Galaxy J3 Custom rom ? or port ? - Samsung Galaxy J3 (2016) Questions & Answers

Hello guys,
I got this device for about a week now and searched everywhere but there are no costum roms for this device and that causes me to return the device back and buy another device...
does anyone have successfully ported a rom ?

Kcetin20 said:
Hello guys,
I got this device for about a week now and searched everywhere but there are no costum roms for this device and that causes me to return the device back and buy another device...
does anyone have successfully ported a rom ?
Click to expand...
Click to collapse
does anyone have successfully ported a rom ?
Bootloop ;-;

https://forum.xda-developers.com/an...overy-teamwin-recovery-project-3-0-2-t3356616
Following the guide, flashing TWRP and installing the supersu caused my phone to go into a bootloop which I managed to remedy by going into recovery and installing the j3 lite ROM found on page 100 of the thread.
I would think to avoid bootloop, avoid installing the supersu provided in the guide. Flash TWRP, pull battery, boot to recovery, install custom ROM, wipe catch.

Kcetin20 said:
Hello guys,
I got this device for about a week now and searched everywhere but there are no costum roms for this device and that causes me to return the device back and buy another device...
does anyone have successfully ported a rom ?
Click to expand...
Click to collapse
KaioProHawk said:
does anyone have successfully ported a rom ?
Bootloop ;-;
Click to expand...
Click to collapse
Keszm0 said:
https://forum.xda-developers.com/an...overy-teamwin-recovery-project-3-0-2-t3356616
Following the guide, flashing TWRP and installing the supersu caused my phone to go into a bootloop which I managed to remedy by going into recovery and installing the j3 lite ROM found on page 100 of the thread.
I would think to avoid bootloop, avoid installing the supersu provided in the guide. Flash TWRP, pull battery, boot to recovery, install custom ROM, wipe catch.
Click to expand...
Click to collapse
Just find a ROM from a phone which has same specs as your phone and Pm me
I have already ported many ROMs for lenovo A6000

The Hard Gamer said:
Just find a ROM from a phone which has same specs as your phone and Pm me
I have already ported many ROMs for lenovo A6000
Click to expand...
Click to collapse
Galaxy Core Prime Same Specs
---------- Post added at 10:43 AM ---------- Previous post was at 10:41 AM ----------
Keszm0 said:
https://forum.xda-developers.com/an...overy-teamwin-recovery-project-3-0-2-t3356616
Following the guide, flashing TWRP and installing the supersu caused my phone to go into a bootloop which I managed to remedy by going into recovery and installing the j3 lite ROM found on page 100 of the thread.
I would think to avoid bootloop, avoid installing the supersu provided in the guide. Flash TWRP, pull battery, boot to recovery, install custom ROM, wipe catch.
Click to expand...
Click to collapse
I am uploading a stock ROM with only 480mb: v wait

I own this device , i have it rooted and TWRP.
People don't know the power of this device and it's chipset. Mine's J320m (brazil) 1.5 RAM but with 8gb internal memory.
TouchWiz UI sucks so much , i've had to install more than 20 xposed modules to make it go cleaner to look and use
also installed Pixl Launcher, HEBF Optimizer , Greenify , L Speed , Wanam Xposed , Xinternal
We need a custom rom , even CM13 or even CM12 for god's sake
Samsung blocks everything , so i think we need a new firmware at first.

lypolise said:
I own this device , i have it rooted and TWRP.
People don't know the power of this device and it's chipset. Mine's J320m (brazil) 1.5 RAM but with 8gb internal memory.
TouchWiz UI sucks so much , i've had to install more than 20 xposed modules to make it go cleaner to look and use
also installed Pixl Launcher, HEBF Optimizer , Greenify , L Speed , Wanam Xposed , Xinternal
We need a custom rom , even CM13 or even CM12 for god's sake
Samsung blocks everything , so i think we need a new firmware at first.
Click to expand...
Click to collapse
;-;
---------- Post added at 07:48 PM ---------- Previous post was at 07:47 PM ----------
lypolise said:
I own this device , i have it rooted and TWRP.
People don't know the power of this device and it's chipset. Mine's J320m (brazil) 1.5 RAM but with 8gb internal memory.
TouchWiz UI sucks so much , i've had to install more than 20 xposed modules to make it go cleaner to look and use
also installed Pixl Launcher, HEBF Optimizer , Greenify , L Speed , Wanam Xposed , Xinternal
We need a custom rom , even CM13 or even CM12 for god's sake
Samsung blocks everything , so i think we need a new firmware at first.
Click to expand...
Click to collapse
https://forum.xda-developers.com/android/development/rom-flasheable-stock-5-1-1-j3-j320m-t3545402 Lets Try?

Something for SM-J320F (Duos) in preparation?
After I made a backup with TWRP, I tryed to install the custom rom proposed in this tread:
Kezm0 said:
https://forum.xda-developers.com/and...3-0-2-t3356616
Following the guide, flashing TWRP and installing the supersu caused my phone to go into a bootloop which I managed to remedy by going into recovery and installing the j3 lite ROM found on page 100 of the thread.
I would think to avoid bootloop, avoid installing the supersu provided in the guide. Flash TWRP, pull battery, boot to recovery, install custom ROM, wipe catch.
Click to expand...
Click to collapse
But finally at reboot received the message:
kernel ist not seandroid enforcing.
It was not a problem to reinstall my backup with TWRP.
Surely I could try the otherone what was made for SM-J320M, but for this evening it wars enought stress. I hope also that there ist somebody who is so kind to work on a custom rom for J320F. It is very popular in Europe.

FranziskaH said:
After I made a backup with TWRP, I tryed to install the custom rom proposed in this tread:
But finally at reboot received the message:
kernel ist not seandroid enforcing.
It was not a problem to reinstall my backup with TWRP.
Surely I could try the otherone what was made for SM-J320M, but for this evening it wars enought stress. I hope also that there ist somebody who is so kind to work on a custom rom for J320F. It is very popular in Europe.
Click to expand...
Click to collapse
the big problem is the kernel , each variation needs a different kernel
what we really need is a pure and stock cyanogen version , with a ****ing clean 6.0 android , so we could use SD as internal memory

So... No j320f custom rom?...

Kcetin20 said:
Hello guys,
I got this device for about a week now and searched everywhere but there are no costum roms for this device and that causes me to return the device back and buy another device...
does anyone have successfully ported a rom ?
Click to expand...
Click to collapse
I am working on a unofficial build of of lineage OS for this device. You can check it out here! https://forum.xda-developers.com/general/general/lineage-os-samsung-galaxy-j3-t3553175

MrViking said:
I am working on a unofficial build of of lineage OS for this device. You can check it out here! https://forum.xda-developers.com/general/general/lineage-os-samsung-galaxy-j3-t3553175
Click to expand...
Click to collapse
Keep up the good work.

We could try porting from j210f same chipset and same specs

LineageOS for SM-j320f (Duos)
It would be great if it worked! I am available as a Betatester.

Keszm0 said:
https://forum.xda-developers.com/an...overy-teamwin-recovery-project-3-0-2-t3356616
Following the guide, flashing TWRP and installing the supersu caused my phone to go into a bootloop which I managed to remedy by going into recovery and installing the j3 lite ROM found on page 100 of the thread.
I would think to avoid bootloop, avoid installing the supersu provided in the guide. Flash TWRP, pull battery, boot to recovery, install custom ROM, wipe catch.
Click to expand...
Click to collapse
The BootLoop is caused by installing TWRP's SuperSu. Make sure you put your own SuperSu file on the android device.

you do have brazalian version thats the qualcomm processor but we are here getting issues with spreadtrum processor (J320F)

Kcetin20 said:
Hello guys,
I got this device for about a week now and searched everywhere but there are no costum roms for this device and that causes me to return the device back and buy another device...
does anyone have successfully ported a rom ?
Click to expand...
Click to collapse
Resurrection remix unofficial works really well!! It's marshmallow. Stable. Fast. Beautiful! I put on arise sound system! It's a killer!!!
Search for resurrection remix J3 its here on XDA. Forgot link. But its stable and great!
---------- Post added at 09:29 AM ---------- Previous post was at 09:27 AM ----------
Kcetin20 said:
Hello guys,
I got this device for about a week now and searched everywhere but there are no costum roms for this device and that causes me to return the device back and buy another device...
does anyone have successfully ported a rom ?
Click to expand...
Click to collapse
Here is the link. Flash in twrp
https://forum.xda-developers.com/ga...ent/rom-resurrection-remix-mm-v5-7-4-t3635573

Related

Galaxy S4 CM 12??

Guys i heard official CM 12 for Galax s4 i9505 released, i wanna install it, the problem is im a completely noob for install custom OS, never done it, im afraid i might brick the phone, can you guy guide me to do this please, current stock version 4.4.2 is very laggy :S
Thanks
Firstly, you have to be rooted.
I used this guide to root my s4. Installation instructions on second post.
Warning: Make sure you have the right model. Do not use CF-Auto-Root if you have an AT&T or VZW branded s4.
After rooting you will need a custom recovery.
There are several custom recoveries. The most popular being ClockworkMod Recovery (CWM) or Team Win Recovery Project (TWRP).
You can use ROM manager from the play store to install a custom recovery.
Or go here and use that guide.
After rooting and installing a custom recovery you can flash a custom rom. What you need to do when flashing a custom rom depends on the rom itself. See the rom installation instructions for that.
It's not hard if you follow the guides carefully. Or you can as a friend (who is more experienced at this) to help you
GDReaper said:
Firstly, you have to be rooted.
I used this guide to root my s4.
After rooting you will need a custom recovery.
There are several custom recoveries. The most popular being ClockworkMod Recovery (CWM) or Team Win Recovery Project (TWRP).
You can use ROM manager from the play store to install a custom recovery.
Or go here and use that guide.
After rooting and installing a custom recovery you can flash a custom rom. What you need to do when flashing a custom rom depends on the rom itself. See the rom installation instructions for that.
It's not hard if you follow the guides carefully. Or you can as a friend (who is more experienced at this) to help you
Click to expand...
Click to collapse
Thanks mate, i heard that the CM 12 for s4 is not even beta, i will wait for the stale version. :angel:
Demitha said:
Thanks mate, i heard that the CM 12 for s4 is not even beta, i will wait for the stale version. :angel:
Click to expand...
Click to collapse
You could flash the Google Play Edition ROM found here. I use it myself and it's very stable and haven't encountered any problems so far.
Edit: Only downside is that you can't move apps to sd card. It's not supported yet.
GDReaper said:
You could flash the Google Play Edition ROM found here. I use it myself and it's very stable and haven't encountered any problems so far.
Edit: Only downside is that you can't move apps to sd card. It's not supported yet.
Click to expand...
Click to collapse
that sucks :. im a heavy app user ,anyways did your phone lagg on stock android? mine is very laggy.. its on 4.4.2
Not able to move apps to sd card is only a problem when you have the 16GB version. But I heard there is some workaround for this.
In my opinion stock rom was pretty fluid. Didn't have any stuttering. Only lag I ever experience was when changing music tracks and the home button lag. But I have the international (unbranded) version of the S4. Which means no carrier bloatware to suck up the power and performance of the phone.
The gpe rom does seem faster and smoother compared to stock firmware.

HELP regarding Upgrade to MM STOCK ROM OR CM 13.0 !!!

Hi guys, its been a few days since I joined here. [Read : I am a noob/newbie in Android related things, and I desperately need help.]
In July (maybe, I forgot), I rooted my ZE550KL, using exactly this method from the website of www-asus-zenfone-com. :cyclops:
Now that, my android seems aged, I wanna shift/upgrade to Marshmallow/Nougat, be it Stock or Custom ROM.
Few days earlier, I unlocked my Bootloader using the Unofficial Bootloader Unlocking Method, as found on this Forum.
I also installed TWRP Recovery, and I tried to flash CM-14.1 [7.1] Nougat-Nightly through TWRP, but, unfortunately, resulted in Status 7 Error. I tried to solve the problem by removing "asserts" section in Update-Binary text file, in the build. But, again, I seemingly worsened the problem; as I got Status 6 error thereby. So, I did factory reset, and I still retain root.
Now, today as I am going through the Official thread of CM 14.1 Nougat, I saw numerous users reporting Bugs of connection issues (something like Wifi to Mobile Data switch problem), which I would like to OBVIOUSLY AVOID, as I want a stable, bug-less build. So, I am thinking to go with the last snapshot build of CM 13.0 Marshmallow.
Here comes the my question : " SHOULD I FLASH CM 13.0 MM -- OR -- STOCK ROM OF MM -- OR -- RESURRECTION REMIX MM ROM?? "
In any of the case, please guide me through the process of doing so.
And, if I have to flash CM 13.0 MM, what would I do if I encounter Status Error 7 again ? :crying:
first you have to upgrade it to marshmallow using stock rom. Then you can flash cm13 or cm14.1
Devc100 said:
first you have to upgrade it to marshmallow using stock rom. Then you can flash cm13 or cm14.1
Click to expand...
Click to collapse
Please, like I said, guide me through how to do it. Thanks in advance, in case you help. :good:
Ph4nToM_Z3rO said:
Hi guys, its been a few days since I joined here. [Read : I am a noob/newbie in Android related things, and I desperately need help.]
In July (maybe, I forgot), I rooted my ZE550KL, using exactly this method from the website of www-asus-zenfone-com. :cyclops:
Now that, my android seems aged, I wanna shift/upgrade to Marshmallow/Nougat, be it Stock or Custom ROM.
Few days earlier, I unlocked my Bootloader using the Unofficial Bootloader Unlocking Method, as found on this Forum.
I also installed TWRP Recovery, and I tried to flash CM-14.1 [7.1] Nougat-Nightly through TWRP, but, unfortunately, resulted in Status 7 Error. I tried to solve the problem by removing "asserts" section in Update-Binary text file, in the build. But, again, I seemingly worsened the problem; as I got Status 6 error thereby. So, I did factory reset, and I still retain root.
Now, today as I am going through the Official thread of CM 14.1 Nougat, I saw numerous users reporting Bugs of connection issues (something like Wifi to Mobile Data switch problem), which I would like to OBVIOUSLY AVOID, as I want a stable, bug-less build. So, I am thinking to go with the last snapshot build of CM 13.0 Marshmallow.
Here comes the my question : " SHOULD I FLASH CM 13.0 MM -- OR -- STOCK ROM OF MM -- OR -- RESURRECTION REMIX MM ROM?? "
In any of the case, please guide me through the process of doing so.
And, if I have to flash CM 13.0 MM, what would I do if I encounter Status Error 7 again ? :crying:
Click to expand...
Click to collapse
While flashing CM13 if that error 7 includes "asus.verify trustzone failed..." Then its bcoz of need to update modem files (LP to MM)....
Easy way to overcome it is..... download MM modem ZIP from second post of OFFICIAL CM13 thread (120MB) and flash it using TWRP (If you are using twrp).... THEN you can flash cm13 hopefully without error 7....
If you are using stock recovery then Either u can flash twrp and use above method... OR... Download ASUS ZE550KL firmware zip file from ASUS site (1.6GB) .... Put it in SDCARD... Then boot to stock recovery and use "apply update from sdcard" option... select ZIP... Alongwith firmware Ur Modem files will also update to MM... and now u can flash twrp and then cm13...
sorry.. I know if i am lazy to post direct links...
Try it.. I will help if i can
aadi50 said:
While flashing CM13 if that error 7 includes "asus.verify trustzone failed..." Then its bcoz of need to update modem files (LP to MM)....
Easy way to overcome it is..... download MM modem ZIP from second post of OFFICIAL CM13 thread (120MB) and flash it using TWRP (If you are using twrp).... THEN you can flash cm13 hopefully without error 7....
If you are using stock recovery then Either u can flash twrp and use above method... OR... Download ASUS ZE550KL firmware zip file from ASUS site (1.6GB) .... Put it in SDCARD... Then boot to stock recovery and use "apply update from sdcard" option... select ZIP... Alongwith firmware Ur Modem files will also update to MM... and now u can flash twrp and then cm13...
sorry.. I know if i am lazy to post direct links...
Try it.. I will help if i can
Click to expand...
Click to collapse
Thanks, dude. One question, should I get CM 13.0 or Resurrection Remix ?
Ph4nToM_Z3rO said:
Thanks, dude. One question, should I get CM 13.0 or Resurrection Remix ?
Click to expand...
Click to collapse
We have both stable RR and CM13.
CM is simple and clean and less loaded.... RR is most feature rich Custom rom we have alongwith stability...
Rest depends on what type of user, u are... If u like trying differnt ROMs... Start with CM13...
If u just want to have a feature rich longtime setup, U can use RR directly without wasting time... It is based on CM, So it obviously have everything CM has.... :good:
Ph4nToM_Z3rO said:
Please, like I said, guide me through how to do it. Thanks in advance, in case you help. :good:
Click to expand...
Click to collapse
Latest Stock Marshmallow:
http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE550KL/UL-Z00L-WW-21.40.1220.1877-user.zip
Stock RecoveryRestore it using TWRP)
https://drive.google.com/open?id=0B2BGto29cXq1NjYySjRES21yOTg
Last Lollipop Software:
http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE550KL/UL-Z00L-WW-1.17.40.1531-user.zip
First Lollipop Software:
http://dlcdnet.asus.com/pub/ASUS/ZenFone/ZE550KL/UL-Z00L-WW-1.11.40.299-user.zip
First Do A nandroid backup of your phone. So that if any thing goes wrong, U can recover it.
Then Download both the Stock MM and Recovery file named TWRP.zip.
Extract TWRP.zip.
Then take both the MM software and Xtracted TWRP folder in a memory card.
Then Open TWRP recovery in ur phone and restore the stock recovery.
Then Erase Every Thing including System.
Then Restart The recovery. Now you will see that the recovery has gone back to the stock recovery.
Now flash the stock marshmallow from your memory card.
Then flash TWRP from fastboot and thn u can flash any supported custom Android MM or Android N.
N.B. If it dosent work. Then you have to first install the last lollipop Zenfone 2 Laser(Z00LD) software then install the marshmallow.

Green screen after flashing custom ROM

Hey friends i am seeing green screen after flashing custom ROM and i am not able to boot into custom rom.
Phone model Samsung j500F 2015.
aytida4 said:
Hey friends i am seeing green screen after flashing custom ROM and i am not able to boot into custom rom.
Phone model Samsung j500F 2015.
Click to expand...
Click to collapse
It's because you are flashing MM rom (except cm13) and you are on Lollipop or vice versa.
#Henkate said:
It's because you are flashing MM rom (except cm13) and you are on Lollipop or vice versa.
Click to expand...
Click to collapse
No friend actually I m using marshmallomarshmallow stock
Rom and I'm installing ressurction Rom 6.0 but still it is showing green screen. Is it the problem of BOOTLOADER?
aytida4 said:
No friend actually I m using marshmallomarshmallow stock
Rom and I'm installing ressurction Rom 6.0 but still it is showing green screen. Is it the problem of BOOTLOADER?
Click to expand...
Click to collapse
I have the same problem …
aytida4 said:
No friend actually I m using marshmallomarshmallow stock
Rom and I'm installing ressurction Rom 6.0 but still it is showing green screen. Is it the problem of BOOTLOADER?
Click to expand...
Click to collapse
SiiXFX said:
I have the same problem …
Click to expand...
Click to collapse
You must be on Lollipop to flash RR 6.0.1, just like CM13.
#Henkate said:
You must be on Lollipop to flash RR 6.0.1, just like CM13.
Click to expand...
Click to collapse
Thanks friend I will try.
Same Green Screen
I have a same problem and i try the first 5.1.1 rom and after it i install the cyanogenmod 13 which i found in the rom article anybody can help me ? skype or somthing call service ?
Vityy said:
I have a same problem and i try the first 5.1.1 rom and after it i install the cyanogenmod 13 which i found in the rom article anybody can help me ? skype or somthing call service ?
Click to expand...
Click to collapse
Friend i had that problem then i installed stock 5.1.1 rom and
Then tried this and then it is working good. U can also
Try this.
aytida4 said:
Friend i had that problem then i installed stock 5.1.1 rom and
Then tried this and then it is working good. U can also
Try this.
Click to expand...
Click to collapse
I flashed the 5.1.1 rom but still i get the green screen/lines at the boot. I always get bootloops when i flash any zip. Plz help
aytida4 said:
Hey friends i am seeing green screen after flashing custom ROM and i am not able to boot into custom rom.
Phone model Samsung j500F 2015.
Click to expand...
Click to collapse
Possible problems,
- the rom is not for your device or variant
- The bootloader is for another version of Android
- Twrp was compiled with a different version of Android so are you going to get an error.
- Your bad luck exceeds an acceptable level ... ???
I have the same problem on my j500h too its turn to yellow color until the logo cant see because of that color i flashed custom kernel properly step by step 2 custom kernel i flashed they have already problem with that im running on 5.1.1 lollipop and my build number is LMY48B.J500HXXU1APA5
Keancarl said:
I have the same problem on my j500h too its turn to yellow color until the logo cant see because of that color i flashed custom kernel properly step by step 2 custom kernel i flashed they have already problem with that im running on 5.1.1 lollipop and my build number is LMY48B.J500HXXU1APA5
Click to expand...
Click to collapse
Which Custom Rom did you flash?
Keancarl said:
I have the same problem on my j500h too its turn to yellow color until the logo cant see because of that color i flashed custom kernel properly step by step 2 custom kernel i flashed they have already problem with that im running on 5.1.1 lollipop and my build number is LMY48B.J500HXXU1APA5
Click to expand...
Click to collapse
You get green screen when:
1) You flash MM ROMs (based on stock Touchwiz MM) over Lollipop and vice versa.
2) You flash MM/N ROMs (based on AOSP/CM such as LOS13, AOSIP, Mokee etc.) over Lollipop and vice versa.
3) I can't confirm this, but based on your comment, you get green screen when you flash a MM kernel over Lollipop and of course, vice versa too.
AndroiDTechi said:
Which Custom Rom did you flash?
Click to expand...
Click to collapse
not custom rom but kernel idk what the problem is so now i decided to have android backup in order to back again to my current system
---------- Post added at 06:46 AM ---------- Previous post was at 06:31 AM ----------
#Henkate said:
You get green screen when:
1) You flash MM ROMs (based on stock Touchwiz MM) over Lollipop and vice versa.
2) You flash MM/N ROMs (based on AOSP/CM such as LOS13, AOSIP, Mokee etc.) over Lollipop and vice versa.
3) I can't confirm this, but based on your comment, you get green screen when you flash a MM kernel over Lollipop and of course, vice versa too.
Click to expand...
Click to collapse
:good: i back to its current system now what i want is stock rom with customize and rooted system
aytida4 said:
Hey friends i am seeing green screen after flashing custom ROM and i am not able to boot into custom rom.
Phone model Samsung j500F 2015.
Click to expand...
Click to collapse
Flash 5.1.1 cynogenmod rom then install RR remix
Demicro said:
Possible problems,
- the rom is not for your device or variant
- The bootloader is for another version of Android
- Twrp was compiled with a different version of Android so are you going to get an error.
- Your bad luck exceeds an acceptable level ...
Click to expand...
Click to collapse
For those, who -as I did - don't really understand this (see the quote)...
I had the same issue when I wanted to install a custom Marshmallow ROM (6.0.1) over my stock Lollipop (5.1.1). The solution was to download and flash a new Bootloader and Modem with Odin. See tis:
https://forum.xda-developers.com/galaxy-j5/how-to/6-0-1-5-1-1-bootloader-modem-j500xx-t3566801
I just ran into this error while trying to install a custom ROM for my J500H.
My phone was running latest 6.0.1. I installed TWRP from This thread, then installed followed the instructions to install Resurrection Remix (7.1.2), but on first boot i got the green screen with the error (set warranty bit: kernel). Also tried Lineage 14.0 but doesn't work. I can still enter TWRP and download mode after getting this error.
This is my first time flashing a Samsung device. Could someone tell me what i did wrong?
https://forum.xda-developers.com/galaxy-j5/development/rom-resurrectionremix-v5-8-1-t3566035
iH8Ecchi said:
I just ran into this error while trying to install a custom ROM for my J500H.
My phone was running latest 6.0.1. I installed TWRP from This thread, then installed followed the instructions to install Resurrection Remix (7.1.2), but on first boot i got the green screen with the error (set warranty bit: kernel). Also tried Lineage 14.0 but doesn't work. I can still enter TWRP and download mode after getting this error.
This is my first time flashing a Samsung device. Could someone tell me what i did wrong?
Click to expand...
Click to collapse
Sorry, first time i didn't your post till the end.
First of all.
Restore firmware with "Samsung smart switch".
You can downgrade to 5.1.1 by this instruction.
1.Flash this firmware by Odin
https://drive.google.com/file/d/0B-pt1IG7T4hmVzhuMnRyeTBjTGM/view?usp=drivesdk
(Before flashing, wipe all storages(all except internal, external in advanced wipe. If you have stock recovery, you must do both wipes)
2. After first boot flash recovery from Vince
(for both bootloaders)
3. Before flashing RR5.8.4 wipe all storages too( all, except extrnl and intrlnl)
4. Flash RR and gapps.
5. Wipe data and cache.
wrongwriter3 said:
Sorry, first time i didn't your post till the end.
First of all.
Restore firmware with "Samsung smart switch".
You can downgrade to 5.1.1 by this instruction.
1.Flash this firmware by Odin
https://drive.google.com/file/d/0B-pt1IG7T4hmVzhuMnRyeTBjTGM/view?usp=drivesdk
(Before flashing, wipe all storages(all except internal, external in advanced wipe. If you have stock recovery, you must do both wipes)
2. After first boot flash recovery from Vince
(for both bootloaders)
3. Before flashing RR5.8.4 wipe all storages too( all, except extrnl and intrlnl)
4. Flash RR and gapps.
5. Wipe data and cache.
Click to expand...
Click to collapse
Did you mean i have to flash RR over 5.1.1? Last time i ran into this error i was flashing it over 6.0.1, and I did full wipes within TWRP.
iH8Ecchi said:
Did you mean i have to flash RR over 5.1.1? Last time i ran into this error i was flashing it over 6.0.1, and I did full wipes within TWRP.
Click to expand...
Click to collapse
Yes.
Because it work only with 5.1.1 bootloader.

ROMs for SM-G900F

What ROMs exist that I can use on SM-G900F ?
I dont want any missing features or bugs if possible.
I dont need Android 9, cause I read that everything is not working.
I rooted my SM-G900F, whar is next step to install a ROM ?
Yes Im not a proffessional
Use the dev forums!
zooorgie said:
What ROMs exist that I can use on SM-G900F ?
I dont want any missing features or bugs if possible.
I dont need Android 9, cause I read that everything is not working.
I rooted my SM-G900F, whar is next step to install a ROM ?
Yes Im not a proffessional
Click to expand...
Click to collapse
​If U are Rooted, u would be having TWRP recovery installed, if yes go to S5 dev forum find a ROM and Follow Instructions, usually flashing a zip file or two.
Cheers!!:good:
I did and it worked, but Supersu dissapeared after flashing Lineage 15.1
I guess I can reinstall it.
But then I heard about Magisk, that should be better...
But how do I replace TWRP with Magisk after insalled Lineage ?
Is it even advisable ?

J5 2015 isnt installing custom roms and Just Bootloops

I recently flashed my J5 2015 (smj500f) with twrp and everything was fine till it came to installing A custom rom. I started with a rom called serinty and Followed the steps.. the rom installs properly but as soon as i press reboot the phone just goes blue... and starts rebooting over and over again! ....plz ive tried 3roms so far and still the phone wont switch on.. The other roms have MD5 verification error. I cant restore the Stock rom cz its just Not what i want now... anyone with a fix plx
cybersev3n said:
I recently flashed my J5 2015 (smj500f) with twrp and everything was fine till it came to installing A custom rom. I started with a rom called serinty and Followed the steps.. the rom installs properly but as soon as i press reboot the phone just goes blue... and starts rebooting over and over again! ....plz ive tried 3roms so far and still the phone wont switch on.. The other roms have MD5 verification error. I cant restore the Stock rom cz its just Not what i want now... anyone with a fix plx
Click to expand...
Click to collapse
You flashed the wrong ROM (other model)
Make sure about what you download and flash(read its name)(it should be for j500f)
And about MD5 error
I have faced it when my TWRP was so old
Flash the newest TWRP
Let us know if didn't work again
cybersev3n said:
I recently flashed my J5 2015 (smj500f) with twrp and everything was fine till it came to installing A custom rom. I started with a rom called serinty and Followed the steps.. the rom installs properly but as soon as i press reboot the phone just goes blue... and starts rebooting over and over again! ....plz ive tried 3roms so far and still the phone wont switch on.. The other roms have MD5 verification error. I cant restore the Stock rom cz its just Not what i want now... anyone with a fix plx
Click to expand...
Click to collapse
did you specifically choose a rom for j500fn (j5nlte)? ive had 3 of the 2015 j5's and ive never had an issue except for the error 7....
i cant find this serenity rom for 2015 j5 (nvm found it) ... but i can see that its based on 7.1.1 Touchwiz but number one requirement is
Code:
1. You should have 6.0.1 based firmware
, make sure you flash the bootloader and modem from
HTML:
https://forum.xda-developers.com/galaxy-j5/how-to/6-0-1-5-1-1-bootloader-modem-j500xx-t3566801
for 6.0.1.. and if you are going to use any roms after 7..0 then flash back the nougat bootloader and modem.... though i dont understand why "its just not what i want now"... youre just going from one touchwiz rom to the other... you coulda just installed a custom kernel and root and customize to your hearts content, on a newer android version
---------- Post added at 08:20 PM ---------- Previous post was at 08:18 PM ----------
amirizad_7436 said:
You flashed the wrong ROM (other model)
Make sure about what you download and flash(read its name)(it should be for j500f)
And about MD5 error
I have faced it when my TWRP was so old
Flash the newest TWRP
Let us know if didn't work again
Click to expand...
Click to collapse
serenity is apparently a port based on j5 2016 7.1.1 touchwiz but for some reason requires old BL and MODEM.. but the rest is correct, and md5 can be skipped by ticking the box before flashing
efinityy said:
did you specifically choose a rom for j500fn (j5nlte)? ive had 3 of the 2015 j5's and ive never had an issue except for the error 7....
i cant find this serenity rom for 2015 j5 (nvm found it) ... but i can see that its based on 7.1.1 Touchwiz but number one requirement is , make sure you flash the bootloader and modem from https://forum.xda-developers.com/galaxy-j5/how-to/6-0-1-5-1-1-bootloader-modem-j500xx-t3566801
for 6.0.1.. and if you are going to use any roms after 7..0 then flash back the nougat bootloader and modem.... though i dont understand why "its just not what i want now"... youre just going from one touchwiz rom to the other... you coulda just installed a custom kernel and root and customize to your hearts content, on a newer android version
---------- Post added at 08:20 PM ---------- Previous post was at 08:18 PM ----------
serenity is apparently a port based on j5 2016 7.1.1 touchwiz but for some reason requires old BL and MODEM.. but the rest is correct, and md5 can be skipped by ticking the box before flashing
Click to expand...
Click to collapse
6.0.1 bootloader and modem is the latest for this device. There is no nougat bootloader and modem
amirizad_7436 said:
You flashed the wrong ROM (other model)
Make sure about what you download and flash(read its name)(it should be for j500f)
And about MD5 error
I have faced it when my TWRP was so old
Flash the newest TWRP
Let us know if didn't work again
Click to expand...
Click to collapse
I flashed the new TWRP 3.0.xx even the moded one.... The Serinity rom V6.0 has aroma which had 2 options (J500H-Fxx and J5 2016) i even tried to Choose each options cz i knew i couldnt damage it any worse?. But still.. i flashed the stock rom back thou but reinstalled TWRP ...im gonna Buy Data and Select 4more roms and see which one works.. thanks for replying:good:
efinityy said:
did you specifically choose a rom for j500fn (j5nlte)? ive had 3 of the 2015 j5's and ive never had an issue except for the error 7....
i cant find this serenity rom for 2015 j5 (nvm found it) ... but i can see that its based on 7.1.1 Touchwiz but number one requirement is
Code:
1. You should have 6.0.1 based firmware
, make sure you flash the bootloader and modem from
HTML:
https://forum.xda-developers.com/galaxy-j5/how-to/6-0-1-5-1-1-bootloader-modem-j500xx-t3566801
for 6.0.1.. and if you are going to use any roms after 7..0 then flash back the nougat bootloader and modem.... though i dont understand why "its just not what i want now"... youre just going from one touchwiz rom to the other... you coulda just installed a custom kernel and root and customize to your hearts content, on a newer android version
---------- Post added at 08:20 PM ---------- Previous post was at 08:18 PM ----------
serenity is apparently a port based on j5 2016 7.1.1 touchwiz but for some reason requires old BL and MODEM.. but the rest is correct, and md5 can be skipped by ticking the box before flashing
Click to expand...
Click to collapse
Thanks...but im just gonna save myself all the trouble lol.. im thinking of porting my own roms thou cz i cant really get all i want in one rom its either Ui bugs or icons or just the launcher icons ahhhh..
cybersev3n said:
did you specifically choose a rom for j500fn (j5nlte)? ive had 3 of the 2015 j5's and ive never had an issue except for the error 7....
i cant find this serenity rom for 2015 j5 (nvm found it) ... but i can see that its based on 7.1.1 Touchwiz but number one requirement is
Thanks...but im just gonna save myself all the trouble lol.. im thinking of porting my own roms thou cz i cant really get all i want in one rom its either Ui bugs or icons or just the launcher icons ahhhh..
Click to expand...
Click to collapse
If you wanna try TW noghat then ROM try sep 8.5
It's perfect at all
cybersev3n said:
did you specifically choose a rom for j500fn (j5nlte)? ive had 3 of the 2015 j5's and ive never had an issue except for the error 7....
i cant find this serenity rom for 2015 j5 (nvm found it) ... but i can see that its based on 7.1.1 Touchwiz but number one requirement is
Thanks...but im just gonna save myself all the trouble lol.. im thinking of porting my own roms thou cz i cant really get all i want in one rom its either Ui bugs or icons or just the launcher icons ahhhh..
Click to expand...
Click to collapse
Then try using The rom you want with something such as nova launcher and have your own icon pack

Categories

Resources