Database Users

India DDLR9 - Installation + Root + Mods

Download :
Getting OTA
OTA will be available if you are on full stock Indian ROM.
So user who are on other ROM OR on rooted LR6 with other kernel first follow this
First make backup of your data.
If you are on ICS ROM, wipe cache and data with safe kernel
If you are on GB ROM, straightway wipe cache and data
Check your CSC by *#272*IMEI#
If it is not set to INU, you won't get update, if you have have choice to select INU from list, select it. it will erase your data.
If you dont have INU in the list, Flash CSC of LR6 with CSC tab of PC odin.
PS. All i have described regarding CSC, should be performed under safe kernel.
Once after checking CSC is set to INU, Flash DDLR6 ROM with PC odin, After flashing LR6 successfully you will get OTA for LR9.
Full ROM Installation
You can use PC odin OR Mobile Odin to flash, here below steps for both method.
Installation with PC Odin
1.a Pre installation : (For clean installation, optional)
- Make backup with Titanium Backup or other similiar app.
- First flash GB ROM if you are on any other Custom ROM, wipe cache, data from recovery on GB ROM
- If you are on ICS ROM, flash safe kernel if you are on stock kernel then wipe cache and data
1.b Final Installation
- Download ICS ROM, and extract it to .tar file
- Download Odin, open it
- select PDA tab and point to ROM file. Leave Re-partition, pit, CSC, Phone tab unticked (see Image below)
- Switch off device, Put in download mode (Vol down + Home + Power)
- completely close kies, Anti virus if running
- Connect device to PC
- ID com port shud turn yellow (see image)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now hit Start
It will start processing and once finish successfully, you can see 'Pass' (see image)
Now disconnect device, it will reboot itself.
Rooting :
Use this thread method 1.
Installation with Mobile Odin Image have name is vary according your ROM, image is just for demo purpose.
If you have rooted device with stock ROM, you can use Mobile odin
-Download ROM and exract file and copy to Int/Ext SD card
-Download safe kernel in tar and copy to SD card
-Open Mobile odin, select open file and point to ROM file you have copied
-Now all required field will be filled up
-Open Kernel tab and point to Safe kernel file in tar, you have copied (see image below)
-Flash
Keyboard error 'null typing'
-Download This
-Flash using PC Odin with CSC tab (recommended on safe kernel)
Mods :
-Transparent accuwether
-Transparent News and wether
-Call Recording
-15 Toggle systemUI
-TopicWall
Note2/S3 Livewallpaper
1.Feathers
2.Drop :
3.Dandelion
Changelog :
- new launcher (like the Galaxy S3)
- new gallery with fancy 3D effects
- new contact list
- pop-up video can now be resized
- Chat On and flipboard new application

Thanks Doc, but what I have observed is that if you have rooted ever and have installed mods or replaced system apps, then OTA is not successful, I was on stock LR6 with stock kernel and INU csc but OTA failed twice (after download, unsuccessful attempt to update), I un-rooted but still no luck, so I tried this,
1. Flashed stock Indian GB firmware using pc odin
2. Performed full wipe in stock recovery
3. Updated to latest available update LR6 using kies.
4. Then updated to LR9 OTA
Now I have rooted it again and have installed all mods

found the ota downloaded but cannot install...
after rebooting it goes into installation screen (green android with rotating Dodecahedron or Icosidodecahedron)
then after 5 sec or 5% cell reboots with message "updating failed try updating through kies later" ( or something like that).
and there is no update for kies as of yet.
what to do??
i am on stock rom with speedmod k3-13 and rooted with CWM method.
i saw your method.. is there any other method.. i dont want to wipe/f reset..
thanks

Thanks. It worked!!!

bitts said:
found the ota downloaded but cannot install...
after rebooting it goes into installation screen (green android with rotating Dodecahedron or Icosidodecahedron)
then after 5 sec or 5% cell reboots with message "updating failed try updating through kies later" ( or something like that).
and there is no update for kies as of yet.
what to do??
i am on stock rom with speedmod k3-13 and rooted with CWM method.
i saw your method.. is there any other method.. i dont want to wipe/f reset..
thanks
Click to expand...
Click to collapse
you should be on stock kernel to update officially (kies or OTA)

Why we are not having rom to flash through odin instead???

@ jeetu
Yes jeetu, that why i have asked to flash stock LR6 before flashing OTA.

Can I flash stock LR6 using Mobile Odininstead of PC Odin? I got the OTA but failes to install because on HydraCore. So need to go back to stock kernel as you advised.

geoux said:
Can I flash stock LR6 using Mobile Odininstead of PC Odin? I got the OTA but failes to install because on HydraCore. So need to go back to stock kernel as you advised.
Click to expand...
Click to collapse
Ok first wipe cache and data
then flash LR6 using mobile odin, dont select ever root option. or dont change kernel from stock.

jeetu1981 said:
you should be on stock kernel to update officially (kies or OTA)
Click to expand...
Click to collapse
i reinstalled DDLR6 kernel and OTA worked fine.
oh and dint wipe/f reset.. and i am still rooted after the update

dr.ketan said:
Ok first wipe cache and data
then flash LR6 using mobile odin, dont select ever root option. or dont change kernel from stock.
Click to expand...
Click to collapse
Thanks. Did as you suggested. Now am on stock DDLR6 with stock kernel and without root. But software update is saying "No Updates Available". Confused.

geoux said:
Thanks. Did as you suggested. Now am on stock DDLR6 with stock kernel and without root. But software update is saying "No Updates Available". Confused.
Click to expand...
Click to collapse
Check your csc by code mentioned in op
Sent from my GT-N7000 using xda premium

bitts said:
i reinstalled DDLR6 kernel and OTA worked fine.
oh and dint wipe/f reset.. and i am still rooted after the update
Click to expand...
Click to collapse
Great!! you can now flash your fav. safe kernel and enjoy it.
OTA works sometimes even if you are rooted but I doubt it works if you have replaced lot of system apps including systemui and all like in my case

I am on lr9 with call mod and 15 toggle and more.
The launcher is fast but somehow little bit laggy.and apps which are on main page which is in sd card then wen u reboot they will disappear....dats not good.
I hav flashed dr ketans pre rooted gb rom and used mobile odin to flash lr6 with stock kernel.
So my lr6 was also rooted.but guys dont put any mod or something please.den i upgraded to lr9 thru ota.nd still was rooted wd supersu and cwm.
Then i flashed hydracore kernel thru mobile odin.so now m on lr9 wd hydracore and with mods
Sent from my GT-N7000 using xda app-developers app

wow, great battery life
Got the DDLR9 OTA update yesterday, according to me this was the best update I have ever got, the battery life has improved a lot after this update. :good: . thanks very much sammy.

operation sucess but patient dead..
Hii dr.ketan juss now my phone was updated through ota.. My phone showed me.. Updated sucessfully but i cant get home screen..
A black screen qith a notification tray was visible.. Nothng more than that.. I saw the build version from settings it shows LR9.. But i cant see any launcher.. It remains a black screen only with a notification tray.. What to do...???
:crying:

Do you have updated clean?
I mean have yo wipe cache and data previous to update?
BTW this is not pt dead, but it is still under COMA post anaesthesia., you need to give reversal

dr.ketan said:
Do you have updated clean?
I mean have yo wipe cache and data previous to update?
BTW this is not pt dead, but it is still under COMA post anaesthesia., you need to give reversal
Click to expand...
Click to collapse
i was on my wifi connection.. my phone automatically downloaded the update.. so what to do now... shall goto recovery mode and clean the cache??

rohi said:
Hii dr.ketan juss now my phone was updated through ota.. My phone showed me.. Updated sucessfully but i cant get home screen..
A black screen qith a notification tray was visible.. Nothng more than that.. I saw the build version from settings it shows LR9.. But i cant see any launcher.. It remains a black screen only with a notification tray.. What to do...???
:crying:
Click to expand...
Click to collapse
Go to setting/applications/All/TouchWiz home and clear data, this should solve the problem.

updated to lr9.. it is better then lr6
Sent from my GT-N7000 using Tapatalk 2

[Q] Confused

Hi. I am really a noob about this. I hope you guys can give me a hand.
I have a samsung galaxy i9505 rooted via ODIN and was able to install the latest non-touch recovery (CWM). Now I want to install a custom ROM. What I find interesting is the arrow ROM http://forum.xda-developers.com/showthread.php?t=2349774. Now my question is how do I install this properly? I have android 4.2.2 with baseband i9505xxubmg5. This is considered stock as I got it from a carrier locked phone from Globe telecoms Philippines. Do I install the zip file from Arrow ROM 4.3 under CWM recovery? What about ODIN? Do I need to do something under ODIN before proceeding to flashing a custom ROM?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Do I need to load a bootloader? What do I load on PIT, CSC, PHONE?

MasterYodaMD said:
Hi. I am really a noob about this. I hope you guys can give me a hand.
I have a samsung galaxy i9505 rooted via ODIN and was able to install the latest non-touch recovery (CWM). Now I want to install a custom ROM. What I find interesting is the arrow ROM http://forum.xda-developers.com/showthread.php?t=2349774. Now my question is how do I install this properly? I have android 4.2.2 with baseband i9505xxubmg5. This is considered stock as I got it from a carrier locked phone from Globe telecoms Philippines. Do I install the zip file from Arrow ROM 4.3 under CWM recovery? What about ODIN? Do I need to do something under ODIN before proceeding to flashing a custom ROM? Do I need to load a bootloader? What do I load on PIT, CSC, PHONE?
Click to expand...
Click to collapse
Download and copy the custom rom to your Sdcard and boot into CWM recovery (Do a nandroid backup)(Follow arrow's tutorial on how to flash hes rom)Do a fullwipe and Flash the rom ,Once your done flashing and set it up your phone you need to flash 4.3 or 4.4.2 GSM modem via odin in order to fix your Signal droppin issue Check which modem you need from here base from your country. and Download and flash the modem from here Have a nice day.

Repulsa said:
Download and copy the custom rom to your Sdcard and boot into CWM recovery (Do a nandroid backup)(Follow arrow's tutorial on how to flash hes rom)Do a fullwipe and Flash the rom ,Once your done flashing and set it up your phone you need to flash 4.3 or 4.4.2 GSM modem via odin in order to fix your Signal droppin issue Check which modem you need from here base from your country. and Download and flash the modem from here Have a nice day.
Click to expand...
Click to collapse
wow, thank you for that reply. I am now clearing my head a bit. You said base from my country. I dont have any idea what modem or base it is. Will it affect my phone being a carrier locked from Globe telecom Philippines? Where do I get the info to get these areas filled?

MasterYodaMD said:
wow, thank you for that reply. I am now clearing my head a bit. You said base from my country. I dont have any idea what modem or base it is. Will it affect my phone being a carrier locked from Globe telecom Philippines? Where do I get the info to get these areas filled?
Click to expand...
Click to collapse
FLash this modem via odin by selecting phone/cp after flashing the custom rom , or you can do an opposite way flash the Modem/custom rom.

Repulsa said:
FLash this modem via odin by selecting phone/cp after flashing the custom rom , or you can do an opposite way flash the Modem/custom rom.
Click to expand...
Click to collapse
thanks, how did you find out which modem is for my phone. I just curious so that I could learn how to do that as well.

MasterYodaMD said:
thanks, how did you find out which modem is for my phone. I just curious so that I could learn how to do that as well.
Click to expand...
Click to collapse
From this one
. MODEM at the bottom.:laugh:

Repulsa said:
From this one
. MODEM at the bottom.:laugh:
Click to expand...
Click to collapse
where will I find it i my phone which says I9505XXUFNBE? Checking under my "about device" baseband says i9505dxubmg5 with build number JDQ39.i9505XXUBMG5. I cant find I9505XXUFNBE.
btw, why does it say no info on that firmware found?

MasterYodaMD said:
where will I find it i my phone which says I9505XXUFNBE? Checking under my "about device" baseband says i9505dxubmg5 with build number JDQ39.i9505XXUBMG5. I cant find I9505XXUFNBE.
Click to expand...
Click to collapse
Mate , You need to Download/extract/flash the Link i gave you via odin . (Make sure you install Samsung driver to your computer) Turn off your phone manually and wait atleast 10 sec and then hold and press power+VolDown in order to boot into download mode . now open odin and Select phone/CP (Find the .Tar you extracted) Connect both cables wait until you see the (ID.Com became blue in odin) and click start ! once its done it should reboot automatically then remove the cable . Go to your phone setting and check if the baseband change to FNBE. IF that doesnt work try this one
Use Odin
Untick Autoreboot
Flash modem
Reboot once again into Download Mode using (Power+VolDown)
Flash Modem once more
Once done,unplug then reboot device manually.
If this doesn't work, try repeating the flash process again while rebooting manually and with auto-reboot option turned off.

Repulsa said:
Mate , You need to Download/extract/flash the Link i gave you via odin . (Make sure you install Samsung driver to your computer) Turn off your phone manually and wait atleast 10 sec and then hold and press power+VolDown in order to boot into download mode . now open odin and Select phone/CP (Find the .Tar you extracted) Connect both cables wait until you see the (ID.Com blue sign in odin) and click start ! once its done it should reboot automatically then remove the cable . Go to your phone setting and check if the baseband change to FNBE. IF that doesnt work try this one
Use Odin
Untick Autoreboot
Flash modem
Reboot once again into Download Mode using (Power+VolDown)
Flash Modem once more
Once done,unplug then reboot device manually.
If this doesn't work, try repeating the flash process again while rebooting manually and with auto-reboot option turned off.
Click to expand...
Click to collapse
ok thank you. I just finished downloading the ROM from arrow. its hella huge file for a ROM its 1.18gb. I will flash the rom then do exaclty what you told me on my modem flash update. Will message you as soon as I am done with the custom rom, Thanks so much.

MasterYodaMD said:
ok thank you. I just finished downloading the ROM from arrow. its hella huge file for a ROM its 1.18gb. I will flash the rom then do exaclty what you told me on my modem flash update. Will message you as soon as I am done with the custom rom, Thanks so much.
Click to expand...
Click to collapse
I get a system 7 error installation aborted. the arrow rom is XXUEMK8 that I am trying to install. does this have anything to do with the baseband I have which is i9505xxubmg5? Now I am restoring backup. Its taking awhile. Need help on this.

MasterYodaMD said:
I get a system 7 error installation aborted. the arrow rom is XXUEMK8 that I am trying to install. does this have anything to do with the baseband I have which is i9505xxubmg5? Now I am restoring backup. Its taking awhile. Need help on this.
Click to expand...
Click to collapse
Try and download this file then copy it to your sd card , boot into recovery and Flash , Once done reboot recovery and now do a fullwipe and Flash the rom

Soft bricked, can't find stock roms, it's been 18 hours, I'm slowly losing my mind...

SM-N910G, I flashed chainfire's auto root without first using the Dr K/PhilZ forced/submissive whatever kernel first.
I can't seem to find a normal stock rom to push through Odin without encountering a sea of dodgy download sites.
Can anyone help? Just want a 5.1.1 stock rom...
Even any of the other 5.1.1 builds like Simpl, I can't seem to find a tar file.
Any nudges in the right direction would be very handy.
Thanks in advance.

Ignition75 said:
SM-N910G, I flashed chainfire's auto root without first using the Dr K/PhilZ forced/submissive whatever kernel first.
I can't seem to find a normal stock rom to push through Odin without encountering a sea of dodgy download sites.
Can anyone help? Just want a 5.1.1 stock rom...
Even any of the other 5.1.1 builds like Simpl, I can't seem to find a tar file.
Any nudges in the right direction would be very handy.
Thanks in advance.
Click to expand...
Click to collapse
If you want to return to stock.
Download Samfirm from here: http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
Then extract the files and run the tool.
Then enter the model as SM-N910G and the region you are in (CSC)
Then tick the 'Auto' box and press 'Check Update' and the 'Decrypt automatically'
It should look something like this, I put INS which is for India.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then extract the firmware from the downloaded file using an archive tool such as Winrar and flash it via Odin.
Or use Sammobile.
If you want to install a custom ROM you will need to flash a custom recovery, for the N910G I would recommend this one (TWRP 2.8.7.0):
Download the twrp-2.8.7.0-trltedt.img.tar
https://dl.twrp.me/trltedt/
Flash it using Odin and your phone in download mode.

download stock firmware from sammobile (google it) and flash it with ODIN.
***DO NOT *** download and flash latest 5.1.1 firmware with build number "COJ5" as the latest version of 5.1.1 locks down the bootloader download any version below coj5

dork997 said:
download stock firmware from sammobile (google it) and flash it with ODIN.
***DO NOT *** download and flash latest 5.1.1 firmware with build number "COJ5" as the latest version of 5.1.1 locks down the bootloader download any version below coj5
Click to expand...
Click to collapse
Unless you do not care about downgrading to lower bootloaders. It works fine otherwise. But having it locked does suck if you want to downgrade. No way to do it..... Yet.

Thanks for the help fellas, I ended up finding "N910GDTU1COJ3" which I'm flashing with Odin now.
Next time I'll flash the Dr K kernel before I do anything else...
Time to update my sig as well

Battlehero said:
If you want to return to stock.
Download Samfirm from here: http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
Then extract the files and run the tool.
Then enter the model as SM-N910G and the region you are in (CSC)
Then tick the 'Auto' box and press 'Check Update' and the 'Decrypt automatically'
It should look something like this, I put INS which is for India.
Then extract the firmware from the downloaded file using an archive tool such as Winrar and flash it via Odin.
Or use Sammobile.
If you want to install a custom ROM you will need to flash a custom recovery, for the N910G I would recommend this one (TWRP 2.8.7.0):
Download the twrp-2.8.7.0-trltedt.img.tar
https://dl.twrp.me/trltedt/
Flash it using Odin and your phone in download mode.
Click to expand...
Click to collapse
This morning I grabbed a stock ROM from SamMobile and flashed it with Odin, no joy, stuck loading for about 10 minutes. It stopped boot looping at least.
So now I'm following your procedure, I will let you know how I get on.
It's a shame I can't use ADB otherwise I could just flash the Dr K kernel and then auto root with chainfire's tool... I've gotta use Odin for now...
It's downloading now with a CSC code of OPS...

Ignition75 said:
The process you detailed above is what bricked my phone in the first place.
This morning I grabbed a stock ROM from SamMobile and flashed it with Odin, no joy, stuck loading for about 10 minutes. It stopped boot looping at least.
So now I'm following your procedure, I will let you know how I get on.
It's a shame I can't use ADB otherwise I could just flash the Dr K kernel and then auto root with chainfire's tool... I've gotta use Odin...
Click to expand...
Click to collapse
After ODIN flashing, when it hangs, pull battery go into stock recovery and do factory reset.

I can't extract the enc4 files, both 7zip and WinRar don't recognise it...
Tried downloading twice...
I'll go back to my SamMobile download and see if factory resetting will work as suggested by DS...

Ignition75 said:
This morning I grabbed a stock ROM from SamMobile and flashed it with Odin, no joy, stuck loading for about 10 minutes. It stopped boot looping at least.
So now I'm following your procedure, I will let you know how I get on.
It's a shame I can't use ADB otherwise I could just flash the Dr K kernel and then auto root with chainfire's tool... I've gotta use Odin for now...
It's downloading now with a CSC code of OPS...
Click to expand...
Click to collapse
Stock recovery doesn't allow me to do anything, just hangs there with a "Downloading...." message under the green Android Icon.

Ignition75 said:
I can't extract the enc4 files, both 7zip and WinRar don't recognise it...
Tried downloading twice...
I'll go back to my SamMobile download and see if factory resetting will work as suggested by DS...
Click to expand...
Click to collapse
Oops I wasn't using "Decrypt Automatically"
Let me try that again

Battlehero said:
If you want to return to stock.
Download Samfirm from here: http://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
Then extract the files and run the tool.
Then enter the model as SM-N910G and the region you are in (CSC)
Then tick the 'Auto' box and press 'Check Update' and the 'Decrypt automatically'
It should look something like this, I put INS which is for India.
Then extract the firmware from the downloaded file using an archive tool such as Winrar and flash it via Odin.
Or use Sammobile.
If you want to install a custom ROM you will need to flash a custom recovery, for the N910G I would recommend this one (TWRP 2.8.7.0):
Download the twrp-2.8.7.0-trltedt.img.tar
https://dl.twrp.me/trltedt/
Flash it using Odin and your phone in download mode.
Click to expand...
Click to collapse
So I've just tried a stock ROM I downloaded using this tool, still hanging when trying to boot.
V Frustruating, the stock recovery doesn't allow you to do anything.
I need to convert Dr K's kernel to a tar file somehow so I can flash in Odin... I'm on 5.1.1 and there is a known issue with the bootloader.

Ignition75 said:
So I've just tried a stock ROM I downloaded using this tool, still hanging when trying to boot.
V Frustruating, the stock recovery doesn't allow you to do anything.
I need to convert Dr K's kernel to a tar file somehow so I can flash in Odin... I'm on 5.1.1 and there is a known issue with the bootloader.
Click to expand...
Click to collapse
Check PM.

There seems to be some confusion here, people are telling me, even on other threads, to do a factory reset in the stock recovery tool.
There might be an issue with recovery then, because I've only got a green android logo with "Downloading..." on the screen, nothing else is available to me.
It's not like previous bootloaders I've used where you use the volume key to select options etc, I literally can't do anything except flash from Odin.
Yes I have tried to flash TWRP using Odin, it didn't work...

OMG... By random luck I decided to hold the volume up key instead of down key when powering on and hey presto I have TWRP...
36 hours of my life I want back!

Ignition75 said:
OMG... By random luck I decided to hold the volume up key instead of down key when powering on and hey presto I have TWRP...
36 hours of my life I want back!
Click to expand...
Click to collapse
That's how to boot into recovery. By holding Volume UP, Home Button while powering on.

[Odin] [Official] Firmware EPJ2 TW 6.0.1 for Note 4 [SM-N910T/SM-N910T3] 10/24/2016

[Odin] [Official] Firmware EPJ2 TW 6.0.1 for SM-N910T / SM-N910T3 Latest version 10/24/2016
Warning!!! This ODIN firmware will upgrade your bootloader to EPJ2, and you might not be able to revert back to old bootloader. Do not flash this if you plan to go back to old bootloader.
Confirmed FOR T3 Users :
This ODIN firmware will upgrade your bootloader to EPJ2, and you will NOT BE ABLE to revert back to old bootloader. DO NOT FLASH this if you plan to go back to old bootloader.
Info:
This is a latest Odin-flashable official firmware for Samsung Galaxy Note 4 (SM-N910T / SM-N910T3). You can use this if you want to restore your phone to complete stock. Download the one based on your phone model.
Flashing guide:
1. Download and extract the zip file containing your desired firmware.
2. Open Odin Tool, you would need at least 3.11.1 of ODIN.
3. Boot your device in the "Download Mode":
Press Volume Down, Power and Home buttons at same time for 5-8 seconds until download mode is active.
4. Connect your device to PC via the USB cable while in download mode.
5. Next, check the "Auto Reboot" and "F. Reset Time" options in Odin Tool.
6. Hit the AP/PDA button then browse and select tar.md5 file from the extracted folder.
7. Finally press the start button to begin flashing the firmware update on your device.
SM-N910T Full Firmware:
N910TUVU2EPJ2_N910TTMB2EPJ2.zip
MD5: 35092E88E374F5F690E6C674DC7A10CF
SM-N910T3 Full Firmware:
N910T3UVU3EPJ2_N910T3TMB3EPJ2.zip
MD5: DEA83F49D94F8A6EBFEB4499267CF305
Need TWRP Flashable zip??? Look here:
http://forum.xda-developers.com/not...rom-n910t3uvu3epj2-stock-rooted-odex-t3501592

pvsgh said:
[Odin] [Official] Firmware EPJ2 TW 6.0.1 for SM-N910T / SM-N910T3 Latest version 10/24/2016
Warning!!! This ODIN firmware will upgrade your bootloader to EPJ2, and you might not be able to revert back to old bootloader. Do not flash this if you plan to go back to old bootloader.
Info:
This is a latest Odin-flashable official firmware for Samsung Galaxy Note 4 (SM-N910T / SM-N910T3). You can use this if you want to restore your phone to complete stock. Download the one based on your phone model.
Flashing guide:
1. Download and extract the zip file containing your desired firmware.
2. Open Odin Tool, you would need at least 3.11.1 of ODIN.
3. Boot your device in the "Download Mode":
Press Volume Down, Power and Home buttons at same time for 5-8 seconds until download mode is active.
4. Connect your device to PC via the USB cable while in download mode.
5. Next, check the "Auto Reboot" and "F. Reset Time" options in Odin Tool.
6. Hit the AP/PDA button then browse and select tar.md5 file from the extracted folder.
7. Finally press the start button to begin flashing the firmware update on your device.
SM-N910T Full Firmware:
N910TUVU2EPJ2_N910TTMB2EPJ2.zip
MD5: 35092E88E374F5F690E6C674DC7A10CF
SM-N910T3 Full Firmware:
N910T3UVU3EPJ2_N910T3TMB3EPJ2.zip
MD5: DEA83F49D94F8A6EBFEB4499267CF305
Click to expand...
Click to collapse
This is just security patches.... nothing major
Sent from my Nexus 7 using Tapatalk

When you say it isn't possible to go back to older bootloader, does it include EPE3/EPE2 & DOK2 bootloader or were only talking about the earlier bootloader?

As we get longer in the tooth on the Note 4, it would be good to know.
Can we revert from...
LP
MM EPE3
MM EPG2
MM EPJ2
Sent from my SM-G935T using Tapatalk

jnx_r said:
When you say it isn't possible to go back to older bootloader, does it include EPE3/EPE2 & DOK2 bootloader or were only talking about the earlier bootloader?
Click to expand...
Click to collapse
ytj87 said:
As we get longer in the tooth on the Note 4, it would be good to know.
Can we revert from...
LP
MM EPE3
MM EPG2
MM EPJ2
Sent from my SM-G935T using Tapatalk
Click to expand...
Click to collapse
Not unless, someone upgrade and then try to downgrade

OK, dumb question. I've rooted devices, put custom ROMs on them, wiped them, etc. all before. But one thing I'm not sure about.
If I flash this EPJ2 using Odin, would that wipe out all my apps and settings? Or would I only lose root until I re-root?
Just wondering if I should plan on backing everything up. Thanks.

I took the plunge from maximum overdrive, phone feels smoother than before.

ranchosteve said:
I took the plunge from maximum overdrive, phone feels smoother than before.
Click to expand...
Click to collapse
Did you download the new update? If so how's the device feels and also did you flash the update or Odin it! Thanks
Sent from my SM-G935T using Tapatalk

Flashed the file above un odin. Came from overdrive with beastmode kernel. Although I miss the customization my phone always felt laggy. I debloated, rooted and installed Xposed. So far so good

GCymbala said:
OK, dumb question. I've rooted devices, put custom ROMs on them, wiped them, etc. all before. But one thing I'm not sure about.
If I flash this EPJ2 using Odin, would that wipe out all my apps and settings? Or would I only lose root until I re-root?
Just wondering if I should plan on backing everything up. Thanks.
Click to expand...
Click to collapse
Make a backup of everything and the flash it. If your settings and stuff are there, then you got luck. If not use your backup to restore your stuff. Simple and easy..

galaxyuser88 said:
Make a backup of everything and the flash it. If your settings and stuff are there, then you got luck. If not use your backup to restore your stuff. Simple and easy..
Click to expand...
Click to collapse
I don't think your backup will be useful if u coming from OD, u just running pure stock no customization
Sent from my SM-G935T using Tapatalk

Update the warning message in OP, T3 users will not be able to downgrade to older bootloader once upgraded to EPJ2.

---------- Post added at 01:59 PM
[/COLOR]
ranchosteve said:
Flashed the file above un odin. Came from overdrive with beastmode kernel. Although I miss the customization my phone always felt laggy. I debloated, rooted and installed Xposed. So far so good
Click to expand...
Click to collapse
mfc719 said:
Have you tried to install overdrive again? Just curious to see if it works.
Sent from my SM-G935T using XDA-Developers mobile app
Click to expand...
Click to collapse

You can still install all the TW based MM roms without any issues after upgrading to EPJ2, no problem with wifi/nfc etc.

pvsgh said:
You can still install all the TW based MM roms without any issues after upgrading to EPJ2, no problem with wifi/nfc etc.
Click to expand...
Click to collapse
The question can you use OD V3.2 after upgrading to EPJ2.....cause OD said you would lose his Rom once you update. Has anyone tried that yet?
Sent from my SM-G935T using Tapatalk

weakenfalls01 said:
The question can you use OD V3.2 after upgrading to EPJ2.....cause OD said you would lose his Rom once you update. Has anyone tried that yet?
Sent from my SM-G935T using Tapatalk
Click to expand...
Click to collapse
As, I said any TW MM will work. If you install EPJ2 on top of another ROM, you will obviously lose customization.
If you need to go back to OD, you would need to Wipe your ROM and install OD through TWRP recovery.

pvsgh said:
As, I said any TW MM will work. If you install EPJ2 on top of another ROM, you will obviously lose customization.
If you need to go back to OD, you would need to Wipe your ROM and install OD through TWRP recovery.
Click to expand...
Click to collapse
Ok, just wanted to know if I could still use OD on the new bootloaders. Wasn't sure if I could still use custom MM ROM's.

@OvrDriVE Let say I updated to EPJ2 would I still be able to flash v3.2 on top of that? I'm just curious!
Thanks
Sent from my SM-G935T using Tapatalk

My experience is that you can downgrade from the MM Series of T-Mobile Firmware BLs and Modems.
For example, I was successfully able to switch between DOK2, EPE3 and EPJ2 using Odin 3.11.1.
I'll include just the Bootloader (BL) and Modem (CP) Odin files in case anyone wants 'em, as I usually find them in a post somewhere down the line on the official firmware comments.
WARNING: Files are for the T-Mobile Variant Note 4, SM-910T. (I don't own nor have tested these with the 910T3 version.)
Latest Odin 3.12.3
https://drive.google.com/open?id=0B6suAOyAEfoOal90VzVyckJJQzg
EPJ2 6.0.1 Marshmallow BL and Modem (as of October 2016, Latest)
https://drive.google.com/open?id=0B6suAOyAEfoOMWRvVmJWTzItS0E
EPE3 6.0.1 Marshmallow BL and Modem
https://drive.google.com/open?id=0B6suAOyAEfoOZFQ3SkVnWmVOdGs
DOK2 5.1 Lollipop BL and CP
https://drive.google.com/open?id=0B6suAOyAEfoOSUtudWZCWTNncHM
Quickie Instructions I have on a notepad file along with these files on my SD Card for reference.
Found it on some forum or site that was real helpful!
INSTALLING THESE FILES
1. Load phone in download mode. (Vol down+Home+Power)
2. Open ODIN3 on your computer. (Make sure the Samsung drivers are installed, you can install KIES to get these.)
3. Load the bootloader file in BL.
3a. Load the modem file in CP.
4. Hit the start button, and let the files flash.
5. If there are no error messages in the log portion of ODIN3, then you have successfully flashed and upgraded to the bootloader/modem.
Note: You can check this in your "Settings - About Phone" section.
Here's a screenie from my CM 12.1 flashed phone.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

StromKnight said:
My experience is that you can downgrade from the MM Series of T-Mobile Firmware BLs and Modems.
For example, I was successfully able to switch between DOK2, EPE3 and EPJ2 using Odin 3.11.1.
I'll include just the Bootloader (BL) and Modem (CP) Odin files in case anyone wants 'em, as I usually find them in a post somewhere down the line on the official firmware comments.
WARNING: Files are for the T-Mobile Variant Note 4, SM-910T. (I don't own nor have tested these with the 910T3 version.)
Latest Odin 3.12.3
https://drive.google.com/open?id=0B6suAOyAEfoOal90VzVyckJJQzg
EPJ2 6.0.1 Marshmallow BL and Modem (as of October 2016, Latest)
https://drive.google.com/open?id=0B6suAOyAEfoOMWRvVmJWTzItS0E
EPE3 6.0.1 Marshmallow BL and Modem
https://drive.google.com/open?id=0B6suAOyAEfoOZFQ3SkVnWmVOdGs
DOK2 5.1 Lollipop BL and CP
https://drive.google.com/open?id=0B6suAOyAEfoOSUtudWZCWTNncHM
Quickie Instructions I have on a notepad file along with these files on my SD Card for reference.
Found it on some forum or site that was real helpful!
INSTALLING THESE FILES
1. Load phone in download mode. (Vol down+Home+Power)
2. Open ODIN3 on your computer. (Make sure the Samsung drivers are installed, you can install KIES to get these.)
3. Load the bootloader file in BL.
3a. Load the modem file in CP.
4. Hit the start button, and let the files flash.
5. If there are no error messages in the log portion of ODIN3, then you have successfully flashed and upgraded to the bootloader/modem.
Note: You can check this in your "Settings - About Phone" section.
Here's a screenie from my CM 12.1 flashed phone.
Click to expand...
Click to collapse
Unfortunetly for me, doesn't work on T3.

I put my phone in a bootloop.

Yesterday I tried rooting my Samsung Galaxy S7 Edge using Odin CF autoroot with no experience at all. I did something wrong. When it wouldn't work at first and kept giving an error and "FAIL!" message I tried checking for the correct firmware so I googled my model number and found the one for my phone and downloaded it. I'm not sure what I did but my phone is in a bootloop whenever I turn it on and I can't go to recover mode, only download mode. How do I reinstall the correct firmware?
Please help me fix this. Hopefully I won't have to go to a store for repair...

Well u simply
1) go to sammobile
2) find ur model
3) download the latest firmware
4) extract the firmware
5) put the phone in download mode
6) open odin
7) connect phone
8) upload the extracted files to odin into there respective places
9) flash
the phone will automatically reboot after flashing is complete
NOTE: just be sure to flash model specific firmware.

flash stock rom with odin or use samsung software to fully restore original firmware

Alecia1212 said:
Well u simply
1) go to sammobile
2) find ur model
3) download the latest firmware
4) extract the firmware
5) put the phone in download mode
6) open odin
7) connect phone
8) upload the extracted files to odin into there respective places
9) flash
the phone will automatically reboot after flashing is complete
NOTE: just be sure to flash model specific firmware.
Click to expand...
Click to collapse
If I find the correct firmware will it just overwrite or must I remove the current one? I honestly have no idea how this works.

I had this problem once, you need to flash them Individually, one checkbox at per flash. The way to root ur phone should be magisk manager or supersu. First off you need twrp which is 3.2.1.1 that auto root thing in Odin doesn't work. Some custom rooms already have options for root so if ur a beginner it's best u try them.
---------- Post added at 11:09 PM ---------- Previous post was at 11:02 PM ----------
https://dl.twrp.me/hero2lte/twrp-3.2.1-1-hero2lte.img.tar.html
Flash this as ap it's a custom recovery that everyone uses here. Then use the keys power home vol down to force restart ur phone. Then power home vol up the moment it restarts to reach recovery. wipe everything then Flash a custom rom from the forums. I understand ur frustration that the phone has no way to turn off at all

When I try to flash the twrp-3.2.1-1-hero2lte.img.tar.md5 file Odin stops responding.

Don't flash Md5.
Flash the .tar file.

pingufanpoy said:
Don't flash Md5.
Flash the .tar file.
Click to expand...
Click to collapse
The non md5 download only has a recovery.img file which won't go into AP.

u flash it as a tar file not as the img file, you cant use .img files in odin
do not extract the img just flash the tar.
Btw in Odin the autoreboot and freset time don't matter they don't do anything because if you still don't have an os or recovery it will still send u to dl mode.
once u flash twrp it will automatically boot into recovery no need to hold keys. Then wipe ur phone and install either batman rom (an s8 port with Bixby) or superman rom (stock s7 edge firmware) both have customized installers that allow u to choose addons features and root.
U install custom roms by going to install button then selecting the zip. Also 2 main kernels that most people use are tgp kernel and superstock kernel.

dude, you're so smart, dont know what you're doing and you flash something without any knowledge and preparation...
that situation is fully on you

https://prnt.sc/iyosdg
I can't flash this.
https://prnt.sc/iyot25
Or this.

recovery.img comes in a .zip and nothing else is in it. If I don't extract it how do I flash it?? The .zip doesn't show up as an option in AP.

Deksastara said:
recovery.img comes in a .zip and nothing else is in it. If I don't extract it how do I flash it?? The .zip doesn't show up as an option in AP.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Now Odin isn't detecting my phone in download mode. When it's in the bootloop Odin adds and removes it repeatedly.

Deksastara said:
Now Odin isn't detecting my phone in download mode. When it's in the bootloop Odin adds and removes it repeatedly.
Click to expand...
Click to collapse
if u flashed it with a green pass, u should be able to boot into custom recovery
power home and volume down for force restart
when phone shows s7 logo, power home vol up to reach recovery

It hasn't flashed. It stays on file analysis for hours.

It does that if your phone is disconnected and reconnected. Download the official Samsung USB drivers.
https://samsung-usb-driver-for-mobile-phones.en.lo4d.com/download

http://prntscr.com/iz109e
I've installed the driver. How long should this take? It isn't saying disconnected.

Flashing a custom recovery should only take 10 seconds. Custom rom 10 minutes. What is the model of your phone check the back of ur phone.

pingufanpoy said:
Flashing a custom recovery should only take 10 seconds. Custom rom 10 minutes. What is the model of your phone check the back of ur phone.
Click to expand...
Click to collapse
G935P.
It stays on "File analysis." Does this mean I don't have the right driver? If so, how do I find it? I downloaded the one from the link you shared.