Related
Finally we have a guide to unlock the bootloader of Meizu m2 note. We need Mediatek SP Flash Tool, MTK phone drivers and the images/bin files for unlocking. No modaco superboot, no fake tutorials any more
Now here's the guide:
1. Download the files I provide
Then unzip it. You'll get a folder with FlashTool, Phone drivers and unlock images.
2.Install drivers for Mediatek platform.
3.Flash the temp-unlock-secro.img via Flashtool.
4.Flash secro.img, lk.bin, preloader_meizu6753_65c_l1.bin via Flashtool.
5.Disconnect USB data cable and power on the phone. If you see the "=>Normal boot" sign(it's quite small.......) in the left bottom cornor of the screen, then the unlock is done. You can now flash things in whatever way you like. The guide is over~~~
The full tutorial is here:https://mega.nz/#!zJxmBDAA!VyYLgPoOfx1P4O7WzSvKVycnbWnYPESzazZGOoIt15w
The unlock tool is here:https://mega.nz/#!zA4zQT4B!c8W5IBPmmglAHwfzhqN3AOnYC2Rs1a_ToRLNBSLCXT8
Thank you for testing&trying!
Update: New link for the unlock tutorial and tools(Google Drive), since I lost my MEGA drive account's master key and I can no longer access to that account xDD
https://drive.google.com/file/d/1mVXr8b7i_H0dUd_ygdlQ882AERBuIczD/view?usp=sharing
https://drive.google.com/file/d/1v2bX8hRdtaVg-VP-VGqhzBpw0pAQeo1C/view?usp=sharing
2020/04/20 Update:IDK if there's still people using m2note, but it seems that GDrive has taken my files down, so here goes another link on OneDrive/Sharepoint, including unlock tools&guide&scatter file which can expand your system partition to 2G/2.5G(not made by me though),use with caution:
https://freeshadow-my.sharepoint.co...1Ci_6r_02ZZVMBDclrX_Zocv6FEdTzl_Co0w?e=mOX7RZ
Hey brother.we had already made 3 mouth hack in meizu m1 metal.But m1metal's system is powed by yunos.so we cannot get root until now.Nowadays,we can flash mx5 system.img by dd if so on flash command,but still unable to get root.I think its uboot's problem.I hope you can help us. 300billions m1 metal user need your help .thk you
Sent from my HTC M8d using XDA-Developers mobile app
aaawqw said:
Finally we have a guide to unlock the bootloader of Meizu m2 note. We need Mediatek SP Flash Tool, MTK phone drivers and the images/bin files for unlocking. No modaco superboot, no fake tutorials ant more
Now here's the guide:
1. Download the files I provide
Then unzip it. You'll get a folder with FlashTool, Phone drivers and unlock images.
2.Install drivers for Mediatek platform.
3.Flash the temp-unlock-secro.img via Flashtool.
4.Flash secro.img, lk.bin, preloader_meizu6753_65c_l1.bin via Flashtool.
5.Disconnect USB data cable and power on the phone. If you see the "=>Normal boot" sign(it's quite small.......) in the left bottom cornor of the screen, then the unlock is done. You can now flash things in whatever way you like. The guide is over~~~
I hope xda-developers can help work out a recovery image:fingers-crossed::fingers-crossed: If you can port the recovery and it works well, just leave a comment here I need that very much
PS: I tried to port a TWRP recovery from Elephone P8000 but the screen is upside down I tried to add ro.sf.hwrotation=180 in default.prop but it didn't work And I also tried to add setprop ro.sf.hwrotation 180 in init.rc. It didn't work as well:crying: Who can help fix this? Or I need to compile the TWRP myself?)
The full tutorial is here:https://mega.nz/#!zJxmBDAA!VyYLgPoOfx1P4O7WzSvKVycnbWnYPESzazZGOoIt15w
The unlock tool is here:https://mega.nz/#!zA4zQT4B!c8W5IBPmmglAHwfzhqN3AOnYC2Rs1a_ToRLNBSLCXT8
Thank you for testing&trying!
Click to expand...
Click to collapse
Some screenshots of unlock~~~
It shows it is still locked but we are able to flash recovery via fastboot or flashtool
[email protected] said:
Hey brother.we had already made 3 mouth hack in meizu m1 metal.But m1metal's system is powed by yunos.so we cannot get root until now.Nowadays,we can flash mx5 system.img by dd if so on flash command,but still unable to get root.I think its uboot's problem.I hope you can help us. 300billions m1 metal user need your help .thk you
Sent from my HTC M8d using XDA-Developers mobile app
Click to expand...
Click to collapse
M1 metal is powered by YunOS, and it have a system service called"AntiRoot". As we all know, the antiroot in YunOS is very powerful which is extremely hard to hack. Now you can only use Kingroot to get "Fake Root",which can't edit the system partition. I'm using m2 note(M571) so I can't help u about that, sorry
Oh, and remember this tutorial WON'T WORK on Meizu M571C (meizu m2 note China Telecom version ). We are still working on that but we don't have the phone to test our work.
meizu os version
using os version? when you open ur m2 note bootloader? Thank you
titoerlangga30 said:
using os version? when you open ur m2 note bootloader? Thank you
Click to expand...
Click to collapse
I have tested on Flyme 4.5.3A and Flyme 5.1.4.0A. It worked. And I'm going to write a easier toturial soon, by shell script.
titoerlangga30 said:
using os version? when you open ur m2 note bootloader? Thank you
Click to expand...
Click to collapse
Our bootloader has some problems, so it will always shows it is locked, but in fact it can be uocked by my method, and we are able to flash recovery partition. I ported one but it's buggy, so I won't release it until problem resolved. The screen is upside down but touch is ok. Th only way to fix it is to compile the full image, but my computer's performance is so poor.... Could u help me bro?
Sorry i cant help you.. my pc is not powerfull too and i dont have knowladge about it.. I wish someone can help u better.. and you can release custom rom or custom recovery for our Meizu m2 note.. peacee..
Hello, meanwhile thanks for excellent work, many were expecting this, this point is not clear 3.Flash the temp-unlock-secro.img via Flashtool. in which voice I load this? and also others from flash files,
do you think that will function on G firmware or is it better if he comes back to version A?
Excuse my English I am Italian, and use google translator
Giuppygrass said:
Hello, meanwhile thanks for excellent work, many were expecting this, this point is not clear 3.Flash the temp-unlock-secro.img via Flashtool. in which voice I load this? and also others from flash files,
do you think that will function on G firmware or is it better if he comes back to version A?
Excuse my English I am Italian, and use google translator
Click to expand...
Click to collapse
Please see the full guide I provided in the link
It has showed this.
Giuppygrass said:
Hello, meanwhile thanks for excellent work, many were expecting this, this point is not clear 3.Flash the temp-unlock-secro.img via Flashtool. in which voice I load this? and also others from flash files,
do you think that will function on G firmware or is it better if he comes back to version A?
Excuse my English I am Italian, and use google translator
Click to expand...
Click to collapse
I tested it on 4.5.3A and 5.1.4.0A.
This guide only change the ""secro" partition, "preloader" and "lk"(bootloader). It does not depend on your firmware version. So be relax and try it
Hope your Google translater works well
How about in the guide:
And change the Scatter to this file:
Now choose temp-unlock-secro.img and select it.
but it always fails because it is not a scatter but .img
Giuppygrass said:
How about in the guide:
And change the Scatter to this file:
Now choose temp-unlock-secro.img and select it.
but it always fails because it is not a scatter but .img
Click to expand...
Click to collapse
The scatter file is "MT6753_Android_scatter.txt", not the img maybe i insert a wrong picture there
what about mx4 pro (Exynos 5430 Octa) ?
hello we are new to and TWRP custom rom ??
I have build a TWRP recovery from the newest CM12.1 and TWRP source code.
Here's the link: https://mega.nz/#!ychBnTSb!wL6qicJ2KCpwnhHNImEhhk2OGuEKThxcDk2tj0iGuP0
Problems: Sometimes /cache partition can't be mounted. You can flash preloader, lk and secro partition again to solve this.
And the CPU Temperature clock doesn't work. It always shows 0 Degree...... I'll try to fix it.
Other functions works well Try it!
Before you flash it by Flash tool or fastboot or other tools, remember to remove /system/recovery-from-boot.p
That file will restore the flyme recovery at boot~
I would try but it is not clear how to use flash tool can make images of where to load the various files?
thank you
Giuppygrass said:
I would try but it is not clear how to use flash tool can make images of where to load the various files?
thank you
Click to expand...
Click to collapse
Run Flash Tool.
Load the scatter file first, then click the blank after "recovery", then load the recovery image. Click download then your phone will get TWRP recovery.
Remember to remove /system/recovery-from-boot.p first or your recovery will go back to flyme one
After installing the twrp have you tried to reflash a flyme rom ? Does it works or the official rom have some checks in the zip file to remove ?
Inviato dal mio m2 note utilizzando Tapatalk
twrp Porter-
as we know there is no tool available to port twrp for mt67XX. Phone so here i create a Simple and user friendly tool to Manually Port twrp for the Mediatek MT67XX Phone also Work with MT65XX new 32 bit phone .
The tool is Not based on Source This is a manually Porting Method where we use Stock Recovery to Port a custom Recovery. i have Port twrp for almost all latest MT67XX Chip from source and you can use as a Port Recovery,[Link below]..
What you need
1. tool Download Here https://androidfilehost.com/?fid=962021903579481564
2. Stock recovery [dump using SP tool or using Miracle box] Rename it 'stock.img'
3. Ported twrp from same chip [ Here is My collection- https://www.androidfilehost.com/?w=files&flid=220042] select according your chip if not work try from other phone. rename it 'port.img'
Note- i have Not enable auto copy to keep work with all chip Manually copy Paste Require.
Instructions-
Place port.img and stock.img in tool folder
Run twrp Kitchen.exe and follow on screen instructions
Donation-
You can Donate Me http://paypal.me/droiddeveloper
Faq-
1. Touch Not Work-
it's due to kernel source try to port from other twrp,
final solution use OTG or compile from source.
2. unable to mount partition's-
check and fix fastab in ramdisk folder before hiting enter.
3,. is this Work on old MT65XX Phone-
yes you can use it for MT65XX phone.
4. is This Method work 100% on all Phone-
No it can't work 100% on all phone but work on up to 90% of Mediatek Phone.
5. is this Support Nougat and oreo Images-
yes this one Support oreo and Nougat Recovery Images.
XDA:DevDB Information
twrp porter , Tool/Utility for all devices (see above for details)
Contributors
XN Logos
Version Information
Status: Beta
Current Beta Version: 1.0
Beta Release Date: 2017-09-30
Created 2017-10-01
Last Updated 2018-01-06
@XN Logos
Thanks for the tool.
I cannot download the recovery
MT6757 6.0 MM.rar
MT6757 Nougat helio P25 6GB RAM.zip
MT6797 Helio X27 6.0MM.rar
you can download from androidfilhost.
here is twrp for ulefone t1 ported using this tool base umi plus e. Helio p25, this tool not work on umidigi crystal 4GB/64GB i have tried but not success. https://androidfilehost.com/?fid=673368273298987398
Thank u for your great job, i think the recovery we obtain is called "image-new.img" (and not "recovery-new.img" as it's mentioned in the screen instruction). I successfully get this recovery but don't know how to flash it ( because my phone is locked and not rooted "LENOVO C2- k10a40-" ( MT6735 ). HELP PLZ and thanks again .
walid77dz said:
Thank u for your great job, i think the recovery we obtain is called "image-new.img" (and not "recovery-new.img" as it's mentioned in the screen instruction). I successfully get this recovery but don't know how to flash it ( because my phone is locked and not rooted "LENOVO C2- k10a40-" ( MT6735 ). HELP PLZ and thanks again .
Click to expand...
Click to collapse
You can flash it using SP flash tools, take scatter file from your ROM and then flash with SP tools...
Here is Fastboot Guide, but you can face adbd and large image error with fastboot.
Code:
fastboot oem unlock
fastboot flash recovery recovery-new.img
Please, help me to find usb vcom drivers for my device : LENOVO C2, k10a40, MT6735. Thank u again
walid77dz said:
Please, help me to find usb vcom drivers for my device : LENOVO C2, k10a40, MT6735. Thank u again
Click to expand...
Click to collapse
I beleive that any question not related to TWRP porter is OT here. Check driver v. 5.1632.
mod edit - needrom links removed not allowed due to registration required in order to download
Here is all Flash tools and drivers-
https://androidfilehost.com/?w=files&flid=216849
XN Logos said:
Here is all Flash tools and drivers-
https://androidfilehost.com/?w=files&flid=216849
Click to expand...
Click to collapse
You can get all news about Mediatek driver and tools (like Flashtool) here:
http://www.androidiani.com/forum/mo...l-flash-di-telefoni-con-chipset-mediatek.html
The latest driver (ADB + Preloader) is 5.1632 (the link that I posted), and is good fro XP up to Windows 10 and didn't rqeuire to disable driver sign.
The latest version for Flashtool (for Windows and Linux) is 5.1728
In the link that I posted are available Gogle Platform Tools (adb.exe/fastboot.exe) usefull for flash boot or recovery without using Flashtool.
base added for Helio X23 [Rename rk.bak to recovery.img]
https://androidfilehost.com/?fid=745849072291678959
Hi
great tool for mtk user y have à mt6797M ( elephone s7 4G )
if I understand correctly I need the recovery stock (I have) and a port recovery ( don't have ) but there are none in the link you give., I tried with MT6797 + helio + x25 + 6.0 but I have a MT6797M with android 7, I'm not sure try to flash .
is it possible for you to make a port of the MT6797M Helio X20 M ?
And my fil name: image-new.img not recovery-new.img it's normal ?
Thinking i got same request as Bradco but MT6753M chip Cubot Cheetah 2
I was not able to find the "1st kernel file", guessing it is xx.img-zImage file.
Here my device nougat stock recovery (or at page 4 device review)
With my device at the moment TWRP seems to work only on Marshmallow. It would be nice if someone like to share an updated recovery
BTW
It took me a few retries to check extracting recoveries requiers 3 or 4 times press enter instead of just a singel press any key
@toBsucht Psp @Bradco we have twrp for both Phone 1. Elephone S7 and 2.cubot cheetah 2 no need to Port again. search Forum..
XN Logos said:
@toBsucht Psp @Bradco we have twrp for both Phone 1. Elephone S7 and 2.cubot cheetah 2 no need to Port again. search Forum..
Click to expand...
Click to collapse
yes there is this twrp: TWRP 3.0.3 by Jemmini (I have it) available on needrom and xda
it works with android 6 without problem but not with android 7.
This TWRP 3.0.3 by Jemmini is based on rom: S7_4g_20170110092009_v1.9.zip which is a rom android 6: https://bbs.elephone.hk/thread-12895-1-1.html#.WdiBplu0OM
My rom got this one: s7_4g_20170814163417_v2.4.zip which android 7 v2.4
I tried this :
1. clean install the rom: s7_4g_20170814163417_v2.4.zip
2. start the phone
3. flash the twrp : TWRP_303_Elephone_S7_4g_v1.9
4. reboot the phone but it is blocking on the logo ( I access the recovery but can not start the phone )
5. y tried 2/3 times but once the recovery install it remains on the logo.
after searching I found only this recovery TWRP_303_Elephone_S7_4g_v1.9
I do not know if there is an update because all DROPbox links are down.
@Bradco
Please read carefully the object of this thread. It's only about TWRP porter.
Is not a thread of support for mod recovery about specific devices.
For this please post in the specific thread for the device. Thanks.
@XN Logos
I propose to add this as first object of firs post
- Scope of this thread
Scope of this thread is only to discuss about TWRP porter application.
Please don't discuss about support for recovery for specific devices.
For this please post in the specific thread for the devices.
bovirus said:
@Bradco
Please read carefully the object of this thread. It's only about TWRP porter.
Is not a thread of support for mod recovery about specific devices.
For this please post in the specific thread for the device. Thanks.
@XN Logos
I propose to add this as first object of firs post
- Scope of this thread
Scope of this thread is only to discuss about TWRP porter application.
Please don't discuss about support for recovery for specific devices.
For this please post in the specific thread for the devices.
Click to expand...
Click to collapse
yes sorry,
I explain just my situation, the subject of my post is well on the port of TWRP for processor MT6797M and not on elephone s7. I must speak well of the phone to explain the problem correctly.
Ps : y test this tuto : https://forum.xda-developers.com/showthread.php?p=32965365#post32965365
but y don't find the file BoardConfig.mk
Pretty much same here!
i took a look to default.prop it use a string:
ro.build.version.sdk=24 (stock v14 recovery)
ro.build.version.sdk=23 ( twrp recovery)
even more that needs to be updated in default.prop file from old TWRP to enable it on API24 i.g.
ro.build.fingerprint (seems to be a littel more work)
i stopped repacking TWRP since i note bad image maybe brick my phone.
Also someone told me marshmallow uses ID_creation code = MOB30J; Nougat uses ID_creation code = NHG47N .... idk
funny i removed a additioinal password request. Another user now got additional :highfive: and idk how it occur
Yes Guys, This thread is only for tool Not for Specific Device. So you can ask only for Port base [MT67XX] not for twrp. if you need twrp You can contact Me or create yourself using tool.
XN Logos said:
Yes Guys, This thread is only for tool Not for Specific Device. So you can ask only for Port base [MT67XX] not for twrp. if you need twrp You can contact Me or create yourself using tool.
Click to expand...
Click to collapse
ok I understand, I want to try to do it myself, can you make a port of MTK 6797M ?
( this is what I needed at the start, I came on this thread to do the twrp myself.
thank you in advance
As already written it is not that easy to use if some errors occur. Also i did not 100% on it which files i have to remove if tool say "delete following":
1. kernel (is it x.img-zImage?)
2. kernel offset (i guess i found)
and that flase "press ANY key" message! Just as a little sidenote for your update.
Hi there, good to see you.
After struggling to find any helpful information about rooting ZTE Blade A2 plus, I finally was able to root>soft brick>hard brick>stock flash>repeat this beautiful device. So thought to share it here so that it becomes helpful for someone in need.
Device Information: https://forum.xda-developers.com/ge...te-blade-a2-plus-5-5-fhd-mt6750t-3gb-t3480759
Prerequisite: Winrar Latest version, VCOM and device drivers (MT67xx), General intelligence to download the attachments and to arrange everything in order and you're good to go
Step 1: Install custom recovery (We'll install TWRP)
a} Download recovery and preloader
b} Download Scatter file
c} Download SP Flash tools
d} Only tick recovery and preloader and select the downloaded files and flash it
e} When the process finishes and SP flash tools displays done, remove the phone and press "Vol Up+Power" to boot into recovery. It may ask you to make /system writable if you want swipe as indicated
f} Done enjoy
Note: Take this opportuniy to first of all backup your stock rom using TWRP and save it elsewhere.
Step 2: Rooting (With Magisk Or Super SU)
a} Download Magisk or Super SU flashable zip as per your need
Note: Magisk gives most of the Super SU features and doesn't trips google security net so you are able to use banking apps while rooted with magisk
b} Place downloaded zip in your sd card
c} Boot into TWRP recovery and flash the said zip
d} Done enjoy
Step 3: Flashing stock rom (Only russian version as of now)-Language is english bloatwares are Russian
a} Download Stock Rom from https://yadi.sk/d/RZLBrKKv3LxejN
Note: It contains PC Flashable stock rom along with scatter files and NVRAM backups so it'll help if you lose IMEI during the process, it is advisable to keep this offline as backup in case links stops working.
b} Flash the downloaded stock rom with SP flash tools
Note: This stock rom doesn't support VOLTE so i advice you to first take a full backup of your initial rom after installing TWRP, also please share that backup here as well so as i could add it to this thread to make it helpful for someone who has already lost VOLTE inclusing me
Conclusion: I'll be very happy if this information proves useful to you in any manner and also request you to must share your backup for me to get VOLTE back.
Thank You
MIUI 9 For A610 Plus
Preview:
Many many thanks Alfonso for making this vary valuable post . I think A2 Plus and A610 Plus are almost same , so kindly check this ROM me and may solve your volte problem
ww.getdroidtips.com/miui-9-zte-blade-a610-plus/[/url]
Rajevpmavoor said:
Preview:
Many many thanks Alfonso for making this vary valuable post . I think A2 Plus and A610 Plus are almost same , so kindly check this ROM me and may solve your volte problem
ww.getdroidtips.com/miui-9-zte-blade-a610-plus/[/url]
Click to expand...
Click to collapse
Although the rom is bugless but, unfortunately VOLTE didn't work.
MIUI 9 For A610 Plus
Did you flash this new MIUI 9 ROM , I think it has volte and it is in Android M.
Alfonso Osnofla said:
Although the rom is bugless but, unfortunately VOLTE didn't work.
Click to expand...
Click to collapse
does it boot into meta mode on pressing volume down+power button??( bcoz my fone boots into meta mode on doing so)
and how to go into bootloader?
while using sp flash tool i power off the fone and then connect it to sp flash tool via usb cable ...fone gets detected and but download for twrp doesnt occur ..it says PMT changed for the rom, select format all+ download ....
but i didnt do format all coz i dont have flashable stock rom...
I lost my IMEI after flash ROM, not able to retrieve IMEI
Issue in camera & Finger Lock
Alfonso Osnofla said:
Although the rom is bugless but, unfortunately VOLTE didn't work.
Click to expand...
Click to collapse
I have checked both ROM, Miui ROM camera is look like .02MB, No VOLTE, Finger Print lock is not working
Thanks. I have messed up anyway...
Anybody have a complete Readback (Using SP-Flash Tools) copy of (volte) rom?
I lost Imei, From the given NVram.bin, Could not edit Imei using BPGL.... pull as Maui Meta and SN writer can not do this with present update.
I need to revert back. please help with ROM copy and NVRAM Edit.
Alfonso Osnofla said:
Hi there, good to see you.
After struggling to find any helpful information about rooting ZTE Blade A2 plus, I finally was able to root>soft brick>hard brick>stock flash>repeat this beautiful device. So thought to share it here so that it becomes helpful for someone in need.
Device Information: https://forum.xda-developers.com/ge...te-blade-a2-plus-5-5-fhd-mt6750t-3gb-t3480759
Prerequisite: Winrar Latest version, VCOM and device drivers (MT67xx), General intelligence to download the attachments and to arrange everything in order and you're good to go
Step 1: Install custom recovery (We'll install TWRP)
a} Download recovery and preloader
b} Download Scatter file
c} Download SP Flash tools
d} Only tick recovery and preloader and select the downloaded files and flash it
e} When the process finishes and SP flash tools displays done, remove the phone and press "Vol Up+Power" to boot into recovery. It may ask you to make /system writable if you want swipe as indicated
f} Done enjoy
Note: Take this opportuniy to first of all backup your stock rom using TWRP and save it elsewhere.
Step 2: Rooting (With Magisk Or Super SU)
a} Download Magisk or Super SU flashable zip as per your need
Note: Magisk gives most of the Super SU features and doesn't trips google security net so you are able to use banking apps while rooted with magisk
b} Place downloaded zip in your sd card
c} Boot into TWRP recovery and flash the said zip
d} Done enjoy
Step 3: Flashing stock rom (Only russian version as of now)-Language is english bloatwares are Russian
a} Download Stock Rom from https://yadi.sk/d/RZLBrKKv3LxejN
Note: It contains PC Flashable stock rom along with scatter files and NVRAM backups so it'll help if you lose IMEI during the process, it is advisable to keep this offline as backup in case links stops working.
b} Flash the downloaded stock rom with SP flash tools
Note: This stock rom doesn't support VOLTE so i advice you to first take a full backup of your initial rom after installing TWRP, also please share that backup here as well so as i could add it to this thread to make it helpful for someone who has already lost VOLTE inclusing me
Conclusion: I'll be very happy if this information proves useful to you in any manner and also request you to must share your backup for me to get VOLTE back.
Thank You
Click to expand...
Click to collapse
Just try http://www.ztedevice.com/support/detail?id=FE22BEF5C33D4A17BCDA20AAE2631951 ( http://download.ztedevice.com/support/product/569/201802111051594/sd/20180211105554767.zip )
sd card update using twrp.
But first remove the first line from update script file located inside the zip.
Just reply.
Need MIUI rom
Heyy plz gime me teh rom for zte blade A2 plus i really need a miui rom for zte blade A2 plus...
Help I'm confused.
Reading the comments i got to know that many people lost their IMEI and VOLTE , I want to root the device So can anyone tell me when does this problem occur (loosing volte and imei) during rooting or while flashing a custom rom?
kingksath said:
I lost my IMEI after flash ROM, not able to retrieve IMEI
Click to expand...
Click to collapse
Did you loose your IMEI on rooting or while flashing any custom Rom?
http://www.mediafire.com/file/6768c1x7dqyd818/update.zip
version 4 sd card update
vasilemk said:
http://www.mediafire.com/file/6768c1x7dqyd818/update.zip
version 4 sd card update
Click to expand...
Click to collapse
What is it for?
Is it for volte?
vasilemk said:
http://www.mediafire.com/file/6768c1x7dqyd818/update.zip
version 4 sd card update
Click to expand...
Click to collapse
Is this an update to the Stock Rom?
hi, can u help me please, iam tryin to update with twrp , i did remove first line from script but i have error.
Found a way to unlock bands on MTK based phones by flashing basebands from phones with the same chipset. Doing this by using SPFLASH and flashing md1 files. Still unable to connect to cell network on my Doogee bl12000. Flashed this phones MD1, was wondering if anybody could provide me with the nvdata and nvram from the ZTE blase a2 plus. Hoping by flashing those files can connect to a U.S. network.
Hi All!
After few tries i successfully rooted Lemfo LEM4 Pro full Android Smartwatch. In attachment prepatched boot.img (with Magisk) and scatter file you need. You can flash it through SP Flash Tool, MTK Droid Tool or Miracle Box. I used the last one (Version 2.82).
You can easily find it googling (not much).
I also tried (unsuccessfully) to flash TWRP. Not much time lost about it!
I remember that watch is MTK6580 based and it is 5.1 based.
Happy rooting.
P.S. Feel free to install Magisk after this, and to thank me
Never tried on DM99, but it has exactly the same OS.
Lemfo LEM4 Pro Pack
Code:
https://drive.google.com/open?id=1l3mj1MNda7lp9UJg1gMbPalaoBHn3krg
Could I have instructions to root, please? Thank you
I do not see no file called boot.img but i see only a file called boot.bin
+1 on some instructions, I don't want to mess up the process...
Please explain in detail step by step
GMOne said:
Hi All!
After few tries i successfully rooted Lemfo LEM4 Pro full Android Smartwatch. In attachment prepatched boot.img (with Magisk) and scatter file you need. You can flash it through SP Flash Tool, MTK Droid Tool or Miracle Box. I used the last one (Version 2.82).
You can easily find it googling (not much).
I also tried (unsuccessfully) to flash TWRP. Not much time lost about it!
I remember that watch is MTK6580 based and it is 5.1 based.
Happy rooting.
P.S. Feel free to install Magisk after this, and to thank me
Never tried on DM99, but it has exactly the same OS.
Lemfo LEM4 Pro Pack
Code:
https://drive.google.com/open?id=1l3mj1MNda7lp9UJg1gMbPalaoBHn3krg
Click to expand...
Click to collapse
Please explain in detail step by step how to root ? Thanks
Apoorv Saxena said:
Hi All!
After few tries i successfully rooted Lemfo LEM4 Pro full Android Smartwatch. In attachment prepatched boot.img (with Magisk) and scatter file you need. You can flash it through SP Flash Tool, MTK Droid Tool or Miracle Box. I used the last one (Version 2.82).
You can easily find it googling (not much).
I also tried (unsuccessfully) to flash TWRP. Not much time lost about it!
I remember that watch is MTK6580 based and it is 5.1 based.
Happy rooting.
P.S. Feel free to install Magisk after this, and to thank me
Never tried on DM99, but it has exactly the same OS.
Lemfo LEM4 Pro Pack
Please explain in detail step by step how to root ? Thanks
Click to expand...
Click to collapse
Nice, thanks. Sadly although the links are not working....
Auto Boot
How can you even run the patched boot.img in SP Flash Tools - my device auto-boots whenever the USB is attached.
SPFT's needs your device off to run it so couldn't even get to that step. Any ideas?
OO7R3N7 said:
How can you even run the patched boot.img in SP Flash Tools - my device auto-boots whenever the USB is attached.
SPFT's needs your device off to run it so couldn't even get to that step. Any ideas?
Click to expand...
Click to collapse
Press download before you connect the watch
Noidremained said:
Press download before you connect the watch
Click to expand...
Click to collapse
True that - despite the autoboot, if you press download and then connect it, it will run through it before it tries to auto-boot. You may get brom error but it will still go through.
Here is a step by step guid for how to root Lemfo Lem4 Pro for the sake of hacking.
1 - Download the ROM file from https://drive.google.com/file/d/1-2z9RB3kb71ZWu85ST0_clsa7MjzMSJY/view
2- Download the magisk patched boot.img from https://drive.google.com/open?id=1hJSUT9JYfpC-NqCiKYzLMidmStxxz9bD
3- Replace the downloaded boot.img with the boot.img present at the ROM file.
4- Shut the watch off
5- Open SPFLASH tool, select the required .bin file and scatter.txt file.
6- Hit download(watch USB is disconnected at this stage)
7- Plug the USB cable of the watch
8- Wait for the flash to finish.
10- Once the watch is booted. Install the magisk manager, it will reboot and you are good to go
Palyancodr said:
Here is a step by step guid for how to root Lemfo Lem4 Pro for the sake of hacking.
1 - Download the ROM file from https://drive.google.com/file/d/1-2z9RB3kb71ZWu85ST0_clsa7MjzMSJY/view
2- Download the magisk patched boot.img from https://drive.google.com/open?id=1hJSUT9JYfpC-NqCiKYzLMidmStxxz9bD
3- Replace the downloaded boot.img with the boot.img present at the ROM file.
4- Shut the watch off
5- Open SPFLASH tool, select the required .bin file and scatter.txt file.
6- Hit download(watch USB is disconnected at this stage)
7- Plug the USB cable of the watch
8- Wait for the flash to finish.
10- Once the watch is booted. Install the magisk manager, it will reboot and you are good to go
Click to expand...
Click to collapse
Hi
do you know if this needs a certain version of the rom or will it work on any
My firmware version is V1.4_20181117
so just wondered if you did it on this version or an earlier one ?
thanks
Can someone answer a question for me, which bin file needs selecting for downloads? any of the 3 available within the ROM file all give errors "LIB DA not match, please re-select".
you're not supposed to change the Download-Agent, change it back to MTK_AllInOne_DA.bin and it should be fine
So, I've switched the bin back to MTK_AllInOne_DA.bin. Selected MT6580_Android_scatter.txt. Clicked download and nothing happens.
I've tried the above with the watch connected and without. I feel like something should happen in SPFLASH that isn't. Should the dropdown in SPFLASH be set to download only, Firmware Upgrade or Format All + Download?
the dropdown should be set to firmware upgrade or alternatively to download only. You should press download and then connect the watch to the computer while it is off. If it doesn't work it could be problems with the cable or with the drivers
Sorry to keep replying, this is really problematic. So, keeping my watch unplugged at this point.
I kept MTK_AllInOne_DA.bin for the download agent but got a "rom[boot] checksum mismatch" when selecting the skatter.txt file.
I read that moving the checksum.ini file to another location fixes that, which it did. But when I click download nothing happens. I think I'm supposed to see the download finish right? nothing seems to happen.
I don't have the watch connected at this point, I should connect the watch via usb after the download is successful?
EDIT: right I think I'm a step closer, I needed to install the MediaTek USB driver Download Lemfo Lem4 Pro USB Driver (official) (gsmmobiledriver.com) this time after I connected the powered off watch it downloaded successfully and flashed the package.
EDIT2: The additional step needed is to install Magisk Manager and to make sure the latest version is installed. Finally I'm rooted. Phew.
did you install magisk manager as it says in point 10?
Noidremained said:
did you install magisk manager as it says in point 10?
Click to expand...
Click to collapse
I did and it worked, but there were several reboots required before Magisk sucessfully rooted my device. Also, when adding a magisk addon module the watch got caught in a bootloop which resulted in me needing to re-flash stock and starting again. It's a fussy device and a real shame there is no way to update android to something other than 5.1. 6 is where the permission management were added which is a big deal as far as security considering the watch origin.
Please Help me,
I am using Corvus OS v7.0.
I have twrp-3.4.0-0 install.
I tried:-
1. Flashing official OZIP file form TWRP
ERROR :- Unable to find ozip decrypt
2. Tried Flashing Stock Recovery, Stock Recovery is been flashed by following R2X2 Youtube Video. BUT, While selecting OZIP package in Stock Recovery .
ERROR:- Installation Failed
3. Downloaded Stock Farmware form (firmwarefile.com)
TOOL Which is provide is MSM Tool Which Required Username & Password, Also tried for cracking the MSM Tool by seeing Youtube video (NOT WORKED ANY VIDEO OF CRACKING MSM TOOL)
I want to go back to stock Rom of New Realme UI.
I tried all of this but can't able to go back kindly help me if any one has done on there Device.
try ozipdecrypt tool on computer.... see guides section