Hi every one. I m facing this problem when i try to flash oppo f1s . I have downloaded too many firmwares from different websites but every rom giving this error.
When download bar completed in sp flash tool then it got stuck and after 50 to 60 seconds this error comes. I need help how to fix it?
Error solving method
mfaraz1000 said:
Hi every one. I m facing this problem when i try to flash oppo f1s . I have downloaded too many firmwares from different websites but every rom giving this error.
When download bar completed in sp flash tool then it got stuck and after 50 to 60 seconds this error comes. I need help how to fix it?
Click to expand...
Click to collapse
That usually happens due to overload of firmware's or error in detection etc,
method to fix:Get the scatter file:
Flash tools step1:
1) Just copy the below code and rename it as .txt and use it as the scatter file.
2) Have the preloader file=preloader_oppo6750_15131.bin -> this is the version of preloader.
3) Get the system image of the oppo f1s stock rom.
4) Open flash tools , locate scatter file and open it,
->make sure bot the files system image and preloader are properly loaded.
5) Run flash tools to "Format + download" , Connect phone to pc ("Hold volume + and - at the same time and connect the usb cable and wait until detection is complete.
6)when done proceed to step 2
download tools step 2:
1) open download tools.exe, have the scatter file already download, click on download all.
2) The Green icons turn blue, wait for the process to complete,
3) Reboot
The files required are in particular places but just search for the yakub method on google,you will get the files for the oppo f1s,
I had this haappen to me and i was able to fix it using this method.
stasus_ext_ram_exception
meteemp said:
That usually happens due to overload of firmware's or error in detection etc,
method to fix:Get the scatter file:
Flash tools step1:
1) Just copy the below code and rename it as .txt and use it as the scatter file.
2) Have the preloader file=preloader_oppo6750_15131.bin -> this is the version of preloader.
3) Get the system image of the oppo f1s stock rom.
4) Open flash tools , locate scatter file and open it,
->make sure bot the files system image and preloader are properly loaded.
5) Run flash tools to "Format + download" , Connect phone to pc ("Hold volume + and - at the same time and connect the usb cable and wait until detection is complete.
6)when done proceed to step 2
download tools step 2:
1) open download tools.exe, have the scatter file already download, click on download all.
2) The Green icons turn blue, wait for the process to complete,
3) Reboot
The files required are in particular places but just search for the yakub method on google,you will get the files for the oppo f1s,
I had this haappen to me and i was able to fix it using this method.
Click to expand...
Click to collapse
I'm having this same mistake with the Leagoo Kiicaa Mix, could you help me?
mfaraz1000 said:
Hi every one. I m facing this problem when i try to flash oppo f1s . I have downloaded too many firmwares from different websites but every rom giving this error.
When download bar completed in sp flash tool then it got stuck and after 50 to 60 seconds this error comes. I need help how to fix it?
Click to expand...
Click to collapse
uncheck the following given file names in the error box from the list of files one by one, the error will be solved
Oppo F1s A1601 IMEI.info: MediaTek MT6750 Firmware | Flash solution
OPPO F1s A1601 solution
Related
How to restore the Stock ROM:
For Grand X ProOK, today I'll be showing you how to restore the Grand X Pro back to Stock, just as it was before you flashed the custom ROM...
You will need:
A PC Running Windows 7 (ONLY WIN 7 WORKS FOR NOW)
The Grand X Pro
A USB Android Cable
My FlashTool
ZTE VCOM Preloader Drivers MT6577
So , first get the full flashtool from here: ApeelMe's Blogspot - ZTE Grand X Pro FlashTool
Also install the Preloader drivers if you didn't do so...
Plug in the Grand X Pro and then turn it off...
It should (on the PC) install some drivers and fail , don't worry...
Open flashtool and select the NandUtil file and the Scatter file (nandutil.bin and mt6577_scatter.txt , their names are like that)
In the menu where you can select ANDROID , RECOVERY , BOOT , MBR, DSP , Preloader , etc DON'T Touch anything as it will wipe that partition and you may hard-brick your device..
Click "Download" in flashtool, wait till the green circle...
After the green circle appears , close flashtool and disconnect the phone.
Now turn it on, good ol' stock ROM...
Hope this works for you as it did work for me...
TeamMaverick
it didn't work for me, it completes the download and evrything but it still just stands on zte sign an that is it, can you help?
trying to use but i get a nandutil.bin file is not a valid da format. Is it corrupted?
Anyhowse. i went ahead and flshed with all in one. im now with cyanogenmod and cwm which is the opposite of what i needed. How can I return to stock rom and stock recovery? basically i need to send it back to shop because of faulty screen.
Resolved. Followed guide with link here
http://apeelme.blogspot.no/2013/08/zte-blade-super-gyari-allapot.html?m=1
how did you manage to follow he steps in flash tool to find download agent and scaterr file, the all thees ebr1, and the rest....i have done everything FAILED, it didn't change nothing same thing like with the solution in this post
majmun123 said:
how did you manage to follow he steps in flash tool to find download agent and scaterr file, the all thees ebr1, and the rest....i have done everything FAILED, it didn't change nothing same thing like with the solution in this post
Click to expand...
Click to collapse
Didn't have any problems followed these steps:
1. run Flash_tool.exe from desktopfolder (maybe try run as admin if a problem)
2. select File-open scatter loading file
3. select MT6577_Android_scatter_emmc.txt from restore to stock folder.
the ebr1 etc should be automatically filled in with file pathway
4.click download button
5. plug in switched off telephone (if drivers installed properly should just run)
6. wait until green circle appears. hey presto! switch on telephone.
nothing i hav done all that, an the problem is when it is all finished, i get errors such as can't mount data, it doesn find anything, i don't know what to do else, if you want i can post pictures when i enter recovery mode
repair grand x pro
Hi, this is no working for me. Just have CWm after finished.
I tried update tool software too, but can't recognize phone, red x stay at chacking and installing drivers.
Someone help?
Hey
So I have a note4: SM-N910F from a french Carrier, I was on the ANJ4 firmware, my phone is unlocked. I decided to flash it to make it work on my US GearVR following the advice of some redditors who after my many concerns have assured me it was low risk. I downloaded the ANK4 from another carrier and tried to flash it with Odin.
It failed and gave me the following error
"Volume size is too big 81920 < 512000
ODIN : Invalid Ext4 image"
The guy who's help I was following told me to clear cache and even gave me an explanation on how to do it. So I figured I'd just revert to my original firmware, which I have by flashing it back
EXCEPT! and here is the problem. Now my phone says 'Firmware upgrade encountered an issue. Please select recovery in Kies & try again.' - and I can't connect it to the computer! connecting doesn't work. It does DETECT IT when I plug it in, but then goes 'starting connection' till it says it didn't work. I tried other USB ports, I tried to reboot, I tried to reinstall USB drivers through Kies. I'm starting to be at a loss.
so I can't do anything in my phone and I can't connect it to a computer.
halp
(also I would love to avoid the obvious don't trust the internet people rhetoric, I'm past that and I knew the risks )
There is a reddit thread here: red dit.com/r/GearVR/comments/2poelk/to_flash_or_not_to_flash_that_is_the_question_to/cmyl01d
I put a spacebar between the 2 D of reddit because I can't put links in as a new user
EDIT IN THE PROCESS OF FIXING IT SUCCESSFULLY - can't find delete thread button
Better tell us how you solved then.
Sent from my SM-N910F using XDA Free mobile app
odin failed
Sur.
I am interested by the solution because i have the same issue while flashing carrier firmwares (orange ...) in odin (volume size too big 122000<512000)
invalid ext4 image.
It is ok for flashing country firmwares (xef, dbt ...).
Thank's for answering.
I was also having the same problem.
Here is how you solve it.
1. Download the stock firmware ending with .tar.md5.
2. rename it so it ends with .tar
3. Extract it using winrar to get recovery.img file
4. Download this tool (http://forum.xda-developers.com/showthread.php?t=2446269)
5. extract it also, and move the recovery.img file from step 3 and put it in the newly extract folder from step 4.
6. Click the ImgToTar.MD5.bat file and sit back.
7. You will now see a new file in there named "recovery.tar.md5"
8. flash this file with odin and your done!
Done above and flashed just the file recovery .tar. md5
All I get now is the Samsung logo... left the phone hanging like this for 30 minutes thinking it would boot up to beginning of phone..
Am I missing something?
Any help would be appreciated
Regards Braggster
hi
how are you
I have a big problem
When you update a device error occurred ( fastboot failde)
Then the machine continues to this situation
Video demonstrates the problem
youtube.com/watch?v=E8k0KOQF8p0&feature=youtu.be
I do not know how to solve the problem
is there a solution?
you tried to flash a kitkat rom over an existing lollipop and the files flashed cannot be loaded by the lollipop bios (that one remained the same) you need to flash a lollipop stock rom instead
1. download and extract this file someplace on your pc
2. uninstall your existing Phone Flash Tool and from the drivers folder install both files (Intel Phone Flash Tool and Android Driver accepting defaults) reboot pc when finished
3. place your tab in DNX mode (from power off press and hold both volume keys then press pwr to start, in a few you screen will show "Fastboot starting..." message and hang on that. you must get that message on your tab screen, restart from power off until you have it)
4. start the installed Phone Flash Tool and load flash.xml from the extracted YT2-830L... folder then Start Flashing, it will reboot when done
ionioni said:
you tried to flash a kitkat rom over an existing lollipop and the files flashed cannot be loaded by the lollipop bios (that one remained the same) you need to flash a lollipop stock rom instead
1. download and extract someplace on your pc
2. uninstall your existing Phone Flash Tool and from the drivers folder install both files (Intel Phone Flash Tool and Android Driver accepting defaults) reboot pc when finished
3. place your tab in DNX mode (from power off press and hold both volume keys then press pwr to start, in a few you screen will show "Fastboot starting..." message and hang on that. you must get that message on your tab screen, restart from power off until you have it)
4. start the installed Phone Flash Tool and load flash.xml from the extracted YT2-830L... folder then Start Flashing, it will reboot when done
Click to expand...
Click to collapse
Really I do not know how to thank
But how Mark device receives calls
sayyid haroun said:
Really I do not know how to thank
But how Mark device receives calls
Click to expand...
Click to collapse
download extract and flash this using the same procedure (from DNX load and flash using flash.xml)
ionioni said:
download extract and using the same procedure (from DNX load and flash using flash.xml)
Click to expand...
Click to collapse
very good Everything is just fine.
Thank you very much
I want custom rom Lollipop for
The device phone lenovo s856
please
I have a question you can download Windows 8 on the tablet
I have same problem on Lenovo yoga 1050L... any help?
ionioni said:
you tried to flash a kitkat rom over an existing lollipop and the files flashed cannot be loaded by the lollipop bios (that one remained the same) you need to flash a lollipop stock rom instead
1. download and extract "this file" someplace on your pc
2. uninstall your existing Phone Flash Tool and from the drivers folder install both files (Intel Phone Flash Tool and Android Driver accepting defaults) reboot pc when finished
3. place your tab in DNX mode (from power off press and hold both volume keys then press pwr to start, in a few you screen will show "Fastboot starting..." message and hang on that. you must get that message on your tab screen, restart from power off until you have it)
4. start the installed Phone Flash Tool and load flash.xml from the extracted YT2-830L... folder then Start Flashing, it will reboot when done
Click to expand...
Click to collapse
Hi ionioni,
I have the same problem with Yoga tablet 830LC, would you please re-upload the file, i cannot get it because it is removed.
Thanks!
hi dear ionioni
the link you provided "flash this" is dead. can you please upload it again?
Thanks
Hi there.
I bought this phone only yesterday and the first thing I did (of course) was update it to Nougat (7.0) and root it. I installed TWRP.
Due to some bugs and functionality issues, I decided to factory reset my phone (through the settings app) however the phone will now no longer load past the "ASUS" boot logo.
I have tried all of the following to fix my issue, to no avail.
[X] denotes failed attempt. [O] denotes successful attempt.
Safe Mode [X]
Hard Reset [X]
--- Recovery Mode (phone will not boot into recovery) [X]
--- Built in settings [X]
Clear App Data Cache [X]
--- Recovery mode (phone will not boot into recovery) [X]
SP Flash tool
--- Scatter File (cannot get with bricked phone)
Copy original firmware file onto SD Card [X]
Install USB drivers for windows [O]
I believe the best solution is to fix it using a scatter file through SP Flash tool, however the MSM8953 scatter file does not seem to exist online for download. If anyone with an Asus Zenfone 3 could google search "Create a scatter file for android phones" and upload the scatter file they create - I would greatly appreciate it. Any other suggestions are kindly welcomed.
Thank you.
I don't know if it helps, but there's a post https://forum.xda-developers.com/zenfone-3/help/unbricking-zenfone-3-ze552kl-dm-verity-t3563970 ; correct me if I'm wrong but isn't SP Flash tool meant for mediatek device? As far as I'm concerned, ze552kl is powered by Snapdragon 625.
sanctitude888 said:
I don't know if it helps, but there's a post https://forum.xda-developers.com/zenfone-3/help/unbricking-zenfone-3-ze552kl-dm-verity-t3563970 ; correct me if I'm wrong but isn't SP Flash tool meant for mediatek device? As far as I'm concerned, ze552kl is powered by Snapdragon 625.
Click to expand...
Click to collapse
Thanks so much for this, hadn't stumbled across it. I'll give his unbricking steps a go tomorrow. Hopefully it works; its a method I haven't tried yet so there is hope!
[/CITAR]
Funcionou ?
I don't know how to leave well enough alone, and I've been working on the Onn 8" Pro (100003561) tablet trying to at least get root. I managed to unlock the bootloader, but was unable to use SP Flash Tool to dump my own boot.img, so I picked up one I found online that I'm pretty sure is from an older firmware version (https://forum.xda-developers.com/t/stock-stock-backups-images-otas.3998227/page-9#post-82619259) and now it keeps giving me errors, bluetooth crashing, etc, even after a factory restore from the recovery.
I CANNOT get SP Flash Tool to load the scatter file that deadman was using in his comment (https://forum.xda-developers.com/t/stock-stock-backups-images-otas.3998227/page-9#post-82619259) it just gives me an invalid scatter file error. I just want it back to factory, start all over, but no matter what I do I can't figure out how to flash deadman's firmware file, or ANY firmware backup for that matter. I keep getting scatter file errors, and SP Flash doesn't even wanna find my device. I've got the drivers installed properly, it shows up as "MediaTek PreLoader USB VCOM (Android) (COM3)" in my device manager. I've tried changing the COM port, running the flash tool in compatibility mode for Windows 7 (I'm on Windows 11 btw) running it as admin, and nothing. I can get an empty scatter file from WWR 2.51 to load in flash tool, but when I plug my device in it just does nothing. If I unplug my device, it gives an error that says "BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005)".
I can get into fastboot mode, but I can't open the settings in the normal boot because it instantly crashes to the ONN boot logo whenever I open anything. I'm at a complete loss here.
sethfoxen said:
I don't know how to leave well enough alone, and I've been working on the Onn 8" Pro (100003561) tablet trying to at least get root. I managed to unlock the bootloader, but was unable to use SP Flash Tool to dump my own boot.img, so I picked up one I found online that I'm pretty sure is from an older firmware version (https://forum.xda-developers.com/t/stock-stock-backups-images-otas.3998227/page-9#post-82619259) and now it keeps giving me errors, bluetooth crashing, etc, even after a factory restore from the recovery.
I CANNOT get SP Flash Tool to load the scatter file that deadman was using in his comment (https://forum.xda-developers.com/t/stock-stock-backups-images-otas.3998227/page-9#post-82619259) it just gives me an invalid scatter file error. I just want it back to factory, start all over, but no matter what I do I can't figure out how to flash deadman's firmware file, or ANY firmware backup for that matter. I keep getting scatter file errors, and SP Flash doesn't even wanna find my device. I've got the drivers installed properly, it shows up as "MediaTek PreLoader USB VCOM (Android) (COM3)" in my device manager. I've tried changing the COM port, running the flash tool in compatibility mode for Windows 7 (I'm on Windows 11 btw) running it as admin, and nothing. I can get an empty scatter file from WWR 2.51 to load in flash tool, but when I plug my device in it just does nothing. If I unplug my device, it gives an error that says "BROM ERROR: S_BROM_CMD_STARTCMD_FAIL (2005)".
I can get into fastboot mode, but I can't open the settings in the normal boot because it instantly crashes to the ONN boot logo whenever I open anything. I'm at a complete loss here.
Click to expand...
Click to collapse
Ugh, I feel so stupid. I FINALLY got SP Flash to recognise my device, by FOLLOWING THE DIRECTIONS :eyeroll:
So yes, you DO have to tear the back off of the tablet, and unhook the battery before you can do anything.