CSC Selection for SM-N930F/FD devices
What is this for?
CSC stands for Country Specific Code, so every single country (and even different providers in one country) have different codes, for csc features, wallpapers, sounds etc. So it is quit important to have the right csc file on your phone for your provider (so you can have all features which comes with your provider (like wifi calling)).
You may ask yourself now, where can this be flashed on? Basically on every stock based rom, as well as on stock roms (who are rooted of course). So: root and a recovery (custom) are required!
Your current country is not listed below? Send me your stock csc file from sammobile.com (SM-N930F variant) and I will add it!
Guide how to change csc inside Multi-CSC
NOTE TO ALL DEVS: You are free to grab any csc you want from this zip, as long as proper credits are given and a link to this thread exist in your OP.
Features:
- Following additions have been made to all csc files:
- nothing added till now
- Following csc codes/contries are supported until now:
Code:
"ATT", "US ATT branded"
"BRI", "Taiwan unbranded"
"BTU", "United Kingdom unbranded"
"CHC", "China unbranded"
"DBT", "Europe Multi-CSC. Contains: ATO, AUT, BGL, DBT, ETL, EUR, ITV, LUX, NEE, ORX, PHE, PHN, ROM, SEB, SEE, TPH, XEF, XEH, XEO, XEU"
"HTS", "Sweden branded"
"ILO", "Israel Multi-CSC Contains: CEL, ILO, PCL, PTR"
"INS", "India Multi-CSC Contains: BGN, INS, INU, NPL, SLI, SLK"
"IUS", "Mexico branded"
"KTC", "Korea KT Corporation branded"
"ORO", "Romania Orange branded"
"SIM", "Vodafone Multi-CSC. Contains: ATL, AVF, CNX, CYV, MOB, MTL, OMN, PRO, SIM, SWC, TCL, TOP, VD2, VDC, VDF, VDH, VDI, VGR, VIP, VOD, XFV"
"TCE", "Mexico Telcel branded"
"TEL", "Australia Telstra branded"
"TGY", "Hong Kong unbranded"
"THL", "Thailand Multi-CSC (FD-Versions). Contains: CAM, GLB, LAO, MM1, MYM, SIN, SMA, STH, THL, XME, XSP, XTC, XTE, XXV"
"TMB", "USA TMB branded (from qualcom, make EFS backup first!)"
"TNZ", "New Zealand Telecom/Spark branded"
"TTT", "Trinidad and Tobago Multi-CSC Contains: ALE, ARO, BVO, CHO, COO, EON, PCW, TPA, TTT, UPO, UYO"
"XAC", "Canada (W8 models) Multi-CSC Contains: BMC, BWA, ESK, FMC, GLW, KDO, MTA, RWC, TLS, VMC, VTR, XAC"
"XSA", "Australia unbranded"
"XSG", "United Arab Emirat Multi-CSC Conatains: ACR, AFG, AFR, BTC, DKR, ECT, EGY, KSA, LYS, MAT, MID, MWD, PAK, SMP THR, TMC, TUN, TUR, WTL, XFA, XFE, XSG"
"ZTO", "Brazil unbranded"
How-To install:
1. Having a backup of EFS partition (just in case)
2. Download csc selection and put it onto your phone
3. Boot into twrp
4. Install the zip file
5. Reboot
Download:
CSC Selection V1.2 Stock Exynos files
CSC Selection V1.2 ported Snapdragon CSC to Exynos
Credits:
- Sammobile for firmware
- Samsung for basics
- amarullz for the aroma installer
- thanks to all who sent me some csc files!
If you enjoy this I would be really lucky if you would hit thanks :victory:
And if you really really like it, here is a donation link:
PayPal
XDA:DevDB Information
CSC Selection, ROM for the Samsung Galaxy Note 7
Contributors
Tkkg1994
ROM OS Version: 6.0.x Marshmallow
ROM Firmware Required: TWRP recovery
Version Information
Status: Stable
Current Stable Version: V1.2
Stable Release Date: 2016-10-10
Created 2016-08-30
Last Updated 2016-10-20
Changelogs
Changelog V1.0:
- Initial release
Changelog V1.1:
- added CHC csc (from qualcom, user reported working but make backup of EFS)
- added HTS csc
- added IUS csc
- added TGY csc (from qualcom, user reported working but make backup of EFS)
- added TNZ csc
- added XAC csc (W8 models only)
- added XSG csc
Changelog V1.1.5:
- Added ATT csc
- Added BRI csc
- Updated DBT csc
- added BTU csc
- added TTT csc
- Updated THL
- added ORO csc
Changelog V1.2:
- Split selection into two zips because of size (on into ported for all original qualcom files and one into exynos)
- updated THL
- updated europe csc
- added KTC files
- added TMB files (untested, make backup)
- added INS csc
- added TCE csc
Reserved
If you want more csc to be supported send me those, please notice that many csc are the same (multi csc) and you need to switch them using the guide (link in OP)
Tkkg1994 said:
If you want more csc to be supported send me those, please notice that many csc are the same (multi csc) and you need to switch them using the guide (link in OP)
Click to expand...
Click to collapse
what csc should we use if we are using FD variant on u.s. carrier tmobile?
seraphyz said:
what csc should we use if we are using FD variant on u.s. carrier tmobile?
Click to expand...
Click to collapse
I was pondering the same thing for Canada
AllGamer said:
I was pondering the same thing for Canada
Click to expand...
Click to collapse
W8 models should work too. Since they are exynos
seraphyz said:
what csc should we use if we are using FD variant on u.s. carrier tmobile?
Click to expand...
Click to collapse
Most of them us UK csc
Sent from my SuperMan powered SM-G930F
can you add more CSC files from another countries? if so which file do you need us to share?
Tkkg1994 said:
W8 models should work too. Since they are exynos
Click to expand...
Click to collapse
Not quite... the W8 models are Snapdragons, just like T-mobile models.
betovanbuuren said:
can you add more CSC files from another countries? if so which file do you need us to share?
Click to expand...
Click to collapse
yes, I need the csc tar.md5 file from stock rom
AllGamer said:
Not quite... the W8 models are Snapdragons, just like T-mobile models.
Click to expand...
Click to collapse
no, s7 and s7e were exynos models, honestly I don't know if they changed to snap on Note 7
Wait, so flashing this will give me WiFi calling? I'm in the U.S., too, so if you guys could add U.S. CSC that would be splendid.
Will this work on Note 7 rom ports on S7 Edge?
no open China csc, Jesse say Galaxy Labs are working with China csc
daneoleary said:
Wait, so flashing this will give me WiFi calling? I'm in the U.S., too, so if you guys could add U.S. CSC that would be splendid.
Click to expand...
Click to collapse
Qualcom Snapdragon csc will give IMEI loose as soon as flashed. Sorry
masterismos said:
Will this work on Note 7 rom ports on S7 Edge?
Click to expand...
Click to collapse
Yes
Sent from my SuperMan powered SM-G930F
Tkkg1994 said:
Qualcom Snapdragon csc will give IMEI loose as soon as flashed. Sorry
Click to expand...
Click to collapse
I have an N930FD Exynos version, does that make a difference?
daneoleary said:
I have an N930FD Exynos version, does that make a difference?
Click to expand...
Click to collapse
no, all exynos versions can't run qualcom files
turkey TUR csc pleace Tkkg1994 number one developer.
csc from new Note 7 Vodafone Germany Firmware
https://mega.nz/#!0M4ynB7D
Hi @Tkkg1994 Here's the CSC IUS for Mexico unbranded, would you mind to add it to the next release?
http://www104.zippyshare.com/v/zDDoHYIh/file.html
Thanks in advance
Phalanges crossed this can eventually give me WiFi calling on the N930FD in the U.S...
Related
Swype
And what about swype language? Could you post which language are supported?
TY!
Could you delete the post or move it to the end of thread.
Code:
PDA: I9000XWJPB-REV03-ALL-low-CL663723.tar.md5
PHONE: MODEM_I9000XXJPP.tar.md5
CSC: GT-I9000-CSC-SERJP1.tar.md5
pit512
http://forum.androidfan.ru/index.php?showtopic=3376&view=findpost&p=32740
Rusky FW ?
yes
European languages is in the firmware
Nice one,
but It would be helpful to add some more specs on this release...
For your ease I'm Including them below.
Info:
Release Candidate Russian android 2.2 firmware JFB
Flash with any version of Odin 1.3/1.7
re-partition with pit - 512
ROM Features:
- APN for Russian operators.
- A strip search in contacts with Russian letters, but only those that are in contact list.
- No T9 quick search for Russian language in dialer.
- The standard navigation software from Navigon.
-----
could you please post some screen shots of what lanuages this ROM supports....
and any other features-programs added and/or missing from other JPx ROMs other than the above mentioned...
Cheers!
Converted to a middle package*, removed the bootloaders to make it safer, and deleted some excess data (sample documents, video and mp3).
The firmware was actually a low package, but it would not have booted after repartition unless I9000SERJP1 CSC was used.
*"The firmware was originally a high package, meaning it is a update patch.
Therefore the system will not boot up properly if the package is flashed with Odin MDL with re-partition option enabled.
I converted it to a middle level package, which can be flashed with Odin MDL with re-partition enabled.
It is now a OSP (Odin Separate Package) rom, so the CSC can be selected separately. It was originally a OIP (Odin Integrated Package) so the CSC was fixed to the one used in the original release (OXA in this case)."
GT-I9000_I9000XWJPB_I9000XXJPP_CODE-MODEM_OSP-MID
Available European Froyo CSCs:
CSC_I9000SERJP1 (Russia, Generic)
CSC_I9000GVODJP7 (UK, Vodafone branded)
CSC_I9000ITVJP3 (Italy, Generic)
CSC_I9000TMNJP3 (Portugal, TMN branded)
CSC_I9000XEFJP3 (France, Generic)
CSC_I9000ERAJP2 (Poland, ERA branded)
CSC_I9000DBTJP3 (Germany, Generic)
CSC_I9000OXAJPO-MULTI (Germany, Poland, UK, Generic)
CSC_I9000XENJP2-SINGLE (Netherland, Generic)
CSC_I9000XEEJP4-SINGLE (Scandinavia, Generic)
CSC_I9000NEEJP4-SINGLE (Scandinavia, Generic)
What's the build date on this? Any newer than JPA/JPO?
chambo622 said:
What's the build date on this? Any newer than JPA/JPO?
Click to expand...
Click to collapse
Same as JPO/JPA, 27 oct
DocRambone said:
Same as JPO/JPA, 27 oct
Click to expand...
Click to collapse
Okay. There really haven't been any ROMs with dates newer than that have there?
Deleted: Not actual any longer.
Richthofen said:
Therefore the system will not boot up properly if the package is flashed with Odin MDL with re-partition option enabled.
Click to expand...
Click to collapse
So how do I flash this one? Which options do I tick in Odin?
Richthofen said:
Converted to a middle package*, removed the bootloaders to make it safer, and deleted some excess data (sample documents, video and mp3).
The firmware was actually a low package, but it would not have booted after repartition unless I9000SERJP1 CSC was used.
*"The firmware was originally a high package, meaning it is a update patch.
Therefore the system will not boot up properly if the package is flashed with Odin MDL with re-partition option enabled.
I converted it to a middle level package, which can be flashed with Odin MDL with re-partition enabled.
It is now a OSP (Odin Separate Package) rom, so the CSC can be selected separately. It was originally a OIP (Odin Integrated Package) so the CSC was fixed to the one used in the original release (OXA in this case)."
GT-I9000_I9000XWJPB_I9000XXJPP_CODE-MODEM_OSP-MID
Available European Froyo CSCs:
CSC_I9000SERJP1 (Russia, Generic)
CSC_I9000GVODJP7 (UK, Vodafone branded)
CSC_I9000ITVJP3 (Italy, Generic)
CSC_I9000TMNJP3 (Portugal, TMN branded)
CSC_I9000XEFJP3 (France, Generic)
CSC_I9000ERAJP2 (Poland, ERA branded)
CSC_I9000DBTJP3 (Germany, Generic)
CSC_I9000OXAJPO-MULTI (Germany, Poland, UK, Generic)
CSC_I9000XENJP2-SINGLE (Netherland, Generic)
CSC_I9000XEEJP4-SINGLE (Scandinavia, Generic)
CSC_I9000NEEJP4-SINGLE (Scandinavia, Generic)
Click to expand...
Click to collapse
Hi Richtofen,
I have a single pda file for ddjg4, for India. How do I go about making it a middle level package & remove the bootloaders? Thanks.
Hi Richthofen,
is a OXX CSC File already available?
Thanks,
Alex
Could anyone tell us what are the available swype languages in this firmware version?
CSC_I9000OXXJP7_MultiCSC_EMEA
Supported product codes:
ATO (Austria) - Official combination with I9000XWJPA rom
AUT (Switzerland) - Official combination with I9000XWJPA rom
BSE (Belgium) - Official combination with I9000XWJPA rom
CNX (Romania) - Official combination with upcoming I9000XFJP? rom
COA (Romania) - Official combination with upcoming I9000XFJP? rom
COS (Greece) - Official combination with I9000XWJPA rom
CRO (Croatia) - Official combination with upcoming I9000XFJP? rom
CYO (Cyprus) - Official combination with I9000XWJPA rom
CYV (Cyprus) - Official combination with I9000XWJPA rom
EUR (Cyprus) - Official combination with I9000XWJPA rom
HAT (Romania) - Official combination with upcoming I9000XFJP? rom
IRD (Slovakia) - Official combination with I9000XWJPA rom
MET (Ireland) - Official combination with I9000XWJPA rom
MOT (Slovenia) - Official combination with upcoming I9000XFJP? rom
MOZ (Switzerland) - Official combination with I9000XWJPA rom
MSR (Serbia) - Official combination with upcoming I9000XFJP? rom
MTL (Bulgaria) - Official combination with upcoming I9000XFJP? rom
O2C (Czech Republic) - Official combination with I9000XWJPA rom
O2I (Ireland) - Official combination with I9000XWJPA rom
ONE (Austria) - Official combination with I9000XWJPA rom
ORO (Romania) - Official combination with upcoming I9000XFJP? rom
ORS (Slovakia) - Official combination with I9000XWJPA rom
SEB (Baltic) - Official combination with I9000XWJPA rom
SIM (Slovenia) - Official combination with upcoming I9000XFJP? rom
SMO (Serbia) - Official combination with upcoming I9000XFJP? rom
SUN (Switzerland) - Official combination with I9000XWJPA rom
TMZ (Czech Republic) - Official combination with I9000XWJPA rom
TOP (Serbia / Montenegro) - Official combination with upcoming I9000XFJP? rom
TPH (Portugal) - Official combination with I9000XWJPA rom
TRA (Croatia) - Official combination with upcoming I9000XFJP? rom
TSR (Serbia) - Official combination with upcoming I9000XFJP? rom
TWO (Croatia) - Official combination with upcoming I9000XFJP? rom
VDH (Hungary) - Official combination with I9000XWJPA rom
VDI (Ireland) - Official combination with I9000XWJPA rom
VIM (Macedonia) - Official combination with upcoming I9000XFJP? rom
VIP (Croatia) - Official combination with upcoming I9000XFJP? rom
VVT (Bulgaria) - Official combination with upcoming I9000XFJP? rom
XEH (Hungary) - Official combination with I9000XWJPA rom
XEO (Poland) - Official combination with I9000XWJPA rom
XEZ (Czech Republic) - Official combination with I9000XWJPA rom
XFA (South Africa) - Official combination with I9000XWJPA rom
XFC (South Africa) - Official combination with I9000XWJPA rom
XFE (South Africa) - Official combination with I9000XWJPA rom
XFM (South Africa) - Official combination with I9000XWJPA rom
Can this CSC_I9000OXXJP7_MultiCSC_EMEA go with XWJP6 firmware ?
miro666 said:
Can this CSC_I9000OXXJP7_MultiCSC_EMEA go with XWJP6 firmware ?
Click to expand...
Click to collapse
Sure, but it will not be official combination.
The JP7 CSC is the official combination for JPB or JPA? (I'm asking since you never released a OXX csc for JPA). Thanks
EDIT: Scratch that, I just saw you pair it with JPA. Long day..
One more question, is there a way to get the files that would normally be in the CSC? (movies pictures etc)
Tyxerakias said:
The JP7 CSC is the official combination for JPB or JPA? (I'm asking since you never released a OXX csc for JPA). Thanks
EDIT: Scratch that, I just saw you pair it with JPA. Long day..
One more question, is there a way to get the files that would normally be in the CSC? (movies pictures etc)
Click to expand...
Click to collapse
Yeah, but why on earth?
Haha, just to be able to restore it to the original version, say if we want to resale... some people like to have the original stuff on. And you had released the OXXJM1 before, for the original eclair csc, that's why I'm asking.
No big deal if it's a hassle, thanks again for all your low/mid releases, we really appreciate them
O2 Ireland have released the firmware finally anybody have the download by any chance?
I want to give it a try but i'm on JVQ right now!
http://community.o2online.ie/t5/And...erbread-for-samsung-galaxy/td-p/207850/page/2
I am on Vodafone in Ireland, and they similarly released 2.3.3 recently.
Search for CheckFusDownloader_v0.5.exe
I used it to download the firmware, then flashed with Odin.
The Vodafone command to Check and Download was
Code:
CheckFusDownloader_v0.5.exe -dl I9000XWJPA/I9000OXXJP7/I9000XXJPP/I9000XWJPA GT-I9000HKDVDI
where the long string is made up of PDA/CSC/MODEM/PDA and as far as I can tell only the last 3 characters of the Product Code string are relevant.
Here is what the output looks like for a -c (check) option. The -dl (download) option will download the updated firmware for you. Read up on the need for the decryption dll from Kies before starting your download.
Code:
C:\Download>CheckFusDownloader_v0.5.exe -c I9000XWJPA/I9000OXXJP7/I9000XXJPP/I9000XWJPA GT-I9000HKDVDI
Model: GT-I9000
PDA: I9000XWJPA
CSC: I9000OXXJP7
PHONE: I9000XXJPP
PCODE: VDI
------== Retrieved info ==------
LATEST_FW_VERSION: I9000XWJVH/I9000VDIJV1/I9000XXJVO/I9000XWJVH
BINARY_NAME: GT-I9000_VDI_1_20110706174225.zip.enc2
LAST_MODIFIED: 20110706174231
BINARY_CRC: 2797483747
C:\Download>
You basically need to replace the product ID and product code strings with the O2 equivalent - I got these from a colleagues phone that was still running Froyo. The key is you have to have a legitimate string before it can find and download the appropriate firmware for you.
EDIT :- Just tried making an O2 string, and it looks like it worked
Based on the title of your post, and the format of the latest Vodafone string, I just tried the following, and it appears to be correct for your purposes.
Code:
C:\Download>CheckFusDownloader_v0.5.exe -c I9000XWJVH/I9000O2IJV3/I9000XXJVO/I9000XWJVH GT-I9000HKDO2I
Model: GT-I9000
PDA: I9000XWJVH
CSC: I9000O2IJV3
PHONE: I9000XXJVO
PCODE: O2I
------== Retrieved info ==------
LATEST_FW_VERSION: [B]I9000XWJVH/I9000O2IJV3/I9000XXJVO/I9000XWJVH[/B]
BINARY_NAME: GT-I9000_O2I_1_20110706165346.zip.enc2
LAST_MODIFIED: [B]20110706165352[/B]
BINARY_CRC: 383734098
C:\Download>
EDIT:- END
Note: This process will not reset your Product Code - so you will still not be able to update it again through Kies without further steps.
For Vodafone (VDI) - I downloaded a MultiCSC ROM from Ramad's thread http://forum.xda-developers.com/showpost.php?p=14273101&postcount=1
In the Europe section there is a ROM that contains most European carriers. It mentions O2C but not O2I - perhaps an oversight, or maybe it is not in there.
XWJVH/XXJVO/OXXJV9/Sbl (CSC: MultiCSC): Download (142.5 MB) (Build date: Wed May 4 18:03:59 KST 2011)
(MultiCSC: AUT, BSE, CNX, COA, COS, CPW, CRO, CYO, CYV, EUR, IRD, KOR, MET, MOZ, MSR, MTL, O2C, ONE, ORO, ORS, SEB, SIM, SMO, SUN, TMZ, TOP, TPH, TRA, TRG, TSR, TWO, VDH, VDI, VIM, VIP, VVT, XEH, XEO, XEZ, XFA, XFC, XFE, XFM)
In any case probably worth your while to try. If O2I is not in there. Alternatively, there are 2.2 releases further down the page that do have O2I in them.
I flashed this, then used the *#272*IMEI# method to bring up the Sales Code selection menu. I picked VDI from there, and allowed it to reboot. This restored the VDI product/sales code. Then, I flashed the VDI version of 2.3.3 over the top.
Now Kies recognizes the ROM, and says it is the latest available.
Good luck!
Does this mean O2 in England will give the update to user soon?
rocksoccer said:
Does this mean O2 in England will give the update to user soon?
Click to expand...
Click to collapse
o2 uk has already released 2.3.3. JVH try updating your kies then plug phone in or download it from samfirmwares and flash with odin, but I can confirm we already have it, I got it through kies about 6/8 weeks ago.
Why does my Kies says 2.2 is the latest version? Anything is wrong?
rocksoccer said:
Why does my Kies says 2.2 is the latest version? Anything is wrong?
Click to expand...
Click to collapse
From your picture I would guess your phone model.
This forum is for the Samsung Galaxy S
You appear to have a Galaxy Ace
Here's a repack I made for the OXX region, using the JV9 csc:
http://www.multiupload.com/9MOT0ZGUZP
Contains csc's and access point names for the following countries:
Austria (ATO, ONE, TRG), Switzerland (AUT, MOZ, SUN), Belgium (BSE), Romania (CNX, COA, HAT, ORO), Greece (COS, EUR), Croatia (CRO,TRA,TWO, VIP), Cyprus (CYO, CYV), Slovakia (IRD, ORS), Korea (KOR), Luxemburg (LUX), Slovenia (MOT, SIM), Serbia & Montenegro (MSR,SMO,TOP,TSR), Bulgaria (MTL,VVT), Czech Republic (O2C, TMZ, XEZ), Ireland (O2I, VDI), Baltic region (SEB), Portugal (TPH), Hungary (VDH, XEH), Poland (XEO), South Africa (XFA, XFC, XFE, XFM).
After you install it, change the csc to your region, using the code *#272*IMEI# from your dialer (where IMEI your phone's IMEI no.).
It's a 3 file flash, you can flash it without repartition with Odin.
This is not branded anymore by the Polish providers, and does not contain any wallpapers or PLS-specific software. It is the original odexed firmware, and the only thing different is the csc part.
Enjoy!!
LoL go mate
install pit??
If you come from another Samsung gb or froyo rom you do NOT need to repartition, so no pit is needed.
But in case you do need to repartition from some exotic firmware, or because from some flashing mistake your rom was messed up, the pit is the usual 512.pit .
Tyxerakias said:
Here's a repack I made for the OXX region, using the JV9 csc:
Contains csc's and access point names for the following countries:
Austria (ATO, ONE, TRG), Switzerland (AUT, MOZ, SUN), Belgium (BSE), Romania (CNX, COA, HAT, ORO), Greece (COS, EUR), Croatia (CRO,TRA,TWO, VIP), Cyprus (CYO, CYV), Slovakia (IRD, ORS), Korea (KOR), Luxemburg (LUX), Slovenia (MOT, SIM), Serbia & Montenegro (MSR,SMO,TOP,TSR), Bulgaria (MTL,VVT), Czech Republic (O2C, TMZ, XEZ), Ireland (O2I, VDI), Baltic region (SEB), Portugal (TPH), Hungary (VDH, XEH), Poland (XEO), South Africa (XFA, XFC, XFE, XFM).
Enjoy!!
Click to expand...
Click to collapse
Thanx m8
just downloading it so wanted to ask
regarding csc's and access point names for countries
What 'bout VIM
... also is it with JVX bootloader
Vanto said:
Thanx m8
just downloading it so wanted to ask
regarding csc's and access point names for countries
What 'bout VIM
... also is it with JVX bootloader
Click to expand...
Click to collapse
FYROM is not in the OXX region, so VIM is not included... you need an XF rom.
I believe the latest rom fully compatible for you is this:
http://forum.xda-developers.com/showthread.php?t=1336301
Not sure if you can replace the JV1 csc from there in this XW rom, but you can try.
Dear users/develop I have a question about language choice in BNL9 rom for XEO (Poland). In this rom Samsung give a second Polish language (Silesian dialect). But when I change rom for example something new [G900F] [AMBASADII] [ODEX BOE3 v7.0] [KNOX 0x0] [AROMA] [MODY] [GALAXY S6/NOTE4] I can't find this dialect. Now I have a request to develop: Can You help me and add mod or something to install/add Silesian dialect?
I will be very grateful
daavve said:
Dear users/develop I have a question about language choice in BNL9 rom for XEO (Poland). In this rom Samsung give a second Polish language (Silesian dialect). But when I change rom for example something new [G900F] [AMBASADII] [ODEX BOE3 v7.0] [KNOX 0x0] [AROMA] [MODY] [GALAXY S6/NOTE4] I can't find this dialect. Now I have a request to develop: Can You help me and add mod or something to install/add Silesian dialect?
I will be very grateful
Click to expand...
Click to collapse
Cesc!
Try changing CSC to XEO. GOOGLE: HOW TO CHANGE CSC GALAXY S5. You will find it in 10 seconds.
@lingowistico I have a XEO but in language option I don't have Silesian dialect.
In phone info I have BL: BOD3; PDA: BOE3; CSC: BOE3;
Original CSC XEO, FW CSC: XEO, Active CSC: CEO, CSC Country: XEO.
daavve said:
@lingowistico I have a XEO but in language option I don't have Silesian dialect.
In phone info I have BL: BOD3; PDA: BOE3; CSC: BOE3;
Original CSC XEO, FW CSC: XEO, Active CSC: CEO, CSC Country: XEO.
Click to expand...
Click to collapse
Well there you go right there it says your csc is boe3. Try changing to xeo
@lingowistico but this info is in firmware tab - CSC Version: G900FFAXX1BOE3
CSC Code tab has info in all point - XEO.
Do You think this is a problem with second language? How can I change this (CSC Version)? Google show info how I can change CSC code but when I have a XEO in CSC Code...?
daavve said:
@lingowistico but this info is in firmware tab - CSC Version: G900FFAXX1BOE3
CSC Code tab has info in all point - XEO.
Do You think this is a problem with second language? How can I change this (CSC Version)? Google show info how I can change CSC code but when I have a XEO in CSC Code...?
Click to expand...
Click to collapse
I don't know. Maybe.
I looked at sammobile and saw that the last, unbranded, polish firmware is G900FXXU1BOA3 with csc G900FXEO1BOA1. Boe1 unbranded isn't out in poland, maybe that's why.
lingowistico said:
I don't know. Maybe.
I looked at sammobile and saw that the last, unbranded, polish firmware is G900FXXU1BOA3 with csc G900FXEO1BOA1. Boe1 unbranded isn't out in poland, maybe that's why.
Click to expand...
Click to collapse
I think so that's problem. But mayby can I change something in rom (catalog or file) and then I can add second language?
Hi all.
I'm a UK S7 Edge vodafone uk user (From from Vodafone with Vodafone CSC).
Does anybody have on a fast server the latest german vodafone firmware G935FXXU1DQAO (VD2 CSC)? My firmware is multi CSC and contains this vodafone csc also, so would like to flash via odin. Sammobile etc... only has slow or premium paid servers.
regards,
AJ.
ajay83 said:
Hi all.
I'm a UK S7 Edge vodafone uk user (From from Vodafone with Vodafone CSC).
Does anybody have on a fast server the latest german vodafone firmware G935FXXU1DQAO (VD2 CSC)? My firmware is multi CSC and contains this vodafone csc also, so would like to flash via odin. Sammobile etc... only has slow or premium paid servers.
regards,
AJ.
Click to expand...
Click to collapse
http://updato.com/firmware-archive-select-model
Or use a tool called samfir. google and you will find a post on XDA
how set CSC from vodafone multicsc firmware? (without root)
nightwind84 said:
how set CSC from vodafone multicsc firmware? (without root)
Click to expand...
Click to collapse
Using the Samsung info App, my phone displays the following...
Firmware's CSC Code
VOD
Active CSC Code
VOD
Available CSC Codes:
ATL, AVF, CNX, CYV, MOB, MTL, OMN, PRO, SIM, SWC, TCL, VD2, VDF, VDH, VDI, VGR, VIP, VOD, XFV
Vodafone Germany is VD2, therefore I should be able to use their recent stock ROM via odin and not lose OTA updates.
My phone is not rooted, and bought directly from Vodafone uk in November 2016. Knox 0x0.