Related
Dear All,
Apologies if I miss out any formalities or other such requirements for the forum, but I am a complete noob and was advised to ask on this community.
I have had the HTC magic for almost a year and a half now, and in June of this year decided to put a custom ROM onto my handset as I was bored with the stock android and Vodafone weren't offering the newer android updates and features!
This had worked fine until yesterday when my phone decided it would freeze in my pocket. As a result of this, I pulled the battery out of the back as it was completely unresponsive and attempted to turn the device back on. When i pulled the phone out of my pocket 5 minutes later( it always took forever to load so I used to just put it down and let it do its thing) it was stuck on the final screen of the boot sequence. I once again pulled the battery out and tried again, only to this time watch the same event happen. I have tried multiple times since and the same thing keeps on happening.
After looking back into how I put on the custom rom in the first place ( I don't play around with my phones software that much, so had completely forgotten if I'm honest) and talking to a friend who is more into these kind of things, I tried to boot the phone into recovery mode (using power and home?) but was met with an icon of a phone and an exclamation mark in a triangle on a black screen. My friend advised me to once again flash on the recovery image of 'recovery-RA-sapphire-v1.7.0G.img' using 'fastboot' through terminal, and then just re-install a ROM. After typing in 'fastboot flash recovery recovery-RA-sapphire-v1.7.0G.img' i retained the following error in terminal.
ERROR: could not get pipe properties
sending 'recovery' (4520 KB)... OKAY
writing 'recovery'... INFOsignature checking...
FAILED (remote: signature verify fail)
I don't believe the pipe properties error is relevant as it comes up even when the phone is not connected to the computer, but I'm not completely sure.
Information about my phone and set-up taken from fastboot menu on device and basic knowledge.
HTC Magic - Vodafone & Google Branded
UK Model.
Sapphire PVT 32B Ship S-on G
Hboot -1.33.0004 (SAPP1000)
CPLD - 10
Radio - 2.22.12.261
Apr 9 2009 23:30:40
Computer
iMac Late 2009 model
OS X 10.6 Snow Leopard
The ROM I originally put on I think was 'KiNgxKxlick-Legend2G1-v12_sign.zip' but I am not completely sure about that.
All help to get any ROM on my phone, be it the original stock or any other just to make it so I can make basic phone calls and texts til the end of my contract, would be more than greatly appreciated!
Thank you.
Josh
Find the sappimg.nbh file for 32b and hboot(volume down and power) back to stock. Then reroot I think androot will work and flash clockwork recovery through rom manager (in the market). Find a 32b rom here in the stickys and flash away.
Sent from my HTC Magic SparksMod using XDA App
You can't flash a recovery image via fastboot because after you rooted it you didn't flash an engineering SPL.
So you'll need to find a sappimg.nhb for the vodafone magic.
Thanks very much for the fast response guys.
i attempted to fastboot on a Sappimg called vf-sappimg-crc24-1.33.0007.nbh from xda (would post a link, but cannot due to noob rule) but i got the following error in terminal
sending 'nbh' (97795 KB)... OKAY
writing 'nbh'... INFOadopting the signature contained in this image...
INFOsignature checking...
INFOnbh header checking...
INFOnbh header parsing...
INFOchecksum checking...
INFOchecking model ID...
INFOchecking custom ID...
FAILED (remote: custom id check fail)
Anyone know what the problem is? Sorry if i'm being stupid and its really obvious
Well, I accidentally flash a 32A SPL on my 32B myTouch.
Good thing (may be) is I still can access to fastboot.
Bad thing is it turned to S-ON & I can't boot to recovery.
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (SAPP30000)
CPLD-10
RADIO-6.35.16.19
I searched most of related topics in xda but could not find any clear solution yet.
Please help me what to do to recover my beloved Sapphire.
then use eyegors tool to flash
http://forum.xda-developers.com/showthread.php?t=794450
camapghe said:
Well, I accidentally flash a 32A SPL on my 32B myTouch.
Good thing (may be) is I still can access to fastboot.
Bad thing is it turned to S-ON & I can't boot to recovery.
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (SAPP30000)
CPLD-10
RADIO-6.35.16.19
I searched most of related topics in xda but could not find any clear solution yet.
Please help me what to do to recover my beloved Sapphire.
Click to expand...
Click to collapse
If you can fastboot, you need to flash a 1.76... SPL to go with your 6.35 radio like 1.76.2007.
fastboot flash hboot hboot-1.76.2007.img
Might be due to S-ON, it won't allow me to write any SPL, radio or recovery img. When I used the Radio Switcher, it said failure. When I used adb, it said "signature verify fail".
I even tried to use SAPPIMG.nhb but it stucked at radio update.
The last hope there is I still can access to the holy fastboot.
Please help me, guys.
camapghe said:
Might be due to S-ON, it won't allow me to write any SPL, radio or recovery img. When I used the Radio Switcher, it said failure. When I used adb, it said "signature verify fail".
I even tried to use SAPPIMG.nhb but it stucked at radio update.
The last hope there is I still can access to the holy fastboot.
Please help me, guys.
Click to expand...
Click to collapse
From fastboot try fastboot boot recovery newrecoveryname.img
Then from there restore backup or backup then reflash spl
Sent from my Gingerbread on Sapphire using XDA App
ADB said booting ok, but stuck at MyTouch3G screen. Any solution guys?
Wrong section!
Do NOT post in Development unless you have developed something!
camapghe said:
ADB said booting ok, but stuck at MyTouch3G screen. Any solution guys?
Click to expand...
Click to collapse
Checkout the stickies
Sent from my Gingerbread on Sapphire using XDA App
camapghe said:
SAPPHIRE PVT 32A SHIP S-ON H
HBOOT-1.33.0009 (SAPP30000)
CPLD-10
RADIO-6.35.16.19
Click to expand...
Click to collapse
1)See the radio version... thats for the 32A devices... big no-no
2)see the spl... there is a mismatch between the spl and radio... second big no-no.
3) see the 32A... it should be 32B.. third big no-no
The only way you can flash anything is by flashing a matching spl, so the radio and spl can work together.. from there you flash a different combo to match the device you have. The problem is you have s-on, the forth no-no, which complicates thing further...
In other words, you are in deep sh't :0|
You are not completely bricked... but you are very close to...
The fix:
It's a very dangerous approach... post here if you are willing to take a major risk :0)
Thanks mumilover.
I do know that I'm in deep deep Sh!T.
Please post your solution, as I consider my phone in dead anyway now. Can take any risk for testing purpose
Start with these commands:
Code:
fastboot getvar version-main
fastboot oem h
Post back the results
Hey,
as described here I've got the same problem as camapghe. I'm very intrested in hearing this dangerous approach. So please tell us.
Here is the requested output from my device:
Code:
-bash-4.1$ fastboot getvar version-main
version-main: 1.89.162.1
-bash-4.1$ fastboot oem h
... INFOcommand list
INFOkeytest
INFOheap
INFOboot
INFOreset
INFOpowerdown
INFOrebootRUU
INFOtask
INFOrtask
OKAY
-bash-4.1$
The thing is, i got my magic stolen... so it's very hard for me to tell you all the steps from memory... so.. i just pm'ed you my email so we can do it together over gtalk :0)
Code:
fastboot getvar version-main
version-main: 1.88.531.1
fastboot oem h
...
(bootloader) command list
(bootloader) keytest
(bootloader) heap
(bootloader) boot
(bootloader) reset
(bootloader) powerdown
(bootloader) rebootRUU
(bootloader) task
(bootloader) rtask
Then, what should I do now?
@ mumilover: I sent you my gmail contact
Guys, I think the danger approach original guide is
HERE
@mumilover: please have a look at this link & confirm what should us (me & Crazy_Scientist) should do next. I'm dare NOT to try any more without guidance from professional.
Update 1:
I just tried a bit & confirmed that I CAN boot in rebootRUU. Waiting for mumilover's guide.
Update 2:
Now stuck in RUU mode. Feel like I'm r*ping my phone's corpse. Ha ha ha.
The guide you referring to has a set of well known commands, like the sd-card enabler and flash of misc partition.
But it does not help us in your case.
What i want to do is something else... i want to flash a RUU using a goldcard.. but while the device is flashing we take out the battery in the right moment... this way we force to flash the only spl... this way we gain a matching combo, and then try to forcefully boot the device... it will not succeed to boot all the way, but i will give us some time to try a different approach :0)
PS: i got your pm, but the time difference makes it a little hard to communicate :0|
So, that will be the idea. I think I know what to do.
But I don't have any RUU img with good SPL yet. If you know any, please provide me the link. Thanks.
Besides, from the command in fastboot, I found that I always stuck at radio point 97 when updating radio. The rest will be ok.
What I want to ask is there any sappimg that can update without / bypassing radio update?
camapghe said:
So, that will be the idea. I think I know what to do.
But I don't have any RUU img with good SPL yet. If you know any, please provide me the link. Thanks.
Besides, from the command in fastboot, I found that I always stuck at radio point 97 when updating radio. The rest will be ok.
What I want to ask is there any sappimg that can update without / bypassing radio update?
Click to expand...
Click to collapse
Not a sappimg, the second part of the sappimg flash process is going to be the radio. AFAIK, there is no way to bypass this.
And Crazy_Scientist is back to life running CM and enjoying his non-brick :0)
It took 3 hours to get him back to a running system, and 7.5 min to root and flash custom rom hihihihi
camapghe please post here so i can see you still active or not... no logic in writing the solution if the OP is absent :0)
And just as a side-note, every sappimg.(nbh|zip) has it's own flash order... so the trick is to flash a sappimg which flashes the spl before the radio... and stop it before it updates the version-main nr, so we can flash a different sappimg just after it without the need to change the misc partition.
I have a 32A mytouch 1.2 and i accidently flashed 1.76.0008 and the new radio. now i can really do anything cant revert back nor can it flash anything in HBOOT i either get main version is old (i think, says main version is...) i tried gold carding it doesn't work still get the same message redid my goldcard and still nothing. any way to revive my phone without jtah sincei can still access flashboot and what not.
SPL/hboot version: 1.76.0008.
Radio version: 6.35.08.29.
Main software version: 2.53.707.2.
cid: t-mob010.
cpld: 13.
product: sapphire.
mid: sapp31000.
security: on.
build-mode: ship.
Upload of untouched lollipop OTA for single sim EU.
OTA_A51_UL_L50_DESIRE_SENSE60_MR_HTC_Europe_2.10.401.2_R-1.29.401.5_release_453051
not working on my 820n
emilutzzu said:
not working on my 820n
Click to expand...
Click to collapse
I think you must have:
- os-1.29.401.5
- locked bootloader
- software status: official (reported in bootloader)
Yes, this version works only on os-1.29.401. with locked or relocked bootloader. I testet it, no way around. We have to wait for the OTA for os-1.18.... or am customrom, made out of an OTA.
How to install it manually ??
moatazabououf said:
How to install it manually ??
Click to expand...
Click to collapse
Rename it to 0PFJIMG.zip, put it on your external sd card, boot into bootloader with volume - and power button. it will read the zip, and if it compatibel with your os it will aupgrade and you have to confirm with your buttons.
If you have a unlocked bootloader, relock it first.
Four download attempts failed!
Somebody pls upload it in 3-4 pieces.
uploaded to mega
tomal said:
Four download attempts failed!
Somebody pls upload it in 3-4 pieces.
Click to expand...
Click to collapse
hey bro...here is a link to mega https://mega.nz/#!HAFh3ShS!ZMvKhlnLDVKXgk5Zs8Pnox_SLMOTtSdJOtb12xAxIEg
---------- Post added at 04:16 PM ---------- Previous post was at 04:03 PM ----------
cr3h said:
I think you must have:
- os-1.29.401.5
- locked bootloader
- software status: official (reported in bootloader)
Click to expand...
Click to collapse
i got
- os-1.29.401.5
-relocked bootloader
and i tried to move on SD card and rename the file with 0PFJIMG.zip ,when i start HBOOT on the right side of my screen it show a blue bar moving up and then after i wait 5 min i got the message <press power button to restart> but nothig,i have the same android version
emilutzzu said:
hey bro...here is a link to mega https://mega.nz/#!HAFh3ShS!ZMvKhlnLDVKXgk5Zs8Pnox_SLMOTtSdJOtb12xAxIEg
---------- Post added at 04:16 PM ---------- Previous post was at 04:03 PM ----------
i got
- os-1.29.401.5
-relocked bootloader
and i tried to move on SD card and rename the file with 0PFJIMG.zip ,when i start HBOOT on the right side of my screen it show a blue bar moving up and then after i wait 5 min i got the message <press power button to restart> but nothig,i have the same android version
Click to expand...
Click to collapse
I think you have a CID from Orange. Like my phone. You have to wait for the update from Orange in your country, or maybe a custom rom comes out before, ore you make your phone s-off and supercid, than you can install every rom from every country and every provider.
i got
- os-1.29.401.5
-relocked bootloader
and i tried to move on SD card and rename the file with 0PFJIMG.zip ,when i start HBOOT on the right side of my screen it show a blue bar moving up and then after i wait 5 min i got the message <press power button to restart> but nothig,i have the same android version
NOTE : MY CID HTC__J15 .... so everything is okay
Hi,
Htc__j15 is the cid for the middle east. The OTA here on top of the thread is the europe version. Doesnt mach.
Oel said:
Hi,
Htc__j15 is the cid for the middle east. The OTA here on top of the thread is the europe version. Doesnt mach.
Click to expand...
Click to collapse
The OTA is for :
"HTC__001", "HTC__J15", "HTC__102", "HTC__A07", "HTC__M27", "HTC__002","HTC__032", "HTC__016", "HTC__031", "HTC__Y13"
but the (pre)build fingerprint has to be matched.
Htc desire 820_A51_UL
hello all
I need firmware for htc desire 820 . the phone is keep restarting on logo.
here is logo
A51_UL PVT SHIP S-ON
HBOOT-3.19.0.0000
RADIO-01.01.010_U10305041_08.01.50512
OS 3.17.401.3
eMMC-boot 2048MB oc
Apr 11, 2016, 11:54:47.0
IMEI:357586060443287
SN:CC52PYC00214
MB:427LF52M00810
Please Help
Thank
safwan.it said:
hello all
I need firmware for htc desire 820 . the phone is keep restarting on logo.
here is logo
A51_UL PVT SHIP S-ON
HBOOT-3.19.0.0000
RADIO-01.01.010_U10305041_08.01.50512
OS 3.17.401.3
eMMC-boot 2048MB oc
Apr 11, 2016, 11:54:47.0
IMEI:357586060443287
SN:CC52PYC00214
MB:427LF52M00810
Please Help
Thank
Click to expand...
Click to collapse
1.Tighten two volume buttons and the power button when you see a black screen and holding down the volume- and power button that would go to bootloader.Telefon must be connected to kompyuteru, to go to the boot loader, reboot. 2.custom 5.0.2 https://yadi.sk/d/dEwiblxjmieVS 3.In your theme! http://forum.xda-developers.com/desire-820/help/update-modified-5-0-2-euro-firmware-t3376130
Htc desire 820_A51_UL
vuk1963 said:
1.Tighten two volume buttons and the power button when you see a black screen and holding down the volume- and power button that would go to bootloader.Telefon must be connected to kompyuteru, to go to the boot loader, boot into download sistem. 2.custom 5.0.2 https://yadi.sk/d/dEwiblxjmieVS 3.In your theme! http://forum.xda-developers.com/desire-820/help/update-modified-5-0-2-euro-firmware-t3376130
Click to expand...
Click to collapse
hello
I need firmware for htc desire 820 . the phone is keep restarting on logo.
fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 3.19.0.0000
(bootloader) version-baseband: 01.01.010_U10305041_08.01.50512
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.17.401.3
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: CC52PYC00214
(bootloader) imei: 357586060443287
(bootloader) imei2: Not Support
(bootloader) meid: 00000000000000
(bootloader) product: a51_ul
(bootloader) platform: hTCBmsm8939
(bootloader) modelid: 0PFJ40000
(bootloader) cidnum: HTC__032
(bootloader) battery-status: good
(bootloader) battery-voltage: 0mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: 1be89947
i have the same problem i need this file plz
"0pfjimg_a51ul_l50_desire_sense60_mr_orange_er_2.10.75.4_radio_01.01.010_u1035041_08.01.50512__combined_signed.zip"
drgaax said:
i have the same problem i need this file plz
"0pfjimg_a51ul_l50_desire_sense60_mr_orange_er_2.10.75.4_radio_01.01.010_u1035041_08.01.50512__combined_signed.zip"
Click to expand...
Click to collapse
Somewhere here: http://www.easy-firmware.com/index.php?a=browse&b=category&id=5
vuk1963 said:
Somewhere here: http://www.easy-firmware.com/index.php?a=browse&b=category&id=5
Click to expand...
Click to collapse
Suuure its there but its a payed file....... there is no way to get it for free ?
cr3h said:
I think you must have:
- os-1.29.401.5
- locked bootloader
- software status: official (reported in bootloader)
Click to expand...
Click to collapse
Hey, i have htc d820 n and it's stuck on htc logo n keeps on restarting, won't enter recovery
Software status :modified
Relocked
A51_ul pvt ship s-off
Cid-11111111
Hboot-3.19.0.0000
Radio-01.01.010_
Os-2.10.401.2
eMMC-boot 2048MB OC
SEP 25 2015,18:09:22.90028772
Can somebody update link? Because i looking for this update because my htc 820n can't update to lollipop via wifi :/ Hi found firmware dowload it install but after auto reboot shows 4.4.4 kitkat rom :/ Thanks for help
Hello, I posted my problem in the general Q&A section but I get no respons there. I don't know how to move it here so I have to post it a second time here. Sorry for that.
I have the following problem with my Moto X Style.
Out of couriousity I took a look at the screen via *#*#4636#*#* I didn't think it was possible to change anything here but problably it is because since then i'm unable to sent or receive phone calls.
4G data connecion works fine though.
Strange thing is, although I buoght the phone in The Netherlands, I can only select the US radioband in this screen. Is it possible to change this somehow to Dutch again?
The 'pereferred network' is set to LTE/UMTS auto (PRL). I'm not sure if that is the right one for the netherlands but I haven't found the one that works.
Thank you,
Marco275 said:
Hello, I posted my problem in the general Q&A section but I get no respons there. I don't know how to move it here so I have to post it a second time here. Sorry for that.
I have the following problem with my Moto X Style.
Out of couriousity I took a look at the screen via *#*#4636#*#* I didn't think it was possible to change anything here but problably it is because since then i'm unable to sent or receive phone calls.
4G data connecion works fine though.
Strange thing is, although I buoght the phone in The Netherlands, I can only select the US radioband in this screen. Is it possible to change this somehow to Dutch again?
The 'pereferred network' is set to LTE/UMTS auto (PRL). I'm not sure if that is the right one for the netherlands but I haven't found the one that works.
Thank you,
Click to expand...
Click to collapse
This post intrigues me... You have a Moto X Style (XT1572) not a Moto X Pure (XT1575)? The Style never was sold in the US, so you shouldn't have US band selection at all. My fear is you bought a Style someone borked up by flashing a different region's variant ROM to the device, sometimes it is impossible to get back to the correct one.
Can you post the output of 'fastboot getvar all' but mask out the IMEI/SN please?
acejavelin said:
This post intrigues me... You have a Moto X Style (XT1572) not a Moto X Pure (XT1575)? The Style never was sold in the US, so you shouldn't have US band selection at all. My fear is you bought a Style someone borked up by flashing a different region's variant ROM to the device, sometimes it is impossible to get back to the correct one.
Can you post the output of 'fastboot getvar all' but mask out the IMEI/SN please?
Click to expand...
Click to collapse
Hello acejavelin, thanks for your response.
Yes, I have the XT1572. (Style) I bought it new from a legit Dutch retailer. The phone always worked fine untit I couldn't keep my fingers from the *#*#4636#*#* screen. :angel:
In this screen I can select preferred network which says LTE/UTMS auto (PRL). If I change this it automatically returns to this setting.
When I press the 3 dots in the upper right corner I can sellect mode for radio band. But here only the United States is shown.
I made screenshots of all the relevant screens but when I want to upload a pic I get an URL.
Here is the result of what you asked me.
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8992-A0.52
(bootloader) product: clark
(bootloader) board: clark
(bootloader) secure: yes
(bootloader) hwrev: 0x83C0
(bootloader) radio: 0x1
(bootloader) emmc: 32GB Samsung REV=07 PRV=02 TYPE=57 PNM=BWBD3R
(bootloader) ram[0]: 3072MB Samsung S8 SDRAM DIE=6Gb M5=x1 M6=x5 M7=x0 M
(bootloader) ram[1]: 8=x3B
(bootloader) cpu: MSM8992
(bootloader) serialno: TA*********
(bootloader) cid: 0x0007
(bootloader) channelid: 0x42
(bootloader) uid: 256FE9001E000000000000000000
(bootloader) unlocked: no
(bootloader) securestate: locked
(bootloader) iswarrantyvoid: no
(bootloader) mot_sst: 0
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei: 35*************
(bootloader) meid:
(bootloader) date: 11-14-2015
(bootloader) sku: XT1572
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Sun Aug 26 16:39:27 UTC 2018"
(bootloader) ro.build.fingerprint[0]: motorola/clark_reteu/clark:7.0/NPH
(bootloader) ro.build.fingerprint[1]: S25.200-15-8/6:user/release-keys
(bootloader) ro.build.version.full[0]: Blur_Version.25.211.8.clark_reteu
(bootloader) ro.build.version.full[1]: .reteu.en.EU
(bootloader) ro.build.version.qcom: <not found>
(bootloader) version-baseband[0]: M8992_1255331.29.01.88.09R CLARK_EMEA_
(bootloader) version-baseband[1]: CUST
(bootloader) kernel.version[0]: Linux version 3.10.84-perf-g6349ca9 (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9 201501
(bootloader) kernel.version[2]: 23 (prerelease) (GCC) ) #1 SMP PREEMPT M
(bootloader) kernel.version[3]: on Oct 23 08:09:25 CDT 2017
(bootloader) sbl1.git: git=MBM-NG-VA0.52-0-g17b2538
(bootloader) rpm.git: git=90a41be
(bootloader) tz.git: git=2d08904-dirty
(bootloader) hyp.git: git=2d08904-dirty
(bootloader) sdi.git: git=d9f358f
(bootloader) pmic.git: git=MBM-NG-VA0.52-0-g17b2538
(bootloader) aboot.git: git=MBM-NG-VA0.52-0-g69ca042
(bootloader) qe: qe 0/0
(bootloader) frp-state: protected (77)
(bootloader) ro.carrier: retfr
all: listed above
Finished. Total time: 0.484s
Marco275 said:
Hello acejavelin, thanks for your response.
Yes, I have the XT1572. (Style) I bought it new from a legit Dutch retailer. The phone always worked fine untit I couldn't keep my fingers from the *#*#4636#*#* screen. :angel:
In this screen I can select preferred network which says LTE/UTMS auto (PRL). If I change this it automatically returns to this setting.
When I press the 3 dots in the upper right corner I can sellect mode for radio band. But here only the United States is shown.
I made screenshots of all the relevant screens but when I want to upload a pic I get an URL.
Here is the result of what you asked me.
(bootloader) version: 0.5
(bootloader) version-bootloader: moto-msm8992-A0.52
(bootloader) product: clark
(bootloader) board: clark
(bootloader) secure: yes
(bootloader) hwrev: 0x83C0
(bootloader) radio: 0x1
(bootloader) emmc: 32GB Samsung REV=07 PRV=02 TYPE=57 PNM=BWBD3R
(bootloader) ram[0]: 3072MB Samsung S8 SDRAM DIE=6Gb M5=x1 M6=x5 M7=x0 M
(bootloader) ram[1]: 8=x3B
(bootloader) cpu: MSM8992
(bootloader) serialno: TA*********
(bootloader) cid: 0x0007
(bootloader) channelid: 0x42
(bootloader) uid: 256FE9001E000000000000000000
(bootloader) unlocked: no
(bootloader) securestate: locked
(bootloader) iswarrantyvoid: no
(bootloader) mot_sst: 0
(bootloader) max-download-size: 536870912
(bootloader) reason: Volume down key pressed
(bootloader) imei: 35*************
(bootloader) meid:
(bootloader) date: 11-14-2015
(bootloader) sku: XT1572
(bootloader) battid:
(bootloader) iccid:
(bootloader) cust_md5:
(bootloader) max-sparse-size: 268435456
(bootloader) current-time: "Sun Aug 26 16:39:27 UTC 2018"
(bootloader) ro.build.fingerprint[0]: motorola/clark_reteu/clark:7.0/NPH
(bootloader) ro.build.fingerprint[1]: S25.200-15-8/6:user/release-keys
(bootloader) ro.build.version.full[0]: Blur_Version.25.211.8.clark_reteu
(bootloader) ro.build.version.full[1]: .reteu.en.EU
(bootloader) ro.build.version.qcom: <not found>
(bootloader) version-baseband[0]: M8992_1255331.29.01.88.09R CLARK_EMEA_
(bootloader) version-baseband[1]: CUST
(bootloader) kernel.version[0]: Linux version 3.10.84-perf-g6349ca9 (hud
(bootloader) kernel.version[1]: [email protected]) (gcc version 4.9 201501
(bootloader) kernel.version[2]: 23 (prerelease) (GCC) ) #1 SMP PREEMPT M
(bootloader) kernel.version[3]: on Oct 23 08:09:25 CDT 2017
(bootloader) sbl1.git: git=MBM-NG-VA0.52-0-g17b2538
(bootloader) rpm.git: git=90a41be
(bootloader) tz.git: git=2d08904-dirty
(bootloader) hyp.git: git=2d08904-dirty
(bootloader) sdi.git: git=d9f358f
(bootloader) pmic.git: git=MBM-NG-VA0.52-0-g17b2538
(bootloader) aboot.git: git=MBM-NG-VA0.52-0-g69ca042
(bootloader) qe: qe 0/0
(bootloader) frp-state: protected (77)
(bootloader) ro.carrier: retfr
all: listed above
Finished. Total time: 0.484s
Click to expand...
Click to collapse
Ok... Guess I was barking up the wrong tree, the bootloader has never been unlocked, so it's a completely stock Retail EU/France version.
Unfortunately, I don't know how to fix this, sorry.
I'm on Nougat Asia dual SIM
As you mentioned, my radio was US, too
But mine works well, forr both call and data
acejavelin said:
Ok... Guess I was barking up the wrong tree, the bootloader has never been unlocked, so it's a completely stock Retail EU/France version.
Unfortunately, I don't know how to fix this, sorry.
Click to expand...
Click to collapse
Hi acejavelin,
Thank you, I appreciate your effort. Apparently i have to be satisfied with a tablet with a data connetion until I find the courage to switch to Lineage or somthing.
I don't see any mention of my broblem elsewhere on the internet so I guess it's not a very common problem. On other sites I asked they don't know an awnser either.
I find it weird though that an unrooted phone can be messed up simply by a software setting.
I read that with original firmware it's possible to reflash a phone using RSDLite. I looked everywhere for the firmware but until now I was not able to find a European version for the XT1572.
The only ones I could find were for the US and asian models. Maybe someone can give me a push in the right direction?
Thank you.
mr_5kool said:
I'm on Nougat Asia dual SIM
As you mentioned, my radio was US, too
But mine works well, forr both call and data
Click to expand...
Click to collapse
Oke, Maybe my problem lays elswhere then. The US band is the only one that is visible pressing the 3 dots in the upper right corner.
My phone is set on the LTE/UTMS auto (PRL) preffered NetWorktype. There are many more like TD-SCDMA/WCDMA etc. But none seem to work and the phone has always automatically returned to LTE/UTMS auto (PRL) when I close and reopen the screen.
Marco275 said:
Oke, Maybe my problem lays elswhere then. The US band is the only one that is visible pressing the 3 dots in the upper right corner.
My phone is set on the LTE/UTMS auto (PRL) preffered NetWorktype. There are many more like TD-SCDMA/WCDMA etc. But none seem to work and the phone has always automatically returned to LTE/UTMS auto (PRL) when I close and reopen the screen.
Click to expand...
Click to collapse
You're right. Some sites with Stock EU rom I bookmarked before have been dead. I did not save to drive, too. You can try other region if your phone is not cellular locked one.
mr_5kool said:
You're right. Some sites with Stock EU rom I bookmarked before have been dead. I did not save to drive, too. You can try other region if your phone is not cellular locked one.
Click to expand...
Click to collapse
Oke, thank you.
Before flashing something, have you simply tried a factory reset?
acejavelin said:
Before flashing something, have you simply tried a factory reset?
Click to expand...
Click to collapse
Yes, I did, both in andoid an in recovery. Also I whiped the cache and reset the config file from the provider. I did everything I could find on the internet about similar problems.
I also read somewhere that is is possible to only flash the modem file.
Marco275 said:
Yes, I did, both in andoid an in recovery. Also I whiped the cache and reset the config file from the provider. I did everything I could find on the internet about similar problems.
I also read somewhere that is is possible to only flash the modem file.
Click to expand...
Click to collapse
But it was working? Then nothing you could change in the 4636 menu would be permanent... Odd
No, it didn't solve the problem. I also thought nothing could be changed in the 4636 menu, but apparently it can. So people like me, who don't know what they are doing.. stay away!
Marco275 said:
Oke, Maybe my problem lays elswhere then. The US band is the only one that is visible pressing the 3 dots in the upper right corner.
My phone is set on the LTE/UTMS auto (PRL) preffered NetWorktype. There are many more like TD-SCDMA/WCDMA etc. But none seem to work and the phone has always automatically returned to LTE/UTMS auto (PRL) when I close and reopen the screen.
Click to expand...
Click to collapse
The stock EU ROM is here: https://yadi.sk/d/MCliEyCPfj7ZZ/MOTO.X3/Style/XT1572/EU
(If you still need it)
mr_5kool said:
The stock EU ROM is here: https://yadi.sk/d/MCliEyCPfj7ZZ/MOTO.X3/Style/XT1572/EU
(If you still need it)
Click to expand...
Click to collapse
Thank you. :good:
Hi to everyone
I have the following problem with my Moto X Style XT1575
Out of curiosity, I took a look at the screen via *#*#4636#*#* I didn't think it was possible to change anything here but probably it is because since then I'm unable to sent or receive phone calls.
4G data connection works fine though.