Hi Guys,
After many days of search and trials I have managed to enable VoLTE in Xperia Z2 & Z3 in Android 6.0.1.
But this Method should work on Newer Z & X series models(till 2018).
Only For Xperia Z & X series
Your carrier must support VoLTE service and it should not be locked to certain devices by your carrier.
This method Only works on stock roms.
Tested and working !
Operator- Idea, Reliance Jio [India]
Thanks to @jitz975 @Dilesh Perera @kevev @tititoto
Try at your own risk.
Always make a backup of system and data before doing this in case anything goes wrong
Follow these steps,
1. Root Access and Recovery are mandatory.
2. Download & flash VoLTE .zip via recovery(only for Xperia Z2 & Z3).
3. Find this line in /system/build.prop [ro.build.type=user] & change it to [ro.build.type=userdebug] then restart phone.
4. Then u have to find the modem switcher.
its in system/priv-app and its called CustomizationSelector.apk
> download Quick shortcut maker from play store
> open Quick shortcut maker to make a shortcut using the app then go to customisation Selector \ modem switcher
> open Customization Selector app and select modem according to your network operator.
> if u dont find your operator just select volte_base_operator_trials_tar.
> try other ims modems if any of these wont work.
> if it wont work even after then try another stock Android rom from xperifirm flashtool.
5.. After selecting modem, phone will restart and you are good to go.
Not work indonesian hahahaha
vandiaz_sairavinz said:
Not work indonesian hahahaha
Click to expand...
Click to collapse
Maybe your carrier does not support VoLTE?
vandiaz_sairavinz said:
Not work indonesian hahahaha
Click to expand...
Click to collapse
Try to do all steps in correct way.
Carrier must support VoLTE or else it wont work.
Sony Xperia Z2 (D6503) Android 6.0.1
Thanks alot mate its working
akshay2shah said:
Try to do all steps in correct way.
Carrier must support VoLTE or else it wont work.
Sony Xperia Z2 (D6503) Android 6.0.1
Click to expand...
Click to collapse
I already follow the steps above
vandiaz_sairavinz said:
I already follow the steps above
Click to expand...
Click to collapse
Did u change overlay apps and set app permission to rwrr ??
Did u add line lines in build.prop ?
Try to switch another modem and then again switch to VoLTE modem. It works.
akshay2shah said:
Did u change overlay apps and set app permission to rwrr ??
Did u add line lines in build.prop ?
Try to switch another modem and then again switch to VoLTE modem. It works.
Click to expand...
Click to collapse
yes add build.prop and permission
I've tried all the same German modem ,,,
Indonesian carriers seemed not supported volte
thanks for his tutorial ...
nice :fingers-crossed:
vandiaz_sairavinz said:
yes add build.prop and permission
I've tried all the same German modem ,,,
Indonesian carriers seemed not supported volte
thanks for his tutorial ...
nice :fingers-crossed:
Click to expand...
Click to collapse
Now agin switch back to VoLTE based trial modem.
If it wont work then your carrier doesnt support VoLTE..
VoLTE is a Carrier dependent service. if ur carrier not supports u wont get anything other than the toggle in settings
VoLTE is one of the coolest services comes with 4G
im waiting with the toggle until my carrier launch the service Lol
I did all, and started launching the customization settings app but it opens and close right after and can enter to the modem settings somehow
Sent from my D6603 using XDA-Developers mobile app
dontbelive said:
I did all, and started launching the customization settings app but it opens and close right after and can enter to the modem settings somehow
Sent from my D6603 using XDA-Developers mobile app
Click to expand...
Click to collapse
Read and do step no 5.
Your problem will be solved. ?
akshay2shah said:
Read and do step no 5.
Your problem will be solved. ?
Click to expand...
Click to collapse
Still doesn't work, I repeat step 5 and still nothing
I repeat all steps and still can't open the settings,
Hmm u think it's the app problem?
Sent from my D6603 using XDA-Developers mobile app
dontbelive said:
Still doesn't work, I repeat step 5 and still nothing
I repeat all steps and still can't open the settings,
Hmm u think it's the app problem?
Sent from my D6603 using XDA-Developers mobile app
Click to expand...
Click to collapse
Did u restart phone after changing it to usedebug ?
akshay2shah said:
Did u restart phone after changing it to usedebug ?
Click to expand...
Click to collapse
Yes, tried all, but app opens, screens is blue for milliseconds but then it close without any forceclose pop up or else, just open and right after close
Sent from my D6603 using XDA-Developers mobile app
It seems not to work for me too. All settings are made exactly like in the description. Modem selected and use volte option is enabled in settings too. Carrier is Telekom_de which supports volte also volte option is enabled in contract.
Best
Hans_Werner said:
It seems not to work for me too. All settings are made exactly like in the description. Modem selected and use volte option is enabled in settings too. Carrier is Telekom_de which supports volte also volte option is enabled in contract.
Best
Click to expand...
Click to collapse
Your carrier locked VoLTE to certain xperia model.
Cant help with that.
In your case VoLTE access is restricted from network side.
Remaining settings are correct by these method
Thanks for the info. Very disappointed ?
Gesendet von meinem D6503 mit Tapatalk
Hans_Werner said:
Thanks for the info. Very disappointed ?
Gesendet von meinem D6503 mit Tapatalk
Click to expand...
Click to collapse
did u check by selecting and changing the modem for different modem ( telekom to base trials ) ?
Hans_Werner said:
Thanks for the info. Very disappointed ?
Gesendet von meinem D6503 mit Tapatalk
Click to expand...
Click to collapse
If in your contact VoLTE enabled then do these steps again
1. Select any other modem
2. then again select VoLTE base trial modem.
Related
Hi
Can someone make a flashable zip mod for the wireless storage from the korean lollipop roms?
It has been removed from the european lollipop stock rom.
Thanks in advance
+1
Thanks in advance
AT&T user here just wishing there WAS a stock ROM that would be helpful
Cienight said:
Hi
Can someone make a flashable zip mod for the wireless storage from the korean lollipop roms?
It has been removed from the european lollipop stock rom.
Thanks in advance
Click to expand...
Click to collapse
U don't need it.
I solved the same need with an app from Google play.
https://play.google.com/store/apps/details?id=com.funkyfresh.samba
(root needed)
Same usage. [emoji2]
Cienight said:
Hi
Can someone make a flashable zip mod for the wireless storage from the korean lollipop roms?
It has been removed from the european lollipop stock rom.
Thanks in advance
Click to expand...
Click to collapse
+1 yes please guys, wireless storage was one of the most usefull feature of stock.
Now there is no wireless storage on lollipop and i need to connect everytime with usb cable
I tried 3rd party apps but it seems thay all need that phone and pc are connected to the same network, wireless storage worked also with hotspot/tethering
I NEED SOMETHING THAT WORK WITHOUT WIFI NETWORK!
Fast file trasfert is able to send data but not receive befause it need the premium version
All type of "wifi file transfert" that are on play store need that phone and pc are in the same wifi network and using hotspot, wifi switch off so they arent usefull for me
Superbeam is able to send and receive but all zip with heavy size seems are damaged -.+ so not usefull...
If someone find something please share PLEASE
4Freedom said:
+1 yes please guys, wireless storage was one of the most usefull feature of stock.
Now there is no wireless storage on lollipop and i need to connect everytime with usb cable
I tried 3rd party apps but it seems thay all need that phone and pc are connected to the same network, wireless storage worked also with hotspot/tethering
I NEED SOMETHING THAT WORK WITHOUT WIFI NETWORK!
Fast file trasfert is able to send data but not receive befause it need the premium version
All type of "wifi file transfert" that are on play store need that phone and pc are in the same wifi network and using hotspot, wifi switch off so they arent usefull for me
Superbeam is able to send and receive but all zip with heavy size seems are damaged -.+ so not usefull...
If someone find something please share PLEASE
Click to expand...
Click to collapse
Missing one advantage........ ability in file manager mapping the phone has a Network Drive!!!
@xdabbeb how did you re-add the feature on your 5.0 ROM?
metteduch said:
@xdabbeb how did you re-add the feature on your 5.0 ROM?
Click to expand...
Click to collapse
Yup he did. It would be awesome if someone could make a flashable zip for the d802 users
http://forum.xda-developers.com/showthread.php?p=57849978
Sent from my LG-D802 using Tapatalk
Cienight said:
Yup he did. It would be awesome if someone could make a flashable zip for the d802 users
http://forum.xda-developers.com/showthread.php?p=57849978
Sent from my LG-D802 using Tapatalk
Click to expand...
Click to collapse
We need someone to mod framework to add a toggle.
Enviado do meu LG-D802 através de Tapatalk
It's not working though it crashes
Sent from my LG-D802 using Tapatalk
I copied the files to priv-app, set the right permissions and rebooted. Wireless storage appears in the settings menu but it is not working.
View attachment 3247908View attachment 3247909View attachment 3247910
GreatVortex said:
I copied the files to priv-app, set the right permissions and rebooted. Wireless storage appears in the settings menu but it is not working.
View attachment 3247908View attachment 3247909View attachment 3247910
Click to expand...
Click to collapse
Missing some libs?!
Try to wip cache...
Enviado do meu LG-D802 através de Tapatalk
another vote for this, this killer feature needs to be back!
GreatVortex said:
I copied the files to priv-app, set the right permissions and rebooted. Wireless storage appears in the settings menu but it is not working.
View attachment 3247908View attachment 3247909View attachment 3247910
Click to expand...
Click to collapse
can you upload me the logcat? maybe i can fix
Here you have it.
View attachment Log_2015-04-07_11-25-22.txt
exiled31 said:
U don't need it. https://play.google.com/store/apps/details?id=com.funkyfresh.samba
Same usage.
Click to expand...
Click to collapse
not work
GreatVortex said:
Here you have it.
View attachment 3249784
Click to expand...
Click to collapse
it seems that it find wireless storage, but it cant run it because there is no interface method in /system/framework/framework.jar did you copy it from the rom with working wireless storage? and is it lollipop stock based right?
Strange.. I used samba on kitkat, and now on lp
exiled31 said:
Strange.. I used samba on kitkat, and now on lp
Click to expand...
Click to collapse
Should i do something else? After i installed and i give root e permission from supersu?
4Freedom said:
not work
Click to expand...
Click to collapse
Selinux permissions?!
vladmir said:
Selinux permissions?!
Click to expand...
Click to collapse
It can be, i didnt look at it
Hey everyone. After rooting s219, by changing some lines in build prop we can see volte feature in network settings.
But no volte symbol in status bar
Paste these lines in build prop. I can't see volte symbol may be due Vodafone. Those who has jio please let me know if it works in s219 with root.
ro.mtk_volte_support=1
persist.mtk.volte.enable=1
persist.dbg.volte_avail_ovr=1
Thanks
No it's not working with jio
sharan565 said:
No it's not working with jio
Click to expand...
Click to collapse
So by adding these line you don't have volte enable option in network setting. ? or it just changes from 4g to H+ when calling?
I have attached 3 more files which are extracted from s208 ota, add them in system/bin/ and give permissions like rwxr-xr-x with ex file explorer. these files were missing in s219 update. i am not sure about the permissions. sad part is that i am not getting jio sim for testing. that's why i need your helps.
Pls let me know the result.
iamironman91 said:
So by adding these line you don't have volte enable option in network setting. ? or it just changes from 4g to H+ when calling?
I have attached 3 more files which are extracted from s208 ota, add them in system/bin/ and give permissions like rwxr-xr-x with ex file explorer. these files were missing in s219 update. i am not sure about the permissions. sad part is that i am not getting jio sim for testing. that's why i need your helps.
Pls let me know the result.
Click to expand...
Click to collapse
With default dailer calls are not going. Calls ends automatically.
sharan565 said:
With default dailer calls are not going. Calls ends automatically.
Click to expand...
Click to collapse
Oh, not had this problem, probably add those files and see if you can make calls and restart phone. because i thought only editing build prop will enable volte. seems those files also needed.
I added them along with changing build prop lines. and i was able to make call too.
iamironman91 said:
Oh, not had this problem, probably add those files and see if you can make calls and restart phone. because i thought only editing build prop will enable volte. seems those files also needed.
I added them along with changing build prop lines. and i was able to make call too.
Click to expand...
Click to collapse
Can you show permissions Screenshot
And you are making volte calls with Vodafone?
No, Vodafone doesn't support volte at the moment in India seems. I called customer care. Don't know that guy knows about volte or not.. So I am not sure whether it's working or not. I can make Normal calls.
U were asking this seems
iamironman91 said:
U were asking this seems
Click to expand...
Click to collapse
Still no luck
sharan565 said:
Still no luck
Click to expand...
Click to collapse
ok. i just tried with my friend sim card. i am also not able to make call. seems there is something else missing.
iamironman91 said:
ok. i just tried with my friend sim card. i am also not able to make call. seems there is something else missing.
Click to expand...
Click to collapse
I don't think it's not that easy task to get volte. But you tried.
sharan565 said:
I don't think it's not that easy task to get volte. But you tried.
Click to expand...
Click to collapse
yes someone can help us. Also i think there should be some UI to show on status bar. :good:
sharan565 said:
Still no luck
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=_GeeLrVPm2s
can you try this apn settings once?
Volte feature in k4 note does not have to do anything in system partition. Its relevent files and settings are somewhere in data or some other partition.
I am saying this because I am using s208 build which supports volte but if I wipe data and internal storage, volte stops working. So, it has to do something with partition other than system.
plzzz sr @Zormax
iamironman91 said:
Hey everyone. After rooting s219, by changing some lines in build prop we can see volte feature in network settings.
But no volte symbol in status bar
Paste these lines in build prop. I can't see volte symbol may be due Vodafone. Those who has jio please let me know if it works in s219 with root.
ro.mtk_volte_support=1
persist.mtk.volte.enable=1
persist.dbg.volte_avail_ovr=1
Thanks
Click to expand...
Click to collapse
After rooting Row S219? Is there a root for S219 i tried the guides in rooting my s219 k4 note I end up with bootloop.
Follow this link. One of best guide. Easily understandable. Let me know if it helps. First flash s219 build properly with sp tools before beginning the rooting procedure.
DOWNLOAD
norbarb said:
Download :
N950USQS2BQK2
Click to expand...
Click to collapse
Fastest gun on the servers....
I'm having trouble getting all 5 files to load. The 5th choice is greyed out. Where to out UserData etc?
ekerbuddyeker said:
I'm having trouble getting all 5 files to load. The 5th choice is greyed out. Where to out UserData etc?
Click to expand...
Click to collapse
use this oden https://androidfilehost.com/?fid=817550096634787635
OP link removed? Is there another option to get back to stock if giving Oreo a whirl?
kangi26 said:
OP link removed? Is there another option to get back to stock if giving Oreo a whirl?
Click to expand...
Click to collapse
I updated my links in my main thread until link is updated:
https://forum.xda-developers.com/ga...m-n950u-u1-t3685884/post74087340#post74087340
BlueFox721 said:
I updated my links in my main thread until link is updated:
https://forum.xda-developers.com/ga...m-n950u-u1-t3685884/post74087340#post74087340
Click to expand...
Click to collapse
Thx allot.. Just what I was looking for.. Was thinking bout trying Oreo.. Wanted to make sure I had what I needed to downgrade just incase.. Thx bro
Sent from my Samsung Galaxy Note8 using XDA Labs
Video calling and WiFi calling disabled
Hi. I'm new to rooting and all that. Have a note 8 att unlocked but I can't video call anyone using stock video calling; My note 3 could easily. Anyway i can resolve this?
Shushu_anaafi said:
Hi. I'm new to rooting and all that. Have a note 8 att unlocked but I can't video call anyone using stock video calling; My note 3 could easily. Anyway i can resolve this?
Click to expand...
Click to collapse
Try this:
EpdgTestApp in shortcut master lite- launch
- EpdgMainActivity - launch
- select menu dots top right
- select activation settings
- select combination of options you want
com.test.LTEfunctionality in shortcut master lite- launch
- LTEFunctionalityTest- launch
- VoLTE Test UI - select
- Set N/W PS voice support - turn on
- Set N/W PS E911 support - turn on
IMS Settings in shortcut master lite- launch
- ImsSettingsLauncherActivity - launch
- IMS Service Switch - select, enable all
- IMS Profile - select
- "Your Carrier" IMS - select
- Service - select
- ensure the radios are selected for mmtel, mmtel-video, and smsip (other settings break features but play if you want...)(mmtel-video is video calling) for both sections, top and bottom...back out once and click the save icon (looks like floppy)
Bless you...hi there... followed everything . The video call button now shows in the dial pad ... but says "video call unavailable" when i try it.
I am still playing with things myself...it only works if the other device has it enabled as well...the AT&T network may have another setting somewhere...you could flash the complete AT&T firmware and have full features
BlueFox721 said:
I am still playing with things myself...it only works if the other device has it enabled as well...the AT&T network may have another setting somewhere...you could flash the complete AT&T firmware and have full features
Click to expand...
Click to collapse
Forest it says this...
ISIM information is not valid.
- DEBUG INFO > ISIM Info
Then in the profile....
SAMSUNGMDMN
Any changes I make in the service or anywhere formats. mmtel-video keeps in checking even after I check it and save
BlueFox721 said:
I am still playing with things myself...it only works if the other device has it enabled as well...the AT&T network may have another setting somewhere...you could flash the complete AT&T firmware and have full features
Click to expand...
Click to collapse
Sadly I have no idea how to flash. I'm new to this ??
Shushu_anaafi said:
Sadly I have no idea how to flash. I'm new to this ??
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-note-8/how-to/guide-sm-n950u-u1-t3685884
BlueFox721 said:
https://forum.xda-developers.com/galaxy-note-8/how-to/guide-sm-n950u-u1-t3685884
Click to expand...
Click to collapse
Bless you. Will give it a go. I'll keep you posted. Cheers:good:
how to use this archive? I downloaded and it has several tar files, we need to extract them first and then use ODIN? Possible to do in MAC? The one I downloaded for mac says not compatible w/ my OS version.
coolguy said:
how to use this archive? I downloaded and it has several tar files, we need to extract them first and then use ODIN? Possible to do in MAC? The one I downloaded for mac says not compatible w/ my OS version.
Click to expand...
Click to collapse
Try this site out:
http://rootmygalaxy.net/install-odin-jdoin3-for-mac-osx/
Thanks ,figured out w/ this link in google "note 8 carrier flashing" , it was all step by step for Windows, fortunately, had a windows laptop lying around. They should also make ODIN doesn't work w/ USB 3.0 ports, I had to switch to USB 2.0 for it to recognize.
coolguy said:
Thanks ,figured out w/ this link in google "note 8 carrier flashing" , it was all step by step for Windows, fortunately, had a windows laptop lying around. They should also make ODIN doesn't work w/ USB 3.0 ports, I had to switch to USB 2.0 for it to recognize.
Click to expand...
Click to collapse
For usb 3.0 you need a quality or original cable...I flash all mine with the usb 3.0...it's faster...but I use an expensive cable...
Hmmm I am using original 3.0 cable came w/ samsung or google pixel too.
Hello guys.
This is a magisk module created by me. It installs U-health on android Oreo custom ROMs systemlessly.
Requirements:
Magisk 15.0 or above
Android 8.0 or above.
Installation:
To install this module open the magisk manager app, then go to modules tab from side menu and click the plus icon and select this module file from the download folder.
Download link:- U-health4magisk
Credits
Mja123
Thanks brother
Working great, thank u. But how to add it ro the homescreen like in zui.
flash123nani said:
Working great, thank u. But how to add it ro the homescreen like in zui.
Click to expand...
Click to collapse
You can't do that in pixel launcher. It requires zui launcher
Sensor is not detected, only use of camera
Sent from my Z2 Pro using Tapatalk
Works fine in aicp latest..
Every sensor is working. And pedometer is accurate also like in zui
vickdu31 said:
Sensor is not detected, only use of camera
Click to expand...
Click to collapse
Do we have heart rate sensor?
I can't log in here
The only option to sign up is via phone number
And they are always saying that my phone number format is wrong
Give a way out plz
Sent from my Z2 Plus using Tapatalk
Sometime app crashes in heart beat monitor mode.
BTW @mja123 are u on telegram?
How can I make support for MI Band 2 in U-health? Whoever managed to connect the band to U-health?
Heart sensor
But, does heart sensor work or not?
Arya04 said:
I can't log in here
The only option to sign up is via phone number
And they are always saying that my phone number format is wrong
Give a way out plz
Sent from my Z2 Plus using Tapatalk
Click to expand...
Click to collapse
I am facing the same issue. Can anyone tell how to solve this?
Sent from my Z2 Plus using Tapatalk
Souvikhazra80 said:
Sometime app crashes in heart beat monitor mode.
BTW @mja123 are u on telegram?
Click to expand...
Click to collapse
No I don't use telegram
manojchs said:
I am facing the same issue. Can anyone tell how to solve this?
Sent from my Z2 Plus using Tapatalk
Click to expand...
Click to collapse
Can you please attach screenshot?
sensei_serega said:
How can I make support for MI Band 2 in U-health? Whoever managed to connect the band to U-health?
Click to expand...
Click to collapse
U can try pairing it from 'my device' in the app
mja123 said:
Can you please attach screenshot?
Click to expand...
Click to collapse
Thanks for your work. These are the screenshots. The app force closes when I try to use quick login with mobile number. When I try to sign up with mobile number, I get the format error whether I use the 10 digit phone number or use 0 followed by number. When I try to add country code in front of the number, I get the 11 digit length error.
Hope this helps. Let me know if I can help further.
manojchs said:
Thanks for your work. These are the screenshots. The app force closes when I try to use quick login with mobile number. When I try to sign up with mobile number, I get the format error whether I use the 10 digit phone number or use 0 followed by number. When I try to add country code in front of the number, I get the 11 digit length error.
Hope this helps. Let me know if I can help further.
Click to expand...
Click to collapse
Does this window appears right after clicking the "login lenovo id"? Which ROM are you using?
mja123 said:
Does this window appears right after clicking the "login lenovo id"? Which ROM are you using?
Click to expand...
Click to collapse
No, after clicking "login Lenovo ID", there are three options,
1. Quick login via this phone number
2. Sign up
3. Login
App crashes & restarts when I choose the first option.
The format errors occur when I chose 2nd option and enter my phone number to sign up. I haven't tested 3rd option as I don't have a Lenovo account yet.
I am using the latest build of AEX Oreo ROM (19 Feb build).
Sent from my Z2 Plus using Tapatalk
manojchs said:
No, after clicking "login Lenovo ID", there are three options,
1. Quick login via this phone number
2. Sign up
3. Login
App crashes & restarts when I choose the first option.
The format errors occur when I chose 2nd option and enter my phone number to sign up. I haven't tested 3rd option as I don't have a Lenovo account yet.
I am using the latest build of AEX Oreo ROM (19 Feb build).
Sent from my Z2 Plus using Tapatalk
Click to expand...
Click to collapse
Oh I see. I have not tested sign up and phone login options because I have a lenovo account. You can simply sign up here and then select sign in option.
mja123 said:
Oh I see. I have not tested sign up and phone login options because I have a lenovo account. You can simply sign up here and then select sign in option.
Click to expand...
Click to collapse
Thanks, that worked perfectly. [emoji4]
Sent from my Z2 Plus using Tapatalk
THIS GUIDE WILL HELP YOU FORCE ENABLE VOLTE ICON SWITCH .WHICH BLOCKED BY HUAWEI SOFTWARE.
IN THIS GUIDE VOLTE ONLY WORKS IF YOUR PHONE AND NETWORK SUPPORT VOLTE.
EXAMPLE MY SIDE MY CARRIER IN INDIA SUPPORT ONLY VOLTE FOR VOICE.BUT FOR HUAWEI OVERSEAS PHONES HUAWEI DISABLED VOLTE FOR MY COUNTRY.THEY ONLY ENABLED VOLTE WHICH SOLD EXCLUSIVE TO THAT COUNTRY.
STEP:
1)UNCLOCK THE BOOTLOADER AND ENABLE OEM UNLOCK
2))ROOT YOUR MOBILE USING SUPER USER OR MAGISK.IF U GOING ROOT THROUGH MAGISK INSTALL ES FILE EXPLORER AND ROOT CHECKER BEFORE ROOT.IF U ROOT THROUGH MAGISK YOU WON T LOOSE AI.BUT WIFI HAS SOME ISSUES.
3)AFTER ROOTING ENABLE PERMISSION IN ROOT EXPLORER.
4)GO TO DEVICE,SELECT SYSTEM,IN SYSTEM SELECT VENDOR,IN VENDOR SELECT BUILD.PROP.
IN BULID.PROP YOU FIND THE LINE COMMAND ro.config.hw_volte_on=true.
ADD THIS COMMAND LINE ro.config.hw_volte_dyn=false BELOW ro.config.hw_volte_on=true line.
it should be like this ro.config.hw_volte_on=true
ro.config.hw_volte_dyn=false
AFTERADDING SAVE AND REBOOT YOUR PHONE.[/YOUTUBE][/YOUTUBE]
I ALSO ADDED VIDEO.
KINDLY TRY AND UPLOAD SCREENSHOT BELOW AFTER U GET SUCCESSFUL ENABLING VOLTE ICON SWITCH.
THANKS MANKINDTW FOR MAGISK ROOT SUPPORT
YOUTUBE LINK https://www.youtube.com/watch?v=aUfmiDBPczw&t=91s
Dream comes true!
Finally waiting is over, we can use VoLTE.
In search of VoLTE more than thirty roms I have flashed on my mate.
Here it is....:good:
Thanks,
goldybewon
Mate - 9
goldybewon said:
Finally waiting is over, we can use VoLTE.
In search of VoLTE more than thirty roms I have flashed on my mate.
Here it is....:good:
Thanks,
goldybewon
Mate - 9
Click to expand...
Click to collapse
Did u tried jio sim
YES>> ~)
truthteller609 said:
Did u tried jio sim
Click to expand...
Click to collapse
Yes it worked on both sims.:good:
You made an Universal guide for Huawei & Honor phones.
Now a days I am riding on Mate - 10 (Mate-9 is with my bro) and not using ji0.
Thanks,
goldybewon
Mate-10
VoLTE just works on my Mate 9 running Oreo. I've not had to change anything.
Sent from my MHA-L29 using Tapatalk
goldybewon said:
Yes it worked on both sims.:good:
You made an Universal guide for Huawei & Honor phones.
Now a days I am riding on Mate - 10 (Mate-9 is with my bro) and not using ji0.
Thanks,
goldybewon
Mate-10
Click to expand...
Click to collapse
Hey man which version firmware are you using getting volte option but volte icon not coming after enable
Not Firmware
hijibiji said:
Hey man which version firmware are you using getting volte option but volte icon not coming after enable
Click to expand...
Click to collapse
I was on C567 latest firmware.
It's not enable by default but after adding line in built prop.
Follow guide by OP...
Did you see my posts with screenshots?
Thanks
goldybewon
Mate-10
goldybewon said:
I was on C567 latest firmware.
It's not enable by default but after adding line in built prop.
Follow guide by OP...
Did you see my posts with screenshots?
Thanks
goldybewon
Mate-10
Click to expand...
Click to collapse
I follow the steps and its enabled but call not working and no volte icon, and i am using mate 9 pro
goldybewon said:
Yes it worked on both sims.:good:
You made an Universal guide for Huawei & Honor phones.
Now a days I am riding on Mate - 10 (Mate-9 is with my bro) and not using ji0.
Thanks,
goldybewon
Mate-10
Click to expand...
Click to collapse
I think it's disable by hardware
hijibiji said:
I follow the steps and its enabled but call not working and no volte icon, and i am using mate 9 pro
Click to expand...
Click to collapse
It is disabled by hardware
truthteller609 said:
It is disabled by hardware
Click to expand...
Click to collapse
You should hardware also
truthteller609 said:
You should hardware also
Click to expand...
Click to collapse
mate 9 pro support volte
hijibiji said:
mate 9 pro support volte
Click to expand...
Click to collapse
Download setting database editor in play store install it, go to android properties..
Which ever written about VoLTE...LIKE THIS
Strange?
truthteller609 said:
It is disabled by hardware
Click to expand...
Click to collapse
Why VoLTE working with other user and not with him?
I think it's not integrated with rom that's why VoLTE enabled but not working.
By the way he is using Mate Pro which is also makes difference. And one thing more like face unlock woring with some and some not.
Thanks
goldybewon
Mate-10
truthteller609 said:
Download setting database editor in play store install it, go to android properties..
Which ever written about VoLTE...LIKE THIS
Click to expand...
Click to collapse
Find ro.config.volte=true or false
goldybewon said:
Why VoLTE working with other user and not with him?
I think it's not integrated with rom that's why VoLTE enabled but not working.
By the way he is using Mate Pro which is also makes difference. And one thing more like face unlock woring with some and some not.
Thanks
goldybewon
Mate-10
Click to expand...
Click to collapse
May be its depend on firmware and regions
I can't edit with setting database editor, and there is no ro.config.volte=* line
hijibiji said:
I can't edit with setting database editor, and there is no ro.config.volte=* line
Click to expand...
Click to collapse
You can t edit setting database editor...You need add in build.prop through es file explorer
My updates allow it on my MHA-L29C567.B366
truthteller609 said:
THIS GUIDE WILL HELP YOU FORCE ENABLE VOLTE ICON SWITCH .WHICH BLOCKED BY HUAWEI SOFTWARE.
IN THIS GUIDE VOLTE ONLY WORKS IF YOUR PHONE AND NETWORK SUPPORT VOLTE.
EXAMPLE MY SIDE MY CARRIER IN INDIA SUPPORT ONLY VOLTE FOR VOICE.BUT FOR HUAWEI OVERSEAS PHONES HUAWEI DISABLED VOLTE FOR MY COUNTRY.THEY ONLY ENABLED VOLTE WHICH SOLD EXCLUSIVE TO THAT COUNTRY.
STEP:
1)UNCLOCK THE BOOTLOADER AND ENABLE OEM UNLOCK
2))ROOT YOUR MOBILE USING SUPER USER OR MAGISK.IF U GOING ROOT THROUGH MAGISK INSTALL ES FILE EXPLORER AND ROOT CHECKER BEFORE ROOT.IF U ROOT THROUGH MAGISK YOU WON T LOOSE AI.BUT WIFI HAS SOME ISSUES.
3)AFTER ROOTING ENABLE PERMISSION IN ROOT EXPLORER.
4)GO TO DEVICE,SELECT SYSTEM,IN SYSTEM SELECT VENDOR,IN VENDOR SELECT BUILD.PROP.
IN BULID.PROP YOU FIND THE LINE COMMAND ro.config.hw_volte_on=true.
ADD THIS COMMAND LINE ro.config.hw_volte_dyn=false BELOW ro.config.hw_volte_on=true line.
it should be like this ro.config.hw_volte_on=true
ro.config.hw_volte_dyn=false
AFTERADDING SAVE AND REBOOT YOUR PHONE.[/YOUTUBE][/YOUTUBE]
I ALSO ADDED VIDEO.
KINDLY TRY AND UPLOAD SCREENSHOT BELOW AFTER U GET SUCCESSFUL ENABLING VOLTE ICON SWITCH.
THANKS MANKINDTW FOR MAGISK ROOT SUPPORT
YOUTUBE LINK
&t=91s
https://www.youtube.com/watch?v=https://www.youtube.com/watch?v=aUfmiDBPczw&feature=youtu.be
Click to expand...
Click to collapse
What is the current firmware of your Mate 9 in which you enabled Volte?