i have issues on my phone as it is just showing only the first window how do i can install new software on phone ,i have tried one tool odin connected to my laptop and try to install but it is not helped me ..i dotn have any idea how to reformat my phone and install new os .Please advise.
Related
hi anyone pls help,
i have one imate jasjam, the initial problem is i done a hard reset and the phone reboot and it wont finish running the customise application installation, after that the phone cant detect network, i had run a hard spl into the phone and then try to flash a rom that i download from forum but it only run 11% then stop then i realise that the rom i flash is for htc jasjam not imate jasjam, now my phone can only stay at the boot loader mode, i also try different rom but no luck so i think i ask for your help
here is my device details at the boot loader mode
IPL-1.04
SPL-2.10.01ipro
before i flash it i also cant find any radio rom version in this phone so i guess the radio rom also missing or what just not sure....
i think i flash the htc jasjam wrong model rom even now i flash back the original JASJAM_WWE_1.20.305.3_1.20.305.104_1.07.03.10_ship this error message come out "ERROR [260]: update error" and it ask me to check my usb connection.
i search the forum and few member advice me to use mtty and i did tried that many time it didnt work, another member advice me to use this method "Formate yr memorycard & Unzip attached file in your memorycard named Hermimg.nbh & put yr cell in boot mode & follow screen instructions..........this illl boot yr celll out to boot mode......... " i tried that but the phone always stay at boot mode and no other instructions came out at all so im really lost and just hoping somebody can help me solve this problem...
can anyone pls guide me step by step of how to flash this phone back to normal, your help is much appreciated, many thanks.
Hi, i had the same problem flashing from the SD card. Are you using Vista or Windows7? I tried with Vista Format card, drag and drop renamed image onto sd card. Stuck it in the phone, reset and like you say hangs on bootloader. Then i tried the same thing from my Windows XP laptop, exactly the same format, rename drag and drop and everything works fine. Hope this helps
first i tried with vista then i tried with xp the problem still there, any other idea to solve this problem? thanks anyway for your advice
roms?
G'day, I've only really been reading about roms and these phones for only a few hours but I'm pretty sure that htc jasjam and imate jasjam are one and the same phone i think the said rom are used with all hermes type phones..
thanks and sorry for my ignorance if i'm mistaken
Hi ,
I was flashing my jasjam using sspl-herm and a 6.1 rom ,
While upgrading the progress bar reached the end but it stayed saying upgrade in progress , it took too longer than normal and i knew it wouldnt continue so i soft resetted the phone ,
now it's stuck in the splash screen before even the windows loading.
Plz plz plz help....
if you can access bootloader
a) if you dont have hardspl installed already, install it or you're going to be screwed soon.
if you can access bootloader, pop the nbf file onto your microsd <2gb as HERMIMG.NBH insert it into the phone and follow onscreen instructions.
flashing via SD is always a safer bet anyway.
Hey ,
Thnx guys 4 help
1st I tried hard resetting and it didnt work
2nd I DONT have hard spl
3rd I get into bootloader , i plug the usb cable but i cant flash , the ruuwrapper program says error during upgrade , i think it cant access the phone first coz the mobile device icon in my computer is emtpy , second activesync says not connected(although it tries to) and device manager reads an " htc usb sync " drive but no letter or something
Still no luck , any help ??
I think I've got same problem..
It can't run again after splash screen..
My phone was working well. Then i installed the new rom from mdj, CM7.
At first it was working good, but then i plugged my phone to pc but it wasnt recognized anymore. So i wanted to change back to another rom. No matter what i did my pc and my netbook didnt recognize my phone anymore. then i tried to update the rom with CW and a fixed rom from CM7. Since then my phone tells me theres nothing to boot in nand. And pc still not recognizing my phone. Pls help me guys. im trying to fix this since 3 hours but nothing works...pls help me.
power off your phone (pull battery and put it back in)
hold volume down and power button until you get to the tri colored screen
plug the usb into the computer
flash over any RUU
i tried that allready but as i said pc dont recognize as usb...so at the screen it says serial and not usb...but still i tried to install it and it didnt work
When i boot the phone it says...nand kernel open failed...is there a way to install a nand rom completely over CW?
Then is sounds like your pc has the prob not the phone.
Reboot PC and also try re-instaling Mobile Device Center or ActiveSync depending on what version of windows you have.
sry i should have tell that too...i have windows 7 and mobile device center...i restarted pc a few times allready reinstalled the program too...but when it comes to installing device driver it tells me it couldnt be installed...and i dont know what to do
H-KaN said:
sry i should have tell that too...i have windows 7 and mobile device center...i restarted pc a few times allready reinstalled the program too...but when it comes to installing device driver it tells me it couldnt be installed...and i dont know what to do
Click to expand...
Click to collapse
have you tried reflashing winmo using sd card? then start all over again.
H-KaN said:
sry i should have tell that too...i have windows 7 and mobile device center...i restarted pc a few times allready reinstalled the program too...but when it comes to installing device driver it tells me it couldnt be installed...and i dont know what to do
Click to expand...
Click to collapse
Trying flashing your official WM Rom through SDcard. Once you are back in WM, you can flash your desire NAND Rom.
i took the ruu_signed.nbh from an official rom named it to leoimg.nbh and put it on my sd...started the phone with volume down and power...it is updating
radio-ok
rcust-ok
bootloader-ok
splash-ok
os-
configdata-
the first time the update didnt work and now its updating again and i hope it will finish and make it work again and not cancel again...
thank u for the advice...maybe it will work
H-KaN said:
i took the ruu_signed.nbh from an official rom named it to leoimg.nbh and put it on my sd...started the phone with volume down and power...it is updating
radio-ok
rcust-ok
bootloader-ok
splash-ok
os-
configdata-
the first time the update didnt work and now its updating again and i hope it will finish and make it work again and not cancel again...
thank u for the advice...maybe it will work
Click to expand...
Click to collapse
Hope everything goes well for you......Good Luck
yesssssssssssss phone starts again...winmo is installed! the only problem which left is that the pc dont recognize my phone...i reinstalled mobile device center...but it cant install the phone driver...what can be the problem? does anyone know a page where i can download just the driver and install it?
H-KaN said:
yesssssssssssss phone starts again...winmo is installed! the only problem which left is that the pc dont recognize my phone...i reinstalled mobile device center...but it cant install the phone driver...what can be the problem? does anyone know a page where i can download just the driver and install it?
Click to expand...
Click to collapse
better fully uninstall mobile device center using softs like your uninstaller and alike to totally clean the installation then plug in usb. Then let Windows 7 do its job in installing the driver.
i cant believe it :S for real i cant believe it...i just changed the usb cable and tried with it :S and it worked :S the driver got installed and now its working :S now thats curious...not working with original cable anymore but with a cable from the nokia n97 :S
Hello,
Today i have tryed to flash a new CWM on my HD2.
But i get always an error "USB init. Failed" so i've searched in google an in this forum for an solution but i haven't find any.
I've tryed to flash CWM in Bootloader mode but my pc's (2 XP ones and 1 Win7) don't detect my phone.
Please Help
install windows mobile device center to your pc.otherwise it doesn't recognize it.
I have installed WMDC. But it doesn't recognize it at all.
but cwm isnt flashed from bootloader? r u using magldr or clk?
MAGLDR but also in Flasher mode nothing happend. In WMDC i have already disabled USB Connections but also -.- nothing
try another pc. and last solution format pc(i did so a few weeks ago when i met the same problem)
after last time i formated my computer imy phone wasnt detected in computer ...in bootloader i couldnt see USB just serial ...i just installed activesync ...and right after phone was detected ...so try to install activesync and see
[q] htc hd2 flashing rom issue
Can anybody help me.I have MAGDLR and the Bootloader installed by a previous chap who owned the phone, all the correct versions. THe phone HD2 (T-Mobile), when I got it, had Gingerbread on,but the FM radio was not working,
so I thought an Upgrade was in order. I went to the MIUI website and downloaded the latest stable rom and followed the instructions as best as possible, but I had problems with the
Bootloader going from Serial to USB and being able to flash the rom like that. I then tried the loading the rom ZIP file to the SD card, and then using Clockwork orange recovery to
to install the ZIP file from SD card. That being said, I rebooted and the phone just stayed hung on the HTC logo screen. (And I didn't do a back up, before I started.)
I eventualy found a Jaws MIUI rom, that instaling via Clockwork Orange, worked, but it is Froyo and not a lot of stuff works very well. What is the correct procedure to install
from SD card, with Clockwork Mod Recovery? The Roms that I download, do I have to unpack the zip, do something on the files? I have read that depending on the rom that you have, when
doing a ClockWorkMod Recovery installation, that you need to have the right Size partition or image disk version of the Clockwork recovery MOD, But I can't swap and change this as my USB does not work between the phone and the PC.
I have installed active sysnc, does not work and I have tried this both on my Desktop and Laptop. As the one response suggests, Formatting your PC seems a bit extreme.
Help, Pleeeeeeeeez!
Thanks
Asdoos said:
Hello,
Today i have tryed to flash a new CWM on my HD2.
But i get always an error "USB init. Failed" so i've searched in google an in this forum for an solution but i haven't find any.
I've tryed to flash CWM in Bootloader mode but my pc's (2 XP ones and 1 Win7) don't detect my phone.
Please Help
Click to expand...
Click to collapse
try with another usb cable
After many tests with other PC´s and USB cables and different Windows / Linux installations I have noticed that my phone doesn't charge -.-
I think its an Hardware Porblem of my Phone. Does anyone know how to fix it?
Usb port is gone on your phone get it replaced.
Sent from my HTC HD2 using XDA App
Hello, I'd love to mention one thing bec I got the same problem like some fri. No need to worry fri.My problem troubleshooting is " Just install Windows Mobile Device Center". Thanks all and I love xda.
Hello a friend of mine gave me that phone to try to take it back from the death
The problem is that rubbish phone cant be recognised by the computer firts .... needed drivers are instaled but it refused to recognised it .... other phones are recognised with no problem at all including another lenovo devices also...the another problem is that when trying to install something from the sdcard a stock rom or custum via the recovery it returns error aborted .... and thats it
what to do with that piece of trash any suggestions :S
thanks in advance