Samsung Galaxy Note 10.1 Stock Firmware Collection
N8000XWALG9 Download (Thanks To SamMobile)
Base Firmware: N8000XWALG9 (4.0.4)
Region Europe
Country: Luxembourg
Carrier: Unbranded
Build Date: 26 July 2012
Modem: XXLGA
CSC: LUXALG3
Change List: 963637
Instructions For Flashing Firmware:
Extract the firmware
Open the included Odin
Turn off your device
Put your device into Download MODE (Home + Volume Down + Power)
Click PDA and select *.tar.md5
Then finally click START!
Instructions For Changing CSC:
Download Samsung Galaxy S / S2 CSC app from the Play Store
Open Samsung Galaxy S / S2 CSC app
Tap "Change CSC" button
Select the CSC for you Country
Tap "Install" button (Keep in mind changing CSC wipes your device)
Follow Me On Twitter:
Previous Firmwares
N8000XWALG7 Download (Thanks To SamMobile)
Base Firmware: N8000XWALG7 (4.0.4)
Region Asia
Country: United Arab Emirates
Carrier: Unbranded
Build Date: 20 July 2012
Modem: XXLGA
CSC: OJVALG4
Change List: 919244
N8000XXALGA Download (Thanks To SamMobile)
Base Firmware: N8000XXALGA (4.0.4)
Region Europe
Country: Poland
Carrier: Unbranded
Build Date: 18 July 2012
Modem: XXLGA
CSC: OXXALG5
Change List: 861995
==RESERVED==
in Germany i also have the xxalga Firmware
Gesendet von meinem GT-N8000 mit Tapatalk 2
Notw 10.1 WiFi
Does anyone have the official software for the Note 10.1?
I flashed the build on my WiFi N8010 from SamMobile but it's a retail demo version and is missing the lock screen, security settings etc.
Cheers
I tried the Luxembourg ROM and its got a ton of bloatware. No problem if you're rooted and can do some clean-up but a waste of space if you're not. Also, the EU Media Hub won't work from the U.S. and can't be spoofed. The TTT ROM is the cleanest.
Hello forum!
limestar: you can remove the retail/demo app (the video that starts right after your screen goes dim) by rooting the device, setting RW permissions to /system/app and removing the first app in the /system/app list (if I remember it correctly it's first one, anyway it's easily distinguished). No need to flash it. Actually it wasn't removed for some reason after I flashed the firmware found on sammobile (I am very new to flashing). Anyway if you do this please let me know what was the package name as I have to make instructions how to remove the thing and I cannot remember the package name and can't find the name on my gadget.
Closed as per OP's request.
I bought the phone which was brand new, couple of years ago. I wanted to update it to the latest OS but was unable to do so as it says it was modified.
After extensive research online, i came to know i have to flash the stock rom using Odin. But i am unable to find the stock firmware that matches the codes.
These are the results from *#1234#
AP : N9005XXUBMI7
CP : N9005XXUBMI6
CSC : N9005OJVBMI2
I am unable to trace the stock ROM firmware. Appreciate if anyone could give the link and the instructions if possible.
EDIT: Okay i managed to download the stock ROM of 4.3 from a website and successfully flashed it. But being in 4.3 it says the phone is up to date and has no updates available when i check for new updates
minfas said:
I bought the phone which was brand new, couple of years ago. I wanted to update it to the latest OS but was unable to do so as it says it was modified.
After extensive research online, i came to know i have to flash the stock rom using Odin. But i am unable to find the stock firmware that matches the codes.
These are the results from *#1234#
AP : N9005XXUBMI7
CP : N9005XXUBMI6
CSC : N9005OJVBMI2
I am unable to trace the stock ROM firmware. Appreciate if anyone could give the link and the instructions if possible.
EDIT: Okay i managed to download the stock ROM of 4.3 from a website and successfully flashed it. But being in 4.3 it says the phone is up to date and has no updates available when i check for new updates
Click to expand...
Click to collapse
did you try looking at http://www.sammobile.com/ ??? all firmwares are there and it is updated
Ardie009 said:
did you try looking at ************* ??? all firmwares are there and it is updated
Click to expand...
Click to collapse
I downloaded the 4.3 OS and installed that matched my version. How do i go for 5.0 as it is not showing in my phone? Do i need to match the version codes as in that website the 5.0 version is not matching my phone version
Use the newest XXU* Version fitting to your home country best. In my case you would need Germany (DBT) because it was a unbranded german phone. Thus I need PDA: N9005XXUGBOK6 and CSC: N9005DBTGBOI1. Because I am NOT using stock at all anymore, I always use the newest BL and MODEM, but in your case just use the most recent Firmware which fits your origin and provider.
emuandco said:
Use the newest XXU* Version fitting to your home country best. In my case you would need Germany (DBT) because it was a unbranded german phone. Thus I need PDA: N9005XXUGBOK6 and CSC: N9005DBTGBOI1. Because I am NOT using stock at all anymore, I always use the newest BL and MODEM, but in your case just use the most recent Firmware which fits your origin and provider.
Click to expand...
Click to collapse
I am not an expert in these flashing. Can you help me out in this. These are the things i found for my country sammobile.com/firmwares/database/SM-N9005/SLK/
My phone states are
AP : N9005XXUBMI7
CP : N9005XXUBMI6
CSC : N9005OJVBMI2
minfas said:
I am not an expert in these flashing. Can you help me out in this. These are the things i found for my country sammobile.com/firmwares/database/SM-N9005/SLK/
My phone states are
AP : N9005XXUBMI7
CP : N9005XXUBMI6
CSC : N9005OJVBMI2
Click to expand...
Click to collapse
Seems like Sri Lanka has a N9005ODD* CSC in recent FWs, but you have a N9005OJV* one used in South Africa and Morocco currently.
So I would try these:
http://www.sammobile.com/firmwares/download/62194/N9005XXUGBOK9_N9005OJVGBOI1_XFM (South Africa)
http://www.sammobile.com/firmwares/download/61958/N9005XXUGBOK9_N9005OJVGBOI1_MWD (Morocco)
No guarantee though, but in theory it's not interesting at all which FW you use. At least I already used DBT ones and Nordic Country NEE ones and had no problems in the past.
So you could try http://www.sammobile.com/firmwares/download/62526/N9005XXUGBOK6_N9005ODDGBOJ1_SLK (Sri Lanka) too. But as I said, FW update always is a risk and if you don't know how to fix stuff, it can be a nice activity for a whole weekend to fix stuff again.
If you want to be more sure and secure... load https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo and send the stuff shown in "General", "CSC-Code", "Firmware" and "Android" in here. Most interesting is the "Active CSC Code"
emuandco said:
Seems like Sri Lanka has a N9005ODD* CSC in recent FWs, but you have a N9005OJV* one used in South Africa and Morocco currently.
So I would try these:
No guarantee though, but in theory it's not interesting at all which FW you use. At least I already used DBT ones and Nordic Country NEE ones and had no problems in the past.
So you could try sammobile.com/firmwares/download/62526/N9005XXUGBOK6_N9005ODDGBOJ1_SLK (Sri Lanka) too. But as I said, FW update always is a risk and if you don't know how to fix stuff, it can be a nice activity for a whole weekend to fix stuff again.
If you want to be more sure and secure... load [play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo and send the stuff shown in "General", "CSC-Code", "Firmware" and "Android" in here. Most interesting is the "Active CSC Code"
Click to expand...
Click to collapse
Manufacturer / Brand
Samsung
Model - SM-N9005
Device type - hltte
Product name - hltexx
Country of origin - vietnam
CSC Code
Product code - SM-N90052WESFR
Original CSC code - SFR
Firmware's CSC code - XSI
Active CSC code - SFR / XSI
Available CSC codes - KSA, SFM, XSI
CSC Country - UAE / AE
Firmware
Bootloader ver. - N9005XXUBMI7
PDA Ver. - N9005XXUBMI7
CSC Ver. - N9005OJVBMI2
Baseband ver. - N9005XXUBMI6
Kernal Ver. - 3.4.0 - 1628120
[email protected]#1
32-bit
Java Virtual machine - Dalvik 1.6.0
Android
Root existence - No
Android ver. - 4.3
Build num. - JSS15J.N9005XXUBMI7
Build Fingerprint - samsung/hltexx/hlte:4.3/JSS15J/N9005XXUBMI7:user/release-keys
Build description - hltexx-user 4.3 JSS15J N9005XXUBMI7 release keys
Build date - Wed Sep 11 15:30:59 KST 2013
Changelist - 1628120
minfas said:
Manufacturer / Brand
Samsung
Model - SM-N9005
Device type - hltte
Product name - hltexx
Country of origin - vietnam
CSC Code
Product code - SM-N90052WESFR
Original CSC code - SFR
Firmware's CSC code - XSI
Active CSC code - SFR / XSI
Available CSC codes - KSA, SFM, XSI
CSC Country - UAE / AE
Firmware
Bootloader ver. - N9005XXUBMI7
PDA Ver. - N9005XXUBMI7
CSC Ver. - N9005OJVBMI2
Baseband ver. - N9005XXUBMI6
Kernal Ver. - 3.4.0 - 1628120
[email protected]#1
32-bit
Java Virtual machine - Dalvik 1.6.0
Android
Root existence - No
Android ver. - 4.3
Build num. - JSS15J.N9005XXUBMI7
Build Fingerprint - samsung/hltexx/hlte:4.3/JSS15J/N9005XXUBMI7:user/release-keys
Build description - hltexx-user 4.3 JSS15J N9005XXUBMI7 release keys
Build date - Wed Sep 11 15:30:59 KST 2013
Changelist - 1628120
Click to expand...
Click to collapse
Interesting... XSI? That's United Arab Emirates... well, then use that one: http://www.sammobile.com/firmwares/download/52346/N9005XXUGBOG4_N9005OJVGBOG2_XSI/ ^^
THAT is your current one then http://www.sammobile.com/firmwares/download/19509/N9005XXUBMI7_N9005OJVBMI2_XSI/
emuandco said:
Seems like Sri Lanka has a N9005ODD* CSC in recent FWs, but you have a N9005OJV* one used in South Africa and Morocco currently.
So I would try these:
sammobile.com/firmwares/download/62194/N9005XXUGBOK9_N9005OJVGBOI1_XFM[ (South Africa)
sammobile.com/firmwares/download/61958/N9005XXUGBOK9_N9005OJVGBOI1_MWD[(Morocco)
No guarantee though, but in theory it's not interesting at all which FW you use. At least I already used DBT ones and Nordic Country NEE ones and had no problems in the past.
So you could try sammobile.com/firmwares/download/62526/N9005XXUGBOK6_N9005ODDGBOJ1_SLK(Sri Lanka) too. But as I said, FW update always is a risk and if you don't know how to fix stuff, it can be a nice activity for a whole weekend to fix stuff again.
If you want to be more sure and secure... load play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo[and send the stuff shown in "General", "CSC-Code", "Firmware" and "Android" in here. Most interesting is the "Active CSC Code"
Click to expand...
Click to collapse
emuandco said:
Interesting... XSI? That's United Arab Emirates... well, then use that one: sammobile.com/firmwares/download/52346/N9005XXUGBOG4_N9005OJVGBOG2_XSI/^^
Click to expand...
Click to collapse
Isn't the different PDA version a problem?
Nope. PDA version changes from time to time. Check the firmwares for CSC XSI and you will see that they are Android version dependent. Same can be seen for any country.
emuandco said:
Nope. PDA version changes from time to time. Check the firmwares for CSC XSI and you will see that they are Android version dependent. Same can be seen for any country.
Click to expand...
Click to collapse
Thank you very much
HI,
My note 3 Was on
Country United Arab Emirates
Product code XSI
PDA N9005XXUGBOG4
CSC N9005OJVGBOG2
but when i check on OTA update it says yes update available, and it updated to this
Country South Africa (XFM)
Version Android 5.0
Product code XFM
PDA N9005XXUGBOK9
CSC N9005OJVGBOI1
i revert back to XSI firmware. then using keis i found update,
And also using KIes did the same thing.
How is it possible? both product codes are different, pleae guide me about it.
It got right firmware. Its just sammobile website issue, websites does not show firmware for XSI region, which is the same as XFM region.
Galaxy S7 & S7 Edge Stock Files ColletionUpdated: 24/05/2016
Summary:
I think it's about time we got a stock ROM collection going on here, so I'm aiming to make an attempt to create a concise list of Stock ROM's, Modem's and Bootloaders for the Galaxy S7 & S7 Edge. I'll mirror these files on my own server for fast & ad free downloads. As I can't possibly conceive acquiring all of these firmwares without help, The collection will start small and files will be added on request. I will attempt to actively maintain this page until either updates are no longer released or there is no longer a need for it to be updated.
If you would like something added to this list, or I have made a mistake somewhere in the listing, let me know by replying, PM or email @ [email protected]. I'll do my best to get the files uploaded same day or overnight.
Tools:
Odin 3.11.1 SHA-1: 93CBC3DFB9E022DF17E4F5805D72F59292A34902
Galaxy S7:
This section includes all files for the S7. Make sure you are getting the file for the correct variant. Technically I believe S7 Edge and Standard S7 roms are interchangeable, but do so at your own risk.
Firmware packages:
This section is for complete stock firmware images straight from Samsung. They include the Modem, Bootloader, System image, CSC, Etc listed.
G930FXXU1APDN (OPS Optus Australia) DOWNLOAD
Build Date: Thu, 28 Apr 2016
AP: G930FXXU1APDN
CSC: G930FOPS1APDO (OPS - Optus Australia)
Modem: G930FXXU1APDN
G930FXXU1APDN (XSA Australia Unbranded) DOWNLOAD
Build Date: Thu, 28 Apr 2016
AP: G930FXXU1APDN
CSC: G930FXSA1APDN (XSA - Australia Unbranded)
Modem: G930FXXU1APDN
G930FXXU1APD3 (BTU United Kingdom Unbranded) DOWNLOAD
Build Date: Thu, 07 Apr 2016
AP: G930FXXU1APD3
CSC: G930FOXA1APD3
Modem: G930FXXU1APD1
Modems:
This section is for modems only. Useful if you do not want to download the entire firmware package in order to simply obtain the modem.
G930FXXU1APDN - DOWNLOAD SHA-1: 7585AA66250ED54E44DC88DB424F6993B1E86911
G930FXXU1APD1 - DOWNLOAD SHA-1: 4E9FC1985A8AC9942A2F4ECDB555DD6A6B7908BA
Bootloaders:
This section is for bootloaders only. Useful if you do not want to download the entire firmware package in order to simply obtain the bootloader.
G930FXXU1APDN - DOWNLOAD SHA-1: 55D04F504A2494B8FA996E002A064058BEF7AAE0
G930FXXU1APD3 - DOWNLOAD SHA-1: 4448B5F0DB0600384ECFF019DDA6785B7A9EFA35
Galaxy S7 Edge:
This section includes all files for the S7 Edge. Make sure you are getting the file for the correct variant. Technically I believe S7 Edge and Standard S7 roms are interchangeable, but do so at your own risk.
Firmware packages:
This section is for complete stock firmware images straight from Samsung. They include the Modem, Bootloader, System image, CSC, Etc listed.
G935FXXU1APD3 (BTU United Kingdom Unbranded) DOWNLOAD
Build Date: Thu, 07 Apr 2016
AP: G935FXXU1APD3
CSC: G935FBTU1APD3 (BTU - United Kingdom Unbranded)
Modem: G935FXXU1APD1
Modems:
This section is for modems only. Useful if you do not want to download the entire firmware package in order to simply obtain the modem.
Bootloaders:
This section is for bootloaders only. Useful if you do not want to download the entire firmware package in order to simply obtain the bootloader.
This is a Work In Progress. Files will be added as they are requested ASAP. They take time to upload!
Hi, thank you!!!!Good idea!!!Great!!!
Eddiejam72 said:
Hi, thank you!!!!Good idea!!!Great!!!
Click to expand...
Click to collapse
You're most welcome!
Also, Just added:
G930FXXU1APDN DOWNLOAD
Build Date: Thu, 28 Apr 2016
AP: G930FXXU1APDN
CSC: G930FOPS1APDO (Optus Australia)
Modem: G930FXXU1APDN
Will either of these work for my 930f on at&t?
Sent from my SM-G935F using XDA-Developers mobile app
kettir said:
Will either of these work for my 930f on at&t?
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
Should work fine. Flashing the CSC file will give you Optus branding though, so I recommend not flashing it :good:
Added:
G930FXXU1APDN (XSA Australia Unbranded) DOWNLOAD
Build Date: Thu, 28 Apr 2016
AP: G930FXXU1APDN
CSC: G930FXSA1APDN (XSA - Australia Unbranded)
Modem: G930FXXU1APDN
Here you go, The link to stock 6.0.1 firmware for SM-930FD India version
https://drive.google.com/open?id=0B03oHVHHwFHlbFVnMHJ1YUdZZjQ
Version: INS_G930FXXU1APD1
Below are direct links to AP, BL, CP, CSC and PIT files:
{Reserved: Yet Uploading}
After a long time I am coming to XDA Forum and the only reason is my new samsung galaxy S7.
Thank you.
harshang2007 said:
https://drive.google.com/open?id=0B03oHVHHwFHlbFVnMHJ1YUdZZjQ
Version: INS_G930FXXU1APD1
Below are direct links to AP, BL, CP, CSC and PIT files:
{Reserved: Yet Uploading}
After a long time I am coming to XDA Forum and the only reason is my new samsung galaxy S7.
Thank you.
Click to expand...
Click to collapse
Thanks, I'll mirror it and add to the OP once I check it
Added for S7:
G930FXXU1APD3 (BTU United Kingdom Unbranded) DOWNLOAD
Build Date: Thu, 07 Apr 2016
AP: G930FXXU1APD3
CSC: G930FOXA1APD3
Modem: G930FXXU1APD1
MODEM: G930FXXU1APD1 - DOWNLOAD SHA-1: 4E9FC1985A8AC9942A2F4ECDB555DD6A6B7908BA
For S7E:
G935FXXU1APD3 (BTU United Kingdom Unbranded) DOWNLOAD
Build Date: Thu, 07 Apr 2016
AP: G935FXXU1APD3
CSC: G935FBTU1APD3 (BTU - United Kingdom Unbranded)
Modem: G935FXXU1APD1
kaise123 said:
Should work fine. Flashing the CSC file will give you Optus branding though, so I recommend not flashing it :good:
Click to expand...
Click to collapse
OK. So I could unzip the contents of the Australia XDA unbranded, then use Flashfire to flash the AP, BL, and CP files, and leave out the CSC and HOME_CSC files, and I would be fine? (I'm still using AT&T USA with my g930f.)
UPDATE: I flashed the XSA unbranded, and it seems to be working fine. I did a dirty flash over the Superman ROM and all my data etc is still there. I didn't flash the modem file, and I can still make calls and wifi seems to be working. I don't see a symbol for either LTE or 4G but that might be my location so we'll see what happens there.
UPDATE 2: 4G/LTE showed up, no problem. Xposed is installed and working as well as TWRP.
New question: my baseband and bootloader are still g930fxxu1apb4. They seem to be working OK. I wonder if it would make a difference to flash the updated bootloader and/or baseband? Anyone know?
kettir said:
New question: my baseband and bootloader are still g930fxxu1apb4. They seem to be working OK. I wonder if it would make a difference to flash the updated bootloader and/or baseband? Anyone know?
Click to expand...
Click to collapse
The only real way to find out is to flash it and see. Different people have different experiences with each modem. As for the bootloader, if you are working fine without it, don't flash it. It's not necessary.
kaise123 said:
The only real way to find out is to flash it and see. Different people have different experiences with each modem. As for the bootloader, if you are working fine without it, don't flash it. It's not necessary.
Click to expand...
Click to collapse
Ok....it didn't like that. I'm going to have to find a modem file that works for USA now, I guess. Recommendations would be welcome.
kettir said:
Ok....it didn't like that. I'm going to have to find a modem file that works for USA now, I guess. Recommendations would be welcome.
Click to expand...
Click to collapse
Are you flashing it with Odin? I believe you can only flash Modem files via Odion, not FlashFire/Similar.
kettir said:
Ok....it didn't like that. I'm going to have to find a modem file that works for USA now, I guess. Recommendations would be welcome.
Click to expand...
Click to collapse
I'm in the USA also and the APD1 modem gives me best signal, I've tried most of the updated modems but signal gets worse so I always go back to APD1.
Sent from the silver bullet 930F Running Superman Rom
My CSC code says XSG which is United Arab Emirates, i can still flash it with the UK unbranded or any country firmware as long as it's for 930F? ? All I need is to flash the AP file in download mode using ODIN right? Out of the box international model has unlocked bootloader? Thank you!
NVM it worked, I installed the UK unbranded firmware.
Can someone post the list of languages included in unbranded UK?
Question on S4 I could Change My Uk Modem for the Brazil one. This was very handy for when living in Brazil. Is this still possible with S7 edge?
Sent from my GT-I9505G using XDA Premium HD app
Latest Canadian compatible modems, flash with CP, auto reboot off;
Sept
https://mega.nz/#!GcQk1SwR!U4jdzOXR5NqySRnaU-C6CDP4KIStGKmgTp3T3yK5iFY
July
https://mega.nz/#!HApVUZzZ!lRoU0FoADWfTPWdZOpeGZu1E38v2FYEBKjZeR6SdJ4Q
Hi everybody, it happens that a friend of mine brought to me an sm-g935x demo unit that has been flashed with g935fd firmware, and it works perfectly but it has no signal, no imei, no 3g, no nothing realted to modem, so I need if someone of you would please help me with a g935X modem file please, I really need it.