No band info avaible on Nougat for GT-i9505 - Galaxy S 4 Q&A, Help & Troubleshooting

Hi,
I switch yesterday to Nougat from the last CM13. I try many Nougat build, and i get the same problem on all, i can't get the LTE band information.
In CM13 i used tool like "LTE Discovery" to grab it, but in any nougat build i was unable, app tell me some impossible info like Band 1 (2100mhz, this band is not in used for LTE in my country) or stay on unknow band.
I try many tool like LTE Discovery and the result was the same.
Someone know why ?

Did you upgrade your modem to the latest version before switching Android versions? If your version is too old, issues like this can result. Also, when you flashed the Android 7.x ROM, did you start from scratch, i.e. wiped system, data, and internal storage, before flashing? This is pretty much required when changing from one Android version to another.

Off course, i did all of this, i also tested the last 5 modem releases with the same result.

So what happens when you use a different ROM, such as the JDC Team's AOSP?

I have test LineageOS official, unnofficial and the optimized lineage by JDC, all based on lineage. I have download the JDC AOSP but not tested yet.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Insted of the 4G logo normaly this is the band number, sometime i'm on band 1, an impossible thing because this band isn't in use in my country ^^
Also i can say i have no problem to make a phone call or send sms.
I have try to roll back to CM13 and all was working normaly.

The real test is to see if you can get onto the Internet since some carriers route calls through the 3G network. However, have you checked your APN? This sounds like a configuration issue.

Yes i have check my APN and i'm sure it's ok.
I'm sure to be in 4G for data (see the screenshot) and for call i'm also sure to be in 2G or 3G because i don't have VoLTE for the moment (but it's another problem ^^)

You're getting high speed data, which means the LTE radio is working correctly. I believe your issue is related to the hardware drivers being used in the kernel. The problem isn't with Android itself or LTE Discovery, as I installed LTE Discovery just now on my Nexus 6 which runs Android 7.x. It's still being supported and thus includes up to date drivers, and my LTE radio reported the band number. You can try a different kernel and see if that resolves your issue, but you may simply have to live without the band data.

Thanks for your answers, maybe i can report the bug somewhere ?

LineageOS I believe has a Gerrit for bug reports.

Related

Sprint Note 2 L900 Flash 4.4.4 Final - can't update PRL?

I flashed the last 4.4.4 Final L900 Note 2 Rom as I wanted a stable rom on my wifes phone so she wouldn't have any issues. I have this same rom on another sprint phone and it allows prl/profile updates.
On the Note 2 this option isn't there. it has a mobile networks, then clicking on carrier settings causes a crash and I get an error unfortunately com.android.phone stopped and thats it.
It says it is running PRL# 2407. Is that the latest PRL for this device?
As of now the data, calls, messaging all work. I just want to have prl update available. I used voice dialer and searched for APN to get access, and it shows the attached, but none selected. Perhaps selecting one would enable the network settings so it don't crash? But I don't want to select one then lose any connectivity?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I know this thread won't get much viewing probably, but hoping to find a solution, otherwise I may try cyanogen, but prefer to stick with this rom. I want to make sure she can update PRL if needed. Thanks!!!
I got on my other phone (Sprint galaxy nexus) with omnirom 4.4.4 final and it had this app (see picture). The note 2 omni doesn't have it. I may flash this apk and see if it allows prl/profile updates. Think that's safe to try?
Note2 builds for all LTE-capable devices were a unified "t0lte" build.
I'm not sure how to handle PRL updates for such unified devices, you should look around the Sprint Note 2 forums as this probably is a Sprintism that affects multiple projects.
t0lte support in Omni is pretty much dropped due to lack of a qualified maintainer with the appropriate skills to maintain a device (knows/understands both C and Java sufficiently to fix problems without just hoping CM will fix it.) It's unlikely to return for 5.0/5.1 and 4.4 won't be receiving any further fixes.
Thanks, I guess as long as her phone works with the most current prl she should be fine. I read you can always flash back to a touchwiz rom, then update the prl, then reload omni. A pain, but manageable I guess.

SIM (GSM) Not detected on CM Roms

Hi, i have tried all CM nightly 2015-09 builds in my device and sim card is never detected. If i choose Global in Mobile Networks it detects it and i can register with my network operator and can make calls but i just can't receive incoming calls. If you call my number you can hear its calling but the device does not show the incoming call so i can't answer. I also can receive/send ams and get 3g but still can't receive calls. My network mode is GSM/UMTS and i'm with Movistar in Mexico.
My software and baseband version is OD2. My device is sim unlocked and if i go back to stock or try any other TouchWiz roms like Wickd or Sac's rom i can receive calls and the sim is always detected. I have also tried with other CM based roms like blisspop, exodus, and none of them recognise my sim.
Any fix or recommendations ? Thank you.
FedeHolyGhost said:
Hi, i have tried all CM nightly 2015-09 builds in my device and sim card is never detected. If i choose Global in Mobile Networks it detects it and i can register with my network operator and can make calls but i just can't receive incoming calls. If you call my number you can hear its calling but the device does not show the incoming call so i can't answer. I also can receive/send ams and get 3g but still can't receive calls. My network mode is GSM/UMTS and i'm with Movistar in Mexico.
My software and baseband version is OD2. My device is sim unlocked and if i go back to stock or try any other TouchWiz roms like Wickd or Sac's rom i can receive calls and the sim is always detected. I have also tried with other CM based roms like blisspop, exodus, and none of them recognise my sim.
Any fix or recommendations ? Thank you.
Click to expand...
Click to collapse
Sounds like you answered your own question amigo... If you use a Touchwiz ROM it works, then why not use a Touchwiz ROM?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You must choose Global in Networks/settings, after this, dial *#*#4636#*#* and then choose on network WCDMA preferred. After that reboot. Done, it's going to be stable.

On nexus 4 7.1.1 android LTE?

Hello , in nexus 4 cm14 (android 7.1.1) working LTE if working please help my!
Danas54 said:
Hello , in nexus 4 cm14 (android 7.1.1) working LTE if working please help my!
Click to expand...
Click to collapse
I'm trying to flash different modems, but doesn't work
merafly said:
I'm trying to flash different modems, but doesn't work
Click to expand...
Click to collapse
My too... :/
I know t-mobile network on nexus 4 lte settings don't stick reverts back to hspa+ In an area I know has 4g and it switches back pretty quickly so maybe that is your issue
Sent from my iPhone using Tapatalk
Help!!!!!!!
Danas54 said:
Help!!!!!!!
Click to expand...
Click to collapse
Hello.
The Nexus 4 never officially supported LTE. Some people discovered that there was partial support in the chipset and figured out how to enable it. However it only works on a limited frequency range and you have to know if the cell sites near you have the right frequency band. I never bothered figuring it out for myself as HSDPA+ is fast enough for me and I only have a small amount of monthly data to use anyway.
You need to use older versions of the baseband/modem as the most recent ones disabled the possible LTE modes. Whether older versions of the baseband are compatible with community ROMs based on 6.0 and up I don't know. I haven't seen any discussion for a while now. Phones with good supported LTE have been common for a long time and I suspect anyone who really needed LTE has moved on.
Band 4 LTE works just fine, problem is, I think Tmo in the US is the only carrier that supports it (thankfully I am in the US and on T-mo in that case). Any ROM with a Hybrid Modem will work. I am on latest 7.1.1_r4 Nitrogen OS and is works fine: http://forum.xda-developers.com/nexus-4/development/rom-nitrogen-os-n-substratum-10-09-2016-t3459341
Make sure LTE shows as enabled: http://forum.xda-developers.com/nexus-4/general/updated-zip-one-lte-enabler-flash-one-t2358931
Hi
Good news!, in latest 7.1.1_r4 Nitrogen OS, this ROM has build.prop modified by default with LTE option enabled in mobile network menu. But this ROM has modem device only for 3G, so i flashed this file and 4G LTE it's back again on band 4!
Modem file: https://mega.nz/#!Yg8AUDQa!bjCZ52WivDwHqN1wrMNNTRRq7ElVI0Qj9VhjG50AOuE
Greetings from Chile
PD: I attach some pictures
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Found a cause and reason related to K30PRO 5G calldrop and no signal

The miui version I am using is the 12.0.8eu stable version.
And I installed all other versions (eu, eeu, global, Chinese and even developer version).
All miui12 Android 10 versions, including the current developer version, when using 5G data
Mobile phone information by pressing *#*#4636#*#* The item is set as unknown in the basic network type
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The reason is that there is no 5G (NR) in the default network item.
As a result, data is cut off or a calldrop occurs when switching between 5G and 4G.
Now, the eu developer rom is built up to miui12 android 11 (version 20.8.13).
I installed the latest developer rom on my phone. And the result?
Not seen in all miui12 android 10 versions The basic network type NR has been new added.
And there is no longer a calldrop or signal interruption when using 5G (or 4G) data.
Of course, it is not checked as Unknown.
I would like the manufacturer or ROM developer to solve this problem quickly.
Can you create an update patch that can add basic network items by simply flashing on Android 10 version using TWRP?
I want to hear the thoughts and opinions of many users.
whitemilk_kor said:
The miui version I am using is the 12.0.8eu stable version.
And I installed all other versions (eu, eeu, global, Chinese and even developer version).
All miui12 Android 10 versions, including the current developer version, when using 5G data
Mobile phone information by pressing *#*#4636#*#* The item is set as unknown in the basic network type
The reason is that there is no 5G (NR) in the default network item.
As a result, data is cut off or a calldrop occurs when switching between 5G and 4G.
Now, the eu developer rom is built up to miui12 android 11 (version 20.8.13).
I installed the latest developer rom on my phone. And the result?
Not seen in all miui12 android 10 versions The basic network type NR has been new added.
And there is no longer a calldrop or signal interruption when using 5G (or 4G) data.
Of course, it is not checked as Unknown.
I would like the manufacturer or ROM developer to solve this problem quickly.
Can you create an update patch that can add basic network items by simply flashing on Android 10 version using TWRP?
I want to hear the thoughts and opinions of many users.
Click to expand...
Click to collapse
I had the same issue on miui 11. I never investigated as thoroughly as you but when I went to 12 the issue disappeared.

(Help) need LTE Band change option in android - 12

As in android 11 i was able to access
Com.example.tmo.bandmode
Using activity launcher
And i forgot to reset the bands and updated to android 12, now i am stuck with band 1 of LTE, and now i no more have access to band change activity
Anyone can upload the com.example.tmo.bandmode apk from their android 11 build? Or a solution to change band, as i badly need it in my locality.
Without root.
Did you find any solution?
Poojan Solanki said:
Did you find any solution?
Click to expand...
Click to collapse
No, plus no is replying any suggestion
Did you find any solution now?
Network band selection no longer available
UPDATE (04/07/2022): This is the response Samsung gave about band selection being disabled. It won't be coming back it seems. Ever since I had the Note 10+ 5g, I had been able to use the band selection app to open the hidden menu which would allow me to select which bands to connect to and...
eu.community.samsung.com
this work for me
Ulfa_indo said:
Network band selection no longer available
UPDATE (04/07/2022): This is the response Samsung gave about band selection being disabled. It won't be coming back it seems. Ever since I had the Note 10+ 5g, I had been able to use the band selection app to open the hidden menu which would allow me to select which bands to connect to and...
eu.community.samsung.com
this work for me
Click to expand...
Click to collapse
thats for samsung, and required Knox, and oneplus dont have knox plus android 12 dont allow command permissions for allowing owner option in alliance x shield,
we need a working solution for oneplus android 12
till now nothing is working for changing lte band in android 12
Try rooting it and then using network signal guru to force other bands.
BeatNoMoreYT said:
Try rooting it and then using network signal guru to force other bands.
Click to expand...
Click to collapse
i dont have any use of root , and rooting just to change band not feel like doing it.
my point was we were able to change band in android 11 without root
so finding or is their a way to change it in android 12 without root
the band change app/activities are locked and not able to launch them in android 12 without root.
tried using activity launcher and similar apps too here is the ss
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Categories

Resources