This is for Samsung Galaxy Note 10.1 (2014 Edition) LTE P605 (lt03ltexx)
Could work for rooted P600, p601, and many other Samsung devices with 5.1.1
If this break your phone or neck I'm not responsible. You do it on your own risk. It worked for me.
* If you don't need root, you don't have to do this.
1. Root your device first (with stock ROM)
2. Try Screen Mirroring. (*If screen mirroring worked fine you don't need to do anything.)
3. If screen mirroring failed
a. Use a root explorer.
b. take a backup copy of your build.prop file from \system directory
c. Edit the file and at the end of the file add wlan.wfd.hdcp=disable
d. Save the file
e. Restart the device
Now it should work fine.
There are lots of articles to help you how to root and how to flash stock ROM.
Thanks. Fixed my Samsung Galaxy Note 10.1 (2014 Edition) and Samsung Galaxy S5.
To anybody adding this fix don't overlook line d. Save the file and restart.
You are welcome
You are welcome
Superowl said:
Thanks. Fixed my Samsung Galaxy Note 10.1 (2014 Edition) and Samsung Galaxy S5.
To anybody adding this fix don't overlook line d. Save the file and restart.
Click to expand...
Click to collapse
I posted this in this thread where I originally saw your advice: https://forum.xda-developers.com/ga...-hardware-problem-t2982049/page4#post72866194
But I figured I'd come to your thread too.
So I have a rooted Samsung Galaxy tab S 10, I did this process once and it did not work so I replaced the edited build.prop file with the original I saved. Afterwards I decided to give it another try just in case, this time I cut and pasted wlan.wfd.hdcp=disable, saved, checked it was there, restarted and now my device will not restart. All it will do is display SAMSUNG GALXY TAB S POWERED BY ANDROID and vibrate in a pattern, three quick pulses then one pulse, pause, repeat. I can hard restart it but it only goes to the exact same screen. I can't even shut it down, only restart.
So this is a huge bummer. Is this fixable?
I think something went wrong somewhere. Now on my way to work. I'll help you once I'm back. I think it can be fixed.
sathpra said:
I think something went wrong somewhere. Now on my way to work. I'll help you once I'm back. I think it can be fixed.
Click to expand...
Click to collapse
Thank you, I'm also about to be heading out for a while but I'd love to give anything a try in the morning.
I have since found that I can boot it into Odin mode, but not Recovery mode. I don't know anything about Odin mode, but the only thing I've been able to do from there is get it back to the boot screen I mentioned above. Either way still can't shut it down.
fix your tablet first
brokentablet said:
Thank you, I'm also about to be heading out for a while but I'd love to give anything a try in the morning.
I have since found that I can boot it into Odin mode, but not Recovery mode. I don't know anything about Odin mode, but the only thing I've been able to do from there is get it back to the boot screen I mentioned above. Either way still can't shut it down.
Click to expand...
Click to collapse
Download the latest odin to your windows PC
download your firmware file from http://updato.com/firmware-archive-select-model?q=Samsung+Galaxy+tab+S+10&exact=1
Flash it.
Extract (unzip) the firmware file
Download Odin v3.10.7
Extract Odin ZIP file
Open Odin v3.10.7
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutesNow your tablet should be working again.
once it is working let me know
sathpra said:
Download the latest odin to your windows PC
download your firmware file from http://updato.com/firmware-archive-select-model?q=Samsung+Galaxy+tab+S+10&exact=1
Flash it.
Extract (unzip) the firmware file
Download Odin v3.10.7
Extract Odin ZIP file
Open Odin v3.10.7
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutesNow your tablet should be working again.
once it is working let me know
Click to expand...
Click to collapse
This worked, it's restarted and appears to be acting completely normally and my files are intact. Thank you very much.
brokentablet said:
This worked, it's restarted and appears to be acting completely normally and my files are intact. Thank you very much.
Click to expand...
Click to collapse
now you can try
root with CF-Auto-Root
use xplor app you find the file build.prop file from \system directory
look for wlan.wfd.hdcp=disable or wlan.wfd.hdcp=enable
if wlan.wfd.hdcp=enable make it wlan.wfd.hdcp=disable
otherwise add wlan.wfd.hdcp=disable at the end of the file
don't forget backup your files and do a factory reset before trying this
Many thanks!!!
It works for my samsung s5 and also Tab A 2016.
But how about if the cell phone/tablet is not rooted? I guess not everyone want to loss warranty.
Related
I'm having this problem past few days, tried all the links in the Q/A section, dev.. all links were dead.. and managed to found solutions for this problem.
Basically, the tab will stuck on "Samsung" logo and looping for eternity... tried to reflash the rom, wipe system and everything via odin.. will results the same thing...and I thought I'm gonna say good bye forever for my note 10.1 (n8000)...or send for repair (which samsung quoted me ~ $158 for the "board replacement"... but until I found how to get it alive... actually I've no idea what causing my n8000 stuck in the first place..
After a whole day "intensive" searching and everything.. almost all files links in xda were dead.. and finally I found out all the files and solutions..
What you'll need
> Odin 3.xx, can get from samfirmware website
http://www.sammobile.com/firmwares/download/30977/N8000XXUDNE5_N8000OLBDNE3_XME/
> Samsung drivers
http://forum.xda-developers.com/showthread.php?t=961956
> note 10.pit and efs (extract the efs.rar after download, yes it's i9300 but can be used)
> n8000 rom, can get from http://www.sammobile.com/ or development section. I prefer flashable rom in recovery such as android revolution HD, and place it in microsd.
> Philztouch CWM
(files as attached)
Steps to do the recovery
1. Download odin and extract
2. Download drivers and install.
3. Run Odin, place the following files
- click the PIT button, select the note10.pit.
- click the CSC, and select the previously extracted efs.rar..it should be efs.tar now
- click on AP, for custom recovery, such as philz.. or official rom..up to you.
4. Tick the following menus in Odin
- Re-Partition (optional, some users said no need to tick this would do as well)
- Phone bootloader update
- Phone EFS clear
5. Place your n8000 in download mode, and connect via USB.
6. Click on START button.. and hopefully success.
7. Once finishes, reboot into recovery mode (those who flash rom via Odin can skip this), and install the rom zip file.
Everything should be fine now and your n8000 should able to start properly... that's how I managed to "resurrect" my n8000 tho... hope these helps... mine was n8000 16GB, 3G/Wifi version
What is decription key for Mega download?
What is decription key for Mega download?
Also need the description key for the MEGA Downloads please.
description plz
sorry for didnt notice the replies, not sure why my notifications were off.
will reupload again later this, since mega kinda blocked my account details :s
Attached the related files...seems cloud storage failing on me..
Hi there!
I'm new to this and need help understanding what to install under Step 2, which is downloading and installing of Samsung drivers.
I have already unzipped the Samsung driver file but I don't seem to see any installation files. Do I have to plug in my Note to get to this? Or are they installed onto the computer first?
Many thanks, as this could potentially save my Note and save me $500... :fingers-crossed:
boootloop problem
tried all this ,but still my n8000 did not flash through odin properly but failed with error
'Repartition operation failed'
After running odin it says "reset" then the tablet returns to the "Galaxy note 10.1" logo and cycles going black then showing the logo.
When I hold down the power button it shuts off and turns back on again. So no luck for booting into recovery.
Im 99% i'm doing all the steps right.
Thank for your help.
ipoddude95, I have same problem. I tried different computers, different cable, different versions of odin to flash different versions of stock roms. but no success so far...
Similar problem
Hi,
I've got similar problem and I check couple of methods to solve this, unfortunately none was successful.
I tried method described in this thread, but was not successful.
I have old version of TWRP recovery (2.5.0.0). I can load recover but whatever I try to do - clear cache, format data, install recovery using dd it finish with error.
I tried installing new recovery twrp and philz using odin, using heimdall, everything seems to be ok, but when I try to load recovery I've got couple of restarts and then old TWRP loads. I've tried stock firmware, custom, with repartition and without.
I'm guessing that in my case it could be some kind of physical problem with memory.
What I can check more or what to try? How can I determine whether problem may be physical with rom memory?
shaikhmdjohar said:
tried all this ,but still my n8000 did not flash through odin properly but failed with error
'Repartition operation failed'
Click to expand...
Click to collapse
try different port
weird those how i fixed 2 of the n8000, later on will try on my tab again once i got my tab back from my friend
ipoddude95 said:
After running odin it says "reset" then the tablet returns to the "Galaxy note 10.1" logo and cycles going black then showing the logo.
When I hold down the power button it shuts off and turns back on again. So no luck for booting into recovery.
Im 99% i'm doing all the steps right.
Thank for your help.
Click to expand...
Click to collapse
try go to download mode, and reflash recovery
gamesky said:
try go to download mode, and reflash recovery
Click to expand...
Click to collapse
I have, instead of just showing the initial "galaxy note 10.1" screen it goes to the "Samsung" logo with the animation and cycles through that. Still can't get into recovery.
thanks for the help
Hello, i have also this issue with the galaxy note 10.1 gt-n8020, its stucks on samsung logo and doesnt go any further...i dont have a custom firmware neither the tablet its rooted, i tried with odin having the original firmware but when i press start, after the msg "Start write to NAND" i get a FAIL and ends there. Even with the method mentioned here, still i get the FAIL msg...any Info on this on what might be the cause and maybe a possible fix?Can this be also hardware related malfunction?I cant go into recovery mode, only download mode works...
Thank you for the help, my Samsung note 10.1 note went on boot loop about a year ago , i tried so many different ways to flash it and nothing worked. finally got it working with your help.
only problem i encountered was wen i click on (AP, for custom recovery, such as philz.. or official rom..up to you.) it didnt allow me to put the downloaded file in so i used (i9300_repair_efs.tar)
and it worked..
THANK YOU
You Sir are a pinnacle of evolution! Stumbled on this thread by error while going trough history links in my browser and all of a sudden my brick turned to Galaxy Note 10.1!
Only note, I've used i9300_repair_efs.tar for AP like farhaanwireless suggested and device is restoring as I type this
Thanks a ton once more
Agyar said:
You Sir are a pinnacle of evolution! Stumbled on this thread by error while going trough history links in my browser and all of a sudden my brick turned to Galaxy Note 10.1!
Only note, I've used i9300_repair_efs.tar for AP like farhaanwireless suggested and device is restoring as I type this
Thanks a ton once more
Click to expand...
Click to collapse
Can you tell us exact steps you did? Because I am trying without success :\
Also another thing: the i9300_repair_efs.tar it's a rar and when extracted I get a directory with a .md5 file... Is that file that are you using?
Yes, that md5 was used.....
I've went completely by procedure described in first post, with exception of i9300_repair_efs change as mentioned. For that part, I've used latest Odin downloaded from Samsung web, and for bootloader, I've used Odin 3.05, just to be sure, since there is a button with "Bootloader" written on it
Hello, sorry if in bad place, but im new here.
I have a problem with [Samsung Galaxy Tab 4 10.1 SM-T530].
I had a custom rom, but now i flashed stock rom. When it booting i see "Samusng GALAXY TAB4" logo.
I can't find it in the internet because one thing is different. That difference is this, i hear all system sounds, like volume changing, when i touch somewhere, where is a button under this logo, i also hear a touch sound, and voice assistant when i by accident turn on it.
It look like system be turned on, but device showing a mask, wich mask is this Samsung logo.
And sorry for my bad english. ;P
Same for my problem from my SM-T531 before, but I fixed it by flashing the stock ROM made for my tablet.
Fix (I did this on my own without researching. It may work, but try)
I. Find the stock ROM made for your device (SM-T530) then download it. Make sure you select the correct region (Country in which where you bought the device)
II. Download Odin (the latest one)
III. Now open Odin on your PC. (Doesn't matter if you run it with Administrator, but recommended to open it with Admin rights)
IV. Boot your device to Download Mode (Power button+Volume Down+Home button)
V. Connect your device to the PC with the connector that came from the tablet
VI. Odin must detect your tablet
VII. Find and open the zip archive for the Stock ROM then extract the item inside the archive somewhere like your desktop.
VIII. Finished, now browse and find the file you extracted through Odin. (For browsing, click the AP button)
X. WAIT for few minutes!
XI. If it's finished checking the md5 file, check the F. Reset Time and Auto Reboot if not checked yet. Click Start if you're ready.
XII. WAIT for some minutes!!!
XIII. Finished, now it will boot. Remove the cable connector from the PC and wait for minutes
XIV. Now the boot process should show the animated Samsung Logo.
[This process will wipe every single data on your internal storage and /data/data folder so make sure you click the Start button if you really want to clear. I suggest you move the files on your Internal Storage to the computer to be safe. Make backups to be safer.]
Any discrepancies, post to the next reply and I'll fix it :good:
Hey all, new Android user here. I just rooted my device with no problems, but it dies and I recharge it, but it just goes to the "samsung" screen, and will vibrate 3 times quickly followed by another about 1/2-1 second later, then repeat every ~15-20 seconds. I am able to run it in ODIN (download) mode. I was told I need a new rom/firmware, can someone show me how to do this without ruining my device? I didn't save a backup because I assumed I would have no problems
I have had 0 problems before this, and even after root I didn't experience a problem.
Model: SM_G530T
FYI I am a mac user so have downloads be .dmg's.
Thanks in advance! If you need more info, tell me!
bump
pls help I want my phone back
You'll find your stock firmware on samsung-firmware.org
It'll be tar.md5 format, perfectly normal.
Add it into the AP/PDA in Odin and it'll flash fine.
u0aol said:
You'll find your stock firmware on samsung-firmware.org
It'll be tar.md5 format, perfectly normal.
Add it into the AP/PDA in Odin and it'll flash fine.
Click to expand...
Click to collapse
teach me how to upload to odin pls
Make sure all your drivers are installed, turn your phone off, plug the USB into the computer.
Start Odin (right click, properties, run as administrator and in xp compatability mode)
Put your phone into download ode (VOLUME UP, HOME, POWER)
Plug your phone into the computer. Odin will say "added" in it'd output box.
Press the button PDA or AP (depends on version) then select the firmware you just downloaded (tar or md5).
Once loaded into Odin, press start, it'll flash everything and then restart your phone.
Let me know if you need any more help!!
Edit:
Please ensure you are flashing the correct ROM for your phone. Bad firmware or recovery images can cause some bad problems.
u0aol said:
Make sure all your drivers are installed, turn your phone off, plug the USB into the computer.
Start Odin (right click, properties, run as administrator and in xp compatability mode)
Put your phone into download ode (VOLUME UP, HOME, POWER)
Plug your phone into the computer. Odin will say "added" in it'd output box.
Press the button PDA or AP (depends on version) then select the firmware you just downloaded (tar or md5).
Once loaded into Odin, press start, it'll flash everything and then restart your phone.
Let me know if you need any more help!!
Edit:
Please ensure you are flashing the correct ROM for your phone. Bad firmware or recovery images can cause some bad problems.
Click to expand...
Click to collapse
Is there a version of http://developer.samsung.com/technical-doc/view.do?v=T000000117 for mac? Could you give links to everything that I need to download? (I got this https://samsung-firmware.org/downlo...Mobile)/400h/TMB/G530TUVU1AOF8/G530TTMB1AOF8/) Also remember that my phone can't turn on, gets stuck at the T-Mobile part.
acheccone19 said:
Is there a version of http://developer.samsung.com/technical-doc/view.do?v=T000000117 for mac? Could you give links to everything that I need to download? (I got this https://samsung-firmware.org/downlo...obile)/400h/TMB/G530TUVU1AOF8/G530TTMB1AOF8/) Also remember that my phone can't turn on, gets stuck at the T-Mobile part.
Click to expand...
Click to collapse
Not that I'm aware of, but Google is your friend, friend.
Home + Volume Down + Power, that starts your phone in download mode which Odin uses to push software.
Your phone needs to be in download mode to do anything at all with Odin.
Also, why not just spin up a virtual machine and use the windows Odin, Windows is much better for all of this sort of stuff.
I am trying to root my Samsung Galaxy Tab A SM T550, android 6.0.1 and having a problem. The root seems to work fine but upon re-boot I am stuck at the first Samsung Logo. I can’t do anything from there accept go into downloading mode and flash stock recovery and then the tablet works again but isn’t rooted.
I am using this root method; http://www.howtorootphone.com/2016/09/Root-galaxy-Tab-A-9.7-on-6.0.1.html
How to root Galaxy Tab A 9.7
1. Install the USB driver for your tablet into your computer.
2. Enable USB Debugging on your tablet by going to Settings>>Developer options and tick USB Debugging.If your tablet misses Developer options the go to About and tap on Build number 7 times.
3. Power off your tablet and boot into download mode by pressing and holding Volume down, Home and Power button together.
4. Connect your Galaxy Tab A 9.7 to your computer using a data cable.
5. Unzip Odin3 zip file and open Odin3.exe.
6. Make sure that only "Auto Reboot" and "F.Reset Time" is selected in the options menu of Odin.
7. Unzip CF-Auto-Root file and get the root file for your tablet.
8. Click on AP button and select the root file.
9. Click on Start button to begin the rooting process.
Any ideas about what went wrong? Help!!!
Sorry, tried to delete but didn't see how. I think I'll find my answer here; http://forum.xda-developers.com/gal.../root-samsung-galaxy-tab-9-7-sm-t550-t3126827
ahunter said:
Sorry, tried to delete but didn't see how. I think I'll find my answer here; http://forum.xda-developers.com/gal.../root-samsung-galaxy-tab-9-7-sm-t550-t3126827
Click to expand...
Click to collapse
hey i've got the same problem with the same tablet! Did you solve it?
https://forum.xda-developers.com/galaxy-tab/development/guide-twrp-r-t3390115
I did this and this worked for me the same...
But in the last , the reboot screen is there and phone isn't starting . Please help as fast as you can .
Root with super su, go to supersu.com then download the recovery flashable one. If you can't boot to your tablet restore a backup or flash stock rom, hope this helps!
hi dev team.
i bought a note 3 sm-n900l and its converted to sm-9005.
i dont have any idea that it was converted when i checked the imei it is a korean sm-n900l. also LTE is not working.
can anyone help me on how to install stock rom and uprgrade it to 5.0???
thanks
edun213 said:
hi dev team.
i bought a note 3 sm-n900l and its converted to sm-9005.
i dont have any idea that it was converted when i checked the imei it is a korean sm-n900l. also LTE is not working.
can anyone help me on how to install stock rom and uprgrade it to 5.0???
thanks
Click to expand...
Click to collapse
Go to sammobile dot com, go under firmware and then search for your device model. When you find it, scroll down and find the right firmware and download it. When done downloading, extract the zip file into somewhere you easily accessible to you.
Go back to your browser, search up "odin download". Usually its the first link, but make sure that its Odin. Once you have downloaded it, extract the zip file and put it beside your firmware folder.
Now go to odin folder and launch the odin application, and click on the AP button and find the firmware file(its in a .tar or .md5 format) and let odin check the file, don't click anything until odin says leave cs or something like that.
Now for your phone, turn it off and hold the power button, home button and volume down button, till you see a warning page. Press volume up button to continue.
Now plug in your phone to your computer using any usb cable, make sure you see that odin says "Added!" Now you can click on the start button and let the process begin till it finishes. From there everything will be ready for you to set up your phone as normal. Hope I helped you.
You can verify the model # by booting the phone into download mode. The model # in download is the firmware you should flash, nothing else.