Related
I've purchased an unlocked Verizon S7 Edge, model SM-G935V, but haven't received it yet. I'm an AT&T customer. The phone should work on AT&T's network since it's unlocked, but I just realized it'll probably still have Verizon-ified firmware, and might not work with certain AT&T-specific features like HD voice, video calling, or voicemail. How will the Verizon firmware behave when it's on the AT&T network? Can I install the latest AT&T firmware on this phone instead, using a similar method to what people are doing for the 935U firmware? I prefer a stock AT&T firmware rather than a beta or rooting. Thanks in advance!
There's another thread in this forum "Stock Firmware for SM-935A (AT&T)". Should I just flash that to my unlocked SM-935V, and essentially turn it into a 935A? I believe the hardware of all S7 Edge models is identical, so I'm hoping that will work.
I did this and applied the 7.0 update - and now I can't seem to revert to any other software. If I were you, I'd flash the U update and forget about carrier-specific garbage.
raduque said:
I did this and applied the 7.0 update - and now I can't seem to revert to any other software. If I were you, I'd flash the U update and forget about carrier-specific garbage.
Click to expand...
Click to collapse
Thanks. Did you have any problems getting LTE data to work with your 935V once it was on the AT&T network? I saw a few mentions from people saying they could only get slower data connections, until they called AT&T to "provision LTE for their SIM" or something. I get the impression it's not enough just to have an AT&T SIM card - like the AT&T network has a registry of phone IDs, and non-AT&T branded phones won't be in it, and so won't get LTE data.
From browsing the 935U thread, it sounds like that firmware is receiving updates much more slowly than the carrier-specific firmwares. The U firmware also wouldn't provide the missing AT&T-specific features I was looking for, like HD voice or WiFi calling, so I'm not convinced it would really be an improvement over just keeping the Verizon fw. But maybe I'll feel differently once I actually get my hands on the phone and play with it - all I'm doing now is reading forum threads and checking my mailbox.
Honestly couldn't tell you. I'm on Verizon with my main device (S7e on U FW). I only flashed the AT&T FW (PK1) so I could flash the unreleased Nougat files.
Now, I can't seem to flash anything but an AT&T rom.
Also FWIW, the U firmware is getting updates slower than carrier roms, but it's still the better rom - untouched by the carrier's bumbling idiot of a dev team, no pre-loaded carrier junk you can't get rid of (only disable), better battery life and better performance.
More FWIW, I don't care about HD Voice or Wifi calling - both those are irrelevant to me.
At&t release today on 2/17/17 official update to Nougat 7.0 build BQA6 with February security.
Clicking from Edge of Galaxy.
I want to do the opposite - flash G935V onto G935A, with the intention of eventually being able to flash back G935A. Not sure if I could do this, though.
Sent from my SM-G930V using Tapatalk
I've got my phone working now. The short answer is yes, as far as I've found, you can flash any carrier's firmware to your S7 Edge. There may be some limitations if the bootloader version on your phone is different from the new firmware's bootloader version, but fortunately I didn't run into that. I went from the Verizon firmware to the AT&T firmware and then to the unbranded 935U firmware.
But for best results, a branded S7 Edge should be used with the same branded firmware, and on the same network. Otherwise you may run into some problems, or certain carrier-specific features won't work. In my case, my Verizon-branded S7 Edge is unable to get Wifi calling and HD Voice (aka VoLTE) on the AT&T network with an AT&T SIM card, no matter what firmware version I use.
s.chamberlin said:
I've got my phone working now. The short answer is yes, as far as I've found, you can flash any carrier's firmware to your S7 Edge. There may be some limitations if the bootloader version on your phone is different from the new firmware's bootloader version, but fortunately I didn't run into that. I went from the Verizon firmware to the AT&T firmware and then to the unbranded 935U firmware.
But for best results, a branded S7 Edge should be used with the same branded firmware, and on the same network. Otherwise you may run into some problems, or certain carrier-specific features won't work. In my case, my Verizon-branded S7 Edge is unable to get Wifi calling and HD Voice (aka VoLTE) on the AT&T network with an AT&T SIM card, no matter what firmware version I use.
Click to expand...
Click to collapse
Really? That's strange. I successfully flashed V firmware on my A and HD voice & WiFi Capping are active
Sent from my SM-G935V using Tapatalk
So you did the opposite direction of what I did? I've read that AT&T is more restrictive about these features than some other carriers, which is maybe why it didn't work for me. I can't find it now, but there was an AT&T community forums thread in which a rep straight-out said that those features won't work on a non-AT&T-branded phone or other unlocked "bring your own device" phone.
To be fair, I'm not certain HD Voice isn't working, since there doesn't seem be a definitive way to test for it. With the AT&T firmware, attempting to turn on wifi calling would give me an error saying it couldn't be activated on my device. With the unbranded 935U firmware and an AT&T SIM card installed, I don't even see an option for turning on wifi calling.
I got the official Oreo on the u firmware, does anyone else have it and what are your thoughts i.e. Battery and screen on time, it seems a little faster to me.
cmlucht said:
I got the official Oreo on the u firmware, does anyone else have it and what are your thoughts i.e. Battery and screen on time, it seems a little faster to me.
Click to expand...
Click to collapse
I just flashed the stock Oreo G935UUEU4CRG2 firmware (Vzw) today. I will run it bone stock for a week and report back. I should be able to tell if there's a significant difference in battery life and performance from the stock V firmware because I've never rooted my S7 edge and have run the stock Verizon firmware since new. With this Oreo U firmware, I do hate how Samsung Pay has that quick launch edge feature at the bottom of the homescreen that can't be removed.
I am very interested in the U version of the firmware . I have the Verizon Galaxy S7 Edge G935V w/ Android 8.0 but use it on Straight Talk with their AT&T sim card.
I had to change it from CDMA to GSM, also had to add a new APN for Straight talk.
It works but the phone is missing LTE bands 12 and 17. Band 17 is used in my area and without it the phone connects
to a different band and its weak in my area.
I am trying to learn if I can put the G935U (AT&T) firmware on the G935V and will I get band 17.
I know band 17 is in my area because of my previous phone of a week ago, Nexus 5.
Would you know if it can be done, and where would I find recent info how to do this
along with what bands and features would be offered or not available.
Thanks,
Ken
tx_dbs_tx said:
I just flashed the stock Oreo G935UUEU4CRG2 firmware (Vzw) today. I will run it bone stock for a week and report back. I should be able to tell if there's a significant difference in battery life and performance from the stock V firmware because I've never rooted my S7 edge and have run the stock Verizon firmware since new. With this Oreo U firmware, I do hate how Samsung Pay has that quick launch edge feature at the bottom of the homescreen that can't be removed.
Click to expand...
Click to collapse
On my G935V, flashed with U Nougat firmware I have received the Oreo U upgrade.
It works great, the only issue is that it reverted the LTE bands to the typical V version bands. I had to re-activate the other LTE bands, just because... I can. My provider is still a Verizon MVNO, and VoLTE is working.
What I like about the Oreo is the Bluetooth codecs - besides the aptX and Samsung HD (UHQ) now Google provided native support for LDAC (Sony). I couldn't wait to get that, because I really wanted my Sony's MDR-1ABT headphones to be used in their full glory (LDAC codec).
PS: To appreciate the quality difference you need to listen to FLAC files.
KenKK said:
I am very interested in the U version of the firmware . I have the Verizon Galaxy S7 Edge G935V w/ Android 8.0 but use it on Straight Talk with their AT&T sim card.
I had to change it from CDMA to GSM, also had to add a new APN for Straight talk.
It works but the phone is missing LTE bands 12 and 17. Band 17 is used in my area and without it the phone connects
to a different band and its weak in my area.
I am trying to learn if I can put the G935U (AT&T) firmware on the G935V and will I get band 17.
I know band 17 is in my area because of my previous phone of a week ago, Nexus 5.
Would you know if it can be done, and where would I find recent info how to do this
along with what bands and features would be offered or not available.
Thanks,
Ken
Click to expand...
Click to collapse
Ken, first check out the supported bands between the Verizon and the AT&T S7 edge in the link below. It will confirm the discrepancy in supported bands between the two models.
https://www.phonemore.com/compare/p...5v-vs-samsung-galaxy-s7-edge-sm-g935a/3296028
Then go to this link and download, extract and Odin flash the AT&T "U" firmware and see if that will open up the AT&T bands for your Verizon S7 edge. It very well might. I think you should also choose the option in Odin to "Clear EFS" before you flash so that it can be rewritten fresh upon bootup with your AT&T sim card. Do this and report back your results. Good luck.
https://updato.com/firmware-archive-select-model?record=0A1AF06A906411E89F15FA163EE8F90B
Thank you for your reply.
I am downloading the firmware G935U (AT&T) firmware now. Its going to take several hours because I am not a member of that download site.
I did he A/B comparison and both phones seem to be identical except for the band coverage. The AT&T has band 12 which from my reading
is 700MHz and it includes the segment band 17 has so if I understand it right if I have band 12 I should be in good shape.
It also seems to have all the bands of the 935V except for band 13. The 935A has actually more bands of coverage.
Could you clear something up for me. Once I do this I am reading I can't go back to the Version S7 Edge G935V.
However would I be able to convert it to one of the other carriers like T-mobile ?
You are the first that stated to check the EFS box.
With ODIN I will be choosing all 4 files but making sure I do NOT choose the HOME file, is that correct?
After flashing are there any other special instructions I need to do or will the phone right after flashing just
need to go through the normal setup along with possible adding the same APN config I am using with it on Straight talk w/ the straight talk AT&T sim?
thank you,
Ken
tx_dbs_tx said:
Ken, first check out the supported bands between the Verizon and the AT&T S7 edge in the link below. It will confirm the discrepancy in supported bands between the two models.
https://www.phonemore.com/compare/p...5v-vs-samsung-galaxy-s7-edge-sm-g935a/3296028
Then go to this link and download, extract and Odin flash the AT&T "U" firmware and see if that will open up the AT&T bands for your Verizon S7 edge. It very well might. I think you should also choose the option in Odin to "Clear EFS" before you flash so that it can be rewritten fresh upon bootup with your AT&T sim card. Do this and report back your results. Good luck.
https://updato.com/firmware-archive-select-model?record=0A1AF06A906411E89F15FA163EE8F90B
Click to expand...
Click to collapse
KenKK said:
Thank you for your reply.
I am downloading the firmware G935U (AT&T) firmware now. Its going to take several hours because I am not a member of that download site.
I did he A/B comparison and both phones seem to be identical except for the band coverage. The AT&T has band 12 which from my reading
is 700MHz and it includes the segment band 17 has so if I understand it right if I have band 12 I should be in good shape.
It also seems to have all the bands of the 935V except for band 13. The 935A has actually more bands of coverage.
Could you clear something up for me. Once I do this I am reading I can't go back to the Version S7 Edge G935V.
However would I be able to convert it to one of the other carriers like T-mobile ?
You are the first that stated to check the EFS box.
With ODIN I will be choosing all 4 files but making sure I do NOT choose the HOME file, is that correct?
After flashing are there any other special instructions I need to do or will the phone right after flashing just
need to go through the normal setup along with possible adding the same APN config I am using with it on Straight talk w/ the straight talk AT&T sim?
thank you,
Ken
Click to expand...
Click to collapse
Yes you can go back to the stock verizon firmware.
There's two csc files in the firmware pack CSC_HOME will not wipe everything and the regular CSC wipes everything. You need to choose the regular CSC so it wipes everything. So backup your internal storage if needed. You may or may not need to manually enter your straight talk APN. Your SIM and APN should be detected upon first boot. Just make sure you choose the regular CSC file and not the CSC_HOME. You want to wipe everything and start fresh. If your APN doesn't automatically populate after flashing the rom then enter it manually. You should have no problems with this version of the U firmware.
G935V to G935U (AT&T)
If its written I have not found it yet but it would be nice to have a before and after as far as what you will gain and what you will loose after the firmware flash. It would cut down
on all the follow up questions, especially for me.
After flashing, you said I can return to stock firmware. Its strange I am reading you cannot return due to a BL that will not be compatible anymore with the Verizon firmware.
The G935V has been taking updates when it was on Verizon. Will this continue after changing it from a G935V (Verizon) to a G935U (AT&T) while on Straight Talk with their AT&T sim?
Does this G935U (AT&T) flash change any specific characteristics of the phone like its serial number and model #? I ask because the Samsung Smart Switch program besides
backing up your phone can also return it to stock (in case something corrupts it) and I am wondering if I give it the current serial# and model number G935V, will there be any problems since its model number firmware will be different.
I was advised when using ODIN under "Options" to check "Phone EFS Clear" . Does this still sound right. All other settings should stay as is.
Thank you,
Ken
tx_dbs_tx said:
Yes you can go back to the stock verizon firmware.
There's two csc files in the firmware pack CSC_HOME will not wipe everything and the regular CSC wipes everything. You need to choose the regular CSC so it wipes everything. So backup your internal storage if needed. You may or may not need to manually enter your straight talk APN. Your SIM and APN should be detected upon first boot. Just make sure you choose the regular CSC file and not the CSC_HOME. You want to wipe everything and start fresh. If your APN doesn't automatically populate after flashing the rom then enter it manually. You should have no problems with this version of the U firmware.
Click to expand...
Click to collapse
Q: After flashing, you said I can return to stock firmware. Its strange I am reading you cannot return due to a BL that will not be compatible anymore with the Verizon firmware.
A: When you flash a different U.S. firmware it has a bootloader included in the firmware. They can be flashed between the different U.S. firmware with no issue. the only time you may not be able to flash a firmware and bootloader is when you attempt to "downgrade your firmware to an earlier version.
Q: The G935V has been taking updates when it was on Verizon. Will this continue after changing it from a G935V (Verizon) to a G935U (AT&T) while on Straight Talk with their AT&T sim?
A: Yes, but the updates may not come as often as the carrier version of the firmwares such as Verizon, sprint, T-Mobile or AT&T. But you will get updates. It seems the carrier firmware will bring more frequent security patch updates than the "U" firmware.
Q: Does this G935U (AT&T) flash change any specific characteristics of the phone like its serial number and model #? I ask because the Samsung Smart Switch program besides
backing up your phone can also return it to stock (in case something corrupts it) and I am wondering if I give it the current serial# and model number G935V, will there be any problems since its model number firmware will be different.
A: No. The model#, IMEI, etc will not be affected. Only the software version will be affected as well as carrier specific update compatibility will be lost due to the "U" firmware.
Q: I was advised when using ODIN under "Options" to check "Phone EFS Clear" . Does this still sound right. All other settings should stay as is.
A: Yes. If you are having issues with network configs, you can choose to wipe efs so that it will rebuild upon first boot of the new firmware. This is only recommended if you have issues connecting to the network. Otherwise don't do it.
Since I'm on a roll I have another quesiton,
I dd a side by side comparison on this site
https://www.phonemore.com/compare/p...5u-vs-samsung-galaxy-s7-edge-sm-g935a/5532054
The phone called G935U has several more bands than the 935A (AT&T). Would this be a different G935U flash as compared
to the G935U (AT&T) ? If so would that not be the firmware to go with? It covers CDMA as well as GSM with the extra GSM bands.
This would be very similar to my G935V which offers CDMA and GSM.
Do I have it right NO CDMA capabilities on the G935U (AT&T) firmware?
Thank you for your replies its been very helpful. Its been a mystery trying to find out
what features you end up with with G935U and if their is a non provider version like in the above link.
Thank you
Ken
tx_dbs_tx said:
Q: After flashing, you said I can return to stock firmware. Its strange I am reading you cannot return due to a BL that will not be compatible anymore with the Verizon firmware.
A: When you flash a different U.S. firmware it has a bootloader included in the firmware. They can be flashed between the different U.S. firmware with no issue. the only time you may not be able to flash a firmware and bootloader is when you attempt to "downgrade your firmware to an earlier version.
Q: The G935V has been taking updates when it was on Verizon. Will this continue after changing it from a G935V (Verizon) to a G935U (AT&T) while on Straight Talk with their AT&T sim?
A: Yes, but the updates may not come as often as the carrier version of the firmwares such as Verizon, sprint, T-Mobile or AT&T. But you will get updates. It seems the carrier firmware will bring more frequent security patch updates than the "U" firmware.
Q: Does this G935U (AT&T) flash change any specific characteristics of the phone like its serial number and model #? I ask because the Samsung Smart Switch program besides
backing up your phone can also return it to stock (in case something corrupts it) and I am wondering if I give it the current serial# and model number G935V, will there be any problems since its model number firmware will be different.
A: No. The model#, IMEI, etc will not be affected. Only the software version will be affected as well as carrier specific update compatibility will be lost due to the "U" firmware.
Q: I was advised when using ODIN under "Options" to check "Phone EFS Clear" . Does this still sound right. All other settings should stay as is.
A: Yes. If you are having issues with network configs, you can choose to wipe efs so that it will rebuild upon first boot of the new firmware. This is only recommended if you have issues connecting to the network. Otherwise don't do it.
Click to expand...
Click to collapse
G935U Product Code USC vs. G935U (AT&T
Last night I flashed my G935U. It took 3 tries with the 3rd working after switching to a different ODIN reversion.
The phone works fine, no issues except I am disappointed I lost all the CDMA capabilities should I want to try straight talk with a Verizon sim.
After I flashed the file from the updato.com site I searched and found another G935U with Product Code USC. USA
https://updato.com/firmware-archive-select-model?record=05B44581906411E89F15FA163EE8F90B
A little more research and I found this is the unbranded version (correct me if I am wrong) The unbranded version appears
to retain CDMA plus have more GSM bands than the G935U (AT&T)
Could anyone offer some details on this firmware and could I have flashed this instead of the G935U (AT&T) to have retained
the CDMA and get more GSM bands.
Thanks, Ken
tx_dbs_tx said:
Ken, first check out the supported bands between the Verizon and the AT&T S7 edge in the link below. It will confirm the discrepancy in supported bands between the two models.
https://www.phonemore.com/compare/p...5v-vs-samsung-galaxy-s7-edge-sm-g935a/3296028
Then go to this link and download, extract and Odin flash the AT&T "U" firmware and see if that will open up the AT&T bands for your Verizon S7 edge. It very well might. I think you should also choose the option in Odin to "Clear EFS" before you flash so that it can be rewritten fresh upon bootup with your AT&T sim card. Do this and report back your results. Good luck.
https://updato.com/firmware-archive-select-model?record=0A1AF06A906411E89F15FA163EE8F90B
Click to expand...
Click to collapse
In my experience flashing another version will not add the bands. My case - I have flashed the "U" version on my "V" branded S7 Edge and the bands remained for Verizon. The modem firmware will read something that is flashed in the modem hardware and activate only those bands. There is a way to force other bands (see below).
More so, having the "U" Nougat, with modded LTE bands, I got the "U" Oreo upgrade from Samsung. After the upgrade to the "U" Oreo, the LTE bands reverted to the "V" ones (I had to re-enable them again).
I did "force" in the NV the new bands on my V using QPST and QXD professional Qualcomm tools, but since I don't really have a T-Mobile SIM I can't verify if the change works or it is something hardware (like RF amps) that is really missing.
How to: https://forum.xda-developers.com/galaxy-s5/general/how-to-add-rf-lte-frequency-bands-to-t2886059
The stock value for the "V" hardware, in the NV cell #6828 is 4190. That corresponds to LTE bands 2,3,4,5,7,13 (check with the LTE calculator).
I have changed the value to 2062440470751 that corresponds to bands 1,2,3,4,5,7,8,12,13,20,25,26,29,30,38,39,40,41 (close to what U would have natively). Again, I couldn't test if the software change is sufficient for them to actually work, but I have a feeling it does not.
When I traveled recently to EU, I have used cellmapper to check the LTE bands. I never saw B20, even if, on the map of that country, B20 was available in that rural location. I had only 3G.
G935U vs G935U
I posted the wrong link
This is the one I have my question on
https://www.phonemore.com/compare/p...5u-vs-samsung-galaxy-s7-edge-sm-g935a/5532054
This compares a G935U vs. a G935A
To get to the chase, what firmware would I flash to get the features of the G935U (left picture)
I just flashed my phone with the G935U (AT&T) and although it works fine with no AT&T bloatware it is missing
some of the GSM bands of the G935U (Left picture) and all of the CDMA bands.
Thank you,
Ken
Like I said above, the different firmware does NOT change the LTE bands.
KenKK said:
Last night I flashed my G935U. It took 3 tries with the 3rd working after switching to a different ODIN reversion.
The phone works fine, no issues except I am disappointed I lost all the CDMA capabilities should I want to try straight talk with a Verizon sim.
After I flashed the file from the updato.com site I searched and found another G935U with Product Code USC. USA
https://updato.com/firmware-archive-select-model?record=05B44581906411E89F15FA163EE8F90B
A little more research and I found this is the unbranded version (correct me if I am wrong) The unbranded version appears
to retain CDMA plus have more GSM bands than the G935U (AT&T)
Could anyone offer some details on this firmware and could I have flashed this instead of the G935U (AT&T) to have retained
the CDMA and get more GSM bands.
Thanks, Ken
Click to expand...
Click to collapse
G935U with Product Code USC is the "U.S. Cellular" network. I believe the way it works is the software will use the installed SIM to configure the network compatibility mode that will be available in network settings. The true "U" model of the S7 edge will have hard coded support for whichever bands samsung determines for that model number. The different versions of the "U" firmware are specific for whichever carrier/network the phone will be used on. I'm not sure which firmware would allow both GSM and CDMA networks to function simultaneously, but there is an app in google Play store called "network mode" and you could give it a try and see if it will open up simultaneous GSM/CDMA support in your network settings. I do know that Sprint's firmware does have GSM and CDMA support and I'm familiar with that because I have had sprint for nearly 10 years and have a lot of experience with the samsung software as I've built several ROM's including port ROM's over the past few years. Try the Sprint "XAS" firmware. That's the global version.
Hey Everybody,
So I've come to realize that my unlocked US S10+ on AT&T didn't have VOLTE or Wifi calling as options in the communication/call settings menus. this is pretty disappointing as it seems that using the unlocked phone with Verizon you get these features, and they make a decent impact on my use of the phone.
My understanding is if I flash the ATT firmware to the phone I would get the functions, so being an amateur I followed some simple guides to SamFirm AND ODIN, and downloaded the ATT CSC firmware for my model number. However after going through the Odin process and resetting my phone it is still showing the same Software information as prior to my installation, and I do not have the features.
I saw a thread on the board stating that the ATT firmware isn't available yet, so I'm not sure if what I downloaded was actually any different than what is on my phone,and my phones "Service Provider Software Version" did already have ATT in the description, which is a bit confusing to me.
Am I correct in understanding the only way to get the features would be through a firmware flash? And would anyone know if I had flashed the right firmware, and what the original firmware CSC would be for my model if I needed to revert?
My information is:
Model Number:
SM-G975U1 (S10+ ceramic white 512GB - Unlocked US)
Service Provider SW ver.:
SOAMC_SM-G975U1_OYM_ATT_PP_0018
R38M205LY2B
ATT/ATT/XAA
Firmware file obtained from SamFirm:
SM-G975U1_1_20190225093814_9wyh9qbuyg_fac
AP file name for reference:
AP_G975U1UEU1ASBA_CL15445662_QB22243196_REV00_user_low_ship_MULTI_CERT_meta_OS9.tar
If it's anything like the S9 was, you can't just ODIN the firmware/CSC. You'll just get the bloat with none of the features you want.
Goronok said:
If it's anything like the S9 was, you can't just ODIN the firmware/CSC. You'll just get the bloat with none of the features you want.
Click to expand...
Click to collapse
I've heard this as well. If you want those features on a Samsung phone, it has to be at&t branded. I ordered an at&t phone from Samsung since I make good use of wifi calling. It works fine on my unlocked P3XL but no dice on the Samsungs.
I have the same phone and service and when I went to update my imei they told me it could not find the phone. So I was without lte/4g for a day until I gave them a imei to a s8 active. Now I have data at least
Darthshadow666 said:
Hey Everybody,
So I've come to realize that my unlocked US S10+ on AT&T didn't have VOLTE or Wifi calling as options in the communication/call settings menus. this is pretty disappointing as it seems that using the unlocked phone with Verizon you get these features, and they make a decent impact on my use of the phone.
My understanding is if I flash the ATT firmware to the phone I would get the functions, so being an amateur I followed some simple guides to SamFirm AND ODIN, and downloaded the ATT CSC firmware for my model number. However after going through the Odin process and resetting my phone it is still showing the same Software information as prior to my installation, and I do not have the features.
I saw a thread on the board stating that the ATT firmware isn't available yet, so I'm not sure if what I downloaded was actually any different than what is on my phone,and my phones "Service Provider Software Version" did already have ATT in the description, which is a bit confusing to me.
Am I correct in understanding the only way to get the features would be through a firmware flash? And would anyone know if I had flashed the right firmware, and what the original firmware CSC would be for my model if I needed to revert?
My information is:
Model Number:
SM-G975U1 (S10+ ceramic white 512GB - Unlocked US)
Service Provider SW ver.:
SOAMC_SM-G975U1_OYM_ATT_PP_0018
R38M205LY2B
ATT/ATT/XAA
Firmware file obtained from SamFirm:
SM-G975U1_1_20190225093814_9wyh9qbuyg_fac
AP file name for reference:
AP_G975U1UEU1ASBA_CL15445662_QB22243196_REV00_user_low_ship_MULTI_CERT_meta_OS9.tar
Click to expand...
Click to collapse
Service Provider SW ver.:
SOAMC_SM-G975U1_OYM_ATT_PP_0018
R38M205LY2B
ATT/ATT/XAA
So I have the same service provider software, on my unlocked s10+, however when I went into an ATT store and looked at a branded S10+
I noticed the service provider software version to be : SOAMC_SM-G975U1_OYM_ATT_PP_0033( thirty three at end),
so anyway to update the service provider version? does that come from the SIM ??
I have an unlocked S10 plus and I flashed the AT&T Firmware. I now have VoLTE and WiFi calling unlocked on my phone using AT&T. You need to make sure you flash the U version of the firmware, not the U1 one. Unlocked S10 is using the U1 firmware already so flashing that one again changes nothing.
beethoven1854 said:
I have an unlocked S10 plus and I flashed the AT&T Firmware. I now have VoLTE and WiFi calling unlocked on my phone using AT&T. You need to make sure you flash the U version of the firmware, not the U1 one. Unlocked S10 is using the U1 firmware already so flashing that one again changes nothing.
Click to expand...
Click to collapse
Where did you get the att firmware?
Sent from my SM-G975U using Tapatalk
I kinda doubt it but did any of you with unlocked phones that flashed the AT&T firmware get any better service? I've been considering it to get VOLTE but just wondered
jamgam said:
I kinda doubt it but did any of you with unlocked phones that flashed the AT&T firmware get any better service? I've been considering it to get VOLTE but just wondered
Click to expand...
Click to collapse
I followed this thread https://forum.xda-developers.com/galaxy-s10/how-to/att-ota-ota-updates-t3909697
At first like you I downloaded the wrong version and nothing changed. I finally flashed G975USQU1ASBA and now have VOLTE/WIFI Calling and of course all of the bloat. But at least those two functions are working. Make sure that you complete a clean flash when I did a dirty flash I had problems sticking on the loading screen.
I believe you just need to call in ATT to take care those carrier specific features .
Which firmware can I flash with Odin to my S10+ Xfinity Mobile unlocked to get AT&T OTA updates? Currently have ASF7 flashed from the latest unknown firmware uploaded to Sammobile. I flashed w/o USERDATA. I just want to be able to get future OTA updates as I just switched my carrier from Metro by T-Mobile to AT&T. I was using U1 US unlocked firmwares on my Note9 & S10+ but want to use carrier perks now with AT&T.
What's with AT&T being the only ones to not release update files? You would think they all would be required to release them. More AT&T customers need kick up a fuss about it.
Today the wife and I jumped ship from Verizon and brought our own S7 Edges(935V) devices to Tmobile. My phone is running the 935U Android 8.0 firmware already from Verizon and works great on TMobile service. Her phone on the other hand is G935V on official Verizon firmware still. Her phone works great on TMobile just as mine but her phone is still on Android 7.0 Verizon official. As far as taking updates now or reflashing with Odin,would it be safe to flash her phone with U firm from TMobile? Are all the U firms the same? Would flashing the TMo firmware help any at all with the tmobile radios and such? Any help greatly appreciated! Enjoying the TMobile service so far! Way better service here in Lansing,Michigan with Tmo than the Verizon.
I've used both the G935U and the G935T firmware on my S7 edge from Verizon no problem on the TMo network. People have said the U Firmware radio doesn't have quite the signal detection range as the others, but you might just be sacrificing a bar of service for more consistent connectivity.
Eventually I ended up using the G935T firmware instead because the TMobile bloatware helped my wife manage her account and such. If her phone was still on Verizon Official and needed flashed for a non developer, I would go with the Tmobile firmware just for less confusion.
The Verizon S7's really were never carrier locked in the first place, and the S7 has universal modem firmware.
Hi guys, need some advice on S10+.
I'm from an Asia country and last year I bought a new S10+ from a online seller which does grey imports for mobile phones, because I want a Snapdragon version over the Exynos, which is what most Asia countries get.
The Model number (SM-975U) and Baseband version (G975USQS3CTB6) are indicating this is a US variant but I can't tell which carrier it is because there is no carrier logo on the phone or when I turn on the phone, no bloatwares as well.
The only down side is this Baseband/carrier does not have updates since March 2020. I tried checking for updates but got nothing.
What I try to get:
1. Latest original firmware which will continue to update itself (hopefully)
2. No carrier bloatware
3. No need root or custom roms (Doesnt go well with banking apps)
I have experience rooting and flashing custom firmware on my previous Samsung Galaxy S7 Edge, but I can't remember if I have done unlocking bootloader before, lol.
Need advice on:
1. Which firmware should I choose?
2. I remember XDA forums used to have useful Guide under Sticky Threads but now I don't see it. I hope this guide will be able to help me with what I am trying to do.
3. I probably sound stupid here, is there any flashable settings file that is friendly to Asian region/telco? I am noticing a bit of network weakness on my phone, I hope its just me.
Thanks to anyone who reads this.
You've aquired the US Unlocked Snapdragon variant, it's not associated with any US carrier and it's not bootloader unlocked. Flashing updated FW is likely your best bet, it's available here.
Download Samsung Galaxy S10+ SM-G975U TMK USA (MetroPCS) G975USQS4FUA1 firmware
Fast download latest Samsung Galaxy S10+ firmware SM-G975U from USA (MetroPCS) with G975USQS4FUA1 and Android version 11
www.sammobile.com
The only other option for an update is Samsung's SmartSwitch. Whether or not it's compatible depends on your local service provider.