Related
I have been trawling the internet for literally hours.
This is my final hope before I get really desperate with this device.
I bought a Samsung Galaxy Edge+ online as a demo unit so I could use it as a glorified tablet,
since it was a demo unit it had demo software which I tried to remove using the 5444 password
trick on the retail software to no avail. So I decided to root the phone using Odin and the
SM-G928 F/I/C/K/S software as i couldn't find the particular software for this phone anywhere.
This worked but every time I booted the phone it would give me the 'KERNEL IS NOT SEANDROID ENFORCING'
on the top left of the device which I promptly ignored and continued to use the device, I downloaded
root check which said my device was rooted and then I downloaded system app uninstaller to try remove all the trial
software, which unfortunately didn't work. I then attempted a hard reset, which also didn't work and just
rebooted the device, finally i decided to download Flashify and TWRP recovery to try and delete the trial software
from there. At this point I was just messing around with the phone when I noticed a thread that said i needed
titanium backup to fully delete the software, so i rebooted the phone and it has been stuck on the bootup screen
ever since, I have tried several methods to get it to work including re-flashing the software onto it,
(the SM-G928F one I mean) but i simply cannot find the correct one for my device.
Any help would be greatly appreciated :good::good::good::good:
The device is running 5.1.1
I am not sure of the kernel or anything like that as I am quite noobish.
re: phone issues
MeMyPhoneAndI said:
I have been trawling the internet for literally hours.
This is my final hope before I get really desperate with this device.
I bought a Samsung Galaxy Edge+ online as a demo unit so I could use it as a glorified tablet,
since it was a demo unit it had demo software which I tried to remove using the 5444 password
trick on the retail software to no avail. So I decided to root the phone using Odin and the
SM-G928 F/I/C/K/S software as i couldn't find the particular software for this phone anywhere.
This worked but every time I booted the phone it would give me the 'KERNEL IS NOT SEANDROID ENFORCING'
on the top left of the device which I promptly ignored and continued to use the device, I downloaded
root check which said my device was rooted and then I downloaded system app uninstaller to try remove all the trial
software, which unfortunately didn't work. I then attempted a hard reset, which also didn't work and just
rebooted the device, finally i decided to download Flashify and TWRP recovery to try and delete the trial software
from there. At this point I was just messing around with the phone when I noticed a thread that said i needed
titanium backup to fully delete the software, so i rebooted the phone and it has been stuck on the bootup screen
ever since, I have tried several methods to get it to work including re-flashing the software onto it,
(the SM-G928F one I mean) but i simply cannot find the correct one for my device.
Any help would be greatly appreciated :good::good::good::good:
The device is running 5.1.1
I am not sure of the kernel or anything like that as I am quite noobish.
Click to expand...
Click to collapse
First thing to do is to get into STOCK recovery and do a "Factory Data Reset"
or you can boot the phone up and go into "Settings>Backup and Reset" and
select "Factory data reset".
After doing that odin flash the proper S6 Edge+ Lollipop 5.1.1 or the new Marshmallow 6.0 firmware.
You can see the exact model of your G928 phone by going into settings and scroll down to "about"
there you will find the specific model of your phone.
Be sure to ONLY odin flash the correct firmware for your phone's model.
Once you do all the above you will no longer see:
'KERNEL IS NOT SEANDROID ENFORCING'
The only reason you see that is because the phone is rooted.
After odin flashing the proper firmware your phone will no longer be rooted
unless you root the phone again.
Good luck,
Have a great day!
Misterjunky said:
First thing to do is to get into STOCK recovery and do a "Factory Data Reset"
or you can boot the phone up and go into "Settings>Backup and Reset" and
select "Factory data reset".
After doing that odin flash the proper S6 Edge+ Lollipop 5.1.1 or the new Marshmallow 6.0 firmware.
You can see the exact model of your G928 phone by going into settings and scroll down to "about"
there you will find the specific model of your phone.
Be sure to ONLY odin flash the correct firmware for your phone's model.
Once you do all the above you will no longer see:
'KERNEL IS NOT SEANDROID ENFORCING'
The only reason you see that is because the phone is rooted.
After odin flashing the proper firmware your phone will no longer be rooted
unless you root the phone again.
Good luck,
Have a great day!
Click to expand...
Click to collapse
I can't boot the phone up, if I could I would, I can't find the software for this particular model, which is aforementioned SM-G928X,
If you could help me with that, I would appreciate it. The phone is stuck on the Saumsung boot up, it doesn't actually boot up into
the lock screen so I can't do anything with it, if you could help me with link to the SM-G928X firmware that I could use in ODIN
that would be greatly appreciated cause the phone is a paper weight at this point.
I had a moment of madness and decided to do what you said anyway, and I can't factory reset the phone from the recovery menu as it says
its due to security policies or something of that nature, which again I mentioned in the initial thread.
Also to clarify, I can't flash my own firmware because I can't find the firmware anywhere on the internet.
re: firmwares
MeMyPhoneAndI said:
I can't boot the phone up, if I could I would, I can't find the software for this particular model, which is aforementioned SM-G928X,
If you could help me with that, I would appreciate it. The phone is stuck on the Saumsung boot up, it doesn't actually boot up into
the lock screen so I can't do anything with it, if you could help me with link to the SM-G928X firmware that I could use in ODIN
that would be greatly appreciated cause the phone is a paper weight at this point.
I had a moment of madness and decided to do what you said anyway, and I can't factory reset the phone from the recovery menu as it says
its due to security policies or something of that nature, which again I mentioned in the initial thread.
Also to clarify, I can't flash my own firmware because I can't find the firmware anywhere on the internet.
Click to expand...
Click to collapse
I have done a bit of research on your G928X device and I think you are in luck.
Check out this link carefully http://pdadb.net/index.php?m=specs&id=8759&c=samsung_sm-g928x_galaxy_s6_edgeplus_lte-a_samsung_zen
and you will see that the firmware in your phone is identical to many other G928 firmwares as you will see in that link.
Odin flashing any of the ZEN firmwares in that link cannot brick your phone, the worse thing that can happen is that it will not
work. (just like it's not working for you right now).
I would go a head and odin flash the S6 Edge+ G928T firmware which is also the ZEN baseband firmware, there are many S6 Edge+ phones
using the exact same firmware. All Samsung S6 Edge+ firmwares contain the modem but not all of them will be compatible with your
carrier but at least you will be able to boot your phone normally without getting stuck on boot screen or bootlooping to start with.
You can get the G928T firmware from http://sammobile.com OR
https://www.androidfilehost.com/?fid=24499762636004597 (fast download)
Good luck,
Have a great day!
Here is the issue. A friend of mine had gone a bought a Galaxy Sky SM-S320VL from TracPhone. And had been using the phone without any problems until a couple of weeks ago. Then he decided to do a Factory Reset. Instead of doing the software reset, from with in Settings, he went and did a HARD Reset without unlocking the google account. And guess what, he can't remember the account information for that phone. And came to me to reset the phone. (As I had to deal with this problem in the past with other people and their phones.)
I have downloaded the only stock rom I can find for this phone and flashed it with Odin3. But for some reason the flashing of the rom is never done. By this I mean, the phone downloads the rom as Odin sends it. Odin reports a Success with the flashing. But, when the phone reboots. The system has not been reset and FRP is still active.
I have flashed only the AP, and the phone reboots directly into setup and shows a message about an unauthorized Factory Reset.
I have flash all 4 files in the ROM set (BL, AP, CP, and CSC). and Odin states the flash was a success. The phone reboots, goes to recovery and states Starting System Update. Goes so far into the update, then stops and shows Erasing. After a short time of showing Erasing it reboots to setup. Where again the phone shows the message about authorized Factory Reset.
I have used Odin3 v3.9.0, v3.11.1, v3.11.2, v3.12.5. And I have updated to the latest USB drivers from Samsung.
So my question is this. Has anyone had come across this behavior before? And how can I get past this?
The phones particulars:
Name: Samsung Galaxy Sky
Model #: SM-S320VL(GP)
OS v: 6.0.1
Firmware #: S320VLUDU2APJ3
Model #, as reported by Downloader: SM-S320VL
Note: As a strange side effect of when I flash all 4 rom files. For some reason once the phone has failed the system update, erased and has reboot. I have complete access to the phones User data area from within my computer. But, I am unable to access the phone with adb.
Hey folks,
I'm having the exact same issue as the OP. Odin does a successful install on the phone but I get the unauthorized reset message and then Wifi does not work when prompted on the next screen.
Is there a tracfone version of the rom or a fix that anyone here knows of? Thanks!
@drasnah
I have yet to get any kind of reply from anyone on this. Either now one knows, and is not stating so, or doesn't care.
I have seen the wi- fi fix in another thread.
Modify /system/build.prop:
ro.securestorage.support=true to false
Hope that helps!
20eyes said:
I have seen the wi- fi fix in another thread.
Modify /system/build.prop:
ro.securestorage.support=true to false
Hope that helps!
Click to expand...
Click to collapse
First this is not a wi-fi problem it is a re-flashing of the rom problem.
Second, I do not have access, root or otherwise, to any of the system files on the phone.
Third, with the first two in mind this possible solution is of no help.
Fourth, Re-read my original post. I have given complete detailed information as to what I have access to and what I have done.
Can someone send me a download think for this phone i downloaded one but it won't flash it keeps failing
This device has been locked down by Tradphone and Samsung. It gives errors flashing even the correct stock firmware. It's a piece of garbage. NEVER buy anything from Tracphone. Garbage company. You'll never fix this issue. Only pushed updates will flash via software from sammy and tracphone that is built into the rom..
Curtis1973 said:
This device has been locked down by Tradphone and Samsung. It gives errors flashing even the correct stock firmware. It's a piece of garbage. NEVER buy anything from Tracphone. Garbage company. You'll never fix this issue. Only pushed updates will flash via software from sammy and tracphone that is built into the rom..
Click to expand...
Click to collapse
Not sure if that's correct? It depends on the firmware and odin version being used.
---------- Post added at 10:00 PM ---------- Previous post was at 09:58 PM ----------
Nate1k904 said:
Can someone send me a download think for this phone i downloaded one but it won't flash it keeps failing
Click to expand...
Click to collapse
Post more details on the error, screenshots, firmware and odin version used.
Need to know if works. Or if needing to settle for a different route.
The_WABBIT said:
Here is the issue. A friend of mine had gone a bought a Galaxy Sky SM-S320VL from TracPhone. And had been using the phone without any problems until a couple of weeks ago. Then he decided to do a Factory Reset. Instead of doing the software reset, from with in Settings, he went and did a HARD Reset without unlocking the google account. And guess what, he can't remember the account information for that phone. And came to me to reset the phone. (As I had to deal with this problem in the past with other people and their phones.)
I have downloaded the only stock rom I can find for this phone and flashed it with Odin3. But for some reason the flashing of the rom is never done. By this I mean, the phone downloads the rom as Odin sends it. Odin reports a Success with the flashing. But, when the phone reboots. The system has not been reset and FRP is still active.
I have flashed only the AP, and the phone reboots directly into setup and shows a message about an unauthorized Factory Reset.
I have flash all 4 files in the ROM set (BL, AP, CP, and CSC). and Odin states the flash was a success. The phone reboots, goes to recovery and states Starting System Update. Goes so far into the update, then stops and shows Erasing. After a short time of showing Erasing it reboots to setup. Where again the phone shows the message about authorized Factory Reset.
I have used Odin3 v3.9.0, v3.11.1, v3.11.2, v3.12.5. And I have updated to the latest USB drivers from Samsung.
So my question is this. Has anyone had come across this behavior before? And how can I get past this?
The phones particulars:
Name: Samsung Galaxy Sky
Model #: SM-S320VL(GP)
OS v: 6.0.1
Firmware #: S320VLUDU2APJ3
Model #, as reported by Downloader: SM-S320VL
Note: As a strange side effect of when I flash all 4 rom files. For some reason once the phone has failed the system update, erased and has reboot. I have complete access to the phones User data area from within my computer. But, I am unable to access the phone with adb.
Click to expand...
Click to collapse
J3 sm s320vl... tracfone root availability? Just bought phone hopefully got a good one to root? Or maybe someone knows who maybe be able to... please help
No updates? Interested, I have the same phone.
There is no solution for this phone. It will forever be a Trac-phone.
Yes, it nice to imagine what could had been. If there was a fix for the locked bootloader. Its encrypted, and is highly unlikely to be broken by anyone.
Do not flash the boot.image that some people have suggested
Although that method works on some devices such as the AT&T Samsung Galaxy S5. In this case flashing the boot.image from an unlocked device does nothing but places the phone into an even more precarious situation, that makes it unusable even as a Trac phone.
While its true that this very low budget phone could had been decent with a custom Rom ,
You will not be able to get it working.
I have one that belonged to my daughter a couple of years ago and I managed to get it boot into the system again.
Its only function is as a calculator, or preschool game, the cellular reception and Wifi connections are highly unstable and will not stay connected.
Now it serves as my nieces play toy. I would donate to some poor person at the Salvation Army it if it was useable.
By the way, for anyone reading this.
If you have an old phone that is useable. You could dramatically help a Homeless people, by gifting them with a phone especially, if it has some minutes on it.
This gift will help them schedule job interviews, doctors appointments , etc and you will feel good knowing that you helped someone in need.
I have done this before, and will be dropping off a Blu phone, and Kindle Tablet this week.
tsongming said:
There is no solution for this phone. It will forever be a Trac-phone..
Click to expand...
Click to collapse
It is possible to gain root on this device.
ashyx said:
It is possible to gain root on this device.
Click to expand...
Click to collapse
I have permissible SE Status but can not achieve root on this device. Also, I have not found that anyone has had success rooting this exact model.
To be clear my device is the 2016 TracFone Samsung Galaxy J3 Sky model : SM-S320VL
Build S320VUDU1APG2
Hardware Version S320 VL04
I have found reports of people with S320VLUDU2API3 stating that the were able to achieve root and then assumed that it must also be possible with S320VUDU1APG2.
I am usually the guy that can figure these things out, very often before others. But I have had no success gaining root on this device using published methods. Also, I have not seen one example of someone with this identical device who gained root.
You are apparently the Wizard of these Samsung phones, so if you know of a definite way to root it, please point me towards the solution. I would really appreciate it.
I would love to root this phone, get it working again, and gift it to lady who was beaten by her husband and she is now living in a homeless shelter with her two children. She could use a phone to help with her job search. She would appreciate it.
At the moment this phone can will not keep a signal and I can't attempt the build prop solution without root.
Thank you.
tsongming said:
I have permissible SE Status but can not achieve root on this device. Also, I have not found that anyone has had success rooting this exact model.
To be clear my device is the 2016 TracFone Samsung Galaxy J3 Sky model : SM-S320VL
Build S320VUDU1APG2
Hardware Version S320 VL04
I have found reports of people with S320VLUDU2API3 stating that the were able to achieve root and then assumed that it must also be possible with S320VUDU1APG2.
I am usually the guy that can figure these things out, very often before others. But I have had no success gaining root on this device using published methods. Also, I have not seen one example of someone with this identical device who gained root.
You are apparently the Wizard of these Samsung phones, so if you know of a definite way to root it, please point me towards the solution. I would really appreciate it.
I would love to root this phone, get it working again, and gift it to lady who was beaten by her husband and she is now living in a homeless shelter with her two children. She could use a phone to help with her job search. She would appreciate it.
At the moment this phone can will not keep a signal and I can't attempt the build prop solution without root.
Thank you.
Click to expand...
Click to collapse
See the thread below. Root was gained, albeit temporary. However I believe this is due to kernel panics which may be solved by a few build.prop edits. We had to do the same on the J327T1.
https://forum.xda-developers.com/galaxy-j3-2016/help/samsung-galaxy-j3-sm-s320vl-rooted-t3561762
Also if you firmware S320VUDU1APG2 then why not just update it to the firmware that has been reported to work?
I have found one these phones left on a table of a food truck area, screen was cracked - the device was only getting the android guy with triangle on it, I done some research and found the stock rom and flashed it with odin; as some have mentioned in comments above I also experienced wifi issue, so I thought I had installed incorrect rom - downloaded a different one this was a combination file that was the factory repair rom used for testing the device, but wifi worked - it wasn't a fully working telephone it didnt have the app store, well it really didnt have any apps, but I found I could copy over apk files from my PC to the device and then install them, so the phones not completely useless or junk --- it could be used for something. I myself am using that device as a security camera using IP CAM app works great. I was actually using this device for quiet some time as my roku tv remote, because my actual roku remote grown legs and walked off... i havent tried this, but I am sure you could install a launcher apk such as "apex launcher"
well i wasted enough of your time today...
Ok, so this is my wife's phone. After the last OTA update to QE1, she noticed that the WIFI would not turn on. I kinda ignored her for a couple of weeks until she really made a fuss of it. When I finally got around to it I also noticed that "CUSTOM" was present in the phone information area as well as upon bootup. I've searched XDA as well as other sites and tried everything I could think of but nothing has helped. I cannot mess with any WIFI settings because it will not turn on at all so I can't even access the menu. Neither Sprint nor Samsung will touch the phone because they claim I rooted it. I didn't. I have factory reset it numerous times with no luck. I have ODIN'd the software for a full reset and used all older software versions even. Following Sprint's own software updates, no luck. I have used the Samsung SmartSwitch program on the computer to also do a full reset to factory multiple times with no luck. The Samsung rep at the local Best Buy even tried it. The only thing that a full reset helps with is getting rid of the "CUSTOM" notification until you reboot the phone. It doesn't fix WIFI.
Has anyone had experience with this problem? I am getting ready to root it, but I'm not sure if that will even help. Additionally, the phone currently does not have Sprint service, I had to activate her old phone... So, I don't have access to the internet with the phone unless I reactivate it on an account... I looked at a root option, but it requires wifi...
I'm open to suggestions. Please help..
Ok, so no one has any input on how to fix my problem. Is it not possible with the locked bootloader?
dochummer said:
Ok, so no one has any input on how to fix my problem. What about hard bricking the phone? I've tried ODIN with different model firmware and I can't get a hard brick. Is it not possible with the locked bootloader?
Click to expand...
Click to collapse
After running odin with stock firmware, go into recovery and hard reset the device again . As far as Hard Bricking on Purpose, that would be fraud, something not allowed to be discussed here. Mods please lock this thread.
Thanks for the reply. Sorry about breaking the forum rules, I went ahead and edited my original posting. I've already tried odin with stock firmware and hard resetting the device numerous times with no luck... I'd like to be able to dig deeper into the phone but I'm guessing that won't be possible with the locked boot loader?
Hi peoples,
I sold my S6 Edge Plus (SM-G928i) phone on eBay. The buyer claimed it was faulty and sent it back.
When I got it back, he had factory reset it, but he had left his Google account on the phone, as well as turned on FRP lock.
I tried to flash it back to the stock Rom, I get this error:
An error has occurred while updating the device software use the emergency recovery in Smart Switch.
I then run Smart Switch and it asks me for a recovery code.
Is there a way I can fix this, or has the eBayer bricked my phone?
Thanks heaps
Dazza
I would assume there is a block on software altering while FRP lock is tripped. Maybe you could flash TWRP, wipe everything, and *maybe* that would work, but you would end up with tripped knox if it wasn't already tripped.
Odin
fonefreakz said:
Hi peoples,
I sold my S6 Edge Plus (SM-G928i) phone on eBay. The buyer claimed it was faulty and sent it back.
When I got it back, he had factory reset it, but he had left his Google account on the phone, as well as turned on FRP lock.
I tried to flash it back to the stock Rom, I get this error:
An error has occurred while updating the device software use the emergency recovery in Smart Switch.
I then run Smart Switch and it asks me for a recovery code.
Is there a way I can fix this, or has the eBayer bricked my phone?
Thanks heaps
Dazza
Click to expand...
Click to collapse
Odin should work with a firmware push
Hi All,
I'm really sorry, I'm completely new to all this so hope I'm posting in the right area and explain this issue correctly!
I purchased a dead SAMSUNG T580 Galaxy Tab off ebay and managed to repair the hardware fault which I was pleased about but then encountered the dreaded FRP lock so I still can't use the thing. It's running firmware T580XXS5CTK1 and I've no idea what to do with it now, it's not got the assist option when trying the add network trick, so then I thought I could perhaps use Odin with combination firmware but the only combination firmware I could find even remotely similar was T580XXU5ATD1 which I didn't really expect to work and I was right, the tab just got stuck in a loop and I ended up re-flashing with the T580XXS5CTK1 to get it back to starting correctly.
Does anyone have any suggestions how I can get rid of this lock please? I only bought the thing as an amusement thing during lockdown but it'd be nice to get it fully functional!
Kal-El-77 said:
Hi All,
I'm really sorry, I'm completely new to all this so hope I'm posting in the right area and explain this issue correctly!
I purchased a dead SAMSUNG T580 Galaxy Tab off ebay and managed to repair the hardware fault which I was pleased about but then encountered the dreaded FRP lock so I still can't use the thing. It's running firmware T580XXS5CTK1 and I've no idea what to do with it now, it's not got the assist option when trying the add network trick, so then I thought I could perhaps use Odin with combination firmware but the only combination firmware I could find even remotely similar was T580XXU5ATD1 which I didn't really expect to work and I was right, the tab just got stuck in a loop and I ended up re-flashing with the T580XXS5CTK1 to get it back to starting correctly.
Does anyone have any suggestions how I can get rid of this lock please? I only bought the thing as an amusement thing during lockdown but it'd be nice to get it fully functional!
Click to expand...
Click to collapse
Sorry to say, but FRP is there for a reason. Best to get another device which is unlocked
I got a similar problem. Stuck on 32% with "no command".
For usual, I frozen the emergency service, but I unfrozen all to update apps in samsungs store.
After a restart I got a frp lock, rom was a modified stock of T580XXS5CTK1 and twrp.
I was surprised that I can't solve it this time.
I know fully acc details and pin, but how to use it?
I bought another Tablet, but the A6 is a unique one, I would be very thankful for some help.
I don't know a tablet is solid, stable and easy to repair like A6, some games it still can handle.
Original packaging, invoice, all available, password and pin known, help me please.