Unable to install ROM/update recovery? - OnePlus 2 Q&A, Help & Troubleshooting

Heya guys, I've been rocking my OnePlus 2 for a while. I was wanting to install a newer ROM on it but I seem to run into some problems and I just can't figure it out.
I tried to install several roms (which are all based on 7.1 android) and I seem to be getting the same error on all of them: E:Error executing updater binary in zip '/sdcard/crDroidAndroid-7.1-20161128-oneplus2.zip' This was when I tried the crDroid mod, of course. The only ones that seem to work are CM13 and OxygenOS 2.2.
Couldn't really find a good solution for this when I google'd. I tried carefully wiping what I had to but that didn't seem to help.
I also tried updating my recovery, but when I try to update my recovery it just freezes when I boot. I tried this using fastboot and or via TWRP. I'm currently using version 2.8.7.0 of TWRP because the lastest version of TWRP bricks my recovery. I've also tried the blue spark TWRP and TWRP-hybrid, they don't seem to work either, my phone just stays on the 1+ logo. I have to flash the old version of TWRP back onto it using fastboot to get a working recovery.
Anyone have a solution for me?
EDIT: I have a Chinese OnePlus2, the A2001.
EDIT2: Forgot to mention something that might be critical to the problem: I did update from OxygenOS 2.2.1 to the latest as of now, 3.1. This removed my TWRP recovery and I couldn't get the new one to work, which made me install 2.2.1 again. I've seen people mention some problems with 3.1 so this might be the cause of it?

Related

Old Oneplus two Update how to

Hey Guys,
i need help updating and old One Plus 2. I bought it and rooted it thereafter.
I now want to update it, if possible without full reset, but if needed i will do it.
The Problem is, when i try to Update via OTA i get an error regarding crc hashes .....
This could be the Problem because im using the TWRP Recovery. Now i heard there could be Problems trying it with TWRP.
Maybe you can help me do the right steps.
Version Infos.
What i tried was, trying to flash the ROM via twrp using the downloaded zip. But it didnt work either...
I appreciate any help.
Thanks dQ
Which ROM you tried to flash?
Which ROM you are currently on?
You tried clean flash or dirty flash?
I tried to update via OTA, but since I rooted it with supersu (the normal way which i found at oneplus)
Its not working.
So what i did yesterday was, updating twrp to the newest version. Now im downloading the oxygen oa 3.1.0 OTA Update.
Trying to flash this is my next plan.
Ota updates tried was dirty ofcourse.
I didnt flash anything other then the downloaded zip files but these twrp didnt flash because of error. So he didnt do anything.

P9 Bootloop after installing 'Elite Kernel', but can still use ADB and fastboot

Hello. a little while ago I restored my Huawei p9 lite nougat L31C440B380 rom from a bootloop thanks to tw1st3d83's P9 Lite Toolkit but since then i haven't been able root it again properly using magisk and other supersu apps because when i boot up music and sound don't play on my apps and videos on apps don't work at all, yet when i unroot my phone works normally, which is strange as i've rooted many times before with no problems. I'd been having some issues with magisk then due to installing and then deleting the viper4arise mod as apps didn't show in my drawer and magisk modules as well as the manager started to malfunction frequently. I looked around for anything that might help me fix this and came across HassanMirza01's P9 Lite elite kernel (All Variants CxxB3xx Phh Superuser v9 version and MagiskSU v10 version based on the b380 Rom) and decided to try it out. I used a special modded version of oldroid's twrp (TeamElite) https://www.androidfilehost.com/?fid=889764386195914200 to flash the kernels, the phh Superuser 9 version, https://www.androidfilehost.com/?fid=529152257862726224 , and the magiskSU 10 version, https://www.androidfilehost.com/?fid...0096634768996. Because they were pre-rooted, I assumed at the time i'd be able to solve my root problem.
When i was using the kernel I noticed everything ran more smoothly than usual but sound and video still weren't working. Because the kernels were pre-rooted before i installed, i think they may have modified the boot image in such a way that even when i completely format data with twrp and do an advanced wipe, then restore the factory images including the stock boot image i extracted from the B380 rom it starts up normally but gets stuck on the loading screen. At first I thought it needed time to load so I left it to charge overnight as the battery was pretty low but i when i woke up the next morning it was still on the Huawei logo. i don't think the kernel has an uninstaller or if there's one i can flash that doesn't have root. If i flash the boot image that I patched earlier with magisk, everything loads fine but i'm still faced with the same problems with no video or sound. I've been thinking of just reflashing the stock images and then relock the bootloader so i can do three button "dload" method for a clean install of my B380 rom as i've tried to use it before and failed as i get this error message before it finishes:
write radio image...
32K crc checked failure
E:unknown command [errno]
update_huawei_pkg_from_ota_zip: update from zip failed
Updater process ended with ERROR: 7
But seeing as how the kernel has altered the boot image I can only use the boot image that I patched with magisk or supersu.
I'm definitely sure that the method won't be able to work on a phone that's rooted but what i'm more worried about is that something goes wrong and i end up in a bootloop with no way to use adb to unlock the bootloader or use recovery, pretty much bricking the device. I've looked around for other kernels i might be able to flash and restore my device like Smoky Kernel and Rusty Kernel but they didn't work at all as opposed to the Elite Kernel. Can I lock the bootloader with a rooted phone and my reinstall my stock rom with the three button method or is there another way i could go about this? I'm asking this way because every time i unroot with either magisksu elite kernel or my magisk boot image the phone will always bootloop. The TWRP version I'm on, 3.1.1-0 isn't very useful at the moment compared to when I was on MM because when I had a problem I just flash and forget, but as the stock rom has two files it's a bit harder for me to get the hang of it so i would be very grateful for where to go from here.

OnePlus 5 stuck on stock rom after trying brick cant flash anything now

So im trying to root my oneplus 5 and i started off by using Lineage OS but i wasnt too happy with it and i liked Oxygen OS much better so i decided to go back to it and while doing so like an idiot i wiped everything in twrp including the storage with all my ROM files and the phone was bricked and after a long struggle i used the unbrick tool which is called MSM tool which installed oxygen 4.5.8 using some some Qualcomm mode or something and it booted and worked fine but ever since i wasnt able to download the oxygen 5.1.1 update through the phones update section, it reaches 100% and says signature verification failed and goes back to 5%. So i tried downloading the latest Open Beta from the OP site and tried local upgrade which said installation failed so i try installing it locally through the Oxygen Recovery but again Installation failed so i try unlocking the bootloader again and installing it through twrp and it just keeps showing the boot animation forever( i know people say be patient but i waited for 20 mins+). So i decided to use the unbrick tool again and now im stuck on the OOS 4.5.8 unable to update the phone.
I tried to flash the latest oreo through twrp several times and just tried flashing it through so many ways where none worked , even adb sideloading it worked till 47% and said installation failed and everytime this happens i have nothing left to do but use the tool and unbrick it again and this takes so much time as i have to unbrick and then do the first setup and then go to fastboot and unlock the bootloader and do the setup again and transfer the files and then install twrp and flash.
Nothing has worked so far
And now even when i go back to the 4.5.8 stock after unbricking for some reason it just doesnt connect to any wifi , it just says Connecting and then saved and then disabled and repeat, only my mobile data works.
I tried to flash lineage again but got an error 7 with it or something and im back to the stock unbricked state without wifi and all i can do is unlock bootloader and install twrp.
If anybody has any suggestions and can help me please do so immediately. I require my phone urgently and need to fix this fast.
Thank You !
(btw im in India and do local service centres fix such issues?)
Make sure you use newest twrp. And also flash firmware for 5.1.1
Vika__ said:
Make sure you use newest twrp. And also flash firmware for 5.1.1
Click to expand...
Click to collapse
i am using the latest codeworkx twrp 3.2.1 and when should i flash firmware? can you just give the process i should do? stuck at 4.5.8 without wifi with twrp and unlocked bootloader
Wipe everything except internal storage, after that click format data and type "yes" to accept. Then download oos 5.1.0 firmware from here https://sourceforge.net/projects/cheeseburgerdumplings/files/15.1/cheeseburger/firmware/ and lineageos 15 (or any rom you want now), gapps and move all 3 packages to your phone. Flash firmware first and then reboot to recovery. Then flash rom or gapps and reboot
You have to flash the latest TWRP from twrp.me, then download the latest OxygenOS build. Reboot into TWRP, wipe data, cache, system and flash the latest build, then just go to wipe > format data, type "yes" and reboot
Lol man your OP5 is not bricked, if you can boot on TWRP, you can install all that you want
I advise to Format Data/Storage, Wipe everything and install xXx 10.7 (OOS Custom with a great Aroma installer), choose decrypted, it's better if you want swtich rom in the future AOSP > OOS > AOSP
bro i have same probleme after install any rom custom or official , always stuck on boot logo , any solution ?
no solution??

HELP No recovery, usb not recognized

Its a shame.
7 years unlocking bootloaders, installing CWM or TWRP or Philz recovery, flashing rom after rom, not even one device bricked, and today, i messed up, i hope its not bad.
So the short version of what i did is that i flashed twrp.img trough and older version of twrp and now it wont boot into twrp, it says that it failed to verify the recovery image or something like that, and my laptop wont recognize the cellphone, the cellphone boots into the latest Havoc rom but without Gapps and without root because i did not install it beforehand, when in bootloader mode it just says that it could not recognize the device.
The long version is that i had Resurrection Remix, obviously an unlock bootloader, magisk etc... everything was fine until today that i tried to install Havoc, the installation went well but i found out that ambient display was not working, someone told me that the previous version of Havoc did not had that problem so i tried to flash it but it bootlooped for like 1hr, so i read that the version of TWRP provided by the OP was the way to get it to work, i downloaded the .img file and flashed it trough TWRP and tried to install Havoc again but i was stuck in a bootloop, so i flashed the latest Havoc build so i could download the latest version of twrp, i did not flash Gapps or Magisk because i was going to re flash the rom and then flash Gapps and magisk, so i downloaded TWRP and flashed trough TWRP and thats when the sh$& hit the fan, now it wont boot into TRWP and my laptop wont recognize the device, neither on android nor in bootloader mode.
So, thank you guys in advance for your help, tomorrow im going to try on a computer at my work and see if its my computer and if not, well, ill have to se what you geniuses come up with. thank you so much again.
Info:
Rom build number: opm6.171017.030.h1 or 20180811 android 8.1.0
TWRP: i started with 3.2.2-0 then i downgraded to 3.2.1-0 and the one that messed up everything was 3.2.3-0
By the way, I have a full twrp backup of when my phone was stock, (but no way to use it) T_T

TWRP Keep Vanished after reboot or installing any custom rom Mi9T

Dear good people, I am here with a problem. with my mi 9t after got my boot loader unlock yesterday, tried installing TWRP and succeed to install with ADB command. My Actual OS was 11.2.0 Global stable version.
However, whenever I tried to install any custom rom or any kind of rom though it, its shows installed but whenever i am reboot it , it vanishing and directly go to fastboot. ( Before I do the reboot, it shows "there is no OS on your system").
Please help me guys
You need to flash vbmeta along with the recovery, that should solve it
Are you using official twrp? There are several unofficial ones floating around that can give you this problem on 11.x, but I never had it with the official one (and I didn't flash vbmeta)

Categories

Resources