Torch Boost - Xperia Z4/Z3+ General

http://forum.xda-developers.com/crossdevice-dev/sony/mod-torch-boost-led-power-using-z1-t2886705
I tried this on my Z4/Z3+ working fine.
I have tried this on the Latest .253 and all previous Firmwares.
Medium Boost is recommended. Otherwise LED gets extremely hot and may get damaged after a minute. Stay Safe

worked perfectly!!
Thanks!!

Related

[Q] leaked 4.4.2, auto-brightness not working.

I'm using 4.4.2 leaked de-odexed rom, everything seems fine so far, other than the few minor things,
but I can't help but notice that my auto brightness is not working at all.
it is not adjusting the brightness of the screen, yet when I check the auto off , and move the slides it works as nothing wrong. so, I can clearly say that this isn't the hardware problem.
is this just me?
Mine is a little sketchy, but it works. Mainly when I unlock. It takes a few seconds to adjust. Stock root 442.
<Note3>

Motherboard problems/Lollipop only

Hello guys,
I'm currently having issues with my phone since I've dropped it in a pond outside, and I guess it's the motherboard that is affected.
I cannot charge my phone (I use a desk changer + another battery), the flash is working only for half a second while taking pictures so I need to manually set the ISO, but those problems are not so important.
The reason I write here is because everytime I flash an official or any other touchwiz based LOLLIPOP OS, the phone is getting through a "plug/unplug". I don't know how to explain, it simply says that it's charging, then after a few seconds it says it's not charging, and so on, WITHOUT having it plugged.
Is there any way to simply delete these instructions from the OS? The phone is working flawlessly otherwise.
These things only happen when using official or touchwiz based LP, the KK ones are working as they should, and it's a bit weird because only with LP I have these problems. Also, if I flash some CM based OS, it's working flawlessly.
Please help.
Thanks in advance.

LED doesn't work since moving from CM12.1 to stock 5.1.1

Hi,
After some issues with CM, I moved to stock 5.1.1. I added xposed and gravitybox for my desired tweaks, and now everything works as I like it except the LED.
It's just dead. Nothing gets it to shine except when charging (so I know it's not a hardware issue).
I've tried with GravityBox's Ultimate Notification feature (I have the paid version), and also other apps like Light Flow, Light Manager, and LED Test, but nothing turns the light back on.
Any ideas? something else to try?
Thanks.

LED Control (Nougat)

Hey all! I know at least a few of us are playing with Nougat on our phones currently. Others have put off installing Nougat because Xposed isn't (yet, hopefully) compatible with Nougat. I went ahead and upgraded, but was reminded how much I missed GravityBox when trying to use my phone last night. I generally charge my phone overnight, but in the dark the charging LED is way too bright and hurts my eyes. None of the LED controlling apps I found in the Play Store, even one that required root, did anything.
So long story short, here you have it. If you root your phone, and install this apk, it'll let you enable/disable the LED at will. I know for sure it works on the Z5C running stock Nougat, and it might well work on other phones and OS versions, though I haven't tested anything else yet.
If there's any interest, I'll continue to develop and test it further. I have plans to add a screen brightness slider, since I found how to dim the backlight lower than the usual lowest setting, and this also helps in the dark, and works better than screen filter apps. Other suggestions would be welcome.
Hope this helps someone else out!
I need to decrease the Notification LED brightness
https://forum.xda-developers.com/showthread.php?t=3573345
Waiting for dim backlight app Thx for your hard work!
luvmdy said:
Waiting for dim backlight app Thx for your hard work!
Click to expand...
Click to collapse
Thank you I've actually given up on Nougat for the time being and am using Marshmallow as my daily driver, so I haven't touched this in a while. I would suggest though that you check out f.lux for rooted Android, because it really helps me out at night

Led light not working on samsung s8

My led light doesng work for my galaxy s8 plus i ha e tried checking the settings, it just doesnt work. The charging led light also doesnt work. It just doesnt work. Have tried to dial *#0*# to check the led setting even in that it doesn't work? Anyone else havjng the same issue?
Just checked mine for you and it works for me in the led tester. Cycles through the 3cilours. You might want to go into safe mode and try that tester again. If it still isn't working... You'll need to cheng your phone
How ti get into safe mode.
And i have been reading various threads that after the latest nougat update it stopped working for people, so im wonderkng if its a software issue or haddware issue
I am having the same problem, it worked when I first got it, then it updated and it stopped working, I have tried everything, even a factory reset, and nothing happens. Also tried the Samsung service menu and nothing.
It's really upsetting the phone is 3 days Old!
I had a note 7 and now This!
Hope the battery doesn't blow up!
Before returning the phone I would do factory reset, also sometimes cycling the setting could get it unstock. Mine worked fine before and after update.
All good and working for me.
There is a similar discussion in a German forum. Seems several people are affected. I cannot post links here, but you'll find it on a known online community site called "android-hilfe" in the Galaxy S8 section.
It happend to my S8+, too. After two days, the LED stopped working, and nothing helped (factory reset etc.). Had to return the phone.
Do you use an app like "Light Manager", "LED Blinker", "LightFlow" or similar?
Users in german forum report, that these apps might cause damage of LED of S8/S8+ :
http://www.android-hilfe.de/thema/benachrichtigungs-led-leuchtet-nicht-mehr.828003/ (german language)
I did not use such an App.
Tatsch said:
Do you use an app like "Light Manager", "LED Blinker", "LightFlow" or similar?
Users in german forum report, that these apps might cause damage of LED of S8/S8+ :
http://www.android-hilfe.de/thema/benachrichtigungs-led-leuchtet-nicht-mehr.828003/ (german language)
Click to expand...
Click to collapse
Forgot that Lightflow was one of the apps Google auto downloaded for me - this was causing my LED to not work right.
Thank you
Hello all.
I am on my second S8+ plus and the LED is now dead again. I use light manager pro and I have the led settings set to start at red when battery is low and then slowly ramp up to green via yellow for 50% to 75% until it hits 76% charge then goes green.
I suspected the app to kill the led in the phone, never happened on my S3, S4, S5 or S6 edge. No root on S8 so it has to use the kernels default brightness settings so it should not be able to kill the LED.....
I suspect that it is simply not built to do more than red, green and blue, when you mix in pinks, orange, purple and more, the thing just dies due to too much power to run all LEDs to create other colors. I think Samsung have gone cheep on us with the notification LED as they believe AOD is the way forward, which out be fine if they could implement a dot on the screen when the display is off, like the notification LED, only AMOLED.
Really upset as I love the rest of the phone but I really use the notification LED a lot and lean on it a great deal.
Same problem here. Stopped working last night after 12 days. I do have Lightflow but it's always worked fine on my S4 and S6.
Returning and replacing today, hopefully.
My S8+'s LED died without using such an app.
G-Tech said:
My S8+'s LED died without using such an app.
Click to expand...
Click to collapse
Are you using AQDG firmware? There is a user reported that AQDD firmware works fine so far, suspected AQDG firmware update could have spoilt it.
https://forums.overclockers.co.uk/threads/galaxy-s8-led-issue.18778041/page-2
I am still waiting for the replacement phone (don't know the sw version). Mine did not get an sw update though so I cannot blame it for the issue (referring to the thread you linked).
Kevin_R said:
Same problem here. Stopped working last night after 12 days. I do have Lightflow but it's always worked fine on my S4 and S6.
Returning and replacing today, hopefully.
Click to expand...
Click to collapse
What baseband firmware version are you using on your device with broken LED?
---------- Post added at 05:32 AM ---------- Previous post was at 05:30 AM ----------
SyLvEsTeR20007 said:
Hello all.
I am on my second S8+ plus and the LED is now dead again. I use light manager pro and I have the led settings set to start at red when battery is low and then slowly ramp up to green via yellow for 50% to 75% until it hits 76% charge then goes green.
I suspected the app to kill the led in the phone, never happened on my S3, S4, S5 or S6 edge. No root on S8 so it has to use the kernels default brightness settings so it should not be able to kill the LED.....
I suspect that it is simply not built to do more than red, green and blue, when you mix in pinks, orange, purple and more, the thing just dies due to too much power to run all LEDs to create other colors. I think Samsung have gone cheep on us with the notification LED as they believe AOD is the way forward, which out be fine if they could implement a dot on the screen when the display is off, like the notification LED, only AMOLED.
Really upset as I love the rest of the phone but I really use the notification LED a lot and lean on it a great deal.
Click to expand...
Click to collapse
What baseband firmware version are you using on your device with broken LED?
mckoo said:
What baseband firmware version are you using on your device with broken LED?
---------- Post added at 05:32 AM ---------- Previous post was at 05:30 AM ----------
What baseband firmware version are you using on your device with broken LED?
Click to expand...
Click to collapse
Hello Mckoo, Jevon Greatorex here. I have been emailing with you regarding this issue.
AQDG is current firmware and the first phone died before AQDG. I remember hoping that the update might fix it.
So you should be considering that the firmware before AQDG could be the cooperate if you think it's related at all.
Jevon
My Led works perfectly and I have all different colours set for my contacts.
I also have edge notifications working perfectly, no red tint, no home button issues, incredible battery life, gmail notifications, no scratches and no issues with bloat.
Did I miss anything? :laugh:
Light Emitting Diode Light?
Sent from my SM-G950F using Tapatalk
choccy31 said:
My Led works perfectly and I have all different colours set for my contacts.
I also have edge notifications working perfectly, no red tint, no home button issues, incredible battery life, gmail notifications, no scratches and no issues with bloat.
Did I miss anything? :laugh:
Click to expand...
Click to collapse
This thread is about a problem. Consider not filling it with bloat and instead give us your base-band number.

Categories

Resources