Hello
I have formatted the system in twrp and I can't do nothing except going into twrp. I want to flash the stock system but it says:
Updater process ended with ERROR: 8
Error installing zip file 'external_sd/update.zip'
So where I can find the stock recovery to be able to flash the original system recovery.
Thank you.
roucoups said:
Hello
I have formatted the system in twrp and I can't do nothing except going into twrp. I want to flash the stock system but it says:
Updater process ended with ERROR: 8
Error installing zip file 'external_sd/update.zip'
So where I can find the stock recovery to be able to flash the original system recovery.
Thank you.
Click to expand...
Click to collapse
Just FYI , Next time you create a thread asking for things , you NEED to use the SEARCH feature of this forum.
http://forum.xda-developers.com/axon-7/development/rom-guide-updates-to-stock-files-via-t3469484
Those files are TWRP flashable zips.
DrakenFX said:
Just FYI , Next time you create a thread asking for things , you NEED to use the SEARCH feature of this forum.
http://forum.xda-developers.com/axon-7/development/rom-guide-updates-to-stock-files-via-t3469484
Those files are TWRP flashable zips.
Click to expand...
Click to collapse
I already tried several times and each time I start flashing zte_a2017.b03_bootstack_by_drakenfx.zip it says:
Updater process ended with ERROR: 6
Error installing zip file 'external_sd/ZTE_A2017G.B03_BootStack_by_DrakenFX.zip'
So what do I do now????
Any help for my Nova plus ( MLA-L03) bricked,
Im with a bricked unit (nova plus MLA-L03) . i cant find on all web page firmware Any help for restore my phone pls .
I will detail here what happened to my own bricked Nova plus (MLA-L03) and how I got it working again, with the help of a lot of comments from this forum. First you should know that when asking such questions it is advisable to detail your problem and what led to it, so that others are willing to help without having to ask for additional details.
I got soft-bricked after installing twrp and formatting the /data partition (wrongly thinking it was only userdata and that nothing could go wrong) so I could then backup the partition for future use. Basically what unbricked was flashing these 3 partitions from a full firmware release: /recovery, /boot and /system and I believe this is the only thing required, so you may try that first. I am not an expert and I would also like to know if the other steps may have contributed to the unbricking.
-Through TWRP I restored the stock recovery and the /data files from Bluesmoothie's backup (look in the TWRP folder, also you might have to create a backup yourself to generate the correct file structure), but that didn't unbrick
https://forum.xda-developers.com/showpost.php?p=70197735&postcount=99
-Then I found files for my device (MLA-L03) from the Huawei Firmware finder available here:
https://forum.xda-developers.com/tools/general/huawei-firmware-finder-team-mt-t3469146
-You can also find the firmware from this site but it is a hassle to search through everything:
http://hwmt.ru/oth/HWFF/info/view.php
-I downloaded the firmware called MLA-L03C6540B300CUSTC654D001 (the update.app file inside the .zip is actually 3.8GB and my understanding is it is a full OS, not merely an update)
IMPORTANT: using this firmware will install android 7 nougat and you may not be able to go back to android 6. Also as of this date you will not be able to use TWRP to backup you data partition and others, and I think that you cannot modify the system partition also (not sure, I would love to be wrong)
-(Not sure if it is worth mentioning but I tried to unzip the update.zip and put it in my sd card in a folder called /dload and boot by pressing all 3 buttons (boot to stock recovery) but the update got stuck, wouldn't go over 36%... I had also previously tried this with other zip packages for my device but none of them got over 12% or 30%)
-Then I used the Huawei Update Extractor (link right below to extract recovery.img, boot.img , and system.img from the update.app file extracted from update.zip.
https://forum.xda-developers.com/showthread.php?t=2433454
-Finally I flashed these 3 files with fastboot :
fastboot flash recovery "[filepath to recovery.img]" ( example: fastboot flash recovery "C:/my documents/recovery.img" )
fastboot flash boot "[filepath to boot.img]"
fastboot flash system "[filepath to system.img]"
-After I also did a factory reset, but I don't remember if I let the system boot completely before (I don't know either if it makes a difference... I hope someone here can answer)
Good luck!
Hi friends. I have the device MLA-AL10. i Want to change the region. Could you share your oeminfo file?
stas30 said:
Hi friends. I have the device MLA-AL10. i Want to change the region. Could you share your oeminfo file?
Click to expand...
Click to collapse
don't even try to change oeminfo, it will brick your phone network security
changing region on qualcomm devices is not easy, its complicated thing and involved paid tools
its better to see a professional to do this :good:
I recently tried flashing my phone cool pad cool1 as i was desperate to get my ota updates, when i try to flash it using YDGP tool is comes up with a error "check CID fail","bootloader is old" and several other errors that i saw in the dump file saved, so i tried updating all my driver's , but still it didn't work, then i tried a other trick of coverting my cpd file so that i can flash it through sp flash, but it was unsuccessful as i didn't find a .txt scatter file in download folder of YDGP tool, now i desperate,tired and i took it up as challenge to flash my phone at any rate
Coolpad cool 1
Rooted
Twrp installed
I can provide all the dump files and error screenshot
I am badly desperate , it would be great if someone can help me please /thanks in advance/i am new here, expect a and soon a possible
Wreckktangle said:
I recently tried flashing my phone cool pad cool1 as i was desperate to get my ota updates, when i try to flash it using YDGP tool is comes up with a error "check CID fail","bootloader is old" and several other errors that i saw in the dump file saved, so i tried updating all my driver's , but still it didn't work, then i tried a other trick of coverting my cpd file so that i can flash it through sp flash, but it was unsuccessful as i didn't find a .txt scatter file in download folder of YDGP tool, now i desperate,tired and i took it up as challenge to flash my phone at any rate
Coolpad cool 1
Rooted
Twrp installed
I can provide all the dump files and error screenshot
I am badly desperate , it would be great if someone can help me please /thanks in advance/i am new here, expect a and soon a possible
Click to expand...
Click to collapse
In coolpad forums u can find a full stock rom that can be flashed using twrp. link
Flashing it using twrp!
Is it equivalent to flashing my phone to its original manufacturer's state? I ll elaborate my problem onve again i want to have my ota update and in order to do that i have to flash my phone and thats where the problem pops up,i cannot flash my phone using pc ,i am having a error ,so will flashing the above rom with twrp help solve my problem and is the above rom a custom rom??
hi
i have a problem during updating cool 1
after reboot it show error (failed update bcz corrupted ) it can not see the file update
any help??????
open techamu.com
open this webiste
hi
i installed custom recovery to cool 1 c 103
after it finished model number changed to 106
what i have to do?????
Hello, the problem is what i want restore my Huawei p9 Lite vns-l23c212 but i have installed the EliteRom and the TWRP Elite, so i dont have the partitions (cust, vendor..) and not have a backup of that.
So I downloaded the Find firmware and i downloaded my Huawei version, but i dont have a idea of how install the .zip, i tried using fastboot but when i want install the partitions (cust,vendor..) the console give me a error saying "vendor command failed" or some
I want help from us, sorry for the bad english, im waiting ur comments
Hello,
use rollback method.
First revert your DATA filesystem from
F2FS to EXT4 using TWRP, then follow guide
in UNIFIED HELP THREAD..
Here the link..
https://forum.xda-developers.com/huawei-p9lite/how-to/unified-help-thread-huawei-p9-lite-t3649152
Read carefully, you need L23C212 rollback...
Regards.
Hey
so i have to install the emiui4.1 and then update the huawei until reach to the emui5
Sertinium said:
so i have to install the emiui4.1 and then update the huawei until reach to the emui5
Click to expand...
Click to collapse
Yes, the rollback package will give you
c900 global firmware. From there install
B160 for dual sim, B161 for single sim..
When you will stay with this firmware,
update using updater stock or use Firmware Finder..
Follow the guide..
Regards..
Edit: sorry B160 and B161 are firmware persent in C432 Europe area-
Dont know the one for your cust/region (C212).
Let google do the work for you..
Dadditz said:
Edit: sorry B160 and B161 are firmware persent in C432 Europe area-
Dont know the one for your cust/region (C212).
Let google do the work for you..
Click to expand...
Click to collapse
Okay but the problem now is what in number of compilation say nrd90m test keys and i installed the firmware of my phone
Sertinium said:
Okay but the problem now is what in number of compilation say nrd90m test keys and i installed the firmware of my phone
Click to expand...
Click to collapse
Hello,
according with the guide you flashed
wrong package...
You need FULL OTA UPDATE package, it must be
1.7/1.9 gbytes in size wich cames with data..
Flash new one or repeat the whole process.
I found this firmware on internet,
but do not assume any responsability.
If you want give a try here the direct download..
Check it with an antivirus/antimalware software..
http://download-c.huawei.com/download/downloadCenter?downloadId=92443&version=361914&siteCode=mx
If all will go in the right direction at the end
reboot to e-recovery (vol+ + Power)
and make a factory reset.
Hope this time will work..
Best regards
Dadditz said:
Hello,
according with the guide you flashed
wrong package...
You need FULL OTA UPDATE package, it must be
1.7/1.9 gbytes in size wich cames with data..
Flash new one or repeat the whole process.
I found this firmware on internet,
but do not assume any responsability.
If you want give a try here the direct download..
Check it with an antivirus/antimalware software..
http://download-c.huawei.com/download/downloadCenter?downloadId=92443&version=361914&siteCode=mx
If all will go in the right direction at the end
reboot to e-recovery (vol+ + Power)
and make a factory reset.
Hope this time will work..
Best regards
Click to expand...
Click to collapse
Hello, I have already downloaded that file and I already flashed it but the compilation says that it is C900B130 .... instead of C212B130, so how do I change the cust to C212 ?, because with the other I can not receive the update of emui5, and if the effort with the Finder Firmware gives me the NRD90M test keys.
Sorry for the inconvenience
Sertinium said:
Hello, I have already downloaded that file and I already flashed it but the compilation says that it is C900B130 .... instead of C212B130, so how do I change the cust to C212 ?, because with the other I can not receive the update of emui5, and if the effort with the Finder Firmware gives me the NRD90M test keys.
Sorry for the inconvenience
Click to expand...
Click to collapse
Hello man,
really dont know if i badly explained..
My friend to bring back to MM
you have to strictly follow the guide i posted you..
So you need VNS-L23C212 rollback package then
extract update.app, create a "dload" folder in SD and
pur in it. Turn off and proceed with three buttons method*****
When finished you will have C900 firmware..
(that's a LIMBO firmware)
Delete update.app from SD card...(not dload folder)
Now take tour VNL-L23C212Bxxx firmware,
extract update.app, put in dload folder in SD card
and repeat with three buttons metod.
If all take right direction at end of flash, after booting,
reboot to e-recovery (vol up+ power button) and make a factory reset. Now you have MM firmware..
That's the guide say...
*****= vol up+vol down+power button until It start flashing
That's all my friend...
The other way is to flash L23C212 oeminfo.zip (if you find It)
with TWRP, then VNS-L23C212Bxxx with dload and three
button method. At the end factory reset..
Best regards
same problem,
Dadditz said:
Hello man,
really dont know if i badly explained..
My friend to bring back to MM
you have to strictly follow the guide i posted you..
So you need VNS-L23C212 rollback package then
extract update.app, create a "dload" folder in SD and
pur in it. Turn off and proceed with three buttons method*****
When finished you will have C900 firmware..
(that's a LIMBO firmware)
Delete update.app from SD card...(not dload folder)
Now take tour VNL-L23C212Bxxx firmware,
extract update.app, put in dload folder in SD card
and repeat with three buttons metod.
If all take right direction at end of flash, after booting,
reboot to e-recovery (vol up+ power button) and make a factory reset. Now you have MM firmware..
That's the guide say...
*****= vol up+vol down+power button until It start flashing
That's all my friend...
The other way is to flash L23C212 oeminfo.zip (if you find It)
with TWRP, then VNS-L23C212Bxxx with dload and three
button method. At the end factory reset..
Best regards
Click to expand...
Click to collapse
same problem but it shows update package does not exist.
muhammad22295bilal said:
same problem but it shows update package does not exist.
Click to expand...
Click to collapse
Hello dude please type here your phone model and firmware you're currently using.
Have a happy holidays
unable to mount vendor.
Dadditz said:
Hello dude please type here your phone model and firmware you're currently using.
Have a happy holidays
Click to expand...
Click to collapse
i have installed twrp, creat backup and went on to change the cust to 185 from c432. its bricked , i restored my backup but it went in boot loop with huawei logo, then i want to install coustom rom it said
"failed to mount '/vendor '(invalid argument) "
"failed to mount '/product '(invalid argument) "
its not end yet then i factory reset , restore again this time it doesnt goes to boot loop, but an error message "unable to wipe vendor"
__**** files attached****___
muhammad22295bilal said:
i have installed twrp, creat backup and went on to change the cust to 185 from c432. its bricked , i restored my backup but it went in boot loop with huawei logo, then i want to install coustom rom it said
"failed to mount '/vendor '(invalid argument) "
"failed to mount '/product '(invalid argument) "
its not end yet then i factory reset , restore again this time it doesnt goes to boot loop, but an error message "unable to wipe vendor"
__**** files attached****___
Click to expand...
Click to collapse
Dear user,
I really would like to help you, but do you really want it?
You were stuck on the update problem, you did it on your own and now you have TWRP and backup problems.
Also you did not answer any of my questions,
for me it's ok, but how can someone help you?
Good luck dear ..
Greetings
vns-l21c432 and p9 lite
Dadditz said:
Dear user,
I really would like to help you, but do you really want it?
You were stuck on the update problem, you did it on your own and now you have TWRP and backup problems.
Also you did not answer any of my questions,
for me it's ok, but how can someone help you?
Good luck dear ..
Greetings
Click to expand...
Click to collapse
p9 lite with vns-l21
muhammad22295bilal said:
p9 lite with vns-l21
Click to expand...
Click to collapse
Complete firmware please...
VNS-L21C432B??
TWRP you are using ?
What you're planning to do...
Wish you have a stock firmware / rebrand to C185
or flash a custom roms.
vns-l21c432b504
Dadditz said:
Complete firmware please...
VNS-L21C432B??
TWRP you are using ?
What you're planning to do...
Wish you have a stock firmware / rebrand to C185
or flash a custom roms.
Click to expand...
Click to collapse
the installed frimware was vns-l21c432b504 , then i want to go back to c185 so i installed twrp to make my phone root and to install c185 , it shows error i took restore of backup and phone goes to boot loop with huawei logo, then i again restore failed again. simply i have
p9lite
twrp recovery 3.1.1.0
when i restore my back up at last it shows "unable to wipe vendor" , but when i install other imges file it shows
"unable to mount vendor "
"unable to mount product".
now i just want my working phone back please healp
muhammad22295bilal said:
the installed frimware was vns-l21c432b504 , then i want to go back to c185 so i installed twrp to make my phone root and to install c185 , it shows error i took restore of backup and phone goes to boot loop with huawei logo, then i again restore failed again. simply i have
p9lite
twrp recovery 3.1.1.0
when i restore my back up at last it shows "unable to wipe vendor" , but when i install other imges file it shows
"unable to mount vendor "
"unable to mount product".
now i just want my working phone back please healp
Click to expand...
Click to collapse
Hello dear,
We will try to make your last one work
system, ie the L21C432B504.
Do you still have access to the system?
Do you have access to TWRP?
Do you have access to fastboot?
You have tried to install the oeminfo file
and this may have closed the bootloader,
so I invite you first, even if it says that it is unlocked, to re-unlock it,
but not before you have made backups of your stuff, as a factory reset will be done.
Reply me when you ready ...
here is your answers brother.
Dadditz said:
Hello dear,
We will try to make your last one work
system, ie the L21C432B504.
Do you still have access to the system?
Do you have access to TWRP?
Do you have access to fastboot?
You have tried to install the oeminfo file
and this may have closed the bootloader,
so I invite you first, even if it says that it is unlocked, to re-unlock it,
but not before you have made backups of your stuff, as a factory reset will be done.
Reply me when you ready ...
Click to expand...
Click to collapse
no access to system,
access to twrp
access to fasatboot
bootloader and phone both unlocked.
muhammad22295bilal said:
no access to system,
access to twrp
access to fasatboot
bootloader and phone both unlocked.
Click to expand...
Click to collapse
Ok dude reboot to fastboot and
unlock again your bootloader.
After factory reset see if have access to system...
Tell me...
no access to system.
Dadditz said:
Ok dude reboot to fastboot and
unlock again your bootloader.
After factory reset see if have access to system...
Tell me...
Click to expand...
Click to collapse
after unlock bootloader , cant access to system
Hello,
This question has been posted before but I didn't find a solution on the previous threads.
My VNS-L31C432 doesn't boot past 'Your device is booting now'' after trying to install the C900B300 rollback package. The dload method, as well as the default recovery don't work either. I can access fastboot and flash another rom (using this method: https://forum.xda-developers.com/general/general/guide-flash-variant-version-firmware-t3506404), but so far nothing worked.
I can also install TWRP, access adb and shut down. I wiped everything from my phone in order to do a clean install, didn't work.
I was previously on Marshmallow (VNS-L31C432B161)
Any help would be greatly appreciated!
If your twrp works , try to install the rom with this method : https://forum.xda-developers.com/hu...ota-p9-lite-upgrade-rebrand-tools-pc-t3778839, it worked for me from soft brick. Download and try with FullOTA-MF-PV rom first.
lost3 said:
If your twrp works , try to install the rom with this method : https://forum.xda-developers.com/hu...ota-p9-lite-upgrade-rebrand-tools-pc-t3778839, it worked for me from soft brick. Download and try with FullOTA-MF-PV rom first.
Click to expand...
Click to collapse
Well holy sh** thank you so much!
I saw that you have single sim phone , so you must download rom with odd number ,try to download 391 version.
Download the HWOTA-VNS.zip file and unzip it. Copy the directory HWOTA-VNS to the root of your sd card.
When all of 3 files downloads find the one update_full_hw_xxxx zip (xxx is like e.g vns-l21c391 ) and rename it to update_all_hw.zip, copy the 3 files inside the HWOTA-VNS/upgrade directory.
Reboot to twrp and go to WIPE->Advanced wipe mark data and push Repair or Change File System, if writes: File System : ext4, live it , if its F2FS , hit Change File System and change it to ext4. Go back to main menu , go to install guide to HWOTA-VNS directory and install hwota_update.zip after that the phone will reboot and starts to update.