Hi there,
I started this topic because I am out of options and I don't know what to do at this point.
My Phone is a XT1562 DualSim.
I recently flashed http://forum.xda-developers.com/moto-x-play/development/rom-spetrum-mm-volte-t3462690 and I also installed "MODEM" (MPD24.107-70) from page 1, but not right away.
First I wiped everything expect "internal storage". The phone booted but it restarted during boot (which might be okay) but then it rebooted again during boot. The boot process finally finished and I got to the screen "Android is starting - Optimising app x of y." The phone rebooted even during that process and that is definitely not normal I think. So after a couple of reboots android did finally optimise all apps but the phone did still reboot withing the first 30 seconds after it was booted.
From here I did a lot of testing and doing. These are my findings:
- When I set phone to flight mode / airplane mode it does NOT reboot... Hurray!
- When I flash another ROM (Official CM 13, http://forum.xda-developers.com/mot...m-cyanogenmod-13-preview-moto-x-play-t3252255) the phone runs like a charm, NO reboots whatsoever.
- - But as soon as I flash gapps and the phone is booted, I get the reboots again (usually within the first 30 seconds).
- - Again setting the phone to flight mode prevents itself from rebooting.
- - Apparently it doesn't matter what version of gapps I flash. I even tested the light version (ARM, 6.0, Pico, from http://opengapps.org/). It still reboots. I also tried gapps mini and stock.
Oh and I don't think its MODEM (mentioned above) related, because I faced these problems already before I installed / updated the MODEM. Well I thought its MODEM related, that's why I went back to MODEM stock version MPD24.107-52 but that did't help either. I should mention that I am not sure if I had MPD24.107-52 installed originally but spetrum (the rom developer) pointed me to that version: http://forum.xda-developers.com/showpost.php?p=69129552
I also restored my working TWRP backup from an android I used for month and guess what, yep, reboots
brrrrr this is frustrating
I never experienced that before and frankly I am out of ideas.
Anything is welcome and appreciated
Thank you
If nothing helps reflashing the whole firmware is always an option
minimale_ldz said:
If nothing helps reflashing the whole firmware is always an option
Click to expand...
Click to collapse
Thanks I haven't done that.
To be clear, you mean firmware as in stock rom / factory image?
I always go back to flashing stock rom with rsdlite whenever things went wrong and I can't solve it by flashing small fixes.
rancor187 said:
Thanks I haven't done that.
To be clear, you mean firmware as in stock rom / factory image?
Click to expand...
Click to collapse
I mean full stock firmware you flash with fastboot or RSD. Roms are usually only system + kernel, so not very helpful in your case
Guys! Good news. I did go back to stock firmware and from there to official CM13. Of course I had to root and install TWRP again but it was worth it.
I lost a few days spending my time with it but I'm glad its all good now thanks to you.
Related
Hi all,
I recently installed the newest build of Slimbean. I am having a few issues: I am unable to play any media... Music, videos (youtube). My phone app does not work. I cannot receive nor send any calls. And my phone produces no sounds at all.
I tried installing build 7 to see if it was an issue with the build I was using... didn't help.
Internet and wifi work without any problems.
Galaxy S4 i337m
Baseband: I337MUMUAMDL
Version: Slim-4.2.2.build.7-OFFICIAL
Build #: slim_jfltecan-userdebug 4.2.2 JDQ39E eng.blk_jack.20130706.15730 test-keys
Any ideas?
Thanks in advance
Update: Any ROM I install... Phone and sounds do not work.
Talabis said:
Update: Any ROM I install... Phone and sounds do not work.
Click to expand...
Click to collapse
I'd Odin back to stock and see if you still have the issue. If you do it's a hardware issue.
jd1639 said:
I'd Odin back to stock and see if you still have the issue. If you do it's a hardware issue.
Click to expand...
Click to collapse
I did just that... But it's a bit of a story.
I had just fixed another problem I was having yesterday. Was getting stuck at the S4 splash screen right after powering on the phone. The problem was caused by TWRP 2.6 and formatting /data partition. Long story short, I installed CWM and used it to do a full wipe/format of partitions and then was able to install ROMs, restore backups without issue.
So today, since everything was working, I decided to flash a new custom ROM (which I installed) and the MG1 radio. Wasn't having any luck with the radio. Finally, I was able to flash a radio via mobile odin, but then I soft bricked my phone. Got stuck at the S4 splash screen (same issue I had yesterday, but this time, a different cause). So was troubleshooting it all day. Tried to go back to stock, no luck. Tried to restore the stock backup I had, no luck. Only thing I could do was install custom ROMs at this point to get into my phone (i.e. Slimbean, FoxHound, etc...). But, at this point, although I could boot into Android, I had no sound at all and couldn't play video. So after hours of trial and error, I installed CWM again (replacing TWRP 2.5.0.2), did a full wipe/format and tried to install a stock ROM. No luck. Still was hanging at the S4 splash screen. Then I tried to install this ROM again which I had luck with in the past; |ROM| |★VLUAMG1★| |CANADIAN||i337M||STOCK||ROOTED||July.26.13|. But his instructions said to install a wifi fix or fear soft bricking my phone. So I installed the wifi fix, but selected the wrong file (I know, stupid. Done a lot of stupid **** in the past couple days with this phone). Now, after the phone rebooted, I would see the S4 splash screen for a split second, and it would auto load into download (odin) mode. Couldn't get into recovery at all. So then I decided to flash one of the stock ROMs I tried earlier that didn't work, but this time, SUCCESS!!!!! Phone was booting and all sounds worked. I could make/receive phone calls as well... Everything seems to be working fine now. I find it funny that flashing a wifi fix that I shouldn't have seems to have fixed my issue in a sense. Since it allowed me to successfully flash a stock ROM. So I am making a backup of the stock ROM and will decide what I'm going to do from here.
Holy goalie!!! It's been a very vexing couple of days.
Nice that you got it all worked out, I've found out that if your "status" is custom, it will sometimes give you problems when flashing a "stock" rom via odin.
So what I always do when reverting back to the stock rom, I use triangle away to clear the flash count and make my phone back to "Official". If you want the steps to do this, let me know, it's not hard, but there are crucial steps to get this right!
JP
Hi Everyone, i am getting random reboots and freezes on all rom and kernel combinations, sometimes it will happen 20 times a day, some times only a couple.
Anyone know what the problem may be?
Damaged bootloader or something?
natious said:
Hi Everyone, i am getting random reboots and freezes on all rom and kernel combinations, sometimes it will happen 20 times a day, some times only a couple.
Anyone know what the problem may be?
Damaged bootloader or something?
Click to expand...
Click to collapse
What note variant?
Which bootloader are you using?(Had that issue)
KitKat from the leak ages ago, and n9005.
natious said:
Hi Everyone, i am getting random reboots and freezes on all rom and kernel combinations, sometimes it will happen 20 times a day, some times only a couple.
Anyone know what the problem may be?
Damaged bootloader or something?
Click to expand...
Click to collapse
OMG same here i get random reboots. though it hardly ever happens to me, nothing is affected and everything is fine, but its just weird. ive not tried the SystemServer Crash Fix in Wanam, though this may help. :good: when it comes to freezes it happens all the time to every device so no real explanation- at least not from me. though greenifying apps and de bloating and etc would help if this is consistant. - i my slef havent de bloated anything and only greenify apps. you could also try a factory reset.
I have tried wanam crash fix still the same problem, i guess its more than rom selection.
What do i need to flash to set everythinf back to factory factory, reflash bootloader the works.
natious said:
What do i need to flash to set everythinf back to factory factory, reflash bootloader the works.
Click to expand...
Click to collapse
I'd format everything in TWRP, system data cache internal, the lot.
Then power off the phone and it will warn you that there is no OS installed. Then boot to download mode with the button combo.. then flash the latest stock rom via odin
I use v3.09
celderic said:
I'd format everything in TWRP, system data cache internal, the lot.
Then power off the phone and it will warn you that there is no OS installed. Then boot to download mode with the button combo.. then flash the latest stock rom via odin
I use v3.09
Click to expand...
Click to collapse
Hey mate, I have a HK note, can't seem to find latest 4.4.2/4 firmware, so I tried N9005XXUFNF4_N9005OXAFNF4_BTU but failed on ext4 system etc... so i just flashed the latest N4 bootloader, flash twrp, a rom, same freezing issue.
Anyone else?
natious said:
Hey mate, I have a HK note, can't seem to find latest 4.4.2/4 firmware, so I tried N9005XXUFNF4_N9005OXAFNF4_BTU but failed on ext4 system etc... so i just flashed the latest N4 bootloader, flash twrp, a rom, same freezing issue.
Click to expand...
Click to collapse
That's your problem then. You flashed incompatible software on a HK Note. HK notes are slightly different to the normal note due to software. Find the latest HK software and have a nose around the HK guides and read how to fix, it's a common problem (or it was once at least) and can be fixed, so don't panic too much
Sent from my Spectrum ZX +2
Ok cool thanks, i checked samfirmware and nudda?
I have previously softbricked my note when kk first came out and had to flash the chinese Rom / sweet from combo to bring it back, are you saying to flash that chinese rom again?
Im not sure what started the trouble as i was running xnote for a while perfectly.
I found this firmware on samsung updates "N9005ZHUENH4" flashed it, seemed to be ok for the last couple days, today I rooted the phone and boom, back to freezing and restarting.
I re-flashed BL, Modem + CSC from the HK recovery rom, but it wouldn't let me flash AP :s
I just flashed g00h s5 rom, I can't get past the inital setup steps :/
What do I need to re-flash the phone to totally factory, seems there is still something screwing it all up :/
herrrooo???
Have flashed multiple times, cannot shake this problem.
My i9505 was running stock KitKat from Samsung and I tried to install CM13 ROM.
So I used Odin to root the phone and installed TWRP 2.8.6.0. After that I flashed the CM13 ROM and the Gapps Nano.
I got as far as rebooting into CM13. But then the "Google Play Store has stopped working" message keeps popping up starting from the initial setup phase. I ignored the message and went on to setup the wifi but couldn't progress any further. The wifi was detected and connected but then it was stuck on the Checking Connection/Software Update step.
I tried to reflash the rom and gapps again to no avail. The third time to Format Data from TWRP before reflashing - still didn't make a difference.
What's worst is now I cannot even get into TWRP! Whenever I press Vol Up + Power + Home, it will show the small 'entering recovery' message momentarily on the top left corner but then it phone simply restarted again.
I tried re-flashing TWRP using Odin, but still didn't work.
I'm stuck now, cannot get into the OS nor the recovery. Any suggestion as to what to do?
Thank you.
vizavalk said:
My i9505 was running stock KitKat from Samsung and I tried to install CM13 ROM.
So I used Odin to root the phone and installed TWRP 2.8.6.0. After that I flashed the CM13 ROM and the Gapps Nano.
I got as far as rebooting into CM13. But then the "Google Play Store has stopped working" message keeps popping up starting from the initial setup phase. I ignored the message and went on to setup the wifi but couldn't progress any further. The wifi was detected and connected but then it was stuck on the Checking Connection/Software Update step.
I tried to reflash the rom and gapps again to no avail. The third time to Format Data from TWRP before reflashing - still didn't make a difference.
What's worst is now I cannot even get into TWRP! Whenever I press Vol Up + Power + Home, it will show the small 'entering recovery' message momentarily on the top left corner but then it phone simply restarted again.
I tried re-flashing TWRP using Odin, but still didn't work.
I'm stuck now, cannot get into the OS nor the recovery. Any suggestion as to what to do?
Thank you.
Click to expand...
Click to collapse
Format Data from twrp sometime corrupts the file system and brick the phone. (It's happened to me once)
The best way is to flash official firmware via odin and start from there.
I see - I'll try re-flashing the official rom. Btw, would you recommend CWM recovery instead then? Honestly, I'm not very proficient with this whole thing. The reason why I formatted was because I still could see all of my old folders in the phone memory. So I thought Factory Reset didn't really clean up my old rom data.
What do I have to do if I want to start with a really clean slate with CM13 (after reflashing the official one first)?
Also, I still have the issue of CM13 setup being stuck at the Software Update step (right after Wifi setup). Any clue why that happened?
Thanks for taking the time to reply.
vizavalk said:
I see - I'll try re-flashing the official rom. Btw, would you recommend CWM recovery instead then? Honestly, I'm not very proficient with this whole thing. The reason why I formatted was because I still could see all of my old folders in the phone memory. So I thought Factory Reset didn't really clean up my old rom data.
What do I have to do if I want to start with a really clean slate with CM13 (after reflashing the official one first)?
Also, I still have the issue of CM13 setup being stuck at the Software Update step (right after Wifi setup). Any clue why that happened?
Thanks for taking the time to reply.
Click to expand...
Click to collapse
CWM is outdated. Your best bet is TWRP. Try version 3.0.0.
Factory reset doesn't wipe your internal memory, if that's what you mean, you will have to do it manually.
Also, I recommend wiping data, cache, dalvik and system partitions manually from the advanced wipe menu. Factory reset only wipes data and caches, not system.
Oh, and about that stuck at setup issue, just skip that step if possible, you can still change that crap later
If you are unable to set up the ROM, you could flash back to a completely stock ROM and start over.
OK, I'm back on stock Android now.
Before I try flashing CM13 again, I just need suggestions about these two issues I had from previous try:
Unfortunately, Google Play Store has stopped
I have searched for similar issues but can't quite pinpoint the cause. I used the correct GApps for my device and I also removed my SD card prior to installing.
Stuck on Check Connection/Software Update step
Last time I was stuck at this point and, responding to GDReaper, this step couldn't be skipped. The option was grayed out.
vizavalk said:
OK, I'm back on stock Android now.
Before I try flashing CM13 again, I just need suggestions about these two issues I had from previous try:
Unfortunately, Google Play Store has stopped
I have searched for similar issues but can't quite pinpoint the cause. I used the correct GApps for my device and I also removed my SD card prior to installing.
Stuck on Check Connection/Software Update step
Last time I was stuck at this point and, responding to GDReaper, this step couldn't be skipped. The option was grayed out.
Click to expand...
Click to collapse
The sd card has nothing to do with it.
Sometimes gapps don't work on certain roms.
Just try another package.
If you use A-Gapps, the whole first time setup step will be skipped altogether. So that means that you won't run into the risk of getting stuck at that step again.
Or, after flashing the rom, you could use the recovery file manager to delete the setupwizard.apk after you flashed gapps. That should also prevent the initial setup process from initializing at first boot.
vizavalk said:
OK, I'm back on stock Android now.
Before I try flashing CM13 again, I just need suggestions about these two issues I had from previous try:
Unfortunately, Google Play Store has stopped
I have searched for similar issues but can't quite pinpoint the cause. I used the correct GApps for my device and I also removed my SD card prior to installing.
Stuck on Check Connection/Software Update step
Last time I was stuck at this point and, responding to GDReaper, this step couldn't be skipped. The option was grayed out.
Click to expand...
Click to collapse
You probably used Opengapps. That also gives me a lot of errors.
Use Bankgs Gapps instead. They always work for me.
http://download.dirtyunicorns.com/files/gapps/banks_gapps/
GDReaper said:
The sd card has nothing to do with it.
Sometimes gapps don't work on certain roms.
Just try another package.
If you use A-Gapps, the whole first time setup step will be skipped altogether. So that means that you won't run into the risk of getting stuck at that step again.
Or, after flashing the rom, you could use the recovery file manager to delete the setupwizard.apk after you flashed gapps. That should also prevent the initial setup process from initializing at first boot.
Click to expand...
Click to collapse
I used Open GApps, as was recommended in the CM13 post. So are you saying that my two issues were caused solely by the GApps? Because I thought me being stuck at Software Update was due to something else.
Lennyz1988 said:
You probably used Opengapps. That also gives me a lot of errors.
Use Bankgs Gapps instead. They always work for me.
http://download.dirtyunicorns.com/files/gapps/banks_gapps/
Click to expand...
Click to collapse
There are two files - one says Dynamic. But the file sizes are exactly the same. Is there any difference?
vizavalk said:
I used Open GApps, as was recommended in the CM13 post. So are you saying that my two issues were caused solely by the GApps? Because I thought me being stuck at Software Update was due to something else.
There are two files - one says Dynamic. But the file sizes are exactly the same. Is there any difference?
Click to expand...
Click to collapse
Not that I know. Just pick the one without Dynamic.
vizavalk said:
I used Open GApps, as was recommended in the CM13 post. So are you saying that my two issues were caused solely by the GApps? Because I thought me being stuck at Software Update was due to something else.
Click to expand...
Click to collapse
The initial setup process is related to gapps. And I don't recall there being any software update requests during the initial setup. It tells me to wait while it scans for network and WiFis, but I always skip those steps.
Open gapps sometimes work and sometimes they don't. It varies from day to day, since they are updated daily.
Just find a gapps package that works and stick to it until another version of android.
I just want to report back that my CM13 works perfectly with Banks GApps. Thanks to everyone who has helped!
Ok, I think I'm in a deeper trouble than usual.
I've made a nandroid backup like usual and flashed the latest Dirty Unicorns ROM (http://forum.xda-developers.com/nex...-dirty-unicorns-v10-0-official-6-0-1-t3326798). It didn't work as well as I had hoped - was getting force-closes on practically everything. So I wanted to restore the backup. It restored, but didn't load. Odd, so I thought let's restart the phone. So I did, but the phone just kept sitting on the DU logo and not load at all. Ok, so let's clear both Dalvik and Cache. Still doesn't boot, just sits on the logo. Ok, let's factory-reset the phone, re-download, re-install the ROM, clear everything and try again - still the same, never boots. Ok, super weird by now, never happened to me before. Already took out the trusty old Nexus 5 as the backup, as things are getting more complicated.
So I tried flashing two other ROMs (CM13 and Exodus), but the same thing happens - it just sits on the respective ROM's logo. Can anyone tell me what's happening? I'm including a pic of my bootloader. Looking at the BL and Baseband values, they looks different - are they supposed to be the same?
Might be worth going back to the latest stock build to get all your firmware in order then flash a different rom afterwards.
Ok, don't know why or how it happened, but my TWRP version was still on 2.8.x.x, even though I'm sure I flashed the newest one. I flashed the 3.0.2.0 again, but the situation is still the same.
brichardson1991 said:
Might be worth going back to the latest stock build to get all your firmware in order then flash a different rom afterwards.
Click to expand...
Click to collapse
From here? http://forum.xda-developers.com/nexus-6p/development/rom-nexus6p-stock-roms-t3234067
From here sorry: https://developers.google.com/android/nexus/images#angler
if you get stuck follow Heisenberg's guide step 10 :
10. How To Flash The Factory Images (And Return To Stock)
http://forum.xda-developers.com/nexus-6p/general/guides-how-to-guides-beginners-t3206928
Yep, all good now. Followed all the steps, loaded stock images, flashed custom recovery, followed by the ROM, all good now. Thanks a bunch!
Was too quick to report success - now my SIM doesn't work. It populates the APNs, says LTE from the quick slide menu, but stays on no signal in the status bar, plus errors out when refreshing web pages, etc.
I've tried flashing different (including the latest) vendor images as well as different radios.
EDIT: never mind; the freaking Mobile Data was turned off (why the **** does it happen?). Turned it back on; all good now.
I received an update push from Motorolla that installed Nougat. After that, my phone would crash every 3-10 minutes. I did all the troubleshooting I could find online. I contacted support and they wanted me to spend $150 to get it "refurbished." Of course, it sure seems like a software problem, so that wouldn't help me anyways...
I turned to custom. After rooting, installing SuperSU and TWRP, I couldn't get several versions of AICP or Lineage to ever boot (stuck on loading screens). I also tried all the advice from this thread.
I went back and installed the stock Rom using f2fs , and the phone would get to the "hello moto" part of the boot up, then crash and reboot. I tried again using EXT4, and it worked, but just like before I ever begun, my phone was crashing every 3-10 minutes. However, the first crash wasn't until after I made a phone call, and my phone had been crash free for about 20 minutes before that call.
I'm a I.T. guy, but I'm not a "phone" guy. But it seems to me that there must be some other software that was modified during the update that is causing the problems that isn't part of ROMs. Something in the Kernal, or a driver folder or something?
Also, is there a way to get crash reports? So maybe if I at least go back to the default ROM and wait for it to crash, I have some info to work with?
Any help is greatly appreciated, thanks!
Flash full stock 6.0x for your model/region.
Important:
Without bootloader, gpt. Don't try locking BL.
Links you can find in my signature.
Try normal boot and after success any custom.
You cannot allow any ota update after it.
Some customs are only for Nougat modem/radio - don't flash it. @Kaivian
Ok, I got most of that, except I don't know what gpt refers to and am not getting any hits on search.
My signature - flashing stock - without bootloader & gpt.
So, I installed a 6.0 stock ROM and got tons of errors. I tried a 2nd time, still got tons of errors. Needless to say, stock 6.0 didn't boot. I decided, "The heck with it" and tried installing Lineage 7.1 again... and it worked! It finally booted up entirely. However, now I get a "Sim card missing" notification. Can I just reinstall part of something... like the modem? so I can keep this "working" lineage boot? Or am I starting over yet again?
Repeat
from
fastboot flash modem ...
to
...fsg.
dzidexx said:
Repeat
from
fastboot flash modem ...
to
...fsg.
Click to expand...
Click to collapse
This caused it to not boot.
I went back to 6.0 and turned off auto-updates. I'll try again sometime when I have time. I did like the custom rom a lot, just couldn't use it as a phone xD