Hey guys i've Hard Bricked my Yureka. Phone Doesnt turn on nor goes to fastbooot, instead is only detected in windows as Qusbs-Bulk. Please help ME
Follow the steps shown in link below;
https://cyngn.com/support/
http://forums.yuplaygod.com/threads/factory-images-and-flashing-tools-official.2178/
But my phone does not boot into fastboot
Search at play god forum, there are some procedures given there which may solve your prob. http://forums.yuplaygod.com/threads/help-completely-bricked.4641/#post-45794
HI thanks for help but in all above cases they were soft bricked ..i.e their phones booted in fastboot but mine isnt.
Hmmm ... seriously worried situation haan. {Kiya kya tumne}
If you can tell us what exactly you did, may be then we can help.
I also hardbricked when i tried to port MIUI. But i got replaced by YU without any cost and within 3 days
Exactly me too flashed miui of f2 without boot.img..Was trying to port...
@ Suhas Is the new phone same as old one or a used one??
suhas.holla said:
I also hardbricked when i tried to port MIUI. But i got replaced by YU without any cost and within 3 days
Click to expand...
Click to collapse
I also hardbricked when i tried to port MIUI, Now waiting for the repacement.
Called them and raised the ticket 6 days before, but they are yet to dispatch.. . . . Very frustrating !
Do you have any information on how to unbrick. I searched much but wouldn't find files to unbrick !
1. 8939_msimage.mbn
2. MPRG8939.hex
3. rawprogram0.xml
4. patch0.xml
Hope some one comes to rescue me :crying:
Video Tutorial HOW TO UNBRICK YUREKA
Srry i cant post the youtube link as i am new here
Just go to youtube
Search kanwal deep unbrick yureka
And watch the video
To go in fastbool mode remove battery insert again and press vol up while connecting usb
quakze said:
I also hardbricked when i tried to port MIUI, Now waiting for the repacement.
Called them and raised the ticket 6 days before, but they are yet to dispatch.. . . . Very frustrating !
Do you have any information on how to unbrick. I searched much but wouldn't find files to unbrick !
1. 8939_msimage.mbn
2. MPRG8939.hex
3. rawprogram0.xml
4. patch0.xml
Hope some one comes to rescue me :crying:
Click to expand...
Click to collapse
ahh Same situation I too searched for that files when i had bricked my device
Since the chipset is new. So not able to find
suhas.holla said:
ahh Same situation I too searched for that files when i had bricked my device
Since the chipset is new. So not able to find
Click to expand...
Click to collapse
I have got rom of Huawei C199s (MSM8939), which has many file packed into UPDATE.APP.
I have unpacked it, but the file name and extensions are unknown.
At present I am trying to identify the msimage.mbm and mprg files.
The rom link is http://www.needrom.com/wp-content/uploads/2015/03/C199s-V100R001C92B260-Telecom.zip
Shrihari007 said:
Hey guys i've Hard Bricked my Yureka. Phone Doesnt turn on nor goes to fastbooot, instead is only detected in windows as Qusbs-Bulk. Please help ME
Click to expand...
Click to collapse
ask for replace in customer care. as they told they will replace your mobile even after unlocking boot loader, root.
my device also gone hard bricked not get into the fastboot mode..
and no customer care no. to contact not correct > this one 18602122122
any help
thnks..
You guys can take a look at this thread -
http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
Hit thanks to the creator and me if helped.
suhas.holla said:
I also hardbricked when i tried to port MIUI. But i got replaced by YU without any cost and within 3 days
Click to expand...
Click to collapse
What did you tell the customer support about your phone getting bricked.
I tried calling the support, but they said that they will chargers. 3000 for replacing .
please help
my device got bricked 2 days ago and now there is no fastboot mode and not even the led lights showing up if the device is connected to the pc!! and whats even worse the cc is not picking up the calls
my mobile also hard bricked.
suhas.holla said:
I also hardbricked when i tried to port MIUI. But i got replaced by YU without any cost and within 3 days
Click to expand...
Click to collapse
hi.... my yu yureka also get hard bricked after installing lollipop update from yu.. please tell me the steps you followed to replace your yureka...... please reply fast...
:crying::crying::crying:
issue regarding in functionality in yu yureka after upgrading with lpllipop
dear sir,
my name is anurag. i am using yureka ao 5510 phone after launching official update for phone i upgrade my phone.
i faced sevral problem after updating. the list are provided below.
1) overheating device than normal one while comparing with kitkat.
2) automatically turned off and un- responsive and on screen multicolor circle appeared wih cross over circle, its upto 5-6 hrs after that suddenly screen appeared after turning on mobile and start working.(in this process sevral times i remove battery & reinsert and trying to start it normally).
3) when phone connecting to wi-fi hotspot network (apple tablet over 3g) and i am trying to update apps from playstore its not updated(google play services unfortunately stopped) over wi fi network, but its working good on mobile data.
4) now currently issue in brightnesss control and in setting < storage option < USB computer connection the checkbox option are not apperared & phone not connected to computer(using windows 8.1 ),
please kindly fix this buges...
and provide some patch or system updates as earliar as possible to overcomethis issue.
good day to alli was looking for an active thread for this kind of tablet but they are all alreay un updated since the unit is already old
i need help with my table due to an issue
i was accidentally wipe the os on my lenovo
so it end bootloop
also the problem is this
when i try to flash the unit using spflashtools
the unit cant detect on the computer
everytime i put on my pc
the computer say unkwon on the device
i already installed the driver directly on the unit
run the autoinstalled driver for my unit
so i was hopping if there is anyone can share a back up file via recovery on your device so that i can install a firmware via twrp i really appreciate your help. i can use my tablet plss i really need help regarding with this
[HELP] [URGENT]
//this is the story, skip if you prefer
so i was updating my cm 12.1 rom to rr 7.1 rom
everything was fine, no real mess just bad flash so i decided to reflash the rom (dunno why i did that actually, its just my tradition). Aaaaand the ROM went flawlessly
next step is install supersu, i checked that the rom is pre-rooted so i think its easier to get supersu via playstore. Installing supersu went flawlessly (again) and i rebooted ma phone.
//then everything starts to f***ed up
my phone bootlooped (not a big deal actually, done with this sh** all the time)
like a casual day, reflash my phone. but i cant go to recovery mode its stuck at logo i think that supersu binary damaged ma recovery.img (again not a big deal but i started to worry) i connect my phone to my pc, summon my adb, and hope the best, but my devices not listed there. then i remembered i forgot to turn on usb debugging on setting oh crap!
so here is my question:
is it possible to turn on usb debugging via pc or something else? if so how.
is it possible to use adb feature without my phone being turned on its usb debugging?
is it possible to repair my recovery <== i mean reflash beside using adb. if so how :crying:
and the last one, beside my phone not listed on adb device list. it wont showed or recognized in my pc (do i need something else beside usb and adb driver?)
any help will be appreciated :good:
this is my only phone so i put my hands on you guys, you're the superhero here
if i dont have any solution, my only way is send this phone to service centre :crying:
some info:
devices : lenovo a6k plus
old rom : cm 12.1 by ED300
new rom: rr nougat v5.8.0 (i dont remember who made this rom, sorry. by the way i found the rom somewhere in xda)
supersu ver: newest per 21 Feb 2k17 (playstore)
my pc: win 8 64x <== dunno if this info useful though
old recovey: twrp (forget the version, but im pretty sure the recovery made by russian developer and it has chicken logo during startup)
battery level when i discovered i cant go to recovery mode: somewhat near 16% <== maybe helpful
if you really care to help me just tell me what do you know, i would appreciate that really, i meant that because this phone is the only way i can contact all of my super important buddy for my business.
Thanks anyway, regards Tom
Well take out the battery and return it hold volum down + power button now you should be able to use fastboot commands go to the folder where you have your adb and fastboot there paste a recovery img file you want to use.Open cmd and type fastboot flash recovery nameofyourimg.img
And now you should be able to use recovery.If not try qfil debricking method that you can find on forum.Best of luck if somthing isnt clear enough feel free to PM me.Also download new recoveries that are now officialy developed
Thanks for replying JovanSijacki
unfortunate enough, i have done that and still dope and nope.
usually i can find my device in windows device manager named android with yellow triangle, but this one is different, my computer wont recognize my phone.
will try debricking method instead, thank you dude :smile:
Thank you for those who care to reply, friend of mine who are expert developer told me how to fix this. AS LONG AS YOU ABLE TO GET INTO FASTBOOT MODE YOU ARE SAFE. Im going to make separate thread to share the tutorial *insert smiley emoji*
Hi everyone i was trying to upgrade my phone's os which is 6.1 to 7.1. i did it with the help of TWRP which failed and my phone was working in recovery mode and. Later was strucked in boot loop. Later i was trying to flash stock rom. But my phone got bricked. It's off for several days it doesn't respond to pressing power buttons nor does it responds to connecting to charger. But while i connect it to computer the new usb added sound comes from computer.
I'm really strucked guys help me out. Every video i see online is for phone which are strucked in boot loop. I'm sure if I'm able to reach that state I'll make it working but for instance ineed to revive it. My friend says i have deleted bootloader how can i put it back ?. Also we disassembled it and assembled it again. It also didn't work.
Well you did something stupid. Upgrading from MM to Nougat without clean flash? Also flashing stock rom with TWRP? Well you can't revive anymore.. If you really Hard bricked buy new phone
Hitler97 said:
Hi everyone i was trying to upgrade my phone's os which is 6.1 to 7.1. i did it with the help of TWRP which failed and my phone was working in recovery mode and. Later was strucked in boot loop. Later i was trying to flash stock rom. But my phone got bricked. It's off for several days it doesn't respond to pressing power buttons nor does it responds to connecting to charger. But while i connect it to computer the new usb added sound comes from computer.
I'm really strucked guys help me out. Every video i see online is for phone which are strucked in boot loop. I'm sure if I'm able to reach that state I'll make it working but for instance ineed to revive it. My friend says i have deleted bootloader how can i put it back ?. Also we disassembled it and assembled it again. It also didn't work.
Click to expand...
Click to collapse
any luck reviving your phone? isn't there something like Odin for ASUS to reflash stock rom back?
Search youtube for asus zenfone max 8939 you will find twrp and 7.0 custom rom. My phone is zenfone max 2016 and I'm using resurrection remix rom.
Hi, so I've been around here for a while and I've had pretty good success with flashing phones.
However, I have a Lenovo A6000 that is hardbricked with Resurrection Remix ROM:
https://forum.xda-developers.com/lenovo-a6000/development/rom-resurrectionremix-5-8-1-t3555184
Followed the destructions and now it is stuck rebooting. I'll see the neat RR logo start and then it will freeze, and then reboot.....over and over. I didn't wipe the phone and start new...thought I could install TWRP and wipe it, flash the new ROM and be done. Nothing like being confident.
So now, it is hardbricked after trying to flash the stock rom....and I cannot figure out how to fix it. Downloaded QFIL, and the stock ROM, installed the Qualcomm drivers, put the phone into Fastboot with VOLUME DOWN + POWER BUTTON and QFIL see's the phone but gets stuck on fail sahara error. I have done countless searches online and the videos I have found don't resolve the problem. Google search turns up no solution. There is a thread here that basically just dies with no solution.
The phone ready for the trash bin?
Also tried Lenovo Downloader and it also gets stuck on step Sahara.
The little cheap phone belongs to a girlfriend of mine (she's a single mom) who has no money to buy a new one, and everyone here knows how awful the stock ROM. So I'm trying to help her out and flash this bugger. I had an A6000 before I bought my MiMax2 and it wasn't a bad little phone after getting RR on it.
Will anyone be willing to help?
?
So no one is willing to help with this problem huh?
From what I can tell the phone is junk now....even though both QFIL and Lenovo Downloader will see it when I plug it in.
Well...thanks anyway.
So who wants to be paid to help fix this problem? You must have PayPal and must be able to solve the problem.
I guess the problem is that a lower version OS can't be installed via QFIL. For example if the phone got bricked in lollipop you can't install kitkat on it via QFIL. Although the same version OS might work (lollipop to lollipop) and of course higher version OS will work.
I have also had some version of QcomDLoader flash tool work where other flash tools simply failed or even older versions of QcomDLoader didn't work.
This is the one that worked for me https://androiddatahost.com/dt3gh9
move firmware (SW_LENOVO BLABLABLA) to loca disk :C
restart pc > then flash again.