Hi,
I try to root the chinese version of Galaxy J3 2016 (J3109).
I've done all the step (enable debugging, download mode, putting the boot.img on the root).
After choosing the md5 root file in odin and clicking on Start, the phone start downloading file but after I have a chinese message.
=> After reboot, the phone is not rooted.
Do the chinese version need a special root method?
Thank you in advance.
makertoo said:
Hi,
I try to root the chinese version of Galaxy J3 2016 (J3109).
I've done all the step (enable debugging, download mode, putting the boot.img on the root).
After choosing the md5 root file in odin and clicking on Start, the phone start downloading file but after I have a chinese message.
=> After reboot, the phone is not rooted.
Do the chinese version need a special root method?
Thank you in advance.
Click to expand...
Click to collapse
Did you unlock it with CROM service apk?
ashyx said:
Did you unlock it with CROM service apk?
Click to expand...
Click to collapse
No , I received the phone unlocked (= I can use any simCard). I juste googled now the CROM service apk but I couldn't understand its utility.
Also, something I found weird is when I allow usb debbugging in developer option: I can't find Oem Unlock..
makertoo said:
No , I received the phone unlocked (= I can use any simCard). I juste googled now the CROM service apk but I couldn't understand its utility.
Also, something I found weird is when I allow usb debbugging in developer option: I can't find Oem Unlock..
Click to expand...
Click to collapse
There is no oem unlock that's what CROM service apk is for.
ashyx said:
There is no oem unlock that's what CROM service apk is for.
Click to expand...
Click to collapse
Thank you.
I have now another error in the download mode:
"binary size is too large boot"
I've taken the j3 320fn root file but it doesn't seems to work for me. Is there a j3109 root files?
Otherwise, is there a valid Recovery for J3109 version?
Related
Hey Everyone...Just a question on how to root the HTC BOLT...
So I know you have to unlock the boot loader first . After this can you use Kingo Root to root your HTC BOLT, If not what files would I need then in order to root my device. Trying this out for the first time.
Are there any links that can be provided or a video perhaps to point me in the right direction?
Thanks
Jay
jortiz31877 said:
Hey Everyone...Just a question on how to root the HTC BOLT...
So I know you have to unlock the boot loader first . After this can you use Kingo Root to root your HTC BOLT, If not what files would I need then in order to root my device. Trying this out for the first time.
Are there any links that can be provided or a video perhaps to point me in the right direction?
Thanks
Jay
Click to expand...
Click to collapse
1. unlock via htcdev.com
2. flash twrp
3. boot into twrp
4. flash either SuperSU or Magisk (I prefer Magisk, as it can hide root status for Android Pay)
So when I am in HTC download mode...I am not sure which option I am supposed to choose, On the htc site it says highlight fastboot but on the phone itself I see
System Info
Show Barcode
Reboot to bootloader
Reboot to downloader mode
Reboot
Shut down
OMJ said:
1. unlock via htcdev.com
2. flash twrp
3. boot into twrp
4. flash either SuperSU or Magisk (I prefer Magisk, as it can hide root status for Android Pay)
Click to expand...
Click to collapse
jortiz31877 said:
So when I am in HTC download mode...I am not sure which option I am supposed to choose, On the htc site it says highlight fastboot but on the phone itself I see
System Info
Show Barcode
Reboot to bootloader
Reboot to downloader mode
Reboot
Shut down
Click to expand...
Click to collapse
that inf on the website is old/outdated, you dont select anything in download mode, just use this cmd from pc: fastboot oem get_identifier_token
omj said:
that inf on the website is old/outdated, you dont select anything in download mode, just use this cmd from pc: fastboot oem get_identifier_token
Click to expand...
Click to collapse
thank you for this information it has worked
much appreciated for the assistance
Every time I put the code in at the htc Dev site get error on code being wrong length I did everything it said too on phone and PC can't copy and past on the terminal on the PC have to select all copy then edit out all the stuff that don't need. i got it unlocked it was my browser dont use opera it put lines under all the token codes causing the string to be wrong size
hello my friends i have a problem with my (galaxy j5 model j5008)
i need your help in unlocking bootloader
pleas give me methods or tutorial for unlocking my j5 bootloader
Thanks
peshmarga said:
hello my friends i have a problem with my (galaxy j5 model j5008)
i need your help in unlocking bootloader
pleas give me methods or tutorial for unlocking my j5 bootloader
Thanks
Click to expand...
Click to collapse
enable OEM unlock
Dyeide said:
enable OEM unlock
Click to expand...
Click to collapse
and after that ? Is there a specific guide to unlock or it should work with normal command via fastboot mode?
Valalla Rising said:
and after that ? Is there a specific guide to unlock or it should work with normal command via fastboot mode?
Click to expand...
Click to collapse
You need to plug your phone into the computer in download mode after that and using Odin on a PC flash twrp.IMG.tar file for your specific device but make sure to turn off auto reboot in Odin.
Then once the file flashes successfully you need to pull out the battery, put it back in and reboot to recovery before doing anything else. If you reboot the os first then it will delete twrp and revert back to stock recovery so make sure to boot to recovery first
garylawwd said:
You need to plug your phone into the computer in download mode after that and using Odin on a PC flash twrp.IMG.tar file for your specific device but make sure to turn off auto reboot in Odin.
Then once the file flashes successfully you need to pull out the battery, put it back in and reboot to recovery before doing anything else. If you reboot the os first then it will delete twrp and revert back to stock recovery so make sure to boot to recovery first
Click to expand...
Click to collapse
hi, thank you for you kind reply. So you are talking to install a custom recovery ! will this procedure either unlock the BL? I do not remember if TWRP image files are downloadeble also in .tar format and from their official site? Awaiting your reply
Valalla Rising said:
hi, thank you for you kind reply. So you are talking to install a custom recovery ! will this procedure either unlock the BL? I do not remember if TWRP image files are downloadeble also in .tar format and from their official site? Awaiting your reply
Click to expand...
Click to collapse
Installing a custom recovery is unlocking your bootloader. It means the same thing.
Here is the latest twrp in .tar format for your device (j5008) https://github.com/Galaxy-MSM8916/releases/releases/tag/TWRP-3.2.3-lineage-15.1_j8_20180921_j5ltechn
garylawwd said:
Installing a custom recovery is unlocking your bootloader. It means the same thing.
Here is the latest twrp in .tar format for your device (j5008) https://github.com/Galaxy-MSM8916/releases/releases/tag/TWRP-3.2.3-lineage-15.1_j8_20180921_j5ltechn
Click to expand...
Click to collapse
Are you sure that install a custom recovery will also unlock the bootloader? I don't think so! For me they are two different operation! Anyway my device is j510fn 2016 not j5008. Glad to start a conversation!
Valalla Rising said:
Are you sure that install a custom recovery will also unlock the bootloader? I don't think so! For me they are two different operation! Anyway my device is j510fn 2016 not j5008. Glad to start a conversation!
Click to expand...
Click to collapse
Lol . Installing custom recovery is only possible when you have unlocked bootloader .
unlock bootloader
I've tried to unlock bootloader on my j510fn via fastboot but when ever I plug in device to the pc and running adb command, it stuk in downloading mode like when you make odin the platform to install recovery.tar and official firmware to newst. In a few words I can't unlocking bl via bastboot even if I have oem unlocked in the dev options.
Valalla Rising said:
I've tried to unlock bootloader on my j510fn via fastboot but when ever I plug in device to the pc and running adb command, it stuk in downloading mode like when you make odin the platform to install recovery.tar and official firmware to newst. In a few words I can't unlocking bl via bastboot even if I have oem unlocked in the dev options.
Click to expand...
Click to collapse
fast boot? You mean download mode?
There is no adb commands either this is a Samsung device you vacant unlock your bootloader by adb commands.
To unlock the boot loader download Odin to your PC.
Enable usb debugging and oem unlock in developer options of your phone.
Download twrp for your device from here https://github.com/Galaxy-MSM8916/releases/releases/tag/TWRP-3.2.3-lineage-15.1_j35_20180921_j5xnlte (j510fn)
Put the phone into download mode and connect to PC
Click the AP tab in Odin and find your twrp.zip.tar file.
Disable auto reboot in Odin.
Flash the file.
Pull out the battery
Reboot to recovery before rebooting the os and BANG unlocked bootloader with twrp installed
garylawwd said:
fast boot? You mean download mode?
There is no adb commands either this is a Samsung device you vacant unlock your bootloader by adb commands.
To unlock the boot loader download Odin to your PC.
Enable usb debugging and oem unlock in developer options of your phone.
Download twrp for your device from here https://github.com/Galaxy-MSM8916/releases/releases/tag/TWRP-3.2.3-lineage-15.1_j35_20180921_j5xnlte (j510fn)
Put the phone into download mode and connect to PC
Click the AP tab in Odin and find your twrp.zip.tar file.
Disable auto reboot in Odin.
Flash the file.
Pull out the battery
Reboot to recovery before rebooting the os and BANG unlocked bootloader with twrp installed
Click to expand...
Click to collapse
Thank you Sir, that's very clear explanation. And yes I was mind donwnload mode. Ok I'll try and I'll let you know for sure! Also I had read about samsung devices with different socs ( exinos and qualcomm) and only qualcomm soc need to be unlocked bootloader. By the way I'll follow your guide and I'm pretty sure I'll got my custm recovery installed. The only thing I would ask to you is if I need to upgrade samsung's stock firmare before installing twrp recovery or to install direct the custom recovery.tar file. Tha's it! Have a nice day. Thanks again in advance!
Valalla Rising said:
Thank you Sir, that's very clear explanation. And yes I was mind donwnload mode. Ok I'll try and I'll let you know for sure! Also I had read about samsung devices with different socs ( exinos and qualcomm) and only qualcomm soc need to be unlocked bootloader. By the way I'll follow your guide and I'm pretty sure I'll got my custm recovery installed. The only thing I would ask to you is if I need to upgrade samsung's stock firmare before installing twrp recovery or to install direct the custom recovery.tar file. Tha's it! Have a nice day. Thanks again in advance!
Click to expand...
Click to collapse
Upgrading to LATEST firmware will ensure you stability
i had a galaxy j5 model j5008 CHN, but i can not enable OEM unlock. Because there is not OEM unlock checkbox in my phone Settings, maybe the OEM unlock checkbox is hidden by the OEM manufacturer. i want help.
Note-
Applicable for Windows 7, Windows 8 and Windows 10
Similar steps are applicable for EMUI 4.X as well but TWRP file will change.
Hello Fellow Members,
Did not find any post mentioning rooting for Honor 8 SMART and got requests via PM and on FB to add it for EMUI 5. If there are any, let me know and I will take down this thread. I will just simplify the steps so that any new users can do this without any problem and without any prior experience to rooting, it may be long but will be the simple enough for all the users.
Prerequisites-
Enable the developer option in settings-
Go to Settings--> About Phone-->Tab build number 7 times to enable this setting.
Go back in setting page, just above system update, you will see a new menu as -Developer Options
Scroll for the debugging section and enable the USB Debugging
You will be prompted for the confirmation with RSA key, just accept it.
Enable OEM Unlock in Developer Options (just above the USB debugging option) – Most probably this option will not be there on EMUI 5.0 (only few have seen on EMUI but it was there on EMUI 4.1 for all but rarely on EMUI 5.0 or may be because I have used dload most of the time which grayed out this)
Please note down you build number, this may become handy in case something goes wrong to restore your phone via DLOAD. In Settings- About phone- Build Number
Installation of required Drivers.
Connect your phone to PC and install Hi Suite on PC and it will additionally install all the necessary drivers to PC and HiSUite on Mobile.
Download and Install ADB from Link
Accept all the prompts and install ADB drive system wise.
Once installation is completed, if default options are chosen, it will be under C:\adb
Downloading the necessary files.
Download TWRP from Link Thanks to @OldDroid for his Original Thread . Rest of the contributor and credit in original thread by OldDroid.
Move the downloaded file under C:\adb or wherever you have installed the ADB.
Download the SuperSU file from this Link and put it in SD card or keep handy on PC so that you can copy to internal memory later.
Get the unlock as mentioned in this thread
Actual Procedure
Unlocking the bootloader-
Backup all your data as unlocking the bootloader will reset the device and all your data will be erased.
On windows machine, go to folder C:\adb or wherever you installed the adb drivers.
Press shift+right click together and select Open command prompt here
Run - adb reboot bootloader (this command may prompt for acceptance of RSA key if not already accepted)
This will boot the phone into bootloader mode.
Run - fastboot oem unlock <16 digit unlock code- Put your actual code you obtained from Huawei site > (This step will unlock the bootloader and will erase all your data)
Phone will restart automatically.
Installing TWRP
Once on the system, open the PowerShell or command prompt again in ADB folder (can use the previous instance as well)
Run - adb reboot bootloader
Once in bootloader, Run - fastboot flash recovery twrp-3.1.1-0-venus.img (This will install the TWRP recovery for EMUI 5.0 on your phone)
Once done with the flashing the TWRP, Run - fastboot reboot
Rooting
Once booted to system, open the PowerShell or command prompt in ADB folder (can use the previous instance as well)
Run - adb reboot recovery
And your phone will boot into the TWRP recovery.
Copy the SuperU file downloaded to SD card or Internal memory.
Install the SuperSU zip.
Reboot and enjoy.
Happy Flashing.
I have try,but it doesn't work.
Snoopys Woodstock said:
I have try,but it doesn't work.
Click to expand...
Click to collapse
One of the user, imssk has tried this and worked fine for him without any problem. What is the error you are getting
Cool thanks. Different question: Why honor does not provide monthly or 3 months security updates.Very disappointed with them. I know we are not getting Oreo update but atleast provide security update in at least three months.
please help me sir im aniket from india ive rooted the phone accordingly but i made a mistake while formatting from twrp and lost encryption and then i formatted the whole os and as downloaded the stock firmware from official consumer huawei site the rom doest gets flashed i even tried flashing by extracting the update.app file but still the system file wont flash and fails every time please help me as sson as possible
Aniket02141 said:
please help me sir im aniket from india ive rooted the phone accordingly but i made a mistake while formatting from twrp and lost encryption and then i formatted the whole os and as downloaded the stock firmware from official consumer huawei site the rom doest gets flashed i even tried flashing by extracting the update.app file but still the system file wont flash and fails every time please help me as sson as possible
Click to expand...
Click to collapse
Flashing via twrp or dload method?
Custom ROMs?
Hello I have been searching for custom ROMs for ven-l22 but haven't found any. Would you know of any? Thanks.
Babakkardan said:
Hello I have been searching for custom ROMs for ven-l22 but haven't found any. Would you know of any? Thanks.
Click to expand...
Click to collapse
Use p9 lite ROM. It will work
Thanks that is very useful.
Is USB otg working on this phone?
Babakkardan said:
Thanks that is very useful.
Is USB otg working on this phone?
Click to expand...
Click to collapse
With custom ROM and root, yes.
Huawei disabled the site.
I sent them email and they refused to give me a key I am their customer.I paid them.How can I unlock it?
VFR99 said:
I sent them email and they refused to give me a key I am their customer.I paid them.How can I unlock it?
Click to expand...
Click to collapse
Via paid services like dc unlocker, Chimera tool, HCU client etc.
I don't want to pay
shashank1320 said:
Via paid services like dc unlocker, Chimera tool, HCU client etc.
Click to expand...
Click to collapse
It was free now why should I pay?Come on they are a dumb company.
VFR99 said:
It was free now why should I pay?Come on they are a dumb company.
Click to expand...
Click to collapse
Well thats something i cant comment
They have stopped providing the code long back
shashank1320 said:
Well thats something i cant comment
They have stopped providing the code long back
Click to expand...
Click to collapse
It's not your fault
Hi XDA
I'm looking for stock Rom for my Huawei P Smart FIG-LX1.
Huawei don't propose it for this moment on his site and I can't find it anywhere.
If someone could extract it from his phone...
Another solution should be a great custom Rom but there's nothing at this time.
Thanks for the help
Hi,
For the moment I have nothing anymore on my phone...after installing custom rom, I tried to come back to stock, and unlock the phone...
And recovery by wifi or Hisense doesn't work...
Thank you all
feuillearouler said:
Hi,
For the moment I have nothing anymore on my phone...after installing custom rom, I tried to come back to stock, and unlock the phone...
And recovery by wifi or Hisense doesn't work...
Thank you all
Click to expand...
Click to collapse
Use FirmwareFinder to download the correct firmware for your device.
flibblesan said:
Use FirmwareFinder to download the correct firmware for your device.
Click to expand...
Click to collapse
Hi,
Thank you, I will look for
flibblesan said:
Use FirmwareFinder to download the correct firmware for your device.
Click to expand...
Click to collapse
FIG-LX1 is not in the list...
feuillearouler said:
FIG-LX1 is not in the list...
Click to expand...
Click to collapse
Use Common base tab, Model for find enter FIG-LX1 then click Find.
Or download from http://pro-teammt.ru/firmware-database/?firmware_model=fig-lx1&firmware_page=0
flibblesan said:
Use Common base tab, Model for find enter FIG-LX1 then click Find.
Or download from http://pro-teammt.ru/firmware-database/?firmware_model=fig-lx1&firmware_page=0
Click to expand...
Click to collapse
Thank you, I am downloading all fig-lx1 full OTA...
For the moment, I have no rom in my phone anymore...made a big mistake by relock bootloader
So I can't unlock anymore to install custom rom
I'm trying, I'm trying...
flibblesan said:
Use Common base tab, Model for find enter FIG-LX1 then click Find.
Or download from http://pro-teammt.ru/firmware-database/?firmware_model=fig-lx1&firmware_page=0
Click to expand...
Click to collapse
Hi,
Well, I have downloaded about 15 or more versions of fig-lx1... none can be installed... ever and ever same message : failled !
I tried fig-l11 and fig-l31, same issue...
Is ther another way to force flash (another than folder "dload" with update.app inside in sdcard) ?
thank you
feuillearouler said:
Hi,
Well, I have downloaded about 15 or more versions of fig-lx1... none can be installed... ever and ever same message : failled !
I tried fig-l11 and fig-l31, same issue...
Is ther another way to force flash (another than folder "dload" with update.app inside in sdcard) ?
thank you
Click to expand...
Click to collapse
Install TWRP then use this https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
flibblesan said:
Install TWRP then use this https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
Click to expand...
Click to collapse
I can't install TWRP as bootloader is locked and I can't unlock it (I have no system installed so, can reach developper options and unlock OEM)...
Every time I'm trying to unclok bootloader, I have
Code:
(bootloader) Necessary to unlock FRP!
(bootloader) Navigate to Developer options, and enable "OEM unlock"!
FAILED (remote: Command not allowed)
finished. total time: 0.031s
Only things I have is bootloader locked and stock recovery....
feuillearouler said:
I can't install TWRP as bootloader is locked and I can't unlock it (I have no system installed so, can reach developper options and unlock OEM)...
Every time I'm trying to unclok bootloader, I have
Code:
(bootloader) Necessary to unlock FRP!
(bootloader) Navigate to Developer options, and enable "OEM unlock"!
FAILED (remote: Command not allowed)
finished. total time: 0.031s
Only things I have is bootloader locked and stock recovery....
Click to expand...
Click to collapse
Ah you have big problem then, sorry. There is no solution for unlocking FRP unless you have stock rom available or have flashed TWRP.
Boot your phone into eRecovery and perform the firmware recovery.
ChinHon said:
Boot your phone into eRecovery and perform the firmware recovery.
Click to expand...
Click to collapse
Hi
Already tried .. can't download it into recovery...I have a error message
Try this installation:
https://mobiletech360.co/huawei-p-smart-figo-l31-stock-firmware-rom-android-8-oreo/
ChinHon said:
Try this installation:
https://mobiletech360.co/huawei-p-smart-figo-l31-stock-firmware-rom-android-8-oreo/
Click to expand...
Click to collapse
Well, I have tried 3 different rom...unsuccessfully...
Don't really know what to do now....
Try it with the FunkyHuawei Tool for restoring the firmware. Or HiSuite DNS.
ChinHon said:
Try it with the FunkyHuawei Tool for restoring the firmware. Or HiSuite DNS.
Click to expand...
Click to collapse
Thank you very much for trying to help me...I will try this....
ChinHon said:
Try it with the FunkyHuawei Tool for restoring the firmware. Or HiSuite DNS.
Click to expand...
Click to collapse
I can't use Hisuite DNS as I have no rom installed, I can't click on Update system...
I looked FunkyHuawei...very expansive for this phone model... EDIT : and no any firmware for fig-lx1....
Thank anymore
Study the instructions and the program settings. It works with HiSuite DNS. In conjunction with Firmwarefinder for PC, the appropriate router configuration and the eRecovery.
ChinHon said:
Study the instructions and the program settings. It works with HiSuite DNS. In conjunction with Firmwarefinder for PC, the appropriate router configuration and the eRecovery.
Click to expand...
Click to collapse
Ok, I will try tomorrow...it is too late in France
Will tell you
See u
hi
i use a j5 Prime sm-G570Y on andriod Oreo
i can't find the proper root files to flash using Odin as most of them are either not for andriod Oreo or for the g570F, not Y
i've tried using Odin to root my phone before, but all that happend was that my phone got bricked so i'm not really willing to try and root again unless i know that the root file is specifically for my exact phone model and Android version
if someone has any info on root files for my phone it would be of gr8 help
oso im new here and i dk technical terms sozz
Do you have twrp?
If yes just flash magisk.
garylawwd said:
Do you have twrp?
If yes just flash magisk.
Click to expand...
Click to collapse
i dont have it installed
i tried to install it but i get stuck on <waiting for devices>
plus i've also updated drivers for my phone (j5 prime)
im really really confused right now, help would be apprectiated
leguy said:
i dont have it installed
i tried to install it but i get stuck on <waiting for devices>
plus i've also updated drivers for my phone (j5 prime)
im really really confused right now, help would be apprectiated
Click to expand...
Click to collapse
You got stuck on waiting for devices because you didnt enable OEM unlocking and USB debugging from developer options in settings.
You need to go to settings - about device - click on the build number 7 times and you unlock developer options.
garylawwd said:
You got stuck on waiting for devices because you didnt enable OEM unlocking and USB debugging from developer options in settings.
You need to go to settings - about device - click on the build number 7 times and you unlock developer options.
Click to expand...
Click to collapse
I enabled Usb debugging and OEM unlock before i tried it
so what i did was open up cmd,
type cd <place where SDK files are>
type adb devices
type adb reboot bootloader
at this point the phone enters download mode
then i type fastboot flash recovery twrp.img (i renamed the twrp file for my phone to twrp)
then the waiting for device thing appears
i tried rebooting and using fastboot oem unlock instead, but it still said waiting for device
Check if CFAutoRoot is available for your device... If not available you can create from there