Introduction: This is a TECHNICAL guide on how you can use an UNLOCKED Samsung T-Mobile Vibrant T959 model on WIND in Canada and enjoy your UNBELIEVABLY priced WIND plan...well I know I am....
For WIND plans see go to their website and look under SHOP -> Voice Plans (sorry I am new on here can't post outside links yet
HEADS UP:
1. Sorry for the long sentences, take your time, grab some coffee and do this when you have plenty of chill time...
2. IMPORTANT: This article only covers connecting to WIND HOME....WIND AWAY does not work for me, I'm still playing with the settings, should I succeed, I shall let y'all know that way you can go roaming and pay those extra monies:lol:
<<UPDATE>> WIND Away NOW POSSIBLE... please see bottom section of this article
Conditions / Prerequisites
1. You don't have to be a techy (cell phone or otherwise PC / MAC guru) to do this but PLEASE do so at your own risk. I strongly recommend a pen and paper, that's right, pen and paper write down each step as you do it so you know what the heck you changed and can revert the settings.
2. Of course, the Samsung T-Mobile has to be UNLOCKED.
If you're buying from eBay (win that auction man!) make sure you ask the seller to confirm UNLOCK. This can be easily done by the seller asking T-Mobile customer service for unlock code using the phones IMEI but that is the seller's business, yours is to simply make sure its UNLOCKED before you cough so much $$!
Alternatively, should you already have your Vibrant phone, you can check for UNLOCK status before reading further down this cool idea. Open the dialer and key in *#7465625#. For an UNLOCKED Vibrant you should get the following result: Network Lock [OFF], Network Subset Lock [OFF], SP Lock [OFF] CP Lock [OFF], press OK to exit that menu and please proceed with caution.
3. Oh by the way, if you have WIND data plan then you do want to make sure your unlocked Samsung T-Mobile Vibrant T959 already has the APN settings...if not here's what you do:
i. Tap on Applications
ii. Tap on Settings
iii. Tap on Wireless and network
iv. Tap on Mobile networks
v. Tap on Access Point Names (APN)
vi. Tap on menu and then New APN and here is all that you need to populate in the fields:
Name: WIND DATA (or whatever you like)
APN: internet.windmobile.ca
MCC: 302
MNC: 490
APN Type: Internet
LEAVE OTHER FIELDS BLANK (FYI: they'll simply read NOT SET).
NOTE: If you'd like to use MMS...then perform step v. above and this time use the following to populate fields as per step vi above:
Name: WIND MMS
APN: mms.windmobile.ca
MCC: 302
MNC: 490
APN Type: mms
LEAVE OTHER FIELDS BLANK (or they'll say NOT SET).
4. And finally, I should mention that the following below steps / process / procedure is only for those whose unlocked Samsung T-Mobile Vibrants will not auto register to WIND Home and are always stuck in WIND Away zone which cannot even make any calls or even send text messages.
HOW TO FORCE SAMSUNG T-MOBILE VIBRANT T959 to register on WIND Home Zone
In other words remind it that WIND just like T-Mobile uses AWS (1700/2100MHz - Both) configuration.
FYI: Each time you'd like to go back to previous menu, press the MENU key and tap BACK to go back.
1. Open the dialer (that's the phone interface) on your Vibrant
2. Key in the following *#197328640# to access the phone's SERVICEMODE
3. Tap to select [1] Debug Screen
4. Tap to select [8] Phone Control
5. Tap to select [7] Network Control
6. Tap to select [4] Aquisition Order
7. Tap to select [3] UMTS->GSM []
7.a Phone should now say =AQUISITION ORDER= Select ACQ_ORDER_WCDMA_FIRST, now click Menu key and tap on Back, do this twice to go back to NETWORK CONTROL menu display
8. Tap to select [2] Band Selection
9. Tap to select [2] WCDMA Band[*]
Notes: Once in this menu, just double check to see that the following [4] WCDMA 1700 (FDDIV)[*] and [2] WCDMA 2100 (FDDI) [*] are selected. And how do you know its selected? Well, if it has the * (asterix) it means its already selected, if not then tap to select will select it for you. Once you have verified that [4] WCDMA 1700 (FDDIV)[*] and [2] WCDMA 2100 (FDDI) [*] are selected, now press the menu key and go back to the previous menu...
10. Tap to select [4] COMBI BANDS[]
Notes: Make sure the following have asterix on them; [7] WCDMA 1700 (FDD IV)[*] and [5] WCDMA 2100 (FDDI) [*]
11.That's it...you're done! Press the menu key and select END.
If you dont see WIND HOME in like 3-8 seconds, restart your unlocked Samsung T-Mobile Vibrant T959. If you still don't see WIND HOME and its just WIND AWAY, try making a call if that call does not go through then you did something wrong....go back and repeat all from step 1 above.
ENJOY WIND HOME on ANDROID, its cool!!
#################################################################
SETTING UP WIND AWAY ON UNLOCKED SAMSUNG VIBRANT on WIND MOBILE CANADA
Okay so I've been playing with the settings a bit more and I got Wind Away to work...here's how I did it and what you should know.
NOTE:
1. Once on WIND Away, there's no way to manually select the option that takes you back to WIND Home.
 What I mean to say is that once your Vibrant goes into WIND Away mode, it means if you wanna go back to WIND HOME, you have to follow the steps as detailed above under HOW TO FORCE SAMSUNG T-MOBILE VIBRANT T959 to register on WIND Home Zone
2. Wind Away only give you access to EDGE speeds for internet access
3. Need I remind you that WIND Away means that you're roaming?? Okay now that you know...do these steps only if you're stuck in some area with NO WIND Home.
Okay here's the STEPS...
1. Open the dialer (that's the phone interface) on your Vibrant
2. Key in the following *#197328640# to access the phone's SERVICEMODE
3. Tap to select [1] Debug Screen
4. Tap to select [8] Phone Control
5. Tap to select [7] Network Control
6. Tap to select [4] Aquisition Order
7. Tap to select [2] GSM->UMTS[]
 7.a Phone should now say =AQUISITION ORDER= Select ACQ_ORDER_GSM_FIRST now tap Menu key and tap on Back
8. Tap to select [3] GSM Band []
9. Tap to select [2] GSM 850 []
 9.a Phone should now say Select GSM 850 Only[*], now tap Menu key and tap on Back, do this twice to go back to =BAND SELECTION= Menu display
10. Tap to select [4] COMBI BANDS[], FYI while in this display [1] GSM 850 [*] should have * on it, if yes then continue, if not go back and repeat step 8
11. Tap to select [4] PCS 1900 []
 11.a Phone should now say Add PCS 1900[*] if you want bla bla bla....too long...now tap Menu key and tap Back
12. Tap to select [7] WCDMA 1700 (FDD IV)[]
 12.a Phone should now say Add WCDMA_W1700 [*] if you want bla bla bla too long...now tap Menu key and tap Back
13. Tap to select [5] WCDMA 2100 (FDD I)[]
 13.a Phone should now say Add WCDMA_W2100 [*] if you want bla bla bla too long...now tap Menu key and tap Back
That's it...your Vibrant should now refresh its antenna and you should see Wind Away in the notification area, also if you have data active, E for EDGE should show up 2-3 minutes later.
Try to make a call if it does not go through, reboot the phone and when you're back, check your settings by going through all the steps outlined above.
ENJOY ROAMING ON WIND AWAY, don't pay too much unless you have to!:hehehe:
Hi,
Any one got wind away zone also working ?
Wind Away is possible...but its quite a bit of WORK
@mohitmoudgil: Check out my updated version of the original posting, its got some Wind Away workarounds...
Thanks. Everything is working fine but when it looses signal like in basement then phone takes about 2-3 minutes to get the signal back.
Is there anything we can do make it fast. May be it is looking for too many bands or smoething.
I have a samsung vibrant from Tmobile currently on mobilicity. I tried wind, and mobi, both worked. However, I decided to go with mobi because of the better price on the monthly plan.
I agree with the last post. Every time I go to an area where it loses a connection, it seems to be searching for a while. Sometimes it does reconnect but it takes a while. Other times I have to continually go into the "network and wireless" settings and search manually for the provider and reconnect.
The staff at mobilicity are telling me to find out how to lock the phone to 3g mode only. I can turn 2g off, but there is no way of locking it to 3g only-- not that i'm aware of anyway. I have selected my APN, and turned data roaming off..... i'm not entirely sure what they mean by this.
I work and stay right in the middle of the coverage zone all day, but some days I can only get "CDN roaming" as a provider. Unfortunately, I didn't know all of this and got charged for data sent and received on the network even while being in the coverage zone. Also the reps didn't help me out there because I don't have a mobilicity phone. Currently the only way to really resolve these types of connection issues with the network is calling them for a refresh.... which doesn't help if you find out after being sent tons of texts, etc.
I read there may be a hack to lock it to wind home zone or mobilicity home zone? is that true? can anyone help?
thanks
how did u guys make it work?? when i search ...i get Wind Home and Away....
but i cant connect....says something about sim is not allowing or sumtin....
HELP??? please
solidkundi said:
how did u guys make it work?? when i search ...i get Wind Home and Away....
but i cant connect....says something about sim is not allowing or sumtin....
HELP??? please
Click to expand...
Click to collapse
What is the exact error you are getting ?
Is it possible to have these commands automated via custom methods?
Will these tweaks work on a Samsung Galaxy S from Bell as well? I'm thinking of buying the phone off bell, unlocking+rooting, then switching to WIND...
My phone seems to be stuck at (Searching). It worked at home using the tips in this thread, but went back to (Searching) when I left the house.
stringbeans said:
Will these tweaks work on a Samsung Galaxy S from Bell as well? I'm thinking of buying the phone off bell, unlocking+rooting, then switching to WIND...
Click to expand...
Click to collapse
No, only the T-Mobile version will work, from what I understand. It has to do with the radios.
mohitmoudgil said:
What is the exact error you are getting ?
Click to expand...
Click to collapse
when i choose Wind Home... it says...
"SIM CARD DOES NOT ALLOW CONNECTION TO THIS NETWORK"
then it asks me to search again... its the same thing over n and over again.....
mine is T-Mobile Vibrant...Unlocked using the guide found in xda.... i have my brother's Wind Mobile Sim in my T-Mobile while i'm trying this...
can someone help?
Thanx in advance!!!!!!
solidkundi said:
when i choose Wind Home... it says...
"SIM CARD DOES NOT ALLOW CONNECTION TO THIS NETWORK"
then it asks me to search again... its the same thing over n and over again.....
mine is T-Mobile Vibrant...Unlocked using the guide found in xda.... i have my brother's Wind Mobile Sim in my T-Mobile while i'm trying this...
can someone help?
Thanx in advance!!!!!!
Click to expand...
Click to collapse
I had this same problem but my phone would usually connect to Wind Home when I tried a second time. The solution I found was to follow the instructions at the beginning of this thread to connect to Wind Home but make sure that the only two bands selected under COMBI BANDS are [7] WCDMA 1700 (FDD IV)[*] and [5] WCDMA 2100 (FDDI)[*]. When I first set mine up, I also had the WCDMA 1900 option starred. Once I turned this off I never had a problem connecting to Wind Home.
after following the instruction on here, i haven't been able to get wind data to work; i try loading a web page and it just hangs...
any help will do..
btw, i'm in toronto
PhysWiz314 said:
I had this same problem but my phone would usually connect to Wind Home when I tried a second time. The solution I found was to follow the instructions at the beginning of this thread to connect to Wind Home but make sure that the only two bands selected under COMBI BANDS are [7] WCDMA 1700 (FDD IV)[*] and [5] WCDMA 2100 (FDDI)[*]. When I first set mine up, I also had the WCDMA 1900 option starred. Once I turned this off I never had a problem connecting to Wind Home.
Click to expand...
Click to collapse
How did you remove the WCDMA 1900 option? Whenever I click, I only have the option to add it.
To remove the WCDMA 1900 option, first go into [2] WCDMA BAND and select [2] WCDMA 2100(FDD I). This should de-select everything but this one.
Then you can go back to the COMBI BANDS menu and add the other band [7] WCDMA 1700 (FDD IV).
Improved with Froyo?
Any news on whether the switch between Home and Away has improved with 2.2 Froyo?
Do I understand correctly that the phone will automatically switch from Home to Away but not back? Once you switch back manually to Home, will it automatically switch to Away the next time you leave your home zone?
Thank you in advance
I just flashed to the Froyo ROM found here
http://forum.xda-developers.com/showthread.php?t=740558
last night and it seems to have fixed the Wind Home problem.
My settings are now
= ACQUISITION ORDER = ... [3] UMTS->GMS[*]
= BAND SELECTION = ... [1] AUTOMATIC[*]
This seems to be the default setting after I flashed the ROM as I didn't change anything. My phone now connects to Wind Home when I start it up. I have not tried leaving the city (Edmonton) to see if it automatically connects to Wind Away though.
Vibrant in Vancouver?
I'm wondering if anybody gotten this to work in Vancouver...
After I gone through the process and selected WCDMA 1700 (FDD IV)[*] and [5] WCDMA 2100 (FDDI)[*], my phone cannot seem to find Wind Home at all.
I tried at various locations around town and only picked it up around Main & SW Marine Dr. The signal quickly dropped to 0 when I drove away.
The phone has no problem picking up Wind Away once I reset it to auto select.
Is this just a network thing or there's more settings to change for the phone? Surely the network can't be that bad.
Thanks in advance!
nightning said:
I'm wondering if anybody gotten this to work in Vancouver...
Click to expand...
Click to collapse
Yep, I've set this up and it works fine. Generally Wind's network seems to show only 1-2 bars and I've noticed the radio always runs over 100dbHz. But its rare to have no coverage at all. Steps were unlock, 1700 & 2100 like you mentioned, acquisition order UTMS > GSM, internet APN set for internet.windmobile.ca. This was all done on a 2.2 vibrant and i have used this combo on jk2, jk6, jl1, jl4 modems without problems- jl4 seemed to work best.
west-siiiyyde said:
Yep, I've set this up and it works fine. Generally Wind's network seems to show only 1-2 bars and I've noticed the radio always runs over 100dbHz. But its rare to have no coverage at all. Steps were unlock, 1700 & 2100 like you mentioned, acquisition order UTMS > GSM, internet APN set for internet.windmobile.ca. This was all done on a 2.2 vibrant and i have used this combo on jk2, jk6, jl1, jl4 modems without problems- jl4 seemed to work best.
Click to expand...
Click to collapse
I guess it's a modem problem then. The phone tends to drop to 0 signal but can call & receive fine. Not sure if this is the cause of the battery drain. 10% over 7 hours even just on idle with only 3G running.
I'm a noob, running 2.1 stock. Never flashed anything before. What's the safest route to getting this fix? Root it, install ROM manager, backup then flash a 2.2 ROM or just flash the jl4 modem?
Hi, we just switched from US Cellular to Verizon, and apparently Verizon does not allow users to select just CDMA like USCC. The Verizon network is also very weak here in Maine it appears (much to my chagrin). We have so many dropped calls and dead spots is laughable - if you were not pissed anyway. I'm wondering if the difference between carriers that supposedly share towers, is that on USCC I stayed on CDMA for the improved data speeds and stability, and because it yielded better battery life due to the 15dBm stronger signal.
I'd like to switch us to CDMA and test it, but the android hidden dialer code does not work on the Note 4, but does on my MXP. Is there a way to switch to CDMA?
Thanks in advance,
Moose
Try this one, but not sure if it will work on your phone....
UE Setting Protocol Menu
[2] NAS
*#0011#
then on the top right (three dots) press it, then select BACK, then press three dots again, and select Key Input, on the next screen, you type Q0000 (capital Q and four ZERO's)
Wait a few seconds, then select the following from the succeeding screen:
[2] UE Setting & Info
[1] Network control
[4] Band Selection
Then select WCDMA Band, then exit and reboot
This thread is for those who feel brave enough to venture into this settings menu. No, that isnt a challenge, its a warning. Even if you follow these instructions down to the letter, I am not responsible for anything you do to your phone. THIS MENU CONTAINS STUFF THAT CAN HARD BRICK YOUR PHONE!!!!
That being said, heres the reason for this thread. Some of us have ventured into the sim unlocking of our devices for a myriad of reasons. Some of us are planning on using the device on a network that uses LTE bands that Sprint doesnt. That being the case, there are some LTE bands that are disabled by sprint but the phone is still physically capable of connecting to. In order to enable all LTE bands that the phone is physically capable of, you can do the following.
from the dialer, dial
*#0011#
hit the upper right menu button, select key input, and type a capital Q, then ok. then menu again, key input type in 4 zeros "0000" and hit ok. Menu again and hit the back selection, menu again and hit the back selection. It can take up to 30 seconds for it to give you the next menu and you may need to repeat that process, but once the menu is up, make the following selections.
UE SETTING & INFO
SETTING
PROTOCOL
NAS
NETWORK CONTROL
BAND SELECTION
LTE BAND PREFERENCE
LTE ALL
if the LTE band youre trying to use isnt in the list above "LTE ALL", then the phone isnt physically capable of that LTE band, and if you absolutely NEED that missing band, youre going to be best served by getting a different phone made for a carrier that uses said band as its not possible to add LTE bands that the phones physical radios arent capable of connecting to.
First want to put it out there that you do this at your own risk
I love that T-mobile has Band 12 LTE coverage but for me the data speeds on Band 12 are horrifically slow, so I prefer my phone to be on Band 4 LTE (at least while at work).
I used to do this change all the time on my S6/Edge and the steps are vary similar to do them on the S7(slightly more involved).
To start with, if you mess with bands, it can(and probably will) affect some sort of your service
So to change network bands you have to enter the service menu. To do this, go to the phone dialer and enter
*#2263#
Once here you will see a screen saying ServiceMode followed by various options
To turn off Band 12 choose LTE Band Preference (#4 on the list).
Then hit next page until you see Band 12 and deselect it (this will remove the * from next to it).
Once that is done, in the top right you'll see where it says "More" select this and choose "Back" - do this until you get back to the main page
Now back at the "Main Menu" choose "Apply Band Configuration" (option 7) and you're done.
Once you exit the menu(by hitting either home or the back phone key) you'll lose signal for a second while the phone switches the bands around.
To revert back to normal, enter service menue *#2263#, choose "Select All Bands"(Option6) and then Choose "Apply Band Configuration" and you're back to normal
Hope this helps someone
EDITed the info above so that you can turn off just Band 12 and keep calling features
Updated the instructions, figured out how to make the phone stick to Band 4 and still retain ability to make/receive calls
Oh Ya band 12 is terribly slow. At least when compared to band 4. Band 4 is wideband at 20x20 20mhz bandwidth while band 12 is 5mhz bandwidth. It's just barely enough.
I was wondering why my speeds suck since I've upgraded to a new phone guessing this is why
Do you have any approximations of the speed difference between the bands, like with speedtest or something?
I didn't notice any difference in speed with my tests was really hoping for better. I'm only getting about 15-20mbps now I was getting between 60-80 about 3 months ago
Ishmael89 said:
Do you have any approximations of the speed difference between the bands, like with speedtest or something?
Click to expand...
Click to collapse
I'll get some later tonight - something is going on with LTE around my work and Band 4 and Band 12 are both acting up
I cant access *#2263# menu on my galaxy s7 edge exynos version
Is there a way to determine the current band (LTE/UMTS) that I am using with a stock phone without root? I tried the service menu (*#lgmenu#*910#) but I don't see any options available to select LTE band.
I don't know about the H910, but on some variants, in the hidden menu, you go to Field Test -> Modem Settings, and you can see an LTE Band Selection menu there. However, if there is no reset option, then I don't think it's safe to mess around with the bands there since you could be stuck on a single LTE band.
For checking what current band you're on, you can use one of those network signal analysis apps like LTE Discovery, Network Cell Info, or SignalCheck. Their main functions should work without root access.