This thread has been created for Questions & Answers, Help & Troubleshooting
Specific to:RamROM_N7 - Note 7 full port
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
This is the place for Q&A, general discussions, and pre-/post-installation chat about RamROM_N7 - Note 7 full port. You can post here all your personal issues that are not related to the development such as Xposed, Govtuner, themes, extra mods, other stuff, ... etc. Thanks in advance!
Before posting, please use the forum search and read through the discussion thread for RamROM_N7 - Note 7 full port. If you can't find an answer, post it here, being sure to give as much information as possible (910 Variant, firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Post #2 - Most commons Q&A (current and older releases)
Post #3 - Bugs/Problems (current and older releases)
Post #5 - "How To" Guides
XDA:DevDB Information
[Q&A] [ROM][6.0.1][910 G/F/T/...] RamROM_N7 - Note 7 full port, ROM for the Samsung Galaxy Note 4
Contributors
Chimbat, Ram121, Strider72
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Current Stable Version: V1
Stable Release Date: 2017-01-09
Created 2017-01-11
Last Updated 2017-01-14
Most commons Q&A
RamROM N7_V1
Q: Can i install this Rom on my 910 XYZ Variant ?
A: The ROM default Kernel is Ramkernel for N910G, for other models install respective kernel and data fix, I recommend RamKernel
Q: How can i install this Rom on my 910T Variant ?
A: There is an installation guide specific for 910T users provided by @Jayster0966 here : https://forum.xda-developers.com/showpost.php?p=70529180&postcount=114
Q: How To Fix Data On Unlocked Sprint Model (N910P) Without Flashing A Zip File ?
A: There is an installation guide specific for Unlocked Sprint Model (N910P) users provided by @Graamsence here : https://forum.xda-developers.com/showpost.php?p=70591070&postcount=74
Q: I couldn't install apps from play store.
A: Wait for play services/play store to update.
Q: Root is not working, why?
A: Root is working fine. After flashing the Kernel just flash an Su zip (Super Su or another one).
Q: Camera n7 has only Auto mode?
A: Camera pro mode is also available if you just delete in /system/priv-app the "ShootingModeProvider" file and restart the phone.
Q: I'm having problem to see my pictures in the gallery, how to solve it?
A: There are two ways to solve this problem, at least until the dev posts the new version:
1. The ''Safe" way by : downloading a different version and manually installed it (make a backup of the file before and then just replace it manually..)
2. The ''Easy'' way by : flashing the fix mentioned here https://forum.xda-developers.com/showpost.php?p=70530079&postcount=32
Q:Soundalive is not working, how to solve it?
A:It can be solved by replacing SoundAlive_40.apk in system/ priv-app with a different version.
Also for Adapt_Sound, the Hearingdro_52.apk need to replaced.
The right permissions must be set.
*Alternatively, you can install Viper or Aryamod on a permissive kernel instead of using Soundalive -link-*
(Thanks to @callumbr1 & @Graamsence & @Benny Bosser )
Q:Torch light is not switching off from the control panel button
A: To turn off torch light use quick tools from edge panel. It's a "feature!" would have say steve Jobs
Q: How to enable Manual call recordings?
A: You can follow the instructions of the following post from @Strider72 : https://forum.xda-developers.com/showpost.php?p=70545588&postcount=55
Q: Do you have multiple fonts in this ROM?
A: YES!
Q: Can i install Xposed on RamROM N7?
A: Yes, you can flash Xposed v87.1 by wanam and install Xposed installer 3.0_Alpha4.apk
But remember : Don't report any bugs in the main dev thread if you are running Xposed on your device
Q: Who is hidden behind this RAM ROM TEAM?
A: There is no RamROM team only Ram, that's why the name is ROM of Ram that is RamROM
Bugs/Problems (N7_V1 release)
@Ram121 and all RamROM N7_V1 users
Check out the RamROM V2 work in progress here!
List of the problems/bugs that users encountered with the last Rom release (N7 V1) on Dev & QA Threads :
(List does not include the bugs which are already stated in the OP)
Not working :
SoundAlive (Can be solved : read post #2)
wifi hotspot ( Reported by 910F users )
Snapchat (910F on permissive kernel)
Working but with bug(s) :
videos on youtube are very laggy if playing above 1080p.
problems with gallery not showing some pictures. (Can be solve Temporarily by clearing the cache of the app - You can also read post #2 for other solutions)
Launcher has a small glitch when you scroll right (When you are at the right end of your launcher pages) and another small visual glitch when you scroll toward left.
Missing Features / Features Requests / Whishes list:
Auto/Manual call recording
Skipping music tracks by volume keys.
Setting-sound -> vibration->vibration feedback
Multiwindow apps
Rom Control feature
Slovakia / Czech / Turkish languages
Selection of bloatware/software to install while flashing the Rom in Aroma installer
Private Mode
Volte
3minit or equivalent clock
-------------------------------------------------------------------------------------------------------------------------------
If i missed some bugs or requests, you tell me and i will add it to the list.
It will be probably great to grab some logs to help the Dev to solve some of the issues.
Doesn't this thread belongs in general section?
How to guides
"HOW TO" GUIDES (Specific for RamROM N7) :
How to install the RamROM N7 on a 910T Device by @Jayster0966
https://forum.xda-developers.com/showpost.php?p=70529180&postcount=114
How To Fix Data On Unlocked Sprint Model (N910P) Without Flashing A Zip File by @Graamsence
https://forum.xda-developers.com/showpost.php?p=70591070&postcount=74
How to install Viper on RamROM N7 (by @callumbr1 & by @Graamsence )
Viper4Android v2.5.0.5 https://forum.xda-developers.com/showpost.php?p=70579010&postcount=70
Viper4Android V2.4.0.1_neon+convolvers https://forum.xda-developers.com/showpost.php?p=70575084&postcount=66
How to install Aryamod sound control on RamROM N7 by @Benny Bosser
https://forum.xda-developers.com/showpost.php?p=70592822&postcount=80
"HOW TO" GUIDES (GENERAL) :
How to flash Modem and Bootloader for Snapdragon Note4 by @Battlehero
https://forum.xda-developers.com/showthread.php?t=3273816
Modem & Bootloader for 910F Devices by @alexndr - Thanks to @Strider72-
https://www.androidfilehost.com/?w=files&flid=26335
How to solve wrong battery calibration by @Trex888
https://forum.xda-developers.com/showthread.php?t=3513268
PS: All fine! A great XDA moderator has moved the thread in it's right place : Galaxy Note 4 Q&A, Help & Troubleshooting
RamKernel for N910G/F/T/P/V/W8 that why i am N9100 dual sim not working/
hochocnua said:
RamKernel for N910G/F/T/P/V/W8 that why i am N9100 dual sim not working/
Click to expand...
Click to collapse
The answer is there :
Q: Can i install this Rom on my 910 XYZ Variant :
A: The ROM default Kernel is Ramkernel for N910G, for other models install respective kernel and data fix, I recommend RamKernel
Click to expand...
Click to collapse
You have a N9100 Dual sim not a SM-910G/F/T/P/V/W8
So you can try to install it with a N9100 Dual Sim Kernel and a data Fix + Super SU. If it's working on your device, you will be lucky and if not, you can't complain mate
because it's written nowhere that this Rom is compatible with your device. Have you ever try to flash an Exynos rom on your Device?:silly:
Chimbat said:
The answer is there :
You have a N9100 Dual sim not a SM-910G/F/T/P/V/W8
So you can try to install it with a N9100 Dual Sim Kernel and a data Fix + Super SU. If it's working on your device, you will be lucky and if not, you can't complain mate
because it's written nowhere that this Rom is compatible with your device. Have you ever try to flash an Exynos rom on your Device?:silly:
Click to expand...
Click to collapse
i see, i just love this rom and try to say something with someone have a N9100 like me. I am ok with Govtuner and Root package diable app. See you next time.
hochocnua said:
i see, i just love this rom and try to say something with someone have a N9100 like me. I am ok with Govtuner and Root package diable app. See you next time.
Click to expand...
Click to collapse
Ok mate, no worries and good luck in your quest!
using 910G / RamRom N7_V1 / Kernel v5 enforcing / Govtuner 3.8
Anyone know if snapchat works with this ROM. Mine currently isn't. Is there a fix or is it down to safety net?
callumbr1 said:
Anyone know if snapchat works with this ROM. Mine currently isn't. Is there a fix or is it down to safety net?
Click to expand...
Click to collapse
I can see by the number of your posts that you are an experienced user and i'm not using Snapshot as i already told you in the other thread but i'll try to help anyway (So don't see any offense in my questions):
1/ Did you flash clean the rom ?
2/ Did you restore your snapchat from Titatnium backup or you did do a fresh install?
3/ What variant of 910 are you on?
4/ What Ram kernel version are you using right now ? Permissive/Enforcing?
Chimbat said:
I can see by the number of your posts that you are an experienced user and i'm not using Snapshot as i already told you in the other thread but i'll try to help anyway (So don't see any offense in my questions):
1/ Did you flash clean the rom ?
2/ Did you restore your snapchat from Titatnium backup or you did do a fresh install?
3/ What variant of 910 are you on?
4/ What Ram kernel version are you using right now ? Permissive/Enforcing?
Click to expand...
Click to collapse
Its okay... my first few weeks with my note 4 and had nothing but trouble so far haha, but looks like things are sorted.
1- yes i did full wipe and clean flash. Wiped system, data, cache, dalvik, storage
2- no restore of snapchat. Fresh install from play store.
3- N910F
4- Ramkernel v5 permissive.
Before today i had stock rooted rom with ram kernel v4 and all was fine.
I have heard before when i had a note 7 rom for my s6 edge that snapchat also uses safety net like pokemon go which can prevent it from working. Not sure if this is correct.
Thanks for your help
Hello,
Seems all these N7 ports have huge battery drains. Tried many and this rom is no exception.
Anyways this is a very stable rom, grt work.
Thanks
Sent from my SM-N920F using XDA-Developers Legacy app
callumbr1 said:
Its okay... my first few weeks with my note 4 and had nothing but trouble so far haha, but looks like things are sorted.
1- yes i did full wipe and clean flash. Wiped system, data, cache, dalvik, storage
2- no restore of snapchat. Fresh install from play store.
3- N910F
4- Ramkernel v5 permissive.
Before today i had stock rooted rom with ram kernel v4 and all was fine.
I have heard before when i had a note 7 rom for my s6 edge that snapchat also uses safety net like pokemon go which can prevent it from working. Not sure if this is correct.
Thanks for your help
Click to expand...
Click to collapse
Hi mate! Sorry for the delay of my answer, i had a weird problem with XDA forum (Couldn't see the recents posts and i gave up after sometimes).
-Your problem might be related to the kernel, you may try to flash the Kernel V5 Enforcing for 910F Wihtout SuperSu 1st and see if Snapchat works
-Then you can try to flash Supersu and see if it still work despite of the root.
https://forum.xda-developers.com/note-4/orig-development/kernel-ramkernel-t3472138
I'm running Ram Kernel V5 Enforcing for 910G without any extra troubles.
hi_blues said:
Hello,
Seems all these N7 ports have huge battery drains. Tried many and this rom is no exception.
Anyways this is a very stable rom, grt work.
Thanks
Sent from my SM-N920F using XDA-Developers Legacy app
Click to expand...
Click to collapse
At the first boot of the 1st install of a new rom it's normal that the battery drains more i think.
I had around 16H battery with 100% on my first install of the rom with Govtuner 3.9.1 (Set on battery mode)
Now i have used 83% of my battery in almost 20H with Govtuner 3.8 (Set on battery mode). Which is better. I'll post some screenshot soon.
I attached some screenshots of GSAM & Kernel Audiutor
Edit: Waow! I could see recent changes in the dev's github and we can see that Synapse support is coming. Great!
Chimbat said:
Hi mate! Sorry for the delay of my answer, i had a weird problem with XDA forum (Couldn't see the recents posts and i gave up after sometimes).
-Your problem might be related to the kernel, you may try to flash the Kernel V5 Enforcing for 910F Wihtout SuperSu 1st and see if Snapchat works
-Then you can try to flash Supersu and see if it still work despite of the root.
https://forum.xda-developers.com/note-4/orig-development/kernel-ramkernel-t3472138
I'm running Ram Kernel V5 Enforcing for 910G without any extra troubles.
Click to expand...
Click to collapse
Its just strange because before i flashed the ROM i had ram kernel v4 permissive and root. I like to keep permissive kernel because i use viper.
callumbr1 said:
Its just strange because before i flashed the ROM i had ram kernel v4 permissive and root. I like to keep permissive kernel because i use viper.
Click to expand...
Click to collapse
Ok mate no worries it was just a suggestion. What Rom was you running with ram kernel v4 and snap chat was working ?
using 910G / RamRom N7_V1 / Kernel v5 enforcing / Govtuner 3.8
Chimbat said:
Ok mate no worries it was just a suggestion. What Rom was you running with ram kernel v4 and snap chat was working ?
using 910G / RamRom N7_V1 / Kernel v5 enforcing / Govtuner 3.8
Click to expand...
Click to collapse
No problem, it was just stock ROM, rooted with ram kernel v4. I think ill keep it as it is i would much rather have the ROM than snapchat to be honest
Xposed v87.1
Xposed by wanam V87.1 is working fine with RamROM_N7 V1 :
https://forum.xda-developers.com/xp...ds-cse&usg=AFQjCNHeZbdRr-zu9egpAEFJCuvTfcnt6Q
P.S : You need to disable/enable download in the Xposed settings to get download work.
But remember : DO NOT report any bugs in the main dev thread if you are running Xposed on your device!
wifi hotspot not working. I tried everything ex. like changing boolader and modem. Unfortunately. My device is N910F. But it is working on reddragon, nemesis, norma roms.
Related
Hi! This is an index and guide about the Samsung Galaxy S4 mini plus i9195i
Rooting guide:
I downloaded Kingroot and rooted it there (even though it said not supported, it still worked). I then downloaded Super me and let it do it's magic (delete Kingroot apps and install SuperSU apps). It takes about 10 minutes. After 10 minutes, you can get your refund from the Play Store.
Xposed guide:
I downloaded the Xposed installer, went to install/update, and it all went smoothly for me. Other users reported boot loop, but my phone was fine, so don't blame me if you get boot loop.
Custom Roms:
KitKat ROMS:
CyanogenMod 11
Lollipop ROMS:
CyanogenMod 12.1
Marshmallow ROMS:
CyanogenMod 13
Nougat ROMS:
LineageOS 14.1
Oreo ROMS:
LineageOS 15.1
dotOS 2.4
Resurrection Remix 6.0.0
Pie ROMS:
LineageOS 16
Pixel Experience
Credits to @Danil_e71 for the development on our device
As far as my testing went, all these ROM's are pretty stable and that includes LOS 16. This device is not my primary device though, so I don't test as well as I used to. LOS 16 doesn't seem to have any major bugs. (I didn't even find minor bugs either, but again, I don't test properly.). You need the latest TWRP to flash it though.
Custom Kernels:
Custom kernel by alexax66 for stock ROM 4.4
.zip file (v 0.1.7)(Flash via recovery)
.tar file(v 0.1.7)(Flash via odin)
(v 0.1.7) Disc image file
Source
It works well, normal features work and it seems to make the phone work faster. I found that all kernel features do work, while there are a few bugs (I've come across 2: the alarm clock doesn't work and I can't search for mobile networks/ put new apns in). To make sweep2sleep work, you must insert
Code:
su
echo 1 > /sys/sweep2sleep/sweep2sleep
into the terminal after adding code to the build prop (this worked for me, but after a reboot it stopped). I installed first via TWRP official and then via Odin. I'm not sure if you have to do it that way, but I can assure you that if you do do it that way, it will work.
I would not recommend this kernel, due to its instability, although I did used to use it daily.
Custom kernel for stock ROM 4.4 by Danil_e71
https://forum.xda-developers.com/attachment.php?attachmentid=3778847&d=1465586157
I could not get WiFi working on this kernel.
Custom kernel for CM 11 by Danil_e71
https://forum.xda-developers.com/attachment.php?attachmentid=3778501&d=1465562842
Overclocks to 1.4 Ghz, and works well.
Custom Recoveries:
I am only listing the most recent versions:
CWM
flash via recovery (v 6.0.5.1) by @alexax66
flash via odin (v 6.0.5.1) by @alexax66
Disc image file (v 6.0.5.1) by @alexax66
Philz
flash via odin (v 6.59.0) by @alexax66
flash via recovery (v 6.59.0) by @alexax66
Source
TWRP
flash via recovery (v 3.1.0-0) by @Danil_e71
Stock ROM:
Here
Stock Kernel:
Latest stock kernel (Disc image file)
Stock Recovery:
Stock recovery (Disc image file)
Anyone else tryed this metod and can confirm that them devices is rooted ?
Zakariasz said:
Anyone else tryed this metod and can confirm that them devices is rooted ?
Click to expand...
Click to collapse
yeah I just rooted my device by installing the linked KingRoot apk. It failed the first try but I tried a second time and now it works
I don't have custom recovery, nor kernel nor Xposed framework yet though.
Stagefright-Official Rom
Hello,
just to say that I upgrade (odin flash) to last Official rom yesterday, find on sammobile:
Model GT-I9195I
Model name GALAXY S4 mini LTE
Country Netherlands
Version Android 4.4.4
Changelist 5332500
Build date Mon, 11 Jan 2016 11:42:16 +0000
Product code PHN
PDA I9195IXXU1APA1
CSC I9195IPHN1APA1
good news : all Stagefright detector are green !
exzemat said:
good news : all Stagefright detector are green !
Click to expand...
Click to collapse
What is Stagefright?
LoScienzo said:
What is Stagefright?
Click to expand...
Click to collapse
wikipêdia:
Stagefright is the collective name for a group of software bugs (or more specifically backdoors), that affect versions 2.2 ("Froyo") and newer of the Android operating system, allowing an attacker to perform arbitrary operations on the victim device through remote code execution and privilege escalation.[1] Security researchers demonstrate the bugs with a proof of concept that sends specially crafted MMS messages to the victim device and in most cases requires no end-user actions upon message reception to succeed, while using the phone number as the only target information.[2][3][4][5]
Sorry, but I have a stupid question:
Can I use the Netherlands-version also on devices that are used in other countries / with other carriers?
Bibabuzzel said:
Sorry, but I have a stupid question:
Can I use the Netherlands-version also on devices that are used in other countries / with other carriers?
Click to expand...
Click to collapse
Yes, you can, but I think if you wait, your country might come. They just (50 minutes ago) released one for region TPD here. I think I'm going to wait.
I use method described in the first post but with Super Sume v 9.1.9 and xposed installer from the first post and everything work like charm for the moment.
I've done it via same route, it was bit of a hassle for trying to find information about this exact phone. Nice compilation here. Thumbs up.
exzemat said:
Hello,
just to say that I upgrade (odin flash) to last Official rom yesterday, find on sammobile:
Model GT-I9195I
Model name GALAXY S4 mini LTE
Country Netherlands
Version Android 4.4.4
Changelist 5332500
Build date Mon, 11 Jan 2016 11:42:16 +0000
Product code PHN
PDA I9195IXXU1APA1
CSC I9195IPHN1APA1
good news : all Stagefright detector are green !
Click to expand...
Click to collapse
Are there any noticable differences in this update?
no other than more recent kernel build (11/01/2016) : more secure ...
I added a bunch of disc images of kernels and recoveries (no new releases ) I also added the newest stock kernel if anyone needs it. (Released 11 Jan 2016) Also, TWRP 3.0.0-0 is out for our device, links are there. Is anyone working on CM by the way?
Anyone flashed any of the stock firmware in the original post?
Mine came with the stock firmware from another country, and I would like to flash the one for my country to see if the cell phone signal is any better.
Should I bother?
BTW, will doing that trip the knox meter?
I tried to change Kingroot with SuperSUMe but can't do this, course can't brake Knox. I try to install SuperSU it also can't brake Knox. Wtf?
I need custom kernel without bugs for our i9195i.
I also can mention that the Rom for each country has special BB (baseband - drivers for radio module). But there is no any Rom for my country... So i have unstable signal...
---------- Post added at 05:02 PM ---------- Previous post was at 05:02 PM ----------
How to disable Knox?
There's a new official TWRP release (3.0.0-2) here , enjoy
Sent from my GT-I9195I
Update: Got a custom ROM fully working (with small bus where and there). Check the first post
DroidKing18 said:
Update: Got a custom ROM fully working (with small bus where and there). Check the first post
Click to expand...
Click to collapse
You've got a interesting thread here to stay up-to-date on info about our phone, but shouldn't you mention some credits to the guy(s) that found the cm11?
I think it's Chrisled2 talking about it on cyanogenmod-forum (i see he's active here also by the name of chrisled):
https://forum.cyanogenmod.org/topic/110203-gt-i9195i-supported/?page=2#comment-591554
There are mentions about problems with play store, and playing video files in browser.
But thanks again for keeping us up-to-date!
Could you maybe try and test the infrared-functions with the custom rom? I use it for my television and decoder.
bartiest said:
You've got a interesting thread here to stay up-to-date on info about our phone, but shouldn't you mention some credits to the guy(s) that found the cm11?
I think it's Chrisled2 talking about it on cyanogenmod-forum (i see he's active here also by the name of chrisled):
https://forum.cyanogenmod.org/topic/110203-gt-i9195i-supported/?page=2#comment-591554
There are mentions about problems with play store, and playing video files in browser.
But thanks again for keeping us up-to-date!
Could you maybe try and test the infrared-functions with the custom rom? I use it for my television and decoder.
Click to expand...
Click to collapse
I thought OyyO found it first but I wasn't sure. I would've given creds to the devs but they don't seem to be on this site, if they are, tell me, but I've only seen them on 4pda, a Russian site. The truth is that I didn't test it enough to notice all the bugs. I lost a lot of interest when I found that I couldn't put Xposed on
Sent from my GT-I9195I using XDA-Developers mobile app
Btw, there is a also TWRP 3.0.2 now so your links to the official builds are outdated - you may want to link directly to https://dl.twrp.me/serranoveltexx/
Hello Everyone
Since DEVDB is not accepting "Redmi Note 3" I am starting this thread to share all the best ROM's, Tweaks & tricks for the Helios-X10 based Hennessy
All link's & uploads will be posted in this OP once the thread is approved.
0) XIAOMI.EU 7.2.3.0 ROM (Stable & Developer) (no China apps, Rooted, Xposed, Gapps) - THIS IS THE BEST!
1) China ROM - Official (Stable & Developer) UPDATE mode (full of China apps, no Root, no Gapps)
2) China ROM - Official (Stable & Developer) - MIUI 7.1.8.0, SP Flash tools mode (full of China apps, no Root, no Gapps)
3) Global ROM - SphinX v2b ManhIT (MIUI 7.1.3.0 Stable with SwiftKey, SuperSU, GApps & no China apps)
4) Global ROM - by LoXar (MIUI 7.1.6.0 Stable with Super SU2.66, GApps, & no China apps)
5) sMIUI ROM Kitchen (needs custom Recovery - by Handam000)
6) sCM12.1 Unofficial for RN3
Hacks & Tweaks
1) Fingerprint Sensor fix by Shade5
2) Un-brick your Redmi Note 3 if SPFlashTools failed
3) Restore/Change IMEI number
Coming up...
Tweaking 2G/3G/4G band settings , Battery Tweaks , Rooting, SuperSU, GApps ,Unlocking Bootloader
Enjoy!
Shade5
This will activate the hardware of your Fingerprint sensor if you've flashed the SphinXv2b Stable_Redmi_Note3_MIUI7.1.3.0_Global_ManhIT ROM and found the Fingerprint sensor not working...
All steps are same as you did for flashing the ROM (screenshot & instructions are also in the zip folder)
First download my Fix attached here & unzip it on your desktop
1) Use SP_Flash_Tool_v5.1516.00 (not included - use the same one which you flashed your ROM with)
2) select Download Agent (DA_SWSEC.BIN) in the FLASH TOOL folder
3) find Scatter file (MT6795_Android_scatter.txt) in the IMAGES folder
However
4) Only untick SYSTEM & USERDATA ,keep the rest selected
Now flash away as normal & reboot once done....
This fix will not affect your apps/data & will immediately ask you to enter your fingerprint - only this time... IT WORKS :good:
IF for any reason you managed to "brick" your phone, just flash the stock China ROM again from the OP or follow the un-brick link for more instructions
Enjoy!
Shade5
Reserved 2
Reserved 3
Hi,
I've just tried the fingerprint solution but unfortunately it still dosn't work. What does your fix actually do? Is there anything else I can try?
Thanks
zms786 said:
Hi,
I've just tried the fingerprint solution but unfortunately it still dosn't work. What does your fix actually do? Is there anything else I can try?
Thanks
Click to expand...
Click to collapse
Hi ZMS...
Firstly just to be sure - did you SPTools flash the SphinX v2b ROM?
After that if you flash my files exactly as per the screenshot I have put in the folder, the Fingerprint sensor driver's get installed.
(BTW on my 16gb the SphinX v2b works but it didn't work on the 32GB, so I made this fix.zip)
I found this ROM was the cleanest n best hence I made this fix (rather than flashing the Chinese or LoXar rom)
Let me know how it goes for you
Hi
I followed your instructions as described and flashed with spflash tool. I will try again and also tried to reboot it but that didn't work. Is there anything else I can check?
That's strange!
Mine (3G/32G) came with SphinX V1 installed and I moved to V2b without any issue.
.I then flashed LoXar 7.1.6.0 on it with SPflashtool (following MIUI EU trend) and live with it now.
No big sensible difference between the two versions, and finger print is working best from the beginning .
Why not to try Loxar and check if issue is solved and in case it will still be present to clean the phone with a China dev version and reapply SphinX as ultimate check.
Edit:
Thanks again to you @ Shade5 for opening this thread
My rn3 bricked
Shade5 said:
This will activate the hardware of your Fingerprint sensor if you've flashed the SphinXv2b Stable_Redmi_Note3_MIUI7.1.3.0_Global_ManhIT ROM and found the Fingerprint sensor not working...
All steps are same as you did for flashing the ROM (screenshot & instructions are also in the zip folder)
First download my Fix attached here & unzip it on your desktop
1) Use SP_Flash_Tool_v5.1516.00 (not included - use the same one which you flashed your ROM with)
2) select Download Agent (DA_SWSEC.BIN) in the FLASH TOOL folder
3) find Scatter file (MT6795_Android_scatter.txt) in the IMAGES folder
However
4) Only untick SYSTEM & USERDATA ,keep the rest selected
Now flash away as normal & reboot once done....
This fix will not affect your apps/data & will immediately ask you to enter your fingerprint - only this time... IT WORKS :good:
Enjoy!
Shade5
Click to expand...
Click to collapse
i follow this just after i flashed v2b, now my RN3 wont even start, i tried to flash it again with v2b, but the sp tool keeps showing error
PLEASE HELP!!!!!!!!!!!
Shade5 said:
However
4) Only untick SYSTEM & USERDATA ,keep the rest selected
Now flash away as normal & reboot once done....
Shade5
Click to expand...
Click to collapse
It's important to untick "preloader" too ! When you don't do that, there's a risk, that your device bricks. You always have to do that when you flash non-stock things with SP-Flashtool.
Btw. What's with custom roms for the Redmi Note 3 ? They should be in your first post too...
Is the xposed useful if I install
Sent from my Redmi Note 3 using Tapatalk
if only you said that earlier
Cameo164 said:
It's important to untick "preloader" too ! When you don't do that, there's a risk, that your device bricks. You always have to do that when you flash non-stock things with SP-Flashtool.
Click to expand...
Click to collapse
man, if only you said that earlier... my RN3 now bricked, it wont turn on,.. can you give me a solution ? please..:crying:
can any body please post another link for : 4) Global ROM - by LoXar (MIUI 7.1.6.0 Stable with Super SU2.66, GApps, & no China apps)
?
Thank you.
Davidfi1 said:
can any body please post another link for : 4) Global ROM - by LoXar (MIUI 7.1.6.0 Stable with Super SU2.66, GApps, & no China apps)
?
Thank you.
Click to expand...
Click to collapse
Here you have. But what's so bad with registering at the MIUI forum so that you can download it from there?
https://mega.nz/#!jNYylDBJ!ZSmwZALOiucQgQTidEqIrjSnIXtWCu14KpTNf2wjVSY
---------- Post added at 20:14 ---------- Previous post was at 19:30 ----------
isfanl said:
man, if only you said that earlier... my RN3 now bricked, it wont turn on,.. can you give me a solution ? please..:crying:
Click to expand...
Click to collapse
Try to reflash SphinX Rom ( http://en.miui.com/thread-207019-1-1.html ) and pay attention that you untick "preloader". Good Luck. :fingers-crossed:
And when this isn't working, try this method: Use SP Tool V5.1516 for flashing the rom (Untick preloader!!). Instead holding only the Vol Down button, Hold Both Vol Down + Power button when plugging the usb cable in. The progress bar should turn yellow and the flash should be completed. Turn on the device, it will take some time, but it should work.
Cameo164 said:
Here you have. But what's so bad with registering at the MIUI forum so that you can download it from there?
https://mega.nz/#!jNYylDBJ!ZSmwZALOiucQgQTidEqIrjSnIXtWCu14KpTNf2wjVSY
Click to expand...
Click to collapse
I did register at the MIUI forum - the problem is with the mega link is not working here for some reason ....
Thank you.:good:
David.
Does anyone have RN3 like me on that picture..
elol said:
Does anyone have RN3 like me on that picture..
Click to expand...
Click to collapse
I have the 3GB RAM version but I had that MIUI version on my device when I bought it too. It's an unofficial shop version. I would switch to an official MIUI version because your version doesn't get updated. I can recommend the latest developer version 6.1.29.
Cameo164 said:
I have the 3GB RAM version but I had that MIUI version on my device when I bought it too. It's an unofficial shop version. I would switch to an official MIUI version because your version doesn't get updated. I can recommend the latest developer version 6.1.29.
Click to expand...
Click to collapse
How can I flash it?its only use update.zip on sd card or need to use pc or laptop..sory for noob question
zms786 said:
Hi
I followed your instructions as described and flashed with spflash tool. I will try again and also tried to reboot it but that didn't work. Is there anything else I can check?
Click to expand...
Click to collapse
I'd need some info before I can help you out....
1) Is your phone 16 or 32 GB?
2) What was the initial ROM version on it
3) Did you flash the CHINA stable ROM before the SphinX v2b?
lolo9393 said:
That's strange!
Mine (3G/32G) came with SphinX V1 installed and I moved to V2b without any issue.
.I then flashed LoXar 7.1.6.0 on it with SPflashtool (following MIUI EU trend) and live with it now.
No big sensible difference between the two versions, and finger print is working best from the beginning .
Why not to try Loxar and check if issue is solved and in case it will still be present to clean the phone with a China dev version and reapply SphinX as ultimate check.
Edit:
Thanks again to you @ Shade5 for opening this thread
Click to expand...
Click to collapse
Hi @lolo9393 , glad the thread is catching on
Some Redmi's are "pre-flashed" with shop-rom's that have Play store
These versions dont register the fingerprint driver's once flashed
I have both 16GB (China, Stable stock, no Play store) & 32GB(Singapore, stable ROM with Play store) RN3's
My fix only re-flashes these (which you didn't as your stock driver's were still working)
[size=+2]This ROM is no longer updated as I don't have the device anymore. Feel free to use my code from GitHub to compile newer versions.[/size]
I have created this ROM for my E210L and I would like to share it here. This is direct port of Cyanogenmod/LineageOS from i9300 to E210L/S/K.
My ROM is based on work from FullGreen: https://github.com/FullGreen and on weeks of original research.
Previous versions of my ROM was direct ports of FullGreen ROM to E210L, later version was ported from scratch from CM13 stable release ZNH5Y sources for i9300, and still had many things based on FullGreen work.
The new version is based on latest source of LineageOS for GT-I9300.
[size=+3]ROM Download[/size]
https://www.androidfilehost.com/?w=files&flid=146865 - updated at 2018-10-02.
Older releases:
https://mega.nz/#F!28xyAJTY!gQ5dsDWIz3ydJkhyHEZ1fQ
[size=+3]Flashing[/size]
It is always recommended to upgrade to latest official stock ROM before switching to LineageOS. This is because latest stock ROM includes updated modem and bootloader.
To flash the ROM, use TWRP - for E210L it is available together with the ROM. For E210S and E210K, use TWRP for I9300 from http://twrp.me.
GApps can be downloaded from http://opengapps.org/ , architecture ARM, version 7.1, variant nano.
Boeffla kernel - optional - is also available with the ROM, it can be installed from recovery if you wan't to use it.
[size=+3]WARNING!!![/size]
PLEASE BACK UP EFS BEFORE FLASHING!!! Tweaking this phone can cause EFS wipe in some cases, and you must have a backup to restore it to normal.
[size=+3]Known bugs:[/size]
- Signal strength sometimes will be shown empty, this is only cosmetic issue (but too difficult for me to fix) and don't affect real signal strength.
- As my ROM is based on official LineageOS sources, and for now there is no stable release of LineageOS, if there are bugs in official LineageOS for i9300, they will be probably present also in my ROM.
- Cell broadcasts are disabled as they seem to cause battery drain.
Please note that for most of the cases I cannot solve bugs as I'm not LineageOS developer, I'm only doing a direct port from I9300 to E210.
[size=+3]Troubleshooting[/size]
If having issues with WIFI or IMEI:
Enable developer options and ADB root access, then connect phone to computer and enter in adb shell:
Code:
su
restorecon -R -F /efs
reboot
You have to do this from normal LineageOS, NOT from recovery or from stock/another ROM.
If you restore EFS from backup or go to another ROM and return to this ROM and you have problems, do this again.
There is no harm in doing this if not sure.
If your WIFI still not working, read this:
WIFI module in Galaxy S3 can be of three different types - murata, semco and semcosh. Normally the driver should be able to detect the right type by MAC address, but in LineageOS detection not always works correctly. Theoretically this can be a problem also for the regular model GT-I9300, but it seems to affect mainly the SHV-E210 model. To overcome this, I have made an option to manually override your WIFI module type. To do this, you have to update to my latest version of the ROM and then create an empty file named wifi_override_murata or wifi_override_semco or wifi_override_semcosh in your /data partition.
To do this, enable developer options, then turn on root access for ADB, then connect phone to computer, enter adb shell and execute :
Code:
su
For murata :
rm /data/wifi_override_semco
rm /data/wifi_override_semcosh
touch /data/wifi_override_murata
For semco :
rm /data/wifi_override_semcosh
rm /data/wifi_override_murata
touch /data/wifi_override_semco
For semcosh :
rm /data/wifi_override_murata
rm /data/wifi_override_semco
touch /data/wifi_override_semcosh
Then reboot the phone and try again using WIFI. You have try each of the three options to determine which option is right for your device. And if you hard reset your device, you will have to do this again.
In voice call, if the other person hears an echo of himself try to change AudioFX settings or disable AudioFX in the app.
[size=+3]Source code:[/size]
https://github.com/kmmng/cm14_c1
[size=+3]Thanks to:[/size]
The G-O-D for everything! ,
CyanogenMOD and LineageOS teams for the OS,
FullGreen for the ROM and the kernel,
TWRP for custom recovery,
osm0sis for Android Image Kitchen,
xpirt for sdat2img and rimg2sdat,
Lord Boeffla for his kernel and Anykernel scripts,
and everyone else I have used their work.
Runs great so far!
Nice job on making this work on this device, a fix for the battery drain issue would be perfect. I sadly do not have knowledge of this else i would be able to assist. Keep it up!
Perfect!!
Good job, the battery drain is high but the rom is fantastic, thanks for this
uhmm Where to get the Shv e210k version of this rom all i see is for L and S plss help
Nigellross said:
uhmm Where to get the Shv e210k version of this rom all i see is for L and S plss help
Click to expand...
Click to collapse
Try to use e210s version, s and k models are very similar.
Ve tried to use the s version on my shv e210k but im stuck at samsung galaxy logo ... is therw any fix
HUDASnotcare said:
Ve tried to use the s version on my shv e210k but im stuck at samsung galaxy logo ... is therw any fix
Click to expand...
Click to collapse
Try to flash this kernel after flashing S version. I cannot test it as I don't have the device, but I hope it will work.
No wifi
kmmng said:
Try to flash this kernel after flashing S version. I cannot test it as I don't have the device, but I hope it will work.
Click to expand...
Click to collapse
Its working thanks but now Unable to connect o my wifi help
HUDASnotcare said:
Its working thanks but now Unable to connect o my wifi help
Click to expand...
Click to collapse
Try this, I don't sure this will work as I don't have this device so i don't sure which wifi module it have.
GApps
Thanks men it works but i cannot install any gapps and getting an error google play frameworks not stopped
---------- Post added at 10:26 PM ---------- Previous post was at 10:25 PM ----------
kmmng said:
Try this, I don't sure this will work as I don't have this device so i don't sure which wifi module it have.
Click to expand...
Click to collapse
Thanks it work great but now experiencing gapps not working need help... also notifs led is not working ... sorry for the trouble
HUDASnotcare said:
Thanks it work great but now experiencing gapps not working need help... also notifs led is not working ... sorry for the trouble
Click to expand...
Click to collapse
Try to use E210S version from 2016-03-16 and not the last one.
Also try to install in this order : first erase data from recovery, then install rom, then install gapps, then install kernel - all this without rebooting. Only when everything is installed you can reboot.
Mine problem is losing signal after typing long message pls help guys, im using e210l and Boeffla kernel. thanks.
ROM updated to new version, https://mega.nz/#!6kJWFYSD!vDn3YI5-bgHOIsQvrblLaIRPrK5YEtQ3xlDSbApCdUI
Thank you soo much for this rom
đa
update plz
meeeeeooo said:
Mine problem is losing signal after typing long message pls help guys, im using e210l and Boeffla kernel. thanks.
Click to expand...
Click to collapse
same here, but i tested many roms 6.0, imo bug after port
shv e210k
wifi connection failure
Updated to new version
Thanks for the ROM, but the boeffla kernel in this versión Don't work, is stuck in cyanogen logo.
My device is SHV E210L
Rom : Blekota Note 4 Lite Rom 4.4.4
How to flash this rom?
[SIZE=+7]Asus Zenfone 5[/SIZE]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This thread aims at better understanding of few basics topics so as to ease up the problems faced by new user on zenfone 5 thread.This thread only supports zenfone 5 (t00f/t00j).NO SUPPORT WILL EVER BE GIVEN TO ZENFONE 6/ZENFONE 4/ZENFONE 5 LTE/ZENFONE GO OR OTHERS .Read the topics and dont be a NOOB anymore .
NOUGAT ROMS
ARE NOUGAT ROMS AVAILABLE FOR ZENFONE 5?
YES ,Roms like resurrection remix,lineage os,aicp, aokp, xosp, cypher os,aosp extended, oct-os,mokee,slim rom .
THE ROM MADE FOR T00F WORKS IN T00J ?
YES, no problem at all . whatever works in T00F WORKS IN T00J.
DOES FM RADIO WORKS ?
NO. IT DOESNOT WORK ON ANY CUSTOM ROM.You can use internet radio
DOES GPS WORKS?
NO. IT DOESNOT WORK ON ANY CUSTOM ROM. BUT A-GPS WORKS PERFECTLY.
CAN I INSTALL XPOSED FRAMEWORK ?
YES, IT'S AVAILABLE BUT IT'S STILL UNDER DEVELOPMENT PROCESS WHICH MEANS IT WILL NOT WORK PERFECTLY AND WILL GIVE YOU UNSTABLE BUGS. XPOSED IS YET NOT RELEASED BY THE OFFICIAL SOURCE. YOU CAN USE THE XPOSED BY UNOFFICIAL SOURCE.*USE AT YOUR OWN RISK.
CAN I USE MAGISK ON MY ZENFONE 5?
YES, MAGISK HAS PARTIAL SUPPORT FOR NOW.FOR MORE INFORMATION VISIT THE THREAD https://forum.xda-developers.com/zenfone-5/development/magisk-magisk-v12-0-installer-t3608257
CAN I USE STOCK KERNEL ?
NO.
ARE THERE ANY ROMS THAT CAN BE USED ON LOCKED BOOTLOADER?
NO
WILL ZENFONE 5 WILL BE UPDATED TO ANDROID O?
CANNOT SAY ANYTHING ,STOP ASKING THAT.
I CANNOT FIND THE ROOT ADDON
-CLICK HERE-
WHICH ROM IS STABLE FOR DAILY USE?
EVERY NOUGAT ROM AVAILABLE WHICH HAS ITS STATUS : STABLE
CAN I USE ANY SOUND MOD FOR ZENFONE 5?
YES, VIPER4ANDROID WORKS FLAWLESSLY. FOR MORE INFORMATION VISIT THE THREAD -CLICK HERE-
CANNOT USE GOOGLE ASSISTANT/NOW ON TAP FROM ANY SCREEN .HOW TO FIX ?
MAKE SURE GOOGLE APP IS YOUR SYSTEM APP. ELSE MOVE GOOGLE APP TO SYSTEM/PRIV-APP AND GIVE PERMISSION AS R-W-R-R . REBOOT
WHICH GAPPS TO USE ? OPENGAPPS /BEAN GAPPS ?
OPENGAPPS IS PREFERRED IN MOST OF THE ROMS
WHAT ARCHITECTURE AND VERSION OF GAPPS TO CHOOSE FOR ZENFONE 5?
X86 ARCHITECTURE. PICO/NANO VERSION ONLY
CAN I USE SUBSTRATUM ON ANY ROM ?
SUBSTRATUM CAN BE USED ON ROM THAT HAS OMS COMMITS .THE EASIEST WAY TO FIND OUT IS NAVIGATE TO SETTINGS> APPS> SYSTEM APPS AND SEARCH FOR ¨THEME INTERFACER¨ . IF THAT IS PRESENT THEN YOU CAN USE SUBSTRATUM.
CAN I USE CM THEMES ON LINEAGE OS ?
NO.
WHICH MODS /APPS SHOULD I USE FOR BETTER BATTERY BACKUP?
MODS/APPS AVAILABLE LIKE GOVTUNER, LSPEED, SERVICELY, GREENIFY
CAN I USE GREENIFY WITHOUT XPOSED ?
YES. THE ROOT+PRIVILEGED MODE WORKS WELL.
HOW CAN I USE PRIVILEGED MODE IN GREENIFY I AM JUST A ROOTED USER?
MAKE GREENIFY A SYSTEM APP.
PROXIMITY SENSOR IS ALWAYS ON . ANY WORKAROUND?
GET LATEST GOOGLE DIALER, MAKE IT YOUR DEFAULT PHONE APP. ENABLE AMBIENT DISPLAY, OVERRIDE ITS SETTINGS . DISABLE ¨CHECK PROXIMITY SENSOR BEFORE WAKING DEVICE¨.
I CANNOT RESIZE THE WINDOWS IN SPLIT SCREEN .HOW TO FIX ?
YOU NEED TO CHANGE THE DISPLAY SIZE TO SMALL /SMALLER I.E SIZE MUST BE LESS THAN DEFAULT
CANNOT ACCESS SD CARD FROM DEFAULT FILE MANAGER. HOW TO FIX ?
DELETE ¨ .ANDROIDSECURE ¨ FOLDER USING TWRP
BOOTLOADER
CAN I UNLOCK MY BOOTLOADER WITH THE UNOFFICIAL TOOL ?
YES ,ABSOLUTELY ITS SAFE.
I AM FACING CAMERA BLACK-OUT /NO CAMERA FOUND
ITS DUE TO BOOTLOADER. WE KNOW THAT, NOW STOP COMPLAINING ABOUT THAT.
[*]I AM FACING SCREEN -FREEZE / MOBILE HANGS
ITS DUE TO BOOTLOADER. WE KNOW THAT, NOW STOP COMPLAINING ABOUT THAT.
CHECK POINT "5"
I FOLLOWED THE EXACT METHOD AS STATED IN THE THREAD BUT I HAVE ISSUES?
ASUS HAS MESSED UP BY SHIPPING DIFFERENT PRODUCTS WITH SAME PHONE MODEL,SO ITS OBVIOUS YOU ARE LIKELY TO GET DIFFERENT RESULT
ANY FIX FOR BOOTLOADER ISSUE?
SADLY NO. YOU CAN TRY ALL THE TOOLS AVAILABLE ON INTERNET AND SEE IF THAT RESOLVES YOUR ISSUE.
You can check the below thread as some FIX for screen freeze has been found
Thread link :-CLICK HERE-
I WANT TO USE CUSTOM ROM , WHERE TO START?
BY UNLOCKING YOUR BOOTLOADER THEN FLASHING A CUSTOM RECOVERY LIKE TWRP
IS THERE ANY CUSTOM ROM THAT CAN BE USED ON LOCKED BOOTLOADER?
YES, YOU CAN USE THE ROMS THAT WORKS WITH STOCK KERNEL.BELOW ARE THE LINKS
AOSP BY leonardohenrique10,
CM 12.0
AOSP BY tank0412
WHICH TOOL SHOULD I USE , I AM A NOOB?
-UNLOCKING ZENFONE-5S BOOTLOADER FREEZE-
OR
-GUIDE TO UNLOCK BOOTLOADER SAFELY-
CAN STOCK BASED ROMS BE USED ON LOCKED BOOTLOADER?
YES ONLY IF THAT STOCK BASED ROM USES STOCK KERNEL
CUSTOM RECOVERY
IS CUSTOM RECOVERYAVAILABLE FOR ZENFONE 5?
YES
WHY SHOULD I USE CUSTOM RECOVERY?
DONT USE IF YOU DO NOT WANT TO .HAHHA,YOU NEED THAT FOR FLASHING STUFF LIKE ROMS, GAPPS, MODS AND VARIOUS STUFF
CAN I FLASH ROM /ZIPS THROUGH STOCK RECOVERY?
STOCK RECOVERY HAS LIMITATION THATS WHERE CUSTOM RECOVERY COMES IN.
IS TWRP 3.1.1 AVAILABLE?
NOPE , NOT YET.
GOOD NEWS FELLOW-BEINGS TWRP 3.1.1-0 AND 3.1.0 IS RELEASED.
CAN I CONVERT MY PARTITIONS TO F2FS FILE SYSTEM?
YES, IN TWRP IT HAS OPTION FOR THAT AND THE PROCESS HAS BEEN EXPLAINED IN THE THREAD. -CLICK HERE-
I CANNOT FLASH NOUGAT ROM .HOW TO FIX?
MAKE SURE YOU ARE USING LATEST TWRP . OLD TWRP HAS PROBLEMS WITH NOUGAT ROMS.
CAN YOU GIVE ME TWRP LINK ?
FOR TWRP 3.0.2-0
-CLICK HERE-
FOR TWRP 3.1.1-0 AND 3.1.0
-CLICK HERE-
CAN I UPDATE TO TWRP FROM TWRP 2.8.7?
YES .
CAN I UPDATE MY TWRP FROM TWRP 3.0.2-0
YES
MY PHONE SHUTS DOWN WHEN FLASHING ROM/ZIPS.
MAKE SURE YOU HAVE SOME JUICE LIKE 30% + LEFT IN YOUR DEVICE BATTERY.
I END UP WITH ERROR 7......UPDATE BINARY ....BLAH BLAH... WHILE FLASHING
UPDATE TO TWRP 3.0.2-0 OR THE LATEST 3.1.1
DID YOU FACED ANY ISSUE IN TWRP?
YES, MY DEVICE USED TO SWITCH OFF WHILE FLASHING GAPPS WHEN ,WHILE CHARGING,MY BATTERY IS IN BETWEEN 40-50% RANGE.
HOW DID YOU FIXED YOUR ABOVE MENTIONED ISSUE?
I FIGURED OUT THAT THE ISSUE OCCURED ONLY WHEN I AM FLASHING WHILE CHARGING SO I STOPPED DOING THAT
NOUGAT ROM THREAD LINKS
RESURRECTION REMIX
CYPHER OS
OCT OS
SLIM ROM
AICP
AEX
XOSP
MOKEE
AOKP
LINEAGE OS
KNOWN BUGS IN NOUGAT ROMS
resurrection remix
GPS, FM RADIO ,PROXIMITY SENSOR ALWAYS ON , earphones disconnect automatically sometimes,WE -CHAT FORCE CLOSE(TRUE FOR ALL BELOW ROMS)
lineage os
GPS,FM RADIO, Proximity sensor always on,Hotspot restart issue sometimes
aicp
GPS , FM RADIO
aokp
Import contact from SIM card
mGerrit f.c
GPS , FM
cypher os
NO ROOT , GPS ,FM RADIO
aosp extended
Popup Of 2 Libs which say text allocation,FM RADIO, GPS, BATTERY USAGE STATS DONT SHOW UP
oct-os
GPS, FM RADIO,PROXIMITY SENSOR ALWAYS ON
mokee
FM RADIO, GPS,CONTACT IMPORT FROM SIM
slim rom
NO ROOT, FM RADIO, GPS
XOSP
NO ROOT,FM RADIO , GPS
FLASHING ROMS
WHAT IS CLEAN FLASH
WIPING SYSTEM+DATA+CACHE+DALVIK CACHE.
WHAT IS DIRTY FLASH
WIPING CACHE/DALVIK
WHAT IS THE ADVANTAGE OF CLEAN FLASH OVER DIRTY FLASH
WHEN YOU ARE INSTALLING A NEW ROM OR MOVING FROM ONE VERSION TO ANOTHER CLEAN INSTALL IS PREFERRED. BUT IF YOU WANT JUST UPDATE ROM VERSION OF THE SAME WITHOUT LOOSING YOUR PERSONAL FILES DIRTY FLASH IS PREFERRED
HOW TO FLASH ROM IN MY DEVICE
BOOT TO TWRP .WIPE SYSTEM+DATA+CACHE+DALVIK CACHE. REBOOT TO TWRP AFTER WIPING. FLASH/INSTALL ROM+ADD-ONS(GAPPS, MODS ETC)
SHOULD I ALWAYS FLASH GAPPS WHILE DIRTY FLASHING?
IF YOUR ROM IS GAPPS PERSISTENCE THEN NO NEED ELSE YOU NEED TO FLASH GAPPS
WILL I LOSE MY APP + DATA WHILE DIRTY FLASHING?
NO
WILL I LOSE MY APP +DATA WHILE CLEAN FLASHING?
YES
HOW TO UPDATE MY CURRENT ROM?
BOOT TO TWRP . WIPE SYSTEM+CACHE/DALVIK. FLASH THE ROM+ADD-ONS .REBOOT TO SYSTEM
IS IT NECESSARY TO USE GAPPS ?
NO ,NOT AT ALL. IF YOU DONT WANT GOOGLE STUFF THEN DONT FLASH IT.
CAN YOU PROVIDE ME OPENGAPPS LINK?
-CLICK HERE-
BATTERY SAVING
THE MOST OBVIOUS PLACE TO START WITH IS DISPLAY SETTINGS .KEEP THE BRIGHTNESS LEVEL LOWEST WHENEVER POSSIBLE
TURN OFF AUTO BRIGHTNESS.AS THIS FEATURE REQUIRES SENSORS TO ADAPT THE BRIGHTNESS LEVELS, DISABLING WILL HELP TO SAVE SOME JUICE.
DISABLE AUTO SCANNING OF WI-FI AND BLUETOOTH
DISABLE LOCATION SERVICES WHENEVER NOT REQUIRED
DISABLE ANIMATIONS . IT WONT HELP MUCH...BUT IT WILL MAKE YOUR DEVICE SEEM TO RUN INSANELY FAST
USING LSPEED by @Paget96
THREAD LINK :LSPEED
WHAT IS IT ?
ITS A SIMPLE APPLICATION/APK FILE, THAT DOES AWESOME JOB
WHAT DOES LSPEED DO?
L Speed is a modification that combines tweaks inside an intuitive application, the main goal of the tweaks is to improve performance, reduce stutters and lags, and expands battery life.
CAN I USE IT ON MY ZENFONE 5?
OFCOURSE
WHAT ARE THE REQUIREMENTS FOR USING LSPEED?
rooted Android device, Android 4.0.3 and later
WHY SHOULD I USE IT ?
IT TWEAKS THE KERNEL PARAMETERS,HAVE SOME GREAT FEATURES LIKE AGGRESIVE DOZE, GOVTUNER, SWAPPINESS ,SYSTEM UPDATE SERVICE WAKELOCK AND OTHER STUFF ,WHICH GIVES THE USER THE BEST EXPERIENCE HE/SHE CAN GET FROM HIS/HER DEVICE
I DONT KNOW HOW TO USE IT .
THE APP GOT DESCRIPTION OF FEATURES INSIDE IT .ALSO I HAVE ATTACHED A LSPEED PROFILE FOR YOU,YOU CAN USE THAT.
WHERE CAN I GET MORE INFORMATION ON LSPEED?
FROM THE THREAD ITSELF WHICH I MENTIONED ABOVE.
USING GOVTUNER BY @Debuffer
THREAD LINK : GOVTUNER
WHAT IS IT ? WHAT DOES IT DO?
This mod tweak the Governor tunables from your CPU governor to optimize the way it scales up/down to make it more effective. With this optimization your device will be smooth without all the drain caused by the stock governor configurations.
WHAT ARE THE REQUIREMENTS?
ROOT
CUSTOM RECOVERY
TERMINAL EMULATOR
CAN I USE IT ON MY ZENFONE ?
ABSOLUTELY
DOES THE GOVTUNER MOD AND THE ONE INCLUDED IN LSPEED APP USED TOGETHER?
NO USE ONLY AT A TIME . USE THIS STANDALONE MOD WITH OTHER FEATURES OF LSPEED,OR USE THE GOVTUNER FEATURE INCLUDED IN LSPEED.
HOW CAN I USE GOVTUNER?
OPEN TERMINAL EMULATOR ON YOUR DEVICE.
TYPE
Code:
su
HIT ENTER
TYPE
Code:
govtuner
HIT ENTER
AND NOW SET YOUR PREFERENCES .
HOW CAN I UNINSTALL IT?
You can flash the GovTuner Uninstaller or navigate to system/etc/govtuner in your custom recovery and flash the uninstaller.
USING GREENIFY BY @oasisfeng
THREAD LINK:GREENIFY
THREAD LINK :BETA THREAD
WHAT DOES THIS APP DO?
THIS APP HIBERNATES THE MISBEHAVING APPS ON YOUR DEVICE,RESULTING IN BETTER BATTERY AND SMOOTHENESS .
REQUIREMENT OF THIS APP ?
ANDROID VERSION 2.0 +
CAN I USE IT ON MY ZENFONE ?
YES
I AM RUNNING ANDROID 7.X.X . XPOSED NOT AVAILABLE ! SO HOW CAN I USE IT WITHOUT XPOSED?
NO NEED OF XPOSED. THE ROOT+PRIVILEGED MODE IS VERY EFFECTIVE.
AUTO HIBERNATION NOT WORKING . HOW TO FIX ?
CHECK YOUR ACCESSIBILITY OPTION.
I WANT MORE INFORMATION . WHERE TO GET ?
VISIT THE THREAD.
USING SERVICELY by @franciscofranco
THREAD LINK :SERVICELY
WHAT DOES THIS DO ?
THIS APP HIBERNATES THE APP AS GREENIFY DOES BUT IS VERY MUCH MORE AGGRESIVE IN DOING THAT. IT CAN ALSO HIBERNATE THE SERVICES LIKE GOOGLE PLAY SERVICE.
CAN I USE IT ON MY ZENFONE 5?
OFCOURSE
DOES THIS APP REQUIRES ROOT?
YES
WHAT IS SOFT HIBERNATION ?
ITS FORCE STOP/HIBERNATES THE APP
WHAT IS HARD HIBERNATION ?
IT DISABLE THE APPS
CAN I USE IT ALONG GREENIFY?
I WOULD NOT RECOMMEND . BUT IF YOU KNOW WHAT YOU DOING YOU ARE FREE TO USE AND GET MUCH MORE EFFECTIVE RESULT.
USING NAPTIME BY @franciscofranco
PLAY STORE LINK :NAPTIME
WHAT DOES THIS APP DO ?
THIS APP LETS THE ANDROID DEVICE TO GET INTO DOZE (DEEP SLEEP) AS SOON AS SCREEN LOCKS.
REQUIREMENT OF THIS APP ?
ANDROID 6.0 + AND ROOT
CAN I USE ON ZENFONE 5 ?
YES
I DONT KNOW HOW TO USE IT .
THE APP IS SELF EXPLANATORY.
ADDONS IN ASUS ZENFONE
BOOT-ANIMATIONS
1. WATCHDOG v2.0 BY @juyel92
2. LAMBORGHINI BY @juyel92
3. CALL OF DUTY BY @juyel92
4. DAREDEVIL BY @juyel92
5. WATCHDOGS 2 v1.0 BY @juyel92
6.GOOGLE PIXEL BY @juyel92
7. GOD OF WAR BY @juyel92
8.NEW REALITY v1.0 BY @juyel92
9. GTA V BY @juyel92
THEMES
1. THEME FOR NOUGAT BY @Nikhilkumar038
2. PIXEL OS BY @kihope12
3. ZENMI-UI BY @nheolinkin
4. VIBE UI 2.0 AND 3.0 BY @kihope12
5. BETA THEME FOR O-UI BY @Nikhilkumar038
6. DARK UI BY @kihope12
7. 5.0 BY @kokyu930
8. AOSP BY @kihope12
9. ZENMI -UI v3.0 BY @kihope12
THEME FOR TWRP
DARK STOCK THEME BY @paktepu
USING KERNEL TWEAKING APP LIKE KA OR EXKM
I HAVE ATTACHED THE ZIP FILE BELOW. FOR INFORMATION ON THAT ZIP SCROLL TO POST 3 OR CLICK HERE
Content update list
30/05/2017
Code:
thread initialized
Added nougat roms topics
31/05/2017
Code:
Added bootloader topics
03/06/2017
Code:
Added recovery topics
04/06/2017
Code:
Added rom thread link
05/06/2017
Code:
Added known bugs topic
Added flashing topics
06/06/2017
Code:
Added battery saving tips
10/06/2017
Code:
Added GovTuner, Greenify, Servicely, Naptime topics
01/09/2017
Code:
Added Bootanimation and themes
Certain updates in content
04/10/2017
Code:
Added version updates for twrp 3.1.1 and 3.1.0 and provided redirects.
Certain Q&A updates of twrp
NOTE:
Lspeed zip
Its a backup of my profile which i have attached. you need to unzip the file and place it under internal memory/LSPEEDBACKUP folder . after that you can restore it from within the lspeed app.
KERNEL TWEAKS zip
IT CONTAINS JUST THE SCREENSHOT OF THE VALUES.
There are Roms for locked bootloader actually (AOSP 5.0.2 and CM12). They both use stock kernel.
nheolinkin said:
There are Roms for locked bootloader actually (AOSP 5.0.2 and CM12). They both use stock kernel.
Click to expand...
Click to collapse
Please read the op again its only for nougat roms . I am aware of the two roms you mentioned . Thank you
Boomshiva said:
Please read the op again its only for nougat roms . I am aware of the two roms you mentioned . Thank you
Click to expand...
Click to collapse
My bad
BTW, do you know how to disable sensors (hardware) in Nougat without using module?
nheolinkin said:
My bad
BTW, do you know how to disable sensors (hardware) in Nougat without using module?
Click to expand...
Click to collapse
Mind telling which sensor ?
Boomshiva said:
Mind telling which sensor ?
Click to expand...
Click to collapse
Proximity and light sensor perhaps. Or solution for any sensor could be great.
Atlast someone has created this full question/answer thread for NOOB peoples (who don't use the search feature).
Good job @Boomshiva
@Boomshiva
Can we add how to clean flash and dirty flash ROMs.... ????
Should I help you with anything bro??
Janus Jerom said:
@Boomshiva
Can we add how to clean flash and dirty flash ROMs.... ????
Should I help you with anything bro??
Click to expand...
Click to collapse
I will update the thread with more topics shortly . Thank you
Can somebody give me link of lineage rom?
_ladiesman217 said:
Can somebody give me link of lineage rom?
Click to expand...
Click to collapse
Linage OS : https://drive.google.com/drive/folders/0B7jApZFEHXFuZGxIblhESlRyNHc
All ROM's : https://forum.xda-developers.com/zenfone-5/general/resources-one-roms-kernel-recovery-t3616910
(Still under construction)
_ladiesman217 said:
Can somebody give me link of lineage rom?
Click to expand...
Click to collapse
THREAD UPDATED !!! stay tuned . for link check op thank you
Boomshiva said:
THREAD UPDATED !!! stay tuned . for link check op thank you
Click to expand...
Click to collapse
I would recommend you to add known bugs of those ROM's so noobs dont spam the rom threads.
rkj911 said:
I would recommend you to add known bugs of those ROM's so noobs dont spam the rom threads.
Click to expand...
Click to collapse
UPDATED !!!
One more question,wechat not works on all nougat roms?
_ladiesman217 said:
One more question,wechat not works on all nougat roms?
Click to expand...
Click to collapse
Yes , its problem of wechat , which we chat team didnt fix yet.
Janus Jerom said:
@Boomshiva
Can we add how to clean flash and dirty flash ROMs.... ????
Should I help you with anything bro??
Click to expand...
Click to collapse
Thread updated !!
Which one do you prefer,lineage or rr?
Some information you should know..
This is a full Stock ROM with android version 8.0
If you want to report a Bug, read the F.A.Q First Then provide a logCat OR LoggingKit.zip with detailed explanation
Read the instructions and the F.A.Q Before installing the rom or posting a reply.
You are not allowed to use this base, if you want to make rom, "DIY"
Any sort of File Kanging will be reported without hesitation, we know our codes.
If you like this rom and appreciate my efforts, Hit the Thanks button, and consider a donation
This is the first Oreo Custom ROM for this device.
RULES OF POSTING : READ everything before commenting, And especially the install steps, the rom has been tested throughly for a long time, so if you have an critical issue like not booting or no sim, you missed the instructions, posts that are irrelevant to this project will be ignored(Constructive criticism is welcomed). If you do face a new bug however, dont just say "hey bug here" provide more information, and a LOGCAT, bug reports without logcats will most likely be ignored.
Android 8.0
Deodexed
Heavily debloated
Zipaligned
Very Optimised
Battery and performance better than stock
Full Samsung experience 9.0 without missing vital apps
And many more
Extra Features :-
All the original features are present (Wifi,Bluetooth etc)
Many prop and feature tweaks
DE-Knoxed and disabled Additoinal samsung root preventions and secuirty spams
Official status in settings
Many prop tweaks
Many feature tweaks
Check the changelogs for the FULL feature set
Kernel :-
OxygenKernel V1
- Basic Kernel to Boot Oreo on exy7570
- Support for deodexed Oreo systems
- Samsung Security Disabled
- Disabled more knox and logging
- Knox 0X0
- Bootstate Green for safteynet
- Patched some props for safteynet
- Init.D Support
- Other minor improvments
and many more goodies
ensure you have LATEST TWRP
Download and copy the ROM to your device external SDcard (preferred)
Wipe everything (SYSTEM,DATA,CACHE,DALVIK and preferably Internal storage all together)
Flash the recovery.img from downloads section
Reboot to recovery
Flash the ROM.ZIP
Flash Magisk
Reboot system
@asysh
@BlackMesa123 for RMM switch
@samsung
@topjohnwu for for magisk
Testers :
ME
Downloads. Changelogs , F.A.Qs below
XDAevDB Information
Extreme, ROM for the Samsung Galaxy J3
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: Latest bootloader and modem
Based On: TouchWiz
Version Information
Status: Testing
Current Stable Version: V1
Stable Release Date: 05.06.2019
Created 05.06.2019
Last Updated 05.06.2019
DOWNLOADS
DOWNLOADS:
Extreme ROM V1 Based on Stock ROM [LATEST]
J330F:https://mega.nz/#!jHhViSjA!pR3IQrguIVwA9JBb3UiXEsR1brfpAORmU26Ue272KUo
J330FN:https://mega.nz/#!LLIX2SSK!8iXjkjJiqahydPO40kLAugdPJpX_pdiDmoFp1nsLpM8
recovery.img:https://mega.nz/#!neRhVS4B!UH_4VeBm_OMyjPTKRQKvRtwODiz7n8MTBXprQrXpni8
reserved2
reserved2
reserved3
reserved3
I will try it when I get home
I do not understand. Yesterday I downloaded V2 version. Today, there are no versions of V2. What's the last one?
regards,
zlihtar
zlihtar2 said:
I do not understand. Yesterday I downloaded V2 version. Today, there are no versions of V2. What's the last one?
regards,
zlihtar
Click to expand...
Click to collapse
Did you get it to boot?
Because I can't
zlihtar2 said:
I do not understand. Yesterday I downloaded V2 version. Today, there are no versions of V2. What's the last one?
regards,
zlihtar
Click to expand...
Click to collapse
This would be the V3 but I remade it from scratch and I put V1.This is the latest one.
Benfatica said:
Did you get it to boot?
Because I can't
Click to expand...
Click to collapse
Did yo u install the modded recovery? And why arent u responding on Tele?
victorAndrie said:
Did yo u install the modded recovery? And why arent u responding on Tele?
Click to expand...
Click to collapse
I had to reset my phone and I forgot to install Tele
Benfatica said:
I had to reset my phone and I forgot to install Tele
Click to expand...
Click to collapse
Ok
victorAndrie said:
Ok
Click to expand...
Click to collapse
I will install it when I get home
---------- Post added at 08:39 AM ---------- Previous post was at 08:08 AM ----------
victorAndrie said:
Ok
Click to expand...
Click to collapse
I just tried it but got a black screen again
Has anyone tried yet? Benfatica, what is your version J330F or J330FN?
Thanks,
regards
zlihtar2 said:
Has anyone tried yet? Benfatica, what is your version J330F or J330FN?
Thanks,
regards
Click to expand...
Click to collapse
it's the FN version
hello , after instalation my phone don't boot
Edit : the bootlogo don't boot
ExtremeGrief said:
Did yo u install the modded recovery? And why arent u responding on Tele?
Click to expand...
Click to collapse
same cant boot just black screen
how to instal moded twrp ? I used normal twrp
I tried install moded recovery with adb but phone wont boot up into recovery mode
All the links are dead
Hello developer! Please help fix link download rom.
nil2009 said:
Hello developer! Please help fix link download rom.
Click to expand...
Click to collapse
This rom has been abandoned. The chances of the download link being fixed are very low.
Will there be a version for j327p???