Hi , my name is ricardo , im going to be honest with you guys.
So , i rooted my phone , a samsung galaxy j5 , SM-J500FN , with superuser , then i had gamekiller.
But i decided that i wanted to unroot , so i did , i had usb depuration on , after i unrooted , the phone said that the security of the phone was at risk , i dont have antivirus , its from samsung , knox , i think... I dont know.
So , i decided to erase everything. I did , and after it , turning on the phone says : Set warranty bit - Recovery
and the screen goes black . Cant get into recovery , but i can get to download mode , but not reconizable in the pc or odin , or kies or smartswitch , tried 4 pcs , unistalled drivers , installed , tried on windows 10 , 8 and 7 , and also xp.
In download mode the phone says:
ODIN MODE
Product name : SM-J500FN
CURRENT BINARY - Custom
SYSTEM STATUS - Custom
FAP LOCK : OFF
KNOX WARRANTY VOID : 0X1 (4)
QUALCOMM SECUREBOOT: ENABLW (CSB)
RP SWREV : S1 , T1, H1, R1, A1, P1
SECURE DOWNLOAD : Enable
If you know how to fix this , please tell me ... :crying::crying::crying:
Hondaturboeg6 said:
Hi , my name is ricardo , im going to be honest with you guys.
So , i rooted my phone , a samsung galaxy j5 , SM-J500FN , with superuser , then i had gamekiller.
But i decided that i wanted to unroot , so i did , i had usb depuration on , after i unrooted , the phone said that the security of the phone was at risk , i dont have antivirus , its from samsung , knox , i think... I dont know.
So , i decided to erase everything. I did , and after it , turning on the phone says : Set warranty bit - Recovery
and the screen goes black . Cant get into recovery , but i can get to download mode , but not reconizable in the pc or odin , or kies or smartswitch , tried 4 pcs , unistalled drivers , installed , tried on windows 10 , 8 and 7 , and also xp.
In download mode the phone says:
ODIN MODE
Product name : SM-J500FN
CURRENT BINARY - Custom
SYSTEM STATUS - Custom
FAP LOCK : OFF
KNOX WARRANTY VOID : 0X1 (4)
QUALCOMM SECUREBOOT: ENABLW (CSB)
RP SWREV : S1 , T1, H1, R1, A1, P1
SECURE DOWNLOAD : Enable
If you know how to fix this , please tell me ... :crying::crying::crying:
Click to expand...
Click to collapse
Actually Odin must detect the phone in download mode if correct drivers are installed. You may try this. Try to install TWRP recovery in your device. And than install CM 12.1 in it. But the best option is to download latest firmware for your mobile from Sammobile & flash it via Odin. Try to reinstall the drivers in your PC and see. Hope it will help.
rjrulz007 said:
Actually Odin must detect the phone in download mode if correct drivers are installed. You may try this. Try to install TWRP recovery in your device. And than install CM 12.1 in it. But the best option is to download latest firmware for your mobile from Sammobile & flash it via Odin. Try to reinstall the drivers in your PC and see. Hope it will help.
Click to expand...
Click to collapse
Thank you for the help , but my dad did something to the cable , not original though , and odin managed to reconize it , but its weird because , i tried also in a new cable of galaxy s5 and it didnt work , but thanks , the phone is working but pc doesnt reconize it still , dont know why , but the phone is working ... Its really weird.
Hondaturboeg6 said:
Thank you for the help , but my dad did something to the cable , not original though , and odin managed to reconize it , but its weird because , i tried also in a new cable of galaxy s5 and it didnt work , but thanks , the phone is working but pc doesnt reconize it still , dont know why , but the phone is working ... Its really weird.
Click to expand...
Click to collapse
WELL FROM experience for galaxy s duos 2 when the phone receive some kind of electric choc or smth cpu config may reset
Related
Hello,
I'm having a bad issue with my phone. GS4 gt i9506 norwegian version... I have downloaded the I9506XXUBML6 stock firmware and lollipop version for the phone trying to get it working again. DL mode says:
ODIN MODE
Product name: gt-i9506
current binary: Samsung official
system status: official
Knox kernel lock: 0x0
Knox warranty void: 0x1
Qualcomm secureboot: enable
Rp Swrev: S1, T1, R1, A1, P1
Write protection: enable
UDC START
When in odin and trying to put in firmware it just gets stuck.
Problems started after using auto root.
Most likely you will need more information
Thanks in advance
can you post the log of odin?
also when flashing with odin tar.md5 you need to wait like 3 or 4 minutes depends on your pc in order to start flashing.
Hello again,
I actually fixed the phone already so I will only tell what I did. The log file abruptly ended in the middle transiting data. No error. This led me to believe:
a) error with the file (wrong image?)
b) problem with usb port or cord
B was easier to solve. First went through all the ports on my laptop. All 3 of them. No change. Then changed the cord to a new one(newer). Neither of these worked so I asked my gf to nicely lend her desktop with marvelous 9 usb ports. :angel: Moved files to usb stick (thank you usb3) with odin in it too(so I will know whether it's a or b) Downloaded samsung drivers.
Phone connected. Files moved to D. Odin start. Connection! AP selected. Wait 15 min and come back. Phone is working. OTA lollipop incoming.
Thank you for your quick reply,
Hope this post will help someone else
Don't Panic
My problems began this morning because of my stupid merciful ass.
Until this morning i had a lg g3 which worked flawlesly but one friend of mine which posesd the magic phone sugested that we should make an exchange .
I saw that he was so happy about the g3 so i accepted .
He gave me the samsung s5 + which worked at the time .I tried the camera ,a litle game ,and everithing was ok.
After i got home i wanted to insert my sim and got the batery out .
After i put in the battery the phone doesnt work anymore .I dosnt start ,it doesnt charge ,i doesnt work at all. If i put a micro sd i can go into the boot recovery mode but thats all.
Boot recovery mode
check boot partitions
sbl1 partition doesn't exist
ddi:mmc_read failed
odin mode(high speed)
product name :sk-g901f
curent binary:samsung official
system status:custom
reactivation lockff
knox waranty void:0x0
qualcomm secureboot :enable(csb)
rp swaev : s1 , t1, a1 , a1 , p1
secure download :enable
udc start.
Since the last update my phone does't work anymore. He does nothing more, but i can get in download modus.
What can i do , i have no experiens with flashing , but if somebody can explane it step over step i can do it with odin
This is de information that i can read on top off the screen in download modus
Odin Mode : high speed
product name : SM-N910F
Current Binary : samsung official
system status : custom
reactivition lock : OFF
Knok Waranty void : 0x1(2)
Qualcom secureboot : enable (csb)
Ap swaev : S 1 , T 1 , R 1 , A1 , P1
Secure Download : enable
UDC Start
Also my note 4, after my last update it is not stable, i keeps rebooting, and i doesnt charge, i need to keep it in charge all the time. Once i remove from charging it keeps rebooting like crazy. I cant use it even for a minute also plugged in it keeps rebooting but not much often. I tried hard reset, wiped everything and the issue is still here. The last update was about some Samsung cloud. Have anyone had this issue before, is it a software issue or something wrong with my battery ?? Help.
Hi,
i'm having some trouble with my note 4. so i recived the note from a friend and she told me what was the problem. the problem is that she would turn it off then when she trys to attempt to turn it back on it will show the samsmung boot screen then all black with the blue and white(maby baby blue, i cant tell exacly)and sometimes boots a 2nd or 3rd time. leave it like that and the phone would start getting hot. so i used odin and installed a freash BL, CP, and CSC. then i left the phone withpout the battery for about 10 minute's then i put the battery back on and turned it on. it worked! but after a while i accidentaly turned it off. the same problem was back(i dont know if this is important but when ever u tryed to update the software it would alway's fail). so i thought why dont i just install freash clean OS and i whont have to face this problem again. i installed android 5.0.1 and it did not work, this time the blue adn white notification light was not on. so i installed it again but only the BL. the light was back. please help me on what to do or give me a link to a legitament clean OS. i've tryed every trick! pull out the battery then press and hold the power button to drain out the ramining power and leave the phone for about 10 min. try to go in recovery mode(when i try to do this, it goes all black also), install a clean freash OS, ECT. im running out of options! what should i do! it cant be the hardware because everything was working fine. it cant be the screen because i've personally seen the screen work perfectly fine, plus the samung boot logo( the "samsung galaxy note 4 powered by android" boot). i dont know what to do!
Reboot into download mode and see what firmware is on it. then download the latest MM 6.0.1 firmware and flash it with odin. Depending on the model, the BL may be locked to prevent flashing older firmware. If that doesn't work you may have to flash a pit file with the firmware but that is last resort. If you can take a picture of what download mode says and post it here it would be way easy to help you fix it bro
noob4598 said:
Reboot into download mode and see what firmware is on it. then download the latest MM 6.0.1 firmware and flash it with odin. Depending on the model, the BL may be locked to prevent flashing older firmware. If that doesn't work you may have to flash a pit file with the firmware but that is last resort. If you can take a picture of what download mode says and post it here it would be way easy to help you fix it bro
Click to expand...
Click to collapse
imsorry but i am unable to post a link nor a picture due me being a new user.
but it does say this:
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910A
CURRENT BINARY: SAMSUNG OFFICAIL
SYSTEM STATUS: OFFICIAL
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0X0
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T2, R1, A2, P1
SECURE DOWNLOAD: ENABLE
UDCSTART
Hi there,
I wanted to put Cyanogenmod on an J500FN and went straight to Odin without enabling developer options Why? Bc I am dumb.
Since Odin failed I cant even get into recovery mode. Can't enter a password. Can't do anything, really.
Normal start and Recovery Mode start result in the screen showing the Android logo and then turning yellow/green before fading to black.
Download mode is working. I tried Kies, Smart Switch, Odin. Each time it fails and a read line on the phone appears ("Mom Mode. Can't Download"). Using stock firmware from Sammobile results in the same outcome.
Download mode says:
ODIN MODE
PRODUCT NAME: SM-J500FN
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FRP Lock: Off
WARRANTY VOID: 0x0
RP SWREV: S1, T1, H1 R1, A1, P1
Secure Download: Enable
MOM MODE. CAN'T DOWNLOAD (<--- Added in red each time Odin fails)
Is the phone toast?
Thanks!
1.Try doing wipe data before flashing the firmware.
2.Try flashing Stock LP firmware.
3.Try to flash using Heimdall, which doesn't have some restrictions that Odin has.
4.Nand erase all option in odin might help a bit.
5.If none of these works i guess you need to flash the device using Z3x box or jtag. Go ye visit a samsung service and hopefully they manage to fix your problem.
JayFivehundred said:
Hi there,
I wanted to put Cyanogenmod on an J500FN and went straight to Odin without enabling developer options Why? Bc I am dumb.
Since Odin failed I cant even get into recovery mode. Can't enter a password. Can't do anything, really.
Normal start and Recovery Mode start result in the screen showing the Android logo and then turning yellow/green before fading to black.
Download mode is working. I tried Kies, Smart Switch, Odin. Each time it fails and a read line on the phone appears ("Mom Mode. Can't Download"). Using stock firmware from Sammobile results in the same outcome.
Download mode says:
ODIN MODE
PRODUCT NAME: SM-J500FN
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FRP Lock: Off
WARRANTY VOID: 0x0
RP SWREV: S1, T1, H1 R1, A1, P1
Secure Download: Enable
MOM MODE. CAN'T DOWNLOAD (<--- Added in red each time Odin fails)
Is the phone toast?
Thanks!
Click to expand...
Click to collapse
Send it to me if you are gonna throw it away
JayFivehundred said:
Hi there,
I wanted to put Cyanogenmod on an J500FN and went straight to Odin without enabling developer options Why? Bc I am dumb.
Since Odin failed I cant even get into recovery mode. Can't enter a password. Can't do anything, really.
Normal start and Recovery Mode start result in the screen showing the Android logo and then turning yellow/green before fading to black.
Download mode is working. I tried Kies, Smart Switch, Odin. Each time it fails and a read line on the phone appears ("Mom Mode. Can't Download"). Using stock firmware from Sammobile results in the same outcome.
Download mode says:
ODIN MODE
PRODUCT NAME: SM-J500FN
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FRP Lock: Off
WARRANTY VOID: 0x0
RP SWREV: S1, T1, H1 R1, A1, P1
Secure Download: Enable
MOM MODE. CAN'T DOWNLOAD (<--- Added in red each time Odin fails)
Is the phone toast?
Thanks!
Click to expand...
Click to collapse
have you read this post https://forum.xda-developers.com/galaxy-j5/how-to/how-to-unbrick-galaxy-j5-sm-j500h-t3536287
100% it s something that you can do to fix it .. Just search hard i had problems like this on many phones ( not booting and things like that) and i fixed them after some google .. all i can say is Good Luck mate Ps:don t throw it..
EDIT
My bad didnt read your full post.
I was gonna mention Smart_Switch_PC_Setup
Thanks everyone for your comments and suggestions
I have tried everything I could think of and read about. Unfortunately, there was no debrick image for the model I need.
Ultimately, after days of extensive searching and trying, I give up at this point.
Either way, great forum, and thanks again for all the comments!
JayFivehundred said:
Thanks everyone for your comments and suggestions
I have tried everything I could think of and read about. Unfortunately, there was no debrick image for the model I need.
Ultimately, after days of extensive searching and trying, I give up at this point.
Either way, great forum, and thanks again for all the comments!
Click to expand...
Click to collapse
Send it to me