From the beginning, I experience this issue and it is really a dealbreaker. A phone's main and most important feature is to make and receive calls... I constantly miss a ton of calls almost every 3/5 calls are missed. To the people who call me it says that I am outside network coverage or the call cannot be completed at the moment. At the same time I look at the coverage on the phone and it displays FULL coverage + 4G mobile data running without interruptions. When I try to call or return the missed call I don't have any problems at all. I live in Eastern Europe, the bands seem OK, they are according to the EU standards. Does anyone else have the same problem or does anyone know how to fix it? The OTA updates don't help for now, nor changing the SIM slot.
Related
I am on an AT&T 8525(see signature) running WM 6.1. I am in an area where my phone shows that I am on AT&T's network in the southeast US with 2 bars but I have no service. I cannot make a phone call although I occasionally receive a call, I cannot answer it. I also cannot get any data connection to work except the occasional SMS message. My wife is on T-Mobile with an 8125 and she has about the same coverage although she can make and receive calls about 90% of the time so there is no doubt that we are on the fringe of coverage.
I've tried changing the network band on my phone with no luck(trying to see if for some reason T-Mobile is on something different than AT&T). I tried upgrading my radio ROM as well to see if that would help(see sig) but didn't change anything. In other areas, with just the one bar of signal strength I've been able to make calls 100% of the time. It's only this one area that gives me fits.
I have FieldTest.exe on my phone but must admit that other than looking at the pretty numbers, I don't really know how to interpret the results of that app. Any suggestions?
Rick
I am having same problem, tried something like 3 roms , and it sometimes work for a while then stop working again, i was a new rom when i found it was making calls but no 3G connection, i tried another rom, made few calls then now it is unable to connect to anything , please let me know if you find a solution
Hi all,
I realise there are many discussion threads linking to problems with maintaining connections and so on, but I'd like to ask for advice specifically about the HD2 switching from 'H/3g' down to 'G'.
Basically, I'm finding there is a fair delay between the HD2 being disconnected from a 3g network and needing to switch to 'G'. I'm in a patchy area right now, and I often look down at my phone to see it displaying 'H' or '3G' but with 0 bars. If I attempt to make a call, it sometimes seems to force it down to G, or it just hangs and I need to redial. During the time I'm on 0 bars I appear to not be contactable, i.e. no calls can be received.
Just now I made a call and the other party could barely hear me. I looked at the phone and I was on 0 bars of 3g. I had to disconnect and call back, with the HD2 then stepping down to G. Why couldn't this happen straight away as the 3g connection was struggling?
I'd like to know if there is any way I can force the HD2 to step down to G fast, or whenever there isn't 1 bar of 3g available? My Hermes was very fast at switching between the two, and I could easily hold calls on the road going through different areas with minimal dropouts.
I've been reading threads on here, someone advised changing the setting in 'Band' to another setting then back to 'Auto'. This didn't help for me.
This is probably a radio issue, but I'm on about my 4th radio now and am still struggling. On a side note, my HD2 isn't latching on to 3g and holding a steady connection anywhere near as well as my Hermes did, but I'll keep experimenting with radios. How is your HD2 comparing to other 3g devices you have?
Is there anything anyone can advise to ensure that I can actually be contacted when my phone is on and in an area with 100% 2g coverage (besides disabling 3g all together)?
Hope this makes sense.
Network: O2 UK
Location: Tunbridge Wells, South East England
Rom: HTC 1.66
Current radio (will be reflashed with something else today): 2.07.51.22_2
Thanks!
You can flash tmo radios with 1.66?!
Which ones have you tried, for reference.
Can't answer a call.
I'm on AT&T US. I have a T9193. I'm having a similar issue. The phone will not fall back to E or G while ringing or on a call. It just drops the call. By the way I show 5 bars of H and my download speeds are 500-700kbps. The phone bands are both on auto.
If I call my cell from a land line, I hear 2 rings then a fast busy. It does NOT fall back to voicemail. I can't pick the HD2 up at home at all. I wait for the caller ID then force the phone band to GSM then call the person back. It's not random at all. It is EVERY call.
If the phone is on EDGE it works fine for voice.
I have tried the 2.07.50 default radio and now I'm running the 2.10.50.
I use the SIM from my trusty x7500 as my main number and it's 2 years old. I also tried my backup number with is a SIM from last October.
I'm lost at this point and ready to back to my cracked x7500. At least I can make a phone call. That is what these things are supposed to do right?
Hi All,
I have a Galaxy Note 4 SM-N910F with BTU firmware N910FXXU1ANK4 (UK) which I flashed from the older O2 UK firmware N910FXXU1ANJ4 when I bought it.
I am having problems receiving calls and making calls when 4G LTE is enabled on the phone (I get 4G signal bar). When someone calls me my phone rings and the signal bar is 3-5 bars usually and when I slide to answer the phone it seems to answer (timer starts clocking up) and I can't hear anything (sometimes for a split second) and the other person can't hear me, then the person is directly kicked to my voice mail!
If I try to make outgoing calls with 4G enabled it sometimes works but other times it sits there saying "dialling..." then after 10 second or so gives up and stops. If I do manage to call out I get terrible phone recetion breaking up and high pitched noises sometimes. Sometimes it is ok for a while talking but eventually the call drops at some stage.
If I force my phone into 2G only or 2G/3G only then the phone seems to work completely normally.
I have had multiple SIM swaps with no luck.
Samsung walk in repair centre was useless as the empolyees all appeared to be undertrained kids.
O2 was no use saying there is no transmitter faults reported in my area.
Before I try a hard reset and flashing back to the old O2 firmware and then possibly sending my phone away for repair, is there anything else that might be going on here? Has anyone else seen this or know if it is a known problem?
Cheers,
Richard.
laxity said:
Hi All,
I have a Galaxy Note 4 SM-N910F with BTU firmware N910FXXU1ANK4 (UK) which I flashed from the older O2 UK firmware N910FXXU1ANJ4 when I bought it.
I am having problems receiving calls and making calls when 4G LTE is enabled on the phone (I get 4G signal bar). When someone calls me my phone rings and the signal bar is 3-5 bars usually and when I slide to answer the phone it seems to answer (timer starts clocking up) and I can't hear anything (sometimes for a split second) and the other person can't hear me, then the person is directly kicked to my voice mail!
If I try to make outgoing calls with 4G enabled it sometimes works but other times it sits there saying "dialling..." then after 10 second or so gives up and stops. If I do manage to call out I get terrible phone recetion breaking up and high pitched noises sometimes. Sometimes it is ok for a while talking but eventually the call drops at some stage.
If I force my phone into 2G only or 2G/3G only then the phone seems to work completely normally.
I have had multiple SIM swaps with no luck.
Samsung walk in repair centre was useless as the empolyees all appeared to be undertrained kids.
O2 was no use saying there is no transmitter faults reported in my area.
Before I try a hard reset and flashing back to the old O2 firmware and then possibly sending my phone away for repair, is there anything else that might be going on here? Has anyone else seen this or know if it is a known problem?
Cheers,
Richard.
Click to expand...
Click to collapse
Most mobile providers still don't support VoLTE (don't know if that is the case in UK) so your phone needs to go down to 3g/2g when phone call is received.. So maybe there is some problem between BTU and O2 firmware (I am no expert, but may be CSC related)..
I suppose your network selection on 4g/3g/2g automatic mode, not LTE (4G only)?
velimr said:
I suppose your network selection on 4g/3g/2g automatic mode, not LTE (4G only)?
Click to expand...
Click to collapse
I only have the option of :
LTE/WCDMA/GSM (auto connect) - Have the issues with this mode
WCDMA/GSM (auto connect) - No issues in this mode
WCDMA only - not tested
GSM only - No issues in this mode.
In phone dialer hit settings. There should be a volte toggle if there is turn it off.
I don't have any issue like that. 4G turns to 3G or 2G when receiving/taking a call. May be u hav an issue with ur firmware
I've tried flashing back from the BTU UK firmware back to the original O2 UK firmware and the problem remains. I also tried a hard reset afterwards leaving the same issue.
I have noticed that the issue does occur with 3G as well as 4G but it seems to be a bit more stable. 2G seems the most stable.
I have arranged with Samsung to send my Note 4 for repair so hopefully that will resolve the issues.
I have the same problem using 4G. Sent for replacement. Waiting for feedback..
got information that warranty service did find the problem and in a week or so I will get new one
I HAVE THE SAME PROBLEM!!!! THANKS A LOT !!!!! I WAS LIKE CRAZY TRYING WHAT CAN BE WRONG WITH THIS....
In my situation i can
send and receive sms on all mods
I can call in 4g but i can't receive calls when im on 4g... - just only hire is a issue
Last time my charger when i was charging in night get burn and i think meybe form that time... i have phone 3 weeks brand new.
Dears,
whenever I am on a call and then hang up or finish the call, I cannot surface the internet or even make a call after hanging up for a while. I can see that there are packets going to 4g but no reply "upward arrow but no downward arrow that is near 4G icon". It is sending data to 4g but not receiving any response and
also, after finishing the previous call I can not make a new call unless I switch on airplane mode and then switch off or restart my S8 to work normal again.
To revise and better understanding this issue:
1. the S8 works normal and can communicate to Internet and receives calls
2. the problems starts after ending a call, the S8 cannot communicate with the network for a while Internet and calls
3. temporary solution is to go to offline mode then online or restart the phone
4. then it will work fine "Boring Solution"
I am facing this weird problem since day1 with my samsung S8.
any advice?
No body has faced similar issue ?
I have no issues, on At&t.
I have no issues too. I roam a lot with data on. Different carriers within Asia. All ok.
Maybe try reset the carrier "access point names"?
Are you under power saving mode?
i got my S8 it worked fine in start (or i might have not noticed it) but then i observed it used to turn off sim cards (did not catch any signals) as i go out of 34 or 4g covered area. it did not work on 2g. i got i fixed from samsung care. and now i am having weak signal issue. Voila -_-. Going to get it fixed "AGAIN".
I have too signal problum internet and sim service. Very poor.. but when was i buy then it was perfect . After use 4 month its conditions make me very thankless. If any person who know about that issue plz help m
I just flashed G930U firmware (Oreo RG3) on my verizon S7 and overall I'm much happier with my phone. But, sometimes when placing a call with a strong LTE signal, the mobile data disappears and becomes unavailable until the call is completed. The strange thing is that it only happens 50 percent of the time. I've changed my network settings from global to LTE/ CDMA but that doesn't fix the problem. Is this a known issue with the "u" firmware? Or is it perhaps only prevalent on this particular version I installed? Any feedback is appreciated! Thanks!
maxforwardspeed said:
I just flashed G930U firmware (Oreo RG3) on my verizon S7 and overall I'm much happier with my phone. But, sometimes when placing a call with a strong LTE signal, the mobile data disappears and becomes unavailable until the call is completed. The strange thing is that it only happens 50 percent of the time. I've changed my network settings from global to LTE/ CDMA but that doesn't fix the problem. Is this a known issue with the "u" firmware? Or is it perhaps only prevalent on this particular version I installed? Any feedback is appreciated! Thanks!
Click to expand...
Click to collapse
I don't think that the devices stay connected to 4G LTE while on the actual phonecall as it uses the data maybe for the enhanced calling?
I noticed the same change in connections on my Verizon s7 and att s4. It varies and changes during initiated outbound calls or once a call is incoming. Even seconds before incoming calls I see it drop from 4g LTE down to no internet at all. Then without wifi connected during those ones you can't get online while in call. It depends on phone Carrier like Att, Vzw, and even tracfone brand devices.
It usually cuts back to 3g or H+ and even old Edge/gprs or worse, 2g speeds until the calls are complete. Then regular 4g LTE will come back if your phone is working. This is all from personal experience so please don't take what I say over the other developers who might be able to explain what it is happening a little better.
Hope this helps either way!
P.s- It also probably depends on how strong your signal is to determine what speed you will drop down to during calls. Exp. 4g lte,4g,H+,H,3g,2g,edge,gprs,wap.