Database Users

[i9505] Cannot enter Recovery after Format Data

My i9505 was running stock KitKat from Samsung and I tried to install CM13 ROM.
So I used Odin to root the phone and installed TWRP 2.8.6.0. After that I flashed the CM13 ROM and the Gapps Nano.
I got as far as rebooting into CM13. But then the "Google Play Store has stopped working" message keeps popping up starting from the initial setup phase. I ignored the message and went on to setup the wifi but couldn't progress any further. The wifi was detected and connected but then it was stuck on the Checking Connection/Software Update step.
I tried to reflash the rom and gapps again to no avail. The third time to Format Data from TWRP before reflashing - still didn't make a difference.
What's worst is now I cannot even get into TWRP! Whenever I press Vol Up + Power + Home, it will show the small 'entering recovery' message momentarily on the top left corner but then it phone simply restarted again.
I tried re-flashing TWRP using Odin, but still didn't work.
I'm stuck now, cannot get into the OS nor the recovery. Any suggestion as to what to do?
Thank you.

vizavalk said:
My i9505 was running stock KitKat from Samsung and I tried to install CM13 ROM.
So I used Odin to root the phone and installed TWRP 2.8.6.0. After that I flashed the CM13 ROM and the Gapps Nano.
I got as far as rebooting into CM13. But then the "Google Play Store has stopped working" message keeps popping up starting from the initial setup phase. I ignored the message and went on to setup the wifi but couldn't progress any further. The wifi was detected and connected but then it was stuck on the Checking Connection/Software Update step.
I tried to reflash the rom and gapps again to no avail. The third time to Format Data from TWRP before reflashing - still didn't make a difference.
What's worst is now I cannot even get into TWRP! Whenever I press Vol Up + Power + Home, it will show the small 'entering recovery' message momentarily on the top left corner but then it phone simply restarted again.
I tried re-flashing TWRP using Odin, but still didn't work.
I'm stuck now, cannot get into the OS nor the recovery. Any suggestion as to what to do?
Thank you.
Click to expand...
Click to collapse
Format Data from twrp sometime corrupts the file system and brick the phone. (It's happened to me once)
The best way is to flash official firmware via odin and start from there.

I see - I'll try re-flashing the official rom. Btw, would you recommend CWM recovery instead then? Honestly, I'm not very proficient with this whole thing. The reason why I formatted was because I still could see all of my old folders in the phone memory. So I thought Factory Reset didn't really clean up my old rom data.
What do I have to do if I want to start with a really clean slate with CM13 (after reflashing the official one first)?
Also, I still have the issue of CM13 setup being stuck at the Software Update step (right after Wifi setup). Any clue why that happened?
Thanks for taking the time to reply.

vizavalk said:
I see - I'll try re-flashing the official rom. Btw, would you recommend CWM recovery instead then? Honestly, I'm not very proficient with this whole thing. The reason why I formatted was because I still could see all of my old folders in the phone memory. So I thought Factory Reset didn't really clean up my old rom data.
What do I have to do if I want to start with a really clean slate with CM13 (after reflashing the official one first)?
Also, I still have the issue of CM13 setup being stuck at the Software Update step (right after Wifi setup). Any clue why that happened?
Thanks for taking the time to reply.
Click to expand...
Click to collapse
CWM is outdated. Your best bet is TWRP. Try version 3.0.0.
Factory reset doesn't wipe your internal memory, if that's what you mean, you will have to do it manually.
Also, I recommend wiping data, cache, dalvik and system partitions manually from the advanced wipe menu. Factory reset only wipes data and caches, not system.
Oh, and about that stuck at setup issue, just skip that step if possible, you can still change that crap later

If you are unable to set up the ROM, you could flash back to a completely stock ROM and start over.

OK, I'm back on stock Android now.
Before I try flashing CM13 again, I just need suggestions about these two issues I had from previous try:
Unfortunately, Google Play Store has stopped
I have searched for similar issues but can't quite pinpoint the cause. I used the correct GApps for my device and I also removed my SD card prior to installing.
Stuck on Check Connection/Software Update step
Last time I was stuck at this point and, responding to GDReaper, this step couldn't be skipped. The option was grayed out.

vizavalk said:
OK, I'm back on stock Android now.
Before I try flashing CM13 again, I just need suggestions about these two issues I had from previous try:
Unfortunately, Google Play Store has stopped
I have searched for similar issues but can't quite pinpoint the cause. I used the correct GApps for my device and I also removed my SD card prior to installing.
Stuck on Check Connection/Software Update step
Last time I was stuck at this point and, responding to GDReaper, this step couldn't be skipped. The option was grayed out.
Click to expand...
Click to collapse
The sd card has nothing to do with it.
Sometimes gapps don't work on certain roms.
Just try another package.
If you use A-Gapps, the whole first time setup step will be skipped altogether. So that means that you won't run into the risk of getting stuck at that step again.
Or, after flashing the rom, you could use the recovery file manager to delete the setupwizard.apk after you flashed gapps. That should also prevent the initial setup process from initializing at first boot.

vizavalk said:
OK, I'm back on stock Android now.
Before I try flashing CM13 again, I just need suggestions about these two issues I had from previous try:
Unfortunately, Google Play Store has stopped
I have searched for similar issues but can't quite pinpoint the cause. I used the correct GApps for my device and I also removed my SD card prior to installing.
Stuck on Check Connection/Software Update step
Last time I was stuck at this point and, responding to GDReaper, this step couldn't be skipped. The option was grayed out.
Click to expand...
Click to collapse
You probably used Opengapps. That also gives me a lot of errors.
Use Bankgs Gapps instead. They always work for me.
http://download.dirtyunicorns.com/files/gapps/banks_gapps/

GDReaper said:
The sd card has nothing to do with it.
Sometimes gapps don't work on certain roms.
Just try another package.
If you use A-Gapps, the whole first time setup step will be skipped altogether. So that means that you won't run into the risk of getting stuck at that step again.
Or, after flashing the rom, you could use the recovery file manager to delete the setupwizard.apk after you flashed gapps. That should also prevent the initial setup process from initializing at first boot.
Click to expand...
Click to collapse
I used Open GApps, as was recommended in the CM13 post. So are you saying that my two issues were caused solely by the GApps? Because I thought me being stuck at Software Update was due to something else.
Lennyz1988 said:
You probably used Opengapps. That also gives me a lot of errors.
Use Bankgs Gapps instead. They always work for me.
http://download.dirtyunicorns.com/files/gapps/banks_gapps/
Click to expand...
Click to collapse
There are two files - one says Dynamic. But the file sizes are exactly the same. Is there any difference?

vizavalk said:
I used Open GApps, as was recommended in the CM13 post. So are you saying that my two issues were caused solely by the GApps? Because I thought me being stuck at Software Update was due to something else.
There are two files - one says Dynamic. But the file sizes are exactly the same. Is there any difference?
Click to expand...
Click to collapse
Not that I know. Just pick the one without Dynamic.

vizavalk said:
I used Open GApps, as was recommended in the CM13 post. So are you saying that my two issues were caused solely by the GApps? Because I thought me being stuck at Software Update was due to something else.
Click to expand...
Click to collapse
The initial setup process is related to gapps. And I don't recall there being any software update requests during the initial setup. It tells me to wait while it scans for network and WiFis, but I always skip those steps.
Open gapps sometimes work and sometimes they don't. It varies from day to day, since they are updated daily.
Just find a gapps package that works and stick to it until another version of android.

I just want to report back that my CM13 works perfectly with Banks GApps. Thanks to everyone who has helped!

[solved] Phone is acting weird ... random reboots shortly after boot

Hi there,
I started this topic because I am out of options and I don't know what to do at this point.
My Phone is a XT1562 DualSim.
I recently flashed http://forum.xda-developers.com/moto-x-play/development/rom-spetrum-mm-volte-t3462690 and I also installed "MODEM" (MPD24.107-70) from page 1, but not right away.
First I wiped everything expect "internal storage". The phone booted but it restarted during boot (which might be okay) but then it rebooted again during boot. The boot process finally finished and I got to the screen "Android is starting - Optimising app x of y." The phone rebooted even during that process and that is definitely not normal I think. So after a couple of reboots android did finally optimise all apps but the phone did still reboot withing the first 30 seconds after it was booted.
From here I did a lot of testing and doing. These are my findings:
- When I set phone to flight mode / airplane mode it does NOT reboot... Hurray!
- When I flash another ROM (Official CM 13, http://forum.xda-developers.com/mot...m-cyanogenmod-13-preview-moto-x-play-t3252255) the phone runs like a charm, NO reboots whatsoever.
- - But as soon as I flash gapps and the phone is booted, I get the reboots again (usually within the first 30 seconds).
- - Again setting the phone to flight mode prevents itself from rebooting.
- - Apparently it doesn't matter what version of gapps I flash. I even tested the light version (ARM, 6.0, Pico, from http://opengapps.org/). It still reboots. I also tried gapps mini and stock.
Oh and I don't think its MODEM (mentioned above) related, because I faced these problems already before I installed / updated the MODEM. Well I thought its MODEM related, that's why I went back to MODEM stock version MPD24.107-52 but that did't help either. I should mention that I am not sure if I had MPD24.107-52 installed originally but spetrum (the rom developer) pointed me to that version: http://forum.xda-developers.com/showpost.php?p=69129552
I also restored my working TWRP backup from an android I used for month and guess what, yep, reboots
brrrrr this is frustrating
I never experienced that before and frankly I am out of ideas.
Anything is welcome and appreciated
Thank you

If nothing helps reflashing the whole firmware is always an option

minimale_ldz said:
If nothing helps reflashing the whole firmware is always an option
Click to expand...
Click to collapse
Thanks I haven't done that.
To be clear, you mean firmware as in stock rom / factory image?

I always go back to flashing stock rom with rsdlite whenever things went wrong and I can't solve it by flashing small fixes.

rancor187 said:
Thanks I haven't done that.
To be clear, you mean firmware as in stock rom / factory image?
Click to expand...
Click to collapse
I mean full stock firmware you flash with fastboot or RSD. Roms are usually only system + kernel, so not very helpful in your case

Guys! Good news. I did go back to stock firmware and from there to official CM13. Of course I had to root and install TWRP again but it was worth it.
I lost a few days spending my time with it but I'm glad its all good now thanks to you.

LineageOS May 22 Build: After reboot, 10min usage then sudden bootloop

I have a problem with using LOS: I install the ROM and it boots properly, so I do initial setup (setting name, google account, etc). However, if I reboot the phone, it goes into a bootloop thing where it stays on the boot animation and doesn't show up in ADB. This seems to persist on other ROMs as well. Can anyone help me out? I'm pretty desperate for a solution. I can't provide a logcat, since I can't access adb, but I will say that this issue persists after wiping data, system, cache, and dalvik. I have only installed the rom and SlimGApps 7.1.2. I have not installed any other apps in the recovery or from the Play Store. If it helps, the problem originated when I flashed Quark Kernel. After that, if I reboot, voluntarily or not, I never get to the lock screen. On the very first reboot, It looks as if it might have finished, as I get a black screen, but it just returns to a boot animation and stays there. Finally I noticed that if I touch the fingerprint sensor during this infinite boot, I feel a vibration.
I tried installing Vegito Kernel, and it let me in to the home screen, but the screen went black 10min later and it began bootlooping. Finally, if I try to reinstall LineageOS, the bootlooping still continues. If I install a different ROM such as AOSPExtended or RR, boot into setup, then install lineage again, I can boot.

It seems like your device is actually ducked. Try flashing stock N. goodluck :good:

tywinlannister7 said:
It seems like your device is actually ducked. Try flashing stock N. goodluck :good:
Click to expand...
Click to collapse
I installed RevivorOS and everything works aside from some buggy GApps. Thanks

Covalex said:
I installed RevivorOS and everything works aside from some buggy GApps. Thanks
Click to expand...
Click to collapse
Update them from the PlayStore and everything will work great :good:

tywinlannister7 said:
Update them from the PlayStore and everything will work great :good:
Click to expand...
Click to collapse
That's actually my problem, some apps are refusing to install such as Chrome and the Google App.

can't update past LineageOS 14.1 20171013

Thanks to XDA, I've been running LineageOS 14.1 on my LEX727 for months now, updating to most nightly releases with no issues. However, when the phone rebooted after updating to the 10/20/17 nightly, it got stuck on the boot animation screen (green circle moving right to left on the arc) and would go no further. I rebooted into TWRP and flashed back to 10/13 which has been working fine. Same results after attempted updates to the 10/27 and 11/3 releases. I even tried a manual update from TWRP using USB OTG with the same result.
Any ideas of what's gone wrong here? Anything I can try? All I know to do at this point is wipe and install clean but I'd rather not if possible. Thanks!

fraxby79 said:
Thanks to XDA, I've been running LineageOS 14.1 on my LEX727 for months now, updating to most nightly releases with no issues. However, when the phone rebooted after updating to the 10/20/17 nightly, it got stuck on the boot animation screen (green circle moving right to left on the arc) and would go no further. I rebooted into TWRP and flashed back to 10/13 which has been working fine. Same results after attempted updates to the 10/27 and 11/3 releases. I even tried a manual update from TWRP using USB OTG with the same result.
Any ideas of what's gone wrong here? Anything I can try? All I know to do at this point is wipe and install clean but I'd rather not if possible. Thanks!
Click to expand...
Click to collapse
I'd say do a clean install. If i have any issues with a rom booting i'll factory reset and install again. If i still have issues i'll just use another rom.

fraxby79 said:
Thanks to XDA, I've been running LineageOS 14.1 on my LEX727 for months now, updating to most nightly releases with no issues. However, when the phone rebooted after updating to the 10/20/17 nightly, it got stuck on the boot animation screen (green circle moving right to left on the arc) and would go no further. I rebooted into TWRP and flashed back to 10/13 which has been working fine. Same results after attempted updates to the 10/27 and 11/3 releases. I even tried a manual update from TWRP using USB OTG with the same result.
Any ideas of what's gone wrong here? Anything I can try? All I know to do at this point is wipe and install clean but I'd rather not if possible. Thanks!
Click to expand...
Click to collapse
I am in the same situation. Have tried all combinations of wiping and resetting with all 3 of the latest nightlies and still cannot boot. I can successfully boot into a stock rom but, I'd rather not. I guess I will go back to the 10/13 nightly since it worked (mostly) before this debacle. Hopefully next week's update will solve this problem.

Thanks for your reply, islandlife98. I'm not super-confident at this ROM thing yet so backing up, wiping and reinstalling is something I'd undertake reluctantly. I was hoping this was a common situation with a simple fix that I just had been unable to find. Always prefer to actually solve a problem if possible rather than just wipe it out. (Although when it comes to tech, wiping it out is often the best or only solution. Almost always the quickest.)
JBealZy, thank you for letting me know you're in the same boat! After seeing no mention of this issue here, I assumed it was some weird glitch with my phone rather than a problem with the updates. If you've done a full wipe and re-install but still haven't been able to boot into any of the last three releases then I'm glad I hesitated. (That was a concern I'd had: that it might not work even after a clean install.) Think I'll stick with 10/13 for now and keep trying the new releases; easy enough to roll back if it fails now that I've figured it out.

Lmao same problem here with the 2017-11-11 and 2017-11-03 udpate. Not tested yet with 2017-10-27 or 2017-10-20 but that's my last choice because after 2017-10-13 update all links are removed. I do a clean install every time .. What other rom is better ?
Problem resolved .. i have wiped internal storage too and able to install the last version. I think i'm gonna use another ROM because i don't really want to reinstall all of my applications everytime i do an update. :/

Deediezi said:
Lmao same problem here with the 2017-11-11 and 2017-11-03 udpate. Not tested yet with 2017-10-27 or 2017-10-20 but that's my last choice because after 2017-10-13 update all links are removed. I do a clean install every time .. What other rom is better ?
Problem resolved .. i have wiped internal storage too and able to install the last version. I think i'm gonna use another ROM because i don't really want to reinstall all of my applications everytime i do an update. :/
Click to expand...
Click to collapse
I am using Paranoid ( latest version) and everything works flawlessly.
Sent from my LEX727 using XDA Labs

Deediezi said:
Lmao same problem here with the 2017-11-11 and 2017-11-03 udpate. Not tested yet with 2017-10-27 or 2017-10-20 but that's my last choice because after 2017-10-13 update all links are removed. I do a clean install every time .. What other rom is better ?
Problem resolved .. i have wiped internal storage too and able to install the last version. I think i'm gonna use another ROM because i don't really want to reinstall all of my applications everytime i do an update. :/
Click to expand...
Click to collapse
Another victim! So weird, I wonder what's going on there. None of the updates since my original post have worked so I've come to the conclusion that I'm going to have to do a clean install. Just need to find a time do it. Good to hear it worked for you.
LineageOS is the only ROM I've tried but since I have to wipe my phone anyway I may try some others. Paranoid Android looks interesting and Tsongming says it's working well.

fraxby79 said:
Another victim! So weird, I wonder what's going on there. None of the updates since my original post have worked so I've come to the conclusion that I'm going to have to do a clean install. Just need to find a time do it. Good to hear it worked for you.
LineageOS is the only ROM I've tried but since I have to wipe my phone anyway I may try some others. Paranoid Android looks interesting and Tsongming says it's working well.
Click to expand...
Click to collapse
Yea i'm downloading Paranoïd right now for testing it .. Don't want a broken operating system on my phone haha

If anyone's still interested, I first tried flashing Lineage after wiping all but internal storage and still couldn't get past the boot animation. Then did a full factory-reset wipe including the internal storage, re-flashed, and it finally booted. The first OTA update since then came through today and went off without a hitch so all seems well for now.
I did take a look at Paranoid before going back to Lineage. One big reason I use a custom ROM is to get security updates quickly and LOS reports the security patch level in the settings; I couldn't find this info in PA. Also, I use a pattern to unlock my phone and there didn't appear to be a way use a larger grid than the default 3x3. On the plus side (sort of), PA includes the LeEco remote control app, which seems to be the only way to use the IR hardware on this phone, but it asks for more permissions than I want to give (which, of course, is not PA's fault). So admittedly I didn't really give it a full and fair trial but those few little issues sent me back to the (usually) reliable familiarity of LOS.

I received a new LEX722 yesterday. The TWRP for zl1 is working fine, but I cannot get lineagos working.
I deleted:
- dalvik,
- system,
- cache
- data
- and also the internal storage
after rebooting into twrp I enabled usb debugguung and pushed the lineageos and gapps images via adb push to the phone.
I installed lineageos and gapps nano, but after booting to system, I get stuck in a black screen looping to a dark grey luminated display (no graphics at all).

Heistergand said:
I received a new LEX722 yesterday. The TWRP for zl1 is working fine, but I cannot get lineagos working.
I deleted:
- dalvik,
- system,
- cache
- data
- and also the internal storage
after rebooting into twrp I enabled usb debugguung and pushed the lineageos and gapps images via adb push to the phone.
I installed lineageos and gapps nano, but after booting to system, I get stuck in a black screen looping to a dark grey luminated display (no graphics at all).
Click to expand...
Click to collapse
Sorry, can't help you with that since I have a LEX727 which is apparently quite different from the LEX722. Official LineageOS is only supported on the LEX720 and LEX727: [ https://wiki.lineageos.org/devices/zl1 ]. The LEX722 (Elite) has it's own section here on the LeEco Pro 3 forum so check that out and see what they've come up with.

SM-P580 blackscreen problem

So tl;dr version - i was using my tablet, saw an update to magisk, installed it, now it boots to black screen while running sambones rom
[SM-P580] [BQK1] SaMBoNeS
TWRP 3.2.3.0 --> 3.3.1.0
longer story:
i was trying to get a game to run, it wasnt...and realized it has been a while for a restart, so i checked to see if anything needs to be updated and saw magisk needed an update. i didnt note what version it was before but it was a version or two earlier than what it was trying to install.
rebooted to blackscreen no samsung logo
have tried restarting a dozen times, booted to TWRP, tried to force normal system boot through the UI, nothing.
I tried installing a new kernal [SiriKernel], it made it to the samsung logo, waited 15 - 20 minutes and it never made it past. restored a backup using TWRP
updated TWRP to 3.3.1.0, still no luck.
i had this problem a long time ago, and cannot figure out how i fixed it....it may have fixed itself but it isnt this time. any advice would be appreciated. I am trying to avoid wiping and starting again if at all possible because the problem seems familiar. also trying to stick to a rom for use with adaptive storage. if i do have to wipe if that can be done on a newer stock OS that's fine as well but last time i messed with this tablet it wasnt