Blu vivo 5r - Blu Vivo 5R Questions & Answers

Phone won't read double sim function, tried factory reset.

Hi,
If you want you can try to flash newer update V25. It's here https://forum.xda-developers.com/viv...eev11-t3492756
Backup your important data. Use SP flash tool to flash the newer update. Let it ran through the setup, and then factory reset.
Please let us know if you managed to fix the problem. Thanks.

Related

Soft Bricked!! I think?

hey guys pretty sure I soft bricked my s4(NC5). I was trying to revert my Hyperdrive root back to factory cause the wifi wasn't working. But I think when I thried to unroot it erased everything. I can get phone into download mode still. And when I turn on the phone I get: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. Tried Kies but program doesn't recognize my phone. Installed/re-installed drivers, but didn't fix. I'm pretty new to customizing my phone this way, but all I want is my phone back to factory. If anyone can fix this with Odin or something I would appreciate a walkthrough or link to another forum if there is 1.
Just flash the latest stock rom and you will be fine.

update to lolipoop

Hi i have attached a photo of my version of base band, my question is how to put android 5, i dont know, i search something about odin and a rom, but i am afraid to brick my cellphone, please help me
and when the phone in OTA, say that it is and update, i did it but the update when is loading, it says it was interrumped (firmware is), i reset the phone with wipe data and cache and nothing the error persists
please i like android 5.
thanks and greetings!
Follow [How-To] Update to I337_OC3 - 5.0.1 and KeepRoot. This is the best way, since you probably will not be able to perform an over the air update, I'm guessing.
how can i backup my stock rom without rooting?

[PROBLEM] Rooted > Flashed to U Firmware > Soft Brick > Flashed back to Verizon FW

[PROBLEM] Rooted > Flashed to U Firmware > Soft Brick > Flashed back to Verizon FW
Hi, relatively new to this, so sorry in advance if I made some obvious mistakes, but my phone is now soft bricked and I can't find a solution.
1) I was on Nougat
2) Rooted with Odin to remove Verizon bloat
3) Didn't really change much, still had MMS issues etc
4) Did a the deep verizon debloat. Started getting an endless message 'IMS Service has stopped'
5) Decided to flash U Firmware to get a non-Verizon, unrooted starting point. Used HOME_CSC to keep data
6) Soft bricked phone (didn't finish install and was stuck on a boot menu with the message 'dm-verity verification failed' )
7) Flashed back to a previous version of Verizon firmware, again, HOME_CSC - (G935VVRS4APH1_CL8875708_QB10880117_REV02_user_low_ship_MULTI_CERT.zip). (Did this twice now, once with PrinceCosmy Odin)
8) Install went well, Verizon logo on boot.
9) Soft brick #2 - I'm being asked for a password to decrypt storage...I set no password for this. So I'm stuck.
Thanks in advance, any support is much appreciated!
The PH1 firmware is very old. You might have better luck flashing to QF2. Honestly, your best bet is to boot into recovery to do a factory reset, then start over completely. That will clear the decryption issue. Then look at the QF2 ROM in this forum.
CVertigo1 said:
The PH1 firmware is very old. You might have better luck flashing to QF2. Honestly, your best bet is to boot into recovery to do a factory reset, then start over completely. That will clear the decryption issue. Then look at the QF2 ROM in this forum.
Click to expand...
Click to collapse
Thanks! I was hoping to not have to reset, but have recently backed it won't be a big deal.
I have two other questions though
a) how do I know which firmware is QF2? (the device was originally on MM but through smart switch I upgraded to Nougat)
b) what's the process for the factory reset? I'm trying via the recovery menu and it isn't working (the MM 6.0.1/ G935UUES4AQC1 install)
Thanks
(UPDATE - OK so I went back to the U firmware, and from that boot menu selected 'Wipe Partition/Cache'. Also did a factory reset which looked like it failed. Still couldn't boot phone though. However I went back to the verizon firmware and there was no passcode prompt now. Phone is factory reset to 6.0.1.
Should I go to QF2 now?
How can I get to a non-verizon firmware?)
OK, I've solved everything I mentioned above by doing as suggested,
I think I had a partition of something somewhere that was no good.
1 - Factory Reset from boot menu (after wiping partition/cache)
2 - Flashed PH1
3 - Verizon bloatware reinstalled and was loading phone properly
4 - Did a factory reset from here via settings
5 - After factory reset, Flashed QC1 w/out HOME_CSC
6 - Now booting properly with a clean(ish), non-Verizon firmware.
I'm still interested in removing as much bloat as possible from Samsung, and am constantly being harassed notified that my Nougat update is downloaded and ready to install!
Hope that helps someone!

Please Help

My Moto X play's 1st sim has a working internet and i can message with my first SIM but i can't call with it.it is happening since the nougat update...
Please help.....???
Please make sure that it won't have any hardware or Sim issue.
If all the things are perfect then issue with software only.
Try to hard reset your phone from recovery. -> If issue not resolve then follow as below:
Follow the steps below:
1. Unlock the boot loader.
2. Flash TWRP recovery.
3. Flash Stock ROM again.
It will resolve the issue.

SIM Card not usable after flash

Hello Community! I hope I am right here, otherwise please just move this thread to where it belongs to, thanks!
I have a serious problem with my sgs 8 (950F). I flashed newest twrp, magisk, renovate-ice-g95x-r164 and no-verity-opt-encrypt-5.1. Everything worked fine and like a charme. I decided to update to a nightly version (worst decision ever) and before i was able to flash, twrp said: zip file corrupted. So I decided to go back to version 164 via the full backup i´ve made in twrp before. After the restore-process was finished, the device didn´t recognize the sim card anymore. So I tried to go back to stock firmware, which did not work since (after odin says pass) the firmware always stops at 32% and erases everything but the download mode on my phone. So I flashed twrp again, made a full wipe und data format and installed the renovate ice 164 again. After the boot, the sim card is detected and I also have to unlock it with the pin code. The problem is, that i can´t enter the network (Austria/Telering) and also I can´t search for any networks with my sim card, only emergency call is available. I am desperately looking for a solution to solve that problem and since I am no expert when it comes to details in flashing and the connections between hardware and software, i really could need help from experts. My guess is, that something is wrong with the modem. Can this be solved by flashing the mode new via odin? Stock firmware is not able to be flashed on my device, because of the error I mentioned above.
Thanks for you help and time!

Categories

Resources