Database Users

N910F problems

Sooo it's about 3 days that I'm having problems with my Samsung Note 4.
The phone is about 6 months old and I tried to root it when I bought it without success, so I put the original firmware again (As after successful (or insuccessful?) rooting the phone keept bootlooping all the time). With a few tricks (that I cant remember) i made it working again.
3 days ago I was charging the phone while browsing on google chrome and the phone suddenly turned off and went in a bootloop. I tried installing the original firmware again (Odin says "PASS!" at the end of the process) but it still wont go work. Tried to wipe cache and data, still nothing. Samsung Kies wont recognize my phone to do an emergency recovery.
Another strange thing is that I can enter in download mode but not in recovery mode.
"ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0x1 (4)
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
SECURE DOWNLOAD : ENABLE
UDC START"
That's what it says in download mode and have no idea what it means.
Anyone can help? Im about to freak out
Thanks in advance

Anyone?

Still none? Im using my phone as paperweight right now..

alpacino15 said:
Still none? Im using my phone as paperweight right now..
Click to expand...
Click to collapse
Are you using genuine usb cable? it's a must. Also do NOT use USB 3 port

I9506 problem after trying to root and flash Soft brick

Hello,
I'm having a bad issue with my phone. GS4 gt i9506 norwegian version... I have downloaded the I9506XXUBML6 stock firmware and lollipop version for the phone trying to get it working again. DL mode says:
ODIN MODE
Product name: gt-i9506
current binary: Samsung official
system status: official
Knox kernel lock: 0x0
Knox warranty void: 0x1
Qualcomm secureboot: enable
Rp Swrev: S1, T1, R1, A1, P1
Write protection: enable
UDC START
When in odin and trying to put in firmware it just gets stuck.
Problems started after using auto root.
Most likely you will need more information
Thanks in advance

can you post the log of odin?
also when flashing with odin tar.md5 you need to wait like 3 or 4 minutes depends on your pc in order to start flashing.

Hello again,
I actually fixed the phone already so I will only tell what I did. The log file abruptly ended in the middle transiting data. No error. This led me to believe:
a) error with the file (wrong image?)
b) problem with usb port or cord
B was easier to solve. First went through all the ports on my laptop. All 3 of them. No change. Then changed the cord to a new one(newer). Neither of these worked so I asked my gf to nicely lend her desktop with marvelous 9 usb ports. :angel: Moved files to usb stick (thank you usb3) with odin in it too(so I will know whether it's a or b) Downloaded samsung drivers.
Phone connected. Files moved to D. Odin start. Connection! AP selected. Wait 15 min and come back. Phone is working. OTA lollipop incoming.
Thank you for your quick reply,
Hope this post will help someone else
Don't Panic

Need help with a soft-bricked SM-T337V

My company issues the Verizon flavor of Galaxy Tab 4 8.0 for our users that are out in the field. It seems like this one particular user (or someone close to them) decided to try and root the device in order to get around the restrictions we have on them via a MDM client. When the tablet boots (even when trying to go into recovery via power+home+volume up) it goes to the triangle screen saying "System software not authorized by Verizon Wireless has been found. Please turn off and go to the nearest Verizon store". But unfortunately the store turned us away saying there's not much they can do. I am able, however, able to get it into download mode.
So far I've tried flashing the Verizon Stock 4.4.4 firmware, which I found searching around here, via Odin 3.10.7. It gives every indication that the process completed and shows the green "PASS" block up top. When the tablet reboots from flashing, it still goes to the triangle screen. Once the triangle screen comes up, upon reboot there's a lock at the bottom of the boot screen and the word "Custom", shown here: http://i.imgur.com/5PC0qeZ.jpg. It seems like maybe the bootloader isn't correctly being overwritten or something. When the tablet is in download mode, it says the following in the top left (after I've already flashed it a few times):
Odin Mode
Product name: SM-T337V
Current Binary: Custom
System Status: Official
Reactivation Lock(KK): Off
Qualcomm Secureboot: Enable (CSB)
RP SWREV: S1, T1, R1, A2, P1
Secure Download: Enable
UDC Start
I'd like to think I'm not a total novice with this stuff, but I'm at a bit of a loss at the moment. Where should I go from here? I've read from a different thread about the note 3 that sometimes you have to flash the .pit file again in order to nuke the partitions, but so far I haven't been able to find one I feel comfortable enough to try.

note 4 SM-N910A black screen with blue notification light after samsung boot

Hi,
i'm having some trouble with my note 4. so i recived the note from a friend and she told me what was the problem. the problem is that she would turn it off then when she trys to attempt to turn it back on it will show the samsmung boot screen then all black with the blue and white(maby baby blue, i cant tell exacly)and sometimes boots a 2nd or 3rd time. leave it like that and the phone would start getting hot. so i used odin and installed a freash BL, CP, and CSC. then i left the phone withpout the battery for about 10 minute's then i put the battery back on and turned it on. it worked! but after a while i accidentaly turned it off. the same problem was back(i dont know if this is important but when ever u tryed to update the software it would alway's fail). so i thought why dont i just install freash clean OS and i whont have to face this problem again. i installed android 5.0.1 and it did not work, this time the blue adn white notification light was not on. so i installed it again but only the BL. the light was back. please help me on what to do or give me a link to a legitament clean OS. i've tryed every trick! pull out the battery then press and hold the power button to drain out the ramining power and leave the phone for about 10 min. try to go in recovery mode(when i try to do this, it goes all black also), install a clean freash OS, ECT. im running out of options! what should i do! it cant be the hardware because everything was working fine. it cant be the screen because i've personally seen the screen work perfectly fine, plus the samung boot logo( the "samsung galaxy note 4 powered by android" boot). i dont know what to do!

Reboot into download mode and see what firmware is on it. then download the latest MM 6.0.1 firmware and flash it with odin. Depending on the model, the BL may be locked to prevent flashing older firmware. If that doesn't work you may have to flash a pit file with the firmware but that is last resort. If you can take a picture of what download mode says and post it here it would be way easy to help you fix it bro

noob4598 said:
Reboot into download mode and see what firmware is on it. then download the latest MM 6.0.1 firmware and flash it with odin. Depending on the model, the BL may be locked to prevent flashing older firmware. If that doesn't work you may have to flash a pit file with the firmware but that is last resort. If you can take a picture of what download mode says and post it here it would be way easy to help you fix it bro
Click to expand...
Click to collapse
imsorry but i am unable to post a link nor a picture due me being a new user.
but it does say this:
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910A
CURRENT BINARY: SAMSUNG OFFICAIL
SYSTEM STATUS: OFFICIAL
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0X0
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T2, R1, A2, P1
SECURE DOWNLOAD: ENABLE
UDCSTART

Mmc_read failed

Can someone help me please. My phone is in ODIN mode, I'm very dumb when it comes to phones and computers, can anyone offer a solution.
ddi: mmc_read failed
ODIN MODE
Product name: SM-G360T1
Current Binary: Samsung official
SystemStatus: custom
FAO Lock: on
Qualcomm secure boot: enable (csb)
AP Sswrev: s1, t1, h1, a1, a1, p1

At first change the battery or buy a new one.
After its not work flash stock firmware

I know this thread is old but i can help you
First of all maybe the battery is so drained it cant read the nand due to lack of energy. Try charging it for a few hours or overnight. If it dosent do anything at all, change the battery. If it still dosent work, go to the next step
If the above method dosent work, Try flashing the stock ROM using Odin.
If it still dosent work, your device is bricked