't be able to fix it before then

Did you have any resolution to this problem. I am currently sitting in the exact same boat. Did the factory reset, pass code screen still there, I didn't set a pass code. Basically hands tied, can't update firmware, guessing i'll have to get a new phone, but hoping maybe you found a miracle cure! ha! - Thanks for any guidance. - Arden (Seattle, WA)

Just flash another rom (stock/original) and start over.

How have you done that?
Can you help please?
I tried factory reset (volume plus+ power button), hard reset (volume- plus power button), update, and nothing works; I also went to two different specialized stores and they failed to find a way to reinstall the original Android version or a recent one.
Comparing the files with the factory version installed in the phone, the phone report identified three changes:
- a new file: /system/priv-app/7mK0T6e8Z5.apk
- the lost of a file: /system/app/com.android.fallen.apk
- and a modified file: /system/bin/debuggerd

AzulFogo said:
How have you done that?
Can you help please?
Click to expand...
Click to collapse
To flash firmware you can use SP Flash Tool on a windows or linux computer (not sure about macosx). You have to decide which firmware you want (which one do you have now?). The 'official' firmwares can be found on needrom. SP Flash Tool can be found there as well. There are 2 popular LP firmwares built by Jiayu resellers in Europe (Xtreme from Spain and Jiayu.de from Germany). Guides on how to flash are often present at the place where you find the firmware.

Dior DNA said:
To flash firmware you can use SP Flash Tool on a windows or linux computer (not sure about macosx). You have to decide which firmware you want (which one do you have now?). The 'official' firmwares can be found on needrom. SP Flash Tool can be found there as well. There are 2 popular LP firmwares built by Jiayu resellers in Europe (Xtreme from Spain and Jiayu.de from Germany). Guides on how to flash are often present at the place where you find the firmware.
Click to expand...
Click to collapse
Thank you!
I found "Xtreme from Spain":
needrom.com/download/rom-xtreme-rom-tf/
I found the "SP Flash Tool":
needrom.com/download/sp-flash-tool-v5-1424-00/
but it is for Linux... can you send me the link of the windows version?
And I could not found the "Jiayu.de from Germany": can you send the link?
Also, can you recommend some good manual for dummies?
Thanks again for your patient and help!

latest sp flash tools is 5.1532
search needrom with "5.1532" will leed you to the download page
no link allowed here, so ...
for beta 10 from jiyau.de, search google with "jiyau.de Lollipop 5.1.1 - Beta 10 (14.10.2015)".
it will leeds you to the rom.
Good hunting
tuto sp flash tool
https://youtu.be/ztI8sc8MUNo

AzulFogo said:
Thank you!
I found "Xtreme from Spain":
needrom.com/download/rom-xtreme-rom-tf/
I found the "SP Flash Tool":
needrom.com/download/sp-flash-tool-v5-1424-00/
but it is for Linux... can you send me the link of the windows version?
And I could not found the "Jiayu.de from Germany": can you send the link?
Also, can you recommend some good manual for dummies?
Thanks again for your patient and help!
Click to expand...
Click to collapse
see jaunedoeuf's answers
I would like to add: if you come from KK and go to LP, you must use firmware upgrade to update/adjust internal SD partition layout. Good Luck! if you succeed, and are happy with firmware, consider voting @ http://forum.xda-developers.com/android/general/firmware-jiayu-s3-t3212184 (almost 100 votes)

First, thank you for your great help!
With your suggestions, I managed to install Lolipop in my Jiayu S3S (upgraded from Kit Kat) - Xtreme ROM TF (JiayuS3-5.1Extreme1.1SP.zip).
However the problem remain... the phone still is asking for a PIN (that I never had put there, in first place)...
What should I do now?

you could try factory reset and are you sure its the phone asking for pin and not the sim card

Recovery bricked after Nougat update?

First excuse me for opening an other thread like this, i think i have read all other threats regarding my problem, but none have the same situation
My Huawei M3 Wifi (BTV-W09) seems semi bricked after installation of Nougat Update.
The Installation (Force Install with dload) gave me an error and also while boot i got the error message: "Your device has failed verification and may not work properly."
I have the option to press "Powerbutton" and the device will boot up. I checked the Version and it showed android 7 + EMUI 5. The only problem was that almost every system app was missing, like keyboard, calendar etc. (playstore was there)
So i tried to do the rollback with:
HUAWEI MediaPad M3 8 Rollback Package%28BTV-W09 %2CC900B300%2C EMUI5.0%2BAndroid7.0 rollback to EMUI4.1%2BAndroid 6.0%29
The Installtion (force update) gets stuck at 5% and after like 3-5 minutes the tablet will boot up showing the same boot error that can be skipped with pressing powerbutton. I checked sytem and it still showed "android 7 + EMUI 5" but built : BTV-W09C900B300
I think this is the one i "need" to be able to install the "HUAWEI MediaPad M3 8 Firmware %28BTV-W09 %2CC100B006%2C EMUI4.1%2BAndroid 6.0%29"
Problem is regardless which "update.app" i try to force install will get stuck at 5% and give me same error. I have ADB/Fastboot installed and tried some different things like flashing/unbricking it with "Huawei Multitool" where you can extract like boot.img or recovery.img and try to flash it.
Also getting an error. I can access eRecovery witout problems, the option to fix it by itself by wifi doesn`t work. I can´t access "normal" recovery and i think there is the problem (may got bricked while flashing Nougat?) I think its recovery problem, cause when i boot it up to the "half-installed" Android and go into setting "hard-reset" option i know it would boot up intoi recovery and would erease everything, while bootup it shows error "reset failed".
In fastbootmode i see bootloader: unlocked FRM: unlocked
I tried to install TWRP recovery with adb but get error: adb remote command not allowed
I downloaded like 15 different Android Versions 6+7 Emui 4.1+5 to try with force update but none worked, may i have to flash special version of recovery first?
I just want a normal version of android 6 or 7 i dont mind but at the moment with half working 7 "without" systemapps its a hardtime.
I hope someone can help me.
This isnt my first android device and im not a total noob i unlocked bootloader and flashed kernels on many other phones but with the W-09 where i did nothing special i dont get why "recovery got broken"
Thanks in advance

You haven't read other threads too well: more times people reported that the bootloader got locked after an update still declaring itself unlocked!
Second thing you have not found: the Nougat update consist of 2 packages and the second must be installed from TWRP.

nicolap8 said:
You haven't read other threads too well: more times people reported that the bootloader got locked after an update still declaring itself unlocked!
Second thing you have not found: the Nougat update consist of 2 packages and the second must be installed from TWRP.
Click to expand...
Click to collapse
thanks for your anwser, i read that so i also tried unlocking it "again" and it quotet it is also unlocked in adb. I also know that there are 2 packages. That you need TWRP i didnt know thanks so i am a bit smater now. I think i ll try "relock" and unlock it again might be the right way, thanks for the tip.

kivi90 said:
I think i ll try "relock" and unlock it again might be the right way, thanks for the tip.
Click to expand...
Click to collapse
This is nonsense. Unlock, install the right TWRP then install the second zip package.

nicolap8 said:
This is nonsense. Unlock, install the right TWRP then install the second zip package.
Click to expand...
Click to collapse
i cant unlock cause i dont have the code, on the huawei page i try do make an account and get the code by providing the necessary information.
I just uploaded a picture, i choose "before EMUI5" cause this is the only option i can choose "tablets". --> i choose "tablet wifi" , enter product model "BTV-W09" then the serialnumber i can see in setting: 28D6R17316XXXXXX but then i have the problem to input product id, it say i can get it through "Dialer" app (which i dont have in wifi model ) or the calculator. Problem is in my damaged installation there is no huawei calc, other calcs from store dont work (read that problem in other threats) I tried many apps from appstore to get a product ID but huawei site keeps saying wrong product ID =/
With the program DC Unlocker i am able to see a MEID i dont know if its the right one, i tried my luck with the Product ID Generator from Huawei but it doenst work. (device not supported)

It's very strange that it says bootloader unlocked if you have never unlocked...
And was very stupid to try to installl a beta release without before unlocking and taking a backup.
Exhange your device for a Nokia 3110!

nicolap8 said:
It's very strange that it says bootloader unlocked if you have never unlocked...
And was very stupid to try to installl a beta release without before unlocking and taking a backup.
Exhange your device for a Nokia 3110!
Click to expand...
Click to collapse
yeah at this device i never touched bootloader, i didnt think it would become such a big deal , i didnt want unlocked bootloader or other recovery just newest android. Never had any problems with the "force update function" to come back to stock. I tried DC Unlocker but cant get further cause device need to get into manufature mode (thorugh dialer or calculator which i both dont have) i hope maybe i find one more way.

Did you ever find a fix
Did you ever find a way to fix this. I'm in the same situation. I even did a VPN on my router to give me a Hong Kong address for erecovery and that still didn't work. I have the exact same product. Like you I tried to various attempts to download a new recovery, but nothing works. Nice hardware, but some of the worst software/firmware I have ever dealt with since starting with the first release of Android on the HTC Hero.

kivi90 said:
yeah at this device i never touched bootloader, i didnt think it would become such a big deal , i didnt want unlocked bootloader or other recovery just newest android. Never had any problems with the "force update function" to come back to stock. I tried DC Unlocker but cant get further cause device need to get into manufature mode (thorugh dialer or calculator which i both dont have) i hope maybe i find one more way.
Click to expand...
Click to collapse
I had mostly the same problem. I rolled back to 4.1 using the rollback and the actual 4.1 update.app. I think that puts you on C100 if I remember right. Tablet I have is C128 (USA) but no problem for this step. Get the Product ID from the calculator. Allow OEM unlock in the settings, then unlock it using the unlock code. Email yourself the unlock code because who knows if their website will even be functional next time. Alternatively you can extract the stock calculator from the update_data_usa.zip or whatever and try to use DC with 5.0. That second update zip does not install properly via the dload method, so a bunch of stock apps don't get installed. You can kind of hack it and flash it via TWRP but I didn't do it that way.
Or...you can use firmware finder to force an OTA from 4.1 right up to 5.0 (350), then take that last partial OTA to 351 after as well. The way to do that is via DNS in firmware finder. Find the Full OTA in firmware finder you want, send it to the updater by changing your DNS the way it tells you to, and when it does the OTA, everything will be properly installed basically the official way. Good as new. Flash TWRP to recovery2 and replace the erecovery. Keep the stock recovery as is. Install magisk. Golden.
---------- Post added at 03:36 AM ---------- Previous post was at 03:26 AM ----------
kivi90 said:
So i tried to do the rollback with:
HUAWEI MediaPad M3 8 Rollback Package%28BTV-W09 %2CC900B300%2C EMUI5.0%2BAndroid7.0 rollback to EMUI4.1%2BAndroid 6.0%29
The Installtion (force update) gets stuck at 5% and after like 3-5 minutes the tablet will boot up showing the same boot error that can be skipped with pressing powerbutton. I checked sytem and it still showed "android 7 + EMUI 5" but built : BTV-W09C900B300
I think this is the one i "need" to be able to install the "HUAWEI MediaPad M3 8 Firmware %28BTV-W09 %2CC100B006%2C EMUI4.1%2BAndroid 6.0%29"
Problem is regardless which "update.app" i try to force install will get stuck at 5% and give me same error.
Click to expand...
Click to collapse
Also, as far as the rollback, you need to do the first one (the C900 which is just a compatibility fix to allow rollback, previously used by beta testers I believe). Then you need to do the second one, the C100. If it is getting stuck, try downloading it again and be sure you don't have anything else in the /dload directory on either internal or the sd card. I had one on both at one point so maybe that happened to you. The C900 should be very quick but the C100 will slowly progress after 5% all the way around in several minutes.
When you get to updating back to 5.0, you can choose whichever region you want as long as it is a full OTA. C128 is USA and that's what I bought so that's what I picked. That gets you back in the right OTA update channel after that.

Hi guys,
I started as a novice and have learnt the hard way.
Has anyone tried rollback to EMUI 4.1 EU version on a US device (W09) and are there any problems I should be aware of?
I have had the exact same problem shared in this thread and have gone through the pain of finding a solution. My last resort is to rollback to 4.1 and restart the whole process.
@deV14nt: you suggested that when updating back to EMUI 5.0, I can choose the region even if my EMUI4.1 is EU version. How does this work?
Thanks in advance for your help.

Axon 7: No connectivity after upgrade to 7.1.1

Hi
I have Axon 7 A2017G. Bought from AliExpess in Feb of this year. It has been a very good phone so far with no issues. Well, at least until yesterday.
I was on Android 6 until yesterday when I found out that I can upgrade to Android 7.1.1. So, I stupidly upgraded to 7.1.1 (getting the upgrade from from ZTE) and now I have *lost my connectivity* (I am using three.co.uk sim). It doesn't recognise my sim card at all.
I have tried deleting and wiping the cache - no joy. Not sure what else to do.
I tried to use other upgrade from ZTE (Nougat to Marshmallow) and Marshmallow. Both fail with 'e footer is wrong e signature verification failed installation aborted'.
Everything else seems to be fine and I have had no issues with Axon 7 (had it since Feb) before the upgrade.
Hope someone can either help to get the connectivity back or somehow degrade my Android back to 6 (when it was all working fine).
Thanks Robie

SlickRobie said:
Hi
I have Axon 7 A2017G. Bought from AliExpess in Feb of this year. It has been a very good phone so far with no issues. Well, at least until yesterday.
I was on Android 6 until yesterday when I found out that I can upgrade to Android 7.1.1. So, I stupidly upgraded to 7.1.1 (getting the upgrade from from ZTE) and now I have *lost my connectivity* (I am using three.co.uk sim). It doesn't recognise my sim card at all.
I have tried deleting and wiping the cache - no joy. Not sure what else to do.
I tried to use other upgrade from ZTE (Nougat to Marshmallow) and Marshmallow. Both fail with 'e footer is wrong e signature verification failed installation aborted'.
Everything else seems to be fine and I have had no issues with Axon 7 (had it since Feb) before the upgrade.
Hope someone can either help to get the connectivity back or somehow degrade my Android back to 6 (when it was all working fine).
Thanks Robie
Click to expand...
Click to collapse
The problem is probably that you do not have an A2017G. Turn your phone around and tell me what the model erched into the back of the phone is. I suspect that you have an A2017, you didn't read the little paper that came with the phone that explained what they (the aliexpress seller) did with it, and you flashed an A2017G ROM on your A2017, effectively messing up the modem file.
I don't know if flashing through EDL fixes the issue, but it might be worth trying. It involves downloading a FULL_EDL package (the full system for your device model), then flashing it entirely through EDL.
The failproof method is to unlock the bootloader, flash TWRP, then flash the modem file corresponding to your device.

Choose an username... said:
The problem is probably that you do not have an A2017G. Turn your phone around and tell me what the model erched into the back of the phone is. I suspect that you have an A2017, you didn't read the little paper that came with the phone that explained what they (the aliexpress seller) did with it, and you flashed an A2017G ROM on your A2017, effectively messing up the modem file.
I don't know if flashing through EDL fixes the issue, but it might be worth trying. It involves downloading a FULL_EDL package (the full system for your device model), then flashing it entirely through EDL.
The failproof method is to unlock the bootloader, flash TWRP, then flash the modem file corresponding to your device.
Click to expand...
Click to collapse
Doh! Doh! Doh! :crying:
You are ABSOLUTELY correct. I didn't read that little paper that came with it because it was all Chinese - not English. Damn - why didn't I check. :crying:
When I bought it, the website said it was a 2017G model and therefore I assumed it was 2017G model.
Anyway, I don't understand some of the things you wrote (I am okay with upgrade and such like but not so much programming lark). What is this FULL_EDL package and how straight forward would it be for me to use it? Where do I get hold of it?
Everything is fine except phone call, sms and data of course. Internet connection is fine and all the apps works too.
Another question, would it help if I did a full factory reset and then applied the correct upgrade? I have backup of all my apps, contacts, pictures, music, etc.
Thanks
Robie

SlickRobie said:
Doh! Doh! Doh! :crying:
You are ABSOLUTELY correct. I didn't read that little paper that came with it because it was all Chinese - not English. Damn - why didn't I check. :crying:
When I bought it, the website said it was a 2017G model and therefore I assumed it was 2017G model.
Anyway, I don't understand some of the things you wrote (I am okay with upgrade and such like but not so much programming lark). What is this FULL_EDL package and how straight forward would it be for me to use it? Where do I get hold of it?
Everything is fine except phone call, sms and data of course. Internet connection is fine and all the apps works too.
Another question, would it help if I did a full factory reset and then applied the correct upgrade? I have backup of all my apps, contacts, pictures, music, etc.
Thanks
Robie
Click to expand...
Click to collapse
Not at all, this is much more messed up. A factory reset only wipes data, you need to fix a part of the system. If you are okay with unlocking your phone (i think you don't have warranty anyways) then you should do that, there are guides but be sure that they are FOR THE A2017!
After unlocking you need to install TWRP, those guides usually also explain you how to do this. Then you download this file and flash it through TWRP (put it in the phone, go to TWRP, Install - select the zip - swipe to start)

It may help understanding to know that there are 3 models.
A2017 is the Chinese one, A2017U is the American one and A2017G is multinational/European. There are different telephony frequency bands in use around the world and the Chinese one also has different storage and memory. A bit bummed they held that back from the rest of the world.....

Choose an username... said:
Not at all, this is much more messed up. A factory reset only wipes data, you need to fix a part of the system. If you are okay with unlocking your phone (i think you don't have warranty anyways) then you should do that, there are guides but be sure that they are FOR THE A2017!
After unlocking you need to install TWRP, those guides usually also explain you how to do this. Then you download [https:// androidfilehost.com/?fid=457095661767137840]this file and flash it through TWRP (put it in the phone, go to TWRP, Install - select the zip - swipe to start)
Click to expand...
Click to collapse
Thank you for quick response.
Yes, you are correct, warranty is non-issue anyway and I will make sure it is for A2017 (not A2017G/U). Wish I had just checked the back of the phone then I would not have ended up here but it is nice to learn new things, however painful..
Thanks for the heads up on the process as well. There goes my weekend but the boss (wife) is away so it is okay.
I will report if I manage to get it working next week. Wish me luck.
Robie

Update.
I spent the weekend on this and sadly didn't get anywhere. I followed the instructions and download from here:
http://https://forum.xda-developers.com/axon-7/how-to/guide-b13-chinese-a2017-root-unlock-t3549873.
Unfortunately, no joy. I can get my phone in EDL mode (drivers downloaded & suetup successfully, COM port is correct, etc) but the following commands just sit forever. They don't respond at all.
axon7backup.exe -p COM# -d
axon7root.exe -p COM# -r
Not sure where to go from here. If anyone has any ideas then please let me know.
Thanks.
Robie

P8Lite removing encryption

Hi,
I think I made a big mistake when playing around with an branded P8 Lite. Unlocking went well and I was able to install TWRP ( Elite Dev. 3.2.1 ) Sofar so good. But since I did not assign an screen unlock code before it is not possible to remove the encryption at all. So not possible to flash a different ROM, tried several tips I found but nothing worked. Since the phone was never used before there is nothing on it which might be worthwhile to back up. Endresult is that I can access the phone via ADB and fastboot. But that's it.
Anybody with a clue on how to proceed ?
Tks
Henning

Device not starting/black screen after stock-ROM flash via Odin

Hello, everyone,
I tried to install LineageOS on my S10 Plus yesterday. That worked so far, but I found that it didn't have a decent camera app and the Samsung Watch wasn't that easy to connect either. So I thought I'd just go back to the Stock ROM again. I then downloaded the latest stock firmware according to this guide and installed it with Odin. The installation also runs through, after the installation the mobile phone starts and after the start screen there is an Android man with the signature "Erasing". After a few seconds, the device turns off and stays black. Even if I put it on the charger or try to restart it, nothing happens. I keep getting into download mode and recovery, but that's about it. Multiple reinstallations and resets via the recovery didn't help - the phone just won't start.
I used the CSC_... and not the HOME_CSC_... at the firmware is the right one for my phone.
Is there any way I can salvage the device? I'm afraid that something in the memory is defective now, which has nothing to do with the flashing itself. Do you have any ideas?
Many thanks!

tefracky said:
Hello, everyone,
I tried to install LineageOS on my S10 Plus yesterday. That worked so far, but I found that it didn't have a decent camera app and the Samsung Watch wasn't that easy to connect either. So I thought I'd just go back to the Stock ROM again. I then downloaded the latest stock firmware according to this guide and installed it with Odin. The installation also runs through, after the installation the mobile phone starts and after the start screen there is an Android man with the signature "Erasing". After a few seconds, the device turns off and stays black. Even if I put it on the charger or try to restart it, nothing happens. I keep getting into download mode and recovery, but that's about it. Multiple reinstallations and resets via the recovery didn't help - the phone just won't start.
I used the CSC_... and not the HOME_CSC_... at the firmware is the right one for my phone.
Is there any way I can salvage the device? I'm afraid that something in the memory is defective now, which has nothing to do with the flashing itself. Do you have any ideas?
Many thanks!
Click to expand...
Click to collapse
same thing happened to me today. but I flashed my s10e the bootloader and modem file of android 9 from twrp, the phone did not boot up and I loaded the stock rom again, then when I open it, it's the same as yours, I really need urgent help.
Releases · corsicanu/9820-bootloaders_and_modems
Contribute to corsicanu/9820-bootloaders_and_modems development by creating an account on GitHub.
github.com
EDİT: Anyway, I solved the problem, I flashed the bootloader and modem file that is suitable for my current version from the same site with twrp and the phone turned on. maybe you can solve it by flashing the bootloader and modem file suitable for the current version. try if you want

Thanks a lot, this worked!

tefracky said:
Thanks a lot, this worked!
Click to expand...
Click to collapse
I'm glad it worked.
I was very afraid that the phone died, what did you do for 5 days in this state?
Now I have a question in my mind: When Samsung releases an update in the future, will the bootloader and modem files be updated when we update it with odin? won't it be updated? After that, do we will always update manually as twrp? do you have any idea?

Well, I simply didn't use a mobile phone in these days. It was a very "interesting" experience, but not a huge problem. I sometimes opened WhatsApp as Windows App (interestingly, which works without phone).
I don't know, what happens at a Samsung Update, but until Android 13, I will not update (so probatly never). In our German forum (www.android-hilfe.de), a pre rooted and debloated "Stock"-Firmware is provided, but I can't install it, since my Bootloader is too new (V15 instead V14 for the ROM). When it is possible, I will install this firmware. If you are interested, here is the link: https://www.android-hilfe.de/forum/...3-2022-stock-rom-v2-0-pre-rooted.1000713.html

tefracky said:
Well, I simply didn't use a mobile phone in these days. It was a very "interesting" experience, but not a huge problem. I sometimes opened WhatsApp as Windows App (interestingly, which works without phone).
I don't know, what happens at a Samsung Update, but until Android 13, I will not update (so probatly never). In our German forum (www.android-hilfe.de), a pre rooted and debloated "Stock"-Firmware is provided, but I can't install it, since my Bootloader is too new (V15 instead V14 for the ROM). When it is possible, I will install this firmware. If you are interested, here is the link: https://www.android-hilfe.de/forum/...3-2022-stock-rom-v2-0-pre-rooted.1000713.html
Click to expand...
Click to collapse
thanks, if i'm going to use stock rom i prefer to root it myself