sorry my bad language.
I am new in this forum,
how full root samsung tab 4 7 inch and remove twrp recovery to restore the original?
My tab samsung galaxy tab 4 7 inch SM-T231.
how to restore like-new from the factory.
help me.. :crying:
:angel::angel::angel:
orlene said:
sorry my bad language.
I am new in this forum,
how full root samsung tab 4 7 inch and remove twrp recovery to restore the original?
My tab samsung galaxy tab 4 7 inch SM-T231.
how to restore like-new from the factory.
help me.. :crying:
:angel::angel::angel:
Click to expand...
Click to collapse
Hey, you are on the wrong thread and post. BUT, it is OK. If you want to restore everything to original, then download SAMSUNG SMART SWITCH on your Windows Computer. After downloading it, then go to the app and connect your device to the PC (turn off your device first!) then press Emergency Recovery and after that button, you press Device Initialization then you have to put the Model Number in and also the Serial Number. After that, the Smart Switch app will tell you to go to Download Mode. You do that by pressing Power + Vol Down + Home. Hope I helped! If the Smart Switch says your Android version is too old, then try SAMSUNG KIES!!!
Peace Out and give thanks to my Primary account at this link: http://forum.xda-developers.com/member.php?u=7055660
You can use Odin with stock ROM
Enter download mode first then flash
I have a SM-P585Y which is essentally the T585 with a S-Pen I tried this TWRP and now its stuck in a boot loop, having trouble finding a ROM to reload the Tablet, is this something being worked on? (the TWRP for this)
Related
Getting "System software not authorized by Verizon Wireless has been found on your phone. Please turn off your phone and go to the nearest Verizon Wireless store for help."
Any ideas?
Thank you
Go into Recovery mode (Vol Up + Home Button + Power Button) and Factory reset Data & Wipe Cache Partition...
moin786 said:
Go into Recovery mode (Vol Up + Home Button + Power Button) and Factory reset Data & Wipe Cache Partition...
Click to expand...
Click to collapse
Still get the same thing. It starts to boot to recovery then says something that fails then goes to the screen I have posted previous.
This is what first loads (pretty quick - had to reboot about 10 times to get it)
recovery booting...
SYS REV CHECK FAIL : no version
Secure : Secure Version Failure (recovery.img)
Set Warranty Bit : Recovery
norem0rz said:
Still get the same thing. It starts to boot to recovery then says something that fails then goes to the screen I have posted previous.
This is what first loads (pretty quick - had to reboot about 10 times to get it)
recovery booting...
SYS REV CHECK FAIL : no version
Secure : Secure Version Failure (recovery.img)
Set Warranty Bit : Recovery
Click to expand...
Click to collapse
What did you do prior to this? It looks like you flashed a custom recovery but Knox is terminating the boot process.
Have you tried to odin back to stock?
Sent from my Galaxy Note 3 ?
Trying to use Odin - downloading a stock ROM now.
No. You must get into download/Odin mode by pressing volume down + home + power simultaneously, then launch Odin, then connect phone to computer.
Sent from my SM-N900V using Tapatalk
norem0rz said:
yes, I was using clockwork and did something wrong...
doesn't the phone need to boot up before I can use Odin?
Click to expand...
Click to collapse
If you have a Verizon retail version of the Note 3, you can not use Clockworkmod recovery. Because your bootloader is locked. You can only use Hashcode's Safestrap (in the Development section).
cam30era said:
If you have a Verizon retail version of the Note 3, you can not use Clockworkmod recovery. Because your bootloader is locked. You can only use Hashcode's Safestrap (in the Development section).
Click to expand...
Click to collapse
+1
Which means you must be rooted first, then install Safestrap, which is a modified TWRP recovery. You can thank Verizon for that bullsh!t
Sent from my SM-N900V using Tapatalk
Thank you all - using Odin with this link http://forum.xda-developers.com/showthread.php?t=2483380
Got me back up and running.
Flash PIT - this will fix it
You need to flash the PIT with ODIN, latest version (3.09, I believe). Google for a download mirror that hosts the PIT for whichever type of note 3 you have, then flash it with odin (should work while in the invalid software screen). Then, if it doesn't reboot, just remove the battery and unplug that sucka. When it reboots, it should go back to download mode or just regular bootup. I recommend setting up adb, which makes it much easier to put the phone into whatever mode you desire with a simple dos command.
got out of it
this happened to me last night, I went into Odin mode "home, volume down, power button" instead of selecting odin mode from that menu I selected "reboot phone" (or something to that effect) My note 3 restarted......PHEW...... hope this helps someone
enable android recovery mode
SM-N90OV
ok so I once got to the point to where I could not but factory reset my phone and so I did settings > backup and restore > factory reset > YES I'M SURE!!! then my phone when into recovery mode as it should normally only to tell me that it could not enter recovery. Verizon's fault and now I cant access my recovery mode. is there a way to get back into it so I can finally flash a new rom. oh I had figured out how to get out of the boot loop thing by entering download mode and canceling. but it would be nice to be able to mess with this beast of a phone. please help me. I don't want to do something I wasn't supposed to. im not sure want to do with klms agent deals with knox right?
Em also one of the victim
hi
i am rooted (de la Vega ) safestrap installed using Jelly beans 6 & stock Rom as well. i don't know how but i am not being able to get in the recovery to format the device.
Getting "System software not authorized by Verizon Wireless has been found on your phone. Please turn off your phone and go to the nearest Verizon Wireless store for help."
What i do is getting into the download mode and only pressing Volume down to continue boot and Viola my phone restarts every time, but the thing which is pinching me is i can't able to format the phone.. Help required please.
xaneey said:
hi
i am rooted (de la Vega ) safestrap installed using Jelly beans 6 & stock Rom as well. i don't know how but i am not being able to get in the recovery to format the device.
Getting "System software not authorized by Verizon Wireless has been found on your phone. Please turn off your phone and go to the nearest Verizon Wireless store for help."
What i do is getting into the download mode and only pressing Volume down to continue boot and Viola my phone restarts every time, but the thing which is pinching me is i can't able to format the phone.. Help required please.
Click to expand...
Click to collapse
look at page one towards the bottom, the OP posted how to fix your problem
Solution
HI all
What worked for me is just ODIN
MI9 t0 MJE
and this is the beauty of ANDROID really happy to get it back..
Downloaded MJE for N900V http://www.sammobile.com/firmwares/3/?download=23535
Root through this in my case Vroot worked Kingo didn't work for me http://forum.xda-developers.com/showthread.php?t=2528707
Thn safe strap and all done
you guys and gals rock
saved my bacon ,was a little confusing to my novice self but downloaded odin to pc and ran it,downloaded clean vzw file and pit file ,plugged phone into pc and drivers loaded then ran odin and followed the steps.
Thank you very very much
hello guys>
please help me in this
I've downloaded 2 files which are: - download booster (ported from s5)
- s5 contacts and dialer
I've flashed them at the same time at CWM recovery and my phone won't reboot again
it keeps showing that samsung starting screen and vibrates twice!!!
I dunno what to do. I've removed the battery and put it back again but no change!
please guys tell me what to do
Restore your backup.
Lennyz1988 said:
Restore your backup.
Click to expand...
Click to collapse
can u please tell me how?
now I can't go to recovery mode. when I want to go to recovery mode it skips it!!!
but I can go to download mode...
I'm really pissed off
Just flash a recovery again with Odin. That's should probably work.
Hello guys I need your help plz for my new grand 2 phone
Phone model: Galaxy grand 2 sm-g7102.
Android: kitkat 4.4.2 ,rooted without using custom recovery.
I have rooted my grand 2 mobile using kingroot app without using any custom recovery
and it worked fine.
the problem started when I have installed Gltools 1.0.7 and give it root permission then my mobile screen turned off and mobile didn't respond.
then i do the following press volume up+home+power buttons and the mobile restart in recovery mod i press the first option
reboot system now and then screen stuck at first boot screen .
I wiped my data ,cache and factory reset and no benefit of that .
what i have to do plz help me
abbody said:
Hello guys I need your help plz for my new grand 2 phone
Phone model: Galaxy grand 2 sm-g7102.
Android: kitkat 4.4.2 ,rooted without using custom recovery.
I have rooted my grand 2 mobile using kingroot app without using any custom recovery
and it worked fine.
the problem started when I have installed Gltools 1.0.7 and give it root permission then my mobile screen turned off and mobile didn't respond.
then i do the following press volume up+home+power buttons and the mobile restart in recovery mod i press the first option
reboot system now and then screen stuck at first boot screen .
I wiped my data ,cache and factory reset and no benefit of that .
what i have to do plz help me
Click to expand...
Click to collapse
flash stock firmware.
go to sammobile.com
Search for grand 2 firmware
then download it.
The firmware must base on your country.
after that flash using odin.
after complete. Remove battery then insert it again.
go to recovery
wipe everything
then reboot system
wait about 10 minutes
congrats your phone is normal again
Solution to your problem:
You will need to download the NK1 version of kitkat 4.4.2 stock firmware.
1) install samsung kies or samsung usb drivers so that your PC will detect your phone.
2) Switchoff your phone first and put it in download mode by pressing volume down and home button and power button at the same time.
3) connect your phone to your PC through the usb cable and start odin. (The com port turns blue in odin which means phone is detected).
4) In odin, check the "Nand erase all" in the checkbox and then click on "AP" buttion and select the "G7102DDUBNK1_G7102ODDBNK1_G7102DDUBNK1_HOME.tar" file.
5) Click the start button and wait for 5 mins till the OS is installed.
6) After installation, on your phone it might show 'memory damaged' and 'erase memory'. Don't worry, nothing is damaged or serious, just click to reset and everything will be fine.
7) Done!
I have provided the NK1 version link to you from my google drive account:
https://drive.google.com/folderview...03NF9WUzJLTHVSVnkzWWN5aFVQSzVOS28&usp=sharing
(Please hit thanks if I helped you)
Thanks guys
Problem solved and it is working now :fingers-crossed:
I have this same problem and I downloaded the above file and followed the instructions accordingly, after flashing it is still stuck at REBOOTING TO RECOVERY for about one hour now.I guessing it might be related to hardware.
mbond said:
I have this same problem and I downloaded the above file and followed the instructions accordingly, after flashing it is still stuck at REBOOTING TO RECOVERY for about one hour now.I guessing it might be related to hardware.
Click to expand...
Click to collapse
Which firmware were you on before the first boot loop? Flash that firmware, and don't forget to pull the battery afterwards.
(Don't hit thanks, hit the phone on a pillow/bed of you think its hardware related).
abbody said:
Hello guys I need your help plz for my new grand 2 phone
Phone model: Galaxy grand 2 sm-g7102.
Android: kitkat 4.4.2 ,rooted without using custom recovery.
I have rooted my grand 2 mobile using kingroot app without using any custom recovery
and it worked fine.
the problem started when I have installed Gltools 1.0.7 and give it root permission then my mobile screen turned off and mobile didn't respond.
then i do the following press volume up+home+power buttons and the mobile restart in recovery mod i press the first option
reboot system now and then screen stuck at first boot screen .
I wiped my data ,cache and factory reset and no benefit of that .
what i have to do plz help me
Click to expand...
Click to collapse
For future!
Just flash compatible kernel
Press THANKZ
Shane_Picardo said:
Solution to your problem:
You will need to download the NK1 version of kitkat 4.4.2 stock firmware.
1) install samsung kies or samsung usb drivers so that your PC will detect your phone.
2) Switchoff your phone first and put it in download mode by pressing volume down and home button and power button at the same time.
3) connect your phone to your PC through the usb cable and start odin. (The com port turns blue in odin which means phone is detected).
4) In odin, check the "Nand erase all" in the checkbox and then click on "AP" buttion and select the "G7102DDUBNK1_G7102ODDBNK1_G7102DDUBNK1_HOME.tar" file.
5) Click the start button and wait for 5 mins till the OS is installed.
6) After installation, on your phone it might show 'memory damaged' and 'erase memory'. Don't worry, nothing is damaged or serious, just click to reset and everything will be fine.
7) Done!
I have provided the NK1 version link to you from my google drive account:
https://drive.google.com/folderview...03NF9WUzJLTHVSVnkzWWN5aFVQSzVOS28&usp=sharing
(Please hit thanks if I helped you)
Click to expand...
Click to collapse
I have same problem, please share the download link.
i have a samsung galaxy tab 4 and my friend downloaded a program called teamwinrecoveryproject and now my tablet just turns on and hoes to a menu that says twrp...what do i do i cant hard reset it and it doesnt connect to my computer
XDA Visitor said:
i have a samsung galaxy tab 4 and my friend downloaded a program called teamwinrecoveryproject and now my tablet just turns on and hoes to a menu that says twrp...what do i do i cant hard reset it and it doesnt connect to my computer
Click to expand...
Click to collapse
Hello, and thank you for using XDA Assist!
Looks like TWRP was installed to the boot partition. If you go to the reboot menu and select recovery, does it reboot to stock recovery (usually the Android logo laying down with the front panel open)? What happens if you select Reboot > System? Does it boot normally, or just go back into TWRP?
At any rate, I am connecting this thread to the forum your device experts can be found:
> Samsung Galaxy Tab 4 > Galaxy Tab 4 Q&A, Help & Troubleshooting
Please note, to respond to replies, you will need to have registered for an XDA account.
Hope this helps, and good luck!
I believe my phone is Hard-Bricked.
It is a Samsung Galaxy Grand Prime sm-G530a.
Its AT&T.
It was running 5.1.1 Lollipop.
Basically I opened developer options , Ticked OEM Unlock, An enabled USB Debugging.
Then I used KingRoot APK to Root Phone.
Everything was successful I used RootChecker from Playstore to check root. It was Rooted.
Then I Installed TWRP Manager from Play Store, and here's where I messed up.
It asked me to locate my device, An I accidentally installed Galaxy Grand Prime Duo Recovery.
So the phone restarted an all I get is Blank Screen and it Vibrates every 1-3 Seconds.
The computer wont recognize it and I have no clue what to do.
So please anyone on here with more smarts then me please lend a Helping hand.
I don't mind donating after problem is resolved cuz its a cheaper option than buying all new device,
P.S.
There are three stages to bricked correct,
1. Bricked wont Do Anythin!
2. Hard Bricked Messed up System Partition, Blah Blah!
3. Soft Bricked simply Install new OS or what have you!
I just recently flashed a recovery instead of a boot img and had some issues I swung hard at and succeeded. I know how it feels to be there man. Hope to help here, can you boot into download mode??
Vol Up, Menu, Pwr Button? This way you can flash stock 5.1.1 using Odin...
Try booting to download mode. If is won't work try the jit cable method
Sent from my SM-G530H using XDA-Developers mobile app
re
there is another way aswell.. if he can go to recovery then clear cache three times then clear factory 3 times and take out battery. now here's the hard step (a little) : hold the download mode combo keys and put in the battery
and the computer will recognize it.
carefully follow steps and i think it will work.