i have a samsung galaxy tab 4 and my friend downloaded a program called teamwinrecoveryproject and now my tablet just turns on and hoes to a menu that says twrp...what do i do i cant hard reset it and it doesnt connect to my computer
XDA Visitor said:
i have a samsung galaxy tab 4 and my friend downloaded a program called teamwinrecoveryproject and now my tablet just turns on and hoes to a menu that says twrp...what do i do i cant hard reset it and it doesnt connect to my computer
Click to expand...
Click to collapse
Hello, and thank you for using XDA Assist!
Looks like TWRP was installed to the boot partition. If you go to the reboot menu and select recovery, does it reboot to stock recovery (usually the Android logo laying down with the front panel open)? What happens if you select Reboot > System? Does it boot normally, or just go back into TWRP?
At any rate, I am connecting this thread to the forum your device experts can be found:
> Samsung Galaxy Tab 4 > Galaxy Tab 4 Q&A, Help & Troubleshooting
Please note, to respond to replies, you will need to have registered for an XDA account.
Hope this helps, and good luck!
Related
Hi
Please help me to install Android 3.0 on my 10.1v tab.
I have selected wipe data from clockworkmod and when I reboot my tab the tab don't start.
On the screen apper only the start logo" Samsung GALAXY Tab 10.1v"
Can I install the software with odin? like on Galaxy S
Again Please help
Thanks
My post, Post #9
http://forum.xda-developers.com/showthread.php?p=15373865#post15373865,
OR,
http://droidbasement.com/db-blog/?p=2035
hy
when I ry to flash with Odin on the tablen apper this message:
WritePartition: Fail to NvStorMgrFileWrite![err:0xa]
DownloadPartition_odin: Fail to WritePartition![err:0xa]
Tegra_Nand_Write: Fail to DownloadPartition_odin[err:0xa]
Please tell me what to do to resolve this problem.
Thanks
You are in recovery mode?
Turn of tab, turn it on and hold volume down, you see 2 yellow pictograms, select the digging droid and push volume up. Then your in odin mode.
Then read the post of the stock rom on this forum howto do it
Sent from my GT-P7500 using XDA App
Problem solved
Thanks
Sent from my GT-P7500 using XDA Premium App
Hello XDA.
First of all: Yes, This is my first post.
Second of all: Yes, I did Google this problem and havent found anything that works.
I installed Cyanogen Mod 9 on my Galaxy Tab2. After it had been installed i Rebooted it. It starts and shows the "Galaxy Tab 2 7.0" Screen and The Cyanogen Robot shows up. After that nothing happens. When i try to turn it off, it just reboots and the same thing happends. I cant enter Recovery mode or Download mode, And the only way to turn it off is by letting the Power Run out. I have no idea on how to fix this, So you might help. What i want to do:
1. Return to stock ROM
2. Be happy that i didnt brick my Tab 2.
3.???????
4.Profit.
If you need mode info/Pics/video i can Write/Capture/Record it for you.
Hope you guys can help!
Johan_hallgren said:
Hello XDA.
First of all: Yes, This is my first post.
Second of all: Yes, I did Google this problem and havent found anything that works.
I installed Cyanogen Mod 9 on my Galaxy Tab2. After it had been installed i Rebooted it. It starts and shows the "Galaxy Tab 2 7.0" Screen and The Cyanogen Robot shows up. After that nothing happens. When i try to turn it off, it just reboots and the same thing happends. I cant enter Recovery mode or Download mode, And the only way to turn it off is by letting the Power Run out. I have no idea on how to fix this, So you might help. What i want to do:
1. Return to stock ROM
2. Be happy that i didnt brick my Tab 2.
3.???????
4.Profit.
If you need mode info/Pics/video i can Write/Capture/Record it for you.
Hope you guys can help!
Click to expand...
Click to collapse
Same thing happened to me.. Boot into recovery (power/volume up), do a full wipe, and try re-flashing..
I cant enter Recovery, thats the problem.
Sent from my LT15i using xda app-developers app
Johan_hallgren said:
I cant enter Recovery, thats the problem.
Sent from my LT15i using xda app-developers app
Click to expand...
Click to collapse
Stupid me.. You did say that.. My apologies.. Hope you get it sorted.
Does your PC recognize the tab?
My PC won't recognize the Tab. Its working now thanks to my mom, she pressed all buttons she could find and BOOM. Clockwork recovery.
Sent from my GT-P3110 using xda app-developers app
Pressed all the buttons she could find??? There's only 2!
Thank god for mums though ay!!
sent from my Samsung Galaxy SIII using Tapatalk
Well first she started the tab, whitout knowing what Cyanogen was. So she yelled at me "JOOOOHAAAN WHEN I START THE TAB THERE'S A EVIL ROBOT THERE!!!" I replied "Yes, its a evil robot."
Then I want upstairs to google some more about this. 5 minutes later she says "JOOOOHAAAAN THERES A GOOD ROBOT HERE!!!", So I ran downstairs and she had pressed all the buttons in a strange way so she had entered Clockwork mod . Then I just wiped everything and restored from backup.
Its a good robot, for sure.
Sent from my GT-P3110 using xda app-developers app
Hello XDA
First off let me tell you what im running.
Nexus 4 running Cyanogenmod 11 with USB debugging turned off.
So my I bought this phone used and allowed my brother to install a custom ROM on it. I also gave him the OK when he asked me if he can encrypt the phone. (No problem, what can go wrong right?) Well it turns out nothing did go wrong but the only thing is when I went to go change the password I only changed the SCREEN LOCK password not the encryption password thinking they were the same. When i went to go boot up my phone today it asked for the encryption password but wont accept the lock password. Went to ask my brother for the password and he said he forgot because he had already told it to me.
Now im stuck with a possible broken phone =[
Steps I have tired: after painstaking hours on google and XDA looking for an answer
- I have tired to download TWRP but cant install the zip file because i cant get the fastboot to show USB FASTBOOT
- I have tired recovery mode with ClockworkMod Recovery v6.0.4.7 and tired the cwipe data/ factory reset with no luck
Can someone please guide me in the right direction on what I should do to fix my phone?
Many Thanks!!
Flash the factory image in fastboot. It'll wipe the device and return it to like new. If you don't have fastboot Google 15 second adb install xda
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
Flash the factory image in fastboot. It'll wipe the device and return it to like new. If you don't have fastboot Google 15 second adb install xda
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
I installed the 15 secs ADB but when i run the program, it quickly shows a DOS screen then auto closes. Would this still work with USB debugging turned off on my android?
EDIT
the phone doesnt even show up on my device manager, after typing "adb devices" no devices show up. I have tired to manually install the drivers but it wont show up on device manager
You can just factory reset the phone to remove encryption. Boot the phone into recovery mode. When you see the "no command" screen hol vol-up and tap power, then you can wipe the device.
Hello guys I need your help plz for my new grand 2 phone
Phone model: Galaxy grand 2 sm-g7102.
Android: kitkat 4.4.2 ,rooted without using custom recovery.
I have rooted my grand 2 mobile using kingroot app without using any custom recovery
and it worked fine.
the problem started when I have installed Gltools 1.0.7 and give it root permission then my mobile screen turned off and mobile didn't respond.
then i do the following press volume up+home+power buttons and the mobile restart in recovery mod i press the first option
reboot system now and then screen stuck at first boot screen .
I wiped my data ,cache and factory reset and no benefit of that .
what i have to do plz help me
abbody said:
Hello guys I need your help plz for my new grand 2 phone
Phone model: Galaxy grand 2 sm-g7102.
Android: kitkat 4.4.2 ,rooted without using custom recovery.
I have rooted my grand 2 mobile using kingroot app without using any custom recovery
and it worked fine.
the problem started when I have installed Gltools 1.0.7 and give it root permission then my mobile screen turned off and mobile didn't respond.
then i do the following press volume up+home+power buttons and the mobile restart in recovery mod i press the first option
reboot system now and then screen stuck at first boot screen .
I wiped my data ,cache and factory reset and no benefit of that .
what i have to do plz help me
Click to expand...
Click to collapse
flash stock firmware.
go to sammobile.com
Search for grand 2 firmware
then download it.
The firmware must base on your country.
after that flash using odin.
after complete. Remove battery then insert it again.
go to recovery
wipe everything
then reboot system
wait about 10 minutes
congrats your phone is normal again
Solution to your problem:
You will need to download the NK1 version of kitkat 4.4.2 stock firmware.
1) install samsung kies or samsung usb drivers so that your PC will detect your phone.
2) Switchoff your phone first and put it in download mode by pressing volume down and home button and power button at the same time.
3) connect your phone to your PC through the usb cable and start odin. (The com port turns blue in odin which means phone is detected).
4) In odin, check the "Nand erase all" in the checkbox and then click on "AP" buttion and select the "G7102DDUBNK1_G7102ODDBNK1_G7102DDUBNK1_HOME.tar" file.
5) Click the start button and wait for 5 mins till the OS is installed.
6) After installation, on your phone it might show 'memory damaged' and 'erase memory'. Don't worry, nothing is damaged or serious, just click to reset and everything will be fine.
7) Done!
I have provided the NK1 version link to you from my google drive account:
https://drive.google.com/folderview...03NF9WUzJLTHVSVnkzWWN5aFVQSzVOS28&usp=sharing
(Please hit thanks if I helped you)
Thanks guys
Problem solved and it is working now :fingers-crossed:
I have this same problem and I downloaded the above file and followed the instructions accordingly, after flashing it is still stuck at REBOOTING TO RECOVERY for about one hour now.I guessing it might be related to hardware.
mbond said:
I have this same problem and I downloaded the above file and followed the instructions accordingly, after flashing it is still stuck at REBOOTING TO RECOVERY for about one hour now.I guessing it might be related to hardware.
Click to expand...
Click to collapse
Which firmware were you on before the first boot loop? Flash that firmware, and don't forget to pull the battery afterwards.
(Don't hit thanks, hit the phone on a pillow/bed of you think its hardware related).
abbody said:
Hello guys I need your help plz for my new grand 2 phone
Phone model: Galaxy grand 2 sm-g7102.
Android: kitkat 4.4.2 ,rooted without using custom recovery.
I have rooted my grand 2 mobile using kingroot app without using any custom recovery
and it worked fine.
the problem started when I have installed Gltools 1.0.7 and give it root permission then my mobile screen turned off and mobile didn't respond.
then i do the following press volume up+home+power buttons and the mobile restart in recovery mod i press the first option
reboot system now and then screen stuck at first boot screen .
I wiped my data ,cache and factory reset and no benefit of that .
what i have to do plz help me
Click to expand...
Click to collapse
For future!
Just flash compatible kernel
Press THANKZ
Shane_Picardo said:
Solution to your problem:
You will need to download the NK1 version of kitkat 4.4.2 stock firmware.
1) install samsung kies or samsung usb drivers so that your PC will detect your phone.
2) Switchoff your phone first and put it in download mode by pressing volume down and home button and power button at the same time.
3) connect your phone to your PC through the usb cable and start odin. (The com port turns blue in odin which means phone is detected).
4) In odin, check the "Nand erase all" in the checkbox and then click on "AP" buttion and select the "G7102DDUBNK1_G7102ODDBNK1_G7102DDUBNK1_HOME.tar" file.
5) Click the start button and wait for 5 mins till the OS is installed.
6) After installation, on your phone it might show 'memory damaged' and 'erase memory'. Don't worry, nothing is damaged or serious, just click to reset and everything will be fine.
7) Done!
I have provided the NK1 version link to you from my google drive account:
https://drive.google.com/folderview...03NF9WUzJLTHVSVnkzWWN5aFVQSzVOS28&usp=sharing
(Please hit thanks if I helped you)
Click to expand...
Click to collapse
I have same problem, please share the download link.
sorry my bad language.
I am new in this forum,
how full root samsung tab 4 7 inch and remove twrp recovery to restore the original?
My tab samsung galaxy tab 4 7 inch SM-T231.
how to restore like-new from the factory.
help me.. :crying:
:angel::angel::angel:
orlene said:
sorry my bad language.
I am new in this forum,
how full root samsung tab 4 7 inch and remove twrp recovery to restore the original?
My tab samsung galaxy tab 4 7 inch SM-T231.
how to restore like-new from the factory.
help me.. :crying:
:angel::angel::angel:
Click to expand...
Click to collapse
Hey, you are on the wrong thread and post. BUT, it is OK. If you want to restore everything to original, then download SAMSUNG SMART SWITCH on your Windows Computer. After downloading it, then go to the app and connect your device to the PC (turn off your device first!) then press Emergency Recovery and after that button, you press Device Initialization then you have to put the Model Number in and also the Serial Number. After that, the Smart Switch app will tell you to go to Download Mode. You do that by pressing Power + Vol Down + Home. Hope I helped! If the Smart Switch says your Android version is too old, then try SAMSUNG KIES!!!
Peace Out and give thanks to my Primary account at this link: http://forum.xda-developers.com/member.php?u=7055660
You can use Odin with stock ROM
Enter download mode first then flash
I have a SM-P585Y which is essentally the T585 with a S-Pen I tried this TWRP and now its stuck in a boot loop, having trouble finding a ROM to reload the Tablet, is this something being worked on? (the TWRP for this)