ZMAX PRO (METRO PCS) Won't Turn On - ZTE Zmax Pro Questions & Answers

After charging overnight (so I think) I can't get my ZMAX PRO (METRO PCS) to turn on.
Held the power button down along with volume down button - nothing.
Any1 with this problem?

Hold the power button in continuously and plug in wall charger (while still holding power button in)
After few seconds it will boot up to ZTE screen and continue
Sounds like bad cable or plug and phone actually at 0% not 100%

It Worked!!
---------- Post added at 05:52 PM ---------- Previous post was at 05:45 PM ----------
"Hold the power button in continuously and plug in wall charger (while still holding power button in)
After few seconds it will boot up to ZTE screen and continue."
IT WORKED!! I haven't been able to get my ZTE ZMAX PRO to show charging (pulsating home button) or turn on in almost 2 days! Went and got a new charger with no luck. Did the little trick this morning and BOOM it worked. The phone was even at 80%!! So it was charging the whole time.
Thank you SOOOOOOO much!! You're a lifesaver.

chachi said:
Hold the power button in continuously and plug in wall charger (while still holding power button in)
After few seconds it will boot up to ZTE screen and continue
Sounds like bad cable or plug and phone actually at 0% not 100%
Click to expand...
Click to collapse
Not sure why I never saw this feedback to my OP but thank you!
Now have to track down why it wouldn't turn on.

Thank you
chachi said:
Hold the power button in continuously and plug in wall charger (while still holding power button in)
After few seconds it will boot up to ZTE screen and continue
Sounds like bad cable or plug and phone actually at 0% not 100%
Click to expand...
Click to collapse
Thank you so much, I tried your suggestion and it worked. Something so simple. You are a true life saver.

I'd never even heard of this site, before.
chachi said:
Hold the power button in continuously and plug in wall charger (while still holding power button in)
After few seconds it will boot up to ZTE screen and continue
Sounds like bad cable or plug and phone actually at 0% not 100%
Click to expand...
Click to collapse
Aaaaaaand, now I have an account. I feel like you have saved my life, honestly.

Wow !!! Thank you sooooo much , this worked !!! Your awesome !!

I tried everything, it shows when its charging but will not turn on, Ive tried everything..

Related

[Q] HELP! My DX won't turn on

My DX is not turning on. The battery died and so the phone cut off and when I plug the charger in nothing happens and it won't turn on when the charger is plugged in. I have tried everything I can think of - pulled the battery and put it back in, held the power button down, held the power button and home row keys down, held the power button and camera keys, and I'm out of ideas. Can anyone help?
Take out the battery and hook it up to the wall charger. You should see a battery with a question mark. Then insert the battery and see if it recognizes the battery.
I just took the battery out and left it out for like 15 min and then put in back in and it worked. Thanks for your reply however, I really appreciate it!
phones won't start with a dead battery.. don't forget to charge -_-
Sent from my DROIDX using XDA App
just something for anyone else who has this issue in the future when my DX dies its a ***** to re-start i usually have to hold the power key down for 10-20 secs then it will start or show the battery logo

Phone not turning on and led flashing rapidly

I just flashed MOAR rom on my phone a few days ago and everything was working perfectly then while at work I pulled my phone out of my pocket and noticed my case had slipped off and was holding the power button down. After fixing the case I tried to unlock my phone and nothing came up on my screen. I held down the power button and the only thing that happened was my LED indicator is flashing green rapidly and at different brightness. Then I pulled the battery and left it out of my phone for 2 hours and still the only thing that is happening is the LED. When I plug it into my computer without me hitting the button the LED is flashing. It wont boot into recovery and I don't want to send it in and them find a custom rom on it so any help would be greatly appreciated.
7
Mjordan88 said:
I just flashed MOAR rom on my phone a few days ago and everything was working perfectly then while at work I pulled my phone out of my pocket and noticed my case had slipped off and was holding the power button down. After fixing the case I tried to unlock my phone and nothing came up on my screen. I held down the power button and the only thing that happened was my LED indicator is flashing green rapidly and at different brightness. Then I pulled the battery and left it out of my phone for 2 hours and still the only thing that is happening is the LED. When I plug it into my computer without me hitting the button the LED is flashing. It wont boot into recovery and I don't want to send it in and them find a custom rom on it so any help would be greatly appreciated.
Click to expand...
Click to collapse
I am assuming it won't go into download mode either? Try holding the power button in for at least 30-40 seconds.
Tulsadiver said:
7
I am assuming it won't go into download mode either? Try holding the power button in for at least 30-40 seconds.
Click to expand...
Click to collapse
No, I've tried holding just the power button for a minute or trying to go into either download or recovery mode and got nothing.
Mjordan88 said:
No, I've tried holding just the power button for a minute or trying to go into either download or recovery mode and got nothing.
Click to expand...
Click to collapse
Try the same thing with the charger plugged in.
"Try holding down the power button for 1 minute with the charger connected. If this doesn't present the screen, try holding the power button AND both volume buttons at the same time. This should bring up a menu. There should be an option for reboot or force reboot"
Tulsadiver said:
Try the same thing with the charger plugged in.
"Try holding down the power button for 1 minute with the charger connected. If this doesn't present the screen, try holding the power button AND both volume buttons at the same time. This should bring up a menu. There should be an option for reboot or force reboot"
Click to expand...
Click to collapse
Thanks for trying to help, I've tried holding both volume and power button for a minute and nothing. After having it plugged in for a few minutes my battery started to get warm.
Mjordan88 said:
Thanks for trying to help, I've tried holding both volume and power button for a minute and nothing. After having it plugged in for a few minutes my battery started to get warm.
Click to expand...
Click to collapse
Just something I found while looking for answers. At least your battery is getting warm. That is better than the alternative.
Tulsadiver said:
Just something I found while looking for answers. At least your battery is getting warm. That is better than the alternative.
Click to expand...
Click to collapse
For just a second my computer said the USB device malfunctioned but now it's gone again.
Mjordan88 said:
For just a second my computer said the USB device malfunctioned but now it's gone again.
Click to expand...
Click to collapse
Are you using the original data cable? Try a different USB port maybe?

How to turn on wileyfox storm after battery fully drained.

Hello to all experts.
1- Accidently my wileyfox storm battery was fully drained at night and i was not at home during that time.
I connected mobile to wall outlet it was showing red colour on home button when connected (as a battery charging indication) but after near about 8 hours i tried to turn it on but no luck. I pressed power button for many seconds, many times but no luck.
Now what should I do to turn on my wileyfox storm.
2- My second question is how to open back cover of my wileyfox storm. i did not find any notch or point to open back cover to see inside.
Thanks in advance.
Plug your phone on charge but not in usb, and wait about 20mn
I am having this problem as well right now, how did you fix it?
I too have the same problem , it was off because drain , but then put in office is no longer lights . the light is always red . what can I do?
Leave it charging for a while from the mains. Red light means charging on low charge, the screen doesn't turn on until it has some charge.
it is normal to be in power for eight hours, and nothing has changed ? Red light always on and off screen
rugabella said:
it is normal to be in power for eight hours, and nothing has changed ? Red light always on and off screen
Click to expand...
Click to collapse
Have you tried holding down the power button now?
Johndawolf said:
Have you tried holding down the power button now?
Click to expand...
Click to collapse
yes , and unfortunately nothing happens . problems that can have ? He does not get the charge? because it comes on the same spy and it is always red ? the phone has just three months
for anyone who is interested I solved !!! simultaneously press power button and volume less for about 20 seconds and the phone switches
rugabella said:
for anyone who is interested I solved !!! simultaneously press power button and volume less for about 20 seconds and the phone switches
Click to expand...
Click to collapse
Im dealing with the same problem from morning. Im going to try your solution by 10 minutes.
ijaz1976 said:
Hello to all experts.
1- Accidently my wileyfox storm battery was fully drained at night and i was not at home during that time.
I connected mobile to wall outlet it was showing red colour on home button when connected (as a battery charging indication) but after near about 8 hours i tried to turn it on but no luck. I pressed power button for many seconds, many times but no luck.
Now what should I do to turn on my wileyfox storm.
2- My second question is how to open back cover of my wileyfox storm. i did not find any notch or point to open back cover to see inside.
Thanks in advance.
Click to expand...
Click to collapse
I am no expert, but I've had the same problem after fully running the phone battery down. While looking for an answer I managed resolve the issue by to hold the power down and down array while the phone in chagrining for around 2 minutes and the phone started up, almost by complete accident.
rugabella said:
for anyone who is interested I solved !!! simultaneously press power button and volume less for about 20 seconds and the phone switches
Click to expand...
Click to collapse
Hi rugabella
please guide me
I have same problem
since 17:30 today my storm battery drained and when i put it in charge LED light RED
it not Happened before , until now (20:44) phone is in charge and LED light is red
I tried time to time the key combination you mentioned (Power + volume Down) but nothing happens
now I'm waiting for more time to spent charging
Can you or someone else help me more?
tiosus said:
Hi rugabella
please guide me
I have same problem
since 17:30 today my storm battery drained and when i put it in charge LED light RED
it not Happened before , until now (20:44) phone is in charge and LED light is red
I tried time to time the key combination you mentioned (Power + volume Down) but nothing happens
now I'm waiting for more time to spent charging
Can you or someone else help me more?
Click to expand...
Click to collapse
16hours and still RED light and nothing else
any help!!!!!!!!!!!!!?
tiosus said:
16hours and still RED light and nothing else
any help!!!!!!!!!!!!!?
Click to expand...
Click to collapse
I had the same issue you are having, battery ran down to empty, charge light would always be red no matter how long it was plugged in, slow charge, fast charge, holding down the power button, even with the inclusion of the vol down, nothing worked.
I fixed it by opening up the phone and disconnecting then reconnecting the the battery. After doing so the phone started to properly charge (phone booted up and displayed the battery animation). Everything now operates as normal, though I won't be letting it drain to 0% again, that's for sure.
If you're able to, give it a shot and hopefully it will do the trick for you as well (though I'm probably way to late).
Hello to all
I again have the same problem, the battery of my storm has fully discharged, but although is it charging for many hours the LED light is always red and the phone will not turn on. This time even while holding together power button and volume less nothing is happening.
Can anyone help me and tell me how I can fix ?
Level1imp how did you open the phone to disconnect the battery ?
level1imp said:
I had the same issue you are having, battery ran down to empty, charge light would always be red no matter how long it was plugged in, slow charge, fast charge, holding down the power button, even with the inclusion of the vol down, nothing worked.
I fixed it by opening up the phone and disconnecting then reconnecting the the battery. After doing so the phone started to properly charge (phone booted up and displayed the battery animation). Everything now operates as normal, though I won't be letting it drain to 0% again, that's for sure.
If you're able to, give it a shot and hopefully it will do the trick for you as well (though I'm probably way to late).
Click to expand...
Click to collapse
How i did you open up the phone? I'm struggeling with it
Thank you soooo much!!!!
rugabella said:
for anyone who is interested I solved !!! simultaneously press power button and volume less for about 20 seconds and the phone switches
Click to expand...
Click to collapse
After I read your message here, I've tried and finally I solved this problem in my phone.
I was getting crazy because there isn't place to fix this phone in my country and the company Wileyfox wanted me to send my phone to someone in europe to them send to Wilefox to fix it. I've spoke with the company today to see what could they do for me and the solution they gave to me was this and to I try to open the back by myself. But this last solution it isn't a solution because would make me loose the garantee. Why the technician didn't told me about this solution? I'm so disappointed with them.
hi i have a wileyfox storm it is not going on when i press power button .now i connect with wall charger so it show a red circle on the bottom and phone show logo on and of .how can i put it on
This works!!
For anyone who needs it, this also works on wileyfox swift 2
Had this too, but solved
Just had this problem occur on my Wileyfox Swift 2 Plus. Completely drained, left on charge for 4h but it got 0% charged in that time.
For me, hooking it up to a slightly stronger power source (5V 2.1A) USB port of my power bank,
in combination with Power + Volume UP
Got me to a boot screen I'd never seen before.
Hit Fast Boot, it looked like it just turned off again but a few seconds later I saw the normal boot screen pop up

Phone won't turn on, no charging indicator

Hey All,
I have bought a used leeco pro 3 off swappa. Unfortunately I didn't get the phone until much later after delivery (had to have someone bring it to me). In photos the phone works fine, but when I got it it won't turn on and there's no indicator that it's charging at all. When I do plug it in, the phone does get warm though.
Any thoughts what the problem could be?
Have you tried another USB-C cable? Apparently the stock OEM one sucks.
sk8223 said:
Have you tried another USB-C cable? Apparently the stock OEM one sucks.
Click to expand...
Click to collapse
I have another leeco and I tried that charger still nothing. I've been reading and wondering if the battery drained. I'm going to leave it plugged in for awhile to see if anything changes. I plugged it directly into my laptop and it made that noise that it recognized something was plugged in but it didn't turn on or anything like that.
phillytemptation said:
I have another leeco and I tried that charger still nothing. I've been reading and wondering if the battery drained. I'm going to leave it plugged in for awhile to see if anything changes. I plugged it directly into my laptop and it made that noise that it recognized something was plugged in but it didn't turn on or anything like that.
Click to expand...
Click to collapse
You should to try this, hold the power button more than 1 min, or hold Volume down+power until display show up then hold the power again util it reboot.
hearnfar said:
You should to try this, hold the power button more than 1 min, or hold Volume down+power until display show up then hold the power again util it reboot.
Click to expand...
Click to collapse
Tried both, still nothing.
phillytemptation said:
Tried both, still nothing.
Click to expand...
Click to collapse
Press power button 2 minutes or longer, sometime the phone will come alive I did it couple of times before.
If not work try this tread:
https://forum.xda-developers.com/le-max-2/how-to/guide-hard-brick-fix-qualcomm-hs-usb-t3492949
Plug in charger know hold down power and volume push it down a hold for 15 seconds you may need to repeat this.
Sent from my LEX720 using xda premium
Moon75 said:
Press power button 2 minutes or longer, sometime the phone will come alive I did it couple of times before.
If not work try this tread:
https://forum.xda-developers.com/le-max-2/how-to/guide-hard-brick-fix-qualcomm-hs-usb-t3492949
Click to expand...
Click to collapse
Hmm any ideas on what files I would need for the leeco pro 3? It indeed shows up as Qualcoom HS loader on my computer.
mchlbenner said:
Plug in charger know hold down power and volume push it down a hold for 15 seconds you may need to repeat this.
Sent from my LEX720 using xda premium
Click to expand...
Click to collapse
I'll keep trying but doesn't want to turn on. Interestingly though, when it's plugged into my laptop at least I can hear the phone being disconnected via USB when I hold the power button down. It just doesn't seem to boot up.
When you plug it does it show it charging.
You must push power and volume button at the same time.
Never buy from them.
Sent from my LEX727 using xda premium
phillytemptation said:
Hmm any ideas on what files I would need for the leeco pro 3? It indeed shows up as Qualcoom HS loader on my computer.
I'll keep trying but doesn't want to turn on. Interestingly though, when it's plugged into my laptop at least I can hear the phone being disconnected via USB when I hold the power button down. It just doesn't seem to boot up.
Click to expand...
Click to collapse
Try use different cable connect phone to computer. For the phone show as Qualcoom HS loader on pc, I just can remember did not format it or anything like that and the phone was fine working again.
I'm having a similar problem, I bought a new leeco pro 3 charger today, original, plugged it in charged until led was green. An hour later noticed fingerprint scanner not working, so i discovered the phone is off, now I can't turn on. I had AICP ROM, the latest one from 21 january.
same problem,dead
i have the same problem i just press the power button with level down(-) audio more than 2 minutes and it boot up. try to press it more than two minutes
rudolph323 said:
I'm having a similar problem, I bought a new leeco pro 3 charger today, original, plugged it in charged until led was green. An hour later noticed fingerprint scanner not working, so i discovered the phone is off, now I can't turn on. I had AICP ROM, the latest one from 21 january.
Click to expand...
Click to collapse
Did you get this working?
mchlbenner said:
Did you get this working?
Click to expand...
Click to collapse
This doesn't happen anymore, it seems. I charged to 100% a week ago (with leeco QC 3 charger) and it didn't turn off.
rudolph323 said:
This doesn't happen anymore, it seems. I charged to 100% a week ago (with leeco QC 3 charger) and it didn't turn off.
Click to expand...
Click to collapse
It actually happened just now. I charged from 38% to 95% I disconnected non-QC charger and went into AccuBattery app looked at the stats and the phone just shut down... Now I can't turn it on. Nothing happens.
I was on the latest AICP ROM
EDIT: I hold down the power button and connected the phone to PC, it turned on to LEECO screen and now red LED is blinking.
rudolph323 said:
It actually happened just now. I charged from 38% to 95% I disconnected non-QC charger and went into AccuBattery app looked at the stats and the phone just shut down... Now I can't turn it on. Nothing happens.
I was on the latest AICP ROM
EDIT: I hold down the power button and connected the phone to PC, it turned on to LEECO screen and now red LED is blinking.
Click to expand...
Click to collapse
Try holding volume up see if you have fastboot.
Sent from my LEX727 using xda premium
Any help?
Hello, I have very similar problem. My Leeco le pro 3 don't charge I try diffrend cables and chargers but when plug-in only orange diode start to blink. Do you have any other ideas what to try?
same problem here. LeEco shut down because of low battery. After plugging the charger in it, the LED only blinks red. Then it vibrates, turns off and starting into the charging mode without charging. Starting TWRP or dotOS is not possible because it shuts down.
nocturnoz said:
same problem here. LeEco shut down because of low battery. After plugging the charger in it, the LED only blinks red. Then it vibrates, turns off and starting into the charging mode without charging. Starting TWRP or dotOS is not possible because it shuts down.
Click to expand...
Click to collapse
Mine is installed the same rom, and today It had the same problem.
mmcarvaxd said:
Mine is installed the same rom, and today It had the same problem.
Click to expand...
Click to collapse
Problem is "solved". I was able to boot inti TWRP and charged from zero to 10%. After that after few trys it was possible to boot into the ROM to charge the battery to 100%.

LG G6 not turning on after full charge !

So i turned my phone off and let it charge until 100 percent. When i took off the charger, i tried to power it on. It vibrated and didnt turn on ever since. I read something about overcharging the battery or something but i'm not sure. I tried using the power button and volume down combination but won't power on att all. Any help?
Hold volume up key and connect phone to pc, should enter download mode. Then reset it by holding all buttons.
Dejan Kruljac said:
Hold volume up key and connect phone to pc, should enter download mode. Then reset it by holding all buttons.
Click to expand...
Click to collapse
nothing at all shows up on the screen
Could my battery have gone bad? I doubt it because it was working perfectly before. After i let it sit a full night out of the charger and tried to turn it on, it vibrated and the screen lit a slightly bit but shut off right after. Any ideas?
batch23 said:
Could my battery have gone bad? I doubt it because it was working perfectly before. After i let it sit a full night out of the charger and tried to turn it on, it vibrated and the screen lit a slightly bit but shut off right after. Any ideas?
Click to expand...
Click to collapse
No idea then, if you have warranty take it to LG..

Categories

Resources