Database Users

[ROM][6.0.1] CyanogenMod 13 for Exhibit/Ace 2e [T599/N/V][METICULUS]

CyanogenMod 13 is a free, community built distribution of Android 6.0 (Marshmallow) which greatly extends the capabilities of your phone, tablet or PMP.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
These are CM13 builds for the Samsung Galaxy Exhibit, and Samsung Galaxy Ace 2e (SGH-T599, SGH-T599N, SGH-T599V). It may cause all the things in the disclaimer to happen, or steal your girlfriend while you are busy flashing ROMs.
GPL:
Code:
<?xml version="1.0" encoding="UTF-8"?>
<manifest>
<project name="Meticulus/android_kernel_samsung_codina" path="kernel/samsung/codina" remote="cm" revision="mm"/>
</manifest>
Warning: Currently, this ROM is an Alpha build and is not stable for daily use.
Download meticulus.co.vu
Gapps: here
Note: For opengapps you must create a config : https://github.com/opengapps/opengapps/wiki/Advanced-Features-and-Options#the-gapps-config-file
And in that file include the skipswypelibs keyword : https://github.com/opengapps/openga...nd-Options#skip-googles-swype-library-setting

Meticulus said:
CyanogenMod 13 is a free, community built distribution of Android 6.0 (Marshmallow) which greatly extends the capabilities of your phone, tablet or PMP.
These are CM13 builds for the Samsung Galaxy Exhibit, and Samsung Galaxy Ace 2e (SGH-T599, SGH-T599N, SGH-T599V). It may cause all the things in the disclaimer to happen, or steal your girlfriend while you are busy flashing ROMs.
GPL:
Warning: Currently, this ROM is an Alpha build and is not stable for daily use.
Download meticulus.co.vu
Gapps: ???[/QUOT
Tried the release dated 20160912. Am using twrp 2.8.0.0.
Flashing just your ROM, things looked pretty good, but got energetic and tried both the pico and nano opengapps.
After installing either of the opengapps zips, the aosp keyboard was so unstable that I could not do any typing.
On my attempt to install ROM and pico gapps at the same time, I got stuck in a boot loop after becoming frustrated with the keyboard issue. Installing ROM rebooting and then going back into recovery, installing gapps and then rebooting, the keyboard failed but so subsequent boot loop.
Still things look promising, please keep up the good work.
If there is anything specific I can do that would provide you with useful information, please let me know.
Thanks again.
Click to expand...
Click to collapse

skyzx said:
Tried the release dated 20160912. Am using twrp 2.8.0.0.
Flashing just your ROM, things looked pretty good, but got energetic and tried both the pico and nano opengapps.
After installing either of the opengapps zips, the aosp keyboard was so unstable that I could not do any typing.
On my attempt to install ROM and pico gapps at the same time, I got stuck in a boot loop after becoming frustrated with the keyboard issue. Installing ROM rebooting and then going back into recovery, installing gapps and then rebooting, the keyboard failed but so subsequent boot loop.
Still things look promising, please keep up the good work.
If there is anything specific I can do that would provide you with useful information, please let me know.
Thanks again.
Click to expand...
Click to collapse
Hmm... Although I have not tried any gapps, I did not expect any issues with them. I have just gotten used to running without gapps. I'll investigate and find gapps that work or fix one up to work..
Note: please do not quote the OP.

Gapps: modified these not to install keyboard related stuff: SEE OP

Haha..i think it can be installed on samsung s iii mini
Sent from my GT-I8190 using XDA-Developers mobile app

Meticulus said:
Gapps: modified these not to install keyboard related stuff:
Click to expand...
Click to collapse
please honor the license and don't mirror (variations of) the opengapps.org pre-built packages.
A better solution is btw to use a gapps-config with the skipswypelibs keyword: https://github.com/opengapps/openga...nd-Options#skip-googles-swype-library-setting

MastahF said:
please honor the license and don't mirror (variations of) the opengapps.org pre-built packages.
A better solution is btw to use a gapps-config with the skipswypelibs keyword: https://github.com/opengapps/openga...nd-Options#skip-googles-swype-library-setting
Click to expand...
Click to collapse
My apologies, I can not correct this ATM but I will as soon as I can...

Thanks for the modified open gapps. Sorry for the trouble I caused.
I'll play around with trying to get the play store added to your release, as soon as my phone recharges. In trying the release, it seemed pretty good, but possibly a bit slow. Your 5.1 version is really very good indeed, fast and with excellent battery life. Please keep up the good work.
Hope I didn't quote things this time.
Sent from my BN Nook HD using XDA Free mobile app

skyzx said:
Thanks for the modified open gapps. Sorry for the trouble I caused.
I'll play around with trying to get the play store added to your release, as soon as my phone recharges. In trying the release, it seemed pretty good, but possibly a bit slow. Your 5.1 version is really very good indeed, fast and with excellent battery life. Please keep up the good work.
Hope I didn't quote things this time.
Sent from my BN Nook HD using XDA Free mobile app
Click to expand...
Click to collapse
It's not your fault... I was unaware of the licensing and I was rushing...

Would it be possible to build this for the SGH-T399N?

Anonymous94 said:
Haha..i think it can be installed on samsung s iii mini
Sent from my GT-I8190 using XDA-Developers mobile app
Click to expand...
Click to collapse
I tried to port it to i8190 and managed to make it boot however its stuck on starting apps screen.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

3liteking148 said:
I tried to port it to i8190 and managed to make it boot however its stuck on starting apps screen.
Click to expand...
Click to collapse
Good luck [emoji6] ....

@Meticulus can you release a new update for this rom? thanks in advance

Hi, i need a kernel for this GT I8090N cyanogenmod 13, can you help me?

I finally had an opportunity to try this alpha build on my SGH-T599N. I used the "cm-13.0-20160912-METICULUS-codinalte.zip" version with the fix-mtp patch.
In general the Meticulus CyanogenMod 13 ROM seemed to function better in speed performance than the Meticulus Carbon LP 5.1.1 ROM for the devices. This was expected and is normal for Android 6.0.1 in relation to Android 5.1.1.
I did find some bugs/issues that do not appear to have been previously mentioned. Those are:
Severe Issues:
At least 3G cellular data does not work. I did not test 2G data. A T-Mobile account with unlimited data (of all classes) was used to test.
Formatting SDCard (maybe also other volumes or attached storage?) fails and corrupts SDCard data. (Fails after displaying 20% progress) The SDCard is also not recognized until reboot (UNTESTED: or maybe reinsertion of SDCard)
Attempting to format SD Card as portable storage via the Settings App ( Storage & USB --> [Clicking o SD Card to Browse SD Card] --> [Invoke Pop-up menu] --> Settings --> Format --> ERASE & FORMAT ) fails partway and returns an error. See attached "Screenshot_Format_SDCard_Failure_Portable_Storage.png" picture for error message.
Attempting to format SD Card as internal storage storage (adopting the storage) via the Settings App ( Storage & USB --> [Clicking o SD Card to Browse SD Card] --> [Invoke Pop-up menu] --> Settings --> Format as internal --> ERASE & FORMAT ) fails partway and returns an error. There is a long delay at 20% progress before failure error is returned. See attached "Screenshot_Format_SDCard_Failure_As_Internal_Storage.png" picture for error message.
Other Important Issues:
Clicking the Back arrow in the Material Design navigation in the "Performance" category of the Settings options results in "Unfortunately, Settings has stopped" (see attached "Screenshot_Crash_Settings_Performance.png" picture for illustration). Using the hardware back button does not result in an error.
"Select USB Configuration" in "Developer options" state resets to "Charging" after reboot. Also, although the USB configuration status may have reset to Charging after reboot, MTP (Media Transfer Protocol) is always used on boot, regardless as to what the "Select USB Configuration" option was previously set to prior to boot.
SELinux not Enforced
Lesser Issues:
Manually Scanning for network operators results in integer numbers provided rather than network names.

SD bug
Hello, i flashed this ROM and dint noticed that i need to format to install apps to the SD card (does not work), this is a big issue since the internal storage is low, ¿there is a a workaround for this? if not, I'll be back to carbon 5.1.1
[edit] how hard in to fix these bugs? (accelerometer stops working, 3G doesn't work, unstable wi-fi, etc) i do not know Java but C++, i really want this rom to be more usable, the os is super fluid compared to 4.1.2 and the UI is beautiful

the website dose not work enymore, can some fix it please?

[7.1.2][UNOFFICIAL] LineageOS 14.1 for Lenovo P2

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 6 (marshmallow), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What's working :
Boots
Touch
RIL [Calls, Mobile Data]
Wi-Fi
Wi-Fi Hotspot
Bluetooth
Camera
Audio
Sensors
Fingerprint
Flash
GPS
NFC
Known issues:
VoLTE doesn't work.
LED.Note: You can use LED with this awesome method: https://forum.xda-developers.com/lenovo-p2/themes/lenovo-p2-rooted-custom-led-t3589859
This is the one of the first builds for p2a42, so minor bugs are expected.Please report them if any.
Instructions :
Flash Twrp :- LINK
Download the latest build and GApps
Reboot to recovery
Flash the latest build and GApps
Reboot
Downloads :
Latest build [19/06/2017]: https://mega.nz/#!KgcS1boY!f1veK_D-kw_8WYDMD9Id0qytacZuHVN3xvQzB7t0SP0
Google Apps: http://opengapps.org/
Credits :
One Team Forum
XDA:Rom Information
LineageOS 14.1,p2a42, ROM for the Lenovo P2
Contributors
wzedlare
ROM OS Version: 7.1.x Nougat
Version Information
Status: Stable
Created 2017-03-18
Last Updated 2017-06-19

#rezerved for me

How to install Root for Apps on Android Nougat Custom Rom
Download and transfer the Lineage SU addon zip file from the download link above to your device’s storage.
Boot your device into TWRP recovery.
Tap on Install and select the Lineage SU addon zip file that you transferred to your device in Step 1.
After selecting the .zip file, do Swipe to Confirm Flash on the bottom of screen to begin the flashing process.
Once Lineage SU addon is flashed, you’ll get Reboot System option, select it.
How to Enable Root for Apps on Lineage OS
Once you’ve installed the Lineage SU addon zip, do the following to enable root for Apps on Lineage OS:
Enable Developer options: Go to Settings » About phone » Tap seven times on Build number.
Go back to Settings main menu and open Developer options from there.
Look for Root access setting, and set it to Apps and ADB or Apps only, as per your need.
That’s all. Your Android device running on Lineage OS should have full root access for apps now.
If you ever need to disable root access, just go to Settings » Developer options » Root access and select the Disabled option from there.
Download;
addonsu-arm64-signed.zip

Great job, no idea how you build new kernel 3.18.31 for lineage14.1

Thank You!

i want to Root LOS 14.1
is it the same way?? or should i do anything more??? !!
i am thinking of SystemRoot..
please give your suggestions ..

nandakis4 said:
i want to Root LOS 14.1
is it the same way?? or should i do anything more??? !!
i am thinking of SystemRoot..
please give your suggestions ..
Click to expand...
Click to collapse
LineageOs AdeenSu
Download And Flashing
Developer Setting>Root

@wzedlare kindly you fix framework folder, it look so ugly with boot oats and boot arts, i have file folder framework to manage throw thems, but make home button not wake up the screen light when it pressed, i hope it will be fix for next release

Thanks! Very good job. It may be crazy but I think I stay with Android 6, because I love the led notifications.
But maybe I will flash it, because who give a F?
Do you need to format as ext4 or other filesystem?...
Will my SD work, it's exfat??
---------- Post added at 13:27 ---------- Previous post was at 13:16 ----------
hendibudi said:
@wzedlare kindly you fix framework folder, it look so ugly with boot oats and boot arts, i have file folder framework to manage throw thems, but make home button not wake up the screen light when it pressed, i hope it will be fix for next release
Click to expand...
Click to collapse
Why not fix it yourself?

hendibudi said:
@wzedlare kindly you fix framework folder, it look so ugly with boot oats and boot arts, i have file folder framework to manage throw thems, but make home button not wake up the screen light when it pressed, i hope it will be fix for next release
Click to expand...
Click to collapse
They(boot.oat) are being generated automatically if you compile any custom rom.Home button wakes up the device, I won't disable that feature.It is useful for everyone.
ilmervanhattem said:
Thanks! Very good job. It may be crazy but I think I stay with Android 6, because I love the led notifications.
But maybe I will flash it, because who give a F?
Do you need to format as ext4 or other filesystem?...
Will my SD work, it's exfat??
---------- Post added at 13:27 ---------- Previous post was at 13:16 ----------
Why not fix it yourself?
Click to expand...
Click to collapse
You don't have to format anything.Just make your wipes and flash it.

ilmervanhattem said:
Thanks! Very good job. It may be crazy but I think I stay with Android 6, because I love the led notifications.
But maybe I will flash it, because who give a F?
Do you need to format as ext4 or other filesystem?...
Will my SD work, it's exfat??
---------- Post added at 13:27 ---------- Previous post was at 13:16 ----------
Why not fix it yourself?
Click to expand...
Click to collapse
I am sorry, i just junior member on xda, i didn't mean that, i just want to give little contribution to revive our community user p2 experience

WiFi is not working here...
When I turn on WiFi it turns off instantly...
Fawk
I've used the 'super' version of gapps for 7.1 (64bits) btw. Also tried it with TWRP 3.0.2.0 and the aroma installer of gapps, same WiFi error.

Hi there, i am thinking of buying this device for my gf because she needs something with a ****load of battery power. So this device seems the obvious choice. But i have a question:
i noticd that on every rom there is no led and no fingerprint. Is this something that will be added in the future or is it not possible due to unavailabe firmwares?
Kind regards

DDQW said:
Hi there, i am thinking of buying this device for my gf because she needs something with a ****load of battery power. So this device seems the obvious choice. But i have a question:
i noticd that on every rom there is no led and no fingerprint. Is this something that will be added in the future or is it not possible due to unavailabe firmwares?
Kind regards
Click to expand...
Click to collapse
I couldn't fix them, that's my fault.It is not caused by firmware or something.I don't know what will happen in the future.
ilmervanhattem said:
WiFi is not working here...
When I turn on WiFi it turns off instantly...
Fawk
I've used the 'super' version of gapps for 7.1 (64bits) btw.
Click to expand...
Click to collapse
Flash stock rom and use it for ten minutes, wipe data,system,cache,dalvik cache (don't wipe your internal storage, wiping it causes bugs.), then flash the rom.

wzedlare said:
Flash stock rom and use it for ten minutes, wipe data,system,cache,dalvik cache (don't wipe your internal storage, wiping it causes bugs.), then flash the rom.
Click to expand...
Click to collapse
OK my friend.
Got some error and passcode error when restoring. Will try some things and talk to you later.
UPDATE: wifi is working but have to root.
UPDATE: Rooted with version 2.79
UPDATE: Now restoring 484 apps with Titanium Backup
UPDATE: ROM is working smooth af, for how much I experienced by now

i was wondering why i couldnt get gapps to install , then realised i was trying to install the wrong version lol

The Mero said:
i was wondering why i couldnt get gapps to install , then realised i was trying to install the wrong version lol
Click to expand...
Click to collapse
7.1 > arm64 > choose whatever you want, pico is the smaller zip.

cpu-z is saying governor is stuck on performance .. constantly running at 2016mhz on all cores .
Is it possible to change it to dynamic ?

The Mero said:
cpu-z is saying governor is stuck on performance .. constantly running at 2016mhz on all cores .
Is it possible to change it to dynamic ?
Click to expand...
Click to collapse
Use a kernel editor?

which one would be safe / recommend to use ilmervanhattem ?
I wouldnt have a clue where to start ,

[ROM]ResurrectionRemixOS 5.8.5[v1.6][FINAL][09.27.17] by @Zormax

Announcement:
Code:
[LIST]
[B]V1.6 is now available[/B]
[/LIST]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Resurrection Remix 5.8.5 FINAL Zormax [OPTIMIZED]​Lenovo A7010(A7010a48)​
Code:
#include
/*
* Your warranty is now void.
* And other random stuff no-one reads.
*/
Heres the official thread of the ROM
http://lenovo-forums.ru/topic/23481...mix-583-android-71-custom-rom/#comment-549294
----------------------------
?Version 1.6 Final Download Link
?Alternative Link
By Helton Vezzoni (G+)
?GDrive
?https://drive.google.com/file/d/0B5KCs6JXlcE7b05ZZVVFRFQtNk0/view?usp=sharing
-----------------------------
If you want to flash this, just go to link given in top to read instruction, flashing procedures is not be like in mohan's roms and anything you try. Better to visit official lenovo ru link for more information.
[*]Flashing RROS v1.1UP rom (recommended boot2sd.img and System.img)
[*]Tick flash zip, flash system to system image, bootsd to boot
[*]After that, flaash recoveryN1
[*]target partition to recovery then reboot to recovery
[*]Flash addons gapps or download mini gapps, if you want root flash su
[*]reboot to system
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
Upgrade from new build? Here
* Flash system to system img
* Flash gapps (newer version) and root (magisk or su)
* If you have mods on last build, flash it (Dolby, Magisk, Song Framewrk etc.)
* Wipe cache and dalvik
* Reboot
* Done
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Note!
[*]Dont go back from any old twrp, this might be removed your existing twrp recovery, stay on 3.1.1 by sevenmaxs
[*]If you want to go back to old twrp, just flash any nougat/marsh roms that not came from zormax (los13 is not like this), after you go back to other rom, you can now change your curent rom to gold or any you want twrp recovery build.
[/B]
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
New Fixes
Discover: 05-23-17
Problems:
* If you flash twrp gold in latest sevemaxs 3.1.1 twrp and youre running in RROS Zormax, your current twrp will gone after you reboot.
Fixed
* If you got this problem, just flash recoveryN1 (Replace name to recovery.img) via ADB, if you know how to flash the twrp just go, if you dont know search on tutorial on youtube.
Issues:
* TWRP 3.1.1 is the only custom recovery can support in this ROM, so if you replace or flash any recovery that not came by zormax, your TWRP will gone.
*
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------
DualBootPatcher Support (Not officially supported by developer)
* If you have problem to adding this rom in Dualbootpatcher, you may add this in the end of build prop
Add "ro.patcher.device=A7010a48" to end of your build.prop,
save and reboot
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
MOD's
Dolby Atmos from Ahrion>https://forum.xda-developers.com/android/apps-games/soundmod-axon-7-dolby-atmos-t3412342
Dolby r6.5
Magisk 13.0>https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Changelog:
Code:
[LIST]
[B]
New Update 1.6
1. Added Ambient Display Patched
- Security patches as of September 5 blueborne
2. PA ColorEngine (Theme)
3. 5.8.5 Tag
V1.5
1. Updating the RR to version 5.8.4
2. Security patch from August 5
3. RR code of August 27
4. Ambient Display (Lite version)
5. New settings in "Advanced settings"
6. New libraries of cameras
7. New application "Camera" with improved mode of video recording in low light, pause during video shooting and other parameters
8. Stereo audio recording during video recording (not tested)
V1.4
* Fix sim2 signal
* Synchronize latest RROS changes
V1.3
* New camera libs
* USB Tethering fixed
* RR Sync (06=23)
V1.2
* Merged Android_7.1.2-r17
* June Security patch
* New camera libs
* Add VR mode
* Fixed Night Mode (Nightlight)
* Added powerprofile patch
* Wifi Display
* Synchronize latest rros and los changes (06-15-17)
V1.1
- Offline charging / charging fixed
- Priority of LED notifications
- Support for MTP in recovery
- New GPS Driver
- Support for ANT +
- Updating the RR code from 05/26/2017
- On the lock screen, in real time shows the current and charge voltage:
[/B]
[/LIST]
Creditos:
Zormax -Official OP
Version Information
Resurrection Remix ROM by Zormax, for A7010 & K4 Note
ROM Updated: 08-28-17
Thread Updated: 06-28-17
Author/Developer : @Zormax
Based On : Nougat LineageOS
Thread Created : 05-21-17

Is the fingerprint not working???

Guys,
Im on now in this rom, i will give feedback after several testing.
Thankyou,..

So far all is ok
* Camera with all 13MP/8MP with 16:9/4:3 ratio
* Network is working
* Wifi is working
* Video recording is fully working
* Fingerprint is working
* GPS is working
* Compass is working
* Overall sensors is working
other stuff is working like on stock
idk if Calling/in-call/received messages/incoming messages is working, but i think is working
I send my SC after i restore my titanium backup!!
SYSTEM UI CRASH- after i restore backup from titanum and reboot... idk why.. i send a report to zormax..

edarick said:
So far all is ok
* Camera with all 13MP/8MP with 16:9/4:3 ratio
* Network is working
* Wifi is working
* Video recording is fully working
* Fingerprint is working
* GPS is working
* Compass is working
* Overall sensors is working
other stuff is working like on stock
idk if Calling/in-call/received messages/incoming messages is working, but i think is working
I send my SC after i restore my titanium backup!!
SYSTEM UI CRASH- after i restore backup from titanum and reboot... idk why.. i send a report to zormax..
Click to expand...
Click to collapse
Hai ..can you pls tell me the installation procedure for this rom

Ganesh.V said:
Hai ..can you pls tell me the installation procedure for this rom
Click to expand...
Click to collapse
1. Make the backup: system, data, not boot, recovery
2. For those who want a USB flash drive in the system, only the external (internal space will be involved under all application), then you have to move everything from the internal to the external USB drive.
3. Download the firmware, download the addon.
5. Extract both archives and put them on the external card contents.
6. Reboot into recovery.
7. Making wipes are: dalvick, data, cache, system (and if nvdata recovery 3.0.2-3 and above)
8. Set "as the img" after recovery: boot_2sd.img as the "Boot" and system.img as the "System image", for those who want one card in the system, set boot_1sd.img - for a place boot_2sd.img
9. Also, be sure to put a new recovery: recoveryN1.img
10. In recovery main menu, do a reboot back into recovery.
11. Install open_gapps ******. Zip and ROOT_SuperSU *****. Zip
12. loaded in the system set up.

abidifethi said:
1. Make the backup: system, data, not boot, recovery
2. For those who want a USB flash drive in the system, only the external (internal space will be involved under all application), then you have to move everything from the internal to the external USB drive.
3. Download the firmware, download the addon.
5. Extract both archives and put them on the external card contents.
6. Reboot into recovery.
7. Making wipes are: dalvick, data, cache, system (and if nvdata recovery 3.0.2-3 and above)
8. Set "as the img" after recovery: boot_2sd.img as the "Boot" and system.img as the "System image", for those who want one card in the system, set boot_1sd.img - for a place boot_2sd.img
9. Also, be sure to put a new recovery: recoveryN1.img
10. In recovery main menu, do a reboot back into recovery.
11. Install open_gapps ******. Zip and ROOT_SuperSU *****. Zip
12. loaded in the system set up.
Click to expand...
Click to collapse
Thank you...

In this rom, can we switch the network to lte only, or 3g only? Because in the other cusroms i can't do that.

Ask
abidifethi said:
1. Make the backup: system, data, not boot, recovery
2. For those who want a USB flash drive in the system, only the external (internal space will be involved under all application), then you have to move everything from the internal to the external USB drive.
3. Download the firmware, download the addon.
5. Extract both archives and put them on the external card contents.
6. Reboot into recovery.
7. Making wipes are: dalvick, data, cache, system (and if nvdata recovery 3.0.2-3 and above)
8. Set "as the img" after recovery: boot_2sd.img as the "Boot" and system.img as the "System image", for those who want one card in the system, set boot_1sd.img - for a place boot_2sd.img
9. Also, be sure to put a new recovery: recoveryN1.img
10. In recovery main menu, do a reboot back into recovery.
11. Install open_gapps ******. Zip and ROOT_SuperSU *****. Zip
12. loaded in the system set up.
Click to expand...
Click to collapse
Bro, what the mean exactly, i dont understand step no 2 and 8 ??

support a7010a48 ?

lek669 said:
support a7010a48 ?
Click to expand...
Click to collapse
Yes..try it

Sc

Awesome ROM N
Some Feedback for Awesome ROM i've tasted
1. I've faced rotation not work, tried turn on and turn off still not work, wipe and restarts 3 time still not work, please fix bro,
2. There's no ambient display, hoping present in next update
I love this ROM, sound speaker is amazing like stock ROM when I flash Dolby atmost,
hoping you release new version withaut anything change in SoundMod, 'cause its great
Thanks for amazing rom

Imam mustofa said:
Some Feedback for Awesome ROM i've tasted
1. I've faced rotation not work, tried turn on and turn off still not work, wipe and restarts 3 time still not work, please fix bro,
2. There's no ambient display, hoping present in next update
I love this ROM, sound speaker is amazing like stock ROM when I flash Dolby atmost,
hoping you release new version withaut anything change in SoundMod, 'cause its great
Thanks for amazing rom
Click to expand...
Click to collapse
Post your report in official dev page.. go to page 1

edarick said:
Post your report in official dev page.. go to page 1
Click to expand...
Click to collapse
In lenovo.forum??

Imam mustofa said:
In lenovo.forum??
Click to expand...
Click to collapse
Yeah

Android O Sub theme

edarick said:
Android O Sub theme
Click to expand...
Click to collapse
Bro can you rotate phone? Tried Play Movie from MXplayer is not work

Rotation is not working (2/32GB variant) any idea?

Here is the sc of rotation

[ROM][OFFICIAL][laurel_sprout] Syberia Project [12L][OSS]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* Syberia Team not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications.
*/
Read the whole OP! Be respectful to each other and don't ask for ETAs, it's considered as being rude!
Syberia Project (aka Syberia OS) is a custom ROM for Xiaomi MI A3 that implements various features. This project was designed by our "Syberia Team" from scratch based on AOSP source code with some CAF fixes and improvements. Our team: @DennySPB, @blinoff82, @alexxxdev. Also many thanks to our designers @rlshukhov and @a18h for logos, wallpapers and bootanimations.
If you like our work you can buy us a cup of coffee or a glass of beer
Here
Code:
Monet
VoLTE, VoWiFi
LineageOS LiveDisplay
MicroG support
Pocket Judge
Call recording
Statusbar items switches
Three finger swipe to screenshot
Extended powermenu
...Settings and features will be gradually added.
SyberiaOS ROM Download
Recovery Download
Magisk Download
First time clean installation:
Code:
- Unlocked bootloader is required!
- You must have installed FW11 based ROM.
1 - Boot your device into fastboot mode:
adb reboot bootloader (or power off and power on again
while pressing Power + Vol Down)
2 - Flash Syberia recovery via fastboot
fastboot flash boot <name of the file>
3 - Reboot to recovery
4 - Perform factory reset (formatting data is important)
5 - Here you have 2 choices to install rom
1) Install > Sideload from ADB
on PC open terminal and type - adb sideload <rom zip name>
2) Install > install from sdcard or OTG
Just copy rom to the sdcard or OTG and install from it.
6 - Reboot to system, wait until rom booted, then reboot
in recovery again.
7 - Now you can install other zips (gapps, magisk etc) if needed by
using the methods described in the 5'th line of guide.
8 - If you flashed gapps, factory reset once more is a Must!
Updating:
Code:
1. Reboot into recovery
2. Here you have 2 choices to install rom
1) Install > Sideload from ADB
on PC open terminal and type - adb sideload <rom zip name>
2) Install > install from sdcard or OTG
Just copy rom to the sdcard or OTG and install from it.
3. Reboot to system
Code:
- You tell me only with logcat (screenshots)
Attention! We are not responsible for the operability of your device if you use third-party kernel, Xposed Framework or unverified Magisk modules.
Official website
Syberia Project Github
Syberia Project Gerrit
Device Source
Kernel Source
Official Telegram Group
Announcements Telegram Group
Development Telegram Group
Device Support Group
Code:
- LineageOS
- AOSPA (aka Paranoid Android)
- Nitrogen Project
- Benzo Rom
​

Update 11/07/2022
Changelog:
Fixed GPS logspam after caf update.
Updated GPS blobs to a12.
Updated GPS stack to LA.UM.9.11.r1-05600-NICOBAR.QSSI12.0
Ported DolbyAtmos from MOTO G PRO.
Implemented VPN tethering support.
Fixed QS clock size and placement.
Bring back "old" style QS brightness slider (temporary, until new style is fixed).
Spoiler: Archive
Update 30/06/2022
Changelog:
Removed mic boost.
VoiP changes.
Added keylayout for wired headphones.
Again increased haptics a bit.
Dropping prebuilt camera stack and building OSS camera stack.
Reworked Syberia UI Style.
Notes:
This build contains big changes for UI, so to avoid issues "clean flash" recommended
Update 01/06/2022
Changelog:
Implemented UDFPS dim layer (no brightness flicker)
Another VOiP fixes.
Added custom UDFPS animations and icons.
Added missing FM radio.
Increased haptics strength a bit.
Improved UDFPS scanning speed.
Update 17/04/2022
Changelog:
Improved boot time for ~3sec.
Fixed some system errors from log spam.
Added new NTP servers for faster Location.
Improved GPS stability and accuracy.
Enabled LiveDisplay HAL for picture adjustment.
Improved UDFPS callback delay’s.
Lowered size of UDFPS scan circle-point (theoretically this change should increase scanning speed but requires a good finger scan)
Imported from stock Health HAL (fixes charging calculations)
Upstreamed kernel to 4.14.275
Selinux Enforcing
Update 28/09/2021
Changelog:
Initial Build
Switched to ICE FBE encryption
Vendor updated to CAF LA.UM.9.11.r1-04500-NICOBAR.0 (except camera, audio, gps and DRM)
Switched to AOSP BT impl
Bugs:
Some modes in MIUI camera are not working

Reserved

This is fantastic!
But no matter what I do I can't install even core gapps. I flash them via adb sideload, perform a factory reset and nothing.. I feel like I've tried everything. There's no problem with Magisk tho. Can you please include some gapps in the rom?

Amazing news! Official ROM and latest Android version!
Hopefully the permissive SELinux can be sorted out with enough logs, but still, very nice work so far.

Does anyone can help me about the recovery via fastboot installation? I mean is there need to change slot e.t.c... And after recoverie's flashing, how we reboot to recovery, via a simple fastboot command?Thanks.

jeff.rey said:
This is fantastic!
But no matter what I do I can't install even core gapps. I flash them via adb sideload, perform a factory reset and nothing.. I feel like I've tried everything. There's no problem with Magisk tho. Can you please include some gapps in the rom?
Click to expand...
Click to collapse
Yeah, a12 not so fast at gapps bringup, we have limited chose to BitGapps, Nikgapps or FlameGapps, and Nikgapps with FlameGapps have some issues while flashing it on some devices (already reported to the dev), and only BitGapps works fine, but there are only Minimal package.
However i created a modified Nikgapps(stock) package - download

papafan said:
Does anyone can help me about the recovery via fastboot installation? I mean is there need to change slot e.t.c... And after recoverie's flashing, how we reboot to recovery, via a simple fastboot command?Thanks.
Click to expand...
Click to collapse
Generally speaking, IMHO doesn't matter how you got into recovery be it by command or power+vol+

maluus said:
Generally speaking, IMHO doesn't matter how you got into recovery be it by command or power+vol
Click to expand...
Click to collapse
And the slots? Is there any need to change them during flashing?

papafan said:
And the slots? Is there any need to change them during flashing?
Click to expand...
Click to collapse
When you flash something over fastboot you are to manage slots. When you do by recovery it manages slots. So up to flashing the recovery you'll manage slots. Afterwards flashes are done by recovery. Since recovery changes slots when you flash rom or update. Both slots should have the same firmware level (e.g. android 11 firmware.) If you have incompatible firmware on other slot it may cause problems on next update or full flash. IMHO op should explain a bit more about slot management. The same process is known to cause unwanted problems before. You can check the lineageos 18.1 oss thread for it.

Magicxavi said:
Update 28/09/2021
Changelog:
* Initial Build
* Switched to ICE FBE encryption
* Vendor updated to CAF LA.UM.9.11.r1-04500-NICOBAR.0 (except camera, audio, gps and DRM)
* Switched to AOSP BT impl
Bugs:
* Some modes in MIUI camera are not working
* Selinux Permissive
Click to expand...
Click to collapse
Hi,
Is it possible to safely install this ROM from android 10 stock EU version? (or, must I already be under A11 and in this case what should I do?)
I'm still stuck on A10 and the September 2020 security patch on my French version of the Mi A3
Sorry I'm a beginner

I think you must first update to a11. Do factory reset on your a10 first.

NikBos said:
I think you must first update to a11. Do factory reset on your a10 first.
Click to expand...
Click to collapse
Problem is that I still do not have the possibility to do OTA to A11...
In France we are literally blocked on A10 and the September 2020 security patch...

Then you can flash it with mi flash.

NikBos said:
Then you can flash it with mi flash.
Click to expand...
Click to collapse
I don't understand what to do in order not to lose my data, I would just like to update.
If I want to install the update without fear I have to make a backup. OK
To make a full backup I need TWRP. OK
To install TWRP to be able to make my backup and not lose any data I have to root my device with magisk. OK
If I root my device with magisk it makes me wipe all my data...

Hobbi1 said:
I don't understand what to do in order not to lose my data, I would just like to update.
If I want to install the update without fear I have to make a backup. OK
To make a full backup I need TWRP. OK
To install TWRP to be able to make my backup and not lose any data I have to root my device with magisk. OK
If I root my device with magisk it makes me wipe all my data...
Click to expand...
Click to collapse
If I were you I wouldn't rely on twrp for backup. Because once you update to A11 you ll have problem with twrp hence restoring it. On the other hand even if you are able to restore it somehow, probably you would end up with a bootloop anyway. Because when android version changes, data partition backup of other versions won't be compatible with newer one. I suggest you to have per app backup within os.

New update is out!

New update is out!

everything working fine, new icons and animations for udfps are pretty good and now it recognizes really fast. one thing i noticed is that the screen flicks when unlocking with figngerprint but just a little bit, its not something that really bothers as before. updating was fine without even needing to make a backup. anyways ty for, basically, the best rom for mi a3, if it wasnt that, i think we all would have already changed it. keep up the good work!

I just did the installation and the rom is fantastic!
Leaving Miui..
Everything seems to work very well.
Congratulations to those involved!!
Sorry for my english, I'm from Brazil

[ROM][13.0][OFFICIAL] SparkOS [AOSP][STABLE][30/05/2023]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SparkOS is an AOSP based ROM, packed with many features without sacrificing stability and performance.
In short a fully functional operating system as stable and customizable as it should be.
Code:
/* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Device Specific Issues:
• None
Requirements
• You must be on Latest firmware v11.0.3.0 or v11.0.2.0
• You must use any of the recommended recovery (links are given below).
Downloads
Get the latest SparkOS Build for vince: Download
Firmware: https://xiaomifirmwareupdater.com/firmware/vince/
Nikgapps: https://nikgapps.com/
Mindthegapps (Use arm64 only): http://downloads.codefi.re/jdcteam/javelinanddart/gapps
Magisk: https://github.com/topjohnwu/Magisk/releases
Recommended Recoveries:
- TWRP by Starlight
- Orangefox R11.0 Beta
- Read the latest changelogs from: Here
Notes
• Build type: User
• Encryption not supported, Decrypted by default
• Selinux is Enforcing
• FMRadio Included
• Do not flash recovery.img available on the spark download website
Flashing Instructions:
Clean flash (Coming from a different ROM):
• Download ROM
• Download Custom Google Apps Package (Like Nikgapps core/basic or Mindthegapps) if the ROM is Vanilla variant (On GApps ROM variant Google Apps are included, don't flash a separate Custom Google Apps package)
• Reboot to Recovery.
• Wipe System, Data, Vendor, Cache, Dalvik/ART cache partitions
• Flash latest stable firmware v11.0.3.0 before flashing ROM
• Flash ROM zip
• Flash Custom Google Apps Package if the ROM is Vanilla variant
• Reboot to system
To get root access, Reboot to recovery after ROM setup and flash Magisk.zip
BOOTLOOP SITUATION: If you are coming from stock/custom MIUI or any ROM which had data ENCRYPTION, you will face bootloop and can not boot into the system. In such case you need to FORMAT data after flashing the ROM. Otherwise the ROM won't boot (Read detailed instructions from here)
Dirty flash (Updating to a newer build):
• Download the new update ROM zip
• Reboot to recovery
• Do not wipe anything
• Flash the new update ROM zip
• Flash the same Custom Google Apps Package again you flashed before (For vanilla users)
• Flash Magisk again if you are rooted before (For rooted users)
• Wipe Cache and Dalvik/ART cache
• Reboot to system
Important note regarding SparkOS 13.6 update
This is a huge rebase of the ROM's source code after the March update, So Clean flash is MANDATORY for all users. Some bugs from previous versions have been fixed in this version and some new features can be noticed. Some customizations have been temporarily removed (eg: Smart charging, QS row & column customisation etc) and will be added in future releases (Read official community post).
You should be aware of some known source bugs in this release before updating to 13.6. These bugs are not device specific and are present in all Spark official devices which will be fixed in the next update.
Known bugs are;
1. Launcher settings are crashing with light theme (works fine with dark theme). You can use a different Launcher but I think Pixel launcher Extended will not work anymore as spark is now completely based on lineage
2. Shortcut buttons glitches in recent panel.
3. Visual glitch on Quicksettings/Statusbar after a reboot (Restarting SystemUI fixes it for now)
Join our Telegram Group https://t.me/SparkOSChannel
Buy me a Coffee https://paypal.me/spyroskal
See our website https://spark-os.live/
Device Support Group https://t.me/anandhansprojects_chat
Source Code
SparkOS http://github.com/Spark-Rom
Device Tree and Vendor Tree https://github.com/Spark-Devices
Kernel Tree https://github.com/aospa-vince/android_kernel_xiaomi_vince
ROM OS Version: Android 13.0
Spark-OS Version: Android 13.6
Security Patch Level: May 2023
ROM Kernel: Linux 4.9.x
Stable Release Date: 30.05.2023
Latest Release Date: 30.05.2023

This is great. Seems to run well - but can't get it to play nice with Viper4Android.

droident said:
This is great. Seems to run well - but can't get it to play nice with Viper4Android.
Click to expand...
Click to collapse
No issues with viper4Android here.
Check if you've rooted properly?
Or maybe you are using a mod version of viper4Android.

Been using it for half a year and it's the best Android 13 rom I tried (not that there's many that are up to date)

anandhan07 said:
No issues with viper4Android here.
Check if you've rooted properly?
Or maybe you are using a mod version of viper4Android.
Click to expand...
Click to collapse
I used the repackaged v4a from github. Clearly something went wrong here if it's working at your end. I'll try again later when I'm home as I'll need to install from scratch having reverted to A12. Guessing maybe I just needed to reboot again or something. Here's the version I used:
GitHub - programminghoch10/ViPER4AndroidRepackaged: A refined ViPER4Android installer.
A refined ViPER4Android installer. Contribute to programminghoch10/ViPER4AndroidRepackaged development by creating an account on GitHub.
github.com
I have to say the smooth responsiveness on these new A12/A13 ROM builds is surprising given how often A11 would lock up for me. Maybe my device just finally needed a reset idk.

OK. Mystery solved. Turns out that Viper4Android does indeed work - it just needed an extra reboot.
So I flash it > reboot > v4a App appears on next boot but doesn't work > reboot again > v4a works.
Weird but makes sense. Sorry for the confusion.

I couldn't receive this kind of google login authorization on this rom "is it you trying to sign in". Device wasn't appearing in google account double verification. No problem in a13 elixir.
Also sadly no option 2g connectivity.
Rom itself seems smooth. ATM moved back to A10

I have problem, the screen show on/ off at redmi boot logo

CPU cores seam to be locked to 1400 mhz

Hello İ installed latest Spark OS gapps build on my a205f i loved the rom but it has a bug phone screen freezes cant close the screen no reaction to calls,notifications,holding down the power button the only solution is to wait for the battery drain it happened 2 times what can i do i guees this build is laggy

This is possibly a long shot but any chance of modified files for higher quality audio on Bluetooth SBC (or AAC)? It used to be you could patch it in via Magisk but the module no longer works on newer android versions and if I'm correct the edits need to be made before a ROM is built. If you're able to, any chance of some experimental files for me to try out?
I think the values are in a2dp_sbc_encoder for SBC, a2dp_aac for AAC. A2DP_XXX_DEFAULT_BITRATE 000 where XXX is SBC or AAC and 000 is the bitrate in kbit/s.

Mr.Bra said:
Hello İ installed latest Spark OS gapps build on my a205f i loved the rom but it has a bug phone screen freezes cant close the screen no reaction to calls,notifications,holding down the power button the only solution is to wait for the battery drain it happened 2 times what can i do i guees this build is laggy
Click to expand...
Click to collapse
This is sparkos for vince aka Redmi 5 plus. Not for a205f

droident said:
This is possibly a long shot but any chance of modified files for higher quality audio on Bluetooth SBC (or AAC)? It used to be you could patch it in via Magisk but the module no longer works on newer android versions and if I'm correct the edits need to be made before a ROM is built. If you're able to, any chance of some experimental files for me to try out?
I think the values are in a2dp_sbc_encoder for SBC, a2dp_aac for AAC. A2DP_XXX_DEFAULT_BITRATE 000 where XXX is SBC or AAC and 000 is the bitrate in kbit/s.
Click to expand...
Click to collapse
will see

Latest Vince just got released yesterday - thank you
https://sourceforge.net/projects/sparkosofficial/files/vince/Spark-13.3-Official-vince-20230105-gapps.zip/download

Hi,
I installed this rom, until I see it I'm liking it, but the screen rotation doesn't work.
Any idea?
Thanks...

Hello everyone, just flashed this ROM on my Vince (coming from Elixir 3.3 - A13).
Since I use this phone to debug my apps, I need to connect Chrome DevTools to it.
What I've done so far:
- wiped everything
- installed Spark-13.3-Official-vince-20230105-gapps
- installed Magisk 25.2
- registered my Google account
- updated all apps (through Play Store)
- enabled Developer options, then USB debugging
Now, when I launch Chrome DevTools on PC, I can see the phone but the webpages list is empty; it also doesn't show any WebView instance (see the screenshot below).
Remote debug was working with Elixir 3.3 on the same phone and PC, so I suppose the difference is in some ROM setting... something to be changed here, but I'm out of ideas...
Does anyone have any suggestions about this?

maxi_power said:
Hi,
I installed this rom, until I see it I'm liking it, but the screen rotation doesn't work.
Any idea?
Thanks...
Click to expand...
Click to collapse
First, make sure you have enabled auto rotate screen option. It is disabled by default.
If it's enabled send a screenshot from sensor test app (available in playstore). ROM doesn't have issues auto rotates screen.

nicorac said:
Hello everyone, just flashed this ROM on my Vince (coming from Elixir 3.3 - A13).
Since I use this phone to debug my apps, I need to connect Chrome DevTools to it.
What I've done so far:
- wiped everything
- installed Spark-13.3-Official-vince-20230105-gapps
- installed Magisk 25.2
- registered my Google account
- updated all apps (through Play Store)
- enabled Developer options, then USB debugging
Now, when I launch Chrome DevTools on PC, I can see the phone but the webpages list is empty; it also doesn't show any WebView instance (see the screenshot below).
View attachment 5804415
Remote debug was working with Elixir 3.3 on the same phone and PC, so I suppose the difference is in some ROM setting... something to be changed here, but I'm out of ideas...
Does anyone have any suggestions about this?
Click to expand...
Click to collapse
Can you send logcat?
I am not using this feature. I will test this later.

anandhan07 said:
First, make sure you have enabled auto rotate screen option. It is disabled by default.
If it's enabled send a screenshot from sensor test app (available in playstore). ROM doesn't have issues auto rotates screen.
Click to expand...
Click to collapse
Hi, thanks for the answer.

maxi_power said:
Hi, thanks for the answer.
Click to expand...
Click to collapse
Seems like you messed up persist
So flash persist.img via recovery (in persist partition) and reboot into system. Do not wipe anything.
Link of pesrist.img: https://t.me/anandhansprojects_chat/15693