Hi Guys i just found out a solution for installing gapps in EUI Roms(Chinise & Indian) and Preventing Google Play services Force Closed Message.
Checked on EUI Versions 5.9.23s & 5.9.26s. Might as well work on earlier versions of EUI
Step 1 : Flash your EUI ROM.
Step 2 : Boot into EUI ROM. Skip / Login to EUI. Complete Initial Setup For the EUI ROM.
Step 3 : Install Google MM Installer for MIUI from here : https://drive.google.com/open?id=0B0zyTbM6grv4em1YelBQUzVzTGs or from the original thread here : http://en.miui.com/thread-205625-1-1.html
Step 4 : Launch app and install all google Framework Apps and playstore from this installer App.
Step 5 : Launch Play Store , Login through Google Account. You will get "Google Play services" stopped error message at this step. Don't panic about it.
Step 6 : After Successfully Logging into Play store, Don't try and install anything from play store yet.
Step 7 : Reboot to recovery, Install open Gapps Pico(You may try other versions, pico worked with me) version from here : http://opengapps.org/
Step 8 : Wipe Cache & Dalvik. Reboot. Done.
Step 9 : Launch Play Store and install apps of your choice.
Thanks, and give a Thanks if its helpful.
question
Hello and thanks, I just have one question, how can I do a wipe cache and dalvik if I have the original recovery and it only has two options, update and clear data?
diosshu said:
Hello and thanks, I just have one question, how can I do a wipe cache and dalvik if I have the original recovery and it only has two options, update and clear data?
Click to expand...
Click to collapse
you need custom recovery i suppose. be sure you have unlocked bootloader to flash custom recovery.
I have installed TWRP and try this guide and it works around 97% because play store crashes sometimes, but as I already have a custom recovery I am testing out Resurrection remix and it works very good.
Now I am only wondering about where can I find the letv 1s notification sounds.
diosshu said:
I have installed TWRP and try this guide and it works around 97% because play store crashes sometimes, but as I already have a custom recovery I am testing out Resurrection remix and it works very good.
Now I am only wondering about where can I find the letv 1s notification sounds.
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B0zyTbM6grv4R0FiTzd2aE5nMGc/view?usp=drivesdk
There you go. It's just the extracted audio files, don't flash it, just use them as audio files
@purna199
Thanks so much for the info,
Was really doing my head in all day.
with step 5 i was trying to log in and it would not let me, so in the end I just when into recovery and flash gapps. and this work for me.
Thanks again!
Related
Taken in parts from information provided by Gluk41 on the russian 4pda forum, here is a simple guide how to install the latest Chinese Marshmallow (beta) on your Honor 4c / GPlay mini:
Be aware that:
all userdata will be erased, TWRP recovery, gapps and root have to be redone
system partition is almost full, pico opengapps barely fit (better to remove some apps)
this is a developer beta version for the chinese market (but has all languages included)
Downloads & Installation
Flash TWRP from here and backup whatever you need
Download the complete 6.4.16 ROM here and copy the dload folder to SD card
Flash the region information for UL00 umicom / cn from TWRP
Reboot and all 3 buttons pressed until the installation starts
--
Update: For your convenience I put all 3 files in the Mega Folder
--
The 3 button method uses its own built-in recovery and can be used with TWRP installed! All 3 buttons might have to be pressed for quite some time (20sec or even longer) until it starts. The ROM installs fine with the correct region information, otherwise it will fail around 5%.
TWRP & root
TWRP will be replaced by the standard recovery and needs to be re-flashed. For Root follow the MM Root thread by inshaalmirza. I had to flash the current SuperSU 2.7.1 beta twice until it worked.
The pre-installed app 'Phone Manager' seems to block SuperSU from working correctly. You might not see the root request if you start an app that requires root. A work-around is, to manually start SuperSU before or after starting the app that requires root. The, request eventually will pop up after a few seconds. Either uninstall the Phone Manager or configure it not to block SuperSU.
Google Apps
This ROM comes without Google Apps and a lot of chinese apps pre-installed. The system partition is almost full. Therefore it is recommended to remove some of the chinese apps before flashing Gapps. Use the openGapps arm64 6.0 pico version, others will not fit unless you remove a lot of the pre-installed apps. Flash the Gapps via TWRP, reboot and let the phone settle for a few minutes. After unlocking, you will get a black screen. Reboot in TWRP and wipe all user data. After the next reboot, setup wizard should start and everything should be fine.
Enjoy but be aware, it is just a developer beta version.
In China the latest update is 6.2.1,not 6.4.16. I wonder where is 6.4.16 from.Sorry for my bad English.
来自搭载Android 2.3 GingerBread的华为Y220-T10
how to go back from china marshmallow firmare to india firmware marshmallow.
Do I need to be bootloader unlocked before installing this ROM?
Inviato dal mio GT-N8000 utilizzando Tapatalk
Yes Bootloader should be unlock. But battery is poor
help
i cacant download thats rom,do u have another link?
JobSup said:
Taken in parts from information provided by Gluk41 on the russian 4pda forum, here is a simple guide how to install the latest Chinese Marshmallow (beta) on your Honor 4c / GPlay mini:
Be aware that:
all userdata will be erased, TWRP recovery, gapps and root have to be redone
system partition is almost full, pico opengapps barely fit (better to remove some apps)
this is a developer beta version for the chinese market (but has all languages included)
Downloads & Installation
Flash TWRP from here and backup whatever you need
Download the complete 6.4.16 ROM here and copy the dload folder to SD card
Flash the region information for UL00 umicom / cn from TWRP
Reboot and all 3 buttons pressed until the installation starts
--
Update: For your convenience I put all 3 files in the Mega Folder
--
The 3 button method uses its own built-in recovery and can be used with TWRP installed! All 3 buttons might have to be pressed for quite some time (20sec or even longer) until it starts. The ROM installs fine with the correct region information, otherwise it will fail around 5%.
TWRP & root
TWRP will be replaced by the standard recovery and needs to be re-flashed. For Root follow the MM Root thread by inshaalmirza. I had to flash the current SuperSU 2.7.1 beta twice until it worked.
The pre-installed app 'Phone Manager' seems to block SuperSU from working correctly. You might not see the root request if you start an app that requires root. A work-around is, to manually start SuperSU before or after starting the app that requires root. The, request eventually will pop up after a few seconds. Either uninstall the Phone Manager or configure it not to block SuperSU.
Google Apps
This ROM comes without Google Apps and a lot of chinese apps pre-installed. The system partition is almost full. Therefore it is recommended to remove some of the chinese apps before flashing Gapps. Use the openGapps arm64 6.0 pico version, others will not fit unless you remove a lot of the pre-installed apps. Flash the Gapps via TWRP, reboot and let the phone settle for a few minutes. After unlocking, you will get a black screen. Reboot in TWRP and wipe all user data. After the next reboot, setup wizard should start and everything should be fine.
Enjoy but be aware, it is just a developer beta version.
Click to expand...
Click to collapse
Great guide ..
Sent from my KIW-L22 using Tapatalk
Thanks
jkccl9 said:
Thanks
Click to expand...
Click to collapse
Ohh
Sent from my KIW-L22 using Tapatalk
gopinaidu77 said:
Ohh
Click to expand...
Click to collapse
[Tools, Tips & Tutorials] Installing & Updating Weekly China Dev ROM - Keep Root, Gapps, TWRP
I had encountered many problems while flashing the latest weekly ROMS and will like to share what worked for me.
Right now, there is no Global Developer ROM for Redmi 3, thus we will have to survive with China Developer ROM (which is better).
What is the difference between Global Developer ROM and China Developer ROM?
The difference is the China Developer ROM has no GApps (but we can flash it easily), but you get the quickest Weekly Updates (every Friday, around 0200 GMT), and it also comes in English (only English, Chinese Simplified, Chinese Traditional available). The China Developer ROM also includes many Chinese bloatware which you can freeze using ROM Toolbox Lite or others.
Will I be able to get OTA after rooting and having TWRP Recovery?
No, you will be able to download and your phone will try to install it.... unsuccessfully and will request for you to download the full ROM.
After updating is root still available?
No, you will have to re-root.
I thought the China Developer ROM have a root option out of the box?
Yes, there is a root option under the Security -> Permissions, but it is a limited root. Adaway will not work. You can't freeze some system apps as well. It is a useless root.
STEP 1 - Install China Developer ROM
a. You need to be on China Developer ROM first. If you are on Global Stable ROM then you need to install China ROM and then you can install China Developer ROM.
b. Google "redmi 3 china developer rom", and choose the first link.
Download the China Stable ROM. Install it using Updater app in your Redmi. Press the 3 dots on the top right to choose the file you downloaded.
c. After installing that, go back download the latest Beta ROM (updated weekly) and install it.
d. Now you will be in China Developer ROM.
STEP 2 - Unlock Bootloader
a. Go to the MIUI Unlock site.
b. Login using facebook (easier)
c. You will be asked for your phone number which Xiaomi will send a SMS with a code for verification.
d. You will be asked for a reason to unlock bootloader. Just type something like "Phone bricked and stuck in bootloop."
e. After a few days (it took 2 days in my case), Xiaomi will send you a SMS letting you know that you have been approved.
f. Install MiFlash Unlock
g. Login to your Mi account on your phone. (Mi Account app)
h. Go into Fastboot mode. (Power off, then hold Volume Down + Power till you enter Fastboot mode).
i. Connect phone to PC. Open MiFlash Unlock, login, and press unlock.
j. After 10 seconds, your bootloader is unlocked.
STEP 3 - Install TWRP (Cofface Edition)
a. You can install the official TWRP but it will require some editing of some files. There is a modded TWRP which has made it easier without any editing. Search for "REDMI 3 TWRP Cofface" on the MIUI forum
b. It comes with a *.bat file which means once you open it, the script will install and reboot the recovery automatically.
c. Boot into Fastboot mode, connect to PC, and click the *.bat file. After it works its magic you will be rebooted into TWRP, in Chinese.
d. Swipe right (warning that you will have the power to edit system files).
e. To change language, 3rd button down, right row.
f. When you wish to exit, swipe the big button on the bottom to disable recovery going back to stock, thus keeping TWRP.
STEP 4 - Install Gapps
a. There's two methods. Flashing Open GApps in TWRP or installing an app called Google Installer (download from MIUI forum) which will download the required files and install it. Installing with the app, I encountered many Play Store error (like unable to connect to Play Store). I recommend flashing the first method.
b. Download from GAPPS official siteChoose Platform: ARM64, Android: 5.1. The Pico variant will work fine.
c. Power off. Hold Volume Up + Power Button. You will get into a menu with Chinese words. Press the button that has the word "recovery".
d. Flash Gapps, and remember to Wipe Cache afterwards.
e. Restart and you will have Play Store etc. on your phone.
STEP 5 - Root (with SuperSU)
a. Download the zip file from the official Chainfire site.
b. Boot into TWRP
c. Flash SuperSU, Wipe cache, Reboot
d. Rooted
STEP 6 - Updating ROM Weekly
a. Download the latest beta ROM. You need the full ROM (which is typically 900MB and above).
b. Go to TWRP, flash the ROM, wipe cache, flash Gapps (or you won't be able to connect to Play Store), wipe cache, flash SuperSU (because flashing the ROM removes root), wipe cache. Reboot.
Hi, I've searched, can't find straight answer on this. I am running Silesh's Invicata Rom, works great.
I am interested in running Magisk instead of embedded root, I see where other's say it works, but don't see any specific instructions on getting it up and running.
(Wasn't really interested in this until I found out Netflix soon won't work with root/unlocked bootloader)
bovineyard said:
Hi, I've searched, can't find straight answer on this. I am running Silesh's Invicata Rom, works great.
I am interested in running Magisk instead of embedded root, I see where other's say it works, but don't see any specific instructions on getting it up and running.
(Wasn't really interested in this until I found out Netflix soon won't work with root/unlocked bootloader)
Click to expand...
Click to collapse
Step 1: remove all the root components (sg. Supersu, kingroot whicheveru r using).
Step 2: dwnld latest magisk frm goggle play or from xda forum of magisk.
Step 3: flash magisk from recovery(custom like trwp, cwm, etc)
Step 4 : reboot device
Stel 5 : ENJOY[emoji41] [emoji41]
Sent from my Moto G4 Plus using Tapatalk
bovineyard said:
Hi, I've searched, can't find straight answer on this. I am running Silesh's Invicata Rom, works great.
I am interested in running Magisk instead of embedded root, I see where other's say it works, but don't see any specific instructions on getting it up and running.
(Wasn't really interested in this until I found out Netflix soon won't work with root/unlocked bootloader)
Click to expand...
Click to collapse
Just flash the Magisk zip in recovery.
Thanks for the answers. Invicta has built in root, so just disable on developer options? Is a data and or system wipe necessary?
bovineyard said:
Thanks for the answers. Invicta has built in root, so just disable on developer options? Is a data and or system wipe necessary?
Click to expand...
Click to collapse
No need, just flash Magisk and wipe ART cache in recovery. Ignore the built in root.
bovineyard said:
Hi, I've searched, can't find straight answer on this. I am running Silesh's Invicata Rom, works great.
I am interested in running Magisk instead of embedded root, I see where other's say it works, but don't see any specific instructions on getting it up and running.
(Wasn't really interested in this until I found out Netflix soon won't work with root/unlocked bootloader)
Click to expand...
Click to collapse
Did you try? what is the result?
I am using the same Invicta, with Magisk! Just flash the Magisk zip.. in TWRP clear cache and dalvik and then download Magisk Manager from the official thread, it is not on Play store anymore! Instakk/update the magisk manager. It will work normally...
No need to disable the Built in root, as it does not interfere. If it does, then disable and then try.!
Isit possible toinstall magisk without clearing cache and delvik ? If i do that, i will lose connectivity with my jio sim
Mewxr said:
Isit possible toinstall magisk without clearing cache and delvik ? If i do that, i will lose connectivity with my jio sim
Click to expand...
Click to collapse
If you make a clean installation it's not necessary to wipe the caches.
1. Take a backup of all apps if you want then back
2. Don't try unrooting and all cuz I never got a 100% success rate here
3. Flash Invicta os as a clean flash
4. Flash gapps
5. Flash magisk 14.0
6. Reboot.
7. Your safety net should pass
8. Go to magisk hide and hide play store.
9. Try downloading Netflix, if you can't just download APK
10. Try logging in, if it doesn't work magisk hide it. It's done.
I'm using Netflix
strongst said:
If you make a clean installation it's not necessary to wipe the caches.
Click to expand...
Click to collapse
What do you mean by a clean installation, sir?
Mewxr said:
What do you mean by a clean installation, sir?
Click to expand...
Click to collapse
A clean installation is when you don't upgrade the rom to a new version by just installing it over the old one.
Just flash magisk over the ROM installed, you won't lose anything!
If u are worried, try magisk before restoring any of your stuff!
no need to worry about inbuilt root... It doesn't affect magisk..
I have tried everything:
Installing TWRP
Installing all Updates using the update.zip method
Installing custom ROMs using TWRP
Phone keeps crashing during start or when in any app (typically Google Chrome, Browser, Games)
I currently have MIUI 9 Installed - the phone mostly doesn't get to the actual OS. If it does, it displays ANRs.
Is my CPU broken or is this a software error?
I too have same problem. No solution
udaimujai said:
I too have same problem. No solution
Click to expand...
Click to collapse
I have X626 , was having same issues .
Possible solution:
1. Unlock bootloader and install TWRP 3.0.2-0.
It's very important to make sure that you enabled "allow bootloader unlock" in developer options , before flashing twrp or rooting.
2. Install official EUI 5.9.023s stock rom
3. Wipe cache/dalvik/data (factory reset)
4. Use TWRP to install magisk v16
5. Install Xposed systemless (magisk module) and Xposed installer.
6. Install android webview from playstore
7. Install webviewgoogle module (xposed).This xposed module will force the system to use google webview instead of LeEco's default webview.
Now i am really happy with my Le S3 X626. The phone can run for a few days without rebooting or freezing , very very stable.
1. I have a G900T and am running Lineage_KLTE_userdebug 9 PPR1.180610.00970687de056 Test Keys.
2. I have developer options enabled and Root Access enabled for Apps and ADB.
3. I have downloaded open_gapps-arm-9.0-aroma-20190414.zip onto my phone.
4. I use TWRP 3.2.3-0 in recovery and attempt to install the .zip. I
5. I get the line 'Starting Aroma Installer version 2.80RC2 .... and then the phone reboots. No GAPPS text scrolling up, nothing like that. Just right back into TWRP.
Any help appreciated.
synpax said:
1. I have a G900T and am running Lineage_KLTE_userdebug 9 PPR1.180610.00970687de056 Test Keys.
2. I have developer options enabled and Root Access enabled for Apps and ADB.
3. I have downloaded open_gapps-arm-9.0-aroma-20190414.zip onto my phone.
4. I use TWRP 3.2.3-0 in recovery and attempt to install the .zip. I
5. I get the line 'Starting Aroma Installer version 2.80RC2 .... and then the phone reboots. No GAPPS text scrolling up, nothing like that. Just right back into TWRP.
Any help appreciated.
Click to expand...
Click to collapse
AFAIK aroma gapps do not play nicely with our klte version of TWRP.
Download one of the other arm-9.0 gapps packages and try again it should work fine.
I also have G900T and non aroma gapps work for me
Good luck :good:
BlueCyclone said:
AFAIK aroma gapps do not play nicely with our klte version of TWRP.
Download one of the other arm-9.0 gapps packages and try again it should work fine.
I also have G900T and non aroma gapps work for me
Good luck :good:
Click to expand...
Click to collapse
Confirmed i have also installed new rom today and gapps from aroma does not work but other ones work.