If you are on MIUI, go to CIT mode ( Engineering mode ), tap on check version info, scroll down and check for the front camera, a sensor should be listed next to it/ below it.
Share it here, mine is S5K5E8, which unfortunately has been implemented in the new August batch, therefore no kernel sources for this sensor yet.
Why is it bad? I'm getting kate device and it's new so I suppose they used also this sensor.
How do we check if were on cm
Related
My Nexus 4 went thru some water damage 2 weeks back. I had to replace the power IC, the rear camera lens and the display to get it working. The flash isn't working anymore but I can live with that. However, I've been having issues using Google Camera's Photosphere and Panaroma modes. Every time I switch from Video / Camera mode / Lens Blur mode to Photosphere / Panaroma mode, the app just freezes. Attaching screenshots along with the post. Closing and restarting the app brings it back to the same limbo state and I have to force kill it every time to get back to Camera mode.
Is this an issue with the software or is the changing of lens causing this issue? I didn't get the repairing done at an LG store as it was very expensive and would've taken almost a week to get the phone started.
I'm currently on CyanogenMod 11. Please help. Thanks!
maybe dead gyroscope sensor ?
RolF2 said:
maybe dead gyroscope sensor ?
Click to expand...
Click to collapse
Seems so. Tried calibrating the Accelerometer with SensorTester app but it never finishes calibrating. Guess the sensors went bad due to water damage. Any idea how much would it cost to replace just the sensors?
where is placed Gyro + Accelerometer you can find here : https://www.ifixit.com/Teardown/Nexus+4+Teardown/11781
step 17, MPU-6050
Hello.
I have thought that Le Pro 3 has a hall sensor. If it does. Mine is not working. I have x720 phone. with 19s version. I don't think is original. It has Google Store and not a single chinese sign or bloatware. I think is a vendor rom.
I tried with a lot of magnets and and there is no hall sensor. I ordered a flip case that was supposed to work with that sensor and open/close phone when you open the cover.
I checked the Accessibility/hall sensor option to On but nothing works.
Did anyone checked his phone for hall sensor?
Thanks
Lastest for x720 is 18s...
Mine eui version is 5.8.019s (Stable)
I testet on my device and there is a Hall sensor and its working well.
I am on the s18 on x720
You have test it with a magnet?
I don't know if mine is not working hardware or maybe is the vendor ROM to blame.
I have installed Sensor Test and at the magnetic field it says uncalibrated. I don't know how to fix it
When I aproach a magnet to the phone in sensor test it detect it and it show it works. So I think is the software to blame.
I tried again with cydras rom. And somehow it works sometime. When I try with a magnet, close to the buttons it works but only sometimes. Not allways.
I received the original flip cover and it works. It must have a special magnet or something.
The phone works and close screen when I flip it.
hi , everyone .
i have problems with my Le Pro 3 camera
my back camera is can't open (black screen)
and i'm logging --> i found this log
--> no camera id found
.
anyone have solutions ?
.
thanks :good:
99% a hardware issue. Either the camera module stopped working or a cable is loose. 1% it's a software issue. If you're on a ROM, go back to stock and see if it works.
I've heard of this behaviour with the fingerprint scanner on the x720. It always turns out to be a hardware issue (the scanner stops working). In any case, the phone is easy enough to open up. The only struggle is getting the screen off without breaking it. http://www.myfixguide.com/manual/leeco-le-pro-3-teardown/
You can find replacements on Aliexpress but IDK how good they'll be, and if they're indeed Sony IMX sensors (they could be Omnivision ones).
Hi all, flashed S7 EDGE on U which is 10 the loader, and ceased at once to work that is the camera ( camera failed ) and flashlight is also not working. Put the camera even new and still not working, blinking flashlight works when uvedomlenie.
Not sure what uvedomlenie might be and when you say you [put the camera even new and still not working], I'm assuming that means you installed a new camera? If that is the case it might be a good idea to recheck connections. As I recall, the flex cable for the camera snaps in beneath the motherboard and may be prone to come loose if not careful. I don't think the firmware version flashed has anything to do with camera app issues. It sounds like hardware, and that would be the actual camera.
Hi!
Maybe hw-error, maybe not, in any cases i ordered the replacement piece today. (my phone is the ZB602KL, X00TD, 6GB RAM version, without NFC, WW-type, BL open unofficial way, rooted)
My device lost the front camera. The hw-analisys software doesn't shows it. (aida64, device info HW).
If I try to change the active camera module in the camera app from back module to front module, the device just alternates images between the two rear cameras.
By the way i tried to return back to stock-rom, changing kernels back and forth, changing roms on the device, clear app data, another cam-apps (rog phone camera, gcam, camera fv-5), but nothing. With opened or closed BL, and stock or custom roms, or with or without root-access (and permutations) still nothing.
Any opinion? It is hw-error, or kernel-error, or something mystical-error?
Thanks in advance!