Hello.
I've a problem with Bluetooth call on my phone (stock rom) . All works great but since a couple of days I can't receive or make some calls with any Bluetooth device ( headset handfree, car audio etc). Media like music or icoyote (set in a2dp notification o media) works great.
I've reset all, car audio, phone. Nothing changed. I've installed spectrum mm rom, I've the same problem.
When I open Bluetooth device properties I can't activate the option for call and notification.
Do you have any idea for solve this problem?
Hello and up! Anyone have an idea to solve my problem? I've reset the phone 2 time and it works great for 2 week and now it don't work. I can't made a call with the Bluetooth
bluetooth doesnt open?can u send-receive files?
Hello. Bluetooth works. I can play audio like mp3 on hands-free and car audio. I can make phone calls on car audio but sounds of call don't go on car audio. On the phone I can't check made call on Bluetooth
I've tested the last spetrum's modem. All works great after each reboot but just one time.
When I enable the bt for the first time after rebooting it connect and call phone option was activated. When I enable it the second time it connect but call phone options was disable and if I tried to check it I can't.
the only issue that I have from the bigining..is that many times although b.t connects,it doesnt transfer sound to my plantronics M55 b.t headset.then I just turn off-on my headset,it reconnects automatically and sound is being transmited normally..
I solved the same problem with this thread
https://forums.lenovo.com/t5/Moto-X...less-bluetooth-headset-for-phone/td-p/3652038
Related
I have now tried 3 different bluetooth headsets with my AT&T Tilt with Stock Rom. First was my BlueAnt V12 I used great with my RAZR then I bought a Motorola S705 now I have Sony HBH-DS980.
With the BlueAnt V12 the audio was low and tinny and couldn't hear the caller
The Motorola S705 sounded good minor choppiness but the callers couldn't hear me worth a damn. Both of these devices paired great and kept connection, only the Motorola would loose connection if I got a system alarm or if I was streaming music. For just handset operation it worked great. With the Sony it seems to be a crap shoot when they are going to work. I installed JetWare to enable Caller ID Name and Ringtone through headset and when I pair them the first time they work great all day long. However if I turn bluetooth off on the phone and then back on I have issues with disconnecting and sound not going through headset for calls.
So I installed the new Official AT&T Rom from HTC's Site the other day hoping the bluetooth improvements they made would help. I decided to try JetWare again just to see if it worked, again I started having problems again. So I hard reset and didn't install the JetWare Extensions. For the first day everything worked great. Next day I fired it up it's up to it's old tricks of disconnecting after a call.
Anyone else having these issues? My state is going to be bluetooth only while driving in about 4 months so I really need bluetooth to work.
Can you charge the sony ds980 via usb?
No it has a real strange plug for charging
Hi, I have the Sony Ds980. I've experienced similar problems in the past.
check your Bluetooth settings on the phone: communication manager --> Settings --> bluetooth. Select your device (ds-980) but don't double click on it. and then check its mode: in that window, ensure that you have checkmarks in both options (i.e, Turn on bluetooth & make sure this device is visible to other devices). Sometimes, when you restart your bluetooth headset, the second option is left unchecked, thus causing disconnections between it and the device.
another option is to trigger the headset button. sometimes, when a call comes in, I would have to do this once or twice before it connects.
I think it is a bug.
i have the Jetware extension and MSVoice, and they help with the caller ID.
HTH,
rgds, Manny
I'm trying to decided between the DS980 and the Moto S9.
I'm so tired of wasting my money on crap.
Thanks I'll have a look at those settings, I just wish JetWare uninstalled nicely
I have been running it lately without JetWare and the only issue I am having this way is the wireless stereo portion disconnects after each Incoming call it does not do this if I place a call.
With JetWare I can sometimes keep it connected no matter what the issue is it connects but when I place a test call it rings on the headset but when I answer the call it isn't comming in on the headset it is still on the phone although the call button works and ringing on the headset works. It got to be a pain to have to place a few test calls to make sure the headset was working.
dalavar said:
Thanks I'll have a look at those settings, I just wish JetWare uninstalled nicely
I have been running it lately without JetWare and the only issue I am having this way is the wireless stereo portion disconnects after each Incoming call it does not do this if I place a call.
With JetWare I can sometimes keep it connected no matter what the issue is it connects but when I place a test call it rings on the headset but when I answer the call it isn't comming in on the headset it is still on the phone although the call button works and ringing on the headset works. It got to be a pain to have to place a few test calls to make sure the headset was working.
Click to expand...
Click to collapse
Well, that does it for me. The DS980 is officially off my list.
Hello everyone, I run into a really weird problem on my Note 4 when receiving voice calls while using a bluetooth headset.
Summary:
If BT headset is not already connected before initiating or receiving a voice call, you have to press bluetooth button during the call to direct sound to phone and then back to the BT in order to get the mic on the headset to work.
More Details :
1. Incoming Voice call
2. While phone is ringing i turn on the bluetooth headset.
3. I answer the call(Either from phone or the headset)
4. I can hear the other party, but he doesn't hear me.
5. The bluetooth headset mic is not working, neither the phone's mic.
6. If i press the bluetooth icon on the phone(while in a voice call) to direct audio to phone, everything works fine.
7. If i press again to direct audio back to bluetooth headset, everything works fine.
8. If the headset is already connected to the phone before i receive the voice call everything works fine.
9. If i make a voice call (maybe cause headset is already connected?) everything works fine.
10. Problem doesn't occur if it's a VOIP call through skype viber etc.
10. Using plantronics Marque M165 & M55, I have unpaired both repaired, cleared bluetooth cache etc problem still there. Lollipop 5.0.1.
For me it's a big issue since if i have the phone in my bag/pocket i have to take it out in order to be able to use the headset, which kind of defeats the purpose.
Anyone facing this ? Any suggestions?
Sorry for the long post & thanks in advance !
Anyone?
Anyone with similar problems ? Any ideas or suggestions ???
Yes, I have a similar problem, but with my car's bluetooth (the only hands free I use). This problem started after I upgraded to Lollipop, and it worked fine in KitKat.
With te device connected to the car's bluetooth, I have to make the call in the phone's Speaker mode until the other party answers. Only then I can switch to bluetooth.
If I make the call in bluetooth mode, I won't hear the ringing through the car's speakers and even after the other party answers, we cannot communicate.
This is a serious bug. It is my 4th Samsung Galaxy phone, and the only one that doesn't work properly. My previous S4 worked perfectly and I regret profoundly having bought the Note 4.
Ironically i don't face the problem you have. Mine works fine with my car's BT but i suppose this happens because in my case the car's BT is already connected to the phone.
I suppose you have tried to repair the bluetooth/ cleared BT cache etc right ?
I've just tried the phone with a Samsung bluetooth and problem solved !....So it doesn't play well with the plantronic's BT , warning for potential buyers !
Hi everyone,
I recently got my self a OP5 (coming from a Meizu PRO 5). The phone is great but I facing an annoying issue with the Bluetooth.
I have a Sony SBH20 Bluetooth headset. And everything works perfectly fine EXCEPT when someone calls me.
Every single time when I answer the call via my sbh20 I can ear and talk through it but a few seconds later the sound switch back to the phone earpiece.
But on the phone, the logo on the call app is set to the Bluetooth device.
And when I manually switch it to the phone earpiece and then going back to the Bluetooth device, the sbh20 works again. But only for couple of secs and then switch back to the phone with still the Bluetooth headset selected.
My phone is completely stock with noting fancy on it.
The phone is up to date according the present date (10/08/17).
PS : I set my phone from scratch. No migration or something like that.
Thanks you for your comments.
XsniferX said:
Hi everyone,
I recently got my self a OP5 (coming from a Meizu PRO 5). The phone is great but I facing an annoying issue with the Bluetooth.
I have a Sony SBH20 Bluetooth headset. And everything works perfectly fine EXCEPT when someone calls me.
Every single time when I answer the call via my sbh20 I can ear and talk through it but a few seconds later the sound switch back to the phone earpiece.
But on the phone, the logo on the call app is set to the Bluetooth device.
And when I manually switch it to the phone earpiece and then going back to the Bluetooth device, the sbh20 works again. But only for couple of secs and then switch back to the phone with still the Bluetooth headset selected.
My phone is completely stock with noting fancy on it.
The phone is up to date according the present date (10/08/17).
PS : I set my phone from scratch. No migration or something like that.
Thanks you for your comments.
Click to expand...
Click to collapse
Anyone please?
I use a Bose Bluetooth head phones no issues while calling.
Try some other headphones!!
I had a similar issue with my OP5 connection with my car's Bluetooth. It always fails to discover car's Bluetooth after connecting to the car, and stopping and starting the car. I did some research and most of the suggestions stated the issue was with cache. I reset the cache and did not have the problem. worth a try.
Hi hello guys how are you. So i have th essential phone and the gear s3 frontier. When the watch is paired to the phone whenever i receive or make a phone call even using the phones dialer. I would get no sound at all. The other person cant hear me either. I noticed that even if i pick up a call with the phone it would automatically switch to the watch. I think it might be a glitch thinking is more like a radio Bluetooth. So even if i switch to the phone or speaker. No audio at all. If i turn off the Bluetooth everything is back to normal. Any suggestions. I would like to keep on using my watch. Sometimes im not near my phone and would like to talk through the watch. If i go into the Bluetooth settings i can toggle the option for voice calls. I would get the notification when receiving a call but on the watch i cant only decline now.
You have to go in BT settings and set the watch not to be used for phone audio
no audio when answering an incoming call, while paired with a smartwatch
hi,
I'm experiencing the same thing, but I would use another title for the bug (see above).
The answer in post #2 is helping me to get audio when answering a phone call, BUT I can't use my smartwatch (Gear S3) for making calls or answering calls anymore.
So when I disable the "phone audio" in the smartwatch Bluetooth connection profile, the phone sends the audio to the earpiece, as no audio Bluetooth device is connected --> audio is available when answering the call.
But as I want to use my smartwatch for making and answering calls, I'd like to get a solution for this.
Side note: there is no audio on both ends. I can't hear the other end and the other end can't hear me. And the "no audio" thing is only present for the first 10 seconds of a call. After that the audio starts to work on both ends via phone (when watch is connected as BT audio device).
BR
ice
Hi XDA
I'm using a K88H SmartWatch and a LG G3.
So I already installed the Mediatek App for notifications and a app called Sound about.
My problem is the following. Once I connected my phone the wanted behaviour is that when a call is incoming I want to see it on the SmartWatch but and can answer it there but the sound is coming from the phone. This already works so far. But once the call ended due to the second app my Bluetooth watch is disconnected as phone and only works as a media output device. So I have to reconnect the phone mode manually by pressing the phone button on the watch and reconnect it. But I would like to get it done automatically.
I set SoundAbout that for the phone call audio the phone app decides which sound device should be uses. And in the Bluetooth settings I put the phone call behaviour that the Bluetooth mono auto usage is deactivated. So once a call is made the phone switches from Bluetooth to normal phone as sound output.
So my question is how do I get my phone to use the Bluetooth device as phone again once the call has ended.
Or easier that the phone uses the earpiece for sound and doesnt disconnect the Bluetooth device.
Thanks in advance
Edit: I also tried Bluetooth auto connect app. It automatically disables Bluetooth when calling but only turns on Bluetooth automatically again once I open the app again. Maybe there is a setting that I haven't found that switches Bluetooth back on once the call ended.