Announcement:
Code:
[LIST]
[B]V1.6 is now available[/B]
[/LIST]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Resurrection Remix 5.8.5 FINAL Zormax [OPTIMIZED]Lenovo A7010(A7010a48)
Code:
#include
/*
* Your warranty is now void.
* And other random stuff no-one reads.
*/
Heres the official thread of the ROM
http://lenovo-forums.ru/topic/23481...mix-583-android-71-custom-rom/#comment-549294
----------------------------
?Version 1.6 Final Download Link
?Alternative Link
By Helton Vezzoni (G+)
?GDrive
?https://drive.google.com/file/d/0B5KCs6JXlcE7b05ZZVVFRFQtNk0/view?usp=sharing
-----------------------------
If you want to flash this, just go to link given in top to read instruction, flashing procedures is not be like in mohan's roms and anything you try. Better to visit official lenovo ru link for more information.
[*]Flashing RROS v1.1UP rom (recommended boot2sd.img and System.img)
[*]Tick flash zip, flash system to system image, bootsd to boot
[*]After that, flaash recoveryN1
[*]target partition to recovery then reboot to recovery
[*]Flash addons gapps or download mini gapps, if you want root flash su
[*]reboot to system
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
Upgrade from new build? Here
* Flash system to system img
* Flash gapps (newer version) and root (magisk or su)
* If you have mods on last build, flash it (Dolby, Magisk, Song Framewrk etc.)
* Wipe cache and dalvik
* Reboot
* Done
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Note!
[*]Dont go back from any old twrp, this might be removed your existing twrp recovery, stay on 3.1.1 by sevenmaxs
[*]If you want to go back to old twrp, just flash any nougat/marsh roms that not came from zormax (los13 is not like this), after you go back to other rom, you can now change your curent rom to gold or any you want twrp recovery build.
[/B]
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
New Fixes
Discover: 05-23-17
Problems:
* If you flash twrp gold in latest sevemaxs 3.1.1 twrp and youre running in RROS Zormax, your current twrp will gone after you reboot.
Fixed
* If you got this problem, just flash recoveryN1 (Replace name to recovery.img) via ADB, if you know how to flash the twrp just go, if you dont know search on tutorial on youtube.
Issues:
* TWRP 3.1.1 is the only custom recovery can support in this ROM, so if you replace or flash any recovery that not came by zormax, your TWRP will gone.
*
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
DualBootPatcher Support (Not officially supported by developer)
* If you have problem to adding this rom in Dualbootpatcher, you may add this in the end of build prop
Add "ro.patcher.device=A7010a48" to end of your build.prop,
save and reboot
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
MOD's
Dolby Atmos from Ahrion>https://forum.xda-developers.com/android/apps-games/soundmod-axon-7-dolby-atmos-t3412342
Dolby r6.5
Magisk 13.0>https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Changelog:
Code:
[LIST]
[B]
New Update 1.6
1. Added Ambient Display Patched
- Security patches as of September 5 blueborne
2. PA ColorEngine (Theme)
3. 5.8.5 Tag
V1.5
1. Updating the RR to version 5.8.4
2. Security patch from August 5
3. RR code of August 27
4. Ambient Display (Lite version)
5. New settings in "Advanced settings"
6. New libraries of cameras
7. New application "Camera" with improved mode of video recording in low light, pause during video shooting and other parameters
8. Stereo audio recording during video recording (not tested)
V1.4
* Fix sim2 signal
* Synchronize latest RROS changes
V1.3
* New camera libs
* USB Tethering fixed
* RR Sync (06=23)
V1.2
* Merged Android_7.1.2-r17
* June Security patch
* New camera libs
* Add VR mode
* Fixed Night Mode (Nightlight)
* Added powerprofile patch
* Wifi Display
* Synchronize latest rros and los changes (06-15-17)
V1.1
- Offline charging / charging fixed
- Priority of LED notifications
- Support for MTP in recovery
- New GPS Driver
- Support for ANT +
- Updating the RR code from 05/26/2017
- On the lock screen, in real time shows the current and charge voltage:
[/B]
[/LIST]
Creditos:
Zormax -Official OP
Version Information
Resurrection Remix ROM by Zormax, for A7010 & K4 Note
ROM Updated: 08-28-17
Thread Updated: 06-28-17
Author/Developer : @Zormax
Based On : Nougat LineageOS
Thread Created : 05-21-17
Is the fingerprint not working???
Guys,
Im on now in this rom, i will give feedback after several testing.
Thankyou,..
So far all is ok
* Camera with all 13MP/8MP with 16:9/4:3 ratio
* Network is working
* Wifi is working
* Video recording is fully working
* Fingerprint is working
* GPS is working
* Compass is working
* Overall sensors is working
other stuff is working like on stock
idk if Calling/in-call/received messages/incoming messages is working, but i think is working
I send my SC after i restore my titanium backup!!
SYSTEM UI CRASH- after i restore backup from titanum and reboot... idk why.. i send a report to zormax..
edarick said:
So far all is ok
* Camera with all 13MP/8MP with 16:9/4:3 ratio
* Network is working
* Wifi is working
* Video recording is fully working
* Fingerprint is working
* GPS is working
* Compass is working
* Overall sensors is working
other stuff is working like on stock
idk if Calling/in-call/received messages/incoming messages is working, but i think is working
I send my SC after i restore my titanium backup!!
SYSTEM UI CRASH- after i restore backup from titanum and reboot... idk why.. i send a report to zormax..
Click to expand...
Click to collapse
Hai ..can you pls tell me the installation procedure for this rom
Ganesh.V said:
Hai ..can you pls tell me the installation procedure for this rom
Click to expand...
Click to collapse
1. Make the backup: system, data, not boot, recovery
2. For those who want a USB flash drive in the system, only the external (internal space will be involved under all application), then you have to move everything from the internal to the external USB drive.
3. Download the firmware, download the addon.
5. Extract both archives and put them on the external card contents.
6. Reboot into recovery.
7. Making wipes are: dalvick, data, cache, system (and if nvdata recovery 3.0.2-3 and above)
8. Set "as the img" after recovery: boot_2sd.img as the "Boot" and system.img as the "System image", for those who want one card in the system, set boot_1sd.img - for a place boot_2sd.img
9. Also, be sure to put a new recovery: recoveryN1.img
10. In recovery main menu, do a reboot back into recovery.
11. Install open_gapps ******. Zip and ROOT_SuperSU *****. Zip
12. loaded in the system set up.
abidifethi said:
1. Make the backup: system, data, not boot, recovery
2. For those who want a USB flash drive in the system, only the external (internal space will be involved under all application), then you have to move everything from the internal to the external USB drive.
3. Download the firmware, download the addon.
5. Extract both archives and put them on the external card contents.
6. Reboot into recovery.
7. Making wipes are: dalvick, data, cache, system (and if nvdata recovery 3.0.2-3 and above)
8. Set "as the img" after recovery: boot_2sd.img as the "Boot" and system.img as the "System image", for those who want one card in the system, set boot_1sd.img - for a place boot_2sd.img
9. Also, be sure to put a new recovery: recoveryN1.img
10. In recovery main menu, do a reboot back into recovery.
11. Install open_gapps ******. Zip and ROOT_SuperSU *****. Zip
12. loaded in the system set up.
Click to expand...
Click to collapse
Thank you...
In this rom, can we switch the network to lte only, or 3g only? Because in the other cusroms i can't do that.
Ask
abidifethi said:
1. Make the backup: system, data, not boot, recovery
2. For those who want a USB flash drive in the system, only the external (internal space will be involved under all application), then you have to move everything from the internal to the external USB drive.
3. Download the firmware, download the addon.
5. Extract both archives and put them on the external card contents.
6. Reboot into recovery.
7. Making wipes are: dalvick, data, cache, system (and if nvdata recovery 3.0.2-3 and above)
8. Set "as the img" after recovery: boot_2sd.img as the "Boot" and system.img as the "System image", for those who want one card in the system, set boot_1sd.img - for a place boot_2sd.img
9. Also, be sure to put a new recovery: recoveryN1.img
10. In recovery main menu, do a reboot back into recovery.
11. Install open_gapps ******. Zip and ROOT_SuperSU *****. Zip
12. loaded in the system set up.
Click to expand...
Click to collapse
Bro, what the mean exactly, i dont understand step no 2 and 8 ??
support a7010a48 ?
lek669 said:
support a7010a48 ?
Click to expand...
Click to collapse
Yes..try it
Sc
Awesome ROM N
Some Feedback for Awesome ROM i've tasted
1. I've faced rotation not work, tried turn on and turn off still not work, wipe and restarts 3 time still not work, please fix bro,
2. There's no ambient display, hoping present in next update
I love this ROM, sound speaker is amazing like stock ROM when I flash Dolby atmost,
hoping you release new version withaut anything change in SoundMod, 'cause its great
Thanks for amazing rom
Imam mustofa said:
Some Feedback for Awesome ROM i've tasted
1. I've faced rotation not work, tried turn on and turn off still not work, wipe and restarts 3 time still not work, please fix bro,
2. There's no ambient display, hoping present in next update
I love this ROM, sound speaker is amazing like stock ROM when I flash Dolby atmost,
hoping you release new version withaut anything change in SoundMod, 'cause its great
Thanks for amazing rom
Click to expand...
Click to collapse
Post your report in official dev page.. go to page 1
edarick said:
Post your report in official dev page.. go to page 1
Click to expand...
Click to collapse
In lenovo.forum??
Imam mustofa said:
In lenovo.forum??
Click to expand...
Click to collapse
Yeah
Android O Sub theme
edarick said:
Android O Sub theme
Click to expand...
Click to collapse
Bro can you rotate phone? Tried Play Movie from MXplayer is not work
Rotation is not working (2/32GB variant) any idea?
Here is the sc of rotation
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1 (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
CyanogenMod 12.1
for Lenovo Tab2 A7-10F
(MT8127 only)
Disclaimer
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Prerequisites
latest LP Firmware, flashed with SP Flash Tool : firmware
latest TWRP : TWRP thread
clean install : you can try to dirty flash, but if you have issues you'll have to wipe your data partition
Working
basic rom features
Youtube works in HD, including live streaming
video recording : 480p videos are encoded in h264, can't be played on tablet with google video player but can be played with vlc or on a computer
Not working
FM Radio
some video streaming
Changelog
2021/01/02
fix moving apps to SDCdard
some MTK fixes : wifi tethering, thermal, battery, mali symbols
2020/12/31
Removed build: if you're on 2020/12/31 build and don't want to download a whole new build, a patch is attached to the first post of this thread to remove the background service that became useless.
governor is now userspace (removed)
[*]performance enhancement : after tablet wakes from sleep, cpu max frequency is 1040MHz.
workaround : a background service now checks this and restores power profile so max cpu frequency is 1300 MHz
[*]fix moving apps to SDCdard
[*]some MTK fixes : wifi tethering, thermal, battery, mali symbols
[*]first build with Tab2 A7 commonized trees
2020/11/11
initial release of 2020 builds
Please
do not use included CM root, use magisk instead
do not ask for ETA
do not ask for lineage 13 or newer
no USB driver help in this thread
do not re-upload files anywhere
if you report issues, provide logs
Downloads
ROM : latest file from androidfilehost
Opengapps : https://opengapps.org/
Magisk : official xda thread
Installation
KitKat users : If you're coming from a KitKat ROM, you need to install stock LolliPop upgrade before flashing CyanogenMod.
Download the ROM (and optional Gapps) zip, and put it on the internal or internal sdcard of your tablet
Boot TWRP recovery
Perform a nandroid backup of your current ROM (optional but recommended)
Wipe Data/Factory reset
Flash ROM
Optional: Install the Google Apps addon package
Reboot
Update
If not explicitly asked to do a clean install, you can update a previous version without wiping your data
Download the updated ROM
Boot TWRP recovery
Perform a nandroid backup of your current ROM (optional but recommended)
Flash ROM
Wipe Cache/Dalvik cache
Reboot
Credits
Cyanogenmod
Pix106
Fire855
xen0n
ggow
olegsvs
andrew264
Tirth Patel ([email protected])
Thanks to all the people who contributing with testing the builds
Contributors
pix106
Source Code: https://github.com/LenovoTab2A7
Reserved
Reserved
WOW,great work
Can't wait to try it,I will make a youtube review as soon as possible too.Its unbelievable that its bugless...truly amazing,gave our cheap tablet a new breath of live :3
MaRtYy01 said:
WOW,great work
Can't wait to try it,I will make a youtube review as soon as possible too.Its unbelievable that its bugless...truly amazing,gave our cheap tablet a new breath of live :3
Click to expand...
Click to collapse
Yeah , I didn't found any issues yet so its bugless.
1.When installing gapps
2.Not connected to the PC
debug usb need to reconnect, then connect to the PC
3. Memory card does not work when connected to PC
pix106 said:
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5.1 (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
> All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
What's Working :-
> Wifi
> Bluetooth
> Sound
> GPS
> Both Storage
> OTG
> Camera (Photos & Video)
> Media Playback
> Sensor
> Wifi Hotspot , USB Tether , BT Tether
> VPN
Not Working :-
> You Tell Me
Downloads :-
ROM :- Cyanogenmod 12.1
Gapps :- opengapps.org (ARM/5.1/Pico)
Installation :-
1. Download the zip(s)
2. Install a compatible Recovery (Here's TWRP)
3. Perform a nandroid backup of your current ROM (Optional)
4. Wipe data/factory reset
5. Flash CyanogenMod
6. Optional: Install the Google Apps addon package
7. Reboot
Credits :-
1. Tirth Patel ([email protected])
2. pix106
3. Cyanogenmod
XDA:DevDB Information
CyanogenMod 12.1 for Lenovo Tab2 A7-10F (MT8127), ROM for all devices (see above for details)
Contributors
pix106, [email protected], Doume, in a previous project
Source Code: https://github.com/thp1997/android_device_lenovo_Tab2A710F
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
Based On: CyanogenMod
Version Information
Status: Beta
Created 2016-10-12
Last Updated 2016-10-12
Click to expand...
Click to collapse
Wow Thanks dude going to Download And Try it now finally im bored with stock rom lol XD
DenisDeneck said:
When installing gapps
Not connected to the PC
Click to expand...
Click to collapse
Which gapps are you installing , I never found any issue with gapps. Maybe you didn't wipe data, cache and system.
Just go to wipe > advance wipe and wipe system,cache,data,dalvik cache then flash.
[email protected] said:
Which gapps are you installing , I never found any issue with gapps. Maybe you didn't wipe data, cache and system.
Just go to wipe > advance wipe and wipe system,cache,data,dalvik cache then flash.
Click to expand...
Click to collapse
Thanks, but I do not put the firmware for the first time
The point is clearly not in the GAPPS
I put a clean system with all WIPE
Deleted double post
DenisDeneck said:
Thanks, but I do not put the firmware for the first time
Click to expand...
Click to collapse
Try :
- wipe data, system, cache, dalvik cache
- flash ROM
- do NOT reboot
- flash Gapps
- reboot
That's what i just did.
Build removed for investigation on the problem.
Sorry for inconvenience, it will be back ASAP.
Help!
Help Me pls I cant install it, I got this error Message in TWRP
"Cant Install this package on top of incompatible data.
Please try another package or try factory reset
(Red Font)
Updater Process ended with ERROR: 7
Error Installing zip File '/External_sd/CM-12.1-20161012-UNOFFICIAL-Tab2A710f.zip'
Im using TWRP Tab2A710F_TWRP-3.0.2-0_pix-v0.13.img
Thanks B4
Hey can i install this rom using an older version of twrp? Bcoz the newer version never worked for me. And after flashing this rom, will the recovery automatically replaced? If yes, can i got back to the previous twrp again?
Also, this thread is not there in the lenovo tab2 a710 discussion forum??
egha5037 said:
Help Me pls I cant install it, I got this error Message in TWRP
"Cant Install this package on top of incompatible data.
Please try another package or try factory reset
(Red Font)
Updater Process ended with ERROR: 7
Error Installing zip File '/External_sd/CM-12.1-20161012-UNOFFICIAL-Tab2A710f.zip'
Im using TWRP Tab2A710F_TWRP-3.0.2-0_pix-v0.13.img
Thanks B4
Click to expand...
Click to collapse
Don't install the package you downloaded yesterday, it has a problem and was removed.
Delete it, [email protected] will upload the good version later today.
The TWRP error message, and the install instructions on the first post seem pretty clean to me : you need to "factory reset"=wipe all data first
mayank22 said:
Hey can i install this rom using an older version of twrp? Bcoz the newer version never worked for me.
Click to expand...
Click to collapse
I don't know, i have only been using 3.0.2 since i built it, and i used it a lot
mayank22 said:
And after flashing this rom, will the recovery automatically replaced? If yes, can i got back to the previous twrp again?
Click to expand...
Click to collapse
TWRP will still be there.
mayank22 said:
Also, this thread is not there in the lenovo tab2 a710 discussion forum??
Click to expand...
Click to collapse
Our device doesn't have a real device section, like flagship devices do.
We have a "tag" : http://forum.xda-developers.com/t/lenovo-a710
Dev threads cannot be created directlyinto a tag, i asked a moderator to move it under the tag seconds after creating the thread.
So it will be moved eventually.
Where are the download link ? Its says 404 not found please copy the link
abdullahcr73 said:
Where are the download link ? Its says 404 not found please copy the link
Click to expand...
Click to collapse
Read the last posts, build has been removed fast because it was bad.
[email protected] will upload it later today.
pix106 said:
Don't install the package you downloaded yesterday, it has a problem and was removed.
Delete it, [email protected] will upload the good version later today.
The TWRP error message, and the install instructions on the first post seem pretty clean to me : you need to "factory reset"=wipe all data first
Click to expand...
Click to collapse
anyway i have do factory reset and wipe data still get that message even, and i try to flash debloated ROM and after the fist boot i do factory reset still got the same message dunno what happen and how to solve it
Tell me when the download link ready i really want to move to CM bored with debloated stock rom hehehe
thanks before for ur help and answering my question :good: really appreciate it
egha5037 said:
anyway i have do factory reset and wipe data still get that message even, and i try to flash debloated ROM and after the fist boot i do factory reset still got the same message dunno what happen and how to solve it
Tell me when the download link ready i really want to move to CM bored with debloated stock rom hehehe
thanks before for ur help and answering my question :good: really appreciate it
Click to expand...
Click to collapse
twrp in paragraph Cleaning select the data format.
further write yes.
LineageOS 14.1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Disclaimer
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Installation
If you are installing custom ROM for the first time ever:
1. MAKE THE BACKUP OF ALL YOUR DATA!
2. UPDATE THE TABLET TO LATEST MARSHMALLOW ROM VIA ODIN!
Generic installation procedure:
1. MAKE THE BACKUP OF ALL YOUR DATA!
2. DOWNLOAD THE ZIP(S)
3. INSTALL A COMPATIBLE RECOVERY
4. WIPE YOUR DATA (FACTORY RESET)
5. FLASH LINEAGEOS
6. FLASH THE GOOGLE APPS PACKAGE (OPTIONAL)
7. REBOOT
NOTE: To have seamless OTA updates, it is REQUIRED to flash TWRP 3.2.3-1 or newer (build date 25.10.2018 or newer)!
One-time migration to official builds without losing your data:
1. DOWNLOAD MIGRATION SCRIPT
2. BOOT RECOVERY AND UNLOCK YOUR DATA PARTITION IF IT IS ENCRYPTED
3. FLASH THE MIGRATION SCRIPT
4. FLASH THE OFFICIAL ROM
5. WIPE DALVIK AND CACHE
6. REBOOT
NOTE: If modem and RIL stops working after migration, then it is MANDATORY TO FLASH THE LATEST MARSHMALLOW STOCK ROM VIA ODIN and perform a clean installation of LineageOS!
Going back to unofficial builds without losing your data (if necessary):
0. DOWNLOAD MIGRATION SCRIPT
1. BOOT INTO RECOVERY, UNLOCK THE DATA PARTITION IF IT ENCRYPTED AND ATTACH USB CABLE
2. PUSH THE MIGRATION SCRIPT TO THE TABLET:
Code:
adb push migration.sh /migration.sh
3. OPEN ADB SHELL ON PC AND PERFORM THE MIGRATION:
Code:
chmod +x /migration.sh
sh /migration.sh unofficial
4. FLASH THE UNOFFICIAL ROM
5. WIPE DALVIK AND CACHE
6. REBOOT
Downloads / Changelogs
ROM
su addon
Google Apps (GApps)
Changelogs (Mirror)
Changelogs (Official)
Credits
Android Open Source Project (AOSP)
LineageOS Project
Team Exynos5420
@Barracuda77777, @UpInTheAir, @crpalmer
@eousphoros, @nvertigo67, @Nexorrr
and all the supporters, testers and advisors
Bugs
Messenger app calls using BT headset have no sound
Voice call using the built-in mic have an unsuppressed echo
HDMI audio is played on internal speakers
Widevine DRM security level is L3
Bug Reporting
Other issues?
Before posting in this thread, make sure of a few things:
You used the search function of the forums.
If you are the only one having a problem. Boot into recovery, wipe data/factory reset, reflash the rom/gapps and nothing else. Boot up and see if the problem persists.
Make sure your post is relevant to this thread.
Logs! You can use this: SysLog
Source Code and Development
Kernel
Device Tree
LineageOS Code Review
LineageOS Bug Tracker
LineageOS Jenkins Server
Woo-hoo, congratulations!!! Finally T805 is official [emoji41]
Надіслано від мого SM-G965F, використовуючи Tapatalk
Those who already have installed the unofficial version - can they now simply use internal upgrade functionality to get on the official one?
Maheshwara said:
Those who already have installed the unofficial version - can they now simply use internal upgrade functionality to get on the official one?
Click to expand...
Click to collapse
https://wiki.lineageos.org/signing_builds.html#test-keys-to-your-own-release-keys-or-vice-versa yes it is possible.
Migration did not work for me:
Unofficial to official migration
Error: /data/system/packages.xml not found
Click to expand...
Click to collapse
Nonetheless, tried to flash the official zip what failed with ERROR 7. What to do now?
The instruction moved to post #1
Do we need to root the t805?
Thanks
J4G3D said:
Do we need to root the t805?
Thanks
Click to expand...
Click to collapse
Do you mean rooting the stock firmware before flashing TWRP? No, not needed as zip will overwrite BOOT (kernel + ramdisk) and SYSTEM and CACHE and DATA will be wiped on factory reset.
If you meant not this but "should we flash addonsu after LineageOS", I'd say it is up to you, but I prefer having root access for DriveDroid and other root-only apps. If you need to pass SafetyNet, you can always turn it off in Developer settings.
gellmar said:
If you need to pass SafetyNet, you can always turn it off in Developer settings.
Click to expand...
Click to collapse
Or install Magisk ???
Maheshwara said:
Or install Magisk ???
Click to expand...
Click to collapse
Or install Magisk. But I made all official and unofficial builds to pass SafetyNet if root is turned off. Presuming you need root for special tasks, you can turn it on, do your work and turn it back off and SafetyNet will not suffer.
gellmar said:
Do you mean rooting the stock firmware before flashing TWRP? No, not needed as zip will overwrite BOOT (kernel + ramdisk) and SYSTEM and CACHE and DATA will be wiped on factory reset.
If you meant not this but "should we flash addonsu after LineageOS", I'd say it is up to you, but I prefer having root access for DriveDroid and other root-only apps. If you need to pass SafetyNet, you can always turn it off in Developer settings.
Click to expand...
Click to collapse
Thanks, I managed to flash it perfectly. Well the first time i had a error in TWRP. But I then tried again, this time erasing all internal data and it flashed fine.
Where I am stuck now is gApps. I get error 20 and ive tried various "fixes" in terms of install procedures found on xda.
What check boxes should we pick in the gapps site you've linked us to?
Any tips/advice?
J4G3D said:
Thanks, I managed to flash it perfectly. Well the first time i had a error in TWRP. But I then tried again, this time erasing all internal data and it flashed fine.
Where I am stuck now is gApps. I get error 20 and ive tried various "fixes" in terms of install procedures found on xda.
Any tips/advice?
Click to expand...
Click to collapse
Last time I checked with OpenGapps arm - 7.1 - pico it flashed fine right after LineageOS and addonsu. Try rebooting again into recovery and installing gapps I mentioned and factory reset again.
gellmar said:
Last time I checked with OpenGapps arm - 7.1 - pico it flashed fine right after LineageOS and addonsu. Try rebooting again into recovery and installing gapps I mentioned and factory reset again.
Click to expand...
Click to collapse
Arm or arm64?
edit: sorry just saw you said arm.
All installed now.
I was about to sell this tablet, due to lack of updates. But stumbling across XDA has no doubt forced me to keep this tablet, which I think is still a top tablet.
Anyway, ll seems good so far, many thanks for the hard work!
J4G3D said:
Arm or arm64?
edit: sorry just saw you said arm.
All installed now.
I was about to sell this tablet, due to lack of updates. But stumbling across XDA has no doubt forced me to keep this tablet, which I think is still a top tablet.
Anyway, ll seems good so far, many thanks for the hard work!
Click to expand...
Click to collapse
Hey J4G3D, I've got a T805 my kids use mostly for Netflix, or I put movies on it when we go on road trips. I'm gonna try this out!! I didn't see any detailed instructions in the first post so did you selected arm, 7.1 and Stock for the google apps?
Thanks.
MannyMania said:
Hey J4G3D, I've got a T805 my kids use mostly for Netflix, or I put movies on it when we go on road trips. I'm gonna try this out!! I didn't see any detailed instructions in the first post so did you selected arm, 7.1 and Stock for the google apps?
Thanks.
Click to expand...
Click to collapse
Hi
I rooted my device, just because it seemed simple to do so. Here:
https://www.theandroidsoul.com/root...10-5-lte-sm-t805-one-click-cf-auto-root-tool/
-Then I loaded custom recovery.
-Backed up anything I needed backing up
-Put the rom file, gApps (arm, 7.1, pico) onto a sd card
1. Boot into Recovery Mode (TWRP)
2. Wipe > Advanced Wipe > Select On (enable tick) for Dalvik / Art Cache, System, Data, Internal Storage, Cache,
3. Swipe to Wipe at Bottom of Screen,
4. Back to Main start screen,
5. Wipe > Format Data,
6. Type 'Yes' and press blue checkmark at the bottom-right corner,
7. Go Back to Main Start Screen to -VERY IMPORTANT---> Install Rom and GApps,
8. After you have finished installing the Rom and GApps > Wipe Cache/Dalvik > Swipe to Wipe
9. Reboot System
Job done.
Battery life appears to be much, much more stable now too. Apps also appear to be more stable, sky news used to crash every time I used it, at least once. Now it doesn't
Only bug i can see so far are the weather app not showing as a widget on the main screen under the clock. All is set and the recommended weather widget downloaded, but the weather just don't seem to appear. Also when having a pin on the lock screen, its only unlock-able via landscape mode and not portrait mode.
J4G3D said:
Only bug i can see so far are the weather app not showing as a widget on the main screen under the clock. All is set and the recommended weather widget downloaded, but the weather just don't seem to appear. Also when having a pin on the lock screen, its only unlock-able via landscape mode and not portrait mode.
Click to expand...
Click to collapse
I have a perfectly working weather setup (including lockscreen weather) using OpenWeatherMap provider:
0. Remove all other weather providers, if downloaded
1. Install the OpenWeatherMap provider from LineageOS Extras
2. On the main screen, long-tap to have widget panel appear, then press "Widgets".
3. Add cLock widgetby long-tapping it to position on Main screen.
4. Under cLock widget settings open, select OpenWeatherMap as weather source on Weather tab and press a gear to enter website API key. When a permission dialog for GPS pops up, enable High Accuracy mode (that's esssential!)
5. Press OK everywhere to apply settings (dont use back button!)
6. Go to Settings - Security - Lock Screen and tap the gear to see Lockscreen Options. Tick the "Show weather on lockscreen" mark.
7. Let it load the weather and enjoy the notification in lockscreen.
Once you remove the cLock widget off main screen, the lockscreen weather will disappear.
Lockscreen rotation is enabled in Settings - Screen - Screen Rotation - Enable lockscreen rotation.
gellmar said:
The instruction moved to post #1
Click to expand...
Click to collapse
Got it with this instruktion. Thanks. Running the migration script via ADB while system is running did not work, but doing it via recovery was fine.
Hello! Thanks for your work! Excellent firmware! The tablet is back in service!
For information the received messages are not displayed on the application icons only in the status bar.
J4G3D said:
Hi
I rooted my device, just because it seemed simple to do so. Here:
https://www.theandroidsoul.com/root...10-5-lte-sm-t805-one-click-cf-auto-root-tool/
-Then I loaded custom recovery.
-Backed up anything I needed backing up
-Put the rom file, gApps (arm, 7.1, pico) onto a sd card
1. Boot into Recovery Mode (TWRP)
2. Wipe > Advanced Wipe > Select On (enable tick) for Dalvik / Art Cache, System, Data, Internal Storage, Cache,
3. Swipe to Wipe at Bottom of Screen,
4. Back to Main start screen,
5. Wipe > Format Data,
6. Type 'Yes' and press blue checkmark at the bottom-right corner,
7. Go Back to Main Start Screen to -VERY IMPORTANT---> Install Rom and GApps,
8. After you have finished installing the Rom and GApps > Wipe Cache/Dalvik > Swipe to Wipe
9. Reboot System
Job done.
Battery life appears to be much, much more stable now too. Apps also appear to be more stable, sky news used to crash every time I used it, at least once. Now it doesn't
Only bug i can see so far are the weather app not showing as a widget on the main screen under the clock. All is set and the recommended weather widget downloaded, but the weather just don't seem to appear. Also when having a pin on the lock screen, its only unlock-able via landscape mode and not portrait mode.
Click to expand...
Click to collapse
Hey J4G3D, I had no luck. My Tablet however is an SM-T805W. It's a Canadian LTE tablet with Rogers as the carrier. I've been doing some reading and it doesn't look to good for my device. Haven't given up yet so the quest goes on!! Thanks for the instructions though!!
Cheers.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* Syberia Team not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications.
*/
Read the whole OP! Be respectful to each other and don't ask for ETAs, it's considered as being rude!
Syberia Project (aka Syberia OS) is a custom ROM for Xiaomi MI A3 that implements various features. This project was designed by our "Syberia Team" from scratch based on AOSP source code with some CAF fixes and improvements. Our team: @DennySPB, @blinoff82, @alexxxdev. Also many thanks to our designers @rlshukhov and @a18h for logos, wallpapers and bootanimations.
If you like our work you can buy us a cup of coffee or a glass of beer
Here
Code:
Monet
VoLTE, VoWiFi
LineageOS LiveDisplay
MicroG support
Pocket Judge
Call recording
Statusbar items switches
Three finger swipe to screenshot
Extended powermenu
...Settings and features will be gradually added.
SyberiaOS ROM Download
Recovery Download
Magisk Download
First time clean installation:
Code:
- Unlocked bootloader is required!
- You must have installed FW11 based ROM.
1 - Boot your device into fastboot mode:
adb reboot bootloader (or power off and power on again
while pressing Power + Vol Down)
2 - Flash Syberia recovery via fastboot
fastboot flash boot <name of the file>
3 - Reboot to recovery
4 - Perform factory reset (formatting data is important)
5 - Here you have 2 choices to install rom
1) Install > Sideload from ADB
on PC open terminal and type - adb sideload <rom zip name>
2) Install > install from sdcard or OTG
Just copy rom to the sdcard or OTG and install from it.
6 - Reboot to system, wait until rom booted, then reboot
in recovery again.
7 - Now you can install other zips (gapps, magisk etc) if needed by
using the methods described in the 5'th line of guide.
8 - If you flashed gapps, factory reset once more is a Must!
Updating:
Code:
1. Reboot into recovery
2. Here you have 2 choices to install rom
1) Install > Sideload from ADB
on PC open terminal and type - adb sideload <rom zip name>
2) Install > install from sdcard or OTG
Just copy rom to the sdcard or OTG and install from it.
3. Reboot to system
Code:
- You tell me only with logcat (screenshots)
Attention! We are not responsible for the operability of your device if you use third-party kernel, Xposed Framework or unverified Magisk modules.
Official website
Syberia Project Github
Syberia Project Gerrit
Device Source
Kernel Source
Official Telegram Group
Announcements Telegram Group
Development Telegram Group
Device Support Group
Code:
- LineageOS
- AOSPA (aka Paranoid Android)
- Nitrogen Project
- Benzo Rom
Update 11/07/2022
Changelog:
Fixed GPS logspam after caf update.
Updated GPS blobs to a12.
Updated GPS stack to LA.UM.9.11.r1-05600-NICOBAR.QSSI12.0
Ported DolbyAtmos from MOTO G PRO.
Implemented VPN tethering support.
Fixed QS clock size and placement.
Bring back "old" style QS brightness slider (temporary, until new style is fixed).
Spoiler: Archive
Update 30/06/2022
Changelog:
Removed mic boost.
VoiP changes.
Added keylayout for wired headphones.
Again increased haptics a bit.
Dropping prebuilt camera stack and building OSS camera stack.
Reworked Syberia UI Style.
Notes:
This build contains big changes for UI, so to avoid issues "clean flash" recommended
Update 01/06/2022
Changelog:
Implemented UDFPS dim layer (no brightness flicker)
Another VOiP fixes.
Added custom UDFPS animations and icons.
Added missing FM radio.
Increased haptics strength a bit.
Improved UDFPS scanning speed.
Update 17/04/2022
Changelog:
Improved boot time for ~3sec.
Fixed some system errors from log spam.
Added new NTP servers for faster Location.
Improved GPS stability and accuracy.
Enabled LiveDisplay HAL for picture adjustment.
Improved UDFPS callback delay’s.
Lowered size of UDFPS scan circle-point (theoretically this change should increase scanning speed but requires a good finger scan)
Imported from stock Health HAL (fixes charging calculations)
Upstreamed kernel to 4.14.275
Selinux Enforcing
Update 28/09/2021
Changelog:
Initial Build
Switched to ICE FBE encryption
Vendor updated to CAF LA.UM.9.11.r1-04500-NICOBAR.0 (except camera, audio, gps and DRM)
Switched to AOSP BT impl
Bugs:
Some modes in MIUI camera are not working
Reserved
This is fantastic!
But no matter what I do I can't install even core gapps. I flash them via adb sideload, perform a factory reset and nothing.. I feel like I've tried everything. There's no problem with Magisk tho. Can you please include some gapps in the rom?
Amazing news! Official ROM and latest Android version!
Hopefully the permissive SELinux can be sorted out with enough logs, but still, very nice work so far.
Does anyone can help me about the recovery via fastboot installation? I mean is there need to change slot e.t.c... And after recoverie's flashing, how we reboot to recovery, via a simple fastboot command?Thanks.
jeff.rey said:
This is fantastic!
But no matter what I do I can't install even core gapps. I flash them via adb sideload, perform a factory reset and nothing.. I feel like I've tried everything. There's no problem with Magisk tho. Can you please include some gapps in the rom?
Click to expand...
Click to collapse
Yeah, a12 not so fast at gapps bringup, we have limited chose to BitGapps, Nikgapps or FlameGapps, and Nikgapps with FlameGapps have some issues while flashing it on some devices (already reported to the dev), and only BitGapps works fine, but there are only Minimal package.
However i created a modified Nikgapps(stock) package - download
papafan said:
Does anyone can help me about the recovery via fastboot installation? I mean is there need to change slot e.t.c... And after recoverie's flashing, how we reboot to recovery, via a simple fastboot command?Thanks.
Click to expand...
Click to collapse
Generally speaking, IMHO doesn't matter how you got into recovery be it by command or power+vol+
maluus said:
Generally speaking, IMHO doesn't matter how you got into recovery be it by command or power+vol
Click to expand...
Click to collapse
And the slots? Is there any need to change them during flashing?
papafan said:
And the slots? Is there any need to change them during flashing?
Click to expand...
Click to collapse
When you flash something over fastboot you are to manage slots. When you do by recovery it manages slots. So up to flashing the recovery you'll manage slots. Afterwards flashes are done by recovery. Since recovery changes slots when you flash rom or update. Both slots should have the same firmware level (e.g. android 11 firmware.) If you have incompatible firmware on other slot it may cause problems on next update or full flash. IMHO op should explain a bit more about slot management. The same process is known to cause unwanted problems before. You can check the lineageos 18.1 oss thread for it.
Magicxavi said:
Update 28/09/2021
Changelog:
* Initial Build
* Switched to ICE FBE encryption
* Vendor updated to CAF LA.UM.9.11.r1-04500-NICOBAR.0 (except camera, audio, gps and DRM)
* Switched to AOSP BT impl
Bugs:
* Some modes in MIUI camera are not working
* Selinux Permissive
Click to expand...
Click to collapse
Hi,
Is it possible to safely install this ROM from android 10 stock EU version? (or, must I already be under A11 and in this case what should I do?)
I'm still stuck on A10 and the September 2020 security patch on my French version of the Mi A3
Sorry I'm a beginner
I think you must first update to a11. Do factory reset on your a10 first.
NikBos said:
I think you must first update to a11. Do factory reset on your a10 first.
Click to expand...
Click to collapse
Problem is that I still do not have the possibility to do OTA to A11...
In France we are literally blocked on A10 and the September 2020 security patch...
Then you can flash it with mi flash.
NikBos said:
Then you can flash it with mi flash.
Click to expand...
Click to collapse
I don't understand what to do in order not to lose my data, I would just like to update.
If I want to install the update without fear I have to make a backup. OK
To make a full backup I need TWRP. OK
To install TWRP to be able to make my backup and not lose any data I have to root my device with magisk. OK
If I root my device with magisk it makes me wipe all my data...
Hobbi1 said:
I don't understand what to do in order not to lose my data, I would just like to update.
If I want to install the update without fear I have to make a backup. OK
To make a full backup I need TWRP. OK
To install TWRP to be able to make my backup and not lose any data I have to root my device with magisk. OK
If I root my device with magisk it makes me wipe all my data...
Click to expand...
Click to collapse
If I were you I wouldn't rely on twrp for backup. Because once you update to A11 you ll have problem with twrp hence restoring it. On the other hand even if you are able to restore it somehow, probably you would end up with a bootloop anyway. Because when android version changes, data partition backup of other versions won't be compatible with newer one. I suggest you to have per app backup within os.
New update is out!
New update is out!
everything working fine, new icons and animations for udfps are pretty good and now it recognizes really fast. one thing i noticed is that the screen flicks when unlocking with figngerprint but just a little bit, its not something that really bothers as before. updating was fine without even needing to make a backup. anyways ty for, basically, the best rom for mi a3, if it wasnt that, i think we all would have already changed it. keep up the good work!
I just did the installation and the rom is fantastic!
Leaving Miui..
Everything seems to work very well.
Congratulations to those involved!!
Sorry for my english, I'm from Brazil
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SparkOS is an AOSP based ROM, packed with many features without sacrificing stability and performance.
In short a fully functional operating system as stable and customizable as it should be.
Code:
/* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Device Specific Issues:
• None
Requirements
• You must be on Latest firmware v11.0.3.0 or v11.0.2.0
• You must use any of the recommended recovery (links are given below).
Downloads
Get the latest SparkOS Build for vince: Download
Firmware: https://xiaomifirmwareupdater.com/firmware/vince/
Nikgapps: https://nikgapps.com/
Mindthegapps (Use arm64 only): http://downloads.codefi.re/jdcteam/javelinanddart/gapps
Magisk: https://github.com/topjohnwu/Magisk/releases
Recommended Recoveries:
- TWRP by Starlight
- Orangefox R11.0 Beta
- Read the latest changelogs from: Here
Notes
• Build type: User
• Encryption not supported, Decrypted by default
• Selinux is Enforcing
• FMRadio Included
• Do not flash recovery.img available on the spark download website
Flashing Instructions:
Clean flash (Coming from a different ROM):
• Download ROM
• Download Custom Google Apps Package (Like Nikgapps core/basic or Mindthegapps) if the ROM is Vanilla variant (On GApps ROM variant Google Apps are included, don't flash a separate Custom Google Apps package)
• Reboot to Recovery.
• Wipe System, Data, Vendor, Cache, Dalvik/ART cache partitions
• Flash latest stable firmware v11.0.3.0 before flashing ROM
• Flash ROM zip
• Flash Custom Google Apps Package if the ROM is Vanilla variant
• Reboot to system
To get root access, Reboot to recovery after ROM setup and flash Magisk.zip
BOOTLOOP SITUATION: If you are coming from stock/custom MIUI or any ROM which had data ENCRYPTION, you will face bootloop and can not boot into the system. In such case you need to FORMAT data after flashing the ROM. Otherwise the ROM won't boot (Read detailed instructions from here)
Dirty flash (Updating to a newer build):
• Download the new update ROM zip
• Reboot to recovery
• Do not wipe anything
• Flash the new update ROM zip
• Flash the same Custom Google Apps Package again you flashed before (For vanilla users)
• Flash Magisk again if you are rooted before (For rooted users)
• Wipe Cache and Dalvik/ART cache
• Reboot to system
Important note regarding SparkOS 13.6 update
This is a huge rebase of the ROM's source code after the March update, So Clean flash is MANDATORY for all users. Some bugs from previous versions have been fixed in this version and some new features can be noticed. Some customizations have been temporarily removed (eg: Smart charging, QS row & column customisation etc) and will be added in future releases (Read official community post).
You should be aware of some known source bugs in this release before updating to 13.6. These bugs are not device specific and are present in all Spark official devices which will be fixed in the next update.
Known bugs are;
1. Launcher settings are crashing with light theme (works fine with dark theme). You can use a different Launcher but I think Pixel launcher Extended will not work anymore as spark is now completely based on lineage
2. Shortcut buttons glitches in recent panel.
3. Visual glitch on Quicksettings/Statusbar after a reboot (Restarting SystemUI fixes it for now)
Join our Telegram Group https://t.me/SparkOSChannel
Buy me a Coffee https://paypal.me/spyroskal
See our website https://spark-os.live/
Device Support Group https://t.me/anandhansprojects_chat
Source Code
SparkOS http://github.com/Spark-Rom
Device Tree and Vendor Tree https://github.com/Spark-Devices
Kernel Tree https://github.com/aospa-vince/android_kernel_xiaomi_vince
ROM OS Version: Android 13.0
Spark-OS Version: Android 13.6
Security Patch Level: May 2023
ROM Kernel: Linux 4.9.x
Stable Release Date: 30.05.2023
Latest Release Date: 30.05.2023
This is great. Seems to run well - but can't get it to play nice with Viper4Android.
droident said:
This is great. Seems to run well - but can't get it to play nice with Viper4Android.
Click to expand...
Click to collapse
No issues with viper4Android here.
Check if you've rooted properly?
Or maybe you are using a mod version of viper4Android.
Been using it for half a year and it's the best Android 13 rom I tried (not that there's many that are up to date)
anandhan07 said:
No issues with viper4Android here.
Check if you've rooted properly?
Or maybe you are using a mod version of viper4Android.
Click to expand...
Click to collapse
I used the repackaged v4a from github. Clearly something went wrong here if it's working at your end. I'll try again later when I'm home as I'll need to install from scratch having reverted to A12. Guessing maybe I just needed to reboot again or something. Here's the version I used:
GitHub - programminghoch10/ViPER4AndroidRepackaged: A refined ViPER4Android installer.
A refined ViPER4Android installer. Contribute to programminghoch10/ViPER4AndroidRepackaged development by creating an account on GitHub.
github.com
I have to say the smooth responsiveness on these new A12/A13 ROM builds is surprising given how often A11 would lock up for me. Maybe my device just finally needed a reset idk.
OK. Mystery solved. Turns out that Viper4Android does indeed work - it just needed an extra reboot.
So I flash it > reboot > v4a App appears on next boot but doesn't work > reboot again > v4a works.
Weird but makes sense. Sorry for the confusion.
I couldn't receive this kind of google login authorization on this rom "is it you trying to sign in". Device wasn't appearing in google account double verification. No problem in a13 elixir.
Also sadly no option 2g connectivity.
Rom itself seems smooth. ATM moved back to A10
I have problem, the screen show on/ off at redmi boot logo
CPU cores seam to be locked to 1400 mhz
Hello İ installed latest Spark OS gapps build on my a205f i loved the rom but it has a bug phone screen freezes cant close the screen no reaction to calls,notifications,holding down the power button the only solution is to wait for the battery drain it happened 2 times what can i do i guees this build is laggy
This is possibly a long shot but any chance of modified files for higher quality audio on Bluetooth SBC (or AAC)? It used to be you could patch it in via Magisk but the module no longer works on newer android versions and if I'm correct the edits need to be made before a ROM is built. If you're able to, any chance of some experimental files for me to try out?
I think the values are in a2dp_sbc_encoder for SBC, a2dp_aac for AAC. A2DP_XXX_DEFAULT_BITRATE 000 where XXX is SBC or AAC and 000 is the bitrate in kbit/s.
Mr.Bra said:
Hello İ installed latest Spark OS gapps build on my a205f i loved the rom but it has a bug phone screen freezes cant close the screen no reaction to calls,notifications,holding down the power button the only solution is to wait for the battery drain it happened 2 times what can i do i guees this build is laggy
Click to expand...
Click to collapse
This is sparkos for vince aka Redmi 5 plus. Not for a205f
droident said:
This is possibly a long shot but any chance of modified files for higher quality audio on Bluetooth SBC (or AAC)? It used to be you could patch it in via Magisk but the module no longer works on newer android versions and if I'm correct the edits need to be made before a ROM is built. If you're able to, any chance of some experimental files for me to try out?
I think the values are in a2dp_sbc_encoder for SBC, a2dp_aac for AAC. A2DP_XXX_DEFAULT_BITRATE 000 where XXX is SBC or AAC and 000 is the bitrate in kbit/s.
Click to expand...
Click to collapse
will see
Latest Vince just got released yesterday - thank you
https://sourceforge.net/projects/sparkosofficial/files/vince/Spark-13.3-Official-vince-20230105-gapps.zip/download
Hi,
I installed this rom, until I see it I'm liking it, but the screen rotation doesn't work.
Any idea?
Thanks...
Hello everyone, just flashed this ROM on my Vince (coming from Elixir 3.3 - A13).
Since I use this phone to debug my apps, I need to connect Chrome DevTools to it.
What I've done so far:
- wiped everything
- installed Spark-13.3-Official-vince-20230105-gapps
- installed Magisk 25.2
- registered my Google account
- updated all apps (through Play Store)
- enabled Developer options, then USB debugging
Now, when I launch Chrome DevTools on PC, I can see the phone but the webpages list is empty; it also doesn't show any WebView instance (see the screenshot below).
Remote debug was working with Elixir 3.3 on the same phone and PC, so I suppose the difference is in some ROM setting... something to be changed here, but I'm out of ideas...
Does anyone have any suggestions about this?
maxi_power said:
Hi,
I installed this rom, until I see it I'm liking it, but the screen rotation doesn't work.
Any idea?
Thanks...
Click to expand...
Click to collapse
First, make sure you have enabled auto rotate screen option. It is disabled by default.
If it's enabled send a screenshot from sensor test app (available in playstore). ROM doesn't have issues auto rotates screen.
nicorac said:
Hello everyone, just flashed this ROM on my Vince (coming from Elixir 3.3 - A13).
Since I use this phone to debug my apps, I need to connect Chrome DevTools to it.
What I've done so far:
- wiped everything
- installed Spark-13.3-Official-vince-20230105-gapps
- installed Magisk 25.2
- registered my Google account
- updated all apps (through Play Store)
- enabled Developer options, then USB debugging
Now, when I launch Chrome DevTools on PC, I can see the phone but the webpages list is empty; it also doesn't show any WebView instance (see the screenshot below).
View attachment 5804415
Remote debug was working with Elixir 3.3 on the same phone and PC, so I suppose the difference is in some ROM setting... something to be changed here, but I'm out of ideas...
Does anyone have any suggestions about this?
Click to expand...
Click to collapse
Can you send logcat?
I am not using this feature. I will test this later.
anandhan07 said:
First, make sure you have enabled auto rotate screen option. It is disabled by default.
If it's enabled send a screenshot from sensor test app (available in playstore). ROM doesn't have issues auto rotates screen.
Click to expand...
Click to collapse
Hi, thanks for the answer.
maxi_power said:
Hi, thanks for the answer.
Click to expand...
Click to collapse
Seems like you messed up persist
So flash persist.img via recovery (in persist partition) and reboot into system. Do not wipe anything.
Link of pesrist.img: https://t.me/anandhansprojects_chat/15693
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
LineageOS is a free, community built, aftermarket firmware distribution of Android 13 (T), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Githup repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Installation:
If you are on stock OS, you need a custom recovery first. You can get the recommended TWRP recovery in the installation instructions link below.
If you are coming from stock or other ROMs, you need to make a factory reset.
As always, make sure to backup before installing this ROM.
Installation Instructions:
Backup your data and see the next post below
Recommended TWRP Image:
twrp-3.7.0_9-0-kuntao.img
ROM Download Links:
Google Drive | SourceForge
Recommended Google Apps Package:
NikGapps-core-13
NikGapps-SetupWizard
NikGapps-AndroidAuto
Root Access:
Magisk v25.2
Source Code:
https://github.com/LineageOS
ROM Firmware Required:
Any version of stock 6.0. Recommended P2a42_S251_171107_ROW
Acknowledgements:
Thanks to all Lineage OS developers
Special thanks to @Astridxx & @XiaoAk for the device tree sources and to @Astridxx for (once again) helping me out
Important Notes:
As you can see from my profile, I'm not an experienced developer. I've made some builds as a considerable amount of users showed interest in having their devices updated with latest LineageOS code. Therefore, my main objective here is to bring the latest Android security patches to kuntao making monthly builds.
To be clear, I'm more in a situation of "user became builder" than of "ROM developer". Please, understand this.
Long live to our beloved kuntao!
XDAevDB Information
[ROM][13][UNOFFICIAL] LineageOS 20 for Lenovo P2
Contributors
@Astridxx ,@XiaoAk
ROM OS Version: 13.x
ROM Kernel: Linux 3.18.x
Based On: LineageOS
Version Information
Status: Stable
Created 2023-03-05
Last Updated 2023-04-20
Installation Instructions
Remember, making a backup of your data before proceeding is recommended
If you are coming from Stock ROM, please refer first to the instructions below:
Install LineageOS on kuntao
If you are coming from any version of LOS18.1 or LOS19.1 or from any ROM that isn't android 13 based, you must perform a clean flash:
0- Make a backup (optional, but recommended)
1- Reboot to recovery
2- Format data (will delete all your data!)
3- Reboot to recovery again
4- Wipe > Advanced Wipe:
- Dalvik
- System
- Vendor
- Data
- Cache
- Internal Storage (optional, but recommended)
5- Flash ROM ZIP, Gapps, Gapps add-ons, Magisk add-on, etc
6- Reboot to system
7- Wait until it boots for the first time (may take some minutes)
8- If Magisk is missing after finishing the setup wizard, please reboot to system
Update Instructions
For updating from one of my builds to another (aka dirty flashing), please do the following:
1- Download ROM ZIP and copy it to the phone
2- Reboot to recovery
3- Flash ROM ZIP
4- Clean cache
5- Reboot to system
Known Issues
- Storage encryption is broken ( FDE was deprecated in a13 )
- Network traffic monitoring ( 4.9 kernel required for this )
- GPU monitoring ( 4.9 kernel required for this )
ROM Doesn't Boot After Flashing
Make sure you formatted /data partition (see installation instructions step 2)
SafetyNet Status Fix Instructions
1- Make sure Magisk was properly installed
2- Open the Magisk App
3- Open App settings (wheel on the top right side of the screen)
4- Enable "Zygisk"
5- Enable "DenyList"
6- Open "Configure DenyList"
6.1- On "Google Play services": Enable "com.google.android.gms" & "com.google.android.gms.unstable"
6.2- On "Google Play Store": Enable "com.android.vending"
7- Click on the back arrow (on top left)
8- Reboot your system
9- Test again (now it should pass)
ROM Change logs
Code:
03/05/2023
- Initial release
03/30/2023
- Fetch latest Device Tree
-- Sepolicy:
--- Address sensor hal denials
--- Address launcher3 denials
--- Allow some apps to access debuggable prop
-- rootdir:
--- Create STSensorHAL folder on data
--- Restore iio sensor device6 on boot
--- Add cpuset for the camera daemon
-- overlays:
--- Disable IMS features for Turkiye networks
--- Enable voWIFI support
-- prop:
--- Disable Bluetooth APCF Extended features
--- Enable ro.hwui.render_ahead and set it to 20 frames
-- Enable selinux ignore never allow flag
-- Don't force enable ims features
-- Remove aptX(HD) encoder shared libs
-- vendorsetup.sh: Add Trebuchet patch
- Update LOS components
-- Manifest:
--- Sync x86_64 webview prebuilts again
--- March 2023 Quarterly Platform Release and Security update
--- gs101 March 2023 Quarterly Platform Release and Security update
-- Update zlib source
- Sync latest LOS sources
- Update platform to android-13.0.0_r35
- Merge March security patch
04/20/2023
- Fetch latest Device Tree:
-- Set default livedisplay mode to 0
-- vendorsetup.sh: Add DeskClock patch
-- trebuchet:
--- Make overview scrim transparent again
--- Kill haptics in recents
-- nfc: Fix Mifare Classic reading
-- sepolicy:
--- Silence suspend_control_service neverallow denial
--- Silence tracingproxy_service neverallow denial
--- Silence fsck_untrusted neverallow denial
--- Allow system_app to access storaged via IPC
-- overlay: Allow gms to access persistent data partition
-- props:
--- Silence ResourcesCompat spam
--- Remove hwui skia atrace properties
--- Disable virtual displays writeback
-- Revert "sepolicy: Allow some apps to access debuggable prop"
- Sync latest LOS sources:
-- lineage: Track the FMRadio App and dependencies
-- Move Trebuchet to default.xml
-- overlay:
--- Disable immersive mode confirmation
--- Move default status bar height to no-rro
-- soong: Bring bootloader_message_offset back
-- envsetup: aospremote: Take .gitupstream into account
- Update platform to android-13.0.0_r41
- Merge April security patch
ROM Screenshots
Attached below.
Great work! Will test it when I have time, been waiting for this..
Hi all. I read these P2 forums for long time, but never participated. I love our P2 phone, riding a P2 since the release date and never changed. Now I got a message from my bank that the android version is too outdated to use their banking app, and they want me to switch to a newer OS. I could have ditched the P2, but couldn't. Therefore....easiest solution was to buy a second one xD I will test on the backup unit some of the roms available here, probably starting from the roms of @leo_97 . I need a stable daily driver, thus when I find something that works for me I will freeze it there for some time. But, in the meantime, I can help out with testing, starting from mid April onwards thus, feel free to contact me, and I will be a bit more active (and not passive) here in XDA for the coming months.
Cheers to all, and thanks @leo_97 , @Astridxx, @XiaoAk (and @mikeioannina for all the past efforts on P2!).
Hi
I just tested it on a P2 for a few hours and it works great! Thanks!
Is there any way to get full device encryption to work?
If I understand correctly, someone can access the phone's files even if you have a pin or password as it is now.
MKbis said:
But, in the meantime, I can help out with testing, starting from mid April onwards thus, feel free to contact me, and I will be a bit more active (and not passive) here in XDA for the coming months.
Click to expand...
Click to collapse
I'll PM you right away.
Draywen said:
Hi
I just tested it on a P2 for a few hours and it works great! Thanks!
Is there any way to get full device encryption to work?
If I understand correctly, someone can access the phone's files even if you have a pin or password as it is now.
Click to expand...
Click to collapse
You are welcome
So, IFAIK we don't have a way to make FDE work on A13 ROMs, A13 moved to FBE (File Based Encryption) which is not supported by 3.18.x kernel and we don't have rn a patch available that could enable it on our kernel version.
Regarding data access, I believe so. Without storage encryption, booting into recovery will already give access to the files. IIRC to this date encryption is fully working only on A11-based ROMs and maybe on some A12 ones.
Okay, so I'm stuck in a boot loop. I flashed the ROM from the link above but the phone won't start up. I just get the Lineage booting screen with the circle moving right to left. I've left it for 15 minutes just in case the first boot was slow but nothing else happens. I've tried to restore my original backup which was Lineage 17.1. It seemed to work, no errors from TWRP but now i just get the Lenovo screen and then it boots to fastboot mode. I flashed Lineage 20 for a second time but the same happened. I tried a different backup from August last year, again it just boots to fastboot.
Any ideas?
Cheers, Si.
EDIT: I've just noticed that I missed out step 3, reboot to recovery between Data wipe and flash ROM.
Now it boots no problem.
Cheers, Simon.
EDIT AGAIN: I still can't revert to either of my previous backups of Lineage 17.1. I would really like to be able to do this. Can anyone suggest why it will only boot to fastboot mode after a seemingly successful restore?
Thank you,
Simon.
@simes303
Don't know what the problem is, but I'd flash stock via fastboot. Then reinstall TWRP and restore LOS.
When things go wrong it's better to start from scratch rather than tinkering around and doing temporary fixes.
how is the battry life anyone?
eried1 said:
@simes303
Don't know what the problem is, but I'd flash stock via fastboot. Then reinstall TWRP and restore LOS.
When things go wrong it's better to start from scratch rather than tinkering around and doing temporary fixes.
Click to expand...
Click to collapse
Hi,
How is this different from flashing stock with TWRP?
Cheers, Si.
Used briefly but battery life seems worse, its like draining. Using 12L Lineage os and its way better.
mahmutpekkara said:
Used briefly but battery life seems worse, its like draining. Using 12L Lineage os and its way better.
Click to expand...
Click to collapse
how long does it last
laggy_boy said:
how long does it last
Click to expand...
Click to collapse
Didn't test much but its way waay noticable, you wouldn't want to use when you see the difference (didn't differ with or without gapps)
btw thx to all devs, using lineage os a12.1 and its good on battery
Battery life for me is considerably better than the Lineage 17.1 that I was using before, no question. I'd estimate almost twice the duration. I'm very happy with this ROM, thanks to all involved in developing it.
Simon.
I've actually just bought a brand new 64 Gb Lenovo P2 pretty cheap from eBay and I will definitely be flashing this Rom onto it.
Thanks again,
Simon.
Hi,
Does this ROM have USB OTG support? I can't get the phone to connect to either my external SSD drive or my bicycle helmet camera since I flashed this ROM. Both these things connected via OTG cable to my phone when I was running Lineage 17.1 and they also connect to the new P2 that I bought recently that still has stock OS. I've tried three OTG checker apps which all state that my phone is OTG compatible.
Thanks, Simon.
March 30th 2023 Release
Changelog:
- Fetch latest Device Tree sources
- Update LOS components webview & zlib
- Sync latest LOS source
- Merge March security patch
- Many more changes
Full change log available on the bottom of this post
Download URLs: GDrive | SF
Enjoy!
simes303 said:
Hi,
Does this ROM have USB OTG support? I can't get the phone to connect to either my external SSD drive or my bicycle helmet camera since I flashed this ROM. Both these things connected via OTG cable to my phone when I was running Lineage 17.1 and they also connect to the new P2 that I bought recently that still has stock OS. I've tried three OTG checker apps which all state that my phone is OTG compatible.
Thanks, Simon.
Click to expand...
Click to collapse
Hello Simon,
Yes, it does have OTG support. IFAIK it should work correctly with both FAT32 and NTFS partition types on external storage devices.