Hello.
Today I updated my Lenovo K920 to latest CM13 rom and it works perfectly, though when I plug the phone to my computer or laptop with USB cable it is found as before, but my storage folder is empty, I do not have any access to DCIM or other folder as they are invisible, and windows (10) says the folder is empty. My phone is not blocked by password or pin etc. as it could be a reason why I can not reach my folder.
I updated my phone precisely as in this document : devs-lab.com/cyanogenmod-13-lenovo-vibe-z2-pro-row.html
Thanks in advance for any thought...
Kindest regards.
oh, sorry for dumb post. It turned out that I had to set mode to 'send files' from loading mode.
Resolved.
For all curious guys I updated to CM13 my china version of Lenovo (VIBE-UI) with cm-13.0-20160910-NIGHTLY-kingdom_row version and it works perfectly right now.
Kindest regards
Related
Hi again,
I was going to transfer some files from my pc to TPT today, and realised that it's not showing up on windows explorer.
(I can see the device in the Device Management screen).
In my tablet, under "USB settings", I selected "View contents of SD card (Mount)".
I went to the Lenovo download page and didn't see anything that looks like a driver for this..
Apologies for the very noobish question, but appreciate any help!
I think you should use "transfer files (Media Transfer Protocol)" as stated in the manuals.
Now, rather than creating another thread, i'll just ask here, since it's pretty much the same topic.
I have a problem with transferring files using cable data to my TPT, My pc recognize the TPT and shows the correct drive size and remaining memory. However, when i opened it, I cannot see any folders, files, or anything. I also can't create anything at all from my pc.
Any solution/thoughts on this?
I forgot to add some things :
- I'm using Windows 7 32 bit
- I'm using TPT 0074 ROW
- My TPT is rooted
- This is a new problem, which means originally, I don't have this problem. And sadly, I don't remember when exactly this problem appeared
- Factory reset is currently the very last option for me
hi,
I've connected my device to my laptop via USB cable that was supplied. so I've been using my device a while and copied music on and off it etc.
The past few days when I try to copy music or pictures to and from my device i get a error messages. I get the message a device attached to system is not functioning.
when i open the device folder under explorer i can only see folders and when i open the folders it says 0 items in the folder. but if I go in on my device there are files in the selected folder.
now I've searched the web from left to right and only get solutions for the note II mobile device that has a USB mass storage function, which the galaxy note 8.0 does not have.
I've downloaded Kies and USB drivers and it still did not resolve my issue.
i have a HP Probook 4540s running windows 8. I'm not very good with these kind of stuff at all.
any help would be greatly appreciated
For me that happens when there a problem with driver or kies .. I'd recommend reinstalling
Sent from my GT-N5100
Hi Guy's,
I had my Galaxy Note 3 stolen by some dirtbag and looking around for a replacement I decided on the K3. I'm loving it and thanks to Hackerpower's thread have rooted, and flashed it to get rid of all the bloatware etc.
What I am finding though is that when I connect it to my PC it is only showing as a CD with the beijing version of the lenovo manager software showing. I want to be able to transfer files from my PC and vis-versa but no matter what I select I cant access the phone as a storage device like I could with my Galaxy Note 3.
If I select Media Device on the phone I see it as a CD with the above software showing.
If I select USB Storage I get the same.
If I select Camera I get the Phone Storage directory with 2 subfolders DCIM and Camera
I have downloaded the USB drivers from Hackerpower's thread and also tried various other download sites, all act the same. And yes I have selected debug mode but have also tried it with this disabled and same result.
Any help would be greatly appreciated as this is the ONLY thing marring this great phone for me.
BTW I'm using Limonchello as the ROM.
Cheers
Install "Windows Media player 11" on pc, and you will resolve.
ps. Search on Youtube WMP11 installation
Hello guys, i've got some problem with file transfer both in pc to op5 and op5 to pc with USB, i don't know why but apparently the problem affect only medium to big files. I can transfer little files like jpg, while i have some problem with mp3, sometime work sometime not, if i insist generally work. If i try with huge files like the OTA now that i'm trying to upgrade the oxygen is not working at all. I suppose the drivers are properly installed since i can open the folders inside pc. Obviously the debug usb is active, i tryed to enable mtp in developer option (is normal that there isn't any mtp selection in the four transfer available? even if enabled mtp i still see "recharge" "file transfer" "photo transfer ptp" "midi"). I usually select file transfer, i don't even know what MIDI is and ptp is only about photos. The phone is rooted with the last official twrp and last magisk, the os is OOS 4.5.8. and is still encrypted. PC is with windows 10
edit: i can't even copy/paste those big files from a folder inside the phone to another one always in the phone.
Try using a USB 2.0 port
rickysidhu_ said:
Try using a USB 2.0 port
Click to expand...
Click to collapse
omg thank you so much, i'm such a noob. i thought all pc port usb were the same and apparently are not. I tried one on the back and it work fine. A minor problem remained tho, i still can't move stuff from folder to folder inside the phone but whatever..i can bring them out and in again in the folder i want.
vanzant83 said:
omg thank you so much, i'm such a noob. i thought all pc port usb were the same and apparently are not. I tried one on the back and it work fine. A minor problem remained tho, i still can't move stuff from folder to folder inside the phone but whatever..i can bring them out and in again in the folder i want.
Click to expand...
Click to collapse
Might be a long shot but try doing a simple restart of your phone and computer and see if that helps
Hi. I bought a Redmi Note 7 Global 32GB/3GB yesterday and I have problem with transferring files
When I connect my phone to my PC (win 10) via it's USB cable, a menu appears with 3 options on the phone:
*No data transfer
*File transfer
*Transfer photos (PTP)
No matter which one I choose, In all 3 situations a partition appears in "This PC" which is empty and there is no file or folder in it. When I commit to copy a file to it, this error shows up:
Cannot copy item
This device has either stopped responding or has been disconnected
I've no problem with my honor 3c (android 4.4) and other phones on my PC, Also they have MTP option which connects so fast and let me transfer all file and folders.
What should I do?
It's kind of weird because now the phone is recognized and working well via USB 3 but USB 2 still has the above-mentioned problem.
I also have an old pc which I have linux lite, Chalet OS, and lubuntu on it. surprisingly file transfer works on linux lite and chalet OS via USB 1.1 - 2.0.
Can anyone use file transfer on windows via USB 2 port?
Hey man, I just bought the same phone today, 32/3gb and global, when I tried to connect it the first time that happened and I got scared.
I researched a bit and did a few things, deleted the drivers and the device in windows 10 device manager, reinstalled them and factory resetted my phone, and now is working well. I think the factory reset did the trick.
I hope this helps you. Cheers.
Psicovirus said:
Hey man, I just bought the same phone today, 32/3gb and global, when I tried to connect it the first time that happened and I got scared.
I researched a bit and did a few things, deleted the drivers and the device in windows 10 device manager, reinstalled them and factory resetted my phone, and now is working well. I think the factory reset did the trick.
I hope this helps you. Cheers.
Click to expand...
Click to collapse
Hey. Thanks for sharing your solution. So you've experienced the same problem. Did you test USB 3 before uninstalling drivers and resetting your phone?
Are you able to see your phone's content and transfer via USB 2?
aqua07 said:
Hey. Thanks for sharing your solution. So you've experienced the same problem. Did you test USB 3 before uninstalling drivers and resetting your phone?
Are you able to see your phone's content and transfer via USB 2?
Click to expand...
Click to collapse
Hello, sorry for the late response, I hope you found a solution early, but if not, I used both USB 2.0 and 3.0 (I think that's what you're referring to) and it did not work, after the reset and unistallation of drivers, both of them worked. I also have to say that I was using the cable issued in the box where the phone came, I'm still using it without trouble.