I am making this tutorial as I have had multiple versions of the LG LTE Leon and have used many firmware versions. I have created a stable method that has the least issues as I have had trouble with the latest firmware (MS34510f) disabling my root privileges. I have created a MEGA account specifically for all of the files necessary to complete this operation and have your device run smoothly. So, please follow my instructions exactly as stated and you should not have any issues. THIS PROCESS WILL REMOVE ALL DATA NOT SYNCED, DO READ BELOW NOTES IT IS VERY BENEFICIAL
Important Notes:
+This process will wipe all data that is not synced, it is important to ensure that no newer LG process are still on the device. Some might argue to leave data, to that I say good luck keeping your root and tethering without the device becoming suspiciously unstable.
+ I am not GUARANTEEING this will work on every model, but I have had an extremely high success rate with all Leon versions.
+ In this tutorial the process in which I remove Kingroot and replace it with SuperSu is for system stability. I find that most root functions I use seem to not work properly. (Wifi Tether Router and many others). So, I do recommend doing so.
+After the new OS is installed a MetroPCS splash screen will appear even if you do have T-Mobile. DO NOT BE ALARMED this firmware will not limit any functionality you had before, it will even help with tethering functionality.
Tutorial:
Let's Begin.
1. Download the link posted to obtain required files for this tutorial
Link: https://mega.nz/#F!PM4CQRqb!92kgIOnD0ZBY-8HVbtTwGQ
2. Open up LGFlashTool2014.exe
Begin by copying settings posted below, then click "normal flash"
3. Next click the "START" button
4. At this time, I recommend you verify all sync settings are to your liking and that all personal info needed is backed up
a. You have the option to throw all of your personal documents/pictures onto your SD card and removing it appropriately
(Go to: Settings - Storage - [scroll down to] Unmount SD card)
b. Next, navigate to Settings -Backup & reset [leave options default; both checked off] - Factory data reset - reset phone
c. Once reset it will most likely reboot, wipe, and then back to a OS. Now, you will Power Off entirely (make sure it is not plugged in so it will not go to charging mode)
d. Here is where we will hold down the Volume Up button with the phone unplugged from your PC. Then you must plug the USB into your phone.
e. A black screen with white text should post onto your screen, here we will continue to step 6
note: If this screen does not appear please power off and retry step d.
6. Next, follow the posted settings. Make sure to click the "Clear phone Software update Registry" button Then click "OK"
7. A new screen will arrive, and should begin the firmware download process. At this time it will take a few minute to load and should reboot to a fresh OS.
8. With the new OS in place, you can either follow the setup tutorial now or skip through for a later setup.
note: you can now insert your SD card
9. In the tools folder of the folder you downloaded copy the "mrw" folder to the Main Storage folder of your phone
10. Now copy the Kingroot apk to your downloads folder located on the main storage.
11. Go to Settings - About Phone - Software Info
At this time click the build number box a few times until it says you are a developer
12. Hit back until you are at the Setting menu, click on Developer options and check off "Stay Awake" and "Enable OEM Unlock" as well as "USB Debugging"
13. You may now run Kingroot, if it does not install root the first time it should flawlessly install the next.
14. After root is obtained, please go to your home screen and click the "Google Search" widget. Press Update Google Services and let it run. After that has been updated search for terminal emulator and install.
note: If the Play Store is acting fishy and force closing while typing in the search bar do not fret it will be fixed after reboot in further instruction
as an allternative use the jackpal.androidterm-1.0.70-71-minAPI4.apk provided in the "tools" folder
15. Open terminal and in a new window type: Su
16. Allow root usage and at this time type: sh /storage/emulated/0/mrw/root.sh
17. It will run with a few failed messages do not worry it should open SuperSu momentarily
18. Once SuperSu opens up allow it to update binaries using the "NORMAL" option but DO NOT REBOOT YET
19. At this time either download TWRP Manager from the play store or alternatively use the com.jmz.soft.twrpmanager-7.5.1.3-82-minAPI11.apk provided in the tools folder
20. Install and open TWRP Manager. Once opened click on device name and scroll until you see "LG Leon LTE (c50)"
a. Click on Recovery Version to Install and select "twrp-2.8.7.0-c50.img"
b. next click "Install Recovery" and if prompted for verification of install path and for install version select "YES" & "NORMAL"
21. After the TWRP setup is complete it may prompt you to reboot, if not click the arrow in the top left of the TWRP Manager screen and scroll down to "Reboot" and select "Reboot device"
22. After Reboot click TWRP Manager and verify a SuperSu prompt comes up if it hasn't already before the boot
At this point the device should be running smoothly. From here I prefer to do the following steps.
My Personal Setup after new install:
+Personally I like to install use a Root Uninstaller (I use 3C Toolbox Pro) and Uninstall and Backup all MetroPCS BloatWare including the Metro Browser.
+I also access the Hidden Menu by using the Dialer and Dial "2776348*#*"
- I scroll down to ApnUnlock and click to "Unlock APN"
- Then I navigate to Settings -Tethering & networks - Mobile Networks (I check off roaming data) - Access point names
--I then select the top APN and edit APN Type to: default,supl,mms,dun
---I click save from the top right selection, then turn on and off airplane mode
+If you are and Xposed user download "xposed-v79-sdk22-arm.zip","xposed-uninstaller-20150831-arm.zip", and "XposedInstaller_3.0_alpha4.apk" from: http://forum.xda-developers.com/showthread.php?t=3034811
-install the Xposed Installer, then Go to TWRP Manager, use reboot to recovery and from there click install and navigate to the "xposed-v79-sdk22-arm.zip" and install and reboot, it will reboot with a installing screen before your home screen, takes 5 minutes.
+I also use this AMAZING app "Wifi Tether Router", it is the only tethering app I use that works consistently (if you have an unlimited data plan). I get 30mbps up and down, playing many multiplayer games off my PC and PS4 averaging ping as low as 30 ! Setting I use for our device are in a post I created here: http://forum.xda-developers.com/leon/help/unlimited-metropcs-t-mobile-tether-t3290180
---------------------------------------------------------------------------------------------------------------------------------------------------------------
Special Thanks to:
MrW0lf from www.W0lfdroid.com for the Kingroot to SuperSU scrip
Numerous users on the XDA forums I pieced all of this information with
Fabio Grasso for making the amazing Wifi Tether Router
Team Win for being creating an awesome utility that has saved me from numerous bricks creating a stable method
Xposed and the creators of awesome additions such as Lolistat, Lucky Patcher, Max Lock, and SNAPPREFS
Any feedback? Did I do Okay? Questions? Let me know!
Mega link down
The mega link isn't working. Please fix it.
Hello XDA-Community,
I've got a Yoga Tab 3 Pro YT3-X90L from a customer.
He was telling me, that he wanted to unlock his device with the pattern, mismatched for several times and now its locked and requires the owners google account. Or something like that. He never had the owners google account. He told me that his seller has activated his device for him. And he has no clue who it was.
Now here is my part.
I've researched and obviously it's a FRP. The owners google account information are stored in the FRP-Partition. And this partition won't get deleted with a simple factory resett.
What i've tried so far:
1.) https://www.youtube.com/watch?v=nCzrnnh2K1w I was able to follow this tutorial to minute 9:08. But the option "Email and password" is not there anymore. I guess they patched it with 6.0.1.
2.) I tried to flash a stock rom or twrp with LenovoDownloader(QcomDLoader). The stock rom file is: Lenovo_Yoga_Tablet_3_YT3-X90L_ENG_S200028_1609230146. even its a german device this file was the only one i could find. But the LenovoDownloader won't recognize my device. The windows stays white, no entries. I guess i installed the correct driver for this device and Windows recognizes them as removable device if i plug it in via usb.
3.) I've tried to use adb and fastboot boot oem unlock. But this commands aren't working in locked state.
4.) With a trick i could open the Settings and was full of hope to active the developer options to set usb debbuging to active. But this developer options aren't available either with this "user".
5.) There is an apk for showing the "Email and password" interface. I could install it, but it force closes right after starting it.
6.) I've tried several tools to bypass this FRP: WinDroid Toolkit, D-G Unlocker, Realterm, but NOTHING.
What could i do further? I'm out of ideas right now.
I've read about a factory_update.img but i cant find anything, except the stock rom file, for this device.
Or downgrading the device, so i could use the "Email and password" but. But i can't even flash the stock rom.
Specs for the device:
Lenovo Yoga Tab 3 Pro YT3-X90L
Lenovo/YT3_l0_row_lte
6.0.1/MMB29M/LenovoYT3-X90L_S200307_170614
i appreciate any help i can get
greets
redplate
I've wrote it down. Hope this helps.
Situation:
"Confirm account: The device has been reset. To continue, sign in with a Google Account that was previously synced on this device. "
Explanation:
The device has been blocked by repeated input of the wrong password, pattern, etc. and can only be unlocked with the Google account of the owner.
A factory reset or hard reset does not help here, as the account information is saved in its own FRP partition and will not be deleted when the factory state is restored.
Solution:
1. Connect device to a Wi-Fi and Internet access.
2. Before confirming "Next", select another hotspot here
3. Go to "Advanced Settings" and change the proxy settings of any hotspot to Manual.
4. In the text input field of the proxy settings you enter now any word: e.g. Test
5. Now mark this word and select "Assist" in the context menu.
6. Selecting this "Assist" option opens the Google search application.
7. You can now not only browse the Internet through this search, but also search for and open installed programs.
8. We are looking for Chrome, open the internet browser, go to www.google.com and search for DPC test.
Link: https://www.apkmirror.com/apk/sampl...-release/test-dpc-4-0-6-android-apk-download/
9. After downloading this application, go back to the Google search application.
10. Here we enter "Download" to search for the download application.
11. In Downloads we can now find and install the downloaded app.
12. To allow the installation of this .apk, you must allow the installation of "unknown sources" in the settings.
13. Either you go here on the installation itself on "Settings", or you search for "Settings" on the Google search app.
14. After completing the installation of the DPC-Test program, start it with "Open".
15. The app itself is will register as a device owner and now allows us to set up a new Google Account as owner.
16. If this is set up, it will also be included in the FRP partition.
17. In the event of a new factory reset, the device is reset, the DPC-Test program is removed and the device can be freshly set up in the factory settings.
after the takeover of the owner, the reason for blocking the device was not present anymore and the old owner was overwritten. This will be overwritten in the FRP partition aswell with the new account and the old one no longer queried.
You, mister, are my savior! Thank you very much.
Solve works for Lenovo Yoga 3 tablet
Just a big giant thank you! My dad passed away leaving me a Lenovo Yoga 3 tablet, unable to gain access due to information stored in the FRP partition. :highfive:
Hi
I followed your instructions for first 5 points
redplate said:
1. Connect device to a Wi-Fi and Internet access.
2. Before confirming "Next", select another hotspot here
3. Go to "Advanced Settings" and change the proxy settings of any hotspot to Manual.
4. In the text input field of the proxy settings you enter now any word: e.g. Test
5. Now mark this word and select "Assist" in the context menu.
6. Selecting this "Assist" option opens the Google search application.
Click to expand...
Click to collapse
I marked the word and only that is offered on the top right side is : SELLECT ALL - CUT - COPY.
There is no ASSIST option . I don't know, maybe this tablet on my desk has a newer android version with that option removed...
Is there any other solution? Probably will be helpfull for me as well for someone who will have tjis problem in the future
Thx in advance
marOOn1971 said:
Hi
I followed your instructions for first 5 points
I marked the word and only that is offered on the top right side is : SELLECT ALL - CUT - COPY.
There is no ASSIST option . I don't know, maybe this tablet on my desk has a newer android version with that option removed...
Is there any other solution? Probably will be helpfull for me as well for someone who will have tjis problem in the future
Thx in advance
Click to expand...
Click to collapse
Hi. Actually I'm not into this anymore. Could be possible they removed it since it might was reported.
If I have any idea I'll let you know it
I have on my hands a P9 Lite of my friends..... He want to give away to his son and from the recovery (PowerUp + Down) he does a factory reset for completely restore your phone.
He suppose it's only need this but no.......... after the fist setup and after i add my wireless the phone, now, ask to put the previous google account but my friends he don't remember the exact google account used in this phone and the phone in fact it is completely unusable
At this point he asked for my help but i have tryed to found some guide over internet but apparently i can't found nothigs help our to unlock the situation. In the last two hours i have also tryed so many video over youtube to bypass this account request but nothings apparent's can help me.
I have reach the "Settings" (by Google Maps and use assistant to "open google" and after that open settings app) but from right here i can't do nothigs because there's no restore option of somethigs similar.....
If someone can help me and suggest somethigs thanks in advantage.
*EDIT 1st after another tentative*
In some mode........... i have followed one guide found on hardreset.info. I have reach the stock File Manager and from a SD Card i have installed the suggested "Go Launcher". By this i have enabled the Developer mode.... enable the oem unlock...... and from advanced setting i have launch the factore reset!
The phone it's boot as a LOWLEVEL format and after about 5 minutes now it's reboot............................. i hope it's not bricked...... it's stuck at TIM logo from about another 5 minutes.....
*EDIT definitive whit solution!!!*
BECAUSE do it yourself, do it for three...
Before all of that......... i have downloaded from hardreset.info "Go Launcher 2.40". I have copyed on a my MicroSD and i have inserted on the phone before to start all !!
1) Following partially the guide on hardreset.info.....
2) partially because the suggested mode to reach the download it's not works for me.... i have found another ways....
3) Using the stock "Huawei Swipe" keyboard after a lot of random combination i don't have understand how i do but i have obtain "Google Maps" app opened!
4) From "Google Maps" i have planned a little travel from..... selected and it's need to be appears the "START" to begin the navigation!
5) At this point..... tap on right "MIC" and says "open google" to phone! The phone responds to me and immediatelly after i obtain the "Google Assistant" opened!
6) From "Google Assistant" i can opened the stock "File" manager simply input "File" on search bar....
7) From stock "File Manager" and from SD (previously prepared!! Read above upper here) i have installed the "Go Launcher 2.40"
8) After a correct installation...... i have choose to open directly from end of installation.
9) I have obtain a home of android.......
10) Go in settings and from about i have, now, can successfully enable the DEVELOPER MODE !
11) From Developer mode i have choose to enable the "OEM Unlock" (i don't have idea if need... it's suggest also on hardreset guide)
12) Back from here and now enter on "Advanced Settings".. Reach "Backup & Reset"..... the last voice it's "Factory data reset"
13) Tap one time......... ACTIVATE THE OPTION for "Erase internal storage" and tap again to confirm on "Reset Phone" button
After about 2 minutes........ you see your phone reboot........... start a "LOW LEVEL" restore and....
Happy your phone............
I'm new and hoping that someone can help me here.
I have two Android devices and i know that i should use google, i used it for over 10 hours and can't find a solution...
I can show you a video or a photo of the proof of purchase, the phone has no value for me, only the files are important to me. I forgot my 4 to 6 digit pin on my second device, because i only used it two times per month. USB debugging and mobile data are turned off. Is there a way to bypass the pin or save the data?
DrFone has not listed my device. Have already tried in the recovery menu, the device to "mount". So I can enable automatic USB debugging. Developer option is I think off and the current Android version is probably 6.0.1. However, did not work, it came an error message
"failed to open dev block/bootdevice by name misc no such file or directory".
I'm not sure about this solution, but do you think that this will working for my problem ?
""1. You need to be rooted and cwm installed.(dont worry if you are not rooted, you can still root and continue to the procedure...)
2.you need aroma file manager.....
Steps:
1.copy aromafm-1.91.zip in your sdcard
2.reboot into recovery.(turn off, then hold volume up+home+power key)
3.install zip from sdcard.
4.select aromafm-1.91.zip
5.then go to settings scroll down and select mount everything, then come back to main menu...
6.now go to data/system and find gesture.key and delete it
7.exit and reboot..
8.when you restart you will still c pattern lock screen jst swipe""
Maybe you have other options ?
I believe in humanuty
Greetings from Germany and you guys are great !
Hoping that someone can help me. :fingers-crossed:
[GUIDE/TUTORIAL/HOWTO] Huawei Honor 5X from Stock to Android 10
[GUIDE/TUTORIAL/HOWTO] Huawei Honor 5X (kiwi) from Stock to Android 10 / LineageOS 17.1 in 2023
Complete guide to install Android 10 on your Huawei Honor 5X.
This tutorial only applies to this model, to check the correct version:
in Android, go to Settings > About phone > Model number, make sure it is one of these models:
- KIW-L24
- KIW-L22
- KIW-L21 (Qualcomm Snapdragon)
Not 100% sure for following models:
- KIW-L23
- KIW-AL10
- KIW-AL20
- KIW-CL00
- KIW-UL00
- KIW-TL00
- KIW-TL00H
- KII-L05
- KII-L22
- KII-L21
I wrote tis tutorial with KIW-L21.
See all my tutorials at https://github.com/djibe/Android-tutorials
Netflix and Disney+ are working.
CHANGELOG
v1. Initial release
1) WHAT YOU NEED
- djibe Honor 5X pack: https://bit.ly/honor5xdjibepack or https://anonfiles.com/EfHbPev2z2/djibe_Honor_5X_pack_zip or
(Contains TWRP Recovery 3.4.0-0 + Magisk root + Huawei USB drivers x32/64 + fastboot + cited files for root)
+ ROM LineageOS Unofficial 17.1: https://forum.xda-developers.com/t/rom-10-0-lineageos-17-1-unofficial-for-honor-5x.4212671/
Download latest build here: https://mega.nz/file/tbUliQ7Q#7f7Byu1QuuYNkojPnu5MDevPyCx6oMxXxQsjgjciCsE
+ BitGApps ARM64 10: https://github.com/BiTGApps/BiTGApps-Release/releases
+/- extra apps: https://bitgapps.github.io/addon/ARM64.html
+ a microSD card formatted in FAT32: copy ROM, GApps (+ Magisk). Insert it in phone
+ Charge phone to 100%
2) INSTALL DRIVERS
Install Huawei USB drivers.
Then plug phone to PC and let the install go on.
3) BACKUP YOUR DATA
When your phone is connected to Windows, search for all .jpg, .mp3, .mp4 files on your phone and make copies on your PC.
Then, with your Google Account (Whatsapp and co) or an app like Backupyourmobile, backup all your SMS, MMS, contacts.
Make sure the backup is located on microSD card.
4) UNLOCK BOOTLOADER
Update your Honor 5X to the latest official Android 6 Marshmallow (MM).
In Android, go to Settings > Updater. Make sure you have latest version.
Go to Settings > About phone.
Tap 7 times on Build number to unlock Developer options.
Go to Settings > Developer options.
Switch ON "Enable OEM unlock" and "USB debugging".
You must pay to unlock bootloader as Huawei closed the official website.
List of services offering unlock codes for money:
- DC Unlocker ($4 + VAT): https://www.dc-unlocker.com/supported_models_1/huawei_phones
- MinistryOfSolutions ($4): https://ministryofsolutions.com/huawei-bootloader-unlock-paid-service-html
Follow steps to get a paid unlock code. Here are the steps for DC Unlocker.
Go to DC Unlocker website: https://www.dc-unlocker.com/supported_models_1/huawei_phones
Download latest Client for Windows and install it.
On phone, launch Dial pad and type: *#*#2846579#*#*
ProjectMenu opens.
Go to Background Settings > USB Port Settings > select Manufacture Mode and Close.
### If you restart phone before the end of the process, you have to do this again.
Connect Honor 5X to PC.
Go to Windows Device Manager.
In the Modems section, Android Adapter Modem is listed.
In the Ports section, Android Adapter PCUI (COMn) is listed.
### If not, you must check USB drivers installation again.
Launch DC Unlocker.
- Select manufacturer: Huawei phones
- Select model: Auto detect (or Huawei Qualcomm Android phone)
Click magnyfying glass button.
DC Unlocker returns:
Code:
Found Applications port COM3
Found Diagnostics port COM5
Found Phone : HUAWEIKIW-L21
Model : Huawei Qualcomm Android phone
IMEI : xxx
Serial NR. : xxx
Firmware : xxx
Hardware ver. : HL3KIWMAD
Now go to DC Unlocker shop: https://www.dc-unlocker.com/buy
You need 4 credits ($4) for operation 24: Huawei Qualcomm Read Bootloader Code (up to Android 8)
Set subscription as:
Item: New user account
User name: YOUR CHOICE
Credits: 4
I used Credit card.
Note down purchase informations, we will need these in DC Unlocker.
Back to DC Unlocker.
Go to Server panel.
Fill User name and Password with data from your receipt.
Click Check login.
Go to Unlocking section and click Read bootloader code button.
DC Unlocker returns:
Code:
Reading bootloader code...
Bootloader code : xxx
Note down Bootloader code carefuly.
On phone, launch Dial pad again and type: *#*#2846579#*#*
ProjectMenu opens.
Go to Background Settings > USB Port Settings > select Google Mode and Close.
Go to my djibe/flash folder.
In the address bar, type cmd and confirm with keyboard Enter key.
Enter command:
Code:
adb devices
Authorize USB debugging from phone.
Enter command again (use arrow up key to print last command):
Code:
adb devices
Command returns
Code:
List of devices attached
W6HDU16325009900 device
Then:
Code:
adb reboot bootloader
Phone switches to white screen in FASTBOOT&RESCUE MODE.
To check that fastboot USB drivers are OK, type:
Code:
fastboot devices
### If command doesn't print a line like: 516b3414 fastboot, you have to fix USB drivers.
Now enter THE command:
Code:
fastboot oem unlock FILL_WITH_YOUR_UNLOCK_CODE
Confirm with enter and wait a moment ... till success is confirmed :
"(bootloader) Unlock success , the device will reboot and factory reset
OKAY [ 0.046s]
Finished. Total time: 0.046s".
Keep Windows command opened and let phone reset Android.
4) FLASH RECOVERY
Configure Android rapidly.
Unplug phone and replug USB.
Go to Settings > About phone.
Tap 7 times on Build number to unlock Developer options.
Go to Settings > Developer options.
Switch ON "Enable OEM unlock" and "USB debugging".
Back to Windows command, type:
Code:
adb reboot bootloader
Twice to authorize USB debugging from phone again.
Now that you are back to bootloader, enter:
Code:
fastboot flash recovery twrp-3.4.0-0-kiwi.img
Confirm with Enter.
Terminal confirms : "Finished. Total time: 2.711s".
And now:
Code:
fastboot boot twrp-3.4.0-0-kiwi.img
### If phone goes in a bootloop, disconnect phone and force shutdown holding Power button.
Welcome to TWRP 3.4 recovery.
TWRP asks for Keep System Read Only ? Swipe to Allow Modifications.
### You don't see this warning screen? Then you'll get "TWRP unable to mount storage" while trying to wipe partitions.
### > in TWRP, go to Reboot > Recovery so Recovery will refresh and popup the partition writing privilege.
In TWRP home screen, go to Wipe > Format data.
This will remove encryption.
Type yes and confirm to format partition.
Go to Reboot > Recovery.
Back to TWRP, go straight to Backup menu.
Select Boot, Data, System, Custom, OEMinfo, EFS and Firmware partitions.
Tap on Select Storage and set Micro SD card.
Swipe to Backup and wait during backup.
### If MicroSD card is too small. Backup on data partition and after backup has ended, go to Mount and connect phone to PC to retrieve TWRP backup folder.
### Store this backup (aka nandroid backup) somewhere safe before going further.
5) WIPE PARTITIONS
Go to Wipe > Advanced Wipe and check Cache, Data, Internal Storage, System and Swipe to Wipe.
6) FLASH ROM, BITGAPPS +/- MAGISK
Back to TWRP Home menu. Then tap on Install > select Storage MicroSD > choose lineage*.zip,
(if you don't see the files, tap on Select Storage and make sure Micro SDCard is active).
then Add more Zips > BiTGApps*.zip,
Optional: Add Magisk*.zip
then Swipe to confirm Flash.
Wait for operation to end.
Then tap Wipe cache/dalvik, swipe to confirm,
then Reboot System.
Android 10 is installed !
Wait for the phone to boot during 10 minutes.
7) ROOT WITH MAGISK (OPTIONAL)
### Only if you flashed Magisk via TWRP recovery
Do not connect to Android account.
Magisk root starts with Android.
You can manage permissions and extra modules with Magisk Manager app.
Open Files app > Install Magisk.apk.
Then in Magisk goto Settings > Hide magisk app and give it a name, switch Zygisk option ON.
Go to Modules Tab > Install from Storage: MagiskHidePropsConfig and safetynet.
Go to Developer options to disable Android debugging (ADB).
Reboot phone.
You can use yasnac app to check Safetynet passes.
Then with Files App: install netflix and disney+ if needed.
10) OTHER APPS
- You can use GPS Status & Toolbox for faster GPS fix.
- Developer options
Settings > About phone.
Tap 7 times on build number.
Back to Settings > System > Advanced > Developer options
Select USB Configuration > set MTP
Set Windows animation scale, Transition animation scale and Animator duration scale to .5x
That's it.
Enjoy ;-)
djibe
Thanks: @BadDaemon, LineageOS team, TWRP team, BitGapps team, TopJohnWu (Magisk)
Thanks for this updated tutorial. I might be like a lot of others who only recently purchased this smartphone. I think they cost a little more now then the $34.95 I paid a month ago.
Huawei Honor 5X 4G LTE Android 5.5" Dual-SIM 16GB Unlocked Smartphone 886598039147 | eBay
Find many great new & used options and get the best deals for Huawei Honor 5X 4G LTE Android 5.5" Dual-SIM 16GB Unlocked Smartphone at the best online prices at eBay! Free shipping for many products!
www.ebay.com
I originally purchased to I could try the freemobile SIM, but unfortunately it requires VOLTE. I also tried T-Mobile data only SIMS with it, but they seem to be shut down as I am still using the stock image.
I opted to use Ministry of Solutions as it was only $4 and DC seems to require the user to go through a process and Ministry of Solutions pretty much does all the work. The process just required me to do the following:
Go to their website and pay $4 via paypal for the service,
Contact them to let them know you paid for the service and schedule a time to get it done. I just used email.
Install teamviewer and provide the access information for them to access your system remotely.
Be available to configure the phone so they can do their work.
Wait for them to get done with the process and provide the unlock code for you.
The unlock code will also be included on paypal upon completion of their work.
So far I have only unlocked the bootlader and installed TWRP and will finish the process when I have time. I am just happy to have noticed that this tutorial is up to date and has links to all the resources needed to do the upgrade.
Hi @comm-ents, thanks for sharing.
I would not let anyone come on my computer but it is nice to have this alternative.
This phone is still damn cool, even though Honor closed their unlock site.
djibe89 said:
Hi @comm-ents, thanks for sharing.
I would not let anyone come on my computer but it is nice to have this alternative.
This phone is still damn cool, even though Honor closed their unlock site.
Click to expand...
Click to collapse
I wasn't too concerned as I currently use Linux Mint for work and Windows mostly for playing games so there isn't much there to compromise. I will be using them again if needed as they only did what was needed to get the code. I am pretty sure that a copy of Windows installed in Virtualbox would also work for increased security.
Just be aware that most compromised information isn't done while you're watching but behind the scenes so you're always taking a risk when connected to a remote site.
I suppose not having to pay $4 to get the unlock code would be nice, but it is just $4 to get even more benefits out of a very inexpensive dual SIM phone. Maybe if I am lucky it will be even more useful once I replace the Stock ROM with something a bit more up to date.
I am not able to install the lineage rom as I just get an error.
updater process ended with error 7 with my KIW-L24. I also tried to remove the assert lines as some instructions suggest should be done and it looks like the install went ok, but It ends up in a boot loop.
After trying the process twice just in case I made a mistake, I found that but removing the assert lines from the file, the install seems to complete, but I am no longer able to use TWRP from the phone as the touch screen doesn't work any more and Lineage doesn't boot either.
The only reason I can think of that the install doesn't work is because there is something that is different about the phone I have like it is a newer revision. It seems that the partition sizes might be different and when I remove the assert lines the install just writes to a partition that is too small to hold the data and it ends up overwriting itself so it is basically corrupted in the process. Just a theory, but I haven't had any luck with anything but the stock firmware.
comm-ents said:
I am not able to install the lineage rom as I just get an error.
updater process ended with error 7 with my KIW-L24. I also tried to remove the assert lines as some instructions suggest should be done and it looks like the install went ok, but It ends up in a boot loop.
After trying the process twice just in case I made a mistake, I found that but removing the assert lines from the file, the install seems to complete, but I am no longer able to use TWRP from the phone as the touch screen doesn't work any more and Lineage doesn't boot either.
The only reason I can think of that the install doesn't work is because there is something that is different about the phone I have like it is a newer revision. It seems that the partition sizes might be different and when I remove the assert lines the install just writes to a partition that is too small to hold the data and it ends up overwriting itself so it is basically corrupted in the process. Just a theory, but I haven't had any luck with anything but the stock firmware.
Click to expand...
Click to collapse
Sure of your model ?
Info about kiwi | LineageOS Wiki
wiki.lineageos.org
djibe89 said:
Sure of your model ?
Info about kiwi | LineageOS Wiki
wiki.lineageos.org
Click to expand...
Click to collapse
Yep. Model number KIW-L24.
comm-ents said:
Yep. Model number KIW-L24.
Click to expand...
Click to collapse
Format Data
Wipe all partitions
Reboot recovery
Flash
Leads to Error 7 ?
djibe89 said:
Format Data
Wipe all partitions
Reboot recovery
Flash
Leads to Error 7
Click to expand...
Click to collapse
Yes.
The first issue is that when I try to format Data I get: Unable to wipe '/data' -- unknown file system 'auto' Unable to format to remove encryption. I found a suggestion to format the /data partition manually from adb shell which works.
The Lineage from wasn't the only Install I the error 7 with though as ResurrectionRemix-M-v5.7.4-20161220-kiwi also gave the same error 7.
Now the touch screen isn't working again in TWRP because I accidentally installed the wrong version of Lineage. with the assert lines removed. It would be nice to know how I can do a restore from the command line, but the TWRP command line guide isn't much help. It is just too much of a PITA that once I can get stock back on it I will just sell it while I'm ahead.
Sometimes you have to manually reformat.
Go to Wipe > Advanced wipe > Cache > Change partition
Too bad you didn't succeed
I was able to unlock the boot loader and still have a rooted phone. What I had hoped to do is use it with a T-Mobile data only plan and a SIM from FreeMobile provides a few hundred minutes a month for free.
I don't know why I get the Error 7, but you can't just remove the assert lines as the install might seem to have worked, but that is only because it just proceeds to install even though there might be something wrong and the install just messes up the phone.
I am still using the phone right now to test as a hotspot. The real reason that SIM didn't work in the phone is because of something on T-Mobiles end so it actually works in the phone now and since it is rooted I can make other changes that actually allow it to work as hotspot without limitations.
I should be able to find another dual SIM phone that can be rooted, but I am not sure there is anything that also supports Volte.
Is there otherway to unlock bootloader without paying 4 dollar. My country has restriction. i cant pay.
neysariy said:
Is there otherway to unlock bootloader without paying 4 dollar. My country has restriction. i cant pay.
Click to expand...
Click to collapse
No way.
Or tell us if a miracle happened
In djibe Honor 5X pack, you said it contains Huawei USB drivers x32/64 but i didnt found it. Only driver that worked is:
Support area | files.dc-unlocker.com
files.dc-unlocker.com
Please add to your pack if you forgot that
In my phone there is not "unlock oem" option. What shoud i do. It that important?
Dc unlocker say error conection to server. I dont know why.
I'll dig into it. Thx
This guy in telegram can unlock bootloader of huawei phones very fast @fullkade_huawei_support
.
neysariy said:
In djibe Honor 5X pack, you said it contains Huawei USB drivers x32/64 but i didnt found it. Only driver that worked is:
Support area | files.dc-unlocker.com
files.dc-unlocker.com
Please add to your pack if you forgot that
Click to expand...
Click to collapse
Pack updated with USB drivers. Sorry for that