It's been a long day... Let me start by saying that i had my device rooted for a month without any issues. Last night, i noticed some apps were killing themselves for some reason but i didnt give it much thought. This morning while i was working, i noticed the phone app was crashing and not responding, so i decided to restart it. It ended up getting stuck on the T-Mobile boot screen. I tried to boot it into recovery mode, but it wasn't the normal recovery mode. It didnt give me option to scroll up and down with the volume keys. It's just a black screen with:
RECOVERY BOOTING......
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-G935T
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
FRP LOCK: OFF
WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE
HP SWREV: B3(2,1,1,1,1) K1 S2
SECURE DOWNLOAD: ENABLE
It just stays on this screen until i power the device off, and it goes right back into a bootloop. Also, i can't boot into safe mode either.
So, I figured I would try to flash the stock firmware with Odin. I downloaded the firmware and tried to flash it and got this error:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I did some searching and found that i might need to flash a .pit file, so i found the one for my device and put in in Odin. I tried to flash it and got this error:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
At this point, I have no idea what to do or try. I need my phone for work and ive already missed today. If anyone has any advice, it would be greatly appreciated!!!!!
tylerthedestroyer42 said:
It's been a long day... Let me start by saying that i had my device rooted for a month without any issues. Last night, i noticed some apps were killing themselves for some reason but i didnt give it much thought. This morning while i was working, i noticed the phone app was crashing and not responding, so i decided to restart it. It ended up getting stuck on the T-Mobile boot screen. I tried to boot it into recovery mode, but it wasn't the normal recovery mode. It didnt give me option to scroll up and down with the volume keys. It's just a black screen with:
RECOVERY BOOTING......
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-G935T
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
FRP LOCK: OFF
WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE
HP SWREV: B3(2,1,1,1,1) K1 S2
SECURE DOWNLOAD: ENABLE
It just stays on this screen until i power the device off, and it goes right back into a bootloop. Also, i can't boot into safe mode either.
So, I figured I would try to flash the stock firmware with Odin. I downloaded the firmware and tried to flash it and got this error:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I did some searching and found that i might need to flash a .pit file, so i found the one for my device and put in in Odin. I tried to flash it and got this error:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
At this point, I have no idea what to do or try. I need my phone for work and ive already missed today. If anyone has any advice, it would be greatly appreciated!!!!!
Click to expand...
Click to collapse
We need just a bit more info bro. What firmware you attempting to flash? And what firmware was already on the device? If you're on OTA would be good to note as well..
Sent from my SM-G935T using Tapatalk
tylerthedestroyer42 said:
It's been a long day... Let me start by saying that i had my device rooted for a month without any issues. Last night, i noticed some apps were killing themselves for some reason but i didnt give it much thought. This morning while i was working, i noticed the phone app was crashing and not responding, so i decided to restart it. It ended up getting stuck on the T-Mobile boot screen. I tried to boot it into recovery mode, but it wasn't the normal recovery mode. It didnt give me option to scroll up and down with the volume keys. It's just a black screen with:
RECOVERY BOOTING......
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-G935T
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
FRP LOCK: OFF
WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE
HP SWREV: B3(2,1,1,1,1) K1 S2
SECURE DOWNLOAD: ENABLE
It just stays on this screen until i power the device off, and it goes right back into a bootloop. Also, i can't boot into safe mode either.
So, I figured I would try to flash the stock firmware with Odin. I downloaded the firmware and tried to flash it and got this error:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I did some searching and found that i might need to flash a .pit file, so i found the one for my device and put in in Odin. I tried to flash it and got this error:
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
At this point, I have no idea what to do or try. I need my phone for work and ive already missed today. If anyone has any advice, it would be greatly appreciated!!!!!
Click to expand...
Click to collapse
You need check at "re-partition" in Option Tab, and in PIT Tab, you download PIT of G935T, browser it then flash with your ROM via Odin together. Magic is happening )
http://www.sammobile.com/forum/showthread.php?t=30628
Same issue here
I've tried to flash stock 4APIA to my SM-G935T TMO S7 Edge and I have not been able to get it to work. I am about to try the pit file, partition check and full 4 files to see if it will work now, I will keep you posted.
Have you been able to resolve the issue?
Related
I am trying to use CF Auto-Root for my GS-4 i9500. I power up my phone in "download mode" but as soon as i do it already says 'Downloading... Do not turn on target!!'. I waited for a while (watched a tv show so probably 40-45 min) and nothing changed. The upper left says; Odin mode, ..., Write Protection: Enabled, eMMC BURST MODE enabled. I turn it off and back on in download mode (still says 'Downloading...'), load up the binary, connect the phone to my comp (odin says 'Added!!' and recognizes the COM port it is connected to), and click start. About half the time i get:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Removed!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried 4 different USB ports and 3 different cables. I can simply click restart in odin and try again when i get this error
The other half i get:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
in the upper left on my phone I get, in red; start [224, 1440], secure magicode check fail : recovery. This requires me to reboot the phone for another attempt. I have clicked the PIT button in odin and there are no files there.
I have found some similar threads for the first failure but they all seem to require re-partitioning and re-make (?) the PIT file which is apparently "extremely risky". As for the second failure, I found several threads with a similar failure but they were regarding going back to stock and seemed to be caused by a bad recovery image?? On the up side my phone will still boot into factory software just fine, but I would really like to figure out what I'm f-ing up.
What am I doing wrong?
Thanks in advance for any help
If I were you, I would look for a custom recovery and flash this. I use Philz Touch Recovery, you can root it from it and it works perfect.
Links here: http://d-h.st/users/philz_touch/?fld_id=16644#files
flash it in Odin using AP.
Hey guys/gals . my phone locked up after a restart from updating magisk and now stuck on the s7 edge powered by android screen. i have tried to open twrp but it wont leave the earlier mentioned screen. i can however enter download mode. i tried using ODIN3 v3.12 reflashing the same BL, AP, CP and CSC but with no luck. i have also tried to flash the stock FW but get error on phone saying SW REV. CHECK FAIL. DEVICE: 2 BINARY: 1 after Odin fails and the log reads
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
The flash files I have used previously that worked are
twrp-3.1.0-0-hero2lte.img.tar (Used in BL for Root)
AP_G935FXXU1APD1_CL7538748_QB9125704_REV00_user_low_ship.tar.md5 (stock)
BL_G935FXXU1APD1_CL7538748_QB9125704_REV00_user_low_ship.tar.md5 (Stock)
CP_G935FXXU1APD1_CL7538748_QB9125704_REV00_user_low_ship.tar.md5 (Stock)
CSC_XSA_G935FXSA1APD1_CL7688684_QB9120478_REV00_user_low_ship.tar.md5 (stock)
HOME_CSC_XSA_G935FXSA1APD1_CL7688684_QB9120478_REV00_user_low_ship.tar.md5(Stock)
Is this recoverable or am I looking at an expensive paperweight. cheers
Edit. I can now boot into TWRP and download mode now, Just can't seem to get it to take an OS, the storage it showing up fine in TWRP and on a pc, except its empty space.
Any advice to solve this would be much appreciated
My G930A will no longer turn on. When I try to boot it into recovery, it shows the blue letters saying 'recovery booting' then, it shows a blue screen with the android logo that says 'installing system update'. It will switch between those screens over and over and sometimes boots into recovery but the screen is frozen so i cant do anything there. I am still able to boot into download mode though. the firmware version was G930AUCS8CRL1. I was able to flash the G930AUCS8CRJ2_ATT8CRJ2 firmware that is linked on xda, but it still has the same issues.
When I try to flash G930AUCU4CRE4_Oreo on Odin, it says:
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 5815 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> lksecapp.mbn
<ID:0/003> xbl.elf
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
As background, I had some success with rooting my device when it was in nougat, but I decided to revert to stock. I'm not sure if this is a residual effect of that...
This is what it says on the download screen:
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-G930A
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FRP LOCK: OFF
WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE
SECURE DOWNLOAD : ENABLE
Any help is greatly appreciated
Recovery Menu
Rasmubur000 said:
My G930A will no longer turn on. When I try to boot it into recovery, it shows the blue letters saying 'recovery booting' then, it shows a blue screen with the android logo that says 'installing system update'. It will switch between those screens over and over and sometimes boots into recovery but the screen is frozen so i cant do anything there. I am still able to boot into download mode though. the firmware version was G930AUCS8CRL1. I was able to flash the G930AUCS8CRJ2_ATT8CRJ2 firmware that is linked on xda, but it still has the same issues.
When I try to flash G930AUCU4CRE4_Oreo on Odin, it says:
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 5815 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> lksecapp.mbn
<ID:0/003> xbl.elf
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
As background, I had some success with rooting my device when it was in nougat, but I decided to revert to stock. I'm not sure if this is a residual effect of that...
This is what it says on the download screen:
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-G930A
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FRP LOCK: OFF
WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLE
SECURE DOWNLOAD : ENABLE
Any help is greatly appreciated
Click to expand...
Click to collapse
Replied in other thread as well, but I believe you need to use the key combo to access recovery.
After the screen with the blue letters that say "booting recovery" give it about 10 - 30 seconds and press and hold power while you tap (press and release) volume up, then release power. That will open your recovery menu.
Factory reset and should be good
Cheers and best of luck
Feel free to PM me if that doesn't work.
I'm good to follow directions, I can't troubleshoot. Hopefully someone here can give me some direction. All info below. TIA!
Samsung S7 Edge.
Originally Verizon.
Used Odin to reflash TMobile
Worked fine for months.
Went to reflash to Verizon or unlocked.
(Perhaps it partially worked if that's possible as its listed as G935u now?)
Phone is stuck in loop.
I cannot turn the phone off using the power button.
Only battery drain will power it down.
Once charged and on, can only get out of the loop by entering power/home/ Vdown.
If I press Home: I get barcodes, check.
If I press Volume Down, Cancel
Black Screen:
Recovery Booting small blue letters...
"installing system update" blue screen, android man, two circling arrows.
Black screen flash, repeat.
or eventually/sporadically:
"no command"- blue screen tilted Android Guy with Exclamation mark in triangle
If I choose volume up: Continue
Teal screen
Top Text :
Odin Mode (high speed)
Product Name SM-G935U
Current Binary: Samsung Official
System Status: Official
FRP Lock: Off
Warranty Void: 0x0
Qualcomm Secureboot: Enable
RP SWREV: B9(2,1,1,1,1) K9 S9
Secure Download: Enable
Screen: Downloading.....do not turn off target
I can connect odin.
In Odin 3.13 trying to flash full firmware (AP/BP/CP/CSCHome):
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 5463 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> lksecapp.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/00>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
On phone in red: SW Rev Check Fail: [aboot] Fused 9 > Binary 4
In Odin trying to flash TWRP if this is even possible.
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 43 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> RQT_CLOSE !!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On phone in red: Secure Check Fail: Recovery
~
maxweenus said:
On phone in red: SW Rev Check Fail: [aboot] Fused 9 > Binary 4
Click to expand...
Click to collapse
You need a more recent firmware file to flash.
This one will do the job: https://androidfilehost.com/?fid=6006931924117927499
bbsc said:
You need a more recent firmware file to flash.
Amazing. Thank you so much!
Curiosity- If I want to switch this back to Verizon per se, where can I find the updated firmware such as what you linked.
Probably a rookie move, but I've been sitting on Sammobile waiting a day and a half to download.
Click to expand...
Click to collapse
maxweenus said:
If I want to switch this back to Verizon per se, where can I find the updated firmware such as what you linked.
Click to expand...
Click to collapse
I think, the best way is to start here: https://www.verizonwireless.com/support/samsung-galaxy-s7-update/
They have a special "updater" tool which can "recover" your device.
Hi there,
The Samsung S7 Edge of a friend got stuck @boot. I have tried to reset and wipe. But that does not solve the problem.
So now i am trying to put on the latest official firmware from Samfw, Smammobile and/or Frija but Odin 3.14 fails.
I think the phone got stuck in an OTA update.
Please help
Here are more details.
S7 Edge SM-G935FD in the Netherlands (PHN), the G935F version should be working as well, its an exynos chipset with dual sim.
In download mode it says on top left:
Product Name: SM-G935F
Current Binary: Samsung Official
System Status: Official
FRP Lock is ON (i cannot go to devevlopper mode to change that)
Secure Donwload: Enabled
Warranty Void: 0
AP: SWREV: B:8 K:6 S:7
I followed all kind of guides on XDA
Get the right Odin 3.14
Get the right Firmware. Samfw.com_SM-G935F_PHN_G935FXXU8ETI2
Using Default Odin Settings
I have a connection to the phone.
This is the ODIN log:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1401)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 4045 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Dekay99 said:
Hi there,
The Samsung S7 Edge of a friend got stuck @boot. I have tried to reset and wipe. But that does not solve the problem.
So now i am trying to put on the latest official firmware from Samfw, Smammobile and/or Frija but Odin 3.14 fails.
I think the phone got stuck in an OTA update.
Please help
Here are more details.
S7 Edge SM-G935FD in the Netherlands (PHN), the G935F version should be working as well, its an exynos chipset with dual sim.
In download mode it says on top left:
Product Name: SM-G935F
Current Binary: Samsung Official
System Status: Official
FRP Lock is ON (i cannot go to devevlopper mode to change that)
Secure Donwload: Enabled
Warranty Void: 0
AP: SWREV: B:8 K:6 S:7
I followed all kind of guides on XDA
Get the right Odin 3.14
Get the right Firmware. Samfw.com_SM-G935F_PHN_G935FXXU8ETI2
Using Default Odin Settings
I have a connection to the phone.
This is the ODIN log:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1401)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 4045 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
OH just found this great article
[GUIDE] AN ESSENTIAL GUIDE FOR G935F/FD
AN ESSENTIAL GUIDE FOR G935F/FD DISCLAIMER ☆THIS WILL BE A HUGE WORD WALL, SO DON'T BOTHER WITH THIS IN ADVANCE IF YOU MIND READING LARGE AMOUNTS OF WORDS ON SCREEN :D ☆THIS ISN'T A ROOT GUIDE EXACTLY BUT WHEN YOU READ THIS TILL THE END...
forum.xda-developers.com
Did i read it well, and understand that FRP Lock is ON.. that prevents me to install anyting?
"But if you haven't rooted/enabled OEM Unlock before, this won't work either and you may had to take your phone to a repair shop "