Related
Hi I am a newbie I did everything the instructions told me to do but when I put the sd card in my a7 it said bad can't open file what did I do wrong I wiped the a7 I clean the cache I cant figure out what I did wrong I even formatted my micro sd card please help me
SD card had to be formatted as Fat32 not NTFS...
Regards
how do i format it like that
opening update package
i tired it again and it says can't open/sdcard/update.zip(bad)
Geekylj said:
i tired it again and it says can't open/sdcard/update.zip(bad)
Click to expand...
Click to collapse
Update. with a cap U name of file. It will not work.
Geekylj said:
i tired it again and it says can't open/sdcard/update.zip(bad)
Click to expand...
Click to collapse
Also, downloads for Dexter's mods have historically been buggy for many users. The file you download (through 1.3) should be around 100MB. The exact size varies between versions. If the above suggestions don't work for you, try downloading the file again.
If you still have issues with the downloaded file, other users have found download success by using a browser download plugin called flashgot. It only works with Firefox and Thunderbird though.
http://flashgot.net/
I had an issue with the download with similar results to yours. My download was only about 63K whem it should of been a little over 100MB.
I had to start down loading the 1.2 update, that would start to download the whole 1.2 file. I'd cancel the download then download 1.3. For some reason after that it downloaded the complete 1.3 update file and I was able do the update.
So, check your downloaded file size and see if that's you issue. Also make sure you rename it Update with a capitol "U".
how long does the download take? i followed the instructions and my screen went to a picture of an android? and a box and stayed that way.
mattduck said:
how long does the download take? i followed the instructions and my screen went to a picture of an android? and a box and stayed that way.
Click to expand...
Click to collapse
Did you boot into recovery (1. by turning off the unit, then power it on by holding the power button for a second, release, and then hold again until the recovery menu pops up), or did you use the settings menu to run the Update file (2. Open Settings > About device > System updates > Update device)?
If you did option 1, the soft keys on the side of the tablet allow you to navigate from the image you reference (android robot & box):
Search Key = Up
Back Key = Down
Home Key = Menu
Menu Key = Select
When you see the robot, press the Home key to take you to the update menu. Navigate the menu to clear your cache. After the cache wipe is complete, select the option to install Update.zip. Give it about 10min to run through the update, and it should reboot. If it reboots into an Elocity Logo loop, long press the power key until it shuts down. Your next boot should take you into a properly functioning tablet. Depending on the version of the OS you currently have installed, the update may retain your current apps and settings.
I haven't tried option 2 in a while, but it should do everything for you automatically - but it will probably factory reset the tablet and you'll lose any previously installed apps.
thanks. Did not know this when i posted found out byaccident when wipinfg off fingerprints. Wish they sent directions with the A7.
mattduck said:
thanks. Did not know this when i posted found out byaccident when wipinfg off fingerprints. Wish they sent directions with the A7.
Click to expand...
Click to collapse
NP. Did exactly the same thing back in December.
if you have not solved your issue I believe I had simular problem. the file when you download is already a .zip file. So when you rename it just rename it "Update"
Another newbie here with a question.
My new A7 is due to be delivered tomorrow.
From what I have gathered so far from this board is that the Dexter Mod allows you to get apps from google marketplace, correct?
I am not sure which version of firmware will come on the A7 but I am going to assume that it will not be the latest one released in February.
My question is should I do the firmware update first, and then download and install the Dexter Mod?
Thanks in advance.
rharrad said:
Another newbie here with a question.
My new A7 is due to be delivered tomorrow.
From what I have gathered so far from this board is that the Dexter Mod allows you to get apps from google marketplace, correct?
I am not sure which version of firmware will come on the A7 but I am going to assume that it will not be the latest one released in February.
My question is should I do the firmware update first, and then download and install the Dexter Mod?
Thanks in advance.
Click to expand...
Click to collapse
Dexter's mods have all been based on firmware updates from Elocity. He has kindly added market functionality and fixed a few bugs. I don't see any value in updating with Elocity's firmware prior to installing Dexter's latest.
As the other poster said there is no need for the elocity 7 update but if I were youI would keep it handy. I had a problem with the mod and had to reset the device with the old firmware. Also it seems a weird problem with android reading the file as when reading in astro the upddate.zip looked like update.zip.zip. w
Wierd.
So you just write update i dont even capitalize it.
Also want to add as newbie to andrid as well and it makes a huge difference in performance too. Think it is fast now when you put the mod it seemed to increase overall performance for me which I did not expect.
Good luck
Rob
robbbzilla said:
As the other poster said there is no need for the elocity 7 update but if I were youI would keep it handy. I had a problem with the mod and had to reset the device with the old firmware. Also it seems a weird problem with android reading the file as when reading in astro the upddate.zip looked like update.zip.zip. w
Wierd.
So you just write update i dont even capitalize it.
Also want to add as newbie to andrid as well and it makes a huge difference in performance too. Think it is fast now when you put the mod it seemed to increase overall performance for me which I did not expect.
Good luck
Rob
Click to expand...
Click to collapse
That is not an android problem. That is what happens when windows explorer is set to hide known file extensions and people dont think when remaming things.
Please do not insult people because we lack knowledge which is why we are here to figure out what is going on. I had no idea windows explorer was set to hide file extensions. I never set it that way nor was i ever told before now. Now that I know i can do something but I was thinking, maybe i do not know what i am doing but you could offer help without making me feel like an idiot.
Rob
robbbzilla said:
Please do not insult people because we lack knowledge which is why we are here to figure out what is going on. I had no idea windows explorer was set to hide file extensions. I never set it that way nor was i ever told before now. Now that I know i can do something but I was thinking, maybe i do not know what i am doing but you could offer help without making me feel like an idiot.
Rob
Click to expand...
Click to collapse
So it is not OK for me to point out an obvious mistake (seriously, this one is like calling grass purple). BUT it is perfectly fine for you to assume that it is a "problem with android" and disseminate misinformation like its your job.
Yup, I am obviously in the wrong.
It is obvious to you. I made a mistake and never said I was an expert and pointed that out in my response by saying I was a newbie too and this was what happened to me and my best guess was what I said. I never said I knew it was an andriod glitch but because I had no other idea until someone like you with more knowledge chimmed in.
All I am saying is you could have corrected me as a newbie with a sense of friendship and not superiority. I was sharing my experience to help someone else. That is all I want to do. I am no expert and am learning as I go.
I have seen others in linux forums when i started with that with the tone. Maybe it seems like thecolor of grass to you but is not so obvious to others. If I sounded like I was telling people mis information then I apologize. That was not my intention.
It is up to you how you treat others and if it feels like the right thing then that is your right. Just understand that some of us are not out to show we are smarter than anyone else and are just trying to help even when we make wrong assumptions.
Thanks for correcting me and setting the record straight.
Rob
rename teh update - update- DONOT PUT THE ZIP PART.
i had the same problem. i noticed the elocity update did not use the zip in the update name.
I want to know have can i solve my wifi problems without installing new rom on it.
What is the wireless driver, where are they in my system files?
We can fix the camera issues with changing camera lib files. Can i do that for wifi?
Wifi Problem is ;
I can connect wifi, first it was work fine. After several minutes it dropped and not connect any internet, after several seconds it reconnectted. It always keep going this way.
Can you please help me on this?
What ROM version are you running?
B137 stock and modaco.com/content/huawei-u8800-ideos-x5-u8800-modaco-com/342205/23-june-b137-r3-flb-custom-rom-for-the-huawei-u8800-with-online-kitchen/
I have two of them on my clockwork recovery. Both of them have same issue. I want to try other roms, but its too hard for me to give the time for each rom. So i want to try other roms wifi libs, driver, firmwares.
Not a fan of 137s I've tried so far...You should try these versions:
- V100R001C00B136 (Overseas General version) 2011-05-17
- V100R001C17B160CUSTC17D002 (China Unicom) 2011-04-29
http://wiki.modaco.com/index.php/Huawei_Firmware_U8800
To install any of the ROMs, just download the Huawei Firmware you want and unzip it, there should be a folder called "dload" copy that folder and its contents to your sdcard.
Power off phone then hold both volume buttons while powering on the phone, the update should start.
I don't understand why you think it's easier to change a lib/driver and spend a huge amount of time trying to get it to work, when it takes 30 minutes to install a new ROM and all previous applications, if synced with a Google account. When I first got the phone, I've installed like 6-7 ROMs in a matter of hours...
So, in my opinion, you should try the B160 or B136 before you actually start fiddling around with libs.
katu2006 said:
Not a fan of 137s I've tried so far...You should try these versions:
- V100R001C00B136 (Overseas General version) 2011-05-17
- V100R001C17B160CUSTC17D002 (China Unicom) 2011-04-29
To install any of the ROMs, just download the Huawei Firmware you want and unzip it, there should be a folder called "dload" copy that folder and its contents to your sdcard.
Power off phone then hold both volume buttons while powering on the phone, the update should start.
I don't understand why you think it's easier to change a lib/driver and spend a huge amount of time trying to get it to work, when it takes 30 minutes to install a new ROM and all previous applications, if synced with a Google account. When I first got the phone, I've installed like 6-7 ROMs in a matter of hours...
So, in my opinion, you should try the B160 or B136 before you actually start fiddling around with libs.
Click to expand...
Click to collapse
Are you read my first post ? I Don'T want to try roms. Install new rom, try wifi, over and over. End when find it, wait for the all install downloaded. Chancge launcher and other apps to what you want. It is just boring. I try 4 different froyo roms and nothing seems worked. If i know the what file i must replace, i just have time. Many many more time.
Özgürce said:
Are you read my first post ? I Don'T want to try roms. Install new rom, try wifi, over and over. End when find it, wait for the all install downloaded. Chancge launcher and other apps to what you want. It is just boring. I try 4 different froyo roms and nothing seems worked. If i know the what file i must replace, i just have time. Many many more time.
Click to expand...
Click to collapse
So, stock rom doesn't work too?
Özgürce said:
Are you read my first post ? I Don'T want to try roms. Install new rom, try wifi, over and over. End when find it, wait for the all install downloaded. Chancge launcher and other apps to what you want. It is just boring. I try 4 different froyo roms and nothing seems worked. If i know the what file i must replace, i just have time. Many many more time.
Click to expand...
Click to collapse
) I've read your post, but if you think this is windows, where you can just change the wifi drivers, you're in for a treat . The newer ROMs wifi is fine, so whatever you're doing, you're obviously not doing it right or you have a faulty phone.
katu2006 said:
) I've read your post, but if you think this is windows, where you can just change the wifi drivers, you're in for a treat . The newer ROMs wifi is fine, so whatever you're doing, you're obviously not doing it right or you have a faulty phone.
Click to expand...
Click to collapse
I don't understand a thing from your post. Are you understand me?
IF IS A WINDOWS, I CAN CHANGE DRIVER FROM SYSTEM32/DRIVERS. Or install new driver for it. Newer roms are for WHO ? Mine and other my friends in turkey, have same problem. Even they updated the B137 with updata.app from original sources.
Please if you don't know or understand my post, just leave it to be. Obviosly i can't decribe my problem to you.
The whole windows thing was a comparison...All I was trying to say is that upgrading drivers is NOT EASY, as the problem may not be in the lib file.
You better go and learn some ENGLISH, before you try and understand the answers you're given. ) quote "Are you understand me?"
Very very few people have wifi problems like you are experiencing. This isn't to say it doesn't happen as obviously you are having issues, but it's not a rom issues. It's likely that your problem is either a hardware issue with the phone or an issue with your router settings.
Currently there aren't any alternative wifi libs you can try since all the roms are using exactly the same wifi libs which are located in the kernel image, not the system.
I've been experiencing the same problem -international B136 ROM- however I think it may be the router that is the cause of it. Whilst in the main house with the new wireless g router, no issues, everything works fine. In my extension with the old wireless b router the problem happens all the time.
The problem doesn't really bother me to much, but I thought I'd add my 2 cents just in case you were after some more information on the issue =)
guys, I recommend reading my post in the general section with subject "Wifi Client Tuning ... solve connection problem "
Sent from my IDEOS X5
i have simillar wifi problem. When i connect my airties modem,my internet connection is vere very slowly(60-80kpps as speedtest program) How can i fix this problem? Do you think b136 or b160 could fix it?
fukul2027 said:
i have simillar wifi problem. When i connect my airties modem,my internet connection is vere very slowly(60-80kpps as speedtest program) How can i fix this problem? Do you think b136 or b160 could fix it?
Click to expand...
Click to collapse
Definitely, if you've got something like B133, the first thing you have to do is upgrade to 136-137 or 160. You will see huge improvements in terms of Wifi.
is there any problem in b136 or b160? Which one should i apply?
In my view, the best of stock ROMs is B160. The battery lasts longer and it's got less problems.
how can i see my rom version? and do u send offical b160's link?
Go to Settings >>About Phone and scroll down to Build Number. It should look like this U8800V100R001C00B133SP01 and the bit that interests you is B133 or whatever version you've got.
Since Modaco Wiki is down, try this link:
http://www.filefactory.com/f/0f067250fb54623e/
B160 is called China Unicom in that list.
I've managed to get a cached version of Modaco Wiki that is currently down.
http://webcache.googleusercontent.c...&hl=en&ct=clnk&gl=au&source=www.google.com.au
A direct link to b160 from Huawei - http://www.huaweidevice.com/tcpsdow...me=U8800 V100R001C17B160CUSTC17D002(中国联通).zip
My rom seems to b136 is it change anything?
March 4 updates
. delete ADW desktop replacement back to the original Huawei desktop
. repair the house keys did not respond
. delete the default first screen changes, and now brush into will not be changed to the first screen IDEOS
Sina microblogging: gently drifted across the summer if there are problems you can contact with me in a timely manner
ROM Description:
one using the official kernel
. delete Notepad, add the millet memo
. delete all Google programs and other unwanted program
. beautify the digital power
5 to join root, the search key to the lock screen, volume keys wake up
6. unlock the FPS to 55
7. modify the search key for the lock screen, by adding volume to wake up
. software zipalign optimization
. Join the BRAVIA_ENGINE video picture optimization engine
10.GPU rendering turned on by default TS optimization, touch screen response speed optimization, open JIT accelerated
11.Host is to shield a large number of ads
12. speed up GPS positioning
13. optimize wifi stability
14. improve call quality. Open support for the AMR wideband / HD Audio
15. to enhance image quality, the Sony camera engine
16 integrated third-party software in the data folder, easy to remove, including: RE Manager, titanium backup, DSP equalizer, Baidu input method
addition integrated dolphins browser, if you like the ROM, I do use the dolphins to the browser a few minutes, so can I increase the amount of activation, thank you
can brush into the after the end of the package wipe sensory 2.3
tutorial:
1. ensure drive correctly installation and storage Carry dload folder under the premise turned off, press and hold the volume + and volume - keys, then press and hold the power button, three button Do not let go until you reach the pink screen
. connected to the computer with the following recovery.img new file to replace the computer appear in the image folder in the letter recovery.img file. (The downloaded file to extract the compressed package in order to get recovery.img)
then pull the battery, reboot, Brush package (zip file) into the memory card (if you do not have a memory card into the phone memory also)
4. In shutdown mode, press Volume +, and then press the power button, do not let go, knowing that the user interface screen to enter the Chinese recovery. Please turn two empty the data option, will make it clear all programs, please make a backup, backup backup programs data can be used titanium, magic music, pea pods, backup contacts SMS, or QQ synchronization assistant backup contacts SMS
5 and then select the Brush package installed from the SD card to find the Brush package location selection, the success of the Brush restart the brush into the service packs or service packs do not need to WIPE emptied directly from the SD card in the Recovery interface, install the brush machine package, find the Brush package location Select Brush successful restart.
Note: recovery, touch-sensitive keys, normal use, from left to right four key followed by return, up, down, confirm key
http://www.mediafire.com/?17e3jafhtfi2zi0
Edit:Xda for u8800pro has so little posts for new roms (official or custom) where chinese forums are full of new roms every day even hour...so i took the chance to post a rom here that im using!!The description is translated from chinese i hope you understand the basics..if you wan't more roms im happy to post them let give some power to our forum!! greetz!
Hey! I am using the same ROM as you! Tell me.. is the youtube working for you? In my case it says about some connection problems..
dherma said:
Hey! I am using the same ROM as you! Tell me.. is the youtube working for you? In my case it says about some connection problems..
Click to expand...
Click to collapse
The first time for some reasons youtube and map give me an FC i unistall them from market and reinstall them and working great!!try it!
I Have B512 Can I Install This?
---------- Post added at 06:03 PM ---------- Previous post was at 05:59 PM ----------
This IS Chinese Or English?
husen4u said:
I Have B512 Can I Install This?
---------- Post added at 06:03 PM ---------- Previous post was at 05:59 PM ----------
This IS Chinese Or English?
Click to expand...
Click to collapse
You can and its only first start chinese you can go to settings and change to english!!
my friend pikachukaki i have the 2.3.5 official but i have some issues
the sd card makes "mourlies" i cant format it i cant access it some times and the rotation doesnt work
do these work fine here? i need just to flash it through cwm?
didicola said:
my friend pikachukaki i have the 2.3.5 official but i have some issues
the sd card makes "mourlies" i cant format it i cant access it some times and the rotation doesnt work
do these work fine here? i need just to flash it through cwm?
Click to expand...
Click to collapse
It took me 5 minutes to understand the mourlies think untill i saw your flag!xaxa!!This sounds like a sd card problem...take backup of all the things you have inside and format it (slow) on your pc if you have sd reader fat32!i haven't found any of those problems with this rom!!
pikachukaki said:
It took me 5 minutes to understand the mourlies think untill i saw your flag!xaxa!!This sounds like a sd card problem...take backup of all the things you have inside and format it (slow) on your pc if you have sd reader fat32!i haven't found any of those problems with this rom!!
Click to expand...
Click to collapse
i updated the phone of a friend from 2.2.2 wind to 2.3.5 but he has some issues
and now i try to find out what is happening! do you have any rom to suggest for every day use stable and "fast"?
thanks my friend!!!
didicola said:
i updated the phone of a friend from 2.2.2 wind to 2.3.5 but he has some issues
and now i try to find out what is happening! do you have any rom to suggest for every day use stable and "fast"?
thanks my friend!!!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1541998
help,I can not add account, it just restart the phone, ask for help.
thanks you !
Is This ROM OverClocking?
quangcon1980 said:
help,I can not add account, it just restart the phone, ask for help.
thanks you !
Click to expand...
Click to collapse
I had same problem. And why on earth someone removes android market
In china market didn't work or works not so good like in other countries. They have own market. This ROM is made for china users only.
Sent from my ragelis
bronxitas said:
In china market didn't work or works not so good like in other countries. They have own market. This ROM is made for china users only.
Sent from my ragelis
Click to expand...
Click to collapse
I never had those problems...just flash gapps!!
pikachukaki said:
I never had those problems...just flash gapps!!
Click to expand...
Click to collapse
hello pikachukaki please, do you know something about some "language packs" to add to the chinese rom ?
Last week I have seen some "language pack" for MIUI 2.3.9, but yesterday I have searched it here again and seem to be disappeared. This is not a problem, I already have it, but want know on wich ROM it can be applied (without brick the phone ;-) ) many thanks
mariosbbs said:
hello pikachukaki please, do you know something about some "language packs" to add to the chinese rom ?
Last week I have seen some "language pack" for MIUI 2.3.9, but yesterday I have searched it here again and seem to be disappeared. This is not a problem, I already have it, but want know on wich ROM it can be applied (without brick the phone ;-) ) many thanks
Click to expand...
Click to collapse
To the rom they made for...you translate the apks one by one you can't port them to other rom!!
Need HELP @ Note 3 ( SM-N9002 / SM-N9009 ) SIM2 Call Audio/Mic Routing & MagMa-NX ROM
Got my hands on this one beautiful piece of Samsung Galaxy Note3 SM-N9002 Dual-Sim, and it had this odd version of Chinese samsung rom on it, as it comes from factory, half apps installed that comes with it was in Chinese and had no play store etc and was on 4.xx android, so I went and did my research, found working TWRP, managed to install it OK, then tried few beautiful ROM versions and found MagMa-NX (note7 ported ROM) works wonderfully well, zero crashes etc etc and it also has kernel support for SM-N9002 during installation which I chose to use, all features work 100% and everything works ok, all but SIM#2 call audio.
I mean, I have signal on both sim cards simultaneously OK, I can make and receive calls and all would seem ok, but when dialed to or from SIM#2 there is no audio coming out from earpiece or loudspeaker and mic dont seem to activate as even if I try to record call which feels like muted for both caller and receiver ends, call audio recorder while recording does not pick up any sound trough phone microphones, so I think its something to do with settings in some file not done right or else I dont know what I could be doing wrong.
both sim cards worked 100% ok before ROM flash, but now I'm lost because I cant even flash back to old stock rom, and yes I have gathered original android 4.xx rom but it fails flashing via ODIN every time, so my best bet is on doing some DIY on current MagMa-NX note7 port rom... I wonder if there are any fellows who I could buy the paypal-beer for great help sorting me out on this DIY project? Please PM me or post here if you feel like you could collaborate in resolving this dilemma for me... would highly appreciate folks
I will keep an eye out
I think I figured something. Everytime I attempt to make a phone call on this, I get to choose from which sim card should I dial, #1 or #2 , but what I have noticed now is that I am being asked "SIM1" or "Slot2" ... SLOT 2 I thought? That may be the reason that audio routing doesnt work well for this... tried searching build.prop but this string is not there and I just dont know where to search for this string to get this fixed, anybody can chime in?
Thanks
Did you figure it out ? As i have the same problem with the same rom in addition that when i call anyone and he is on a call i don't get notified with " call waiting
Mr.Ultimate said:
Got my hands on this one beautiful piece of Samsung Galaxy Note3 SM-N9002 Dual-Sim, and it had this odd version of Chinese samsung rom on it, as it comes from factory, half apps installed that comes with it was in Chinese and had no play store etc and was on 4.xx android, so I went and did my research, found working TWRP, managed to install it OK, then tried few beautiful ROM versions and found MagMa-NX (note7 ported ROM) works wonderfully well, zero crashes etc etc and it also has kernel support for SM-N9002 during installation which I chose to use, all features work 100% and everything works ok, all but SIM#2 call audio.
I mean, I have signal on both sim cards simultaneously OK, I can make and receive calls and all would seem ok, but when dialed to or from SIM#2 there is no audio coming out from earpiece or loudspeaker and mic dont seem to activate as even if I try to record call which feels like muted for both caller and receiver ends, call audio recorder while recording does not pick up any sound trough phone microphones, so I think its something to do with settings in some file not done right or else I dont know what I could be doing wrong.
both sim cards worked 100% ok before ROM flash, but now I'm lost because I cant even flash back to old stock rom, and yes I have gathered original android 4.xx rom but it fails flashing via ODIN every time, so my best bet is on doing some DIY on current MagMa-NX note7 port rom... I wonder if there are any fellows who I could buy the paypal-beer for great help sorting me out on this DIY project? Please PM me or post here if you feel like you could collaborate in resolving this dilemma for me... would highly appreciate folks
I will keep an eye out
Click to expand...
Click to collapse
Which CSC did you choose?
I did not figure anything out guys... as I was trying to get this working, I tried every CSC option possible... none worked. Which should have been the one that's working for this models?
in fact Im thinking of selling this beauty of note3, its almost new... in case someone interested I have it... because I would love note7 port rom on this, and nothing else... PS I could live with it being just single-sim option, it works but not perfect as sim #2 is useless then... signal there and texts only works for it as described above...
at the moment its on stock adroid 5.0 and its all 100% ok and fine, flawless, but its boring!
Mr.Ultimate said:
I did not figure anything out guys... as I was trying to get this working, I tried every CSC option possible... none worked. Which should have been the one that's working for this models?
in fact Im thinking of selling this beauty of note3, its almost new... in case someone interested I have it... because I would love note7 port rom on this, and nothing else... PS I could live with it being just single-sim option, it works but not perfect as sim #2 is useless then... signal there and texts only works for it as described above...
at the moment its on stock adroid 5.0 and its all 100% ok and fine, flawless, but its boring!
Click to expand...
Click to collapse
Well, i know that mixer paths are different on single sim and dual sim phones.
Can you extract from stock rom the file "/system/etc/mixer_paths.xml" and overwrite the one in custom rom ?
I think I tried something similar if not exact with no success .. let me repeat the process just in case...
PS also, I will try and dump both versions of these files. Is there anything else I may need to dump from stock rom 5.0 rom?
Mr.Ultimate said:
I think I tried something similar if not exact with no success .. let me repeat the process just in case...
PS also, I will try and dump both versions of these files. Is there anything else I may need to dump from stock rom 5.0 rom?
Click to expand...
Click to collapse
There are some specific binaries and libs, but i'm pretty sure magma rom already inject them during flash when you select n9002 as variant.
Dumping the CSC folder is a good idea too.
zlazaar said:
There are some specific binaries and libs, but i'm pretty sure magma rom already inject them during flash when you select n9002 as variant.
Dumping the CSC folder is a good idea too.
Click to expand...
Click to collapse
cool, which is the csc folder to be exact? will there should there be any conflicts between 5.0 stock android and 6.0 in magma rom when doing CSC trick?
thanks
Mr.Ultimate said:
cool, which is the csc folder to be exact? will there should there be any conflicts between 5.0 stock android and 6.0 in magma rom when doing CSC trick?
thanks
Click to expand...
Click to collapse
Path : /system/csc
Indeed, conflits may happen. But just dump it and let we examine it.
Ok here is what I managed to try, I backed up stock rom android 5.0 all working state mixer files from etc dir, then flashed magma rom again, backed up those same files for restoration to working state, replaced files with ones extracted while on 5.0 stock android, reboot device, no sound whatsoever, phone wont even buzz keypad dialtones or connect dial phonecalls just hangs. So I went and restored back original magmanx rom mixer files, reboot, but still no success... so now I have just finished restoring 5.0 again, will dump csc folder and share with you. will also need to charge my battery a bit because @ 30% cant expect much to happen when flashing magma nx...
Thanks for the help amigo!!!
Alright, tried merging csc from 5.0 to magmanx 6.0, no luck. then tried after this to merge mixer file from 5.0 to magmanx 6.0 , no luck, back at square1....
files attatched both versions... obviously something wasnt done right from looong time ago and had never been reported, been forgotten... in regards of 9002 users..
https://forum.xda-developers.com/attachment.php?attachmentid=4154927&stc=1&d=1495202856
Mr.Ultimate said:
Alright, tried merging csc from 5.0 to magmanx 6.0, no luck. then tried after this to merge mixer file from 5.0 to magmanx 6.0 , no luck, back at square1....
files attatched both versions... obviously something wasnt done right from looong time ago and had never been reported, been forgotten... in regards of 9002 users..
https://forum.xda-developers.com/attachment.php?attachmentid=4154927&stc=1&d=1495202856
Click to expand...
Click to collapse
Indeed, the mixer_paths of TW6 is missing the whole part concerning "cp2" (second sim).
I'm not a reel dev but i tried to add missing parts from TW5.
Can you please try the attached mixer_paths on magma ? (don't touch csc).
zlazaar said:
Indeed, the mixer_paths of TW6 is missing the whole part concerning "cp2" (second sim).
I'm not a reel dev but i tried to add missing parts from TW5.
Can you please try the attached mixer_paths on magma ? (don't touch csc).
Click to expand...
Click to collapse
amazing, will try in few mins
no success, exact same fail of global audio post merging files... any more ideas... ? really appreciate your effort man, really do!
Mr.Ultimate said:
no success, exact same fail of global audio post merging files... any more ideas... ? really appreciate your effort man, really do!
Click to expand...
Click to collapse
Did you checked correct permissions before reboot ?
I'm afraid the problem is deeper than mixer paths.
I'll try to digg more.
I enable root explorer in third party file manage, grant permission, copy file from sd card to system/etc, prompt to overwrite -grant, overwrite complete, power off phone from power-button menu, power on, done. is this bad/incorrect procedure? magmanx has root from stock, when I navigate root dir I get access grant prompt, I grant it and then I can modify whatever.
please let me know what else I could do? maybe there are specific files I could look in to dump out of working 5.0 rom? Thanks!
or maybe just directory content filenames that could/would make sense by their name etc?
its weird, I think its something to do with the kernel itself... maybe Im wrong, but I dont think 9002/9008 kernels were ever made properly to be tested thus the errors... I cant even find any other kernels for 9002 other than included in magmanx and it aint working well anyway
Mr.Ultimate said:
I enable root explorer in third party file manage, grant permission, copy file from sd card to system/etc, prompt to overwrite -grant, overwrite complete, power off phone from power-button menu, power on, done. is this bad/incorrect procedure? magmanx has root from stock, when I navigate root dir I get access grant prompt, I grant it and then I can modify whatever.
please let me know what else I could do? maybe there are specific files I could look in to dump out of working 5.0 rom? Thanks!
or maybe just directory content filenames that could/would make sense by their name etc?
its weird, I think its something to do with the kernel itself... maybe Im wrong, but I dont think 9002/9008 kernels were ever made properly to be tested thus the errors... I cant even find any other kernels for 9002 other than included in magmanx and it aint working well anyway
Click to expand...
Click to collapse
The file "mixer_paths.xml" must have permission set to 0644 (like other files in /system/etc directory).
And try darklord Kernel.
6044 is as per read/write permissions for user enabled, as per this link http://permissions-calculator.org/decode/0644/ , I assume these permissions will auto set after moving replacing file do they not?
Where do I obtain the darklord kernel? I was pretty sure it comes with it... let me re-do the rom and take some snips as I go
Mr.Ultimate said:
6044 is as per read/write permissions for user enabled, as per this link http://permissions-calculator.org/decode/0644/ , I assume these permissions will auto set after moving replacing file do they not?
Where do I obtain the darklord kernel? I was pretty sure it comes with it... let me re-do the rom and take some snips as I go
Click to expand...
Click to collapse
Sorry i just noticed you already have darklord kernel.
And set permission like other files in this directory (if not already done by your file manager).
Hey guys so last time I used it a few months ago this was how I got Samsung Gear VR working on my LG V20 rom. For those DEVs that would like to add this feature I thought we could all work together to get this on every device that is running 1440p screen just for quality reasons.
This is for devs only not a flash able zip.
Extract the contents and just copy and paste the info in the build prop.
Change Log
Version 1 - What has worked as of 4/4/17 on the LG V20 Ti-X Rom
Downloads
Version 4/10/2017
Mega NZ - http://bit.ly/2nZ9f9S
Colabs with other devs
colab with other devs 2
dc13 said:
colab with other devs 2
Click to expand...
Click to collapse
Possible to slim it down (Apps)? To include 174Mb in the System is a bit much for that few Users who'd own a Gear VR. Maybe I'll be better if You provide it as flashable Zip. If You need help with that i could be Your Man!
BR and cool stuff btw!
De-odexing could be also a good Step besides pulling it from the System Image instead of dumping it from a running System. But just a suggestion....
Im about to compress those apps to see how much i can save but i need to finish installing a new os. If you want to make a zipable you can ill post it up and can givw u access to the google drive.
I know this is probably a stupid question, but I'll ask anyway:
Where do you copy the contents of the app-private folder
Are there any other instructions? I remember I had to get this to work on a rooted samsung and I thought there was suppose to be some service running for the gear vr software to kick off when the device is connected.
kingdruid said:
I know this is probably a stupid question, but I'll ask anyway:
Where do you copy the contents of the app-private folder
Are there any other instructions? I remember I had to get this to work on a rooted samsung and I thought there was suppose to be some service running for the gear vr software to kick off when the device is connected.
Click to expand...
Click to collapse
The /system/priv-app/ folder
dc13 said:
Im about to compress those apps to see how much i can save but i need to finish installing a new os. If you want to make a zipable you can ill post it up and can givw u access to the google drive.
Click to expand...
Click to collapse
[email protected]
I will make a lovely flashable AROMA based ZIP this Weekend. I can also improve the Size a bit by using my optimized Compression methods. Think the Size isn't that important as standalone ZIP, but some Users have slow connections and bad Data Plans...
I don't own the Gear VR but things like that have to be supported! It's a step in the right direction (Android shouldn't be used to include OEM exclusive Features dear Samsung! Share them!)
BR
So I understand you copy it to app-private in data, but that doesnt give you the software. Does anyone. Have a zip with the required apks needed to actually launch the vr setup wizard?
Miustone said:
Possible to slim it down (Apps)? To include 174Mb in the System is a bit much for that few Users who'd own a Gear VR. Maybe I'll be better if You provide it as flashable Zip. If You need help with that i could be Your Man!
BR and cool stuff btw!
De-odexing could be also a good Step besides pulling it from the System Image instead of dumping it from a running System. But just a suggestion....
Click to expand...
Click to collapse
200MB is not that much gain when most roms will have 500MB+ removed and the system portion would be un changed so free space would be sitting there to be taken up.
kingdruid said:
So I understand you copy it to app-private in data, but that doesnt give you the software. Does anyone. Have a zip with the required apks needed to actually launch the vr setup wizard?
Click to expand...
Click to collapse
if you copy this into your rom flash it you will have access to samsung gear vr on your phone.
dc13 said:
if you copy this into your rom flash it you will have access to samsung gear vr on your phone.
Click to expand...
Click to collapse
Oh so this has to be done before you even flash your phone, you can't add Gear VR functionality after your phone has already been flashed. Sorry I misunderstood.
It would be cool if this was a separate package that could be added to an existing phone with root access.
My way was just how to add ot to a none flashed rom if you throw these files in your system clear cache is should work also if you set the permissions correct
dc13 said:
My way was just how to add ot to a none flashed rom if you throw these files in your system clear cache is should work also if you set the permissions correct
Click to expand...
Click to collapse
Would you still copy it to app-private in that situation? I tried that and it wiped the folders from the app-private, but did not install any of the applications.
Nougat 7.0 lg v20 sprint. Maybe I am better off installing your rom which will just have it working???
this is great news been trying to get this working on my S7 active ! tried boot.prop changes but no different
as its just software stopping it working, as hardware is pretty much identical ..
did try from here https://forum.xda-developers.com/mobile-vr/gear-vr/port-gear-vr-software-to-android-device-t3540402
but couldnt get it to copy properly, so wouldnt work ..
once rooted, is it just a case of coping over, can this be done via say ES.Explorer ? ..
does this then enable the auto detection when pluging in ? and the touch pad and buttons too ? ..
This looks super interesting. I've got a V20 running AOSP & I'm going to play around with it after work
Sent from my ls997 using XDA Labs
kingdruid said:
Would you still copy it to app-private in that situation? I tried that and it wiped the folders from the app-private, but did not install any of the applications.
Nougat 7.0 lg v20 sprint. Maybe I am better off installing your rom which will just have it working???
Click to expand...
Click to collapse
If you just copy and paste the folders inside the priv app folder think there's like 7 it will be just fine if you copy the priv app folder it might not merge and just replace. I had to factory reset for the apps to get all the correct permissions not sure why.
miniminus said:
this is great news been trying to get this working on my S7 active ! tried boot.prop changes but no different
as its just software stopping it working, as hardware is pretty much identical ..
did try from here https://forum.xda-developers.com/mobile-vr/gear-vr/port-gear-vr-software-to-android-device-t3540402
but couldnt get it to copy properly, so wouldnt work ..
once rooted, is it just a case of coping over, can this be done via say ES.Explorer ? ..
does this then enable the auto detection when pluging in ? and the touch pad and buttons too ? ..
Click to expand...
Click to collapse
Buttons worker don't remember if it auto started
Is this supposed to work on marshmallow?