Tips to enable S-Pen features on CM/AOSP ROMs - Sprint Galaxy Note 4 General

Guys, I'm sharing few tips to enable S-Pen features on CM/AOSP based ROMs for Note series devices (works like a charm on Note 4 & Note 3).
The S-Pen feature is sorely missed by the users of Note Series and there are certain apps available on PlayStore which restore the maximum possible functionality on above mentioned ROMs. However, since these apps are not known by many, I've decided to make a thread which can benefit users who want CM/AOSP based ROMs without loosing the S-Pen functionality.
Hence, here are the steps:
1. I've tested this on recently released CM 14.1 ROM by @hsbadr for Galaxy Note 4 and it works flawlessly. Do checkout his ROM & appreciate his work by thanks and/or a donation.
2. Install following apps from the PlayStore:
a) CM S-Pen
https://play.google.com/store/apps/details?id=com.tushar.cmspen2&hl=en
b) Note Buddy
https://play.google.com/store/apps/details?id=com.tushar.spen_helper&hl=en
c) Screenshot Crop & Share
https://play.google.com/store/apps/details?id=com.flextrick.universalcropper
d) Sketchbook
https://play.google.com/store/apps/details?id=com.adsk.sketchbook&hl=en
e) Scrrenshot Ultimate (Optional as Screenshot Crop & Share is good too)
https://play.google.com/store/apps/details?id=com.icecoldapps.screenshotultimate
3. It is recommended to install SuperSU as well because some apps may not work well with in-built root of the ROM. (I used Emotion AOSP in the past with in-built root and the apps did not work properly but with CM 14.1, apps work fine with in-built root. So, test your options. For some it may work & for some, it may not...)
4. Also, due to SELinux policies, a problem might occur that may hamper apps functionality. So, for that an app called SELinux Policy Changer (not available on PlayStore because of Google's policy, but available on XDA) can be used.
5. Open CM S-Pen AddOn app & tap on "Detection Disabled" to change into "Detection Enabled".
6. Open Note Buddy App & tap on "S Pen" tab. Enable this feature & then tap on "Auto Launch" menu.
Enable it. Tap the button below that says blank+ and choose Application Shade. Give it a name as per your liking. Close out the window & then Pull out the S Pen. Tap on the + symbol in the top right hand corner & tap on applications and add Sketchbook. Tap on shortcuts and add Take Screen shots for screen-write. Also, tap on shortcuts and add Take Screen shots for screen-write.
7. For S-Pen sounds, take a look at the below thread:
http://forum.xda-developers.com/showthread.php?t=2474218
(Since I don't use sounds for S-Pen, I've no experience on how it sounds or work)
8. Open the Screenshot Crop & Share app & enable all the permissions that it needs. For simplicity, you can use "Floating Bubble" feature that places a bubble (similar to FB's Messenger Chat Head) which will let you to take a screen-shot with all the available features with just a click.
9. If you want a pointer for your S Pen then it can be enabled through phone's settings under Language & input. Scroll down to the end of the page & enable "Show icon when using Stylus" for a pointer.
10. Screenshot Ultimate is full of features but it might give some errors to some users or some users might find it bit finicky to use. So, I would suggest to use Screenshot Crop & Share.
For setting up Screenshot Ultimate, open the app. Let SuperSU give it root access. Next, the app will take a minute to set itself up. After it is done, click on Triggers and scroll down to custom shortcut and open custom shortcut settings. Select as follows:
When clicked----------> Take Screen-shot
After screen-shot---------> Edit
Notifications--------->Vibration, sound & toast
Timeout----------> 1 second
Go back to the app's home screen & scroll to settings and open open "General Settings." Change format and quality to your liking. Scroll to timeout and click Disable all timeouts. Close the app.
11. For performing the screen-shot writing:
Pull out the S Pen & once the window opens, click on Take a Screen-shot. After the Screen-shot, a screen titled EDIT options should pop up. Click on Draw. Draw something. Click on settings and save it. Click on view and open it in your gallery. From there you can share it on any app as per your choice.
That's all.
Start using S-Pen features on CM/AOSP based ROMs with ease.
In case of any issues, write in comments section & I'll try to help you out in minimising them.
If everything works, don't hesitate to hit the "Thanks" button.

robinhood1808 said:
Guys, I'm sharing few tips to enable S-Pen features on CM/AOSP based ROMs for Note series devices (works like a charm on Note 4 & Note 3).
The S-Pen feature is sorely missed by the users of Note Series and there are certain apps available on PlayStore which restore the maximum possible functionality on above mentioned ROMs. However, since these apps are not known by many, I've decided to make a thread which can benefit users who want CM/AOSP based ROMs without loosing the S-Pen functionality.
Hence, here are the steps:
1. I've tested this on recently released CM 14.1 ROM by @hsbadr for Galaxy Note 4 and it works flawlessly. Do checkout his ROM & appreciate his work by thanks and/or a donation.
2. Install following apps from the PlayStore:
a) CM S-Pen
https://play.google.com/store/apps/details?id=com.tushar.cmspen2&hl=en
b) Note Buddy
https://play.google.com/store/apps/details?id=com.tushar.spen_helper&hl=en
c) Screenshot Crop & Share
https://play.google.com/store/apps/details?id=com.flextrick.universalcropper
d) Sketchbook
https://play.google.com/store/apps/details?id=com.adsk.sketchbook&hl=en
e) Scrrenshot Ultimate (Optional as Screenshot Crop & Share is good too)
https://play.google.com/store/apps/details?id=com.icecoldapps.screenshotultimate
3. It is recommended to install SuperSU as well because some apps may not work well with in-built root of the ROM. (I used Emotion AOSP in the past with in-built root and the apps did not work properly but with CM 14.1, apps work fine with in-built root. So, test your options. For some it may work & for some, it may not...)
4. Also, due to SELinux policies, a problem might occur that may hamper apps functionality. So, for that an app called SELinux Policy Changer (not available on PlayStore because of Google's policy, but available on XDA) can be used.
5. Open CM S-Pen AddOn app & tap on "Detection Disabled" to change into "Detection Enabled".
6. Open Note Buddy App & tap on "S Pen" tab. Enable this feature & then tap on "Auto Launch" menu.
Enable it. Tap the button below that says blank+ and choose Application Shade. Give it a name as per your liking. Close out the window & then Pull out the S Pen. Tap on the + symbol in the top right hand corner & tap on applications and add Sketchbook. Tap on shortcuts and add Take Screen shots for screen-write. Also, tap on shortcuts and add Take Screen shots for screen-write.
7. For S-Pen sounds, take a look at the below thread:
http://forum.xda-developers.com/showthread.php?t=2474218
(Since I don't use sounds for S-Pen, I've no experience on how it sounds or work)
8. Open the Screenshot Crop & Share app & enable all the permissions that it needs. For simplicity, you can use "Floating Bubble" feature that places a bubble (similar to FB's Messenger Chat Head) which will let you to take a screen-shot with all the available features with just a click.
9. If you want a pointer for your S Pen then it can be enabled through phone's settings under Language & input. Scroll down to the end of the page & enable "Show icon when using Stylus" for a pointer.
10. Screenshot Ultimate is full of features but it might give some errors to some users or some users might find it bit finicky to use. So, I would suggest to use Screenshot Crop & Share.
For setting up Screenshot Ultimate, open the app. Let SuperSU give it root access. Next, the app will take a minute to set itself up. After it is done, click on Triggers and scroll down to custom shortcut and open custom shortcut settings. Select as follows:
When clicked----------> Take Screen-shot
After screen-shot---------> Edit
Notifications--------->Vibration, sound & toast
Timeout----------> 1 second
Go back to the app's home screen & scroll to settings and open open "General Settings." Change format and quality to your liking. Scroll to timeout and click Disable all timeouts. Close the app.
11. For performing the screen-shot writing:
Pull out the S Pen & once the window opens, click on Take a Screen-shot. After the Screen-shot, a screen titled EDIT options should pop up. Click on Draw. Draw something. Click on settings and save it. Click on view and open it in your gallery. From there you can share it on any app as per your choice.
That's all.
Start using S-Pen features on CM/AOSP based ROMs with ease.
In case of any issues, write in comments section & I'll try to help you out in minimising them.
If everything works, don't hesitate to hit the "Thanks" button.
Click to expand...
Click to collapse
Thank you very much for this explanation.
I haven't known that there is s-pen for cm/aosp roms until you tell me that.
Great to find a guide how to get it work.
If you could add screenshots to your thread to see s-pen and it's functions it will be great.

anees02 said:
Thank you very much for this explanation.
I haven't known that there is s-pen for cm/aosp roms until you tell me that.
Great to find a guide how to get it work.
If you could add screenshots to your thread to see s-pen and it's functions it will be great.
Click to expand...
Click to collapse
I remember that you asked for a help about S Pen feature on CM ROM.
Now, you have one....
Will add pictures soon.

What I really want is palm rejection. It's the only thing that is lacking in AOSP roms

Nice info and write up! Thanks!

Hi, thanks for sharing. I have a question, do you know how to get the heart rate monitor to work with CM/AOSP ROMS? I tried installing S Health on CM14.1 but S Health doesn't seem to detect the HR monitor. Thanks in advance.

Hey
Hey. I have a note 4 and resurrection remix nougat. First i used the spen to draw or write but suddenly it stopped working. Hovering works perfect but i cant tap or write. Button works perfectly. I tried se linux inable and cm ad on and others such as flashing rom again but none worked

https://mega.nz/#!Al83zAKR!6IybgNDA9SZXjtou5tFmR1UKU0IdBr-wiYZXRfEXX30

Any chance of functionality on a n910t running LineageOS based ROM? Ive tried switching to permissible and tried using the CM pen app and it just crashes.

New to ROMs here and could use a little help.
Running a LOS 14.1 on my SM-P900.
Followed the steps but my sPen still not working. No detection when I pull out the sPen.
Thanks.

note 4 with android 10 lineage 17.1. Is it work?

Related

Become a G2 / Android Ninja with these Tips/Tricks

I thought I'd share everything I've learned regarding Android & the T-Mobile G2 over the past 2+ weeks (thanks XDA!). I'm amazed at how many people don't read these forums - they simply blurt out their questions. Well follks, here's what I've picked up by reading reading reading & exploring exploring exploring. Hope this helps n00bs and leets alike.
Android
Press & Hold HOME to see multitasking applications sorted by most recent
Press & Hold SEARCH to activate Google Voice Actions (or VLingo if installed)
Long Press keyboard keys to see alternate characters
Tap Dots near the Dock Bar (bottom set of icons) to shift screens
Assign your Power Button to 'End Calls' via Menu >Settings >Accessibility > Check "Power button ends call"
Add 'Power Control' Widget to easily enable/disable your WiFi/BlueTooth/GPS/Screen/Auto-Sync
Using Volume Control buttons, you can put the phone into Silent or Vibrate modes
You can add Shortcuts to your most used contacts & it will give an icon that lets you access Call/SMS/Email/GTalk/Facebook
Keyboard Tips
Double Press ALT for Num/Symbol Lock
Double Press SHIFT for Capitalization Lock
Hold ALT & Long Press physical keys to see alternative characters
Map Application Shortcuts such as Search + G to launch Gmail. Located under Settings >Applications >Quick Launch
Menu +A(Select All), +C(Copy), +V(Paste), +X(Paste)
Menu +F(Find), +S(Share)
(G2 Only?) Reboot, Press and hold Power + Volume Down + trackpad
(G2 Only?) Use LauncherPro to Assign 'Activities' to the Quick Keys such as Compose SMS or Tweet
(G2 Only?) Press & Hold the Camera Button to activate the Camera
(G2 Only?) While in Camera Mode, gently press the camera button to auto-focus
Miscellaneous
Install a custom launcher like ADW or LauncherPro
- Tip 1: If you get LauncherPro, I encourage you to explore the 'Swipe' feature by Long Pressing any icon in the Dock. Allows for two actions!
- Tip 2: My personal favorite is when you hide the status bar and set the HOME button to display notifications when you press it (Only possible if you make LauncherPro default launcher)
- Tip 3: Long Press an Application & when the Trash Can Appears, Hold over the Trashcan to get an Uninstall Option
Use Tasker to automate things on your phone
TeslaHD will turn your phone's LED into a Flash Light or Strobe Light
AppBrain + Fast Install is excellent for exploring apps from the comfort of a browser (also lets you set backgrounds)
- This App also makes it easy to restore apps if you didn't remember to set your 'backup' as automatic when configuring your phone
VLingo is a great alternative to Voice Actions if you're not on 2.2 OR you want deeper integration with Twitter/Facebook/Foursquare
Google Gestures is a great app to assign to a secondary swipe (see LauncherPro) & is handy when voice doesn't work and you can't easily type
DolphinHD is a great alternative browser that has three great features: Tweet a Page (with Title & Link), Desktop Mode, and Google Mobilizer View
Dial 611 to get to T-Mobile Customer Support (not always clear to new subscribers)
Best Keyboard for two-finger text input is SwiftKey. Swype is good if you practice with one finger.
Other Great Apps to Consider
Evernote (for note storage)
Dropbox (for access to files from your desktop)
Fast Reboot (for a heavy handed, kill all apps when you notice slow performance)
Dato GTasks (simple, easy to use app that integrates with Google Tasks)
NewsRob (elegant RSS reader for Google Reader)
Smooth Calendar (nice calendar widget that shows more than the default Calendar widget)
Xtremelabs Speedtest (helps you test for HSPA+ speeds)
Twicca (better than the standard Twitter App & very beautiful. Easy to map Tweet-Activity to a G2 Quick Key)
Chrome to Phone (possibly my favorite app once I learned how to use it. Great for a variety of needs so I encourage experimentation)
Optimize Your G2
Go to SETTINGS > APPLICATIONS > DEVELOPMENT and enable USB DEBUGGING
Search the Market for "Visionary" and Install (advice: Reboot & then run it for the first time) By default, it will run automatically on boot each time.
- Note: If you want to remove ROOT, visit APPLICATIONS > MANAGE APPLICATIONS > VISIONARY and press "Clear Data". Then re-run & turn off Root-on-Boot or just Uninstall.
Search the Market for "ConnectBot" & Install. Run Connectbot & press the down-arrow next to "ssh" to choose "local" & press Enter (no Nickname needed)
- You will be presented with a command line prompt of "$" & yes, it will be VERY TINY on your screen. Simply type "su" (no quotes) to gain super user.
- Read the first post to determine which items you want to permanently disable (essentially remove) from your phone: http://forum.xda-developers.com/showthread.php?t=809231
Visit the market to download "Startup Cleaner 2.0" by Bright Wallace. It will allow you to prevent items from starting up. The software is buggy, but works better than anything else I've encountered.
- Tip: Use the 'Batch Prevent' to prevent all apps from starting, then exit the app. Run the app again & then toggle the apps you want to start by tapping them. Otherwise, the app is very unresponsive when trying to manage apps on an individual basis. You may need to re-run Visionary after you've allowed it to run on boot via Startup Cleaner.
Setup Wifi Tethering
Once you have Root & SuperUser, use your browser to visit http://code.google.com/p/android-wifi-tether/downloads/list & download the most recent version of "Wireless Tether".
- Once downloaded, run it to install. If you have trouble with this, I recommend using Chrome-to-Phone & simply right-click the file link to choose "Chrome-to-Phone"
After successful installation, run the Wireless Tether app. Recommend changing the SSID Name (name that appears).
- Note: Multiple people report issues with WiFi Encryption, so I recommend SETTINGS > ENABLE ACCESS-CONTROL. Your phone will log when something tries to connect to it & then you can "allow" by choosing MENU > ACCESS CONTROL and clicking the checkbox next to the device you want to allow.
{Update} If you're feeling adventurous, check out this article on how to use Tasker
http://androinica.com/2010/08/19/9-ways-to-make-android-automatic-with-tasker/
{Update 2} Long-press App & dragging over trashcan for uninstall is a LauncherPro feature, not android. Thanks to tekkaman_01 for the note!
{Update 3} Removed "When screen is locked but keyboard is open, you only have to press a key to unlock" because it isn't a consistent experience. Not sure what makes it work sometimes.
{Update 4} Added two sections: Optimize Your G2 & Setup WiFi Tethering. Small formatting changes to previous entries.
Long Press an Application & when the Trash Can Appears, Hold over the Trashcan to get an Uninstall Option is a feature of LauncherPro not stock android...
Updated - much thanks!
No problem
Sent from my T-Mobile G2 using XDA App
Great job, OP.
Great job, OP. I'm sure many people will appreciate this.
Does this merit a sticky?
Sent from my T-Mobile G2 using XDA App
Ghostcreamy said:
I'm amazed at how many people don't read these forums - they simply blurt out their questions.
Click to expand...
Click to collapse
You're right....people who don't read the forums and just blurt stuff out are horrible. Oh wait....what's this?
http://forum.xda-developers.com/showthread.php?t=804439
Ghostcreamy said:
[*]When screen is locked but keyboard is open, you only have to press a key to unlock
Click to expand...
Click to collapse
I've heard this before but this hasn't worked for me on two different G2s.
great, thanks
aedv said:
You're right....people who don't read the forums and just blurt stuff out are horrible. Oh wait....what's this?
http://forum.xda-developers.com/showthread.php?t=804439
Click to expand...
Click to collapse
thank you
<10 chars>
The cheat sheet of all cheet sheets!
Another good one is to:
HOLD Dots near the Dock Bar to see all screens in a mini navigation look.
Thanks!
Snap!
aedv said:
You're right....people who don't read the forums and just blurt stuff out are horrible. Oh wait....what's this?
http://forum.xda-developers.com/showthread.php?t=804439
Click to expand...
Click to collapse
SNAP!
I read that thread, but it was fragmented and I already had all of this in Evernote. Regardless, I appreciate the response & I'll continue to monitor that thread for any other tips that I can compile into this one.
Side note: You don't have to be mean to make a point Put a little love in your heart!
GC
Ghostcreamy said:
SNAP!
Side note: You don't have to be mean to make a point Put a little love in your heart!
GC
Click to expand...
Click to collapse
+1!! Great post OP!
Sent from my T-Mobile G2 using XDA App
Updated original post (OP) with a section on optimizing your G2 & setting up Wifi Tethering. Hope it helps!
awesome tips. i was wondering if theres a good way to allow the home screen and apps screen to auto rotate with gravity(only rotates with keyboard out)? and then on the flip side, to lock the orientation?
Not sure about locking, but LauncherPro or ADW launcher will rotate to landscape.
Sent from my T-Mobile G2 using XDA App
Here's a tip if you are using Launcher Pro: setup a 2x2 picture frame widget in the middle of a home panel. The frame should have a picture of an icon for things like settings, games, news, people, etc. Then add related app icons around the frame. This way, when you pinch a homescreen and pull up the 7 panel view, you can easily tell at a glance which panel has the apps you want
Sent from my T-Mobile G2 using The Force
"+X(Paste)"
Shouldn't that be "+X(Cut)"?
In the gmail and xda apps (the only ones I've tested so far) when you push the space bar after a word/letter, it will add a '.[space]'.
Sent from my T-Mobile G2 using XDA App
Great post Ghostcreamy. I figured out that you could swipe the home icon of launcher pro, but why it never occured to me that the other icons also have this feature?
Edit:There's your first "Thanks" on the meter...awww.

Enable Multiwindow in MIUI [Nougat] No Root

We all know Xiaomi doesn't let us use multiwindow on its MIUI though its an android nougat feature. However there's a nifty trick to activate this feature on any nougat MIUI device including our Mi 5.
Note that this works on nougat based MIUI only.
First download the app called Button Mapper. You need the pro version.
Playstore link https://play.google.com/store/apps/details?id=flar2.homebutton
Open the app and give permission for services.
Go back to the app and click the 'Menu' button. On top activate customisation. Click on long press. Scroll down and select Split screen.
Your device is now ready to use splitscreen or multiwindow feature. Open an app. Press and hold the menu or recents button. Slide your finger from the extreme bottom of the screen to slide the window up. Now you can open and run another app simultaneously. When using two apps at a time, press the outline separating the windows for a few options.
Make sure to allow the app to autostart in Security>Permissions>Autostart.
Not all apps are supported by default but you can do it by enabling force activities to be resizable from developer settings. And this won't always work like you intend. You may face a few bugs.
SilverMarcs said:
We all know Xiaomi doesn't let us use multiwindow on its MIUI though its an android nougat feature. However there's a nifty trick to activate this feature on any nougat MIUI device including our Mi 5.
Note that this works on nougat based MIUI only.
First download the app called Button Mapper. You need the pro version.
Playstore link https://play.google.com/store/apps/details?id=flar2.homebutton
Open the app and give permission for services.
Go back to the app and click the 'Menu' button. On top activate customisation. Click on long press. Scroll down and select Split screen.
Your device is now ready to use splitscreen or multiwindow feature. Open an app. Press and hold the menu or recents button. Slide your finger from the extreme bottom of the screen to slide the window up. Now you can open and run another app simultaneously. When using two apps at a time, press the outline separating the windows for a few options.
Make sure to allow the app to autostart in Security>Permissions>Autostart.
Not all apps are supported by default but you can do it by enabling force activities to be resizable from developer settings. And this won't always work like you intend. You may face a few bugs.
Click to expand...
Click to collapse
I never expected it to work but it do , will do some more tests
I need quick reply then no need to wait for MIUI 9
midterm_2003 said:
I never expected it to work but it do , will do some more tests
I need quick reply then no need to wait for MIUI 9
Click to expand...
Click to collapse
Just got news that miui is bringing multiwindow in miui 8. The alpha builds will get it first. Quick reoly is probably a long way to go, sadly.
Thank you
The quick reply is really much important and useful then the multitasking window , I hope someone here can find a workaround or an app that can do this without rooting , I have tried some floating apps like notifly but all doesn't provide any thing near the native quick reply feature
works only for menu button? tryed other and no effect
KaMeR1337 said:
works only for menu button? tryed other and no effect
Click to expand...
Click to collapse
Works for me on menu button. Havent tried others. Im on Los currently. Make sure youre running nougat though
SilverMarcs said:
Just got news that miui is bringing multiwindow in miui 8. The alpha builds will get it first. Quick reoly is probably a long way to go, sadly.
Click to expand...
Click to collapse
This app causes the 3 fingers slide screenshot to stop working ? Any idea how to avoid this ?
midterm_2003 said:
This app causes the 3 fingers slide screenshot to stop working ? Any idea how to avoid this ?
Click to expand...
Click to collapse
Havent looked into it. This is probably because the app alters input of the device. Does three finger screenshot stop working when using two windows at a time or just after configuring anything within the app?
SilverMarcs said:
Havent looked into it. This is probably because the app alters input of the device. Does three finger screenshot stop working when using two windows at a time or just after configuring anything within the app?
Click to expand...
Click to collapse
Just after configuring anything within the app ? I think once you grant accessibility access it tottaly stop working in all cases

[GUIDE] Enable DT2S without entering in conflict with fingerprint unlock [NO ROOT]

How to enable DT2S without entering in conflict with fingerprint unlock​
Hi guys, i recently found a way to enable the DT2S (Double Tap To Sleep) feature on our Honor 8 without giving any administrator permission. As you probably know, when using any application for DT2W it requires the "Device Administrator" permission to immediately lock the screen, but apart the fact that this option could be potentially dangerous, giving administrator permission enables a security measure wich consists in PIN immission right after the screen has been locked (and you try to unlock it with fingerprint). But this method seems to work flawlessy, avoiding the nuisance to insert a PIN everytime the device gets unlocked. The process is quite easy and can be achieved without root, but there are some requirements that i'm going to list below:
You must use Nova Launcher Prime as home screen replacement
You must to be on Android Marshmallow 6.0 or Higher
​
1. Open the Nova Settings and select the "Gestures" option
1. Take a look at the arrow in the first attachment
2. Select the "Double Tap" option when shows up
2. Take a look at the arrow in the second attachment
3. Select the "Shortcut" tab on the right
3. Take a look at the arrow in the third attachment
4. Select the "Lock screen" option
4. Take a look at the arrow in the fourth attachment​
By following the steps above you'll be able to take advantage of the DT2S lock method without compromise the fingerprint unlock function. BTW i don't know if this is a functionality or a bug (i don't think it's a bug), the only thing i know is that it's working good with no problems, also after reboot and shutdown.​
PAY ATTENTION
I'm actually using the BETA 5.5 version of Nova, not tested with regular version​
Hope this post could help someone Enjoy!​
I use Nova Launcher to DT2S without Enable device admin or timeout. Just goto Guesture of Nova Settings, choice shortcut then select Screen Lock. All done
PS:
Ahhh, Your guide like me
blackbuffalo said:
I use Nova Launcher to DT2S without Enable device admin or timeout. Just goto Guesture of Nova Settings, choice shortcut then select Screen Lock. All done
PS:
Ahhh, Your guide like me
Click to expand...
Click to collapse
I didn't understand if the P.S line was sarcasm or not. However if you knew that, good, but not everyone knows that. If you just go in Gestures/Double tap/Nova/Lock screen it doesn't work because ask for admin permission, but if you go in Gestures/Double tap/Shortcuts/Lock screen that works. I just wrote this to help someone who didn't already figured this out

(Guide): How to enable custom launchers on Chinese ROM EMUI

Note: Please don't tell us how easy it is to change launchers in default apps, that has not been possible since EMUI 9 for chinese roms, see > https://forum.xda-developers.com/hu...i-9-removes-default-launcher-options-t3853441
WARNING:RECENT APPS MENU WILL STOP WORKING
All credits to Web1n on Github for figuring out this method.
Here is official guide in chinese
App download on Google Play
https://play.google.com/store/apps/details?id=web1n.stopapp&hl=zh
Steps:
(Note that this method needs to be repeated every restart)
- Install the custom launcher of your choice and ensure it is the only launcher installed other than Huawei home
- Install and setup adb on your computer
- Enable developer options on your phone
- Turn on adb debugging and adb in charge only mode
- Make sure your device is on usb charge only mode
- Install the app from link above
(note i am using a Samsung for screenshots as I don't want to mess up my main Huawei, but I got it working there through the same steps)
https://imgur.com/a/hYPkSiY
After installing app tap the right arrow until this page, tick the box to agree to TOS
https://imgur.com/a/2e3B2Vp
Tick second box
https://imgur.com/a/dKxEZwm
Tap right and you will be greeted with this home screen, tap the plus arrow
https://imgur.com/a/j1SzlFX
Tap second tab to look for system apps, find the app huawei home
https://imgur.com/a/3GgZfSA
Return to this screen, you will see the Huawei home icon, ensure it is greyed out, tap it if it is not so.
Done! Gesture navigation will no longer work but an app like fluid gestures work well enough, enable 3 button navigation in options and tap home to enjoy your new launcher. Your multotasking button has also just become useless...
Again, all credits goes to the developer
jalk44 said:
Note: Please don't tell us how easy it is to change launchers in default apps, that has not been possible since EMUI 9 for chinese roms, see > https://forum.xda-developers.com/hu...i-9-removes-default-launcher-options-t3853441
All credits to Web1n on Github for figuring out this method.
Here is official guide in chinese
App download on Google Play
https://play.google.com/store/apps/details?id=web1n.stopapp&hl=zh
Steps:
(Note that this method needs to be repeated every restart)
- Install the custom launcher of your choice and ensure it is the only launcher installed other than Huawei home
- Install and setup adb on your computer
- Enable developer options on your phone
- Turn on adb debugging and adb in charge only mode
- Make sure your device is on usb charge only mode
- Install the app from link above
(note i am using a Samsung for screenshots as I don't want to mess up my main Huawei, but I got it working there through the same steps)
https://imgur.com/a/hYPkSiY
After installing app tap the right arrow until this page, tick the box to agree to TOS
https://imgur.com/a/2e3B2Vp
Tick second box
https://imgur.com/a/dKxEZwm
Tap right and you will be greeted with this home screen, tap the plus arrow
https://imgur.com/a/j1SzlFX
Tap second tab to look for system apps, find the app huawei home
https://imgur.com/a/3GgZfSA
Return to this screen, you will see the Huawei home icon, ensure it is greyed out, tap it if it is not so.
Done! Gesture navigation will no longer work but an app like fluid gestures work well enough, enable 3 button navigation in options and tap home to enjoy your new launcher.
Again, all credits goes to the developer
Click to expand...
Click to collapse
Thank you :good:
Thank you. It works but recent app not work even if with 3 button navigation.
nhan1411 said:
Thank you. It works but recent app not work even if with 3 button navigation.
Click to expand...
Click to collapse
unfortunately yes, huawei even went to the step of removing old vertical overview menu so that the only overview menu in these buklds comes from the launcher
Recent apps stopped working for me when I updated to EMUI 10 then downgraded because of this and now it works on EMUI 9. Thanks for this, was going mad for 3 days because I couldn't disable the stock launcher even though my phone is rooted.
For those now missing Recents : Swiftly is a circular gesture activated app launcher with its own Recents :laugh:
I now have "Tap for Recents"
You can place Swiftly with a surface area (over where the middle icon would be on the dock) for activation on the bottom center. You can then tap or tap-hold for recents.
Make sure the middle position there on the dock is empty, so it doesn't have an app icon or folder. Make the rectangle big enough to activate Swiftly, but small enough not to overlap with selecting the input field of WhatsApp, Messenger, ...
In my Nova 5T I also lost swipe up for home (anyone else?) When I uninstalled the default launcher. So I use Fluid Natural Gestures for all of the bottom to swipe up for home.
The two overlay areas of these apps overlap but for me don't interfere with each other. You can also enable "immediate activation" in both for nice swift operation.
(I could choose between Nova and Default Launcher in Emui 10, I'm in Europe. But removed default because regularly it would switch back to Default Launcher)
Update: has stopped working
Feel free to still try as it seems to be different builds for everybody
.
Guys...i've done....but not with this method....
TheFastGT said:
Guys...i've done....but not with this method....
Click to expand...
Click to collapse
How have you done it then?

SP9820E SoC powered kid watches and rebrands: Kinyo, Garett, Lemfo, etc.

State of market
Do NOT buy this watch. It looks like excellent value for money, but much modern H1 / W5 series with Android 9 and full Play Store just hit the shelves on AliExpress for almost the same price.
If mine arrives I'll create separate thread about them.
Brands
My specific watch that I used to experiment with is G4P, bought straight from Chinese factory:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
However almost everything from this thread applies to any watch running on SP9820E SoC, like G4E or G4H series.
Those watches are also often rebranded and sold as: Kinyo, Garett, Lemfo, Wonlex, Locon and many more.
Just check in spec if it is running on 9820E chip and you are good to go.
Reasons for modding
Those watches by default use very limited set of very simple applications presented in most ugly launcher and icon sets achievable by humans.
You can not install any extra applications and what you get from the box is very disappointing.
Also they are meant to be managed exclusively by corresponding phone application like SeTracker 2 (or rebrands like Garett Tracker),
which means you need to send your data to Chinese service and use WeeChat for chats/video calls, whether you like it or not.
This is true shame, because SP9820E is quite powerful hardware, here is GeekBench score.
Do not be fooled by oversimplified stock software - you can run pretty much any "real" application on it.
Luckily because those watches use Android under the hood you can transform them to something more feature-rich and more pleasant to use.
Android KitKat is NOT Android Wear
Those watches use Android 4.4, codename KitKat. Just like old phones. Please do not confuse it with Android Wear operating system and do not try to use applications built for Android Wear. Whatever you use must be Android 4.4 compatible, anything newer won't install at all. Android on this watch is heavily modified, lacks some components and you will run into many crashes or weird behaviour. Sections below will help you to navigate through those issues.
Also applications back in KitKat era were not designed with watch screens in mind, so expect bad interface scaling, not accessible buttons and huge or microscopic fonts.
How to install any application from stock Launcher?
Get application *.apk file from trusted site.
Set up Bluetooth connection between your watch (in Settings -> More -> Bluetooth) and computer / phone. Do not use macOS computer, it does not work. Android phone seems to be most compatible.
Upload *.apk file to watch using Bluetooth.
On watch go to Settings -> Tools -> File explorer and select Local -> bluetooth. Click on *.apk file and install it.
Installed application will not be visible from stock Launcher. So I really recommend installing another Launcher as first application.
Launcher
I use Nova Launcher. You need 5.5.4 version, this is the last one compatible with Android 4.4.
Once you install it using installation method described above press power button and it should prompt you which Launcher to use. Select Nova.
And enjoy freedom. It is also surprisingly fast and does not consume more battery than stock one.
If you have Nova Pro purchased you can activate it in two ways:
Use APK extractor on phone where you have Nova Prime activation installed. Dump license application to phone storage and install it the same way as launcher itself. But beware - it must be 2017 or earlier activation package. You cannot dump it from modern phone.
Search for nova_launcher_prime_v2017_full.apk and install this fake license. This is questionable way of activating it. But if you do not have old phone with old license preinstalled you have no other options. I think that if you own legal license on Play Store you will do no harm to developers this way.
Tips:
To avoid being asked for launcher when pressing power button you can disable stock launcher (requires root) through ADB shell: su, and then pm disable com.sgtc.launcher.
This firmware has very aggressive power management and you may notice lag when waking up watch after longer period of time. This is because Nova got killed by operating system and must start from scratch. To avoid it convert Nova launcher to system application (requires root). This can be done using Link2SD application. Open it, search for Nova, click on Nova, click triple dot menu menu and you will have option to convert to system. Remember to have default launcher or ADB enabled while doing this, because you will need one of those to invoke reboot.
Lock screen using button (broken, workarounds available)
If you have two Launchers power button will always prompt for Launcher when pressed on unlocked screen. You cannot change it without root, there is something modified under the hood and even Nova cannot set itself as default Launcher.
The workarounds are to lock screen using icon:
Add Nova action widget and set it to lock screen.
Add Power Toggles widget and add lock screen button to it.
Settings (partially works)
Settings are very simplified compared to stock Android 4.4. I've tried to install stock AOSP Settings APP but it fails. A lot of "hidden settings" applications allows to invoke deep buried panels like HotSpot or lock screen patterns configurations. Tedious job, lot of crashes along the way.
You can also:
Go to engineering mode by dialling *#*#83781#*#*.
Go to Developer Options by using Developer Options Shortcut application.
Status bar (broken, workaround available)
It does not work on any launcher (I tested a few beside Nova). Probably it was so heavily modified that API is no longer compatible. It cannot even be invoked by ADB service call statusbar 1.
The good replacement is Power Toggles, which allows to add widgets with battery level, fast volume profiles switching, enabling Wi-Fi, Bluetooth. Pretty much everything you used status bar for. Except cellular signal strength. I use version 6.0.4.
Tips:
Just as for launcher - aggressive power management will close it as inactive user application after short period. So because it is invoked every time screen is turned on best way to reduce screen wake up time is to convert Power Toggles to system application (requires root). This can be done using Link2SD application. Open it, search for Power Toggles, click on Power Toggles, click triple dot menu menu and you will have option to convert to system. Reboot watch.
You can set different battery colors, which makes it easier to use on small screen. I has mine set up to red (below 20%), yellow (20-80%) and green (above 80%).
You can set how frequent battery indicator is refreshed. By default it is quite laggy.
To get something looking like real status bar disable home screen margins in Nova launcher. Check my screenshot below for final effect.
Notification bar (broken)
Same deal as with Status bar - probably it was so heavily modified that API is no longer compatible with launchers.
You can open notification list service directly from Nova action. But you cannot manage it in any way (like cleaning old notifications) so it is pretty useless long list of accumulated trash.
I haven't found any good replacement.
Luckily Nova launcher notification dots work on applications icons and you can pretty much quickly figure out what just pinged you.
Clock time picker (broken)
By default you manage alarm clocks on this watch through phone application. But if you open on watch stock Android clock app you will see that you cannot set time, only set alarms on and off. Probably some Android component is missing. No fix or workaround yet. Also beware, because once you add alarm using APP on the watch there is no way to remove it - no option in app itself and SeTracker sees only first 3 of them. You will need to clean app data from ADB.
Power management (work in progress)
There are no options to keep app running in background. I'm still searching for good power management app replacement to keep things like WhatsApp or other services running.
For controlling:
screen delay (by default set to annoyingly short 10 seconds)
fine screen brightness
you can use buttons on Power Toggles widget. Once you set it to your preference widget can be removed and settings are remembered after reboot.
Screen rotation (tricky, broken)
Accelerometer is mounted 90 degrees clockwise and stock applications have this tilt compensation hardcoded into them.
This really dumb design has bad consequences:
If accelerometer rotation (auto-rotation) is enabled all "real" applications will think "up" is on the side where power button and flashlight is.
If accelerometer rotation is disabled most "real" applications will stay in fixed portrait orientation (also called user rotation) but some may still rely on accelerometer. The reason is that you can not fully disable accelerometer. Disabled only means "not taken into consideration unless explicitly asked for". And a lot of applications (mostly camera-related) still try to be user friendly and rotates screen the wrong way.
If you mess something up you can lock Screen Rotation again by adding such button on Power Toggles widget and using it.
Or if you have root:
disable accelerometer rotation: settings put system accelerometer_rotation 0
set user rotation to portrait mode: settings put system user_rotation 0
Start sound
Requires root.
First remount /custom in read-write mode: mount -o rw,remount /custom.
Then remove /custom/movies/bootsound.mp3.
Apps recommendations (please share yours)
A lot of "phone" applications work out of the box, assuming you get Android 4.4 compatible versions of them. You can install them the same way as launcher or through ADB. My set is:
Simple Keyboard is perfect for this watch. Disable symbols, set height to 150% and typing will be really comfortable and fast.
Power Toggles. Must have to compensate broken status bar and missing settings.
WhatsApp. Communication freedom. Pretty much you can stop here if you want this watch to be simple device for kid.
VLC for listening audiobooks (although interface does not scale well, looking for something better).
Wulkanowy (polish e-grade book with lessons plan, homework, etc. I assume a lot of people from Poland will come here because of Garett popularity so I'm mentioning it).
Solid Explorer. Built-in explorer is very castrated and crashes often when other apps try to use it (for example to select icon picture or file to share). Solid Explorer is stable and has a lot of built-in format viewers. Unfortunately one cannot run FTP server using it - button to start is off the screen. Bug reported, I hope it will get fixed soon.
OurGroceries. Excellent shopping/checkbox list that can be synchronized between various devices. Very useful to make list of things kid should take to school for example.
Diki. Online dictionary with simple interface that scales very well on this small screen. Translations are straightforward, without tons of magic grammar shortcuts. Allows to listen for words pronunciation.
Stock apps that are preinstalled and work OK:
Dialer
Contacts (you can even import cards from vcf file)
Flashlight
Looking for:
CalDav / CardDav sync (unfortunately there is no accounts management in API and most apps adding Dav support to Android crash).
Call blocker that will reject everything outside contacts list. To protect kid from scammers, marketers and other unwanted calls.
Known to fail:
SMSes. Can be sent but watch management API interrupts receiving to capture push control commands. Installing any other SMS application and setting it as default one breaks watch management from phone application.
WhatsApp. Camera during video calls is upside down.
Google Play Services. Instant crash.
Google Chrome 81. Crashes after few seconds of activity. For all apps that need SystemWebView component to work try Bromite replacement. However in KitKat WebView was not an application and Developer Options has no way of choosing default one. So it may fix very small amount of applications which are self-aware of different WebViews providers.
Google Calendar. Needs working Google Play Services.
F-Droid store. Crashes randomly and may require patience to install anything.
OpenSync. Cannot add any DAV account due to SSL crash.
Wikipedia. No articles can be displayed. Probably due to their latest TLS 1.2 mandatory API switch. However simply bookmarking Wikipedia in Bromite browser works just fine.
ADB and USB debugging
By default those watches are sold with charging cable only, it does not have signal pins. Your life will be a lot easier if you will be able to transfer files directly from your computer to watch and use ADB to do stuff. You can check cable dimensions here: https://allegro.pl/oferta/magnetyczny-kabel-zasilajacy-do-garett-kids-xd-10972606997 . Remember - it must have four pogo pins.
Connecting with cable is straightforward just like when connecting regular phone. Just be aware of two things:
Magnets are not strong enough to press four pins to contact pads. If you have trouble connecting try pressing magnet plug to watch firmly.
This is Android 4.4, so you need ancient knowledge. Like for example there is no "cmd" command available in ADB shell. Some command line switches are very different from what is being used today. Etc.
You can set USB to file transfer mode. Android File Transfer desktop application works perfectly and transfers are surprisingly fast. Probably it is the most convenient way to transfer applications, audiobooks and music to this watch.
Root
Based on https://github.com/eisaev/SuperSUInstaller process.
Install Developer Options Shortcut. Installation method is irrelevant. You can do it the same way as Launcher installation described above. Or if you already have more advanced stuff installed you can use an file transfer method and any file manager to do it.
Run Developer Options Shortcut and enable USB debugging.
Install SuperSU Installer. Again installation method is irrelevant.
Run SuperSU Installer. Wait for Hello World message and go back to Launcher.
In Local files on the watch there should be new SuperSU Manager APK generated. Install it but do not open.
Restart watch.
Disable WiFi and Bluetooth.
Connect USB cable.
Open dialer and enter *#*#83781#*#*. Engineering settings will open.
Go to CONNECTIVITY tab.
Click Start Service.
Click Wifi eut and confirm popup.
run adb shell on your computer
in shell enter: am start --user 0 -n ru.eisaev.supersuinstaller/.MainActivity
Wait for Hello world message on watch screen.
In shell enter: am start --user 0 -n eu.chainfire.supersu/.MainActivity
On watch screen SuperSU Manager should pop up and offer binary update. Choose Normal mode.
Restart watch.
Open SuperSU Manager. Method is irrelevant, can be clicked from Nova launcher or invoked from ADB like in 16.
Go to Settings and set Default access to Grant.
Confirm that you have root access by going to ADB shell and invoking: su
Clean up all files generated by SuperSU Installer from Local directory on the watch.
This method slightly diverges from original because users are different and because SuperSU Installer crashes when leaving to desktop using home button. Making it impossible to go from step 8 to 9 described in original method.
So for Installer and Manager to see each other at the same time you need to do this weird loop: install Installer which generates Manager which you can install prematurely to be able to later fire up both Installer and Manager at the same time from ADB without using watch home button.
Kudos for eisaev for discovering this process and building SuperSU!
My result
Home screen of Nova launcher:
Power Toggles bar on top emulates status bar. It handles battery info, fast volume and brightness settings and connectivity settings.
Two Nova action widgets added on the bottom - one for power off, second one for applications list.
Application list:
Nova allows to hide applications, so I used it to hide everything kid is not supposed to mess with. Like settings of various sort.
Many apps like Calculator or Gallery I've extracted directly from my old Android 4.4 phone.
Keyboard:
Simple Keyboard is far more usable and fast than stock keyboard. Kid has no problem with typing on it. However just as on stock keyboard you have to type blindly and occasionally minimize keyboard to verify what you've typed.
Please contribute
If you have found solution to any of mentioned problems, encountered new problem on your own or just found good app please share in comments.
bbkr said:
Brands
My specific watch that I used to experiment with is G4P, bought straight from Chinese factory:
View attachment 5407991
However almost everything from this thread applies to any watch running on SP9820E SoC, like G4E or G4H series.
Those watches are also often rebranded and sold as: Kinyo, Garett, Lemfo, Wonlex, Locon and many more.
Just check in spec if it is running on 9820E chip and you are good to go.
Reasons for modding
Those watches by default use very limited set of very simple applications presented in most ugly launcher and icon sets achievable by humans.
You can not install any extra applications and what you get from the box is very disappointing.
Also they are meant to be managed exclusively by corresponding phone application like SeTracker 2 (or rebrands like Garett Tracker),
which means you need to send your data to Chinese service and use WeeChat for chats/video calls, whether you like it or not.
This is true shame, because SP9820E is quite powerful hardware, here is GeekBench score.
Do not be fooled by oversimplified stock software - you can run pretty much any "real" application on it.
Luckily because those watches use Android under the hood you can transform them to something more feature-rich and more pleasant to use.
Android KitKat is NOT Android Wear
Those watches use Android 4.4, codename KitKat. Just like old phones. Please do not confuse it with Android Wear operating system and do not try to use applications built for Android Wear. Whatever you use must be Android 4.4 compatible, anything newer won't install at all. Android on this watch is heavily modified, lacks some components and you will run into many crashes or weird behaviour. Sections below will help you to navigate through those issues.
Also applications back in KitKat era were not designed with watch screens in mind, so expect bad interface scaling, not accessible buttons and huge or microscopic fonts.
How to install any application from stock Launcher?
Get application *.apk file from trusted site.
Set up Bluetooth connection between your watch (in Settings -> More -> Bluetooth) and computer / phone. Do not use macOS computer, it does not work. Android phone seems to be most compatible.
Upload *.apk file to watch using Bluetooth.
On watch go to Settings -> Tools -> File explorer and select Local -> bluetooth. Click on *.apk file and install it.
Installed application will not be visible from stock Launcher. So I really recommend installing another Launcher as first application.
Launcher
I use Nova Launcher. You need 5.5.4 version, this is the last one compatible with Android 4.4.
Once you install it using installation method described above press power button and it should prompt you which Launcher to use. Select Nova.
And enjoy freedom. It is also surprisingly fast and does not consume more battery than stock one.
If you have Nova Pro purchased you can activate it in two ways:
Use APK extractor on phone where you have Nova Prime activation installed. Dump license application to phone storage and install it the same way as launcher itself. But beware - it must be 2017 or earlier activation package. You cannot dump it from modern phone.
Search for nova_launcher_prime_v2017_full.apk and install this fake license. This is questionable way of activating it. But if you do not have old phone with old license preinstalled you have no other options. I think that if you own legal license on Play Store you will do no harm to developers this way.
Tips:
To avoid being asked for launcher when pressing power button you can disable stock launcher (requires root) through ADB shell: su, and then pm disable com.sgtc.launcher.
This firmware has very aggressive power management and you may notice lag when waking up watch after longer period of time. This is because Nova got killed by operating system and must start from scratch. To avoid it convert Nova launcher to system application (requires root). This can be done using Link2SD application. Open it, search for Nova, click on Nova, click triple dot menu menu and you will have option to convert to system. Remember to have default launcher or ADB enabled while doing this, because you will need one of those to invoke reboot.
Lock screen using button (broken, workarounds available)
If you have two Launchers power button will always prompt for Launcher when pressed on unlocked screen. You cannot change it without root, there is something modified under the hood and even Nova cannot set itself as default Launcher.
The workarounds are to lock screen using icon:
Add Nova action widget and set it to lock screen.
Add Power Toggles widget and add lock screen button to it.
Settings (partially works)
Settings are very simplified compared to stock Android 4.4. I've tried to install stock AOSP Settings APP but it fails. A lot of "hidden settings" applications allows to invoke deep buried panels like HotSpot or lock screen patterns configurations. Tedious job, lot of crashes along the way.
You can also:
*#*#83781#*#*.
Developer Options Shortcut application.
Status bar (broken, workaround available)
It does not work on any launcher (I tested a few beside Nova). Probably it was so heavily modified that API is no longer compatible. It cannot even be invoked by ADB service call statusbar 1.
The good replacement is Power Toggles, which allows to add widgets with battery level, fast volume profiles switching, enabling Wi-Fi, Bluetooth. Pretty much everything you used status bar for. Except cellular signal strength. I use version 6.0.4.
Tips:
Just as for launcher - aggressive power management will close it as inactive user application after short period. So because it is invoked every time screen is turned on best way to reduce screen wake up time is to convert Power Toggles to system application (requires root). This can be done using Link2SD application. Open it, search for Power Toggles, click on Power Toggles, click triple dot menu menu and you will have option to convert to system. Reboot watch.
You can set different battery colors, which makes it easier to use on small screen. I has mine set up to red (below 20%), yellow (20-80%) and green (above 80%).
You can set how frequent battery indicator is refreshed. By default it is quite laggy.
To get something looking like real status bar disable home screen margins in Nova launcher. Check my screenshot below for final effect.
Notification bar (broken)
Same deal as with Status bar - probably it was so heavily modified that API is no longer compatible with launchers.
You can open notification list service directly from Nova action. But you cannot manage it in any way (like cleaning old notifications) so it is pretty useless long list of accumulated trash.
I haven't found any good replacement.
Luckily Nova launcher notification dots work on applications icons and you can pretty much quickly figure out what just pinged you.
Clock time picker (broken)
By default you manage alarm clocks on this watch through phone application. But if you open on watch stock Android clock app you will see that you cannot set time, only set alarms on and off. Probably some Android component is missing. No fix or workaround yet. Also beware, because once you add alarm using APP on the watch there is no way to remove it - no option in app itself and SeTracker sees only first 3 of them. You will need to clean app data from ADB.
Power management (work in progress)
There are no options to keep app running in background. I'm still searching for good power management app replacement to keep things like WhatsApp or other services running.
For controlling:
screen delay (by default set to annoyingly short 10 seconds)
fine screen brightness
Power Toggles widget. Once you set it to your preference widget can be removed and settings are remembered after reboot.
Screen rotation (tricky, broken)
Accelerometer is mounted 90 degrees clockwise and stock applications have this tilt compensation hardcoded into them.
This really dumb design has bad consequences:
If accelerometer rotation (auto-rotation) is enabled all "real" applications will think "up" is on the side where power button and flashlight is.
If accelerometer rotation is disabled most "real" applications will stay in fixed portrait orientation (also called user rotation) but some may still rely on accelerometer. The reason is that you can not fully disable accelerometer. Disabled only means "not taken into consideration unless explicitly asked for". And a lot of applications (mostly camera-related) still try to be user friendly and rotates screen the wrong way.
If you mess something up you can lock Screen Rotation again by adding such button on Power Toggles widget and using it.
Or if you have root:
disable accelerometer rotation: settings put system accelerometer_rotation 0
set user rotation to portrait mode: settings put system user_rotation 0
Start sound
Requires root. Remove /custom/movies/bootsound.mp3.
Apps recommendations (please share yours)
A lot of "phone" applications work out of the box, assuming you get Android 4.4 compatible versions of them. You can install them the same way as launcher or through ADB. My set is:
Simple Keyboard is perfect for this watch. Disable symbols, set height to 150% and typing will be really comfortable and fast.
Power Toggles. Must have to compensate broken status bar and missing settings.
WhatsApp. Communication freedom. Pretty much you can stop here if you want this watch to be simple device for kid.
VLC for listening audiobooks (although interface does not scale well, looking for something better).
Wulkanowy (polish e-grade book with lessons plan, homework, etc. I assume a lot of people from Poland will come here because of Garett popularity so I'm mentioning it).
Solid Explorer. Built-in explorer is very castrated and crashes often when other apps try to use it (for example to select icon picture or file to share). Solid Explorer is stable and has a lot of built-in format viewers. Unfortunately one cannot run FTP server using it - button to start is off the screen. Bug reported, I hope it will get fixed soon.
OurGroceries. Excellent shopping/checkbox list that can be synchronized between various devices. Very useful to make list of things kid should take to school for example.
Diki. Online dictionary with simple interface that scales very well on this small screen. Translations are straightforward, without tons of magic grammar shortcuts. Allows to listen for words pronunciation.
Stock apps that are preinstalled and work OK:
Dialer
Contacts (you can even import cards from vcf file)
Flashlight
Looking for:
CalDav / CardDav sync (unfortunately there is no accounts management in API and most apps adding Dav support to Android crash).
Call blocker that will reject everything outside contacts list. To protect kid from scammers, marketers and other unwanted calls.
Known to fail:
SMSes. Can be sent but watch management API interrupts receiving to capture push control commands. Installing any other SMS application and setting it as default one breaks watch management from phone application.
WhatsApp. Camera during video calls is upside down.
Google Play Services. Instant crash.
Google Chrome 81. Crashes after few seconds of activity. For all apps that need SystemWebView component to work try Bromite replacement. However in KitKat WebView was not an application and Developer Options has no way of choosing default one. So it may fix very small amount of applications which are self-aware of different WebViews providers.
Google Calendar. Needs working Google Play Services.
F-Droid store. Crashes randomly and may require patience to install anything.
OpenSync. Cannot add any DAV account due to SSL crash.
Wikipedia. No articles can be displayed. Probably due to their latest TLS 1.2 mandatory API switch. However simply bookmarking Wikipedia in Bromite browser works just fine.
ADB and USB debugging
By default those watches are sold with charging cable only, it does not have signal pins. Your life will be a lot easier if you will be able to transfer files directly from your computer to watch and use ADB to do stuff. You can check cable dimensions here: https://allegro.pl/oferta/magnetyczny-kabel-zasilajacy-do-garett-kids-xd-10972606997 . Remember - it must have four pogo pins.
Connecting with cable is straightforward just like when connecting regular phone. Just be aware of two things:
Magnets are not strong enough to press four pins to contact pads. If you have trouble connecting try pressing magnet plug to watch firmly.
This is Android 4.4, so you need ancient knowledge. Like for example there is no "cmd" command available in ADB shell. Some command line switches are very different from what is being used today. Etc.
You can set USB to file transfer mode. Android File Transfer desktop application works perfectly and transfers are surprisingly fast. Probably it is the most convenient way to transfer applications, audiobooks and music to this watch.
Root
Based on https://github.com/eisaev/SuperSUInstaller process.
Developer Options Shortcut. Installation method is irrelevant. You can do it the same way as Launcher installation described above. Or if you already have more advanced stuff installed you can use an file transfer method and any file manager to do it.
Developer Options Shortcut and enable USB debugging.
SuperSU Installer. Again installation method is irrelevant.
SuperSU Installer. Wait for Hello World message and go back to Launcher.
In Local files on the watch there should be new SuperSU Manager APK generated. Install it but do not open.
Restart watch.
Disable WiFi and Bluetooth.
Connect USB cable.
Open dialer and enter *#*#83781#*#*. Engineering settings will open.
Go to CONNECTIVITY tab.
Start Service.
Wifi eut and confirm popup.
run adb shell on your computer
in shell enter: am start --user 0 -n ru.eisaev.supersuinstaller/.MainActivity
Wait for Hello world message on watch screen.
In shell enter: am start --user 0 -n eu.chainfire.supersu/.MainActivity
On watch screen SuperSU Manager should pop up and offer binary update. Choose Normal mode.
Restart watch.
Open SuperSU Manager. Method is irrelevant, can be clicked from Nova launcher or invoked from ADB like in 16.
Go to Settings and set Default access to Grant.
Confirm that you have root access by going to ADB shell and invoking: su
Clean up all files generated by SuperSU Installer from Local directory on the watch.
This method slightly diverges from original because users are different and because SuperSU Installer crashes when leaving to desktop using home button. Making it impossible to go from step 8 to 9 described in original method.
So for Installer and Manager to see each other at the same time you need to do this weird loop: install Installer which generates Manager which you can install prematurely to be able to later fire up both Installer and Manager at the same time from ADB without using watch home button.
Kudos for eisaev for discovering this process and building SuperSU!
My result
Home screen of Nova launcher:
View attachment 5420419
bar on top emulates status bar. It handles battery info, fast volume and brightness settings and connectivity settings.
Two Nova action widgets added on the bottom - one for power off, second one for applications list.
Application list:
View attachment 5420423
Nova allows to hide applications, so I used it to hide everything kid is not supposed to mess with. Like settings of various sort.
Many apps like Calculator or Gallery I've extracted directly from my old Android 4.4 phone.
Keyboard:
View attachment 5420427
Simple Keyboard is far more usable and fast than stock keyboard. Kid has no problem with typing on it. However just as on stock keyboard you have to type blindly and occasionally minimize keyboard to verify what you've typed.
Please contribute
If you have found solution to any of mentioned problems, encountered new problem on your own or just found good app please share in comments.
Click to expand...
Click to collapse
I bought this watch for my child, but when I want to use another tracking program other than the se tracker program, I cannot change the ip number. Can you help me with this? Since I couldn't find any more resources about g4h, I asked for help under this topic. The link to the watch I actually bought is below. If I can change the server of the watch with the sms sent to the watch, maybe I can switch to an application other than tracker. Engineering mode opens but I don't know how to do it.
Find my kids application server: pw,123456,ip,tcp.findmykids.org,8001#
https://tr.aliexpress.com/item/1005002878573395.html?spm=a2g0s.9042311.0.0.1cc04c4dVwpHt3
got one watch with the same chipset, but it is running at Android 8.1. any idea for root it?
already try above way to to do it. but it was failed.
rootzero7 said:
got one watch with the same chipset, but it is running at Android 8.1. any idea for root it?
already try above way to to do it. but it was failed.
Click to expand...
Click to collapse
No model name, no build version... with amount of details you provided you won't get an answer.
afyden2018 said:
I bought this watch for my child, but when I want to use another tracking program other than the se tracker program, I cannot change the ip number. Can you help me with this? Since I couldn't find any more resources about g4h, I asked for help under this topic. The link to the watch I actually bought is below. If I can change the server of the watch with the sms sent to the watch, maybe I can switch to an application other than tracker. Engineering mode opens but I don't know how to do it.
Find my kids application server: pw,123456,ip,tcp.findmykids.org,8001#
https://tr.aliexpress.com/item/1005002878573395.html?spm=a2g0s.9042311.0.0.1cc04c4dVwpHt3
Click to expand...
Click to collapse
What you want is not possible.
Findmykids.org and SE Tracker do not speak the same protocol, it is not the matter of simply changing IP.
Also findmykids.org service running on watch is for Android 5.0 and up, while this watch runs on Android 4.4.
By the way: location reporting IP is stored in /custom/config. You can remount storage it in read-write mode and change it, but as I said earlier this is pointless. What you need is Android Service running on the watch, reporting to findmykids.org in data format expected by this site.
here is some detail for this watch. it comes NO band name.
chipset,
processor : 0
model name : ARMv8 Processor
BogoMIPS : 52.00
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
processor : 1
model name : ARMv8 Processor
BogoMIPS : 52.00
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm aes pmull sha1 sha2 crc32
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
Hardware : Spreadtrum SC9820e
Revision : 0000
Serial : 0000000000000000
re : Spreadtrum SC9820e
Revision : 0000
Serial : 0000000000000000
getprop | grep ver
[persist.sys.android.version]: [9.0]
[ro.build.version.release]: [8.1.0]
[ro.build.version.sdk]: [27]
[ro.build.version.security_patch]: [2019-11-05]
kernel info.
Linux localhost 4.4.83+ #1 SMP PREEMPT Fri Aug 20 17:30:34 CST 2021 armv7l
install the SuperSUInstaller apk file and launched it .
adb logcat says the connection was denied by SElinux. also there is no cmd_services running when "enable wifi eut". which "superSUinstaller" needs it to run on.
also by dig the system, it seems like the SELinux was misconfigured somehow.
does it work on android 9
because i try to root LEMFO LEMP
and got this message
DMN_C16_TFT_PIX32:/ $ am start --user 0 -n ru.eisaev.supersuinstaller/.MainActivity
Starting: Intent { cmp=ru.eisaev.supersuinstaller/.MainActivity }
DMN_C16_TFT_PIX32:/ $ am start --user 0 -n eu.chainfire.supersu/.MainActivity
Starting: Intent { cmp=eu.chainfire.supersu/.MainActivity }
Error type 3
Error: Activity class {eu.chainfire.supersu/eu.chainfire.supersu.MainActivity} does not exist.
i realy need solution for root this Sh*t devices
Great tutorial!
I bought polish Garett kids 4g and I want to play with it a little bit (it's not only for kids but also for daddies ).
1. I installed WhatsApp (KitKat version) and it works great. Surprisingly I can see it in the default launcher next to "steps" ("kroki") and "QR code". How it is possible and how to do it with other apps?
2. When I change watch faces I can see a little weather icon on the preview. But when I choose one there is no weather. Do you know what weather application is missing and how to force it to show weather on the watch face?
Thanks alot! I asked for the firmware from chinese's seller, and I had got a link:
QQ邮箱中转站文件
mail.qq.com
ivvitan said:
Thanks alot! I asked for the firmware from chinese's seller, and I had got a link:
QQ邮箱中转站文件
mail.qq.com
Click to expand...
Click to collapse
Hello,I have a watch of the same model, but I don't know how to brush it. I tried SPD_ Research_ Tool, the driver is also installed. I tried to insert the data cable when the watch is shutting down, but the Tool reported an error "user cancel". Can you tell me how you brush the watch?Thanks.
Is there a possibility of putting an android later than android 4.4 in these watches?
Surely there must be a dev on xda who could port a rom to this watch.. anyone ?
bbkr said:
State of market
Do NOT buy this watch. It looks like excellent value for money, but much modern H1 / W5 series with Android 9 and full Play Store just hit the shelves on AliExpress for almost the same price.
If mine arrives I'll create separate thread about them.
Brands
My specific watch that I used to experiment with is G4P, bought straight from Chinese factory:
View attachment 5407991
However almost everything from this thread applies to any watch running on SP9820E SoC, like G4E or G4H series.
Those watches are also often rebranded and sold as: Kinyo, Garett, Lemfo, Wonlex, Locon and many more.
Just check in spec if it is running on 9820E chip and you are good to go.
Reasons for modding
Those watches by default use very limited set of very simple applications presented in most ugly launcher and icon sets achievable by humans.
You can not install any extra applications and what you get from the box is very disappointing.
Also they are meant to be managed exclusively by corresponding phone application like SeTracker 2 (or rebrands like Garett Tracker),
which means you need to send your data to Chinese service and use WeeChat for chats/video calls, whether you like it or not.
This is true shame, because SP9820E is quite powerful hardware, here is GeekBench score.
Do not be fooled by oversimplified stock software - you can run pretty much any "real" application on it.
Luckily because those watches use Android under the hood you can transform them to something more feature-rich and more pleasant to use.
Android KitKat is NOT Android Wear
Those watches use Android 4.4, codename KitKat. Just like old phones. Please do not confuse it with Android Wear operating system and do not try to use applications built for Android Wear. Whatever you use must be Android 4.4 compatible, anything newer won't install at all. Android on this watch is heavily modified, lacks some components and you will run into many crashes or weird behaviour. Sections below will help you to navigate through those issues.
Also applications back in KitKat era were not designed with watch screens in mind, so expect bad interface scaling, not accessible buttons and huge or microscopic fonts.
How to install any application from stock Launcher?
Get application *.apk file from trusted site.
Set up Bluetooth connection between your watch (in Settings -> More -> Bluetooth) and computer / phone. Do not use macOS computer, it does not work. Android phone seems to be most compatible.
Upload *.apk file to watch using Bluetooth.
On watch go to Settings -> Tools -> File explorer and select Local -> bluetooth. Click on *.apk file and install it.
Installed application will not be visible from stock Launcher. So I really recommend installing another Launcher as first application.
Launcher
I use Nova Launcher. You need 5.5.4 version, this is the last one compatible with Android 4.4.
Once you install it using installation method described above press power button and it should prompt you which Launcher to use. Select Nova.
And enjoy freedom. It is also surprisingly fast and does not consume more battery than stock one.
If you have Nova Pro purchased you can activate it in two ways:
Use APK extractor on phone where you have Nova Prime activation installed. Dump license application to phone storage and install it the same way as launcher itself. But beware - it must be 2017 or earlier activation package. You cannot dump it from modern phone.
Search for nova_launcher_prime_v2017_full.apk and install this fake license. This is questionable way of activating it. But if you do not have old phone with old license preinstalled you have no other options. I think that if you own legal license on Play Store you will do no harm to developers this way.
Tips:
To avoid being asked for launcher when pressing power button you can disable stock launcher (requires root) through ADB shell: su, and then pm disable com.sgtc.launcher.
This firmware has very aggressive power management and you may notice lag when waking up watch after longer period of time. This is because Nova got killed by operating system and must start from scratch. To avoid it convert Nova launcher to system application (requires root). This can be done using Link2SD application. Open it, search for Nova, click on Nova, click triple dot menu menu and you will have option to convert to system. Remember to have default launcher or ADB enabled while doing this, because you will need one of those to invoke reboot.
Lock screen using button (broken, workarounds available)
If you have two Launchers power button will always prompt for Launcher when pressed on unlocked screen. You cannot change it without root, there is something modified under the hood and even Nova cannot set itself as default Launcher.
The workarounds are to lock screen using icon:
Add Nova action widget and set it to lock screen.
Add Power Toggles widget and add lock screen button to it.
Settings (partially works)
Settings are very simplified compared to stock Android 4.4. I've tried to install stock AOSP Settings APP but it fails. A lot of "hidden settings" applications allows to invoke deep buried panels like HotSpot or lock screen patterns configurations. Tedious job, lot of crashes along the way.
You can also:
Go to engineering mode by dialling *#*#83781#*#*.
Go to Developer Options by using Developer Options Shortcut application.
Status bar (broken, workaround available)
It does not work on any launcher (I tested a few beside Nova). Probably it was so heavily modified that API is no longer compatible. It cannot even be invoked by ADB service call statusbar 1.
The good replacement is Power Toggles, which allows to add widgets with battery level, fast volume profiles switching, enabling Wi-Fi, Bluetooth. Pretty much everything you used status bar for. Except cellular signal strength. I use version 6.0.4.
Tips:
Just as for launcher - aggressive power management will close it as inactive user application after short period. So because it is invoked every time screen is turned on best way to reduce screen wake up time is to convert Power Toggles to system application (requires root). This can be done using Link2SD application. Open it, search for Power Toggles, click on Power Toggles, click triple dot menu menu and you will have option to convert to system. Reboot watch.
You can set different battery colors, which makes it easier to use on small screen. I has mine set up to red (below 20%), yellow (20-80%) and green (above 80%).
You can set how frequent battery indicator is refreshed. By default it is quite laggy.
To get something looking like real status bar disable home screen margins in Nova launcher. Check my screenshot below for final effect.
Notification bar (broken)
Same deal as with Status bar - probably it was so heavily modified that API is no longer compatible with launchers.
You can open notification list service directly from Nova action. But you cannot manage it in any way (like cleaning old notifications) so it is pretty useless long list of accumulated trash.
I haven't found any good replacement.
Luckily Nova launcher notification dots work on applications icons and you can pretty much quickly figure out what just pinged you.
Clock time picker (broken)
By default you manage alarm clocks on this watch through phone application. But if you open on watch stock Android clock app you will see that you cannot set time, only set alarms on and off. Probably some Android component is missing. No fix or workaround yet. Also beware, because once you add alarm using APP on the watch there is no way to remove it - no option in app itself and SeTracker sees only first 3 of them. You will need to clean app data from ADB.
Power management (work in progress)
There are no options to keep app running in background. I'm still searching for good power management app replacement to keep things like WhatsApp or other services running.
For controlling:
screen delay (by default set to annoyingly short 10 seconds)
fine screen brightness
you can use buttons on Power Toggles widget. Once you set it to your preference widget can be removed and settings are remembered after reboot.
Screen rotation (tricky, broken)
Accelerometer is mounted 90 degrees clockwise and stock applications have this tilt compensation hardcoded into them.
This really dumb design has bad consequences:
If accelerometer rotation (auto-rotation) is enabled all "real" applications will think "up" is on the side where power button and flashlight is.
If accelerometer rotation is disabled most "real" applications will stay in fixed portrait orientation (also called user rotation) but some may still rely on accelerometer. The reason is that you can not fully disable accelerometer. Disabled only means "not taken into consideration unless explicitly asked for". And a lot of applications (mostly camera-related) still try to be user friendly and rotates screen the wrong way.
If you mess something up you can lock Screen Rotation again by adding such button on Power Toggles widget and using it.
Or if you have root:
disable accelerometer rotation: settings put system accelerometer_rotation 0
set user rotation to portrait mode: settings put system user_rotation 0
Start sound
Requires root.
First remount /custom in read-write mode: mount -o rw,remount /custom.
Then remove /custom/movies/bootsound.mp3.
Apps recommendations (please share yours)
A lot of "phone" applications work out of the box, assuming you get Android 4.4 compatible versions of them. You can install them the same way as launcher or through ADB. My set is:
Simple Keyboard is perfect for this watch. Disable symbols, set height to 150% and typing will be really comfortable and fast.
Power Toggles. Must have to compensate broken status bar and missing settings.
WhatsApp. Communication freedom. Pretty much you can stop here if you want this watch to be simple device for kid.
VLC for listening audiobooks (although interface does not scale well, looking for something better).
Wulkanowy (polish e-grade book with lessons plan, homework, etc. I assume a lot of people from Poland will come here because of Garett popularity so I'm mentioning it).
Solid Explorer. Built-in explorer is very castrated and crashes often when other apps try to use it (for example to select icon picture or file to share). Solid Explorer is stable and has a lot of built-in format viewers. Unfortunately one cannot run FTP server using it - button to start is off the screen. Bug reported, I hope it will get fixed soon.
OurGroceries. Excellent shopping/checkbox list that can be synchronized between various devices. Very useful to make list of things kid should take to school for example.
Diki. Online dictionary with simple interface that scales very well on this small screen. Translations are straightforward, without tons of magic grammar shortcuts. Allows to listen for words pronunciation.
Stock apps that are preinstalled and work OK:
Dialer
Contacts (you can even import cards from vcf file)
Flashlight
Looking for:
CalDav / CardDav sync (unfortunately there is no accounts management in API and most apps adding Dav support to Android crash).
Call blocker that will reject everything outside contacts list. To protect kid from scammers, marketers and other unwanted calls.
Known to fail:
SMSes. Can be sent but watch management API interrupts receiving to capture push control commands. Installing any other SMS application and setting it as default one breaks watch management from phone application.
WhatsApp. Camera during video calls is upside down.
Google Play Services. Instant crash.
Google Chrome 81. Crashes after few seconds of activity. For all apps that need SystemWebView component to work try Bromite replacement. However in KitKat WebView was not an application and Developer Options has no way of choosing default one. So it may fix very small amount of applications which are self-aware of different WebViews providers.
Google Calendar. Needs working Google Play Services.
F-Droid store. Crashes randomly and may require patience to install anything.
OpenSync. Cannot add any DAV account due to SSL crash.
Wikipedia. No articles can be displayed. Probably due to their latest TLS 1.2 mandatory API switch. However simply bookmarking Wikipedia in Bromite browser works just fine.
ADB and USB debugging
By default those watches are sold with charging cable only, it does not have signal pins. Your life will be a lot easier if you will be able to transfer files directly from your computer to watch and use ADB to do stuff. You can check cable dimensions here: https://allegro.pl/oferta/magnetyczny-kabel-zasilajacy-do-garett-kids-xd-10972606997 . Remember - it must have four pogo pins.
Connecting with cable is straightforward just like when connecting regular phone. Just be aware of two things:
Magnets are not strong enough to press four pins to contact pads. If you have trouble connecting try pressing magnet plug to watch firmly.
This is Android 4.4, so you need ancient knowledge. Like for example there is no "cmd" command available in ADB shell. Some command line switches are very different from what is being used today. Etc.
You can set USB to file transfer mode. Android File Transfer desktop application works perfectly and transfers are surprisingly fast. Probably it is the most convenient way to transfer applications, audiobooks and music to this watch.
Root
Based on https://github.com/eisaev/SuperSUInstaller process.
Install Developer Options Shortcut. Installation method is irrelevant. You can do it the same way as Launcher installation described above. Or if you already have more advanced stuff installed you can use an file transfer method and any file manager to do it.
Run Developer Options Shortcut and enable USB debugging.
Install SuperSU Installer. Again installation method is irrelevant.
Run SuperSU Installer. Wait for Hello World message and go back to Launcher.
In Local files on the watch there should be new SuperSU Manager APK generated. Install it but do not open.
Restart watch.
Disable WiFi and Bluetooth.
Connect USB cable.
Open dialer and enter *#*#83781#*#*. Engineering settings will open.
Go to CONNECTIVITY tab.
Click Start Service.
Click Wifi eut and confirm popup.
run adb shell on your computer
in shell enter: am start --user 0 -n ru.eisaev.supersuinstaller/.MainActivity
Wait for Hello world message on watch screen.
In shell enter: am start --user 0 -n eu.chainfire.supersu/.MainActivity
On watch screen SuperSU Manager should pop up and offer binary update. Choose Normal mode.
Restart watch.
Open SuperSU Manager. Method is irrelevant, can be clicked from Nova launcher or invoked from ADB like in 16.
Go to Settings and set Default access to Grant.
Confirm that you have root access by going to ADB shell and invoking: su
Clean up all files generated by SuperSU Installer from Local directory on the watch.
This method slightly diverges from original because users are different and because SuperSU Installer crashes when leaving to desktop using home button. Making it impossible to go from step 8 to 9 described in original method.
So for Installer and Manager to see each other at the same time you need to do this weird loop: install Installer which generates Manager which you can install prematurely to be able to later fire up both Installer and Manager at the same time from ADB without using watch home button.
Kudos for eisaev for discovering this process and building SuperSU!
My result
Home screen of Nova launcher:
View attachment 5420419
Power Toggles bar on top emulates status bar. It handles battery info, fast volume and brightness settings and connectivity settings.
Two Nova action widgets added on the bottom - one for power off, second one for applications list.
Application list:
View attachment 5420423
Nova allows to hide applications, so I used it to hide everything kid is not supposed to mess with. Like settings of various sort.
Many apps like Calculator or Gallery I've extracted directly from my old Android 4.4 phone.
Keyboard:
View attachment 5420427
Simple Keyboard is far more usable and fast than stock keyboard. Kid has no problem with typing on it. However just as on stock keyboard you have to type blindly and occasionally minimize keyboard to verify what you've typed.
Please contribute
If you have found solution to any of mentioned problems, encountered new problem on your own or just found good app please share in comments.
Click to expand...
Click to collapse
thank for this tutorial

Categories

Resources