SM-G930A Cannot boot. Attempting to flash offical firmware using odin fails - AT&T Samsung Galaxy S7 Questions & Answers

I get this error while attempting to flash official ROM using Odin. the phone currently cannot boot. Please assist in any way possible. I just would like to get my phone to function like normal again. I attempted to flash only AP
ON PC LOG
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ON PHONE
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
SW REV CHECK FAIL : [system]Fused 3 > Binary 1
Any way I can get the phone usable again? I really would like if anyone could assist in get it working again. It does not need to be rooted, it only needs to boot and function

Mine did same thing. I fixed mine by doing a factory reset from recovery mode. Reboot the phone and hold power+volume up+home key at same time until u see recovery mode in top left corner. It will say installing system update then go to a menu. Hit volume down till factory reset is highlighted. Hit the power button. After its complete go to wipe cache and wipe it also. Then click reboot system now and should now boot fine

Js7bla said:
Mine did same thing. I fixed mine by doing a factory reset from recovery mode. Reboot the phone and hold power+volume up+home key at same time until u see recovery mode in top left corner. It will say installing system update then go to a menu. Hit volume down till factory reset is highlighted. Hit the power button. After its complete go to wipe cache and wipe it also. Then click reboot system now and should now boot fine
Click to expand...
Click to collapse
I've had to do the same thing in a similar situation and it fixed it for me. Good fix!

Are you sure the stock version you are trying to flash is the same or newer than the version you had installed?

jpasher said:
Are you sure the stock version you are trying to flash is the same or newer than the version you had installed?
Click to expand...
Click to collapse
I think you have to Flash all 4 of the files, AP,BL, CP, CSC in Odin Latest version of stock is APK1

I flashed just this AP_G930AUCS4API2_CL8575098_QB10880146_REV02_user_low_ship_MULTI_CERT.tar in the AP section and my phone worked again. I don't know if that' might be bad thing or not though

I choose Phone Bootloader Update in Odin. It was the only thing that worked for me.

Related

Help my gt-i9505 stocked on samsung logo..

i will tell all the information here..i have my samsung gt-i9505 carrier locked to globe telecom here in the philippines..
i tried to factory unlock here http://forum.xda-developers.com/showthread.php?t=2282683 but i have no luck on it..i have change my baseband several time via odin but still i pin request always shows after i reboot..i have android version 4.2.2, stock firmware DXUBMF8.
so i stopped from there..i moved on to try to root my s4,before having this phone i had owned a s4 factory unlock and i have had rooted it but i already forgot how to do it again..so started anew by looking again at forum threads,i have tried omega custom rom but if i goes to recovery mode my screen only shows the following options: reboot system now, apply update from ADB, apply update from external storage, wipe data/factory reset, wipe cache partition, apply update cache..my question here was,is this the default recovery mode of s4 now?because i can still recall that my last s4's default recovery menu shows with advance option with wipe dalvik cache etc..and my recovery menu now shows no apply update from internal storage..when i tried flashing the custom rom save on my sd card: apply update>omega*something*.zip..it all well done but after rebooting my phone didn't any stuff from that custom rom nor rooted at all..can you help me solving this?
and lastly this is my main problem now,i searched again the thread and went down to this thread http://forum.xda-developers.com/showthread.php?t=2250824 i downloaded the pre-rooted rom XXUBMF8..flashed it with odin PDA..passed and from then my phone was stocked every time i reboot to samsung logo..
i have tried to flash again on a stocked rom. odin>PHONE>(the stock rom)>start>passed then reboot it still stocked to samsung logo..
sorry this was too long to read but i have to tell what all i have been done resulting to this..can someone help me..i will be very thanful for your help..
can anyone help me with this?i have been searching the forum for hours..i have done flashing through odin with stock rom and pit file but it ended up failed..done factory reset with default recovery mode but nothing happens still stucked on boot logo..
still no luck.. it was almost 24 hours since my phone bricked..can someone kindly help me.
voidjov said:
still no luck.. it was almost 24 hours since my phone bricked..can someone kindly help me.
Click to expand...
Click to collapse
The recovery your talking about is cwm not default s4 recovery you'll find that recovery here
http://forum.xda-developers.com/showthread.php?t=2281367
After its installed try wiping data then cache then going into advanced and wiping dalvik cache
S4 Info
did you try from the stock rom to go to recovery many and wipe to factory default again...
Have you tried to install a recovery like Philz and see if you can access the file system of your GS4.
You'll also find more wiping option
Edit: oh great some1 posted before me.
also try to do it from your official rom
TingTingin said:
The recovery your talking about is cwm not default s4 recovery you'll find that recovery here
http://forum.xda-developers.com/showthread.php?t=2281367
After its installed try wiping data then cache then going into advanced and wiping dalvik cache
S4 Info
Click to expand...
Click to collapse
no it was stock recovery what i have used not cwm i think..thats the problem because i am used to using cwm that's where all my problem started because i used stock recovery instead which i am not so familiar.
daibaron said:
did you try from the stock rom to go to recovery many and wipe to factory default again...
Have you tried to install a recovery like Philz and see if you can access the file system of your GS4.
You'll also find more wiping option
Edit: oh great some1 posted before me.
also try to do it from your official rom
Click to expand...
Click to collapse
i have read philz thread and tried flash the .tar file with PDA odin but an error shows:
odin failed once again after flashing a stock rom, the error was:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Removed!!
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
no im on a screen shows firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.,
now i cant go even on a stock recovery but i can do download/odin mode..i will not do any further steps from now on,i will wait for your help guys,i don;t want to pay to unbricked my s4,i have to fix it all by myself and your kind help guys..
voidjov said:
no it was stock recovery what i have used not cwm i think..thats the problem because i am used to using cwm that's where all my problem started because i used stock recovery instead which i am not so familiar.
i have read philz thread and tried flash the .tar file with PDA odin but an error shows:
odin failed once again after flashing a stock rom, the error was:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Removed!!
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
no im on a screen shows firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.,
now i cant go even on a stock recovery but i can do download/odin mode..i will not do any further steps from now on,i will wait for your help guys,i don;t want to pay to unbricked my s4,i have to fix it all by myself and your kind help guys..
Click to expand...
Click to collapse
In the Thread you point out... read AGAIN about PIT
http://forum.xda-developers.com/showthread.php?t=2265477
Download the PIT and follow the exact procedure... it's not like flashing a new firmware so read which boxes you check
Try the PIT file with / without the firmware
check also this thread... in case you have a pit related error.
http://forum.xda-developers.com/showthread.php?t=2283919
I'm sure you have all you need to recover your phone.
When you will have recovered your phone, update this thread saying you solved your problem.
check also this thread... in case you have a pit related error.
OH, don't forget to update my thanks counter
Hello,
I saw an answer to this problem in another thread. You have to swipe the phone by starting it with VOLUME UP + HOME + POWER, and then whatever options you have to swipe everything.
Problem SOLVED!!!
hey guys i have solved my greatest problem since i started rooting back on my N7100,my 1st s4 and now my new s4..
thank you for all who helped me,after more than 24hours of reading and waiting for you replies and doing some intervention on my s4,i have recover it..i will post here how i did it for reference for others who might encounter this problem same as mine:
first of all i have noticed this just after successfully revived my phone, you have to WIPE THE DATA/FACTORY REFORMAT via recovery mode before and after doing any firmware update,then i just removed my battery may be a minute and put it back again every time i do flashing..
i used odin version 1.85 not version 3.04..i first chose the pit file and flash it.(when i tried flashing the pit and stock rom together it always ended up to fail)..so i decided to chose to flash the pit file only using odin v1.85(it automatically ticked the "repartition option on this odin version" then it passed..after that as i have said remove battery,wipe data,then i removed again the battery,then put it back and do download/odin mode on my phone,then i flashed stock rom from www.sammoble.com, i searched for globe carrier since my phone was locked on that carrier, then after 2-3minutes(be patient and don't do anything while waiting) my phone backed to life!!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMF8_I9505OLBBMF8_I9505DXUBMF8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> NON-HLOS.bin
<ID:0/003> modem.bin
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
<ID:0/003> Completed..
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/003> Removed!!
for those guys who helped me, i have pressed the thanks button for you guys 100x(i hope i can do that)..but truly i am very much thankful for you guys..i do not have to go to service provider technician or any cellphone repair stall just to repair my phone and pay,i have revived it with your help..THANK YOU!!!
i must add i would like to ask what is the best way to root my phone, i have read chainfire autoroot, is the best way to root my phone?as i can remember it is the same way i have rooted my first s4 two months ago because i saw my old folder here on my pc with that application..and best custom rom?
and the best way to factory unlock my phone, the working firmware..
you can post the link so i can read and do it myself..

[Guide] Samsung Galaxy J700P root w/ TWRP

TWRP Link: https://dl.twrp.me/j7ltespr/
Phh's SuperUser: http://forum.xda-developers.com/android/software-hacking/wip-selinux-capable-superuser-t3216394
Odin: http://odindownload.com/ (DOWNLOAD 3.0.9)
After you download TWRP, install Odin. Then follow the steps below.
1. Launch Odin
2. Put your J7 into download mode (hold volDown + power + home during boot)
3. Using your charger cord, plug your J7 into your PC while it's in download mode; make sure Odin is open.
4. In Odin, press the 'AP' button, and select the TWRP .tar you downloaded. (DO NOT CHANGE ANY OTHER SETTINGS.)
5. Verify that the checkbox by 'AP' is selected, then click the 'Start' button.
6. Once that's finished, your phone will reboot. Press volUp + power + home before you see the boot screen to verify that TWRP is installed. Reboot to system afterward.
7. On your J7, go to the SuperUser download link, and download it.
8. Once phh's SuperUser is downloaded, reboot and get into TWRP. (Press volUp + power + home before you see the boot screen)
9. When you get into TWRP, press the 'Install' button. Go to the directory where you downloaded the SuperUser .img, and select it.
10. Once you select it, it will ask you to swipe to install it. Go ahead and do that, and phh's SuperUser should be installed. (be sure to go to the play store and get his app to actually complete installation.)
11. When you reboot, you should be rooted!
Thanks to @CoffeeNAndroid for pointing out this method of rooting.
Thanks for the guide. I find that no matter if you flash cf auto root or twrp to root youre going to have to reflash that stock recovery... it makes since to root with twrp cause you can flash all the zips you want and backup youre rom all in one trip before you reflash the stock recovery... i can understand some people are like well i want a permanent twrp recovery without having to have to keep using odin to flash the twrp and stock recovery but this is what is available right now at this time...
Can you post the stock recovery.img for me please j700p.
http://forum.xda-developers.com/galaxy-j7/development/samsung-stock-recovery-700p-read-t3454061
just made one that works... swap back and forth to fix issues from time to time
We need to fix the TWRP issue
thank you.
orginally rooted with cf-autoroot which rooted it fine, but caused a boot loop. so i followed your guide, and voila, installed twrp and supersu, zero issues. thanks brother.
phrost.​
Can anyone help me with this? I don't know why I always have an issue, using a J7, I did the following :
Open odin 3.12
put phone in DL mode
connect phone and says "added"
click AP and select the .tar file, check box is checked
click start and get this
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help this is damning how I seem to have an issue every time I try and do this....
no one?
Damani311 said:
Can anyone help me with this? I don't know why I always have an issue, using a J7, I did the following :
Open odin 3.12
put phone in DL mode
connect phone and says "added"
click AP and select the .tar file, check box is checked
click start and get this
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> RQT_CLOSE !!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help this is damning how I seem to have an issue every time I try and do this....
Click to expand...
Click to collapse
Did you enabled the oem unlock
Will this work for Boost Mobil J700P with new recent update?
iram said:
Will this work for Boost Mobil J700P with new recent update?
Click to expand...
Click to collapse
Yes it should work i think
I need a root process without pc
Kibathefeng said:
I need a root process without pc
Click to expand...
Click to collapse
No way to root this model without pc
phones rooted so it says, supersu cant get rid of knox driving me nuts j700p marshmellow
I have a J700p under Boost Mobile. I already have it rooted and I have BusyBox. Does this change anything? Is there something different that I have to do since it's already rooted? And can I backup my stuff to my computer?
Virgin mobile galaxy J700P
adhdluke said:
I have a J700p under Boost Mobile. I already have it rooted and I have BusyBox. Does this change anything? Is there something different that I have to do since it's already rooted? And can I backup my stuff to my computer?
Click to expand...
Click to collapse
If you installed twrp recovery you can make a backup an flash other roms an copy the backup to your PC if you want ! Use the latest twrp an flash it using odin if you havent already !
Help
nothing is working for me loosing my mind...

Help special case to flash stock rom in s7 edge 935a

Hello every one, i am here to ask help for a special case, if is there someone with the knowlege in XDA to help mein this, i got a friend who has his s7 edge from at&t one day not working anymore it got stuck in boot loop, he never try to root or nothing he is a normal simple phone user. so now i am trying to help him but i dont know which firmware the phone had, i cant put developer options , the usb debugging nothing etc, i try to start in recovery mode but it get stuck in blue letters that say recover booting and never boot into recovery, the only thing the phone do now is get into download mode, and the pc recognize it and odin too, i have read every single thread i think to flash every single stock rom available and none has work i try diferent pc´s, cables, usb port, odin version etc. the most common error i got all times by odin was this one
ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i am noob in this things i barely know a little readding all the threads i have put so much effort on this without success ,
can someone guide me please i will apreciate it
Darkboss10 said:
Hello every one, i am here to ask help for a special case, if is there someone with the knowlege in XDA to help mein this, i got a friend who has his s7 edge from at&t one day not working anymore it got stuck in boot loop, he never try to root or nothing he is a normal simple phone user. so now i am trying to help him but i dont know which firmware the phone had, i cant put developer options , the usb debugging nothing etc, i try to start in recovery mode but it get stuck in blue letters that say recover booting and never boot into recovery, the only thing the phone do now is get into download mode, and the pc recognize it and odin too, i have read every single thread i think to flash every single stock rom available and none has work i try diferent pc´s, cables, usb port, odin version etc. the most common error i got all times by odin was this one
ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i am noob in this things i barely know a little readding all the threads i have put so much effort on this without success ,
can someone guide me please i will apreciate it
Click to expand...
Click to collapse
Remove PIT file and try again.
From Edge of Galaxy Seven
Darkboss10 said:
Hello every one, i am here to ask help for a special case, if is there someone with the knowlege in XDA to help mein this, i got a friend who has his s7 edge from at&t one day not working anymore it got stuck in boot loop, he never try to root or nothing he is a normal simple phone user. so now i am trying to help him but i dont know which firmware the phone had, i cant put developer options , the usb debugging nothing etc, i try to start in recovery mode but it get stuck in blue letters that say recover booting and never boot into recovery, the only thing the phone do now is get into download mode, and the pc recognize it and odin too, i have read every single thread i think to flash every single stock rom available and none has work i try diferent pc´s, cables, usb port, odin version etc. the most common error i got all times by odin was this one
ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i am noob in this things i barely know a little readding all the threads i have put so much effort on this without success ,
can someone guide me please i will apreciate it
Click to expand...
Click to collapse
Not knowing WHAT you are flashing, makes it a little harder to determine what is going wrong.
Go HERE and flash this in Download Mode. This is the latest Stock 935A ROM, This will wipe Everything on the device, and it'll be like it came brand new
norbarb said:
Remove PIT file and try again.
From Edge of Galaxy Seven
Click to expand...
Click to collapse
which is the pit file, sorry for dumb question
Darkboss10 said:
which is the pit file, sorry for dumb question
Click to expand...
Click to collapse
If I remember correctly you need to uncheck PIT in odin and this should help. BTW. What are you trying to flash?
From Edge of Galaxy Seven
I have try the stock rom version 935a...pf2 . And any other stock rom i have found for the 935a seeing which will work .
Darkboss10 said:
I have try the stock rom version 935a...pf2 . And any other stock rom i have found for the 935a seeing which will work .
Click to expand...
Click to collapse
If you are currently on a ROM that has v4 boot loader's, part of your problem may be that you are trying to flash a rom with v2, v3 bootloaders
Sent from my SM-G935T using XDA-Developers Legacy app
so i do better go with the v4 bootloader and i will check if the pit file is uncheck, what should i put on the re-partition case of odin active or inactive?
by the way thanks for your help
kangi26 said:
If you are currently on a ROM that has v4 boot loader's, part of your problem may be that you are trying to flash a rom with v2, v3 bootloaders
Sent from my SM-G935T using XDA-Developers Legacy app
Click to expand...
Click to collapse
hey i did exactly as you told me , and for first time i guess i have an advance, i still get an error but at least a new error , check it out maybe you know what it is
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> emmc_appsboot.mbn
<ID:0/005> lksecapp.mbn
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
any idea what can be?
i try to flash the G935a...PI2 rom bot without the CSC which i guess is the pit file right?
When you try to get the device into Recovery, it will appear like it isn't doing it or looks like an "No Command" error and it can take a couple of min to actually get into Recovery.
I would boot into Recovery again, let it sit for a few min. My bet is that it will eventually get into Recovery. Once it does, do a Factory reset, and then reboot into Download Mode, open Odin connect the device to your PC and install all 4 of the items from the Stock ROM thread, don't mess with any of the settings in Odin, just populate the slots with the BL, AP, CP and CSC
kangi26 said:
When you try to get the device into Recovery, it will appear like it isn't doing it or looks like an "No Command" error and it can take a couple of min to actually get into Recovery.
I would boot into Recovery again, let it sit for a few min. My bet is that it will eventually get into Recovery. Once it does, do a Factory reset, and then reboot into Download Mode, open Odin connect the device to your PC and install all 4 of the items from the Stock ROM thread, don't mess with any of the settings in Odin, just populate the slots with the BL, AP, CP and CSC
Click to expand...
Click to collapse
This is what i get . But it doesnt enter recovery at the end. It just shut off ....
Darkboss10 said:
This is what i get . But it doesnt enter recovery at the end. It just shut off ....
Click to expand...
Click to collapse
Looks like the device is just rebooting
Sent from my SM-G935T using XDA-Developers Legacy app
kangi26 said:
Looks like the device is just rebooting
Sent from my SM-G935T using XDA-Developers Legacy app
Click to expand...
Click to collapse
if you watch the top corner blue letters it says recovery booting....
Darkboss10 said:
if you watch the top corner blue letters it says recovery booting....
Click to expand...
Click to collapse
I'm at a loss man, I'm sorry. I haven't seen that before, I dont get the "Samsung" part when I enter Recovery
Darkboss10 said:
if you watch the top corner blue letters it says recovery booting....
Click to expand...
Click to collapse
Can you post screen from download mode?
From Edge of Galaxy Seven
norbarb said:
Can you post screen from download mode?
From Edge of Galaxy Seven
Click to expand...
Click to collapse
There you go . By the way i should mention the phone only turns on download mode when plugged.
Darkboss10 said:
There you go . By the way i should mention the phone only turns on download mode when plugged.
Click to expand...
Click to collapse
OK you got bootloader v2. Try to flash some older version of MM in download mode using odin
Like from here: http://forum.xda-developers.com/showthread.php?p=67601581
From Edge of Galaxy Seven
You need to start by using the latest Odin, 3.12.3 for installing the original ROM. If you try to unlock, you need to go get the PrinceComsy version. PrinceComsy won't work for in-bricking a device, and if you have any of the stock versions of the ROM, you need the 3.12.3 version.
norbarb said:
OK you got bootloader v2. Try to flash some older version of MM in download mode using odin
Like from here: http://forum.xda-developers.com/showthread.php?p=67601581
From Edge of Galaxy Seven
Click to expand...
Click to collapse
I try that . Now i got this error but only on the phone screen and odin is stuck at initialization .. any idea what could be
i download the venom stock rom and the odin file he suggest but that odin is v 3.11.2 , so that was the one that trows me the odin protocol error, i try the same rom but with the v 3.12.3 odin , and it start working but it says fail at the on the recovery image, do that has to do something with my problem that the phone can boot into recovery mode?
here are the logs
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> FAIL! (Erase)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1

Samsung S8 bricked, odin not flashing stock firmware

Hello,
I'm trying to recover from a soft brick from flashing TWRP on my G950U, but odin isn't able to write stock firmware. Here's the log:
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> persist.img.ext4
<ID:0/003> userdata.img.ext4
<ID:0/003> Home Binary Download
<ID:0/003> Total Binary size: 4813 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003>
<ID:0/003>
<ID:0/003>
<ID:0/003> FAIL! (DeviceInfo)
<OSM> All threads completed. (succeed 0 / failed 1)
The firmware I'm trying to flash is G950USQS3CRE2_G950UOYN3CRE2_SPR.zip from sammobile.
I've downloaded the samsung USB drivers, my phone is in download mode, and I'm getting this error with different cables, ports and computers.
Any ideas on what I can try?
Check odin version..use latest version.
PeterParker said:
Check odin version..use latest version.
Click to expand...
Click to collapse
Is 3.13.1 not the latest version? I couldn't find anything beyond that, but there's also a version called Prince Comsy Odin, which also gave a similar error.
joebhakim said:
Hello,
I'm trying to recover from a soft brick from flashing TWRP on my G950U, but odin isn't able to write stock firmware. Here's the log:
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> persist.img.ext4
<ID:0/003> userdata.img.ext4
<ID:0/003> Home Binary Download
<ID:0/003> Total Binary size: 4813 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003>
<ID:0/003>
<ID:0/003>
<ID:0/003> FAIL! (DeviceInfo)
<OSM> All threads completed. (succeed 0 / failed 1)
The firmware I'm trying to flash is G950USQS3CRE2_G950UOYN3CRE2_SPR.zip from sammobile.
I've downloaded the samsung USB drivers, my phone is in download mode, and I'm getting this error with different cables, ports and computers.
Any ideas on what I can try?
Click to expand...
Click to collapse
1. Boot into download mode screen by pressing power button + volume down + Bixby button.
2. Press volume down to restart phone.
3. Quickly press the power + volume down + Bixby button and go back into download mode .
4. Press continue 5. Congratulations full working now. Try firmware flash and it should wok.
pokoo2 said:
1. Boot into download mode screen by pressing power button + volume down + Bixby button.
2. Press volume down to restart phone.
3. Quickly press the power + volume down + Bixby button and go back into download mode .
4. Press continue 5. Congratulations full working now. Try firmware flash and it should wok.
Click to expand...
Click to collapse
Thank you for the suggestion. When I try this, the "Security Error: This phone has been flashed with unauthorized software..." screen comes up after I restart, instead of the second download mode. Am I doing this wrong?
Also, I've been holding down volume UP + bixby + power while flashing, or else odin is failing at <ID:0/003> SetupConnection..
Some other stuff I tried:
Using heimdall on linux, but I get "ERROR: Failed to send handshake!" I'll try it again on another linux distro
Flashing different firmware versions, all for G950U sprint, flashing TWRP...
Using Samsung Smart Switch and Kies v3 (both report unsupported device) and Kies v2 (it gets stuck on "connecting", until it eventually reports that the device is not responding)
Some other error messages I'm getting with odin, seemingly depending on what button combination I'm pressing and whether I unplug replug the usb before flashing:
<ID:0/008> Complete(Write) operation failed.
...
<ID:0/005> Can't open the serial(COM) port.
I think I'm running out of options. Does anyone have any more ideas?
Is that the latest firmware? Try restarting your PC and use the latest odin. I realised heimdall doesn't work so I used vmware to run windows with latest odin and last firmware file and it worked. I was using the exynos version though. I had downloaded the stock rom from xda but that won't flash and checked sammobile for latest firmware, that one worked fine !
ItsmYarD said:
Is that the latest firmware? Try restarting your PC and use the latest odin. I realised heimdall doesn't work so I used vmware to run windows with latest odin and last firmware file and it worked. I was using the exynos version though. I had downloaded the stock rom from xda but that won't flash and checked sammobile for latest firmware, that one worked fine !
Click to expand...
Click to collapse
I believe it's the latest firmware for sprint. I've restarted my PC, and odin's version is 3.13.1 (which I believe is the latest). I'm currently trying a different, earlier firmware just in case that works.
I literally had the same error, I don't quite remember what I did but it was a frustrating two days of trial and error when I got this phone two weeks back, afaik it was just a wrong firmware file so give that old firmware a try
ItsmYarD said:
I literally had the same error, I don't quite remember what I did but it was a frustrating two days of trial and error when I got this phone two weeks back, afaik it was just a wrong firmware file so give that old firmware a try
Click to expand...
Click to collapse
Will do. Do you know if anyone other than Sammobile hosts them? They limit upload speed so it takes four hours between each attempt
edit: https://updato.com workds pretty well
pokoo2 said:
1. Boot into download mode screen by pressing power button + volume down + Bixby button.
2. Press volume down to restart phone.
3. Quickly press the power + volume down + Bixby button and go back into download mode .
4. Press continue 5. Congratulations full working now. Try firmware flash and it should wok.
Click to expand...
Click to collapse
Thank you so much!! That saved my life!!!!!

SM-G935T bootlop after succesful flash with odin

Hi guys, I tried to factory reset my phone by flashing the latest firmware. These are the files that I used:
AP_G935TUVSBCTA2_CL14365146_QB28658134_REV02_user_low_ship_MULTI_CERT_meta.tar.md5
BL_G935TUVSBCTA2_CL14365146_QB28658134_REV02_user_low_ship_MULTI_CERT.tar.md5
CP_G935TUVSBCTA2_CP14916856_CL14365146_QB28658134_REV02_user_low_ship_MULTI_CERT.tar
CSC_TMB_G935TTMBBCTA2_CL14365146_QB28658134_REV02_user_low_ship_MULTI_CERT.tar.md5
HOME_CSC_TMB_G935TTMBBCTA2_CL14365146_QB28658134_REV02_user_low_ship_MULTI_CERT.tar.md5
I am a noob and I accidentally flashed the HOME_CSC file in the USERDATA section but every other file was in its place. Then after the successful flash, the phone restarted and entered a boot loop with the galaxy s7 and t-mobile logo. Also, I could't boot into recovery. It shows " recovery booting..." and stays there. After that, I tried to flash several different firmware versions but I always get errors like "fw ver check failed" and stops flashing. I only managed to reflash the first firmware again with success but the phone still doesn't boot. Does anyone know what is causing the problem? Am I using wrong firmware? can anyone help on this?
regards
bassist82 said:
Hi guys, I tried to factory reset my phone by flashing the latest firmware. These are the files that I used:
AP_G935TUVSBCTA2_CL14365146_QB28658134_REV02_user_low_ship_MULTI_CERT_meta.tar.md5
BL_G935TUVSBCTA2_CL14365146_QB28658134_REV02_user_low_ship_MULTI_CERT.tar.md5
CP_G935TUVSBCTA2_CP14916856_CL14365146_QB28658134_REV02_user_low_ship_MULTI_CERT.tar
CSC_TMB_G935TTMBBCTA2_CL14365146_QB28658134_REV02_user_low_ship_MULTI_CERT.tar.md5
HOME_CSC_TMB_G935TTMBBCTA2_CL14365146_QB28658134_REV02_user_low_ship_MULTI_CERT.tar.md5
I am a noob and I accidentally flashed the HOME_CSC file in the USERDATA section but every other file was in its place. Then after the successful flash, the phone restarted and entered a boot loop with the galaxy s7 and t-mobile logo. Also, I could't boot into recovery. It shows " recovery booting..." and stays there. After that, I tried to flash several different firmware versions but I always get errors like "fw ver check failed" and stops flashing. I only managed to reflash the first firmware again with success but the phone still doesn't boot. Does anyone know what is causing the problem? Am I using wrong firmware? can anyone help on this?
regards
Click to expand...
Click to collapse
What country are you in?
cooltt said:
What country are you in?
Click to expand...
Click to collapse
USA
bassist82 said:
USA
Click to expand...
Click to collapse
Oops! Very temperamental phone, the bootloader is locked.
You can only flash the same firmware that was on the device before you started but if not the latest G935T firmware should work.
p. s. Factory reset is an option in the settings menu, there's no need to flash new firmware.
cooltt said:
Oops! Very temperamental phone, the bootloader is locked.
You can only flash the same firmware that was on the device before you started but if not the latest G935T firmware should work.
p. s. Factory reset is an option in the settings menu, there's no need to flash new firmware.
Click to expand...
Click to collapse
I don't know what firmware the phone had installed before. What are my options now? I can't get into recovery menu, only download menu works. Tried already a bunch of different android 8.0 ROMs for g935t but Odin fails to install them. It only works with just one but it goes into boot loop.
bassist82 said:
I don't know what firmware the phone had installed before. What are my options now? I can't get into recovery menu, only download menu works. Tried already a bunch of different android 8.0 ROMs for g935t but Odin fails to install them. It only works with just one but it goes into boot loop.
Click to expand...
Click to collapse
If the phone is a T Mobile device you just need to install a T Mobile firmware from sammobile.
This is the latest for your device (and I'm assuming it is a G935 edge?)....
https://www.sammobile.com/samsung/g...e/SM-G935T/TMB/download/G935TUVSACSI1/297176/
Sammobile is a little slow for non premium members
cooltt said:
If the phone is a T Mobile device you just need to install a T Mobile firmware from sammobile.
This is the latest for your device (and I'm assuming it is a G935 edge?)....
https://www.sammobile.com/samsung/g...e/SM-G935T/TMB/download/G935TUVSACSI1/297176/
Sammobile is a little slow for non premium members
Click to expand...
Click to collapse
I already tried to flash this rom, I downloaded it from a faster source and fails to flash it.
<ID:0/007> Odin engine v(ID:3.1303)..
<ID:0/007> File analysis..
<ID:0/007> Total Binary size: 4575 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> emmc_appsboot.mbn
<ID:0/007> lksecapp.mbn
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
bassist82 said:
I already tried to flash this rom, I downloaded from a faster source and fails to flash it.
<ID:0/007> Odin engine v(ID:3.1303)..
<ID:0/007> File analysis..
<ID:0/007> Total Binary size: 4575 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> emmc_appsboot.mbn
<ID:0/007> lksecapp.mbn
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/007> Removed!!
Click to expand...
Click to collapse
Fail (auth) means your phone is not in download mode or the firmware file is not in the correct box in Odin.
I think you may be better reading a step by step guide on how to flash firmware.
If you manage to flash and get stuck in a bootloop do the following.
1. No matter what the phone is doing just press volume down+home+power (in that sequence)
2. When the screen goes black quickly move your finger to volume up while still pressing home + power. This will boot you into recovery menu.
3. Choose "wipe cache partition" then "reboot system now"
4. Allow phone to go through the first boot up, it could take 10 minutes just leave it until you get the welcome screen.
cooltt said:
Fail (auth) means your phone is not in download mode or the firmware file is not in the correct box in Odin.
I think you may be better reading a step by step guide on how to flash firmware.
If you manage to flash and get stuck in a bootloop do the following.
1. No matter what the phone is doing just press volume down+home+power (in that sequence)
2. When the screen goes black quickly move your finger to volume up while still pressing home + power. This will boot you into recovery menu.
3. Choose "wipe cache partition" then "reboot system now"
4. Allow phone to go through the first boot up, it could take 10 minutes just leave it until you get the welcome screen.
Click to expand...
Click to collapse
When I press volume down+home+power it gets me to a screen says "warning: a custom o/s can cause critical problems bla bla bla..." and underneath it shows these options: 1) Volume up: continue 2) Volume Down: Cancel (restart phone) 3) Home Button: Show Barcode. If I proceed with the 1st option it goes to download mode where I flash with odin. I tried also the combination volume up+home+power with the phone witched off and it shows the message "recovery booting..." on screen with blue text but then it shows the android icon and says" installing system update, then restarts and falls into boot loop again with the samsung logo.
bassist82 said:
When I press volume down+home+power it gets me to a screen says "warning: a custom o/s can cause critical problems bla bla bla..." and underneath it shows these options: 1) Volume up: continue 2) Volume Down: Cancel (restart phone) 3) Home Button: Show Barcode. If I proceed with the 1st option it goes to download mode where I flash with odin. I tried also the combination volume up+home+power with the phone witched off and it shows the message "recovery booting..." on screen with blue text but then it shows the android icon and says" installing system update, then restarts and falls into boot loop again with the samsung logo.
Click to expand...
Click to collapse
Yes that's fine, just keep trying to get it into recovery, it can take a few attempts for recovery to boot successfully.
The locked bootloader models are a nightmare unfortunately but there's lots of info on the forum about all the different issues and how to resolve.
Sometimes the only solution is to try flash the firmware which was there before you did anything to it eventhough there is a newer version.
cooltt said:
Yes that's fine, just keep trying to get it into recovery, it can take a few attempts for recovery to boot successfully.
The locked bootloader models are a nightmare unfortunately but there's lots of info on the forum about all the different issues and how to resolve.
Sometimes the only solution is to try flash the firmware which was there before you did anything to it eventhough there is a newer version.
Click to expand...
Click to collapse
I tried a lot of times already but it finally gets to a point that says "no command" with the android icon on top and if I press some times the volume up/down or home it finally gives some error messages and stuck there. It seems to me that the recovery menu is missing completely for some reason and the second problem is I don't remember which firmware version it had exactly before my attempt to flash another.
Anyone? Do I need a pit file to fix this problem?

Categories

Resources