[ROM][E210][LineageOS 14.1]LineageOS for E210L/S/K + extras - Galaxy S III General

[size=+2]This ROM is no longer updated as I don't have the device anymore. Feel free to use my code from GitHub to compile newer versions.[/size]
I have created this ROM for my E210L and I would like to share it here. This is direct port of Cyanogenmod/LineageOS from i9300 to E210L/S/K.
My ROM is based on work from FullGreen: https://github.com/FullGreen and on weeks of original research.
Previous versions of my ROM was direct ports of FullGreen ROM to E210L, later version was ported from scratch from CM13 stable release ZNH5Y sources for i9300, and still had many things based on FullGreen work.
The new version is based on latest source of LineageOS for GT-I9300.
[size=+3]ROM Download[/size]
https://www.androidfilehost.com/?w=files&flid=146865 - updated at 2018-10-02.
Older releases:
https://mega.nz/#F!28xyAJTY!gQ5dsDWIz3ydJkhyHEZ1fQ
[size=+3]Flashing[/size]
It is always recommended to upgrade to latest official stock ROM before switching to LineageOS. This is because latest stock ROM includes updated modem and bootloader.
To flash the ROM, use TWRP - for E210L it is available together with the ROM. For E210S and E210K, use TWRP for I9300 from http://twrp.me.
GApps can be downloaded from http://opengapps.org/ , architecture ARM, version 7.1, variant nano.
Boeffla kernel - optional - is also available with the ROM, it can be installed from recovery if you wan't to use it.
[size=+3]WARNING!!![/size]
PLEASE BACK UP EFS BEFORE FLASHING!!! Tweaking this phone can cause EFS wipe in some cases, and you must have a backup to restore it to normal.
[size=+3]Known bugs:[/size]
- Signal strength sometimes will be shown empty, this is only cosmetic issue (but too difficult for me to fix) and don't affect real signal strength.
- As my ROM is based on official LineageOS sources, and for now there is no stable release of LineageOS, if there are bugs in official LineageOS for i9300, they will be probably present also in my ROM.
- Cell broadcasts are disabled as they seem to cause battery drain.
Please note that for most of the cases I cannot solve bugs as I'm not LineageOS developer, I'm only doing a direct port from I9300 to E210.
[size=+3]Troubleshooting[/size]
If having issues with WIFI or IMEI:
Enable developer options and ADB root access, then connect phone to computer and enter in adb shell:
Code:
su
restorecon -R -F /efs
reboot
You have to do this from normal LineageOS, NOT from recovery or from stock/another ROM.
If you restore EFS from backup or go to another ROM and return to this ROM and you have problems, do this again.
There is no harm in doing this if not sure.
If your WIFI still not working, read this:
WIFI module in Galaxy S3 can be of three different types - murata, semco and semcosh. Normally the driver should be able to detect the right type by MAC address, but in LineageOS detection not always works correctly. Theoretically this can be a problem also for the regular model GT-I9300, but it seems to affect mainly the SHV-E210 model. To overcome this, I have made an option to manually override your WIFI module type. To do this, you have to update to my latest version of the ROM and then create an empty file named wifi_override_murata or wifi_override_semco or wifi_override_semcosh in your /data partition.
To do this, enable developer options, then turn on root access for ADB, then connect phone to computer, enter adb shell and execute :
Code:
su
For murata :
rm /data/wifi_override_semco
rm /data/wifi_override_semcosh
touch /data/wifi_override_murata
For semco :
rm /data/wifi_override_semcosh
rm /data/wifi_override_murata
touch /data/wifi_override_semco
For semcosh :
rm /data/wifi_override_murata
rm /data/wifi_override_semco
touch /data/wifi_override_semcosh
Then reboot the phone and try again using WIFI. You have try each of the three options to determine which option is right for your device. And if you hard reset your device, you will have to do this again.
In voice call, if the other person hears an echo of himself try to change AudioFX settings or disable AudioFX in the app.
[size=+3]Source code:[/size]
https://github.com/kmmng/cm14_c1
[size=+3]Thanks to:[/size]
The G-O-D for everything! ,
CyanogenMOD and LineageOS teams for the OS,
FullGreen for the ROM and the kernel,
TWRP for custom recovery,
osm0sis for Android Image Kitchen,
xpirt for sdat2img and rimg2sdat,
Lord Boeffla for his kernel and Anykernel scripts,
and everyone else I have used their work.

Runs great so far!
Nice job on making this work on this device, a fix for the battery drain issue would be perfect. I sadly do not have knowledge of this else i would be able to assist. Keep it up!

Perfect!!
Good job, the battery drain is high but the rom is fantastic, thanks for this

uhmm Where to get the Shv e210k version of this rom all i see is for L and S plss help

Nigellross said:
uhmm Where to get the Shv e210k version of this rom all i see is for L and S plss help
Click to expand...
Click to collapse
Try to use e210s version, s and k models are very similar.

Ve tried to use the s version on my shv e210k but im stuck at samsung galaxy logo ... is therw any fix

HUDASnotcare said:
Ve tried to use the s version on my shv e210k but im stuck at samsung galaxy logo ... is therw any fix
Click to expand...
Click to collapse
Try to flash this kernel after flashing S version. I cannot test it as I don't have the device, but I hope it will work.

No wifi
kmmng said:
Try to flash this kernel after flashing S version. I cannot test it as I don't have the device, but I hope it will work.
Click to expand...
Click to collapse
Its working thanks but now Unable to connect o my wifi help

HUDASnotcare said:
Its working thanks but now Unable to connect o my wifi help
Click to expand...
Click to collapse
Try this, I don't sure this will work as I don't have this device so i don't sure which wifi module it have.

GApps
Thanks men it works but i cannot install any gapps and getting an error google play frameworks not stopped
---------- Post added at 10:26 PM ---------- Previous post was at 10:25 PM ----------
kmmng said:
Try this, I don't sure this will work as I don't have this device so i don't sure which wifi module it have.
Click to expand...
Click to collapse
Thanks it work great but now experiencing gapps not working need help... also notifs led is not working ... sorry for the trouble

HUDASnotcare said:
Thanks it work great but now experiencing gapps not working need help... also notifs led is not working ... sorry for the trouble
Click to expand...
Click to collapse
Try to use E210S version from 2016-03-16 and not the last one.
Also try to install in this order : first erase data from recovery, then install rom, then install gapps, then install kernel - all this without rebooting. Only when everything is installed you can reboot.

Mine problem is losing signal after typing long message pls help guys, im using e210l and Boeffla kernel. thanks.

ROM updated to new version, https://mega.nz/#!6kJWFYSD!vDn3YI5-bgHOIsQvrblLaIRPrK5YEtQ3xlDSbApCdUI

Thank you soo much for this rom

đa
update plz

meeeeeooo said:
Mine problem is losing signal after typing long message pls help guys, im using e210l and Boeffla kernel. thanks.
Click to expand...
Click to collapse
same here, but i tested many roms 6.0, imo bug after port
shv e210k

wifi connection failure

Updated to new version

Thanks for the ROM, but the boeffla kernel in this versión Don't work, is stuck in cyanogen logo.

My device is SHV E210L
Rom : Blekota Note 4 Lite Rom 4.4.4
How to flash this rom?

Related

[ROM | ZTE OPEN] FFOS 1.2 multilanguage - upgradeable through B2G nightlies

Hello again:
Build B2G for ZTE Open (inari) is tricky. People who want to develop applications with firefox's app-manager extension need to wait for ZTE upgrades or build their own system, which involves some permission modifications in boot.img and some tweaking to recover the bootanimation (lost on custom builds) among other things.
But hey, I've build a production pre-release of firefox os 1.2, and so far so good , and I like to share it with you via a flashable .zip file. Remember this file can be installed ONLY from CWM recovery, cause its not signed
features:
Version 1.2-prerelease (user release):
Build with blobs from version 1.1.0B02 (also known as 1.1.0B06) for ZTE Open (EU version)
Multilanguage - upgradeable through B2G nightlies (for both gecko & gaia)
Compatible with firefox app-manager (firefox 26+)
Includes su & busybox binaries ( busybox is linked with clear, grep, head, less, lsmod, more, nohup, pidof, ping, printf, pstree, sysctl, tail, telnetd, tftpd, traceroute, uname & usleep, for debugging via adb)
No carrier branding, just official firefox os branding
Fastboot enabled | ADB rooted
does *NOT* overwrite your recovery partition (you won't loose CWM recovery )
known bugs: isn't a bug but a security feature: "ADB should not be allowed to connect when device is locked in production builds"
FAQ:
I'm on version 1.x.y of 'some-carrier' build, Will this zip work in my case: Yes, only and just only if you have CWM installed.
There are a lot of strange files inside .zip, why ? this is because ZTE provides upgrades with radio & bootloader firmware (incompatibles between versions) If I want to support this ROM I need to make sure everyone have the same version ( the version that matches with the blobs )
Of course, YOUR WARRANTY IS VOID, and if you brick your phone , this is NOT MY FAULT
the link to the zip file: ul.to/2jwkruhj​
Feedback is welcome
paziusss said:
Hello again:
Build B2G for ZTE Open (inari) is tricky. People who want to develop applications with firefox's app-manager extension need to wait for ZTE upgrades or build their own system, which involves some permission modifications in boot.img and some tweaking to recover the bootanimation (lost on custom builds) among other things.
But hey, I've build a production pre-release of firefox os 1.2, and so far so good , and I like to share it with you via a flashable .zip file. Remember this file can be installed ONLY from CWM recovery, cause its not signed
...
Feedback is welcome
Click to expand...
Click to collapse
Runs great, I will use your build to test and mod some apps with the app-manager.
And please, stay at this good work (updates etc?!)
---edited:
Is your build a development build (of FFOS 1.2)? I cant't open certified apps with the app-manager (I have changed the pref "devtools.debugger.forbid-certified-apps" to false in my profile. But there is no certified app to see or to open in the app-manager. If not, can you - or somebody else - build this development build of FFOS 1.2?
ROM is pretty stable. I don't know if I'm the only one having this issue, but it looks like my data is connecting but then it isn't working. I'm connected to AT&T right now. When I pull down the notification bar, I see that I am getting an "H" (HSPA+) signal but if I try to open firefox and hit a site, it says I'm not connected to the internet.
I'm aware that this is in a prerelease state but do you know how I could fix this?
@martin_s5670: AFAIK there are three types of builds: engineer builds, userdebug builds and user builds. This is an user build, but you can also test privilegied (aka certified) apps on it. If you want to see your installed system apps I'm sorry but you can't do it in this way
@ryanolson7: could you please test your connection via a ping
adb shell
ping www.google.com
if you can't reach google, then I would appreciate if you paste somewhere your logcat in this way:
adb logcat | grep RIL > file.log
and just deactivate data, wait a few seconds, and activate it again.
---
I'll do some further tests on this branch (because some blobs may change from 1.0.1) but here in Spain both 3G & 2G data seems to works well, need to find a place with HSPA+.
Are you in the USA? I'm asking because this rom is based in open_eu release ( AFAIK they are the same except for radio capabilities )
Thanks for the feedback
Great Job!
Thanks! Tried and working. I have even received a update, and still working smooth!
can you tell me about the creating this ROM process?
I'm using US rom, I just want to use these blobs to make a custom builds, but flashing all the images bricked my phone. Can you explain me about the steps you did to package this ROM?
paziusss said:
...
Feedback is welcome
Click to expand...
Click to collapse
@ paziusss:
Maybe a littele bug: The app "calendar" starts everytime when your build will be booted - without open it separetly.
im new here
i want to know if i can use this in my nexus 4 multirom android 4 KK
Need FF OS 1.3
Can anyone please provide me zip file of FF OS 1.3?
Thanks
LinuxHolic said:
Can anyone please provide me zip file of FF OS 1.3?
Thanks
Click to expand...
Click to collapse
Not quite a zip, but, https://daylightpirates.org/b2g_inari_nightly_builds/
Bad Luck
Deathwish238 said:
Not quite a zip, but, https://daylightpirates.org/b2g_inari_nightly_builds/
Click to expand...
Click to collapse
I flashed the latest nightly build and everything went fine but my mobile is sitting on Fox now and restarts constantly
Look
LinuxHolic said:
I flashed the latest nightly build and everything went fine but my mobile is sitting on Fox now and restarts constantly
Click to expand...
Click to collapse
groups [dot] google [dot]com/d/msg/mozilla.dev.b2g/dENpc-7Fbi4/80t6EyS6bwIJ
is the included radio for european or american zte opens?
@hecatae:
blobs were pulled from 1.1.0B02 - UK but radio firmware should be the same for both UK and US versions
paziusss said:
Hello again:
Build B2G for ZTE Open (inari) is tricky.
Feedback is welcome
Click to expand...
Click to collapse
HI!
Can you build with added Russian keyboard?
I wanna use 1,2. Because it have RU locale, but have not keyboard.... (((
At 1.1. have not RU locale, but it have RU keyboard
FM radio doesn't work, no sound.
Japanese?
Could someone enable the Japanese keyboard and provide a ROM? I can explain how to do it, just can't build for it
thanks
thanks for your rom

[5.1.1] Lollipop MR1 | Unofficial CM12.1 | Oppo Find 5 | 2015-07-29

/*
Usual Disclaimer: This is an untested compiled ROM. Expect nothing to work.
Dev/test team is not responsible for any bricked devices, wars or terrorist attacks because of the usage of this ROM.
All credits goes to:
- CyanogenMod team
- Brave heart people who will flash, test and report bugs
- Additional developers who will help with solving issues and adding features
*/
I have been finally able to compile CM12.1 for our beloved device. This compilation is pure unadulterated 12.1. The ROM is NOT TESTED AT ALL. EXPECT NOTHING 2 WORK!
All other goodies including screenshots, enhancements, etc. will follow.
Help needed for:
- Flashing, testing and putting out bug reports
- Providing solutions and re-basing to latest CM releases
XDA:DevDB Information
UNOFFICIAL CM12.1 Find5 ROM, ROM for the Oppo Find 5
Contributors
wolverine2k
Source Code: https://github.com/CyanogenMod/android
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Oppo Find5 Phone and a BRAVE HEART!
Based On: Pure Unadulterated CyanogenMod
Version Information
Status: No Longer Updated
Created 2015-07-14
Last Updated 2016-04-23
Reserved
FAQs:
Q: How do I flash the ROM?
A: Any recovery allowing ROM flashing should work. I am using OpenRecovery though.
Coming from Previous Version or if you want a dirty install:
1. boot into recovery
2. flash the Rom
3. reboot
Coming from Previous Version and if you want a clean install:
1. boot into recovery
2. do a full wife
3. flash the Rom
4. reboot
Coming from Any Other ROM:
1. Boot into Recovery
2. Do a full wife (format date, sysyem, preload & cache is the best)
3. Flash ROM
4. Flash Additional GAPPS if you want (GAPPS for 12.1 --> Slim_mini_gapps.BETA.5.1.build.0.x-20150812.zip)
5. Reboot
6. Don't restore system stuff or apps + data using Titanium, it might cause issues
Reserved
where I can download the rom to test ... ???
x1123 said:
where I can download the rom to test ... ???
Click to expand...
Click to collapse
Updated the main thread with the download link (http://forum.xda-developers.com/devdb/project/dl/?id=13745&task=get).
Cheers
no other info about what is working and whatnot?
Even you did not install it on your device? :angel:
grimpressive said:
no other info about what is working and whatnot?
Even you did not install it on your device? :angel:
Click to expand...
Click to collapse
Modified some kernel parameters to get the build working. Haven't been able to test everything but most of all should be working. The updated build is posted. Initial screenshots attached.
Greatly Improved Build: 29th July, 2015
Dear All,
There is a new CM12.1 build available which works pretty good. All CM 12.1 Features and Bugs apply. Can be used on a normal Device.
Status Updated to Release build.
Download from: http://forum.xda-developers.com/devdb/project/dl/?id=13787&task=get
Cheers,
wolverine2k said:
Dear All,
There is a new CM12.1 build available which works pretty good. All CM 12.1 Features and Bugs apply. Can be used on a normal Device.
Status Updated to Release build.
Download from: http://forum.xda-developers.com/devdb/project/dl/?id=13787&task=get
Cheers,
Click to expand...
Click to collapse
Hi, Ive just flashed this rom on my find5. Everthing work ok but sim. My mobile cannot regconize my sim so I cannot make a call. It says im on flight mode. I had already wiped all before flashing rom but no better. Do you have any idea about this issue.
Thanks
-
selphien said:
Hi, Ive just flashed this rom on my find5. Everthing work ok but sim. My mobile cannot regconize my sim so I cannot make a call. It says im on flight mode. I had already wiped all before flashing rom but no better. Do you have any idea about this issue.
Thanks
-
Click to expand...
Click to collapse
Uploaded a new build (UNOFFICIAL_cm_find5-20150807.zip). Please flash this one. I have now made 2 radio properties persistent which allows for delayed SIM card detection and restarts RIL if needed. See the updated screenshots which shows the radio signal strength.
Cheers.
Bugreport and Working CM12 setup that works on my find 5...
wolverine2k said:
New Build: 7th August 2015. New screenshots.
Fixes:
- Radio working again (2 radio property edits in build.prop).
/*
Usual Disclaimer:
Dev/test team is not responsible for any bricked devices, wars or terrorist attacks because of the usage of this ROM.
All credits goes to:
- CyanogenMod team
- Brave heart people who will flash, test and report bugs
- Additional developers who will help with solving issues and adding features
*/
I have been finally able to compile CM12.1 for our beloved device. This compilation is pure unadulterated 12.1. Most of the things should work!
Post your bugs/issues in this thread. Also attach logcat or kernel logs if possible. Any & all help is greatly appreciated.
All other goodies including screenshots, enhancements, etc. will follow.
Help needed for:
- Flashing, testing and putting out bug reports
- Providing solutions and re-basing to latest CM releases
XDA:DevDB Information
UNOFFICIAL CM12.1 Find5 ROM, ROM for the Oppo Find 5
Contributors
wolverine2k
Source Code: https://github.com/CyanogenMod/android
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Oppo Find5 Phone
Based On: Pure Unadulterated CyanogenMod
Version Information
Status: Stable
Created 2015-07-14
Last Updated 2015-08-07
Download Link http://forum.xda-developers.com/devdb/project/dl/?id=13870&task=get
Screenshots
Click to expand...
Click to collapse
Hi I'm new here on XDA so if my postings are messed up.... you'll know why:good:
I just tried flashing this rom and I can report that gapps dosn't work or at least gives an error that some functions do not work.
I then tried flashing an updated gapps 5.1 but same error here.... I gues its more a gapps thing than the rom itself.
I couldn't find other errors that, and it seems very stable :good:
My current setup that works is this:
cm-12-20150802-NIGHTLY-find5
gapps-5.0.x-20150404-minimal-edition-signed
apoulsen said:
Hi I'm new here on XDA so if my postings are messed up.... you'll know why:good:
I just tried flashing this rom and I can report that gapps dosn't work or at least gives an error that some functions do not work.
I then tried flashing an updated gapps 5.1 but same error here.... I gues its more a gapps thing than the rom itself.
I couldn't find other errors that, and it seems very stable :good:
My current setup that works is this:
cm-12-20150802-NIGHTLY-find5
gapps-5.0.x-20150404-minimal-edition-signed
Click to expand...
Click to collapse
You are using the wrong GAPPS. Please use the one for 5.1.1. I am using https://www.androidfilehost.com/?fid=24052804347792592
Post your results back. If you still have problems, attach the logcat for the same.
After i disconnect wifi my oppo cannot connect mobile internet.
But after restart i can use cellular data again.
This problem occur every time that i disconnect to wifi.
Does not work the proximity sensor during call, but the sensor good works at tests. How it can be corrected. thanks
I hope "oppo camera" transfer to this roms.
Zerguz said:
Does not work the proximity sensor during call, but the sensor good works at tests. How it can be corrected. thanks
Click to expand...
Click to collapse
I will look into this in more details. Meanwhile, if you can get the logcat log attached, it would help me a lot.
boynareta said:
I hope "oppo camera" transfer to this roms.
Click to expand...
Click to collapse
Do you have the link to this "oppo camera" you are referring to? Is it the default in the latest Color OS?
simon2bb said:
After i disconnect wifi my oppo cannot connect mobile internet.
But after restart i can use cellular data again.
This problem occur every time that i disconnect to wifi.
Click to expand...
Click to collapse
This works good on my mobile. Can you send me the logcat logs for both radio and main buffers?
http://0fa8391b.dl-one2up.com/onetwo/content/2015/10/7/0fa8391bffee21e1110d96a9f2ce77a7.apk - OPPOcamera
http://2d245e84.dl-one2up.com/onetwo/content/2015/10/7/2d245e84f6821eb264f4841be9d552a0.apk - OPPOgallery2
simon2bb said:
After i disconnect wifi my oppo cannot connect mobile internet.
But after restart i can use cellular data again.
This problem occur every time that i disconnect to wifi.
Click to expand...
Click to collapse
Like in the official cm12 - I use it. After u turn off wifi go to mobil network settings, select apn-s, open the actual settings and just simply do a save on it. And viola the Mobil internet starting.

[index] Galaxy S4 mini i9195i

Hi! This is an index and guide about the Samsung Galaxy S4 mini plus i9195i
Rooting guide:
I downloaded Kingroot and rooted it there (even though it said not supported, it still worked). I then downloaded Super me and let it do it's magic (delete Kingroot apps and install SuperSU apps). It takes about 10 minutes. After 10 minutes, you can get your refund from the Play Store.
Xposed guide:
I downloaded the Xposed installer, went to install/update, and it all went smoothly for me. Other users reported boot loop, but my phone was fine, so don't blame me if you get boot loop.
Custom Roms:
KitKat ROMS:
CyanogenMod 11
Lollipop ROMS:
CyanogenMod 12.1
Marshmallow ROMS:
CyanogenMod 13
Nougat ROMS:
LineageOS 14.1
Oreo ROMS:
LineageOS 15.1
dotOS 2.4
Resurrection Remix 6.0.0
Pie ROMS:
LineageOS 16
Pixel Experience
Credits to @Danil_e71 for the development on our device
As far as my testing went, all these ROM's are pretty stable and that includes LOS 16. This device is not my primary device though, so I don't test as well as I used to. LOS 16 doesn't seem to have any major bugs. (I didn't even find minor bugs either, but again, I don't test properly.). You need the latest TWRP to flash it though.
Custom Kernels:
Custom kernel by alexax66 for stock ROM 4.4
.zip file (v 0.1.7)(Flash via recovery)
.tar file(v 0.1.7)(Flash via odin)
(v 0.1.7) Disc image file
Source
It works well, normal features work and it seems to make the phone work faster. I found that all kernel features do work, while there are a few bugs (I've come across 2: the alarm clock doesn't work and I can't search for mobile networks/ put new apns in). To make sweep2sleep work, you must insert
Code:
su
echo 1 > /sys/sweep2sleep/sweep2sleep
into the terminal after adding code to the build prop (this worked for me, but after a reboot it stopped). I installed first via TWRP official and then via Odin. I'm not sure if you have to do it that way, but I can assure you that if you do do it that way, it will work.
I would not recommend this kernel, due to its instability, although I did used to use it daily.
Custom kernel for stock ROM 4.4 by Danil_e71
https://forum.xda-developers.com/attachment.php?attachmentid=3778847&d=1465586157
I could not get WiFi working on this kernel.
Custom kernel for CM 11 by Danil_e71
https://forum.xda-developers.com/attachment.php?attachmentid=3778501&d=1465562842
Overclocks to 1.4 Ghz, and works well.
Custom Recoveries:
I am only listing the most recent versions:
CWM
flash via recovery (v 6.0.5.1) by @alexax66
flash via odin (v 6.0.5.1) by @alexax66
Disc image file (v 6.0.5.1) by @alexax66
Philz
flash via odin (v 6.59.0) by @alexax66
flash via recovery (v 6.59.0) by @alexax66
Source
TWRP
flash via recovery (v 3.1.0-0) by @Danil_e71
Stock ROM:
Here
Stock Kernel:
Latest stock kernel (Disc image file)
Stock Recovery:
Stock recovery (Disc image file)
Anyone else tryed this metod and can confirm that them devices is rooted ?
Zakariasz said:
Anyone else tryed this metod and can confirm that them devices is rooted ?
Click to expand...
Click to collapse
yeah I just rooted my device by installing the linked KingRoot apk. It failed the first try but I tried a second time and now it works
I don't have custom recovery, nor kernel nor Xposed framework yet though.
Stagefright-Official Rom
Hello,
just to say that I upgrade (odin flash) to last Official rom yesterday, find on sammobile:
Model GT-I9195I
Model name GALAXY S4 mini LTE
Country Netherlands
Version Android 4.4.4
Changelist 5332500
Build date Mon, 11 Jan 2016 11:42:16 +0000
Product code PHN
PDA I9195IXXU1APA1
CSC I9195IPHN1APA1
good news : all Stagefright detector are green !
exzemat said:
good news : all Stagefright detector are green !
Click to expand...
Click to collapse
What is Stagefright?
LoScienzo said:
What is Stagefright?
Click to expand...
Click to collapse
wikipêdia:
Stagefright is the collective name for a group of software bugs (or more specifically backdoors), that affect versions 2.2 ("Froyo") and newer of the Android operating system, allowing an attacker to perform arbitrary operations on the victim device through remote code execution and privilege escalation.[1] Security researchers demonstrate the bugs with a proof of concept that sends specially crafted MMS messages to the victim device and in most cases requires no end-user actions upon message reception to succeed, while using the phone number as the only target information.[2][3][4][5]
Sorry, but I have a stupid question:
Can I use the Netherlands-version also on devices that are used in other countries / with other carriers?
Bibabuzzel said:
Sorry, but I have a stupid question:
Can I use the Netherlands-version also on devices that are used in other countries / with other carriers?
Click to expand...
Click to collapse
Yes, you can, but I think if you wait, your country might come. They just (50 minutes ago) released one for region TPD here. I think I'm going to wait.
I use method described in the first post but with Super Sume v 9.1.9 and xposed installer from the first post and everything work like charm for the moment.
I've done it via same route, it was bit of a hassle for trying to find information about this exact phone. Nice compilation here. Thumbs up.
exzemat said:
Hello,
just to say that I upgrade (odin flash) to last Official rom yesterday, find on sammobile:
Model GT-I9195I
Model name GALAXY S4 mini LTE
Country Netherlands
Version Android 4.4.4
Changelist 5332500
Build date Mon, 11 Jan 2016 11:42:16 +0000
Product code PHN
PDA I9195IXXU1APA1
CSC I9195IPHN1APA1
good news : all Stagefright detector are green !
Click to expand...
Click to collapse
Are there any noticable differences in this update?
no other than more recent kernel build (11/01/2016) : more secure ...
I added a bunch of disc images of kernels and recoveries (no new releases ) I also added the newest stock kernel if anyone needs it. (Released 11 Jan 2016) Also, TWRP 3.0.0-0 is out for our device, links are there. Is anyone working on CM by the way?
Anyone flashed any of the stock firmware in the original post?
Mine came with the stock firmware from another country, and I would like to flash the one for my country to see if the cell phone signal is any better.
Should I bother?
BTW, will doing that trip the knox meter?
I tried to change Kingroot with SuperSUMe but can't do this, course can't brake Knox. I try to install SuperSU it also can't brake Knox. Wtf?
I need custom kernel without bugs for our i9195i.
I also can mention that the Rom for each country has special BB (baseband - drivers for radio module). But there is no any Rom for my country... So i have unstable signal...
---------- Post added at 05:02 PM ---------- Previous post was at 05:02 PM ----------
How to disable Knox?
There's a new official TWRP release (3.0.0-2) here , enjoy
Sent from my GT-I9195I
Update: Got a custom ROM fully working (with small bus where and there). Check the first post
DroidKing18 said:
Update: Got a custom ROM fully working (with small bus where and there). Check the first post
Click to expand...
Click to collapse
You've got a interesting thread here to stay up-to-date on info about our phone, but shouldn't you mention some credits to the guy(s) that found the cm11?
I think it's Chrisled2 talking about it on cyanogenmod-forum (i see he's active here also by the name of chrisled):
https://forum.cyanogenmod.org/topic/110203-gt-i9195i-supported/?page=2#comment-591554
There are mentions about problems with play store, and playing video files in browser.
But thanks again for keeping us up-to-date!
Could you maybe try and test the infrared-functions with the custom rom? I use it for my television and decoder.
bartiest said:
You've got a interesting thread here to stay up-to-date on info about our phone, but shouldn't you mention some credits to the guy(s) that found the cm11?
I think it's Chrisled2 talking about it on cyanogenmod-forum (i see he's active here also by the name of chrisled):
https://forum.cyanogenmod.org/topic/110203-gt-i9195i-supported/?page=2#comment-591554
There are mentions about problems with play store, and playing video files in browser.
But thanks again for keeping us up-to-date!
Could you maybe try and test the infrared-functions with the custom rom? I use it for my television and decoder.
Click to expand...
Click to collapse
I thought OyyO found it first but I wasn't sure. I would've given creds to the devs but they don't seem to be on this site, if they are, tell me, but I've only seen them on 4pda, a Russian site. The truth is that I didn't test it enough to notice all the bugs. I lost a lot of interest when I found that I couldn't put Xposed on
Sent from my GT-I9195I using XDA-Developers mobile app
Btw, there is a also TWRP 3.0.2 now so your links to the official builds are outdated - you may want to link directly to https://dl.twrp.me/serranoveltexx/

[Q&A] [ROM][6.0.1][910 G/F/T/...]RamROM_N7 - Note 7 full port

This thread has been created for Questions & Answers, Help & Troubleshooting​
Specific to:​RamROM_N7 - Note 7 full port​
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
This is the place for Q&A, general discussions, and pre-/post-installation chat about RamROM_N7 - Note 7 full port. You can post here all your personal issues that are not related to the development such as Xposed, Govtuner, themes, extra mods, other stuff, ... etc. Thanks in advance!
Before posting, please use the forum search and read through the discussion thread for RamROM_N7 - Note 7 full port. If you can't find an answer, post it here, being sure to give as much information as possible (910 Variant, firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy! ​
Post #2 - Most commons Q&A (current and older releases)
Post #3 - Bugs/Problems (current and older releases)
Post #5 - "How To" Guides
XDA:DevDB Information
[Q&A] [ROM][6.0.1][910 G/F/T/...] RamROM_N7 - Note 7 full port, ROM for the Samsung Galaxy Note 4
Contributors
Chimbat, Ram121, Strider72
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Current Stable Version: V1
Stable Release Date: 2017-01-09
Created 2017-01-11
Last Updated 2017-01-14
Most commons Q&A
RamROM N7_V1
Q: Can i install this Rom on my 910 XYZ Variant ?
A: The ROM default Kernel is Ramkernel for N910G, for other models install respective kernel and data fix, I recommend RamKernel
Q: How can i install this Rom on my 910T Variant ?
A: There is an installation guide specific for 910T users provided by @Jayster0966 here : https://forum.xda-developers.com/showpost.php?p=70529180&postcount=114
Q: How To Fix Data On Unlocked Sprint Model (N910P) Without Flashing A Zip File ?
A: There is an installation guide specific for Unlocked Sprint Model (N910P) users provided by @Graamsence here : https://forum.xda-developers.com/showpost.php?p=70591070&postcount=74
Q: I couldn't install apps from play store.
A: Wait for play services/play store to update.
Q: Root is not working, why?
A: Root is working fine. After flashing the Kernel just flash an Su zip (Super Su or another one).
Q: Camera n7 has only Auto mode?
A: Camera pro mode is also available if you just delete in /system/priv-app the "ShootingModeProvider" file and restart the phone.
Q: I'm having problem to see my pictures in the gallery, how to solve it?
A: There are two ways to solve this problem, at least until the dev posts the new version:
1. The ''Safe" way by : downloading a different version and manually installed it (make a backup of the file before and then just replace it manually..)​
2. The ''Easy'' way by : flashing the fix mentioned here https://forum.xda-developers.com/showpost.php?p=70530079&postcount=32​
Q:Soundalive is not working, how to solve it?
A:It can be solved by replacing SoundAlive_40.apk in system/ priv-app with a different version.
Also for Adapt_Sound, the Hearingdro_52.apk need to replaced.
The right permissions must be set.
*Alternatively, you can install Viper or Aryamod on a permissive kernel instead of using Soundalive -link-*
(Thanks to @callumbr1 & @Graamsence & @Benny Bosser )
Q:Torch light is not switching off from the control panel button
A: To turn off torch light use quick tools from edge panel. It's a "feature!" would have say steve Jobs
Q: How to enable Manual call recordings?
A: You can follow the instructions of the following post from @Strider72 : https://forum.xda-developers.com/showpost.php?p=70545588&postcount=55
Q: Do you have multiple fonts in this ROM?
A: YES!
Q: Can i install Xposed on RamROM N7?
A: Yes, you can flash Xposed v87.1 by wanam and install Xposed installer 3.0_Alpha4.apk
But remember : Don't report any bugs in the main dev thread if you are running Xposed on your device
Q: Who is hidden behind this RAM ROM TEAM?
A: There is no RamROM team only Ram, that's why the name is ROM of Ram that is RamROM
Bugs/Problems (N7_V1 release)
@Ram121 and all RamROM N7_V1 users
Check out the RamROM V2 work in progress here!
List of the problems/bugs that users encountered with the last Rom release (N7 V1) on Dev & QA Threads :
(List does not include the bugs which are already stated in the OP)
Not working :
SoundAlive (Can be solved : read post #2)
wifi hotspot ( Reported by 910F users )
Snapchat (910F on permissive kernel)
Working but with bug(s) :
videos on youtube are very laggy if playing above 1080p.
problems with gallery not showing some pictures. (Can be solve Temporarily by clearing the cache of the app - You can also read post #2 for other solutions)
Launcher has a small glitch when you scroll right (When you are at the right end of your launcher pages) and another small visual glitch when you scroll toward left.
Missing Features / Features Requests / Whishes list:
Auto/Manual call recording
Skipping music tracks by volume keys.
Setting-sound -> vibration->vibration feedback
Multiwindow apps
Rom Control feature
Slovakia / Czech / Turkish languages
Selection of bloatware/software to install while flashing the Rom in Aroma installer
Private Mode
Volte
3minit or equivalent clock
-------------------------------------------------------------------------------------------------------------------------------
If i missed some bugs or requests, you tell me and i will add it to the list.
It will be probably great to grab some logs to help the Dev to solve some of the issues.
Doesn't this thread belongs in general section?
How to guides
"HOW TO" GUIDES (Specific for RamROM N7) :
How to install the RamROM N7 on a 910T Device by @Jayster0966
https://forum.xda-developers.com/showpost.php?p=70529180&postcount=114
How To Fix Data On Unlocked Sprint Model (N910P) Without Flashing A Zip File by @Graamsence
https://forum.xda-developers.com/showpost.php?p=70591070&postcount=74
How to install Viper on RamROM N7 (by @callumbr1 & by @Graamsence )
Viper4Android v2.5.0.5 https://forum.xda-developers.com/showpost.php?p=70579010&postcount=70
Viper4Android V2.4.0.1_neon+convolvers https://forum.xda-developers.com/showpost.php?p=70575084&postcount=66
How to install Aryamod sound control on RamROM N7 by @Benny Bosser
https://forum.xda-developers.com/showpost.php?p=70592822&postcount=80
"HOW TO" GUIDES (GENERAL) :
How to flash Modem and Bootloader for Snapdragon Note4 by @Battlehero
https://forum.xda-developers.com/showthread.php?t=3273816
Modem & Bootloader for 910F Devices by @alexndr - Thanks to @Strider72-
https://www.androidfilehost.com/?w=files&flid=26335
How to solve wrong battery calibration by @Trex888
https://forum.xda-developers.com/showthread.php?t=3513268
PS: All fine! A great XDA moderator has moved the thread in it's right place : Galaxy Note 4 Q&A, Help & Troubleshooting
RamKernel for N910G/F/T/P/V/W8 that why i am N9100 dual sim not working/
hochocnua said:
RamKernel for N910G/F/T/P/V/W8 that why i am N9100 dual sim not working/
Click to expand...
Click to collapse
The answer is there :
Q: Can i install this Rom on my 910 XYZ Variant :
A: The ROM default Kernel is Ramkernel for N910G, for other models install respective kernel and data fix, I recommend RamKernel
Click to expand...
Click to collapse
You have a N9100 Dual sim not a SM-910G/F/T/P/V/W8
So you can try to install it with a N9100 Dual Sim Kernel and a data Fix + Super SU. If it's working on your device, you will be lucky and if not, you can't complain mate
because it's written nowhere that this Rom is compatible with your device. Have you ever try to flash an Exynos rom on your Device?:silly:
Chimbat said:
The answer is there :
You have a N9100 Dual sim not a SM-910G/F/T/P/V/W8
So you can try to install it with a N9100 Dual Sim Kernel and a data Fix + Super SU. If it's working on your device, you will be lucky and if not, you can't complain mate
because it's written nowhere that this Rom is compatible with your device. Have you ever try to flash an Exynos rom on your Device?:silly:
Click to expand...
Click to collapse
i see, i just love this rom and try to say something with someone have a N9100 like me. I am ok with Govtuner and Root package diable app. See you next time.
hochocnua said:
i see, i just love this rom and try to say something with someone have a N9100 like me. I am ok with Govtuner and Root package diable app. See you next time.
Click to expand...
Click to collapse
Ok mate, no worries and good luck in your quest!
using 910G / RamRom N7_V1 / Kernel v5 enforcing / Govtuner 3.8
Anyone know if snapchat works with this ROM. Mine currently isn't. Is there a fix or is it down to safety net?
callumbr1 said:
Anyone know if snapchat works with this ROM. Mine currently isn't. Is there a fix or is it down to safety net?
Click to expand...
Click to collapse
I can see by the number of your posts that you are an experienced user and i'm not using Snapshot as i already told you in the other thread but i'll try to help anyway (So don't see any offense in my questions):
1/ Did you flash clean the rom ?
2/ Did you restore your snapchat from Titatnium backup or you did do a fresh install?
3/ What variant of 910 are you on?
4/ What Ram kernel version are you using right now ? Permissive/Enforcing?
Chimbat said:
I can see by the number of your posts that you are an experienced user and i'm not using Snapshot as i already told you in the other thread but i'll try to help anyway (So don't see any offense in my questions):
1/ Did you flash clean the rom ?
2/ Did you restore your snapchat from Titatnium backup or you did do a fresh install?
3/ What variant of 910 are you on?
4/ What Ram kernel version are you using right now ? Permissive/Enforcing?
Click to expand...
Click to collapse
Its okay... my first few weeks with my note 4 and had nothing but trouble so far haha, but looks like things are sorted.
1- yes i did full wipe and clean flash. Wiped system, data, cache, dalvik, storage
2- no restore of snapchat. Fresh install from play store.
3- N910F
4- Ramkernel v5 permissive.
Before today i had stock rooted rom with ram kernel v4 and all was fine.
I have heard before when i had a note 7 rom for my s6 edge that snapchat also uses safety net like pokemon go which can prevent it from working. Not sure if this is correct.
Thanks for your help
Hello,
Seems all these N7 ports have huge battery drains. Tried many and this rom is no exception.
Anyways this is a very stable rom, grt work.
Thanks
Sent from my SM-N920F using XDA-Developers Legacy app
callumbr1 said:
Its okay... my first few weeks with my note 4 and had nothing but trouble so far haha, but looks like things are sorted.
1- yes i did full wipe and clean flash. Wiped system, data, cache, dalvik, storage
2- no restore of snapchat. Fresh install from play store.
3- N910F
4- Ramkernel v5 permissive.
Before today i had stock rooted rom with ram kernel v4 and all was fine.
I have heard before when i had a note 7 rom for my s6 edge that snapchat also uses safety net like pokemon go which can prevent it from working. Not sure if this is correct.
Thanks for your help
Click to expand...
Click to collapse
Hi mate! Sorry for the delay of my answer, i had a weird problem with XDA forum (Couldn't see the recents posts and i gave up after sometimes).
-Your problem might be related to the kernel, you may try to flash the Kernel V5 Enforcing for 910F Wihtout SuperSu 1st and see if Snapchat works
-Then you can try to flash Supersu and see if it still work despite of the root.
https://forum.xda-developers.com/note-4/orig-development/kernel-ramkernel-t3472138
I'm running Ram Kernel V5 Enforcing for 910G without any extra troubles.
hi_blues said:
Hello,
Seems all these N7 ports have huge battery drains. Tried many and this rom is no exception.
Anyways this is a very stable rom, grt work.
Thanks
Sent from my SM-N920F using XDA-Developers Legacy app
Click to expand...
Click to collapse
At the first boot of the 1st install of a new rom it's normal that the battery drains more i think.
I had around 16H battery with 100% on my first install of the rom with Govtuner 3.9.1 (Set on battery mode)
Now i have used 83% of my battery in almost 20H with Govtuner 3.8 (Set on battery mode). Which is better. I'll post some screenshot soon.
I attached some screenshots of GSAM & Kernel Audiutor
Edit: Waow! I could see recent changes in the dev's github and we can see that Synapse support is coming. Great!
Chimbat said:
Hi mate! Sorry for the delay of my answer, i had a weird problem with XDA forum (Couldn't see the recents posts and i gave up after sometimes).
-Your problem might be related to the kernel, you may try to flash the Kernel V5 Enforcing for 910F Wihtout SuperSu 1st and see if Snapchat works
-Then you can try to flash Supersu and see if it still work despite of the root.
https://forum.xda-developers.com/note-4/orig-development/kernel-ramkernel-t3472138
I'm running Ram Kernel V5 Enforcing for 910G without any extra troubles.
Click to expand...
Click to collapse
Its just strange because before i flashed the ROM i had ram kernel v4 permissive and root. I like to keep permissive kernel because i use viper.
callumbr1 said:
Its just strange because before i flashed the ROM i had ram kernel v4 permissive and root. I like to keep permissive kernel because i use viper.
Click to expand...
Click to collapse
Ok mate no worries it was just a suggestion. What Rom was you running with ram kernel v4 and snap chat was working ?
using 910G / RamRom N7_V1 / Kernel v5 enforcing / Govtuner 3.8
Chimbat said:
Ok mate no worries it was just a suggestion. What Rom was you running with ram kernel v4 and snap chat was working ?
using 910G / RamRom N7_V1 / Kernel v5 enforcing / Govtuner 3.8
Click to expand...
Click to collapse
No problem, it was just stock ROM, rooted with ram kernel v4. I think ill keep it as it is i would much rather have the ROM than snapchat to be honest
Xposed v87.1
Xposed by wanam V87.1 is working fine with RamROM_N7 V1 :
https://forum.xda-developers.com/xp...ds-cse&usg=AFQjCNHeZbdRr-zu9egpAEFJCuvTfcnt6Q
P.S : You need to disable/enable download in the Xposed settings to get download work.
But remember : DO NOT report any bugs in the main dev thread if you are running Xposed on your device!
wifi hotspot not working. I tried everything ex. like changing boolader and modem. Unfortunately. My device is N910F. But it is working on reddragon, nemesis, norma roms.

[ROM][8.0.0][ABANDONED] Extreme Stock ROM for Samsung Galaxy J3 2017

Some information you should know..
This is a full Stock ROM with android version 8.0
If you want to report a Bug, read the F.A.Q First Then provide a logCat OR LoggingKit.zip with detailed explanation
Read the instructions and the F.A.Q Before installing the rom or posting a reply.
You are not allowed to use this base, if you want to make rom, "DIY"
Any sort of File Kanging will be reported without hesitation, we know our codes.
If you like this rom and appreciate my efforts, Hit the Thanks button, and consider a donation
This is the first Oreo Custom ROM for this device.
RULES OF POSTING : READ everything before commenting, And especially the install steps, the rom has been tested throughly for a long time, so if you have an critical issue like not booting or no sim, you missed the instructions, posts that are irrelevant to this project will be ignored(Constructive criticism is welcomed). If you do face a new bug however, dont just say "hey bug here" provide more information, and a LOGCAT, bug reports without logcats will most likely be ignored.
Android 8.0
Deodexed
Heavily debloated
Zipaligned
Very Optimised
Battery and performance better than stock
Full Samsung experience 9.0 without missing vital apps
And many more
Extra Features :-
All the original features are present (Wifi,Bluetooth etc)
Many prop and feature tweaks
DE-Knoxed and disabled Additoinal samsung root preventions and secuirty spams
Official status in settings
Many prop tweaks
Many feature tweaks
Check the changelogs for the FULL feature set
Kernel :-
OxygenKernel V1
- Basic Kernel to Boot Oreo on exy7570
- Support for deodexed Oreo systems
- Samsung Security Disabled
- Disabled more knox and logging
- Knox 0X0
- Bootstate Green for safteynet
- Patched some props for safteynet
- Init.D Support
- Other minor improvments
and many more goodies
ensure you have LATEST TWRP
Download and copy the ROM to your device external SDcard (preferred)
Wipe everything (SYSTEM,DATA,CACHE,DALVIK and preferably Internal storage all together)
Flash the recovery.img from downloads section
Reboot to recovery
Flash the ROM.ZIP
Flash Magisk
Reboot system
@asysh
@BlackMesa123 for RMM switch
@samsung
@topjohnwu for for magisk
Testers :
ME
Downloads. Changelogs , F.A.Qs below
XDAevDB Information
Extreme, ROM for the Samsung Galaxy J3
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: Latest bootloader and modem
Based On: TouchWiz
Version Information
Status: Testing
Current Stable Version: V1
Stable Release Date: 05.06.2019
Created 05.06.2019
Last Updated 05.06.2019
DOWNLOADS
DOWNLOADS:
Extreme ROM V1 Based on Stock ROM [LATEST]
J330F:https://mega.nz/#!jHhViSjA!pR3IQrguIVwA9JBb3UiXEsR1brfpAORmU26Ue272KUo
J330FN:https://mega.nz/#!LLIX2SSK!8iXjkjJiqahydPO40kLAugdPJpX_pdiDmoFp1nsLpM8
recovery.img:https://mega.nz/#!neRhVS4B!UH_4VeBm_OMyjPTKRQKvRtwODiz7n8MTBXprQrXpni8
reserved2
reserved2
reserved3
reserved3
I will try it when I get home
I do not understand. Yesterday I downloaded V2 version. Today, there are no versions of V2. What's the last one?
regards,
zlihtar
zlihtar2 said:
I do not understand. Yesterday I downloaded V2 version. Today, there are no versions of V2. What's the last one?
regards,
zlihtar
Click to expand...
Click to collapse
Did you get it to boot?
Because I can't
zlihtar2 said:
I do not understand. Yesterday I downloaded V2 version. Today, there are no versions of V2. What's the last one?
regards,
zlihtar
Click to expand...
Click to collapse
This would be the V3 but I remade it from scratch and I put V1.This is the latest one.
Benfatica said:
Did you get it to boot?
Because I can't
Click to expand...
Click to collapse
Did yo u install the modded recovery? And why arent u responding on Tele?
victorAndrie said:
Did yo u install the modded recovery? And why arent u responding on Tele?
Click to expand...
Click to collapse
I had to reset my phone and I forgot to install Tele
Benfatica said:
I had to reset my phone and I forgot to install Tele
Click to expand...
Click to collapse
Ok
victorAndrie said:
Ok
Click to expand...
Click to collapse
I will install it when I get home
---------- Post added at 08:39 AM ---------- Previous post was at 08:08 AM ----------
victorAndrie said:
Ok
Click to expand...
Click to collapse
I just tried it but got a black screen again
Has anyone tried yet? Benfatica, what is your version J330F or J330FN?
Thanks,
regards
zlihtar2 said:
Has anyone tried yet? Benfatica, what is your version J330F or J330FN?
Thanks,
regards
Click to expand...
Click to collapse
it's the FN version
hello , after instalation my phone don't boot
Edit : the bootlogo don't boot
ExtremeGrief said:
Did yo u install the modded recovery? And why arent u responding on Tele?
Click to expand...
Click to collapse
same cant boot just black screen
how to instal moded twrp ? I used normal twrp
I tried install moded recovery with adb but phone wont boot up into recovery mode
All the links are dead
Hello developer! Please help fix link download rom.
nil2009 said:
Hello developer! Please help fix link download rom.
Click to expand...
Click to collapse
This rom has been abandoned. The chances of the download link being fixed are very low.
Will there be a version for j327p???

Categories

Resources