I have a Claro D801/803 which has been through hell and back with a QHUSB 9008 error -> 9006 error (without the right IMG files) and now finally I have achieved download mode.
Now if any of you gents can tell me how to go from here to Cloudy or CM (as in - which files to use), it will be much appreciated. I'm really really scared of flashing the wrong thing again. The Claro phone is extremely fragile...
Also two worrisome questions :
1. will this phone be carrier locked the moment I flash the kdz ?
2. Is this - http://forum.xda-developers.com/showthread.php?t=2432476 - the way to flash. In which case, should I choose CDMA in the flash tool as well as "Korean" as language. The instructions on that page are not entirely clear.
For the benefit of those who may have the same question about the Claro 801/803, here are the steps to follow. First - save a nandroid backup and also backup your photos, music,etc. Also check if you are starting from Jellybean or Kitkat.
1. Install Towelroot and just click the button to root. Reboot (even though it says you dont need to)
2. Download TWRP 2.8 from here. Unzip the zip file to get an IMG file. Put this on your phone.
3. Install "Flashify" from play store. Click the button that says "Install Recovery", then select "From file" and point it to the IMG file you put on your phone in step 2.
4. Reboot.
5. Check if recovery is working - the way to do it is simple. Power off your phone -> press "Vol-Down + Power button" until it shows a screen saying "Press power button for factory reset". At this point press power button THREE times. If you have the recovery installed, it will boot to TWRP recovery... otherwise your phone will factory reset and you will lose your pictures (so make sure your phone is backed up).
At this point you are ready to install ROMS !!
There are two main ROMs for the LG G2 right now - the Cyanogenmod 12 Lollipop and the Cloudy G3. The CM12 ROM can work on Jellybean baseband/radio while the Cloud ROMs need Kitkat Basebands/Radio. Now, at this point I decided to not flash Kitkat based basebands because ... well, I might as well wait for Lollipop to flash the updated baseband.
so I decided to go with CM12 - and flashed the CM12 ROM and gapps.
Hi guys,
I have TWRP recovery installed and Exodus.
Is there a way I can fully restore my OP2 back to stock.
IE, stock recovery and stock OS?
Can I also unroot and lock the device so it looks like nothing ever happened?
Lets say I need to return my OP2 for maintenance.
Thanks in advance.
Also I see OxygenOS 2.1.1 released recently, is there a full OS download?
SavellM said:
Hi guys,
I have TWRP recovery installed and Exodus.
Is there a way I can fully restore my OP2 back to stock.
IE, stock recovery and stock OS?
Can I also unroot and lock the device so it looks like nothing ever happened?
Lets say I need to return my OP2 for maintenance.
Thanks in advance.
Also I see OxygenOS 2.1.1 released recently, is there a full OS download?
Click to expand...
Click to collapse
Its simple !!
download the official signed rom.zip from oneplus two forum !!
place it into ur root folder
wipe data, format it
now flash the stock rom
restart ur phone !
when the phone start up, go to developer option > usb debug !
now download the stock recovery and put it in adb folder in ur pc.
type the command
fastboot flash recovery recovery.img
(recovery.img is the recovery image which u downloaded from onplus two forum. u can rename it and place it in adb folder)
after that type command
fastboot oem lock
press enter.
reboot ! violaa !!
u now have stock recover + stock rom = new device !!
enjoy
hope i have helped u !!:good:
If you are returning it for maintenance Oneplus allows rooted and modded devices to still be under warranty as long as it is not the modding that caused the problem.
Hi all again. Today i write guide for noob
How Flash Stock rom???
1. First download rom to your pc
2. When you download rom open in winrar and check pack
3. If you have only one file update.app you can extrack but first you must create in desktop folder named dload and extract there.
4. If you have root and want flash full rom you can do it but you must have stock recovery.
5. Copy dload to your extsdcard and go to dialpad and write *#*#2846579#*#* and choise 4 and 1.
6. Your phone now power off and flash new firmware.
7. When its finish your phone boot again with new firmware.
P.s Flash firmware for your region or you be have bootloop or software brick and if you have you must have unlocked bootloader to reanimate your mate7
How Flash Ota update???
1. Download Ota update to your pc
2. Open using winrar and check do you have all folder and file look for exsample
cust
META-INF
patch
system
update.app
3. If you have that same folder do not extract from update.zip
4. Create dload on desktop and copy there update.zip and now copy to your extsdcard and go to dialpad and write *#*#2846579#*#* and choise 4 and 1.
5. Your phone now power off and flash new firmware.
6. When its finish your phone boot again with new firmware.
How restore twrp backup ???
1. If you have lollipop you must use pc to create folders:
TWRP/BACKUPS/ here you must put downloaded backup
2. If you have marshmallow you must use pc to create folders:
TWRP/BACKUPS/YOUR SERIAL NUMBER/ and here you must put downloaded backup
3. Download backup for your mate7 and extraxt to desktop
4. Copy all file to create folder and now copy TWRP folder to your internal sdcard or ext sdcard.
5. Power off your phone and go to TWRP RECOVERY
6. Select storege where you copy backup and now go restore.
7. If you see backup you can now restore.
8. Whene its restore go back and do it wipe data/cache/dalvick cache and reboot
9. First boot can make very long time and wait when in boot to system.
P.s When you use TWRP 2.8.7.X and do ot wipe data you lose your file and vendor country but when you use TWRP 3.0.2.0 you don't lose. If you lose you must restore using tool from this topic but you must be root
http://forum.xda-developers.com/mate-7/development/tool-srk-tool-huawei-beta-02-20160501-t3369990
How to reanimater your mate after bootloap???
We have 2 methode for now.
Firts it's restore twrp backup and secend its fastboot and downgrade pack
If you use twrp backup and its work very good for you but if dont work you must use fastboot method
1. Power off device and go to fastboot
2. Extract file from update.app for lollipop :
- system
- cust
- boot
- recovery
- userdata
for Marshmallow extract :
- system
- cust
- boot
- recovery
3. Install adb drive from this topic
http://forum.xda-developers.com/showthread.php?p=48915118
and copy all file to C:/adb on your windows
4. Open CMD as administator and write this commads
cd C:/adb
adb fastboot
Now you on fastboot mode
When you extract file frome update.app you must rename file :
10.boot.img to boot.img
11.recovery.img to recovery.img
13.cust.img to cust.img
14.system.img to system.img
If you remane you can flash img file using fastboot methode using cmd
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash cust cust.img
fastboot flash system system.img
It's take very long but wait. When its finish take micro sd adapter and put you micro sdcard and connect to pc and copy full rom :
If you use lp file because you have bootloop on lp you must flash that same rom what you flash file using fastboot
and do it that same for marshmallow
when you copy put your adapter to slot of microsdcard in your mate7
Now power of your phone and try go to flash method using 3 bottom on you mate7
VOL+ POWER + VOL- when you seescreen on realese power and wait. Now you see how rom its flash.
If you have error you must use downgrade pack from mm to lp and flash.
When its flash you must flash lp.
If you have error you must use downgrde pack from lp to kk and flash.
When its finish you must flash kk rom.
Now you back to rom after bootloop and you can try again flash rom what you want.
Finish guide for noob
Cheers :highfive:
Thanks for the guide. I want to restore to MM from kk using twrp? Is it possible? I only wait 5 minutes after restore reboot then I think something must be wrong so I restore my own backup. I will give a try again.
Sent from my HUAWEI MT7-L09 using XDA-Developers mobile app
No you can't do it you must first flash kk second lp and then you flash mm
Wysłane z mojego HUAWEI MT7-L09 przy użyciu Tapatalka
chudy_85 said:
How restore twrp backup ???
1. If you have lollipop you must use pc to create folders:
TWRP/BACKUPS/ here you must put downloaded backup
2. If you have marshmallow you must use pc to create folders:
TWRP/BACKUPS/YOUR SERIAL NUMBER/ and here you must put downloaded backup
3. Download backup for your mate7 and extraxt to desktop
4. Copy all file to create folder and now copy TWRP folder to your internal sdcard or ext sdcard.
5. Power off your phone and go to TWRP RECOVERY
6. Select storege where you copy backup and now go restore.
7. If you see backup you can now restore.
8. Whene its restore go back and do it wipe data/cache/dalvick cache and reboot
9. First boot can make very long time and wait when in boot to system.
P.s When you use TWRP 2.8.7.X and do ot wipe data you lose your file and vendor country but when you use TWRP 3.0.2.0 you don't lose. If you lose you must restore using tool from this topic but you must be root
http://forum.xda-developers.com/mate-7/development/tool-srk-tool-huawei-beta-02-20160501-t3369990
Click to expand...
Click to collapse
Hi buddy, your guide is gold. I explain what i did up to now. I wanna know how to proceed safely.
1) 2 year old MT7-L09 Mate 7. Long time ago i go bootloader unlocked, rooted and updated to lollipop stock. dont know which firmware version.
2) TWRP 2.8.7.0. Wanted to factory reset after long time no using the phone, ended up wiping OS and god knows what else.
3) Can access fastboot and TWRP.
4) Tried stock recovery and 3 button method to downgrade or install stock update.app. Nothing worked it always got stuck at 90%.
Up to there nothing worked. I guess i must have damaged some critical files.
Then i found your guide and wanted to try making a lollipop restore from TWRP. Found a file.
Now, if i understood what you have written in red, i may have wiped oem information like country and vendor. Maybe thats because i cant install stock from huawei.
How can i restore that info? is there any way i can backup my bootloader info, or retrive my country and vendor info?
How do you suggest me to proceed safely.
Thanks
Sebastian
lungolok said:
Hi buddy, your guide is gold. I explain what i did up to now. I wanna know how to proceed safely.
1) 2 year old MT7-L09 Mate 7. Long time ago i go bootloader unlocked, rooted and updated to lollipop stock. dont know which firmware version.
2) TWRP 2.8.7.0. Wanted to factory reset after long time no using the phone, ended up wiping OS and god knows what else.
3) Can access fastboot and TWRP.
4) Tried stock recovery and 3 button method to downgrade or install stock update.app. Nothing worked it always got stuck at 90%.
Up to there nothing worked. I guess i must have damaged some critical files.
Then i found your guide and wanted to try making a lollipop restore from TWRP. Found a file.
Now, if i understood what you have written in red, i may have wiped oem information like country and vendor. Maybe thats because i cant install stock from huawei.
How can i restore that info? is there any way i can backup my bootloader info, or retrive my country and vendor info?
How do you suggest me to proceed safely.
Thanks
Sebastian
Click to expand...
Click to collapse
You can manual push oem info to correct partition. What country you from
chudy_85 said:
You can manual push oem info to correct partition. What country you from
Click to expand...
Click to collapse
Im form Argentina. Phone was bought in US. I dont mind putting any country version as long as i can bring it back alive.
Luckily i have saved phone imei, serial number and id in evernote. Maybe that can help to figure it out.
Do you have a procedure or guide to do that you are suggesting?
if you have unlocked bootloader you can try use SRKToolHuawei-Lod-Chong-V2.0-20161002 to change oem info and then try flash correct your rom using dload method. But if you change region you must unlock again bootloader but when you go to fastboot you have unlocked. Unlock again because its locked
Hey guys,
I installed MIUI 8.2.5.0. But I want to roll back to 8.1.. How likely am I to brick my phone without performing all data wipe? My BL is locked and since the PC suite is not working I can't get to recovery without unlocking the device and I don't want to do that.
Use Mi flash tool. Download the fastboot ROM of your device and the version you want to roll back. Install all the device drivers. In flash tool, select all except storage of the tool detects your device, flash it.
So flashing it from Updater in settings using a zip file is not a good idea?
Thanks for your help anyway.
1. Backup your data
2. Download the miui 8.1.1.0 from here - http://bigota.d.miui.com/V8.1.1.0.MALMIDI/miui_HM3SGlobal_V8.1.1.0.MALMIDI_874f56cdc1_6.0.zip
3. Flash it via updater app.
4. Factory reset your phone.
5. Enjoy
I used the same method and I'm very happy with miui 8.1.1.0
Thanks, that's all I wanted to hear. Running 8.1. again and it didn't even brick my phone ?
impulsar said:
2. Download the miui 8.1.1.0 from here - http://bigota.d.miui.com/V8.1.1.0.MALMIDI/miui_HM3SGlobal_V8.1.1.0.MALMIDI_874f56cdc1_6.0.zip
3. Flash it via updater app.
Click to expand...
Click to collapse
Can you please help me?
1) What do you mean by "Flash it via updater app"?
[When I try the "Updater" App, in the menu I choose "Choose updater package", choose the ROM from your link, click "OK" then I get "Can't verify update - Sorry, flash older version is not allowed" after maybe a minute]
2) do you have a link for the last ROM before 8.5.3.0?
Best Regards
Here is indonesian forum. But you can download older rom from it. Scroll until you see this section
..
https://m.kaskus.co.id/thread/57dd0...be-cool/?ref=amp.kaskus.co.id&med=btn-lengkap
Just use the fastboot ROM and flash it via Mi Flash Tool
The final steps to Remove "Vendor ROM" that does not have the Update Option in Settings Or Unbrick Le Max 2 or simply Update Le Max 2 to latest EUI.
NOTE: This method should address the following weird problems:
1. Le Max 2 TWRP Seeing 0MB in Internal Storage. Unable to access the ROM Storage
2. Encrypt Option Greyed Out In Settings-->Fingerprint and Security
2. Update Option missing in Settings.
3. Fingerprint Sensor not working... If it still gives trouble... Calibrate the FP Sensor in its settings. Or register the same fingerprint multiple times.
This method should work on ALL versions of Le Max 2 including X820 X829 X821
Before starting... Remove ALL USB peripherals that might interfere with the process. Use USB Ports on the PC/Laptop... DO NOT use USB Hubs... Even if the phone appears dead... Connect it Power Outlet and let it charge for an hour.
1. Download the latest Stable EUI... from LeEco Website Directly .
2. Download the FlashOne v1.9 And Service ROM From HERE.
UPDATE: FlashOne v2.0 has been released! Here's the LINK.. It is a bit more advanced and offers the ability to format User Data for a Cleaner Flash
3. Download Qualcomm Drivers
4. Put Le Max 2 in EDL (Emergency Download Mode) by pressing Volume +, Volume - and Power Button Simultaneously. For those having difficulty..... Here are few tips.
Connect the Phone to PC. If the phone is Switched/Powered On... Then Power Off the phone and Switch Back On with the Key Combinations.
OR
If the Phone is Switched Off... Then Use the Key Combination to put the phone in EDL Mode..
In either case..... the PC will make a sound of Disconnection and Reconnection of an USB peripheral. AND you will see Qualcomm QDLoader 9008 Driver Installation. To verify the same... go to Device Manager in Win 7 / Win 10 and Under Ports (Com & LPT)... you should see Qualcomm HS-USB QDLoader 9008 (COMXX).. The XX corresponds to a particular COM Port. Remember this port.
5. Once the Le Max 2 is in Qualcomm QDLoader 9008 EDL Mode... Start the FlashOne Software.
6. Choose “Qualcomm – flash dead phone” from the drop down menu next to “Flash type”.
7. Click “Refresh button” next to “Select Device”. Here your Le Max 2 will show up but in COM Number (ComXX)
8. Browse for our Qfil/service ROM by clicking “Select File”.... You can technically select the Latest EUI ROM... But it is safer with Service ROM. DO NOT Unzip the ROM File.
9. After everything is set up under “Settings”, Press “Flash” button.
10. Installation can take anywhere between 10 to 20 minutes. Have Patience.
There are chances that the Flashing might fail. In case it does... Simply put the phone in EDL Mode again... and restart the procedure.
11. After the FlashOne confirms successful flash... Wait for 15 - 20 seconds. Then Power On the phone by pressing the Power Button for at least 60 seconds. Do Not Panic due to the long press.. Press it until the phone vibrates.
12. The Le Max 2 should be in Developer Version of EUI with an unlocked Bootloader and STOCK recovery.
13. The Developer ROM has the “Format Virtual SD card” setting in Settings Menu--> Backup/Reset--> Factory Reset.. Use the setting to get back the 50+GB
[You can also use the option Format Data in TWRP Recovery instead and the partition will 64GB correctly instead of 10 GB initially. Read ahead for the procedure]
14. Once you have a working Le Max 2... there are two directions:
Install Latest Stable EUI ROM... with Update Option
OR Install TWRP Recovery / ROOT / Custom ROM
15. a. For those who wish to install Stock ROM... Simply rename it to "update" (DO NOT Add .zip... Else the file will look like update.zip.zip) and place the update.zip file in ROOT of the phone. Thereafter Switch Off the Phone... Enter Recovery by pressing Volume + and Power Button... Choose Update System AND the other setting to Clear All Data. Your Le Max 2 should update without any error.
15. b. For those who want TWRP and ROOT:
* Download the latest TWRP (For Le Max 2) and SuperSU from their respective websites. Download and Install ADB and Fastboot From HERE.
* Copy the SuperSU Zip File to the ROOT of the Phone.
* Unzip and Rename the TWRP recovery to Recovery (The file should be Recovery.img.... NOT Recovery.img.img)
* Put the Le Max 2 into Fastboot Mode By Pressing Volume - and Power Button
* Go to the ADB Install Folder and Press Shift & Right Click to get & select “Open command window here“. Confirm Fastboot is working by Entering Command: Fastboot Devices.. You should see a random string of letters followed by the word Fastboot. If you do not see the same..... the installation didn't complete successfully.
* In the Command Window.. Type: fastboot flash recovery recovery.img
* Enter the following Command: fastboot boot recovery.img
* Once the Phone has entered the Recovery... Flash the SuperSU Zip file and you will have ROOT capabilities.
* Take FULL Backup of your device and then install ANY Custom ROM.
Do let me know your results.
[Update]: There's a simple method you could try to get the Update Option Back in Le Max 2 Phone that arrived with Vendor ROM... Using the default File Manager Tap on the Update.zip file and select Upgrade Option. This will force the phone to Update using the ROM file. This method is for people who could not update through the Stock Recovery and received Errors.
After QFil/flashone my lemax2 still bootloops. I've tried flashing other roms via recovery but it reboots mid installation.
Any advice?
Try Another QFil / Service ROM
Yisheng said:
After QFil/flashone my lemax2 still bootloops. I've tried flashing other roms via recovery but it reboots mid installation.
Any advice?
Click to expand...
Click to collapse
My advice is try another Qfil. These files are quite large and hence the one you downloaded might have some corruption.
Try THIS File
Hi, the link to the Leeco website is down...is there any alternative for downloading the latest stable EUI?
I downloaded the 23s from another website, renamed "update" but when I try to update via recovery it fails, cause: corrupted.
Any suggestion on this?
Thanks a lot in advance
ermonnezza said:
Hi, the link to the Leeco website is down...is there any alternative for downloading the latest stable EUI?
I downloaded the 23s from another website, renamed "update" but when I try to update via recovery it fails, cause: corrupted.
Any suggestion on this?
Thanks a lot in advance
Click to expand...
Click to collapse
You may try to use twrp to flash it, you downloaded version is a twrp backup version...
Thanks for the suggestion but I'm trying to get back to stock for other phone issues... So I wanted to avoid to install twrp, if possible.
Any link to a stock rom that can be updated via stock recovery?
You know I just going to blame Android 7.0 Nougat any chance we can have a CyanogenMod 13 6.01 based foxfi friendly ROM ?
ermonnezza said:
Thanks for the suggestion but I'm trying to get back to stock for other phone issues... So I wanted to avoid to install twrp, if possible.
Any link to a stock rom that can be updated via stock recovery?
Click to expand...
Click to collapse
I used the 23s from this link: https://bbs.le.com/zt/eui/le_max2.html
I flashed it from an indian rom. It will change your bootloader to chinese, though (not really an issue). And your recovery too, I guess (don't panic, it's bilingual). It will also update /firmware, and that should help with many issues.
However, there's no need to flash TWRP in order to use it: you can just boot it ( fastboot boot TWRPname.img).
At the last step, my indian rom is not getting flashed. Saying corrupted!!. Yesterday I updated with the same (rom) file from the system updater when I did not root the device.
"[Update]: There's a simple method you could try to get the Update Option Back in Le Max 2 Phone that arrived with Vendor ROM... Using the default File Manager Tap on the Update.zip file and select Upgrade Option. This will force the phone to Update using the ROM file. This method is for people who could not update through the Stock Recovery and received Errors."
Following these steps got the same error.
Edit: I am pretty much sure the developer chinese rom has the issue. It does not let you update with the Indian rom. Pretty bad.
Did anyone succeed to flash the indian rom the phone came with, or any indian rom from these chinese developer rom?
---------- Post added at 03:52 AM ---------- Previous post was at 03:15 AM ----------
BTW, the indian latest stock rom 5.8.019s can not be download from anywhere now. Can you give me a link that works now?
deltasata said:
At the last step, my indian rom is not getting flashed. Saying corrupted!!. Yesterday I updated with the same (rom) file from the system updater when I did not root the device.
"[Update]: There's a simple method you could try to get the Update Option Back in Le Max 2 Phone that arrived with Vendor ROM... Using the default File Manager Tap on the Update.zip file and select Upgrade Option. This will force the phone to Update using the ROM file. This method is for people who could not update through the Stock Recovery and received Errors."
Following these steps got the same error.
Edit: I am pretty much sure the developer chinese rom has the issue. It does not let you update with the Indian rom. Pretty bad.
Did anyone succeed to flash the indian rom the phone came with, or any indian rom from these chinese developer rom?
---------- Post added at 03:52 AM ---------- Previous post was at 03:15 AM ----------
BTW, the indian latest stock rom 5.8.019s can not be download from anywhere now. Can you give me a link that works now?
Click to expand...
Click to collapse
It is the link of stock Indian eui 5.8.019s
https://drive.google.com/file/d/0BymbvUDXUaNlTjN6X0g1ME1helk/view?usp=drivesdk
Akashsundar said:
It is the link of stock Indian eui 5.8.019s
https://drive.google.com/file/d/0BymbvUDXUaNlTjN6X0g1ME1helk/view?usp=drivesdk
Click to expand...
Click to collapse
Yes
Akashsundar said:
It is the link of stock Indian eui 5.8.019s
https://drive.google.com/file/d/0BymbvUDXUaNlTjN6X0g1ME1helk/view?usp=drivesdk
Click to expand...
Click to collapse
Thanks a lot
Have any one flash this ROM
If there is any bugs reply here I will prepare fix for it
Hello...
Where can I find the original rom for le max 2 x820 with no system update please
thanks .
http://g3.letv.cn/218/24/9/letv-hdt...1S-5.9.020S.zip?b=123456&platid=5&splatid=500
Is 23S whit recovery stock.
Ok so I did as said in your post, but big problem for me : My screen is not split in two and both side are reversed.... I tried install roms goind thought twrp the problem is the same, and doing the manipulation all over again trough flashone doesn't solve my problem either. I really need someone's help on this one please.
x820 64g 6g
---------- Post added at 04:23 PM ---------- Previous post was at 04:22 PM ----------
Akashsundar said:
Have any one flash this ROM
If there is any bugs reply here I will prepare fix for it
Click to expand...
Click to collapse
I do have problem (see the post right above). Any Ideas?
Ok so, I did as shown in the topic : https://forum.xda-developers.com/le-max-2/help/flash-eui-rom-fastboot-t3525831
download twrp (The one I know didn't had the touchscreen issue)
boot from twrp (wish I had know about it before!)
upload zip file to /sdcard ( here's the catch, while in TWRP in don't have access to adb, the phone doesn't connect to pc or I don't know even I mount it, could be me. So i just put the archive at the root of the phone before booting to twrp from adb)
install rom
reboot
And ... it's ****ING WORKING!*
Really big thanks to ThE_MarD for his help!
HI, i hv the same problem likes yours with split screen.
Possible to share the steps how you manage to solved it.
Update:
Hi, I just managed to resolved it.
Download the given recovery 19S and save it on a USB drive.
Run twrp and press button wipe as our screen is reversed.
Then look for the file at external drive USB.
Just install it and once it is done..... the screen will return to normal
deltasata said:
At the last step, my indian rom is not getting flashed. Saying corrupted!!. Yesterday I updated with the same (rom) file from the system updater when I did not root the device.
"[Update]: There's a simple method you could try to get the Update Option Back in Le Max 2 Phone that arrived with Vendor ROM... Using the default File Manager Tap on the Update.zip file and select Upgrade Option. This will force the phone to Update using the ROM file. This method is for people who could not update through the Stock Recovery and received Errors."
Following these steps got the same error.
Edit: I am pretty much sure the developer chinese rom has the issue. It does not let you update with the Indian rom. Pretty bad.
Did anyone succeed to flash the indian rom the phone came with, or any indian rom from these chinese developer rom?
Click to expand...
Click to collapse
Hi.
Yes. After "QFIL", i also didn't update my device from DEV ROM with any Stock ROM (Indian or Chinese versions) by "upgrade.zip" without get the "corrupted file" error. So by TWRP, i installed 16S Indian Stock ROM -- TWRP informed that i have "no OS installed" but i proceeded and restarted from TRWP. It initialized the new ROM, and after the first setup, i restarted the device to complete any system operations after the first boot, and i updated the device with the Indian 19S with the EUI updater ( tapped "upgrade.zip" file). The device now have the stock recovery and boot in english (not chinese), and the EUI in all languages available on "India 19S Stock ROM".
Stock ROMS:
Le Max 2 All Official Stock Firmware links
Best regards.
NextGear said:
Hi.
Yes. After "QFIL", i also didn't update my device from DEV ROM with any Stock ROM (Indian or Chinese versions) by "upgrade.zip" without get the "corrupted file" error. So by TWRP, i installed 16S Indian Stock ROM -- TWRP informed that i have "no OS installed" but i proceeded and restarted from TRWP. It initialized the new ROM, and after the first setup, i restarted the device to complete any system operations after the first boot, and i updated the device with the Indian 19S with the EUI updater ( tapped "upgrade.zip" file). The device now have the stock recovery and boot in english (not chinese), and the EUI in all languages available on "India 19S Stock ROM".
Stock ROMS:
Le Max 2 All Official Stock Firmware links
Best regards.
Click to expand...
Click to collapse
Hey bro, I have the same problem. What twrp you used? When I try to install 16s indian twrp gives an error "Patching system image..." for too much long time, so it stop to install it.