Database Users

Idiots guide to unlocking sony Z1

After hours of trying different methods to root the z1, and struggling with chinese based apps ... and accidentally wiping the phone ..... nothing manage to root the phone. until i came across the following,
anyways to make life easy i have complied all the steps that you need to do to root the phone from 3 seperate guides. I didnt write this article i just compiled it for easy reading
http://techbeasts.com/2013/12/19/in...ng-latest-14-2-0-a-290-firmware-how-to-guide/
http://techbeasts.com/2013/12/18/in...ers-quickly-with-minimal-tool-on-windows-pc/
http://techbeasts.com/2013/12/18/how-to-unlock-bootloader-of-sony-xperia-devices-guide/
This guide is only for Sony Xperia Z1 C6903/2.
1. Do not try this on any other model, please check your device’s mode in Settings > About Device.
2. The CWM / TWRP recovery is only for Xperia Z1 C6903/C6902 running latest Android 4.3 Jelly Bean 14.2.A.0.290 firmware. Check your firmware version in Settings > About Device and make sure that it matches the one mentioned here.
3. You must have installed Android ADB & Fastboot drivers.
TO INSTALL ADB & Fastboot Drivers tool:
a. Download the Minimal ADB & Fastboot Drivers tool: Link 1 | Link 2
b. Run the minimaltool.exe file that you downloaded and install the tool.
c. You can run the tool now by either through the Start menu, through the icon that you created on the desktop or by opening Program files > Minimal ADB & Fastboot > Right click on an empty area while keeping the shift key pressed and click on “Open Command Window Here”. ( NOTE: just double clicking on the desktop icon opens the command prompt window)
d. Use the Command prompt to do whatever you want now!
e. To install any .img file, you will have to place that file in the Minimal Tool folder that is located under Program files. (in win8.1 its : C:\Program Files (x86)\Minimal ADB and Fastboot)
f. To access the Fastboot mode, you’ll have to first bring the Fastboot mode on your device and then connect it. E.g on HTC devices you can highlight Fastboot mode by accessing it through HBoot and then connect it, while on Sony you can turn off the device and then while keeping the back or volume up key pressed plug in the USB cable.
That’s All! You’ve successfully installed Android ADB & Fastboot drivers. I hope that it didn’t take more than 2 minutes for you.
4. Your device must have an unlocked bootloader. This is the slightly troublesome part but its straight forward.
How to Unlock Bootloader
Install Android ADB & Fastboot Drivers using the quick setup with Minimal tool. Find the guide here.
Now first of all you need to check if your device’s bootloader unlocking is allowed or not, to do so open the dailer on your device.
Type *#*#7378423#*#*.
As soon as you enter the above code, a menu will open up.
Tap Service info > Configuration > Bootloader Unlock. If it says Yes, that means bootloader unlocking is allowed, else you can also find out if the Bootloader is already unlocked.
Now in the dialer type “*#06#”, you should get the IMEI number of your phone. Note it down somewhere
After verifying the bootloader unlock permission, turn off your device completely.
Now open the Minimal ADB and Fastboot command prompt, that you created using the guide above.
Press the back key or Volume Up key on your Xperia Device and connect it to your PC while keeping the key pressed. The back key works for older Xperia devices, while for newer devices Volume Up key will work.
In case you are trying to unlock the bootloader of your Sony Xperia Z1, please make sure that it’s running on latest Android 4.3 Jelly Bean firmware. If you tried to unlock bootloader on Android 4.2.2 firmware, it will cause the camera crash on your device.
In the command prompt type: fastboot.exe -i 0x0fce getvar version and press enter, you should get a response now e.g (0.3). This step is to verify that your device is properly connected or not.
Now open this Pageand accept the legal terms and conditions by Sony to unlock the bootloader.
After accepting the legal terms and conditions, enter your name, your phone’s IMEI number (Remove the last digit of IMEI number) and your email and click Submit button
You should receive an email by Sony immediately, the email has the Key to unlock your phone’s bootloader.
Now again in the command prompt type this com: fastboot.exe -i 0x0fce oem unlock 0xKEY. Repalce KEY with the code that you got in the email by Sony and hit Enter.
As soon as you hit Enter, the bootloader will be unlocked and show you logs in the command prompt.
5 . Please make sure that your phone’s battery is charged at least over 60%. This is highly recommended in order to prevent any power issues during the recovery flashing process.
6. Please make sure that you backup all of your important media content, contacts, call logs and important text messages. This is highly recommended so that in case something goes wrong, you can still restore your data.
7. Use only OEM data cable to establish connection between your PC and Phone.
8. Now that the basics are done.... this is how to root
How to Install TWRP / CWM Recovery on Xperia Z1 C6903 and C6902:
Download your desired recovery.img file:
i recommend philz advance cwm , its easier and you arent required to download supersu
Philz Advance CWM Recovery for Xperia Z1 C6903/2
CWM Recovery for Xperia Z1 C6903/2
TWRP Recovery for Xperia Z1 C6903/2
Place the downloaded Recovery.img file in the Minimal ADB & Fastboot folder that you created using our ADB & Fastboot Quick Setup Guide.
If you are using Android ADB & Fastboot full package, you can place the downloaded Recovery.img file in the Fastboot folder or in the Platform-tools folder.
Open the folder where you placed the Recovery.img file. E.g Minimal ADB & Fastboot or Fastboot or Platform Tools. (in win8.1 its : C:\Program Files (x86)\Minimal ADB and Fastboot)
Press and hold the shift key and right click on an empty area within the folder, and click on “Open Command Window Here”.
Turn off your Xperia Z1 completely.
Now press the Volume Up Key and while keeping it pressed plug in the USB cable.
You should see a blue light in the notification light of your phone, that means your device is now connected in Fastboot mode.
Now type the following command: Fastboot Flash boot Recoveryname.img
You may rename the recovery.img file for your ease of access and replace it with Recoveryname in the command to flash it.
Hit Enter and it will quickly flash CWM / TWRP recovery in your Xperia Z1.
How to Root Sony Xperia Z1 C6903 and C6902:
WITH PhilZ Advance CWM without installing SuperSu:
Boot into recovery (when the sony logo appears on boot press volume up volume down until the recovery loads)
Select Reboot System Now
Select Root device
Your phone will restart
Congrats! You’re rooted now.
WITH SuperSu:
Download the latest SuperSu.zip file.
Place the downloaded SuperSu.zip file on your phone’s sd card.
Boot into CWM / TWRP recovery on your phone.
Select Install Zip / Install > Choose Zip from SD / Ext Sd card > SuperSu.zip
Select Yes and let it flash SuperSu.
As soon as flashing is done, reboot your device.
Find SuperSu in App drawer.
Congrats! You’re rooted now.

You could root Z1 by flashing 14.1.G.1.534 and root with rootkitXperia, but it was too late
If you never use music features related to DRM, it's OK though...
Learn more about TA:
http://forum.xda-developers.com/showthread.php?t=2440597

[GUIDE]Oneplus X MAC Root Guide

This guide will help mac users with rooting their Oneplus X
BEFORE STARTING!
This could void the warranty of your device.
I won’t be held responsible for anything that happens from doing this tutorial so please proceed at your own risk.
All your data will be erased, so please make a back-up!
Please enable usb debugging in developer options(tap 7 times on build number).
Connect your phone to your mac and you will see Oneplus Drivers in your finder.
Double click on AndroidFileTransfer(OSX).dmg
Drag Android File transfer to the programs folder.
Step 1: Setting up ADB and FASBOOT and unlocking the bootloader
- Power off your phone and hold power button+volume up
- The phone should enter fastboot mode
- Go to https://drive.google.com/drive/u/0/folders/0B-baud5R8XkwLWYxcHNmbGZTY1U
and download the 3 files.
- Go ahead and unzip fastboot.zip then copy over the recovery.img file into fastboot folder.
- Open Terminal
- In Terminal type the following with hitting enter at the end of each line:
cd downloads
cd fastboot
chmod 755 *
./fastboot-mac oem unlock
- Your phone will reboot and you will be asked to unlock the bootloader. Just hit the Power button and unplug
your phone
- Phone will reboot
- Setup your phone
- Copy the UPDATE-SuperSU-2.78.zip to the internal storage of your OnePlus X using Android File Transfer.
- Power off your phone and hold power button+volume up, you should enter fastboot.
- Re-connect the USB cable once in fastboot mode.
Step 2: Flashing custom recovery and rooting
- Open terminal
- In Terminal type the following with hitting enter at the end of each line:
./fastboot-mac flash recovery recovery.img
./fastboot-mac erase cache
- Wait for it to finish and unplug your phone
- Hold down power and volume down for 20 seconds.
- The phone should boot into recovery.
- Once in TWRP recovery, choose “Install”
- Choose the Super SU zip file you copied over to your phone earlier.
- Swipe to flash.
- Choose “Reboot System”.
- If twrp asks your to disable stock recovery, swipe to disable.
YOUR OPX WILL REBOOT AND IS NOW ROOTED!
To check, open to superSU app and check for errors, no errors=rooted!
Thanks to https://theunlockr.com/ for the windows tutorial.
Need help ? Post a comment and I will help. :good:
Noticed spelling mistakes? Please let me know

ᕕ( ಠ‿ಠ)ᕗ
Just hijacking this post here to say, way to go buddy !
jk, reserved

Sorry guys, I know this is a very old thread but I've tried this so many times and did not work. My problem is that nothing happens in my device when I type the command to unlock the bootloader using Terminal.
I get the following message: Brunos-MacBook-Pro:fastboot Brunolima$ ./fastboot-mac oem unlock
...
OKAY [ 0.001s]
finished. total time: 0.001s
Brunos-MacBook-Pro:fastboot Brunolima$
And then that's it. It doesn't reboot and when i manually reboot it is in the same state as before.
Any ideas guys?

Hey, I've been trying the same thing. Didn't have your specific issue but I think it may be related to the fact that it's already unlocked.
That said, I to make everything work I basically used this guide + the commands from the official TWRP guide at the page "TWRP for OnePlus X" + the command from a guide in the official OnePlus guide called "[GUIDE] ONYX: How to Unlock Bootloader, Install Custom Recovery, Root, Take EFS Backup & More !!" --- sorry but I can't post links.
All in all the commands I've used where:
adb reboot bootloader
fastboot devices
fastboot oem unlock
fastboot oem device-info
fastboot flash recovery twrp.img
fastboot boot twrp.img
brunolimaam said:
Sorry guys, I know this is a very old thread but I've tried this so many times and did not work. My problem is that nothing happens in my device when I type the command to unlock the bootloader using Terminal.
I get the following message: Brunos-MacBook-Pro:fastboot Brunolima$ ./fastboot-mac oem unlock
...
OKAY [ 0.001s]
finished. total time: 0.001s
Brunos-MacBook-Pro:fastboot Brunolima$
And then that's it. It doesn't reboot and when i manually reboot it is in the same state as before.
Any ideas guys?
Click to expand...
Click to collapse

Moto Z Play | Resources all in one thread

Hey guys
I just thought we should have a 1-stop-guide for our amazing Moto Z Play. Generally people have to look through various threads before obtaining the real info, this thread was created so that people would find the resources easily without wasting time, looking here and there for information.. I will try to update the thread on regular basis as and when the new developments arrive...
Note: I want to thank all the devs for their efforts. None of this is my creation , i just collected & compiled all the info from various sources, credit as usual goes to original devs
PS: The thread is complete now...Just have to add the images for easy understanding...All the info posted here is latest development with correct info...There is no chance you will brick your phone by following this guide unless you do something wrong...
************************************************** ************************************************** ***************
INDEX​************************************************** ************************************************** ***************
Drivers | ADB installer
Unlocking Bootloader (Official Method)
Flashing TWRP and Rooting via TWRP
Back up / Restoring EFS (IMEI)
Restoring original Boot Logo after unlocking bootloader
Installing Xposed Framework
Flashing/ Restoring back to Stock Rom
Changing DPI without root
Remove Ascending Ringtones/Notifications
************************************************** ************************************************** **************
1) Drivers | ADB installer
​1) Motorola Drivers (https://motorola-global-portal.custh...ail/a_id/88481)
2) ADB installer (https://forum.xda-developers.com/sho....php?t=2317790) or (http://forum.xda-developers.com/show...8#post48915118)
_______________________________________
​
2) Unlocking Bootloader (Official Method)
​
Files needed:
1) Motorola Drivers (https://motorola-global-portal.custh...ail/a_id/88481)
2) ADB installed (https://forum.xda-developers.com/sho....php?t=2317790) or (http://forum.xda-developers.com/show...8#post48915118)
Note: Unlocking the bootloader erases all the data on the phone, make a backup of your imp stuff before unlocking
Method:
1) First of all visit this official Moto Unlocking site & register yourself or login via Google
https://motorola-global-portal.custh...-a/action/auth
2) Enable USB debugging & OEM unlock on the phone (Go to settings -> development options (if they do not have it enabled go to settings-> about the phone and below where it says "Compilation number" tap 7 times to activate the development options).. In the developer options, select "OEM unlock" it will ask for password / PIN / pattern and once activated, we look for "Debugging via USB" and we activate it also, then proceed to turn off the phone)
3) Turn on the phone by pressing Vol down + Power button together for 5 seconds until we get a screen like this:
4) Open adb command window and type:
Code:
fastboot devices
If your device appears on the command window you can continue with the guide, if your phone is not listed, install the Moto drivers correctly and verify if adb is working or not...
5) In the same adb command window type:
Code:
fastboot oem get_unlock_data
You will see numbers displayed like this, copy the code and paste it into notepad..Now eliminate the paragraph break so that there is only one line without spaces… Copy the entire code & login into your Moto account…Now paste the code on the same Moto webpage which was given above…
The unlock code will be sent to your registered email. There will appear an email with the number similar to this:
5)Without disconnecting the phone from the PC & without closing the window of the CMD, we return & we put this code:
Code:
fastboot oem unlock (enter code that was provided in the email)
6) You will be asked to re-enter the same command again, re-enter the code to confirm and finally unblock the bootloader
7) After re-entering the command, you will bootloader unlocked message
_______________________________________
3) Flashing TWRP and Rooting via TWRP
​
Note: Custom recovery (TWRP) woks only after unlocking your bootloader… Before flashing this recovery unlock your bootloader and enable USB debugging…
​
Files required:
1) Motorola drivers (https://motorola-global-portal.custh...ail/a_id/88481)
2) ADB installed (https://forum.xda-developers.com/sho....php?t=2317790) or (http://forum.xda-developers.com/show...8#post48915118)
3) TWRP for Moto Z Play (https://mega.nz/#!yZ4lUCYB!-nN0jj2Ws5Z7RNyBT7S8m4gsrdOxTlK3nTjn9zOtx6s)
Method:
1) Download the above recovery, boot the phone in fastboot mode & open adb command window
2) In the adb command window type
Code:
fastboot flash recovery recovery.img
3) After executing the command, disconnect your phone & with the volume + or volume keys - we move until it says "Recovery Mode" . Press the power button to confirm the entry to the recovery.
4) Once you enter the recovery, select the right button & a menu to choose the language is displayed, it only brings Chinese and English so we will put it in English to know what to do.
5) We will see that it asks for a password, it is the same password that you put to encrypt the phone at the beginning when they set up the factory phone and always asks them to turn on the phone, it can be a password / PIN / pattern
6) Once the password has been entered, the recovery main menu will appear, we will go to "Advanced" and then "Install SU", it will ask if we want to root the phone, we accept by sliding and we wait for it to do the process. Then we give in "Reboot System" to restart and the phone will ignite with root
_______________________________________
4) Backing up / Restoring EFS (IMEI)
Note: This works only if you have TWRP recovery... Please backup your EFS using the method below before flashing any rom including stock rom
​
Backing up EFS (IMEI):
Method:
1) Boot the phone into TWRP recovery
2) Go to "Backup"
3) Select EFS
4) Create backup by sliding
5) Once finished, restart the phone
6) After restarting the phone, copy the TWRP folder from the internal memory to the SD, DO NOT CUT and PASTE, just copy with a file browser. Later from the SD card can be copied to the PC
Restoring lost IMEI / EFS:
Method:
1) Boot the phone into TWRP recovery
2) Go to "Restore"
3) Select folder (location where you have kept a backup of your EFS)
4) Restore by sliding
5) Wipe cache and dalvik and start phone normally
_______________________________________
5) Restoring original Boot Logo after unlocking bootloader
​
PS: This is used to remove unlocked bootloader warning when the phone is turned on (the black screen with letters)
Credit goes to : G4liant
Files needed:
1) Motorola drivers (https://motorola-global-portal.custh...ail/a_id/88481)
2) ADB installed (https://forum.xda-developers.com/sho....php?t=2317790) or (http://forum.xda-developers.com/show...8#post48915118)
3) Original Motorola Bootlogo (https://mega.nz/#!zNIFHBiY!hbdgUwl9oWjrXbirwXKijviWW0nS_06MViU48yHmSD4)
Method:
1) Boot the phone in fastboot mode, open adb window on pc and type
Code:
fastboot flash logo logo.bin
2) Once the flashing is finished, restart the phone with this command:
Code:
fastboot reboot
When you turn it on, we will notice that we have the original motorola boot logo again and that the previous warning does not appear even when the bootloader of our device is unlocked
_______________________________________​
6) Installing Xposed Framework
​
Files needed:
1) [FONT=&quot]Have TWRP installed (If not installed refer to section #3 on this thread)
2) Download latest Xposed Installer.zip (http://dl-xda.xposed.info/framework/sdk23/arm/ )
3) Download latest Xposed Apk (https://forum.xda-developers.com/showthread.php?t=3034811)
Optional: Download latest Xposed un-installer but ARM 32 version not ARM 64 (http://dl-xda.xposed.info/framework/uninstaller/ )[/FONT]
Method:
1) Copy Xposed installation .zip, Xposed uninstaller (optional) and the Xposed APK to the internal memory (the TWRP does not mount the external SD so do not bother copying it to the External Memory)
2) Install the Xposed APK but DO NOT open it.
3) Enter recovery mode and open TWRP, Choose language and enter password to decrypt your device
4) Once the password is entered, the main recovery menu will appear, select "Install" and a file manager will appear, we will navigate the file down and look for the Xposed installer .zip, something like this:
5) Select the Xposed installer .zip and it will open a zip installer, slide to accept the flash of the .zip and wait for the process to finish. Then we give in "Wipe Dalvik / cache" and then to "Reboot System" to reboot and the phone will light up with Xposed already working.
_______________________________________
​
7) Flashing/ Restoring back to Stock Rom
​
IMPORTANT: First locate the firmware for your country / operator / area / continent to avoid changing baseband or other things that make the phone does not work as it should.
Credit goes to: Khanov XDA
Stock Rom links:
[FONT=&quot]Stock China
http://www.filefactory.com/file/6814...LT_CFC.xml.zip
Rogers Canada
http://www.filefactory.com/file/57g6...LT_CFC.xml.zip
Retail Latino America
http://www.filefactory.com/file/6pt8...%20%281%29.zip
Retail Latin America
https://mega.nz/#!WBYX3awb!qR1zitz1O...M1tnq1OwWDYDYA
Retail Europe
http://www.filefactory.com/file/4ora...C_EMEA.xml.zip
Retail Canada
http://www.filefactory.com/file/64wm...LT_CFC.xml.zip
Movistar Colombia
http://www.filefactory.com/file/10sv...LT_CFC.xml.zip.
Verizon
http://www.filefactory.com/file/60ty...LT_CFC.xml.zip
A Repository with several firmwares including Indian:
https://mirrors.lolinet.com/firmware...ison/official/[/FONT]
[FONT=&quot]
Files needed: [/FONT]
[FONT=&quot]1) Motorola drivers (https://motorola-global-portal.custh...ail/a_id/88481)
2) ADB installed (https://forum.xda-developers.com/sho....php?t=2317790) or (http://forum.xda-developers.com/show...8#post48915118)
3) Firmware chosen from above links[/FONT]
[FONT=&quot]
[/FONT]
Method 1 (Manually by using adb commands):
1) Boot the phone into fastboot mode and open adb command window on pc
Code:
fastboot devices
This will show us if the phone is correctly connected and installed the drivers, it will detect the PC in fastboot mode and we can continue with the tutorial we will put these commands in the order they are, you can put them one at a time and pressing enter to execute it
Code:
[SIZE=2][B][FONT=Century Gothic]fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash NON-HLOS.bin modem [COLOR=Red]([/COLOR][COLOR=Red][I]can skip this and thus [U]would[/U] prevent loss of IMEI)[/I][/COLOR]
fastboot erase modemst1 [I] [COLOR=Red](can skip this and thus [U]would[/U] prevent loss of IMEI)[/COLOR][/I]
fastboot erase modemst2 [COLOR=Red][I]([/I][/COLOR][COLOR=Red][I]can skip this and thus [U]would[/U] prevent loss of IMEI)[/I][/COLOR]
fastboot flash fsg fsg.mbn [COLOR=Red][I](can skip this and thus [U]would[/U] prevent loss of IMEI)[/I][/COLOR]
fastboot erase cache
fastboot erase userdata [COLOR=Red]([/COLOR][COLOR=Red][I]can skip this and thus [U]would[/U] prevent loss of your data (Internal storage)[/I][/COLOR]
[/FONT][/B][/SIZE][SIZE=2][B][FONT=Century Gothic] fastboot oem fb_mode_clear
fastboot reboot
[/FONT][/B][/SIZE]
Your phone will reboot and will be restored to stock rom
In case an error occurs during OTA, even after doing the above step flash the modem by typing:
NOTE: You will find these files (NON-HLOS.bin, fsg.mbn, adspso.bin etc) along with the systemchunk files you downloaded
Code:
[/FONT][/B][/SIZE][/SIZE][SIZE=2][SIZE=2][B][FONT=Century Gothic]fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp adspso.bin
Now reboot the phone and apply OTA... It will succeed
Method 2 (Using software ; RSD lite to flash) :
Files needed:
1) Motorola drivers (https://motorola-global-portal.custh...ail/a_id/88481)
2) ADB installed (https://forum.xda-developers.com/sho....php?t=2317790) or (http://forum.xda-developers.com/show...8#post48915118)
3) RSD lite (http://rsdlite.com/rsd-lite-download/)
4) Stock Rom from the links provided above
Method:
1) Enable USB debugging
2) Download RSDlite and Stock Rom zip file
3) Open RSDlite and browse button (next to file name textbox)... Find and select "flashfile.xml" from the downloaded zip file (extract the zip file)
4) Boot the phone into fastboot mode and connect the phone to pc; RSD lite shows ID if connected
5) Click start button…Now flashing process has started…It will flash files one by one…Wait for it till it shows reboot…
[FONT=&quot]6) Handset will automatically restart after flashing process completes[/FONT]
_______________________________________
8) Changing DPI without root
​
Files needed:
1) Motorola drivers (https://motorola-global-portal.custh...ail/a_id/88481)
2) ADB installed (https://forum.xda-developers.com/sho....php?t=2317790) or (http://forum.xda-developers.com/show...8#post48915118)
Method:
Note: The DPI used here is 420... You can adjust the DPI according to your own taste... The default DPI is 480
1) Open ADB command window and enter:
Code:
[FONT=Century Gothic][B][B][B][FONT=Century Gothic][B][B][B]adb shell wm density 420[/B][/B][/B][/FONT][/B][/B][/B][/FONT]
2) Reboot your phone to apply the effects system wide
Reverting back to stock DPI:
Method:
1) Open ADB command window and enter:
Code:
[FONT=Century Gothic][B][B][B][FONT=Century Gothic][B][B][B][FONT=Century Gothic][B][B][B][FONT=Century Gothic][B][B][B]adb shell wm density 480"[/B][/B][/B][/FONT] or "[/B][/B][/B][/FONT][FONT=Century Gothic][B][B][B][FONT=Century Gothic][B][B][B][FONT=Century Gothic][B][B][B]adb shell wm size reset" (If the 1st one doesnt work or some apps show wrong layouts like Snapchat etc[/B][/B][/B][/FONT][/B][/B][/B][/FONT][/B][/B][/B][/FONT][/B][/B][/B][/FONT][/B][/B][/B][/FONT]
2) Reboot your phone to apply the effects system wide
_______________________________________
9) Remove Ascending Ringtones/Notifications
Files needed:
1) TWRP
2) Ringtones / Notifications mod (http://cloud.tapatalk.com/s/58221f724bc3b/Ascending_audio_fix_motozplay.zip)
Method:
1) Download the mod and copy it to internal storage. Boot the phone in TWRP
2) Select install and locate the file in the file manager... Select the file and flash it
Reverting back to stock (Ascending ringtones):
Method:
1) Download this file [FONT=&quot]https://www.dropbox.com/s/otsir98jjlqnb85/Ascending_audio_stock_motozplay.zip?dl=0https://www.dropbox.com/s/otsir98jjlqnb85/Ascending_audio_stock_motozplay.zip?dl=0
2) Copy it to internal storage & boot the phone in TWRP... Select install and locate the file
3) Select the file and flash it[/FONT]
​

reserved...

reserved

Nicely work

Really nice thread. Just one thing...
Could you credit me for the modified logo.bin?
https://forum.xda-developers.com/showpost.php?p=69273602&postcount=37

Can I flash logo.bin zip in twrp?

Nope, has to be unzipped and flashed in fastboot, which shouldn't make much of a difference, as it has only to be done once. No need for reflashing after switching your custom rom.

G4liant said:
Really nice thread. Just one thing...
Could you credit me for the modified logo.bin?
https://forum.xda-developers.com/showpost.php?p=69273602&postcount=37
Click to expand...
Click to collapse
Sure man...Edited the OP... :good: Actually i found it on another site it didnt mention anyone so i posted like that only....Anyways nice work

Thanks and very useful.

Hey guys, it takes an incredibly long time to download the stock ROM, anybody have a solution for this? It also just stops and says 'network error' at 0.3gb. So I can't unbrick my phone really.

coolkingler1 said:
Hey guys, it takes an incredibly long time to download the stock ROM, anybody have a solution for this? It also just stops and says 'network error' at 0.3gb. So I can't unbrick my phone really.
Click to expand...
Click to collapse
More firmware found here https://mirrors.lolinet.com/firmware/moto/addison/official/
Sent from my XT1635-02 using XDA-Developers Legacy app

flashallthetime said:
More firmware found here https://mirrors.lolinet.com/firmware/moto/addison/official/
Sent from my XT1635-02 using XDA-Developers Legacy app
Click to expand...
Click to collapse
I found a good mirror at the Rooting thread but thanks!

TWRP flashing file download link dead
3rd section file needed are not expanding when that button is clicked some kind of glitch I think can you share the link directly.

abhilash_s_j said:
3rd section file needed are not expanding when that button is clicked some kind of glitch I think can you share the link directly.
Click to expand...
Click to collapse
Nope works fine for me...anyways here is the direct link:
https://mega.nz/#%21yZ4lUCYB%21-nN0jj2Ws5Z7RNyBT7S8m4gsrdOxTlK3nTjn9zOtx6s

Thank you for the effort

Thanks for your work!
Sent from my Nexus 6 using XDA-Developers Legacy app

TWRP flashing file download link dead
3rd section file needed are not expanding when that button is clicked some kind of glitch I think can you share the link directly.
---------- Post added at 01:37 AM ---------- Previous post was at 01:14 AM ----------
After flashing the original firmware of my device, there is no network signal, i cannot make calls, cannot use data, in general the SIM does not work. Does anyone knows how to solve this?

kkarora said:
TWRP flashing file download link dead
3rd section file needed are not expanding when that button is clicked some kind of glitch I think can you share the link directly.
---------- Post added at 01:37 AM ---------- Previous post was at 01:14 AM ----------
After flashing the original firmware of my device, there is no network signal, i cannot make calls, cannot use data, in general the SIM does not work. Does anyone knows how to solve this?
Click to expand...
Click to collapse
Check your IMEI, I think that you have lost It.

Hitachy said:
Check your IMEI, I think that you have lost It.
Click to expand...
Click to collapse
Yes IMEI is showing 0. How to restore it back...?

kkarora said:
Yes IMEI is showing 0. How to restore it back...?
Click to expand...
Click to collapse
If you have a twrp backup, restore It. If you don't have, assistance.

TWRP-3.2.1-0 for the LeEco Le Max 3

Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about doing this to your device
* YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
TWRP for the LeEco Le Max 3
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download:
https://www.androidfilehost.com/?fid=6006931924117931532
Sources:
Tree: https://github.com/moto999999/android_device_leeco_x10/tree/android-9.0?files=1
Kernel: https://github.com/moto999999/android_kernel_leeco_msm8996
Platform Tools (adb/fastboot):
https://developer.android.com/studio/releases/platform-tools.html#download
Installation:
Make sure your bootloader is unlocked
Code:
Run unlock_bootloader.bat from this zip
[url]https://www.androidfilehost.com/?fid=818222786056032301[/url] and check with
"fastboot oem device-info" if device unlocked and device critical unlocked are both set to true.
If not, reboot to fastboot and run unlock_bootloader.bat again
Download the recovery image from above
Reboot into fastboot
Run this command (Change the .img to whatever the name of file is you downloaded):
Code:
fastboot flash recovery TWRP-x10-3.3.img
Known issues:
You tell me!
Credits:
deadman96385 for the work he has done on for the Le Max 2
jrior001 for his work on TWRP for the Le Max 2 and in general for msm8996-common stuff too
codeworkx for his tweaks I implemented into my TWRP commit and everything he has done for LeEco devices
andr68rus for everything he has done for the LeEco Le Max 2
XDA:DevDB Information
TWRP-3.2.1-0 for the LeEco Le Max 3, Tool/Utility for the LeEco Le Max 2
Contributors
moto999999, codeworkx, ThE_MarD
Version Information
Status: Stable
Created 2018-05-24
Last Updated 2018-05-24

Method is not working on my device (21s), i flashed the file unlock_bootloader.bat and Now i have lost the Access to Fastboot, so i can't flash anything becouse Fastboot mode is not responding, i press the power button and volume - and the phone just reboot, so please be carefull with this, now my phone is stuck without fastboot mode.

julianhrojas said:
Method is not working on my device (21s), i flashed the file unlock_bootloader.bat and Now i have lost the Access to Fastboot, so i can't flash anything becouse Fastboot mode is not responding, i press the power button and volume - and the phone just reboot, so please be carefull with this, now my phone is stuck without fastboot mode.
Click to expand...
Click to collapse
try to write script from notepad
" adb reboot bootloader " and save name.bat
after that try to run the bat file you'll run to fastboot mode
sorry if my english is bad.

All is working excelent work. Just follow instructions.
-unlock bootloader (to me it take 7 attemps so repeat the process until shows unlock critical: true
- flash twrp
- wipe all data wipe-data- yes
- use adb command on twrp to flash all the files that you need: "adb push rom.zip /sdcard"
(Rename the rom file as rom.zip)
-flash the rom
- flash firmware modem
-flash magisk to root
- flash xposed zip
-reboot and wait
All working.

Hi! can someone check if the SafetyNet status is correct please? thank you so much!! D

Is sideload good?

Step by STEP
1. 15 seconds ADB Installer (for Windows) :
https://forum.xda-developers.com/showthread.php?t=2588979
2. Platform Tools (adb/fastboot):
https://developer.android.com/studio/releases/platform-tools
3.Make sure your bootloader is unlocked :
"fastboot oem device-info" --> device unlocked and device critical unlocked need to be " true ".
-->3.1 If not , step by step for unlocking your bootloader
- - - - 3.1 on your Phone go to settings -> About Phone -> Tap On "Build Number" 7 Times , to enable " Developer Options "
- - - - 3.2 Settings -> Developer Options -> enable "OEM Unlock"
- - - - 3.3 Settings -> Developer Options -> enable "USB Debugging"
- - - - 3.4 Now with the device on , conect with usb to pc
- - - - 3.5 Dowload and copy with replace in the platform tools files: https://www.androidfilehost.com/?fid=818222786056032301
- - - - 3.6 Run unlock_bootloader.bat , after that , open command prompt in the folder with the files downloaded , and check with "fastboot oem device-info" if device unlocked and device critical unlocked are both set to true.
Note : If isn't working , try :
- - - - 4.1 Open command prompt in the folder with platform tools
- - - - 4.2 type "adb usb" -> which will confirm the connection on your device
- - - - 4.3 "adb reboot bootloader" brings you to the fastboot mode
-----------------------> Now you are in fastboot mode , for there execute :
fastboot oem unlock-go
fastboot flashing unlock_critical
fastboot flash xbl xbl.elf
fastboot flash xblbak xbl.elf
fastboot flash aboot emmc_appsboot.mbn
fastboot flash abootbak emmc_appsboot.mbn
fastboot oem unlock-go
fastboot flashing unlock_critical
Now check with "fastboot oem device-info" if device unlocked and device critical unlocked are both set to true.
5. If yes then download TWRP: https://www.androidfilehost.com/?fid=890278863836286860 , and copy the .img file in the folder with platform tools
6. Then type in cmd " fastboot flash recovery TWRP-x10.img "
7.Congrats , now you have TWRP , type fastboot reboot and boot into TWRP
---------- Post added at 04:33 PM ---------- Previous post was at 04:29 PM ----------
@moto999999 i made an post with more explained way of instaling the twrp , if you like , you can edit your description ;P

Hi
julianhrojas said:
Method is not working on my device (21s), i flashed the file unlock_bootloader.bat and Now i have lost the Access to Fastboot, so i can't flash anything becouse Fastboot mode is not responding, i press the power button and volume - and the phone just reboot, so please be carefull with this, now my phone is stuck without fastboot mode.
Click to expand...
Click to collapse
Hi, I wanted to remind you that you should check before flashing anything the critical device true.
Ok guys ... it works, I installed it.
I will explain how I did it.
The first thing is to download the files.
Use fastboot tools of the link.
A fastboot tools add unlocked Zip and MAF32.exe from minimal adb.
I did it from EUI6.INSTALE EUI6 BEFORE STARTING.
Put in TF in fastboot mode and connect to the pc.
Open the platform-tools folder that contains all the files plus the TWRP THAT WE SHOULD PLACE INSIDE, ANOTHER.COPY IN THE DESKTOP.
We run the unlocker.bat When it finishes it reboots the TF automatically.
We let it restart before going back to fastboot.
It may happen that it does not return to fastboot. In this case we force recovery and we mark update and cleanup, execute and restart normally.
We put back fastboot.
We verify the state_fastboot oem device-info.
It has to give true in critical.
If it is not true, we execute the .bat again but this time we do not allow it to restart keeping pressing v-
We are in fastboot and check the status again with the command. I did it with two CMD windows open at the same time, one to verify and the other to execute.
The normal thing is that of true in that attempt.
If you do not give it repeat the .bat keeping v
Always check before installing twrp.
We already have true.
In the same window we execute;
fastboot flash recovery (name) .img
It will give ok.
Restart the TF in recovery mode.
30 seconds v + / power at the same time.
Once inside the TWRP.We make wipes of everything except internal storage (those who do not have usb-otg must have copied the ROM to internal storage).
We install the moden, the ROM, the moden again, and restart.
It appears encrypted and asks for a password. We start recovery again and do factory reset.
We normally restart already to configure root etc.
And colorin colorado this post is over.
Again remember that the donations account is still active. This guy deserves heaven so do yourselves.
---------- Post added at 06:03 PM ---------- Previous post was at 05:38 PM ----------
I installed the 21s and it seems that we have a bug. If we turn off the TF it does not turn on normally. It works when connecting the charger or from recovery. Restart does it normally.

Thanks for great work!
What is changed in 5.9.21 customized ROM comparing to Russian version stock 5.9.21?
Do I HAVE TO flash modem file?

Could we have the smae twrp on leeco x950
min1968 said:
Thanks for great work!
What is changed in 5.9.21 customized ROM comparing to Russian version stock 5.9.21?
Do I HAVE TO flash modem file?
Click to expand...
Click to collapse
Thanks for that fantastic work, could we have the same for the leeco x950

X850/ how root and files.
Hi some people has report bugs after rooting.
Sound calls,loss of data and excessive lag.Following these instructions solves that.
Once rooted the tf we must turn it on through recovery or connecting the charger. Do not start pressing v- and power.There are functions that do not go well.
you install the 5.9 21s by fastboot and then do the process.
Good morning everyone.
DRIVERS.
http://dl.adbdriver.com/upload/adbdriver.zip
http://download.clockworkmod.com/tes...iverSetup6.msi
TOOLS (the twrp is included)
https://mega.nz/#F!zp4GjT7B!ueQ-vVKrsAXuMzPknTYaDg
ROMS STOCK.SOLO INSTALL FOR FASTBOOT !!!!
Add this tool (the files it contains) to the files of the chosen ROM.
https://mega.nz/#!CtRUjZ6Z!RT6e9oR8l...HsHN0cegkMUVbI fastboot adb-tools stock
EUI6 - https://mega.nz/#F!r0QUkZBK!L-r4bDHjPkAcGzSbVYZiCQ
5.9 21s - https://mega.nz/#F!j9YWUY7R!eaUC_VDO_OZ9Yo8sqGs-gw
5.9 20s- https://drive.google.com/drive/folde...E1?usp=sharing
aosp x850- https://mega.nz/#!i4BCURaB!X4FX4-TCH...p29IkegRfGeHo0
ROOT
- Start the rooting process from the 21st. Close the accounts leeco and google. Make sure that the critical is blocked. (Fastboot flashing lock_critical) Once done:
We connect the tf in fastboot mode to the pc and open the Tools folder.
We execute the file .bat of the folder, attentive, before finishing we press v- so that it automatically reboots in fastboot mode.
In that same folder ... right and uppercase button, we open command window here and execute -fastboot oem unlock-go
We verify the status of the bootloader with ... fastboot oem device-info
We will have the magazine unlocked and the critical in false.
in the same window that we have not closed we execute ... fastboot flash recovery recovery.img
At the end we will have the twrp installed.
We run again..fastboot reboot keeping v + pressed.
We enter in recovery, we select clean:
Factory reset
Advanced wipes and we mark everything, we must have a usb-otg to put the files after the recovery.
Files uploaded by @ moto999999
https://androidfilehost.com/?w=files&flid=270044
Installation method.
_ system / modem / system --- restart and configuration
_root
_xposed
USEFUL ARCHIVES AND APPLICATIONS:
Nova
https://mega.nz/#!qwpiyCgB!5IrCZiFXF...IOacZuWfCX74fU
Cam
https://mega.nz/#!n1gUDSYb!kCcC4TIgr...YsRuwZWDUEQiBU
Google
https://mega.nz/#!q5QCwYrL!1LiYVoJyS...RaDOgck6ALj-vs
google play store apk mirror,buscar y añadir.
varios:
https://mega.nz/#!zxR23TbR!-qHVRWLBI...4eiU4Fg8dZlaXc

Luis4x4 said:
Hi some people has report bugs after rooting.
Sound calls,loss of data and excessive lag.Following these instructions solves that.
Once rooted the tf we must turn it on through recovery or connecting the charger. Do not start pressing v- and power.There are functions that do not go well.
you install the 5.9 21s by fastboot and then do the process.
Good morning everyone.
DRIVERS.
Click to expand...
Click to collapse
hi, most of your mega link are broken, the url can't read without decrypt key

Twrp is there, but wait, what to flash? No roms for LeMax3 (eui ports are not roms, they are piece od s*)

giaur said:
Twrp is there, but wait, what to flash? No roms for LeMax3 (eui ports are not roms, they are piece od s*)
Click to expand...
Click to collapse
There is an stable EUI 5.9.21S by me , or an semi-stable 7.1.1 android .
And an WIP AOSP ROM ( 6.0.1 ) .
And without kernel sources we can not do nothing about an new ROM :crying:

diamantik said:
1. 15 seconds ADB Installer (for Windows) :
https://forum.xda-developers.com/showthread.php?t=2588979
2. Platform Tools (adb/fastboot):
https://developer.android.com/studio....html#download
3.Make sure your bootloader is unlocked :
"fastboot oem device-info" --> device unlocked and device critical unlocked need to be " true ".
-->3.1 If not , step by step for unlocking your bootloader
- - - - 3.1 on your Phone go to settings -> About Phone -> Tap On "Build Number" 7 Times , to enable " Developer Options "
- - - - 3.2 Settings -> Developer Options -> enable "OEM Unlock"
- - - - 3.3 Settings -> Developer Options -> enable "USB Debugging"
- - - - 3.4 Now with the device on , conect with usb to pc
- - - - 3.5 Dowload and copy with replace in the platform tools files: https://www.androidfilehost.com/?fid=818222786056032301
- - - - 3.6 Run unlock_bootloader.bat , after that , open command promt in the folder with the files downloanded , and check with "fastboot oem device-info" if device unlocked and device critical unlocked are both set to true.
Note : If isn't working , try againg , if still not then :
- - - - 4.1 Open command promt in the folder with platform tools
- - - - 4.2 type "adb usb" -> which will confirm the connection on your device
- - - - 4.3 "adb reboot bootloader" brings you to the fastboot mode
-----------------------> Now you are in fastboot mode , for there execute :
fastboot oem unlock-go
fastboot flashing unlock_critical
fastboot flash xbl xbl.elf
fastboot flash xblbak xbl.elf
fastboot flash aboot emmc_appsboot.mbn
fastboot flash abootbak emmc_appsboot.mbn
fastboot oem unlock-go
fastboot flashing unlock_critical
Now check with "fastboot oem device-info" if device unlocked and device critical unlocked are both set to true.
5. If yes then download TWRP: https://www.androidfilehost.com/?fid=890278863836286860 , and copy the .img file in the folder with platform tools
6. Then type in cmd " fastboot flash recovery TWRP-x10.img "
7.Congrats , now you have TWRP , type fastboot reboot and use it
IF YOU HAVE A PROBLEM WITH - Unlock Boot loader CRITICAL is FALSE mayby you use a bad compilation of ADB and fastboot.
Not every compilation understands the command -> fastboot flashing unlock_critical
Make sure your compilation has the following constituent files:
adb.exe
fastboot.exe
AdbWinApi.dll
AdbWinUsbApi.dll
libwinpthread-1.dll
Important in this compilation is a file libwinpthread-1.dll
Hope I helped you.
Have a nice day
Click to expand...
Click to collapse

Good someone will have the rom of the leeco le turbo x950 and its recovery.

info file
julianhrojas said:
All is working excelent work. Just follow instructions.
-unlock bootloader (to me it take 7 attemps so repeat the process until shows unlock critical: true
- flash twrp
- wipe all data wipe-data- yes
- use adb command on twrp to flash all the files that you need: "adb push rom.zip /sdcard"
(Rename the rom file as rom.zip)
-flash the rom
- flash firmware modem
-flash magisk to root
- flash xposed zip
-reboot and wait
All working.
Click to expand...
Click to collapse
Hi, where are file - flash firmware modem - flash xposed zip for x850 I can not find it on the forum
Thanks

diamantik said:
1. 15 seconds ADB Installer (for Windows) :
https://forum.xda-developers.com/showthread.php?t=2588979
2. Platform Tools (adb/fastboot):
https://developer.android.com/studio....html#download
3.Make sure your bootloader is unlocked :
"fastboot oem device-info" --> device unlocked and device critical unlocked need to be " true ".
-->3.1 If not , step by step for unlocking your bootloader
- - - - 3.1 on your Phone go to settings -> About Phone -> Tap On "Build Number" 7 Times , to enable " Developer Options "
- - - - 3.2 Settings -> Developer Options -> enable "OEM Unlock"
- - - - 3.3 Settings -> Developer Options -> enable "USB Debugging"
- - - - 3.4 Now with the device on , conect with usb to pc
- - - - 3.5 Dowload and copy with replace in the platform tools files: https://www.androidfilehost.com/?fid=818222786056032301
- - - - 3.6 Run unlock_bootloader.bat , after that , open command promt in the folder with the files downloanded , and check with "fastboot oem device-info" if device unlocked and device critical unlocked are both set to true.
Note : If isn't working , try againg , if still not then :
- - - - 4.1 Open command promt in the folder with platform tools
- - - - 4.2 type "adb usb" -> which will confirm the connection on your device
- - - - 4.3 "adb reboot bootloader" brings you to the fastboot mode
-----------------------> Now you are in fastboot mode , for there execute :
fastboot oem unlock-go
fastboot flashing unlock_critical
fastboot flash xbl xbl.elf
fastboot flash xblbak xbl.elf
fastboot flash aboot emmc_appsboot.mbn
fastboot flash abootbak emmc_appsboot.mbn
fastboot oem unlock-go
fastboot flashing unlock_critical
Now check with "fastboot oem device-info" if device unlocked and device critical unlocked are both set to true.
5. If yes then download TWRP: https://www.androidfilehost.com/?fid=890278863836286860 , and copy the .img file in the folder with platform tools
6. Then type in cmd " fastboot flash recovery TWRP-x10.img "
7.Congrats , now you have TWRP , type fastboot reboot and use it
---------- Post added at 04:33 PM ---------- Previous post was at 04:29 PM ----------
@moto999999 i made an post with more explained way of instaling the twrp , if you like , you can edit your description ;P
Click to expand...
Click to collapse
the link doesn't work..
2. Platform Tools (adb/fastboot):
https://developer.android.com/studio....html#download
Can you fix it please?

Is this works on x950?

Hey everyone!
I've updated TWRP to the latest version (3.3) and it's now using a source built kernel! The kernel and tree source is in my GitHub (link in the first post)
Download: https://www.androidfilehost.com/?fid=6006931924117931532

Unlock bootloader on my nokia 6 (2017) TA-1033 Android Pie 9.0

Hello, I would like to unlock bootloader on my nokia 6 (2017) TA-1033 Android Pie 9.0
First of all, I tested the official unlock but, the application tells me that my device is not supported...
I'm looking on the forum but I can't find a method for unlock bootlaoder and install twrp (then magisk for the root if supported)
Thank you very much for your help !

Are you from Mars?
Sent from my TA-1021 using Tapatalk

Loknic4 said:
Are you from Mars?
Sent from my TA-1021 using Tapatalk
Click to expand...
Click to collapse
Not far away, a planet nearby...

After some research, apparently, there is no longer any free way to unlock the bootloader....
So I went to the cash register hoping it would be reliable XD.

For information, I still contacted nokia support
Dear,
Greetings from Nokia mobile care!
Regarding to your question I would like to inform you that it was only available for a brief period of time and is currently unavailable.
Please, this feature can be unlocked after the update. For now we would like to ask you for your patient, for sure soon will be bootloader unlocked for your model!
Please check this! This is our official website and you can learn more about that!
https://www.nokia.com/phones/en_int/bootloader
If you will have more questions feel free to contact us again.
​
Have a nice day.
Best regards
Melody Fichte
[email protected] Mobile Care
Click to expand...
Click to collapse
"for sure soon will be bootloader unlocked for your model!"

arl0ng said:
For information, I still contacted nokia support
"for sure soon will be bootloader unlocked for your model!"
Click to expand...
Click to collapse
Don't trust it

Elvaa said:
Don't trust it
Click to expand...
Click to collapse
Yes, I also have doubts, I'm waiting, anyway, my key to unlock the bootloader
Envoyé de mon TA-1033 en utilisant Tapatalk

Bootloader of my successfully unlocked Nokia 6.0 !
I just had a driver problem on my computer.
If you are in the same case, my problem has been solved by installing "OST tool" :
https://drive.google.com/open?id=1-iwfKu7PHygVV5Ok4_lSibCW4ATeFpBu
run the "launcher.exe" and restart computer
Thanks Techmesto for the key.

arl0ng said:
Bootloader of my successfully unlocked Nokia 6.0 !
I just had a driver problem on my computer.
If you are in the same case, my problem has been solved by installing "OST tool" :
https://drive.google.com/open?id=1-iwfKu7PHygVV5Ok4_lSibCW4ATeFpBu
run the "launcher.exe" and restart computer
Thanks Techmesto for the key.
Click to expand...
Click to collapse
Wanna share the key and instructions?

skooter32 said:
Wanna share the key and instructions?
Click to expand...
Click to collapse
Hello, for the key, I had to buy it on techmesto (thanks to him for the tutorial)
regarding instructions :
Grab the June 2018 OTA file from here => https://android.googleapis.com/pack.../2a84fb0cddebb6ed79e18735740c7386ebd4be1f.zip
Download the full firmware for Nokia 6 => https://drive.google.com/open?id=1twEoVIImRHeFdJ6OQSG4tfkEvtrY_0uJ
Download and install the NOST Tool => https://forum.xda-developers.com/no...t-improved-version-ost-la-6-0-4-v0-4-t3875574
Download and install OST Tool => https://drive.google.com/open?id=1-iwfKu7PHygVV5Ok4_lSibCW4ATeFpBu
(about me, it solved the problem of unrecognized devices)
On your device, go into Settings -> About and find the Build Number and tap on it 7 times to enable developer settings. Press back and go into Developer Options and enable USB debugging.
Connect the phone to the usb port
Copy June 2018 OTA file to SD Card
You will need the platform-tools from the Android SDK on your computer ==> https://developer.android.com/studio/releases/platform-tools
Or use Minimal ADB ==> https://forum.xda-developers.com/showthread.php?t=2317790
On the computer, navigate to ADB’s folder and open a Command Prompt and type:
Code:
adb devices
check if the device is detected correctly
Code:
adb reboot recovery
If you see a “No Command” screen ==> Press and hold Power key and quickly press and release the Volume Up key
Select apply update from SD card and select the update file (June 2018 OTA)
When the update gives an error, reboot to bootloader by selecting the option from recovery mode
Code:
fastboot devices
check if the device is detected correctly
Now use the unlock key to unlock. Do normal unlock and also critical unlock.
Code:
fastboot flash unlock UnlockFile.bin
(UnlockFile.bin = name of the dedication key you purchased and it's easier to place it in the same folder as platform-tools)
Code:
fastboot oem unlock-go
fastboot flash unlock UnlockFile.bin
fastboot flashing unlock_critical
fastboot reboot
If it doesn't reboot, open NOST and flash the full firmware (nb0)
Warning: the battery must be sufficiently charged for NOST

arl0ng said:
Hello, for the key, I had to buy it on techmesto (thanks to him for the tutorial)
regarding instructions :
Grab the June 2018 OTA file from here => https://android.googleapis.com/pack.../2a84fb0cddebb6ed79e18735740c7386ebd4be1f.zip
Download the full firmware for Nokia 6 => https://drive.google.com/open?id=1twEoVIImRHeFdJ6OQSG4tfkEvtrY_0uJ
Download and install the NOST Tool => https://forum.xda-developers.com/no...t-improved-version-ost-la-6-0-4-v0-4-t3875574
Download and install OST Tool => https://drive.google.com/open?id=1-iwfKu7PHygVV5Ok4_lSibCW4ATeFpBu
(about me, it solved the problem of unrecognized devices)
On your device, go into Settings -> About and find the Build Number and tap on it 7 times to enable developer settings. Press back and go into Developer Options and enable USB debugging.
Connect the phone to the usb port
Copy June 2018 OTA file to SD Card
You will need the platform-tools from the Android SDK on your computer ==> https://developer.android.com/studio/releases/platform-tools
Or use Minimal ADB ==> https://forum.xda-developers.com/showthread.php?t=2317790
On the computer, navigate to ADB’s folder and open a Command Prompt and type:
Code:
adb devices
check if the device is detected correctly
Code:
adb reboot recovery
If you see a “No Command” screen ==> Press and hold Power key and quickly press and release the Volume Up key
Select apply update from SD card and select the update file (June 2018 OTA)
When the update gives an error, reboot to bootloader by selecting the option from recovery mode
Code:
fastboot devices
check if the device is detected correctly
Now use the unlock key to unlock. Do normal unlock and also critical unlock.
Code:
fastboot flash unlock UnlockFile.bin
(UnlockFile.bin = name of the dedication key you purchased and it's easier to place it in the same folder as platform-tools)
Code:
fastboot oem unlock-go
fastboot flash unlock UnlockFile.bin
fastboot flashing unlock_critical
fastboot reboot
If it doesn't reboot, open NOST and flash the full firmware (nb0)
Warning: the battery must be sufficiently charged for NOST
Click to expand...
Click to collapse
sorry for taking so long in getting bk to u i decided to get rid of this device and got a pixel 3 xl thanks.

stupid Nokia, why bother rooting this with a pay service!
and a bunch of instruction, waste of time!
I own a xiaomi 9 se for unlocking BL just take a week, oneplus 6 just need a second!

I'm not saying anything about techmesto, but I do not know them. Man, do you know the damage someone can do with an IMEI and S/N? Damn Nokia.

arl0ng said:
Hello, for the key, I had to buy it on techmesto (thanks to him for the tutorial)
regarding instructions :
Grab the June 2018 OTA file from here => https://android.googleapis.com/pack.../2a84fb0cddebb6ed79e18735740c7386ebd4be1f.zip
Download the full firmware for Nokia 6 => https://drive.google.com/open?id=1twEoVIImRHeFdJ6OQSG4tfkEvtrY_0uJ
Download and install the NOST Tool => https://forum.xda-developers.com/no...t-improved-version-ost-la-6-0-4-v0-4-t3875574
Download and install OST Tool => https://drive.google.com/open?id=1-iwfKu7PHygVV5Ok4_lSibCW4ATeFpBu
(about me, it solved the problem of unrecognized devices)
On your device, go into Settings -> About and find the Build Number and tap on it 7 times to enable developer settings. Press back and go into Developer Options and enable USB debugging.
Connect the phone to the usb port
Copy June 2018 OTA file to SD Card
You will need the platform-tools from the Android SDK on your computer ==> https://developer.android.com/studio/releases/platform-tools
Or use Minimal ADB ==> https://forum.xda-developers.com/showthread.php?t=2317790
On the computer, navigate to ADB’s folder and open a Command Prompt and type:
Code:
adb devices
check if the device is detected correctly
Code:
adb reboot recovery
If you see a “No Command” screen ==> Press and hold Power key and quickly press and release the Volume Up key
Select apply update from SD card and select the update file (June 2018 OTA)
When the update gives an error, reboot to bootloader by selecting the option from recovery mode
Code:
fastboot devices
check if the device is detected correctly
Now use the unlock key to unlock. Do normal unlock and also critical unlock.
Code:
fastboot flash unlock UnlockFile.bin
(UnlockFile.bin = name of the dedication key you purchased and it's easier to place it in the same folder as platform-tools)
Code:
fastboot oem unlock-go
fastboot flash unlock UnlockFile.bin
fastboot flashing unlock_critical
fastboot reboot
If it doesn't reboot, open NOST and flash the full firmware (nb0)
Warning: the battery must be sufficiently charged for NOST
Click to expand...
Click to collapse
arl0ng said:
Hello, for the key, I had to buy it on techmesto (thanks to him for the tutorial)
regarding instructions :
Grab the June 2018 OTA file from here => https://android.googleapis.com/pack.../2a84fb0cddebb6ed79e18735740c7386ebd4be1f.zip
Download the full firmware for Nokia 6 => https://drive.google.com/open?id=1twEoVIImRHeFdJ6OQSG4tfkEvtrY_0uJ
Download and install the NOST Tool => https://forum.xda-developers.com/no...t-improved-version-ost-la-6-0-4-v0-4-t3875574
Download and install OST Tool => https://drive.google.com/open?id=1-iwfKu7PHygVV5Ok4_lSibCW4ATeFpBu
(about me, it solved the problem of unrecognized devices)
On your device, go into Settings -> About and find the Build Number and tap on it 7 times to enable developer settings. Press back and go into Developer Options and enable USB debugging.
Connect the phone to the usb port
Copy June 2018 OTA file to SD Card
You will need the platform-tools from the Android SDK on your computer ==> https://developer.android.com/studio/releases/platform-tools
Or use Minimal ADB ==> https://forum.xda-developers.com/showthread.php?t=2317790
On the computer, navigate to ADB’s folder and open a Command Prompt and type:
Code:
adb devices
check if the device is detected correctly
Code:
adb reboot recovery
If you see a “No Command” screen ==> Press and hold Power key and quickly press and release the Volume Up key
Select apply update from SD card and select the update file (June 2018 OTA)
When the update gives an error, reboot to bootloader by selecting the option from recovery mode
Code:
fastboot devices
check if the device is detected correctly
Now use the unlock key to unlock. Do normal unlock and also critical unlock.
Code:
fastboot flash unlock UnlockFile.bin
(UnlockFile.bin = name of the dedication key you purchased and it's easier to place it in the same folder as platform-tools)
Code:
fastboot oem unlock-go
fastboot flash unlock UnlockFile.bin
fastboot flashing unlock_critical
fastboot reboot
If it doesn't reboot, open NOST and flash the full firmware (nb0)
Warning: the battery must be sufficiently charged for NOST
Click to expand...
Click to collapse
can u tell, about the key sir?

arl0ng said:
Hello, for the key, I had to buy it on techmesto (thanks to him for the tutorial)
regarding instructions :
Grab the June 2018 OTA file from here => https://android.googleapis.com/pack.../2a84fb0cddebb6ed79e18735740c7386ebd4be1f.zip
Download the full firmware for Nokia 6 => https://drive.google.com/open?id=1twEoVIImRHeFdJ6OQSG4tfkEvtrY_0uJ
Download and install the NOST Tool => https://forum.xda-developers.com/no...t-improved-version-ost-la-6-0-4-v0-4-t3875574
Download and install OST Tool => https://drive.google.com/open?id=1-iwfKu7PHygVV5Ok4_lSibCW4ATeFpBu
(about me, it solved the problem of unrecognized devices)
On your device, go into Settings -> About and find the Build Number and tap on it 7 times to enable developer settings. Press back and go into Developer Options and enable USB debugging.
Connect the phone to the usb port
Copy June 2018 OTA file to SD Card
You will need the platform-tools from the Android SDK on your computer ==> https://developer.android.com/studio/releases/platform-tools
Or use Minimal ADB ==> https://forum.xda-developers.com/showthread.php?t=2317790
On the computer, navigate to ADB’s folder and open a Command Prompt and type:
Code:
adb devices
check if the device is detected correctly
Code:
adb reboot recovery
If you see a “No Command” screen ==> Press and hold Power key and quickly press and release the Volume Up key
Select apply update from SD card and select the update file (June 2018 OTA)
When the update gives an error, reboot to bootloader by selecting the option from recovery mode
Code:
fastboot devices
check if the device is detected correctly
Now use the unlock key to unlock. Do normal unlock and also critical unlock.
Code:
fastboot flash unlock UnlockFile.bin
(UnlockFile.bin = name of the dedication key you purchased and it's easier to place it in the same folder as platform-tools)
Code:
fastboot oem unlock-go
fastboot flash unlock UnlockFile.bin
fastboot flashing unlock_critical
fastboot reboot
If it doesn't reboot, open NOST and flash the full firmware (nb0)
Warning: the battery must be sufficiently charged for NOST
Click to expand...
Click to collapse
Thanks for the super indepth guide! I've been waiting for years now for HMD to release the bootloader unlock tool for the OG phones, but that's clearly never gonna happen. Techmesto charges 8 dollars for the key and the downgrade + unlock, but 5 dollars for just the key. So I think I'll follow your guide to downgrade and then purchase the key from them afterwards.